Used Akira Seiki Rmv 700 Apc for sale (6,175)

Condition: used, Year of construction: 1999, turning diameter 450 mm Hjdpfsvanvnjx Am Tjr turning length 380 mm control FANUC

Condition: ready for operation (used), Year of construction: 2006, operating hours: 12,280 h, functionality: fully functional, machine/vehicle number: NL201FH1430, turning length: 510 mm, turning diameter: 356 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 590 mm, TECHNICAL DETAILS Hedpfsxhf Efjx Am Ter Turning diameter: 356 mm Turning length: 510 mm Swing diameter: 755 mm Standard turning diameter: 275 mm Bar diameter: 65 mm Travel X-axis: 260 mm Travel Z-axis: 590 mm Spindle drive: 15 kW Spindle speed: 5,000 rpm Turret stations / with drive: 12/12 Rapid traverse - longitudinal/flat: 30 m/min MACHINE DETAILS Control: MSX 850 3 Electrical Data Phases: 3 Frequency: 50 Hz Voltage: AC 200 V Rated current: 110 A Rated spindle motor current: 131 A Total power requirement: 32 kW Dimensions & Weight Installation space: approx. 2,320 x 1,783 x 1,819 mm Machine weight: approx. 5.8 t Operating Hours Spindle hours: 12,280 h Machining hours: 13,579 h EQUIPMENT Chip conveyor Extraction unit Tool setting arm Parts catcher Double foot switch

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 398 mm, travel distance Z-axis: 214 mm, total height: 1,800 mm, total width: 1,900 mm, product length (max.): 2,200 mm, number of axes: 2, Horizontal turning machine manufactured in 1998. This DMG Mori Seiki CL-200B features an X-axis travel of 398 mm and Z-axis travel of 214 mm. It is equipped with a Renishaw tool setter and a workpiece catcher that has never been used. The machine has approximately 10,000 operating hours and has always been operated in a single-shift environment. If you are looking to get high-quality turning capabilities, consider the DMG Mori Seiki CL-200B machine we have for sale. Contact us for further details. • Operating hours: approx. 10,000 • Automatic cycle time counter has not reached its limit (indicates relatively low usage) • Operated in single-shift environment • Currently under power Additional equipment • Renishaw tool setter • Workpiece catcher (never used) • Röhm chuck, approx. 1.5 years old Technical Specification Counter Spindle No Hodpfjyxgg Iex Am Ter Driven Tools No

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, operating hours: 12,000 h, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, number of slots in tool magazine: 210, rotational speed (max.): 12,000 rpm, swivel angle C-axis (max.): 360 °, TECHNICAL DETAILS X-axis travel: 560 mm Y-axis travel: 560 mm Z-axis travel: 560 mm Hedevt Sxyopfx Am Tsr Control type: FANUC 16i-M with HPCC Look-Ahead B-axis: 360° x 0.001° Spindle Maximum speed: 12,000 rpm Tool holder: BT40 Tool changer Number of places in the tool changer: 210 Table Pallet changer: 2-way Dimensions: 400 x 400 mm MACHINE DETAILS Spindle hours: approx. 12,000 hours EQUIPMENT - Renishaw tool measurement and breakage monitoring - 70 bar internal coolant supply - CO2 extinguishing unit - Air filter unit - Coolant cooler and paper belt filter system

Condition: ready for operation (used), Year of construction: 2006, operating hours: 16,093 h, functionality: fully functional, turning length: 1,000 mm, spindle speed (max.): 5,000 rpm, controller model: MITSUBISHI M-720BM (MAPPS 2), counter spindle speed (max.): 5,000 rpm, milling spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Turning length: 1,000 mm Main Spindle Max. spindle speed: 5,000 rpm Drive power: 22/15 kW Spindle bore: 73 mm Counter Spindle Max. spindle speed: 5,000 rpm Drive power: 22/15 kW Spindle bore: 73 mm Milling spindle speed: 0 - 12,000 rpm Tool holder: Capto C6 Tool stations: 100 positions Hollow clamping device: 67 mm MACHINE DETAILS Control unit: MITSUBISHI M-720BM (MAPPS 2) Operating Hours Operating hours: 26,875 h Spindle hours: 16,093 h EQUIPMENT Hodpey Eydyofx Am Tsr Y-axis Fully indexable B-axis Chip conveyor, discharge right Standard coolant system Interface for high-pressure coolant system, 70 bar Tool spindle with through-spindle cooling Coolant spray gun Blow air through sub spindle Manual tool presetting on main spindle 3-color signal tower Double foot switch Simultaneous 5-axis machining Automatic power off Tool offset for 5-axis machining Programmable data input Dynamic interchange diameter/radius Stroke check prior to movement

