Used Andor-Tech Dv885Jcs-Vp for sale (4,368)

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 460 mm, controller model: FANUC Series 160is-MB, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel ranges X-axis: 600 mm Y-axis: 410 mm Z-axis: 460 mm A-axis: -120 to +30° C-axis: 360° Spindle Speed range: 100 to 12,000 rpm Speed stages: stepless Spindle mount: 7/24 taper, size 40 Spindle bearing inner diameter: 65 mm Distances Distance from table surface to spindle nose: 70 to 530 mm Distance from column front to spindle center: 620 mm Table Work surface diameter: 350 mm Maximum workpiece weight: 200 kg Height of table surface above floor: 1,080 mm Feed rate Rapid traverse X- and Y-axis: 48 m/min Rapid traverse Z-axis: 36 m/min Rapid traverse A-axis: 22.2 rpm Rapid traverse C-axis: 33.3 rpm Working feed rate X, Y, and Z-axis: 1 to 36,000 mm/min Working feed rate A-axis: 22.2 rpm Working feed rate C-axis: 33.3 rpm Tool changer Tool mount: JIS B 6339 BT40 Pull stud: MAS 403 P40T-1 Tool magazine: 20 tools Max. tool diameter: 110 mm Max. tool diameter with adjacent positions occupied: 82 mm Max. tool length from reference line: 300 mm Max. tool weight: 7 kg Bwodpfozpxgrox Ab Djt Tool change time, chip-to-chip: 1.2 s Tool change time, cut-to-cut: 3.8 s MACHINE DETAILS Control model: FANUC Series 160iS-MB

Condition: new, mileage: 500 km, power: 382 kW (519.37 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,850 mm, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MAN TGS 41.520 8x8 with Fassi F705R.2.6 Loading Crane MAN Equipment: * TGS 41.520 8x8 BB CH * 382 kW (520 hp) * TN driver’s cab * Main wheelbase: 2980 mm * 2 batteries, 12 V, 175 Ah * 390 l fuel tank capacity, left side * 35 l AdBlue tank capacity, right side * Air compressor, 1-cylinder, 360 cc * Pneumatically controlled compressed air preparation * Full braking assistant * MAN EVBec high-performance engine brake, multi-stage * Drum brakes * MAN D2676 LF78 diesel engine, 375 kW (510 hp) output, 2,600 Nm torque, Euro 6d * Fuel pre-filter with oil/water separator * Automatic transmission * Front axle tyres: 385/65R22.5 * Rear axle tyres: 315/80R22.5 * Differential locks on driven front axles * Differential locks on driven rear axles * Mechanically operated roof hatch * Central locking with remote control * LED daytime running lights * 2 rotating beacons on cab roof, one right and one left * 2 work lights on cab roof, one right and one left * Exterior mirrors, electrically adjustable with manoeuvring assistance, heated * Preparation for 2 cameras, one linked to reverse gear * Driver’s seat heating * Driver comfort seat, air-sprung * Multifunction steering wheel, height and tilt adjustable Bsdpsywfv Sofx Ab Dewt * 2 sockets, centrally in cab, 12 V and 24 V * Air conditioning, Climatronic * Auxiliary water heater, 4 kW * Interior front windscreen sun visor, foldable * Side window sun blinds * MAN Media System Navigation Advanced 7" * MAN Sound System Advanced with subwoofer * Navigation maps for Europe and Russia * Smartphone integration * Cab topcoat painted in REINWEISS RAL 9010 Crane Equipment: * FASSI F705R.2 TECHNO loading crane * Infinite slewing range * Double knuckle system with PROLINK (knuckle arm can be overextended up to 10°) * Electronic overload protection with FX900 * FASSI stability control FSC-SII incl. LMB II * Emergency stop and optical alarm (at 90% and 100%) * XF system (Extra Fast) + XP system (Extra Power) + FL system (Full Lift) * Radio remote control with linear levers and display of pressure values (in bar and %) * Emergency controls for crane operation * Separate hydraulic tank (260l) with filter and oil cooler mounted at crane base * Hydraulic outriggers, extendable on both sides, support width 8.29m * Outriggers operable via remote control * Standard paint RAL 3020 traffic red – all cylinders painted black * Load hook and mounting brackets (short/500 mm) The complete vehicle specification is available upon request. We are happy to provide further information on request.

