Used Aore F3015 3Kw for sale (376)

Year of construction: 1987, condition: ready for operation (used), A three-roll plate bending machine Kramer is available. Working width: 2000mm, max. plate thickness: 3mm, power: 3kW. An on-site inspection is possible. Kjdsyttv Rspfx Aqqsdr

Condition: ready for operation (used), Two heat-resistant flat belt conveyors Integra are available. 1) Center distance: 15200mm, belt length: 15800mm, belt width: 1180mm, overall height: 600mm, belt width: 800mm, max. operating temperature: 130°C, conveying capacity: 30t/h, motor power: 3kW. Including spare edge protection rubber and motor bracket. 2) Center distance: 7500mm, belt length: 8100mm, belt width: 1080mm, overall height: 600mm, belt width: 800mm, max. operating temperature: 130°C, conveying capacity: 30t/h, motor power: 3kW. Including 6× Kito chain hoists. Documentation available. An on-site inspection is possible. Kedpfx Ajy Hvq Eeqqjdr

Year of construction: 2009, condition: ready for operation (used), Throughput: approx. 150 jars/min, foreign body detection capability for glass fragments: from approx. 3 x 3 x 3mm, metal: from approx. 1 x 1 x 1mm, stones and bones: from approx. 3 x 3 x 3mm, suitable for glass containers, tinplate cans, beverage cartons (carton bricks), and plastic containers, typical false rejection rate per 10,000 inspected products: approx. 7, maximum container diameter: 155mm, maximum inspection speed: 100m/min, standard sensor speed: 45m/min, sensor height: 256 to 410mm, pixel size: 0.4 x 0.4 to 0.8 x 0.8mm, rejection system: electropneumatic cylinder, operator interface: 17 inch touchscreen, remote access: Ethernet or modem, frame material: AISI 304 stainless steel, sensor protection class: IP55, power supply: 3 phase + protective earth (3PH + GND), operating voltage: 400V, machine power consumption (2 motors): 3kW, processing unit power consumption: 500W, high voltage generator: 0.3 to 1kW, electrical cabinet protection class: IP55, X-ray radiation: 0.1µSv/h, compressed air operating pressure: 4 to 6bar, air consumption: 50Nl/min, infeed and outfeed height: 1305mm, screen and operating height: 1070mm, length: 2890mm, width: 1000mm, height: 2525mm, weight: 1.3t. Equipped with a reject system for contaminated containers and a conveyor belt. The machine was in operation until 2024. Inspection on site is possible. Kodpfxozhw S Re Aqqsdr

Year of construction: 2023, condition: ready for operation (used), A relatively modern corona pretreatment system for single sided aluminum foil coating is available. Material: aluminum foil, intended use: coating, coating sides: 1, web width: 1350mm, treatment width: 1450mm, treatment speed: 3m/min, roll diameter: 125mm, roll length: 1550mm, generator type: Softal 9030, generator power: 3kW. Total system dimensions X/Y/Z: approx. 2000mm/1550mm/1700mm, weight: approx. 1500kg. Including ozone exhaust system RD 4. Documentation available. An on site inspection is possible. Ksdpsyrta Hjfx Aqqsdr

Year of construction: 1989, condition: ready for operation (used), Four Neff single-column presses are available. 1) Neff T 6.3, year of manufacture: 1989, output: 3kW. 2) Neff single-column press, operating hours: 9097h. 3) Neff EP 10 single-column press, year of manufacture: approx. 1950. 4) Neff single-column press. On-site inspection is possible. Kedovyirkopfx Aqqjdr

Year of construction: 2023, condition: ready for operation (used), A foldable tube furnace from Thermconcept is available. Maximum temperature: 1100°C, heated length: 500mm, constant zone: 160mm, recommended tube diameter/length: 70mm/750mm, power: 3kW, dimensions X/Y/Z: 650mm/500mm/510mm. Documentation available. Kdjdpfx Aqstxb Apeqor