Condition: ready for operation (used), Year of construction: 1999, operating hours: 24,364 h, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: Fanuc MSC 501 (Fanuc 16i), spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS X-axis travel: 560 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Spindle speed range: 10,000 rpm Spindle motor power: 22 kW Rapid traverse (x/y/z): 32 mm/min Tool magazine capacity: 40 (SK40) Pallet size: 2 x 400 x 400 mm Table load: 0.5 t Table indexing: 1° Hedpsyc Unmofx Am Tjr MACHINE DETAILS Control: Fanuc MSC 501 (Fanuc 16i) Total power requirement: 56 kVA Dimensions & Weight Required space: approx. 2.9 x 4.1 x 3 m Machine weight: approx. 8.7 t Operating hours: 24,364 h EQUIPMENT Chip conveyor Interface for internal coolant supply

Condition: ready for operation (used), Year of construction: 2012, operating hours: 45,656 h, functionality: fully functional, machine/vehicle number: AX4E -NAOS 12-160, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, table load: 500 kg, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 730 mm Travel Y-axis: 730 mm Travel Z-axis: 880 mm Max. spindle speed: 12,000 rpm Spindle drive power: 15 / 11 kW Max. torque: 102 Nm Tool holder: SK 40 Distance spindle center to table: 80 - 800 mm Distance spindle nose to table center: 70 - 950 mm Number of pallets: 2 Pallet size: 500 x 500 mm Max. workpiece weight: 500 kg Max. workpiece diameter: 800 mm Max. workpiece height: 1,100 mm Pallet change time: 9.5 s Indexing time: 1.49 s Number of tool stations: 60 Max. tool diameter: 70 mm Max. tool diameter with adjacent stations free: 170 mm Max. tool length: 550 mm Tool-to-tool change time: 0.9 s Rapid traverse: 60 m/min Max. feed rate: 60,000 mm/min Creep feed range: 0 - 5,000 mm/min MACHINE DETAILS Total power requirement: 34 kVA Hsdpfxex I Amij Am Tjr Dimensions & Weight Footprint: approx. 5500 x 3000 x 2800 mm Machine weight: approx. 11.1 t Operating hours: 45,656 h EQUIPMENT Chip conveyor Coolant system Internal coolant supply IF Knoll Tool changer B-axis Pallet changer Oil mist separator Magazine tool breakage control Thread milling Note: Proof of spindle replacement in 2019 is attached.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 5,744 h, functionality: fully functional, machine/vehicle number: 6100000012E, turning length: 393 mm, turning diameter: 228 mm, spindle speed (max.): 3,000 rpm, vice opening: 51 mm, Equipment: chip conveyor, No minimum price – guaranteed sale to the highest bidder! Lathe equipped with a tailstock and chip conveyor! TECHNICAL DETAILS Hjdpfoza D Iwex Am Ter Working range Turning diameter: 228 mm Turning length: 393 mm Distance between centers: 51 mm Spindle speed: max. 3,000 rpm Turret Turret head: Sauter VDI30 MACHINE DETAILS Electrical connection data Voltage: 400 V Frequency: 50/60 Hz Weight: 3,500 kg Operating hours Power-on hours: 20694 Working hours: 5744 EQUIPMENT Chip conveyor with coolant tank and pumps 3 driven tool holders WTO 4 standard holders VDI30 Tool probe Chuck: Kitagawa 210 mm Tailstock Machine manuals External reference: 603

Condition: good (used), Year of construction: 1997, CNC Vertical Machining Center MORI SEIKI Type: SV500-50 Year 1997 Fanuc MSC-518 Control Table: 1100 x 600 mm Hsdpfx Amowa Nvuj Tjr Travel: X 800 - Y 510 - Z 510 mm Rapid traverse 32 m/min Spindle mount: BT50 Spindle speeds up to 6000 rpm Complete documentation available. A clamping magnet is not included in the machine delivery. For further information, see data sheets:

Condition: good (used), Year of construction: 1998, CNC Vertical Machining Center MORI SEIKI SV500-50, Year 1998, Fanuc MSC-518 Control With pallet changer. Table: 1100x600mm Hodpswifzlefx Am Tor BT50 spindle mount, 40-position magazine. Spindle speeds up to 6,000 rpm Travels: X800, Y510, Z510, Rapid traverse 32 m/min Machine without magnetic chipboard. Complete machine documentation available.

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 1063, turning length: 790 mm, turning diameter: 650 mm, travel distance X-axis: 350 mm, travel distance Z-axis: 860 mm, center width: 900 mm, TECHNICAL DETAILS Turning diameter: max. 650 mm Turning length: max. 790 mm Swing over bed: 890 mm Swing over cross slide: 560 mm Distance between centers: 900 mm Travel paths X-axis: 350 (25 + 325) mm Z-axis: 860 mm Main spindle Speed range: 4 – 1,010 rpm Drive power: 37 / 30 kW Max. torque: 3,870 Nm Number of speed ranges: 2 Spindle bearing diameter: 240 mm Spindle bore: 168 mm Max. bar diameter: 144 mm Usable bar diameter: 120 mm Spindle nose: JIS A2-11 Chuck diameter: 610 mm Turret Number of tool stations: 12 Square tool shank height: 32 mm Max. drill shank diameter: 65 mm Tailstock Travel: 680 mm Quill diameter: 110 mm Quill stroke: 100 mm Tailstock taper: MT 4 Feeds Rapid traverse X-axis: 5 m/min Rapid traverse Z-axis: 8 m/min Jog feed rate: 0 – 1,260 mm/min MACHINE DETAILS Control: MORIC T5F Electrical data Total power requirement: 69 kVA Frequency: 50 Hz Space requirement & weight Hsdpfx Ajxb Amgsm Tjr Required space: approx. 6.0 x 3.0 x 2.6 m Machine weight: approx. 9.2 t EQUIPMENT Documentation Coolant system Tool presetting arm Three-jaw chuck Chip conveyor

Condition: excellent (used), Year of construction: 2005, Twin pallet 400 x 400mm, X 560 Y 560 Z 630mm, B 0,001dg. 14.000Rpm BT 40, ATC 60 pos, cooling through spindle, MSX 501, weight 9,800kg Hodpfxoy R Aurj Am Tor

Condition: used, Year of construction: 1996, operating hours: 48,257 h, functionality: fully functional, machine/vehicle number: 299, Mori Seiki SL150 & Iemca short bar feeder. The machine is fully functional. Hodpfjzg A Sajx Am Tjr 12-Station Turret with Tool Holders MSC-518 (Fanuc ) CNC Control 8″ Hydraulic Chuck 2 Step gear spindle for powerful torque Hydraulic Tailstock with Power Quill Chip Conveyor Coolant System. Automatic Lubrication system Parts catcher

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 345 mm, travel distance Z-axis: 995 mm, number of axes: 3, This 3-axis MORI SEIKI SL-403BMC/800 was manufactured in 2002. It features a maximum turning diameter of 650 mm and a maximum turning length of 863 mm. The machine offers an X-axis travel of 345 mm and a Z-axis travel of 995 mm. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI SL-403BMC/800 horizontal turning machine we have for sale. Contact us for further details. • Swing over bed: 710 mm • Swing over cross slide: 738 mm • Max. turning diameter: 650 mm • Max. turning length: 863 mm • Distance between centers: 1,125 mm Hjdjyvf Siepfx Am Tsr Technical Specification Counter Spindle No Driven Tools No