Year of construction: 2011, condition: ready for operation (used), A compact ammonia refrigeration system GEA with evaporative condenser and pump-operated plate evaporator is available. Design: split design, refrigeration capacity: 247kW, compressor speed: 1450rpm, evaporation temperature: 0.7°C, condenser capacity: 300kW, wet-bulb temperature: 21°C, max. condensing temperature: 35°C, refrigerant: NH3, max. operating pressure high pressure/low pressure: 23bar/16bar. Secondary refrigerant: electrolysis water, secondary refrigerant temperature inlet/outlet: 6°C/2°C, secondary refrigerant volume flow: 54m³/h, secondary refrigerant pressure drop: 53kPa, refrigerant charge: 50kg, oil charge: 20l, compressor: Grasso 410. Machine dimensions X/Y/Z: approx. 4300mm/2000mm/2800mm, weight: approx. 6500kg. Documentation available. An on-site inspection is possible. Bwjdpfxox Sywae Ab Dot

Condition: ready for operation (used), Year of construction: 2008, Two Meypack case packers from the same packaging line, one in left-hand and one in right-hand version, are available. Packaging type: WA carton, max. packaging capacity: 17cycles/min, infeed height: 1450mm, discharge height: 650mm, multipack length range: 200mm-600mm, multipack width range: 120mm-300mm, multipack height range: 80mm-350mm, blank length range: 360mm-1000mm, blank width range: 300mm-700mm. Machine dimensions X/Y: approx. 5000mm/2450mm, weight: approx. 2500kg. Documentation available. An on-site inspection is possible. Expected to be available starting end of July 2026. Bwodpfx Aoy Rtf Isb Dst

Condition: excellent (used), Year of construction: 2005, ENGEL VICTORY VC 650/150 Tech injection molding machine ENGEL ERC 13/1-F robot – SET 1 Year of manufacture: 2005 Clamping unit design: ENGEL tie-bar-less Clamping force: 1,500 kN / 150 t Control system: ENGEL CC200 – color touchscreen Injection unit: 650 Screw diameter: Ø45 mm Screw stroke: 200 mm Screw L/D ratio: 20 Injection volume: 318 cm³ Injection shot weight: approx. 290 g PS Maximum injection pressure: 2,040 bar Maximum screw speed: approx. 315 rpm Maximum injection flow rate: approx. 179 cm³/s Mold opening stroke: approx. 500 mm* Bwodpfx Aozxqycsb Dot Maximum distance between platens: approx. 700 mm* Nozzle stroke: 350 mm Nozzle clamping force: 67 kN Cylinder heating power: approx. 13.3 kW Number of heating zones including nozzle: 5 Hopper capacity: approx. 80 l Machine weight: 9,500 kg Robot: ENGEL ERC 13/1-F Robot manufacturer: ENGEL Robot year of manufacture: 2005

Year of construction: 2014, condition: ready for operation (used), An ENGEL injection molding machine is offered. Clamping force: 1800kN, opening force: 96kN, max. opening stroke: 750mm, min. mold height: 300mm, max. platen distance: 1050mm, clear tie-bar spacing: tie-bar-less, mold mounting platens X/Y: 880mm/830mm, max. mold weight: 1500kg at center of gravity 230mm, ejector stroke: 180mm, ejector force forward/backward: 80kN/33kN, screw diameter: 55mm, metering stroke: 215mm, max. stroke volume: 510cm³, injection rate: 255cm³/s, max. injection pressure: 2050bar, nozzle stroke: 350mm, nozzle contact force: 67kN, injection unit heating capacity: 16.3kW, heating zones incl. nozzle: 5, barrel: M9 bimetallic barrel, integrated hot runner control zones: 24×220V, mold cooling circuits: 6×10l/min, hydraulic oil capacity: approx. 540l, operating hours: 67423h (as of 30.06.2026). The machine will be available from December. Machine dimensions X/Y/Z: approx. 6275mm/1888mm/2100mm, weight without mold: approx. 12200kg. Documentation available. An on-site inspection is possible. Bwjdjzt Slpepfx Ab Det

