Used Automatic Cake Cutter Solobaker for sale (25,683)

Condition: good (used), Horizon BQ-270V Perfect Binder Machine in very good condition. In addition, the machine is equipped with the DV-270 unloading module. Ready to work. Very low mileage. Manufacturer’s description: Fpedezyz Aqjpfx Aayjl Professional binder for perfect softcover. Fully automatic binder with an exceptionally stable type of construction, equipped with a hot glue gluing device, effective also for small and very small quantities of legs or sheets. The Horizon BQ-270V binder is a single-jaw machine with automatic cover feeding, which, operated by one person, delivers impeccably bound books in consistently high quality. Standardly equipped with a scanner measuring the thickness of the insert, it allows you to glue books using the „on demand” technology. Binds books with a thickness of 0.5 to 50 mm and a spine length of 135 to 320 mm with a maximum number of copies up to 500 books/hour. Factory-built cutter with additional cutting knives. Maximum milling depth up to 3 mm. Automatic cover feeding using a suction drum with a certain, constant setting relative to the bound sheets. A factory-built installation creating 4-fold creases on the cover, which is set automatically with precise adjustment. As an option, 6 creases can be installed for gluing books with bookmarks

Condition: used, Year of construction: 2016, Makino A51NX in very good condition includes a new ATC tool changer and Cubes. appr. 11000 hours cutting time Capacity & Travels: Pallet Size: 400 × 400 mm X-Axis Travel: 560 mm Y & Z-Axis Travel: 640 mm Max. Workpiece: ∅ 630 mm × 900 mm Max. Payload Capacity: 400 kg Spindle: Spindle Speed: 15,000 RPM Spindle Taper: HSK-A63th Motion & Feed Rates: Rapid Traverse Rate: 60,000 mm/min (1,968 ipm) Cutting Feedrate: 50,000 mm/min Axis Acceleration: 1G B-Axis Indexing: Full 4th axis, Direct Drive (0.001-degree increments) Tooling: ATC (Automatic Tool Changer) Capacity: 60 tools Tool-to-Tool Time: 0.9 seconds Max. Tool Diameter / Weight: 170 mm / 12 kg [[1]()] 04003 HSK-A63 Spindle In lieu of standard interface ISO50. Consists of double taper, full face contact, hollow shank interface. Tool clamping force higher than 44kN, HSK tool pots are required. 14017 HSK pots for 60 Tool ATC 26001 Moire Scale Feedback X,Y,Z-Axis Increments 0.05µm, positioning tolerance Tp = 0.006mm (ISO 230-2). 29006 Through Spindle Coolant 3.0MPa Provides TSC flow of 30l/min at 3.0MPa in lieu of standard 1.5MPa. Air through spindle possible. The pressure data refers to the output flange of the pump. 29009 Flow Switch for Through Spindle Coolant Checks for through spindle coolant flow. Will feed hold the machine if the flow is below a preset level. Note: recommended option on filtration systems to prevent tool damage. 31002 Air curtain for splash guard window Located in the middle of the operator side window, this air curtain in place to prohibits chips and coolant from obstructing view. 37000 Broken tool sensor outside machining area (BTS) Tool breakage detection for centric tools (tool diameter 1-40mm, tool length 65 - 430mm) over length measurement is using moveable probe. The measurement takes place in the ready position for a tool change outside the machining area. Accuracy ± 2mm. In case of differences between measurement before and after machining, alarm is triggered automatically. 37101L Autom. Workpiece Measuring device (RENISHAW OMP60) Three-coordinates-measure probe RENISHAW with automatical coordinate correction. The signal is transferred via infrared. Tolerance approx. 0.005mm. 14 automatic measure cycles as finished programmes are available in the program memory. Note: requires 13m Control Options 60001 Automatic Corner Override (G62) Automatically decelerating the cutter at a corner depending on the corner angle to maintain cutting quantity per unit time. Fedpfxozg N E Ho Aayjpl 62007 Run hour and parts quantity display Run hour and parts quantity display 63034 DATA CENTER Storage Type B (total: 800MB) Communication card with internal 800MB removable flash RAM card used for storing and executing NC data (of subprograms) for high speed, high definition finishing and supporting SGI capabilities. CNC programs can be transferred to and from a CAD/CAM system from the operator's pendant by FTPs get and put commands over an Ethernet cable. 66003 Additional 48 Work Offsets (G54.1 P1-P48) Allows for 48 work coordinate systems simplifying multiple part fixtures. 68010 600 Macro Common Variables Variable #: 100-199 cancelled at power off and reset, 500-999 are permanent.