Condition: ready for operation (used), Year of construction: 2009, A wood dust extraction and filtration system Krämer for saw lines is available. 1) Wood dust extraction unit Krämer VKA-P 100/650/55, air volume flow: 27000m³/h, pressure increase: 3800Pa, motor power: 55kW, V-belt length: 3550mm. 2) Filtration unit Krämer GFS Shake 160/25/250, filtration capacity: 30000m³/h, filter material: polyester needle felt, material discharge: TFS40/10/1.1. 3) Fan Krämer VFM-R 45/250/3, air volume flow: 3000m³/h, pressure increase: 2500Pa, motor power: 3kW. 4) Fan Krämer VFM-P 42/200/4, air volume flow: 2500m³/h, pressure increase: 3000Pa, motor power: 4kW. 5) Separator tank/filter hopper Krämer. 6/7) 2x axial fans. Including pipes and peripheral equipment. The motor flange on the discharge motor is defective. Documentation available. An on-site inspection is possible. Kdsdpjxl Elgsfx Aqqor

Year of construction: 2017, condition: ready for operation (used), Flywheel diameter: 700mm, worktable dimensions: 694x1010mm, cutting capacity: 430x680mm, flywheel width: 40mm, band speed: 2800/min, flywheel speed: 782/min, saw band length: 5040-5190mm, motor power: 4HP, connected load: 3kW, noise level: 82 dB(A), net weight: 375kg. An on-site inspection is possible. Kedpfx Asw S Tytsqqedr

Year of construction: 2013, condition: ready for operation (used), A self-built powder welding machine with a power source Kennametal and an MTA cooler for applying Stellite to valves is available. 1) Cooler MTA TAE EVO 10M, year of construction: 2013, cooling capacity: approx. 3kW, refrigerant: R407, filling quantity: 0.8kg, max. operating pressure: 28bar, flow rate: approx. 0.59m³/h. Machine dimensions X/Y/Z: approx. 600mm/600mm/800mm, weight: approx. 100kg. 2) Power source Kennametal Stellite PTA Junior Star, year of construction: 2013, open circuit voltage: 75V, welding current range: 10A/10V-250A/38V, protection class I. Documentation available. An on-site inspection is possible. Kedpfx Asxwn Nleqqodr

Year of construction: 2023, condition: ready for operation (used), A Mark compressor unit including a Kaeser compressed air receiver is available. 1) Mark RMA 11 IVR compressor, year of manufacture: 2023, operating pressure: 7bar, max. pressure: 13bar, max. temperature: 43°C, power: 3kW, weight: approx. 250kg. 2) Kaeser 500/3110 compressed air receiver, year of manufacture: 1999, max. pressure: 11bar, max. temperature: 120°C, volume: 500l. Documentation available. An on-site inspection is possible. Kedpjzhw Tzofx Aqqjdr

Condition: used, Specialty oven for potato products. Perfectly suitable to fry formed potato mash products, potato croquettes or hash brown in all kinds of shapes made of potato slivers, potato noisettes, cone croquettes, pommes dauphines, pommes duchesses, chips (French fries), … Zonal Flow Principle 3-point oil flow control Net belt width ± 1.400 mm Net belt length ± 9.000 mm External heat exchanger: Not included Electromechanical hood lift Mesh opening 3mm (stainless steel wire eye belt) Oil level control Product height max.: ± 120 mm Inlet height: ± 1.650 mm Outlet height: ± 1.500 mm Adjustable height of upper belt with drivers Suitable for CIP Suitable for Fire protection Inspection hatches at the top of the hood Insulated hood Kdodpfezk Dymox Aqqor 1 exhaust chimney Dimensions (L x W x H): 12.500 x 2.580 x 2.470 mm (closed position, top of hood, without extraction) Filter station with belt filter Oil pump Cornell 5RB-F16K 35 m³/h, Oil temperature 180°C 37 kW, 1,482 RPM 400V-50Hz IE3-CoS, 0.83% Dimensions (L x W x H): 3.200 x 2.300 x 2.000 mm + Blackmer NP3F Pump for emptying fryer SEW 3kW 220 - 400 V 258 RPM 50 Hz, 6.2A IE2-CoS 0.82%