Year of construction: 2002, condition: good (used), Build in 2002 Bsdpfx Aed S Su Tsb Dowt

Condition: good (used), Year of construction: 2004, Ref. no.: 18255 Manufacturer: ENGEL Type: Victory 750 / 180 tech Year of construction: 2004 Clamping unit Clamping force: 180 ton Opening stroke: 750 mm Distance between tie bars: 960 x830 mm Mould height min.: 500 mm Opening width: 1250 mm Injection unit Screw diameter: 45 mm Injection volume: 318 cm³ Shot weight: 302 g Injection pressure: 1769/2360 bar Bsdpswm Iz Nefx Ab Dowt Measurements and weight Machine weight: 13500 kg Robot Producer: Wittman Type: W743 Year: 2009 Further information: ENGEL Victory 750/180 Tech – Power, Flexibility and Reliability with Tie-Bar-Less Technology The ENGEL Victory series was specially developed for technical plastic processing and is known as a professional injection moulding machine series offering high energy efficiency and maximum mould flexibility. Unlike conventional tie-bar machines, this series provides a much more flexible working area thanks to its tie-bar-less clamping system. ⸻ 🔍 Advantages of the ENGEL Victory Series ✔ Tie-Bar-Less Design The biggest advantage of the world-renowned ENGEL Victory series is its tie-bar-less construction. This system offers several important advantages: • Larger moulds can be installed easily • Easier access for complex mould geometries • Reduced mould changeover times • Easier robot integration • More efficient use of production space This technology is especially advantageous for automotive, technical plastic parts, packaging and industrial applications. ⸻ ✔ Wittmann Robot Integration The machine has been operated together with a Wittmann robot. Robot specifications: • Wittmann W743-0424 • Year of manufacture: 2009 • Payload capacity: 25 kg • X-axis: 1200 mm • Y-axis: 1600 mm • Z-axis: 4000 mm This configuration provides major advantages for automated production processes. ⸻ 🔍 Machine Operating System The ENGEL Victory Tech series operates with a servo-hydraulic system. ✔ Hydraulic System: • Clamping unit • Injection movements • Ejector system • Mould movements are driven by a high-performance hydraulic system. ✔ Thanks to the servo-controlled hydraulic system: • Only the required amount of energy is consumed • Power consumption is significantly reduced • Quieter operation is achieved • Production stability is improved Unlike older conventional hydraulic machines, the machine does not run continuously at full power. The servo pump system operates only when needed, providing the following advantages: • Lower energy costs • Reduced heat generation • Longer component lifetime • More stable processing conditions

Condition: used, mileage: 97,195 km, power: 265 kW (360.30 HP), axle configuration: 8x4, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro5, total width: 25,500 mm, total height: 40,000 mm, Year of construction: 2010, Equipment: ABS, EBS, For inquiries regarding the vehicle, Mr. Seidel will assist you (at Tel. ...). TGS 35.360 8x4 BB Truck-mounted Crane Crane: Cormach 91000 Tech, 15,726 operating hours, radio remote control, cable winch, front and rear outriggers, trailer coupling: shunting coupling, electric windows, air-suspended driver's seat, radio, cruise control, engine brake, ABS/ASR/ESP, heated exterior mirrors, electric exterior mirrors, differential lock, PTO, halogen headlights, additional headlights: mounted on cab roof at rear, tire tread depth: 1st axle 12-13mm, 2nd axle 12mm, 3rd axle 13-15mm, 4th axle 12-14mm, permissible total weight: 35,000 kg, empty weight: 27,240 kg. Bwedpfxsyfvrls Ab Dst On request, we can provide you with a leasing or financing offer. Mr. Seidel (Tel. ...) is happy to assist you further. For more information, please visit our website. ... Subject to errors, changes, and prior sale! ESP Cab type: Local distribution = Further information = Engine displacement: 10,518 cc Gross vehicle weight: 35,000 kg Next inspection: 2025-11 Please contact Tobias Ebert for further information.