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, travel distance X-axis: 140 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 300 mm, workpiece length (max.): 400 mm, The design of the base machine is characterized by the following features: - Horizontal arrangement of the workpiece spindle; vertical arrangement of the milling spindle or milling head - The workpiece is mounted between the workpiece spindle stock (left) and the tailstock (right) - The radial slide is mounted on the base (X-axis) - The axial slide moves on the radial slide (Z-axis) - The swivel milling head is equipped with an automatic angle adjustment (A-axis); the swivel slide (Y-axis) moves tangentially to the workpiece diameter TECHNICAL DETAILS Travel range X-axis: 140 mm Travel range Y-axis: 100 mm Travel range Z-axis: 300 mm Tailstock travel W-axis: 420 mm Swivel angle of the end mill head A-axis (left): 50° Swivel angle of the end mill head A-axis (right): 60° Fodpfozwmyiex Aayspl Largest millable module with hob cutters according to DIN 8002: 4.5 mm Largest millable module for high-performance milling: 3.0 mm Number of teeth: 2–999 Workpiece diameter with manual loading: max. 200 mm Workpiece diameter with automatic loading: max. 150 mm Workpiece length: max. 400 mm Milling spindle speed range B-axis: 0–1,500 rpm Workpiece speed C-axis: 0–350 rpm Milling tool data Milling tool diameter: 40–102 mm Milling tool length: max. 230 mm Radial front diameter (standard): 16–32 mm Milling coordinates Z-axis: 100–400 mm X-axis: 130–150 mm Y-axis (end face of the milling spindle): 50–230 mm W-axis (end face of the tailstock spindle): 165–585 mm Feed rate X-axis: 3,500 mm/min Feed rate Z-axis: 3,500 mm/min Feed rate Y-axis: 4,000 mm/min Feed rate W-axis: 5,500 mm/min Feed rate V-axis (portal loader): 80,000 mm/min EQUIPMENT IBH control system Loading device Extensive range of accessories

Condition: used, Year of construction: 1999, Year: 1999 Fpedpfx Ajy Rqd Usayel Condition: functional Technical specification: - Maximum sheet format: 1120 × 780 mm - Minimum sheet format: 400 × 400 mm - Layer height: 40 to 165 mm - Maximum stack height: 1300 mm - Load capacity: 200 kg - Operating air pressure: 6–8 bar - Electrical power consumption: 1.2 kVA POLAR Mohr Transomat TR 130 EL-4 The POLAR Mohr Transomat TR 130 EL-4 is an automatic unloading and stacking device designed for operation with high-speed paper cutting machines manufactured by POLAR Mohr. The unit automatically removes cut paper layers from the unloading table of the cutter and places them onto a pallet. This reduces manual handling, shortens auxiliary operating time, and improves the continuity and productivity of the cutting process. Operating principle After completion of the cutting cycle, the cut layer is transferred into the working area of the unit. The handling mechanism grips the layer, transports it, and places it accurately onto the pallet. The system includes a movable pallet tip which helps maintain precise alignment of the stack.