Year of construction: 2026, condition: new, The 600L horizontal ribbon mixer is equipped with a special ribbon agitator located in the center of the tank along its entire length. The entire machine is made of 304SS stainless steel. - Capacity: 600L - Motor: 3kW, 3-phase, 50Hz - Machine weight: 360kg - Machine dimensions: (L 2050 x W 780 x H 1430mm) - Mixers available from 400L to 3500L The mixer's interior and ribbon itself are highly polished, significantly simplifying and accelerating mixing and facilitating cleaning after use. These mixers are used for mixing bulk materials. Kdodpfszuxw Ijx Aqqer They are primarily used in the chemical, food, pharmaceutical, agricultural, and construction industries.

Condition: excellent (used), CATALOGUE NUMBER 7958 TECHNICAL DATA - Maximum cutting height: 120mm - Shaft width: 510mm - Shaft diameter: 75mm - Maximum sawblade diameter: 400mm Kdjdpfozulypjx Aqqer – From above: - 2 rows of anti-kickback fingers - toothed feed roller - toothed outfeed roller – From below: - anti-kickback fingers - 2 toothed feed rollers - arbor with sawblade - toothed outfeed roller - 6 feed speeds - Hydraulic motor (for extension, feed, rollers): 3kW - Main motor: 22kW - Infinitely variable feed speed - Control stand dimensions: 700x600x1000mm - Overall dimensions (L/W/H): 2300x1450x1600mm - Weight approx. 2650kg ADVANTAGES – Turkish production – Robust construction – Used machine, in very good condition Net price: 37,900 PLN Net price: 9,020 EUR depending on the exchange rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), Catalogue number: 7866 TECHNICAL DATA - Max. blade diameter: 300mm - Blade bore diameter: 30mm - Blade guard - Cutting height with installed blade: 250mm, 60mm - Max. cutting width: 600mm - Ability to cut at an angle in the vertical plane – arm or blade movement - Arm rotation left/right - Motor: 3kW - Table size: 1130x1010mm - Extraction port diameter: 50mm - Dimensions (LxWxH): 1150x1190x1510mm - Weight: 220kg ADVANTAGES – Italian-made – Not repainted Kodpfx Aqszkg H Njqedr – DTR technical documentation – Very good condition – Used saw Net price: 6,500 PLN Net price: 1,550 EUR (based on an exchange rate of 4.2 PLN/EUR) (Prices may change subject to exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7736 TECHNICAL DATA - shaft width: 410mm - number of knives: 4 - noise-damping comb at the shaft - table length: 2530mm Kjdpfezkrqgox Aqqsdr - brake - cast iron tables - both tables adjustable - original, angle-adjustable guide - motor: 3kW - extraction port diameter: 140mm - dimensions L/W/H: 2530x850x1350mm - weight: 680kg ADVANTAGES – manufactured in Poland – 4-knife shaft – brake – upper control panel – noise-damping comb at the shaft – DTR documentation – used jointer, in very good condition Net price: 12,900 PLN Net price: 3,070 EUR depending on 4.2 EUR rate (Prices may vary with significant exchange rate fluctuations)

Condition: ready for operation (used), Year of construction: 1975, A Bosch OBD 10/53L 12 and a Bosch OBD 15/54L 17 are available, strip width: 250mm, usable height: 260mm, number of furnace doors: 3, doors: inlet, intermediate and outlet door, strip speed: 1.8m/min, cycle time: 25min, cycle distance: 700mm, operating temperature of decarburizing zone: 760°C, operating temperature of bluing zone: 550°C, heating capacity of decarburizing zone: 84kW, heating capacity of bluing zone: 18kW, evaporator heating capacity: 3kW, evaporator water consumption: approx. 0.5l distilled water/h, energy consumption: approx. 45kWh/100kg net weight, total decarburizing time: 150min, cycle time: 25min, cycles in the decarburizing zone: 6, decarburizing zone temperature: 760°C, holding time: 30min, propane/air ratio for protective gas generation: 1:18, protective gas quantity: approx. 35Nm³/h, propane quantity: 2Nm³/h, air quantity: 36Nm³/h, combustion tower temperature: 1250°C, dew point or cooling water temperature of direct cooler: 23.5-25.5°C, total bluing time: 75min, cycles in the bluing zone: 3, bluing zone temperature: 550°C, holding time: 50min, evaporator temperature: 120°C, total connected load: 111kW, length: 14,200mm, width: 1650mm, height: 3000mm, with an Exogas Generator Gebrüder Hammer GmbH and documentation. An on-site inspection is possible. Kdjdpfx Aqoztrbwsqjr