Condition: like new (used), Year of construction: 2024, clamping force: 27,000 kN, ENGEL DUO 36060/2700 TECH Manufacturer: ENGEL Model: DUO 36060/2700 TECH Clamping Force: 2,700 t (27,000 kN) CLAMPING UNIT Clamping force: 27,000 kN Opening stroke: 3,300 mm Max. daylight: 4,100 mm Min. mould height: 800 mm Max. mould height: 2,200 mm Tie bar spacing (H × V): 2,180 × 1,750 mm Platen dimensions (H × V): 2,970 × 2,640 mm Opening force: 770 kN Opening force with pressure pad: 1,600 kN Dry cycle time (Euromap 6): 5.6 s INJECTION UNIT Screw diameter: 190 mm L/D ratio: 25:1 Screw stroke: 850 mm Shot volume: 24,100 cm³ Theoretical shot weight PS: approx. 21.9 kg Injection rate: 2,620 cm³/s Injection pressure (regenerative): 1,300 bar Maximum injection pressure: 1,600 bar Screw speed: 85 rpm Maximum screw speed: 100 rpm Screw torque: 24,000 Nm Reduced torque at max. speed: 20,400 Nm Plasticizing rate (3-zone screw): 238 g/s Plasticizing rate (barrier screw): 296 g/s NOZZLE Nozzle stroke: 1,300 mm Nozzle contact force: 210 kN EJECTOR Ejector stroke: 400 mm Ejector force forward: 420 kN Ejector force return: 420 kN HEATING SYSTEM Heating zones incl. nozzle: 12 Installed heating power: 160.9 kW DRIVE UNIT Installed motor power: 355 kW Bwjdpezvc N Rsfx Ab Dst Reload pump motor: 3 kW Hydraulic oil tank capacity: 3,500 l COOLING REQUIREMENTS Cooling capacity: 66.9 kW Water consumption (32°C inlet): 5.88 m³/h Options: Engel VIPER 90 robot Rectable tie bar (movable) Hotrunners: 160 cores: 3+3 Cascades: 72

Year of construction: 2022, condition: used, functionality: fully functional, machine/vehicle number: 2200390951, TAEevo Tech 081 Special are compact water cooling units suitable for outdoor installation. Includes crankcase heater, phase monitoring, buffer tank, and a large, integrated P3 environmental pump. Special equipment: Color – RAL 9003 Potential-free signal on terminal as follows: Bedpfx Ajztpn Ieb Dowt - Cooling On/Off - Main switch On/Off - Collective alarm signal Cooling capacity 23.6 kW Cold water, outlet/inlet: 7 / 12°C Volume flow rate 4.04 m³/h Ambient temperature 32°C Refrigerant R 410A Electrical data: Voltage 400V, Frequency 50Hz, 3 phases Maximum power consumption 12.04 kW Maximum current 20.2 A Starting current 113.37 A Protection class IP54

Year of construction: 2007, condition: good (used), machine/vehicle number: 073759001, Offer 22489 Technical data: - Cutting range at 90°: - Round: 320 mm - Flat: 320 x 320 mm - Material feed system - Saw band dimensions: 5095 x 34 x 1.1 mm - Cutting speed: 10 to 120 m/min - Hydraulic lifting and lowering of the saw frame - Upper stroke limit of the saw frame - Cutting pressure, infinitely adjustable Bodpfxsim Ildj Ab Dowt - Hydraulic material clamping device - Chip conveyor - Coolant system - Chip removal conveyor: 2500 mm - Drive: 400 V / 4.0 kW - Space requirement: approx. W 2500 x H 1950 x D 2000 mm - Weight: approx. 2200 kg