Year of construction: 2026, condition: new, functionality: fully functional, New vertical pressure leaf filter body Manufacturer: Juneng Model: NYB-20 Filter Area: 20 m² Cake Volume: approx. 400 L Capacity: approx. 4–6 t/h for crude / vegetable oil Working Pressure: 0.1–0.4 MPa, max. 0.5 MPa Shell Temperature: ≤150 °C Machine Volume: approx. 1,680 L Weight: approx. 1,700 kg Shell Diameter: approx. 1,100 mm Plate Spacing: 70 mm Inlet / Outlet: DN50 inlet/outlet, DN40 overflow, approx. DN400 discharge Material: carbon steel as standard Stainless steel version available on request at additional cost Important note: This offer is for the filter body only. PLC automation, automatic valve skid and installation are not included. Fodpfxozggc Ns Aayspl Key Features: Hermetic sealed vertical structure – no leakage or odor High filtration precision – suitable for crude oil clarification and fine filtration Low maintenance – long service life of filter plates Simple cake discharge – vibration / discharge system depending on configuration Can be steam jacketed – optional heating for waxy oils Filter aid compatible – suitable for bleaching earth, activated carbon or diatomaceous earth Compact vertical design – high filtration area with limited floor space Typical Applications: Crude vegetable oil clarification after settling Bleaching earth filtration after bleaching tank Post-degumming or post-neutralization polishing Filtration of rapeseed oil, sunflower oil, soybean oil and other vegetable oils Technical oil, biodiesel and oleochemical filtration Food, biodiesel and cosmetic-grade oil prefiltration Suitable for oil mills, edible oil processing plants, biodiesel producers, oleochemical plants and industrial liquid-solid separation applications. Neuer vertikaler Druckblattfilter / Pressure Leaf Filter Hersteller: Juneng Modell: NYB-20 Filterfläche: 20 m² Filterkuchenvolumen: ca. 400 L Kapazität: ca. 4–6 t/h für Rohöl / Pflanzenöl Arbeitsdruck: 0,1–0,4 MPa, max. 0,5 MPa Arbeitstemperatur: ≤150 °C Behältervolumen: ca. 1.680 L Gewicht: ca. 1.700 kg Behälterdurchmesser: ca. 1.100 mm Plattenabstand: 70 mm Ein-/Auslauf: DN50 Ein-/Auslauf, DN40 Überlauf, ca. DN400 Austrag Material: Standardausführung in Kohlenstoffstahl Edelstahl-Ausführung gegen Aufpreis auf Anfrage erhältlich Wichtiger Hinweis: Angeboten wird nur der Filterkörper. PLC-Automatisierung, automatischer Ventilstand und Installation sind nicht im Lieferumfang enthalten. Hauptmerkmale: Hermetisch geschlossene vertikale Bauweise – kein Auslaufen und geringe Geruchsemission Hohe Filtrationsgenauigkeit – geeignet für Rohölklärung und Feinfiltration Geringer Wartungsaufwand – lange Lebensdauer der Filterplatten Einfache Kuchenentleerung – Vibrations-/Austragssystem je nach Ausführung Optional beheizbar / dampfbeheizbar – geeignet für wachshaltige Öle Kompatibel mit Filterhilfsmitteln – geeignet für Bleicherde, Aktivkohle oder Kieselgur Kompakte vertikale Bauweise – große Filterfläche bei geringem Platzbedarf Typische Anwendungen: Klärung von rohem Pflanzenöl nach der Sedimentation Bleicherdefiltration nach dem Bleicher Polierfiltration nach Entschleimung oder Neutralisation Filtration von Rapsöl, Sonnenblumenöl, Sojaöl und anderen Pflanzenölen Technische Öle, Biodiesel und oleochemische Anwendungen Vorfiltration für Lebensmittel-, Biodiesel- und kosmetische Ölqualität Geeignet für Ölmühlen, Speiseölverarbeitung, Biodieselhersteller, oleochemische Anlagen und industrielle Fest-Flüssig-Trennung.