Condition: good (used), functionality: fully functional, APC SMX1500RMI2U UPS System “Function-tested; item originates from the decommissioning of equipment at an automotive supplier.” Manufacturer: APC by Schneider Electric Hjdpfxeyq R Urs Am Tsr Model: SMX1500RMI2U Type: Uninterruptible Power Supply (UPS) Power: 1500 VA / 1200 W Input Voltage: 230 V AC Output Voltage: 230 V AC Outlets: 8 × IEC C13, 1 × IEC C19 Communication: USB, RS-232, SmartSlot Battery Type: Maintenance-free, sealed lead-acid batteries Form Factor: 2U Rack/Tower Special Features: LCD display, AVR, energy-saving mode, expandable runtime

Condition: used, Year of construction: 1996, functionality: limited functionality, travel distance X-axis: 630 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 650 mm, controller model: Fanuc MSX-516, rotational speed (max.): 12,000 rpm, The P8 power supply, valued at €1,500, was only replaced in August 2024! The spindle was repaired in 2017 and has mostly only been used for single-layer operation since then! TECHNICAL DETAILS Travel range X-axis: 630 mm Travel range Y-axis: 600 mm Travel range Z-axis: 650 mm Feed length X-axis: 630 mm Feed length Y-axis: 600 mm Feed length Z-axis: 650 mm Table width: 500 mm Table length: 500 mm Number of pallets: 2 Maximum speed: 12,000 rpm Number of tool magazine slots: 60 (BT40) MACHINE DETAILS Control: Fanuc MSX-516 Phases: 3 Frequency: 50 Hz Voltage: AC 200 V Full load current: 181 A Note: The rapid traverse rate of the X-axis is reduced by 20% to extend the service life of the telescopic guides. The sealing ring during pallet changes is likely defective. The seller temporarily resolved this by inserting a ball valve in between when the pallets needed to be changed. Hsdpfx Aszcuyijm Ter EQUIPMENT Documentation/Manual Chip conveyor

Condition: excellent (used), Year of construction: 2013, CNC Control: M730BM X mm: 1,050 Y mm: 530 Z mm: 510 Worktable dimensions mm: 1,350 x 600 Table load capacity kg: 1,200 Distance spindle nose to table mm: - Cutting feed mm/min X,Y,Z: - Max. rapid traverse m/min X, Y, Z: 30,30,30 Spindle speed rpm: 12,000 Spindle power HP: - Taper type: BT-40 Torque Nm: - Tool changer type: - Tool changer positions: 30 Max. tool diameter mm: 80 Max. tool diameter with adjacent positions empty: 150 Max. tool length mm: 300 Max. tool weight kg: 8 Coolant tank capacity l: - Through-spindle coolant bar: - Hodpfx Amsymxbfj Tor EQUIPMENT Chip conveyor Work light Electronic handwheel BT-40 taper

Condition: refurbished (used), Year of construction: 1996, functionality: fully functional, travel distance X-axis: 420 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 250 mm, rapid traverse X-axis: 48,000 m/min, rapid traverse Y-axis: 48,000 m/min, rapid traverse Z-axis: 48,000 m/min, controller model: Mitsubishi Meldas MSC-802M, The MORI SEIKI TV-30 is a compact and precise vertical machining center, designed for drilling, tapping, and milling operations on small components. Manufactured in 1996, it is equipped with a Mitsubishi Meldas MSC-802M control and features characteristics ideal for high-speed light machining work, with an automatic tool changer and a well-sized table relative to its compact footprint. General Technical Data Brand: MORI SEIKI Model: TV-30 Category: Vertical Machining Centers Year of manufacture: 08-1996 CNC Control: Mitsubishi Meldas MSC-802M Machine weight: 2 tons Machine Dimensions: Length: 1,200 mm Width: 1,720 mm Height: 2,260 mm Hjdpfoxfaw Dox Am Ter Spindle Spindle speed: 8,000 rpm Spindle motor power (cont./30 min): - 3.7 / 2.2 kW (continuous) - 5.5 / 3.7 kW (30 min) Machining Capacity X-Axis travel: 420 mm Y-Axis travel: 300 mm + 60 mm Z-Axis travel: 250 mm Maximum drilling diameter: 13 mm Maximum tapping diameter: M12 Table Table size: 600 x 340 mm Table load capacity: 150 kg Feed Rates Rapid traverse X / Y / Z axes: 48,000 mm/min Working feedrates X / Y / Z in linear interpolation (max): 12,000 mm/min Manual feedrates: 0 – 1,260 mm/min Tool Changer Tool taper: BT-30 Shank: MAS-P30T-1 45° Tool magazine capacity: 10 stations Max. diameter of adjacent tools: Ø 80 mm Max. tool length: 200 mm Max. tool weight: 3 kg Other Equipment Manuals, Electrical Schematics and CE Declaration 100-liter coolant tank with pump Transformer