Condition: new, mileage: 25 km, power: 90 kW (122.37 HP), first registration: 06/2025, fuel type: electric, axle configuration: 4x2, fuel: electricity, color: black, gearing type: automatic, emission class: euro6, Year of construction: 2024, Equipment: ABS, air conditioning, airbag, central locking, cruise control, full service history, onboard computer, power assisted steering, power mirror, = Additional Options and Accessories = - Passenger airbag - Third brake light - Driver airbag - Remote central locking - Height-adjustable driver's seat - Height-adjustable steering wheel - Multifunctional steering wheel - Rear parking sensors - Radio/CD player - Rearview camera - Bumpers in body color = Additional Information = Bwodpezmg Tusfx Ab Dot Number of doors: 5 Cabin: standard Torque: 245 Nm Battery: 52 kWh, condition: 100% Charging port: Type 2 Number of phases of the charger: 3 Battery charging power: 22 kW Interior: gray Manufacturer: Nijwa Used Trucks Vormerij 12 7621HL BORNE, NL

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Working area X: 3280 mm Working area Y: 1250 mm Electrospindle Drilling heads for vertical drilling: 12 Drilling heads for horizontal drilling X: 4 Drilling heads for horizontal drilling Y: 2 Blade for grooving in the X direction 8-position turret tool changer 10-position linear tool changer on the right side 1 additional milling motor with 2 outputs Work table with 6 stops Programming software: Xilog Plus Control panel 1 vacuum pump with a capacity of 90 m3/h Safety guards Approximate weight: 2500 Kg Available starting November 2026 Bwodpfozwgkbox Ab Det

Condition: new, - Practical clamping system for panels, for trimming the underside and processing without intermediate storage of cut-offs - Comfortable height adjustment of the clamping jaws via control panel - Smooth and ergonomic operation - Modular welded machine frame, torsion-resistant and self-supporting - Scoring device for tear-free cutting quality - Automatic retraction of slatted frame during sawing - Central workpiece support for maximum flexibility - Easy switching between vertical and horizontal processing - Digital stop gauge - Transport wheels liftable via pedal for easy moving of heavy panels - Durable and precise material support for stable workpiece position - Pneumatic locking of the saw carriage Bwjdpfx Abewnrf Us Dot - Large opening for saw blade change Extraction connection: - Extraction nozzle diameter: 100 mm - Extraction air requirement min.: 1800 m³/h - Air speed min.: 20 m/s Equipment: - Lower material support: metal rollers - Retractable slatted frame: automatic - Vertical measurement display: digital - Horizontal measurement display: digital - Panel clamping system - Locking of saw carriage: pneumatic - New exhibition machine -

Condition: used, Year of construction: 2015, machine/vehicle number: AA1/018167, functionality: fully functional, operating hours: 18,050 h, input voltage: 400 V, input current: 59 A, workpiece length (max.): 3,300 mm, workpiece width (max.): 1,400 mm, workpiece height (max.): 180 mm, number of axes: 5, number of slots in tool magazine: 26, total height: 3,500 mm, total length: 6,000 mm, total width: 3,500 mm, year of last overhaul: 2025, Equipment: documentation/manual, We are offering this used SCM Tech Z5 machining center for sale. Built in 2015, it is a 5-axis CNC machine, currently connected and ready for demonstration. Technical data and features: • Model: SCM Tech Z5 • Type: AA1/018167 • Year of manufacture: 2015 • Machining area: 3,300 × 1,400 × 180 mm • Axes: 5-axis design • Control / Software: Maestro Version 1.00.022.1034 (3D drawing and milling) • Includes Clemex system • Additional licenses: 1 x 3D dongle, 2 x 2D dongle • Connection: 400 V / 59 A • Vacuum pump: Type Q2EFA132M6C-34 • Tool package with approximately 20 cutters (including DIA cutters, indexable insert cutters, roughing cutters, cove cutters, and rounding cutters). If you have any questions or require further information, please feel free to send us a message or call us. Bwedeynwu Tjpfx Ab Det