Condition: used, Year of construction: 2004, functionality: fully functional, type of input current: three-phase, total width: 1,800 mm, total length: 16,500 mm, input voltage: 400 V, input current: 10 A, 21 C – GERBER Spreader SY 101 Fabric Spreading System – Complete Cutting Room Line Description For sale is a GERBER Spreader SY 101 industrial fabric spreading system, including the spreading unit and full table infrastructure. This system is designed for efficient and precise spreading of fabric layers across long cutting tables in high-volume garment production. It ensures consistent material handling, accurate layer control, and significantly improves cutting room productivity. The system has been operated as part of a complete production line together with a Gerber automatic fabric loader (unit 31 C) and a Lectra VT-FA-MH-71 CNC cutting system (unit 29 C). This setup enables a continuous workflow from roll loading to spreading and cutting, reducing manual labor and increasing overall throughput. The machine was used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video recorded in operation on 05.03.2026. Includes • GERBER Spreader SY 101 • Rail-mounted motorized drive system • Integrated control panel • Full-length spreading tables (approx. 16.5 m) • Fabric roll holder system • Conveyor-based / air flotation table structure • Integration capability with loader and cutter systems Technical Specifications • Manufacturer: Gerber Technology • Model: SY 101 • Type: Fabric spreading system • Application: Cutting room / spreading line Capacity • Max roll width: approx. 1800 mm • Max roll weight: approx. 100 kg • Max roll diameter: approx. 500 mm • Max lay height: approx. 230 mm Performance • Max spreading speed: up to 100 m/min • Length accuracy: ±2 mm Electrical • Voltage: 230 V / 400 V, 50/60 Hz • Power: approx. 2.5 kW • Compressed air: approx. 6 bar System Features Fpjdpsy Avqdsfx Aayjl • Air flotation table for low-friction material handling • Tension-free fabric feeding system • Precise length control for minimal material waste • Compatible with automated loaders and CNC cutting systems Advantages • High-precision spreading reduces material waste • Continuous production flow • Reduced manual handling • Suitable for denim, workwear, and technical textiles • Modular system adaptable to different layouts Condition Used industrial condition Operational prior to shutdown Typical signs of industrial use Inspection possible prior to dismantling Sold as-is, where-is, without warranty Location Valga, Estonia Removal & Transport Buyer responsible for dismantling and transport Professional dismantling recommended

Condition: used, Year of construction: 2018, Used machine Used edge banding machine from Holz-Her, model Sprint 1329 Performance, with Return system from Barbaric, type RTS 01 Edge banding machine: Year of manufacture: 2018 Motorized roller bridge 1329 PERFORMANCE iTronic - Adaptive pressure and glue quantity control, automatic fine adjustment depending on the program Infeed fence, standard B20 mm Infeed fence for precise feeding of the workpiece Edge Control 19 control system with 18.5" touchscreen color display 16:9 Jointing cutter unit 1802 (2 x 2.0 kW, 200 Hz, 12000 min-1) with 2 cutter units for jointing the edge of the panel (1x forward rotation, 1 x reverse rotation) Edge feeder 1901 SYNCHRO, automatic transport of coil and strip material Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) Pressure unit 1913, motorized, 1 roller driven, 2 follower rollers Spray device (release agent) after the pressure unit with 2 spray nozzles for coverage up to 60mm working height Trimming unit 1918 (60 mm), pneumatic (2 x 0.45 kW, 12000 min-1), pneumatically swiveling 0/10° Fsdpfx Aaezt Twtsyepl Cutter unit FR701, 100% repeat accuracy at the push of a button thanks to play-free mechanics Shaping cutter unit FF701, 100% repeat accuracy at the push of a button thanks to play-free mechanics Scraping unit 1929 MOT4 incl. high-gloss package with motorized adjustment of the feeler rollers Surface scraping blade FK701 with pre- and post-sensing for removing glue residue Motorized adjustment of the infeed fence for precise feeding of the workpiece to the jointing cutter unit Automatic chain lubrication / intelligent automatic transport chain lubrication GLU JET collection container Spray device 1856 for the infeed and outfeed area: Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 min-1) For final polishing and edge polishing. With 2 textile discs, swivel range 0 - 5° RETURN system connection (emergency stop interlocking) Connection of a workpiece return system to the control system from HOLZ-HER Machine dimensions approx. 5600 x 1010 x 1900 mm Machine weight approx. 2100 kg Return system: Year of manufacture: 2018 Machine number: 2180122-206 Further details can be found in the PDF Availability: by arrangement Location: Röllbach