Condition: excellent (used), Year of construction: 2012, Technical specifications: 5-axis machine: X, Y, Z, C, B Travel distances (X/Y/Z): 500 / 450 / 400 mm Travel range B axis: +110/-5° Travel range C axis: 360° CNC control: SIEMENS 840D Hodpfxeyzzpvj Am Ter Table width: 500 mm Table diameter: 630 mm Table angle adjustable in degrees Max. workpiece weight: 200 kg Number of tool changer positions: 30 Spindle speed: 20 – 10,000 rpm Motor power: 13 kW Dimensions (L x W x H): approx. 3400 x 2550 x 2200 mm Machine weight: approx. 4.8 t Additional equipment: Workpiece measuring probe Chip conveyor Condition: Very good condition, little used, approximately 12,850 operating hours

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 3,500 rpm, travel distance X-axis: 245 mm, travel distance Z-axis: 370 mm, spindle motor power: 11,000 W, overall weight: 2,800 kg, controller model: MSX -805II, number of axes: 2, This MORI SEIKI CL2000B was manufactured in 2008. A robust horizontal turning machine featuring a max turning diameter of 440 mm and length of 363 mm. It includes a 10-station turret and an 8-inch chuck. The control system is the Mori Seiki MSX-805II. Consider the opportunity to buy this MORI SEIKI CL2000B horizontal turning machine. Contact us for more information. Machine Benefits Technical Machine Benefits • Max turning length: 363 mm • Max turning diameter: 440 mm Hsdjx U Dlajpfx Am Ter • Through spindle hole diameter: 73 mm • 8-inch chuck size Extra Information Machine still under power Dimensions Machine Depth 1975 mm

Condition: ready for operation (used), Year of construction: 2014, spindle speed (max.): 6,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 590 mm, spindle motor power: 11,000 W, total height: 2,120 mm, overall weight: 5,500 kg, product length (max.): 2,900 mm, number of axes: 3, This 3s DMG Mori Seiki NLX1500MC/500 horizontal turning machine was manufactured in 2014. It features a maximum turning diameter without interference of 366 mm, X-axis travel of 260 mm, and Z-axis travel of 590 mm. With a spindle speed of 6,000 rpm and a turret with 12 driven stations, consider the opportunity to buy this DMG Mori Seiki NLX1500MC/500 horizontal turning machine. Contact us for further details. • Operating hours: 11,996 • Control: MAPPS M730BL • Max. turning diameter without interference: 366 mm • C-axis: 360,000° • Turning length: 515 mm • Spindle nose: A2-5" • Spindle bore: 61 mm • Bar capacity: Ø 52 mm • Turret: 12 stations (all driven), indexing time 0.25 sec • Driven tools: 6,000 rpm, 5.5 kW • Tailstock: programmable (B-axis), stroke 564 mm • Coolant pump • Oil cooler • Electronic handwheel Hodpfx Aoyg Iclom Tsr • 3-color status lamp • Air-conditioned electrical cabinet • Condition/availability: machine in perfect condition; excellent appearance; very good condition; videos available; immediately available Additional equipment • Chip conveyor • Bar feeder interface • Bar feeder: SAMSYS MULTI-3000 (short bar, 1000 mm) • Hydraulic chuck: KITAGAWA BB208, Ø 165 mm • Collet chuck: HAINBUCH COMBI TOPlus size 65 • HAINBUCH collets: Ø 6.5 – 10 – 16 – 18 – 20 – 25 – 26 – 30 – 40 mm • Square collets: 20×20 – 35×35 – 40×40 mm • Hex collet: 14 mm • Tool measuring probe arm • 7 driven toolholders (3 axial, 4 radial) • 15 static toolholders • Parts catcher • Automatic door opening/closing • Isolation transformer • Documentation & CD-ROM • Transport and handling clamping brackets