Condition: used, functionality: fully functional, machine/vehicle number: 1028789976479, input voltage: 380 V, input frequency: 50 Hz, used Muhr & Bender Bsdpfxey Tip Is Ab Dewt Price negotiable

Condition: used, functionality: fully functional, Year of construction: 1997, machine/vehicle number: VP600 760 01, used Mubea VP 600/760 Price: VP Bwsdpfjy Tihwsx Ab Det

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, The Arol Closys Eagle VP capping machine is an essential tool for companies looking to optimize their vacuum packaging process. It offers an effective solution for hermetically sealing 84 mm diameter jars, thereby guaranteeing optimal product preservation. Thanks to its advanced technology, it ensures a perfect vacuum inside the containers. As a result, the shelf life of food products is extended, and their quality is preserved. Furthermore, the capping machine is equipped with a lid-loading system, which simplifies the process and increases productivity. Moreover, the Arol capping machine stands out for its reliability and robustness, ensuring long-term use. In addition, it integrates easily into existing production lines, allowing for a smooth transition. On the one hand, its operation is simple and intuitive, reducing staff training time. On the other hand, it helps to increase yield without compromising the quality of the final product. As a result, companies can improve their competitiveness in the market. By choosing the Arol capping machine, you are opting for a machine that has proven its worth in numerous industries since 2011. Consequently, it meets the strict requirements for hygiene and food safety. In summary, this capping machine is the ideal tool for improving the efficiency of your packaging chain while ensuring customer satisfaction. Bodpfju Nwiyex Ab Djwt Technical specifications: Jar diameter: 84 mm Vacuum capping machine Lid-loading system Year: 2011

Condition: good (used), Year of construction: 2009, clamping force: 1,500 kN, Equipment: documentation/manual, ENGEL VC 1050/150Tech Screw: Ø 50 mm Bjdpfjy Rn E Asx Ab Dswt CLAMPING UNIT Clamping force: 1500 kN Opening stroke: 607 mm Ejector stroke: 150 mm Ejector force: 61 kN DRIVE Pump drive power: 30 kW INJECTION UNIT 1 Screw diameter: 50 mm Max swept volume: 422 cm³ Screw speed max: 250 r/min Screw speed current: 250 r/min Injection rate: 210 cm³/s Injection rate incr.: 165 cm³/s Spec. inj. pressure: 1955 bar Spec. inj. pressure+: 2332 bar Nozzle stroke: 350 mm Nozzle cont. pressure: 67.2 kN

Condition: excellent (used), Year of construction: 2012, clamping force: 160 kN, ENGEL VC 1050/160 Tech – Clamping unit Clamping force: 1600 kN Opening stroke: 608 mm Ejector stroke: 150 mm Ejector force: 61 kN Screw diameter: 45 mm Max. swept volume: 342 cm³ Screw speed max: 290 r/min Screw speed max (current): 290 r/min Injection rate: 170 cm³/s Injection rate (increased): 134 cm³/s Specific injection pressure: 2403 bar Specific injection pressure (increased): 2404 bar Nozzle stroke: 350 mm Nozzle contact force: 67.2 kN Bwodpfx Aex Up T Nsb Dst Type: Horizontal Drive: Hydraulic hours: 53.000h

Condition: good (used), Year of construction: 2013, Engel Victory 200/50 tech (2013) Technical Specifications: 1. Machine model: ENGEL VC 200/50 Tech 2. Clamping force: 500 kN (50 tons) 3. Opening stroke: 408 mm 4. Ejector stroke: 100 mm 5. Ejector force: 39.8 kN Injection Unit (30 mm screw): 1. Screw diameter: 30 mm 2. Max. swept volume: 99 cm³ 3. Max. screw speed: 480 rpm 4. Injection rate: 144 cm³/s 5. Increased injection rate: 95 cm³/s 6. Specific injection pressure: 1451 bar 7. Increased specific injection pressure: 2205 bar Bjdpozmg Nvsfx Ab Dswt 8. Nozzle stroke: 230 mm 9. Nozzle contact force: 28.3 kN Control panel : CC200 Core pull 2-fold - movable clamping plate Hotrunners 16 circuits. Nozzle orifice 12mm Multi-level conveyor belt, ENGEL safety guards for robots.