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: L23001388, overall weight: 208 kg, tank capacity: 14 l, type of cooling: water, input voltage: 380 V, Semi-industrial machine designed for mixing dough and extruding pasta from any type of pasta flour and semolina. The machine is dedicated to producing short pasta, long pasta, and dough strips. Suitable for medium-scale pasta production as well as feeding dough strips to cutters or nest-shaping machines. All parts in contact with dough, as well as the entire structure, are made of stainless steel. The mixers and screw are easily removable for cleaning. Equipped with an automatic cutter with a full set of knives. Additionally, I am offering a new set for penne pasta production for sale (2200 euro). Fsdew Av Snepfx Aayepl

Year of construction: 2014, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1400040685, Special Features: Retrofit to WIN10 – NEW – with 6 months warranty on computer and UPS Water-cooled spindle, 9.5 kW S1 3-layer machining possible Carefully cleaned and overhauled – excellent condition Description: Graphical operator guidance and graphical service support A-axis for stepless machining from above – swivel angle 180° HSC milling spindle for speeds up to 24,000 rpm Large machining width Standard with clamping detection and automatic clamp positioning 8 tool stations Complete profile machining with stationary profile bar Rapid basic positioning of the machining unit (up to 64 m/min) on the X axis Robust, low-wear direct drive Protective hood Digital axis controllers for all 4 axes with high-resolution measuring system 4-axis industrial PC control 2 1/2 D interpolation 15" TFT color screen Network connection RJ45 10/100 MBit Hard disk Full PC keyboard Remote maintenance via TCP/IP (requirement: internet access) Technical Specifications: Max. machining length without frontal machining: 7,600 mm Max. machining length with frontal machining: 7,500 mm (tool-dependent) Travel X-axis: 7,700 mm Travel speed X-axis: 65 m/min Travel Y-axis: 850 mm Travel speed Y-axis: 60 m/min Travel Z-axis: 650 mm Travel speed Z-axis: 60 m/min Swivel angle A-axis, freely programmable in 0.1° increments: 0 - 180° Positioning accuracy: X-axis: +/- 0.1 mm / 1 m Y-axis: +/- 0.1 mm Z-axis: +/- 0.1 mm A-axis: +/- 0.1° Max. spindle speed: 24,000 rpm Max. spindle power: 9.5 kW S1 Tool holder: HSK F 63 Max. cutter diameter: 80 mm Max. milling cutter diameter: 200 mm Compressed air connection: > 7 bar Voltage: 400 V, 3 PH, 50 Hz Fuse: 35 A 8 tool stations Included Accessories: Tool setting gauge 8 pneumatic material clamps Automatic clamp detection Dosing spray device Protective hood Front light barrier Side safety fences (left and right) Central chip extraction 2 pneumatic material stops 3-circuit clamping system Length measurement for profile bar Barcode scanner with wireless transmission Special version with light barrier Additional options available on request: Fpedpoy Ah Tkjfx Aaysl Programming software (office) eluCad, incl. hotline contract for 6 months 3D import license for one machine of category "L" Data import license package for one machine of category "L" CSV import license for one machine of category "L" Macro hashing license for one machine of category "L" Other information: The machine is delivered ready for transport, including transport locks, loaded onto truck Additionally, we optionally offer the following services on request: Installation and commissioning Machine training 4/5-axis training package for machine and eluCad

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, STERLING SRA DGSA Horizontal Semi-Automatic Year- 2019. Capacities 90° 45° L & R 60° L & R Round mm 440 410 330 Square mm 440 410 310 Rectangle mm 610 x 440 460 x 270 330 x 170 Bed Height mm 860 Blade Size mm 5200 x 34 x 1.1 Cutting Speed m/min 20 - 100 Motor Kw 3 Length mm 2800 Width mm 1860 Height mm 1870 Weight Kgs 1540 Operation Semi-Automatic Vice Hydraulic Mitres 60 degrees both ways. Fedpfjzy Sqxox Aayjpl Sliding vice from left to right. Hydraulic cutting with variable pressure and variable speed Hydraulic vice. Hydraulic bow lock at any angle. Hydraulically controlled counterbalance to prevent bow descent speed increasing during the cutting cycle. Carbide blade guides for high accuracy. Blade tension indicator. Infeed and outfeed roller sections. Machine comes with the following roller sections: 2 x 2000mm 1 x 1600mm 4 x 1000mm.