Condition: excellent (used), CATALOG NUMBER 7613 Technical specifications: - Feed opening width: 650mm - Feed opening height: 300mm - Shaft width: 660mm - Knife length: 660mm - Number of knives: 2 pcs - Screen dimensions: 90x100mm - 2 lower toothed feed rollers - Lower roller motor: 3kW Ksdpfx Aqezadr Njqedr - 2 upper toothed feed rollers - Upper roller motor: 3kW - Belt feeder - Feeder belt length: 2700mm - Feeder belt width: 630mm - Main motor: 75kW - Autoreverse - Reverse gear - Overall dimensions (L/W/H): 5350x1300x1300mm - Weight: 4200kg FEATURES – Made in Italy – Autoreverse (adjustable) – Reverse gear – Used chipper, in very good condition Net price: 149,900 PLN Net price: 35,690 EUR (based on 4.2 PLN/EUR) (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7606 Kodpfx Aqoztzlxjqodr Technical data: - Shaft width: 500mm - Number of knives: 3 pcs - Shaft guard - Table length: 2530mm - Cast iron tables - Both tables adjustable - Original cast iron fence adjustable at an angle - Motor: 3kW - Dimensions (L/W/H): 2530x1000x1100mm - Weight: 920kg ADVANTAGES – Made in Italy – 3-knife shaft – Used jointer – Very good condition Net price: 8,900 PLN Net price: 2,100 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalog number 8033 TECHNICAL DATA max. width of the workpiece – upper shaft 510mm max. width of the workpiece – lower shaft 450mm max. thickness of the workpiece, processed on both sides 200mm – from above: feed roller Kdjdpfx Asztziwjqqjr ratchets 1 metal, toothed feed shaft 2 metal, sequential feed shafts 1 metal, toothed feed shaft pressure roller planing shaft 510mm, 4 knives, with the possibility of installing profile knives approx. 7.5kW smooth, metal feed shaft upper pressure roller at the outlet with 2 feed rollers – from below: adjustable infeed table with guide planing shaft 300mm, 3 knives 3kW slip feed shaft, metal planing shaft 450mm, 4 knives 5.5kW 2 smooth, metal feed shafts – from the back: 2 side spindles 1) vertical, right 150mm 4kW 2) vertical, left 150mm 4kW spindle diameter 40mm spindles adjustable up/down, right/left spindles lockable axes arranged alternately electric height adjustment 2 types of feed speed + stepless 5-13, 13-36m/min dust extraction nozzle diameter 2x120mm, 150mm dimensions length/width/height 3200x1500x1600mm + control panel weight 1980kg – manufactured in Portugal – electric table lifting – ideal for processing wet and dry wood – 3 planing shafts + 2 spindles – very good condition – used planer Net price: 38900 PLN Net price: 9260 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: ready for operation (used), Table diameter: 1000mm, tool height: 80mm, sealing pressure: 1.6t, number of stations: 4, connected load: 3kW, including tools, machine was hardly used. Kdedpfjif Elgex Aqqsr

Condition: used, CATALOGUE NUMBER 7650 Technical data: - max. working length 1500mm - max. working diameter 250mm - milling (disc milling cutter) 7.5kW - spindle – 2800 rpm, 3kW - spindle speed 700/1200/1500/2000 rpm - grinding unit 0.75kW Kdsdpfx Aqjztrfcjqer - hydraulic motor 3kW - total power 17.75kW - air consumption 6-8 bar - infeed conveyor for workpieces up to 150x150mm - diameter of dust extraction nozzle 100mm, 160mm - dimensions for transport (length/width/height) 4350x2300x1980mm - weight approximately 3000kg ADVANTAGES - made in Germany - automatic hydraulic copying system - original DTR documentation - unpainted - used lathe, very good condition Net price: 59900 PLN Net price: 14262 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (the price may change in case of significant exchange rate fluctuations)