Condition: new, Year of construction: 2025, clamping force: 6,500 kN, Equipment: documentation/manual, ENGEL duo 3660/650 tech Year: 2025 Control: CC300 Integrated robot: ENGEL VIPER 40 Bodpfsza Au Nox Ab Dewt Clamping force: 650 t Injection unit: 810 Screw diameter: 80 mm Possible screw diameters: 55 / 60 / 70 / 80 mm Shot volume: 1810 cm³ Injection capacity: 1660 g PS Injection pressure: 1800 bar (max. 2000 bar) Injection speed: 493 cm³/s Screw stroke: 510 mm Screw torque: 3600 Nm Max. screw speed: 210 rpm Plasticising rate: up to 118 g/s Nozzle orifice: 12 mm Tie bar distance (H x V): 1110 x 960 mm Platen size (H x V): 1510 x 1440 mm Opening stroke: 1800 mm Max. daylight opening: 1950 mm Mould height min./max.: 350 - 1200 mm Dry cycle: 2.8 s Ejector stroke: 250 mm Ejector force: 105 / 51 kN Installed drive power: 74 kW Oil tank capacity: 750 l Equipment: * ENGEL VIPER 40 integrated robot * 2-fold hydraulic core pull on moving platen * Tool heating with 32 control circuits * Hydraulic machine

Condition: good (used), Year of construction: 2011, ENGEL Victory 200/50tech with integrated Robot Viper 12 Control panel : CC200 Core pull 2-fold - movable clamping plate Hotrunners 16 circuits. Nozzle orifice 12mm Multi-level conveyor belt, ENGEL safety guards for robots. Technical Specifications: 1. Machine model: ENGEL VC 200/50 Tech Bwjdpezmg Rmsfx Ab Dst 2. Clamping force: 500 kN (50 tons) 3. Opening stroke: 408 mm 4. Ejector stroke: 100 mm 5. Ejector force: 39.8 kN Injection Unit (30 mm screw): 1. Screw diameter: 30 mm 2. Max. swept volume: 99 cm³ 3. Max. screw speed: 480 rpm 4. Injection rate: 144 cm³/s 5. Increased injection rate: 95 cm³/s 6. Specific injection pressure: 1451 bar 7. Increased specific injection pressure: 2205 bar 8. Nozzle stroke: 230 mm 9. Nozzle contact force: 28.3 kN

Condition: new, mileage: 60 km, power: 87 kW (118.29 HP), fuel type: electric, axle configuration: 4x2, wheelbase: 4,220 mm, fuel: electricity, color: white, driver cabin: day cab, gearing type: automatic, total length: 6,450 mm, total width: 2,100 mm, total height: 2,310 mm, permissible axle load (axle 1): 1,850 kg, permissible axle load (axle 2): 2,100 kg, Year of construction: 2026, Equipment: ABS, EBS, air conditioning, central locking, cruise control, electric window regulation, power assisted steering, power mirror, tail-lift, = Additional Options and Accessories = - Heated exterior mirrors - Co-driver's seat Bsdowzizyjpfx Ab Dswt - Driver's airbag - Remote-controlled central locking - Cruise control - Height-adjustable driver's seat - Height-adjustable steering wheel - Air conditioning - LED daytime running lights - Front center armrest - Radio with DAB, MP3, and Bluetooth 4.0 - Side door - Immobilizer - Heated windshield - Partition = Additional Information = General Information Number of doors: 2 Year of manufacture: 2026 Cab: single Axle Configuration Front axle: Max. axle load: 1850 kg; steered Maximum rear axle load: 2100 kg Weights GVWR: 3,500 kg Functional Tail lift: D'HOLLANDIA DH-LMA.08, tailgate, 750 kg Condition Overall condition: very good Technical condition: very good Optical condition: very good