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Equipment and technical data: - machine has been completely overhauled: - new Glue Jet 301 glue system (top part 1 mm) - all units inspected - all cutters sharpened - all knives replaced - feed speed: 10 - 18 m/min - workpiece length: min. 160 mm - workpiece width: min. 60 mm - workpiece thickness: 8 - 60 mm - edge thickness: 0.4 - 8 mm - electrics for infinitely variable feed: 400 V / 50 Hz, 2.2 kW - motorised pressure beam adjustment - automatic chain lubrication - PPC 315 control with 15" touchscreen - ECO MODE energy-saving mode Fpsdpfxjzlbpzo Aaysl - infeed fence 1350 mm, motor-adjustable - jointing/trimming unit 1802: - 2 x 2.0 kW, 200 Hz, 12000 rpm with 2 milling units for jointing the panel edge - cutter, diamond Ø 70 x 64 x 30 mm, Z2, counter-clockwise for jointing unit - cutter, diamond Ø 70 x 64 x 30 mm, Z2, clockwise for jointing unit - edge feed 1901 fully automatic - adhesive application station Glu Jet GJ301 automatic: - 2.3 kW; 50 Hz - storage hopper for granulate - pressure unit 1913 MOT - end-trimming unit 1918 (60 mm) pneumatic - multifunction milling unit 1826 MOT4 (2 x 0.65 kW): - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm counter-clockwise - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm clockwise - profile milling unit 1833 MOT4: - cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, counter-clockwise with CM technology - cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, clockwise with CM technology - scraper unit 1929 MOT2: - carbide indexable inserts for scraper holder R = 2.5 mm (2 pcs. required) - flat scraper 1964 - buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Availability: at short notice Location: 63934 Röllbach

Year of construction: 2026, operating hours: 1 h, condition: new, functionality: fully functional, overall weight: 560 kg, total length: 1,870 mm, total width: 1,040 mm, total height: 1,550 mm, compressed air connection: 6 bar, positioning accuracy: 0.01 mm, repeat accuracy: 0.01 mm, rotational speed (max.): 60,000 rpm, type of input current: three-phase, Semi-automatic depaneling / basic machine with parallel shuttle The dynamic depaneling machine LOW 4322 is especially suited for medium to high product volumes and meets growing demands in the production process. Printed circuit board blanks of various materials are separated using low-dust and low-stress sawing and milling techniques with maximum product flexibility, precision and throughput. Highly dynamic linear motor axes, tools and grippers meet the highest quality standards and guarantee the depaneling machine a long service life and high reliability. Made in Germany Semiautomatic depaneling - solutions on demand The LOW 4322 depanelling system enables fast product changeover while maintaining short depanelling and handling times. The insertion of the blank PCB is done with a parallel shuttle, pick-up and fixation with pin clamping technology and if necessary in combination with vacuum suction cups. This machine is equipped with: • a shank and disc tool separating module on Z-axis (automatically rotatable 0-90) • X-Y cross stitch module in linear motor technology with high resolution measuring system • 2-compartment loading module built as parallel shuttle, separated left and right with sliding doors • Alu profil frame with two maintenance doors - left and right. • Standard vision system base module for teach-in programming (camera area 400 x 330 mm) • Working area is 420 x 330 mm • Automatic cutter length processing (only in combination with shank separation module) Fpedpfsznr Sljx Aayjl • Remote maintenance/support via remote connection (TeamViewer) or provided by the customer • Touch IPC with Windows operating system • Laser axis measurement incl. protocol • air ionization • Cutter breakage control for end mills only • Preparation for vacuum clamping technology • ESD window and sliding doors Optionally a vacuum cleaner unit can be offered later.