Condition: new, Catalog number: O222 ADVANTAGES – grinding length 2600mm – electric table height adjustment – new machine – warranty – CE certificate TECHNICAL DATA table size 2600x800mm table lift 570mm pulley 250mm electric table height adjustment 0.37kW belt speed 18m/sec sanding belt size 120 x 150mm belt length 7050mm engine 3kW exhaust port diameter 120mm weight 400kg PRODUCT FEATURES The Optimat SD 260 long belt sander has been designed for processing smaller and medium-sized elements. The electrically controlled table certainly increases the precision and efficiency of work. Standard equipment: Electric table height adjustment Extraction nozzle Kodeztap Ajpfx Aqqodr User manual Automatic engine braking Protections compliant with standards Ergonomic emergency switch Electronic table stops Net price: PLN 21,000 Net price: EUR 5,000 Net price calculated according to the exchange rate of PLN 4.2/EUR (in case of larger exchange rate fluctuations, the price may change)

Condition: excellent (used), Year of construction: 2004, CATALOG NUMBER 7880 Technical data: - max cutting height: 150mm - max element width: 500mm - working width of shaft with saws: 400mm - shaft diameter: 70mm - max saw blade diameter: 450mm Kodpfx Aeztac Neqqodr - from above: - anti-kickback devices - 2 toothed feed rollers – pneumatically pressed - from below: - slip roller - anti-kickback devices - 2 toothed feed rollers - saw shaft - 2 toothed feed rollers - stepless feed speed adjustment via inverter - feed motor: 3kW - main motor: 55kW - overall dimensions L/W/H: 2120x1600x1630mm - weight approx. 2750kg ADVANTAGES – Polish-made – robust construction – Used machine, in very good condition Net price: 55,900 PLN Net price: 13,310 EUR at 4.20 EUR exchange rate (Prices may vary with greater exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7960 TECHNICAL DATA - Max cutting height: 140mm - Max workpiece width: 700mm - Working width of saw shaft: 580mm - Shaft diameter: 70mm - Max saw blade diameter: 400mm From above: - Kickback pawls/anti-kickback devices - 2 feed rollers, toothed - Metal slip roller From below: Kdodpfxsztacie Aqqsr - Slip roller - Kickback pawls - Smooth feed roller - Saw shaft - Smooth feed roller - Metal slip roller - Stepless feed speed adjustment via inverter - Feed motor: 3kW - Main motor: 22kW - Overall dimensions (L/W/H): 1600x1300x1900mm - Weight: approx. 2000kg Net price: 46,900 PLN Net price: 11,170 EUR (based on an exchange rate of 4.2 EUR) (Prices may change with significant rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 6946 Kedpfozr I Rljx Aqqedr TECHNICAL DATA - Max. working width: 210mm - Max. working thickness: 120mm - Number of spindles: 2 pcs - Spindle diameter: 50mm From above: - 3 infeed feed rollers, rubber, smooth, including 2 double rollers - 2 outfeed feed rollers, rubber, including 1 double roller - Cutterheads on supports - Cutterhead up/down adjustment - Electric adjustment of top cutterhead height - Electric setting of planing thickness - Spindles equipped with brake - Main motor: 2×5.5kW - Stepless feed speed adjustment - Feed motor: 3kW - Feed via Kardana shafts - Extraction nozzle diameter: 2x160mm - Dimensions (L/W/H): 2350x1780x1950mm - Weight: 1882kg – Made in Germany – Jointers for sharpening knives on the cutterhead – 2 Hydro cutterheads included – Not repainted – Very good condition, used planer Net price: 33,900 PLN Net price: 8,070 EUR Net price calculated at 4.2 PLN/EUR (price may change with significant exchange rate fluctuations)