Condition: ready for operation (used), Year of construction: 2005, total height: 3,080 mm, table width: 3,275 mm, overall weight: 7,600 kg, product length (max.): 2,000 mm, This 5-axis MORI SEIKI ZV 400 SUPER MILLER was manufactured in 2005. It features an X-axis travel of 600 mm, Y-axis travel of 425 mm, and Z-axis travel of 450 mm. The machine includes a table diameter of Ø 350 mm and a maximum workpiece weight of 200 kg. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI ZV 400 SUPER MILLER vertical machining centre we have for sale. Contact us for further details. • Axis Travels: • X Axis: 600 mm • Y Axis: 425 mm + CUA stroke 75 mm • Z Axis: 450 mm • A Axis Rotation: 360° • B Axis Rotation: −20° / +110° • Distance between table and spindle nose: 65 – 515 mm • Table Diameter: Ø 350 mm • Maximum Workpiece Weight: 200 kg • Table Turning Speed: 30 – 1500 rpm • Tool Magazine Capacity: 50 tools • Maximum Tool Diameter (with adjacent tools): Ø 90 mm • Maximum Tool Diameter (without adjacent tools): Ø 125 mm Hodpfxsynhy He Am Tjr • Maximum Tool Length: 300 mm • Maximum Tool Weight: 8 kg • Rapid Traverse X–Y–Z: 45000 mm/min

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, table load: 350 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis MORI SEIKI NV4000 was manufactured in 2003. It features a CNC control system, typically FANUC/MAPPS, and a vertical machining center design. Key specifications include a 600 mm x 400 mm x 400 mm axis travel, a table size of 700 mm x 450 mm, and a maximum spindle speed of 12,000 rpm. The tool magazine holds up to 40 tools. Consider the opportunity to buy this MORI SEIKI NV4000 vertical machining center. Contact us for more information. Hedpfx Amjx Imuds Tjr • Table size: 700 × 450 mm • Max workpiece size (L × W × H): approx. 750 × 450 × 400 mm • Tool holder type: BT40 (Big Plus option common) • Tool magazine capacity: typically 40 tools • Rapid traverse (X/Y/Z): 42 m/min • Machine technology: DCG – Driven at the Center of Gravity design to reduce vibration and increase accuracy and surface quality Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 1997, travel distance X-axis: 800 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3s MORI SEIKI SV-50s was manufactured in 1997. The CNC milling machine is in good working condition and has been used only a few times for prototype work. It features a FANUC spindle with a speed of 10,000 rpm and a tool changer with 30 positions. Consider the opportunity to buy this MORI SEIKI SV-50 vertical machining centre. Contact us for further details. Hedpfx Ajyk Awfsm Tjr • Condition: Used, in good working condition; reportedly used only a few times for prototype work • Spindle: FANUC (as provided) • Tool changer: 30 positions • Table dimensions: approx. 270 x 250 x 230 mm (to be reconfirmed) Additional equipment • Chip conveyor (based on visual confirmation only) • Tool cabinet / cabinet with tooling • Machine vice (based on visual confirmation only) • Approx. 15 tool holders with collet chucks (based on visual confirmation only) • Elastic collets • Approx. 20 milling cutters, various sizes (based on visual confirmation only) • Dial indicator (noted twice; included once)

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, table load: 500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,000 W, number of axes: 4, This 4s MORI SEIKI NHX 5000 was manufactured in 2011. It features a dual pallet system with a pallet size of 500 × 500 mm and a maximum pallet load of approximately 500 kg. The spindle speed reaches up to 12,000 rpm, with a tool magazine capacity of 40 tools. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NHX 5000 horizontal machining center we have for sale. Contact us for further details. • Pallet system: Dual pallet; size 500 × 500 mm; max load ≈ 500 kg • Tool system: Magazine 40 tools (optional 60 / 120); tool-to-tool ≈ 0.9 s; chip-to-chip ≈ 2.8 s Hsdpfx Aeyh Hzyom Ter • B-axis: Continuous 360°; indexing resolution 0.001° • Rapid traverse (X/Y/Z): ≈ 60 m/min • Accuracy/Construction: High-precision linear guides; thermal displacement control system; glass scales (depending on configuration) Technical Specification Taper Size BT 40