Year of construction: 2001, condition: used, Fully automatic infeed system for dovetail cutter Table width max. 620 mm Spindle feeder Automatic length sorting, 3 lengths Package forming, 3 x Buffer Package turner Package destacking Manual infeed Buffer before the zinc coating system with 6 compartments Specification: Wood input length: min. 150 mm max. 600 mm Wood cross-section: min. 20 x 40 mm max. 80 x 180 mm Performance: 6 milling tables/min Working height: 960 mm Fsdpsh Icimefx Aayspl Table width: 620 mm System width: System length: See pictures System is immediately available, already dismantled.

Condition: excellent (used), CATALOG NO. 7227 TECHNICAL DATA - Working width: 40 – 300 mm - Material thickness: 10 – 35 mm - Min. material length: 270 mm - Max. material length: unlimited - Max. feed speed: 90 m/min - Feed speed steplessly adjustable via inverter from control panel - Cutting speed: 24 m/min - Milling motor power: 2x 4 kW - Milling spindle speed: 7,500 rpm - Feed motor power: 0.75 kW - Pneumatic top and side pressure - Spindle diameter: 40 mm - Motor-driven infeed roller conveyor, length 1,130 mm - Manual / automatic operation - PLC controller with touchscreen for easy operation - Compressed air connection: 8 bar - Extraction outlet diameter: 150 mm - Dimensions (L/W/H): 2,550 x 1,200 x 1,400 mm - Weight: 1,100 kg ADVANTAGES – German manufacturing – Operating and maintenance documentation (DTR) – Machine for tongue and groove profiling Fpodpfx Aszrvccsayjl – Set includes complete cutter and head set – Motor-driven infeed roller conveyor – Unpainted – Used machine, in very good condition Net price: 107,900 PLN Net price: 25,690 EUR (according to exchange rate 4.2 EUR/PLN) (Prices may vary depending on currency fluctuations)

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Edge Control control system with 18.5" touchscreen color monitor 16:9 Swiveling operator panel, Program storage, Motorized pressure bar adjustment, Feed via transport chain, Feed speed: 8-18 m/min Extendable workpiece support, Infeed fence with motorized adjustment Jointing unit 1961, Diamond jointing cutter for climb and counter rotation, Automatic adjustment to workpiece height Edge feed 1903 Pre-trimming up to 3 x 45 mm (depending on material) Glue application system 1905 Multi-System Automatic glue height adjustment with sensor nozzle, Pressure regulator for adjusting the cartridge contact pressure, Use of PUR adhesives possible, Pressure unit 1913 MOT, First roller driven End trimming unit 1918 with pneumatic adjustment End trim saw pneumatically swiveling, Multifunction unit 1824 MOT 4 with multifunction cutter radii 1,2,3 mm Corner copying unit 1832 Corner copying up to 3 mm edge thickness Radius scraper 1929 MOT 2 With motorized adjustment of horizontal tracing rollers With pneumatic adjustment (top and bottom separate) Chip collection box for radius scraper, Surfacing scraper 1964 For removing glue residue for a clean glue line With extraction hoods Spray unit 1856 for infeed and outfeed area Buffing unit 1940 For finishing and edge polishing Fpodpfxjv Sv Ene Aayol ----- Technical Data ----- Edge thickness roll material: 3 mm, Edge thickness strip material: 8 mm, Max edge thickness for corner copying: 3 mm, Workpiece thickness: 45 mm, Workpiece thickness for corner copying: 45 mm, Min. workpiece length: 180 mm, Feed speed: 8-18 m/min, Distance workpiece support: 470 mm, Support table diameter for edge material: 800 mm, End cut knife for coiled material up to: 3 mm, Heating time: 3.5 min, Jointing unit power: 2 x 2 kW, End trim saw power: 2 x 0.22 kW, Milling station power: 2 x 0.35 kW, Corner copying power: 0.22 kW, Extraction port jointing unit: 120 mm, Extraction port milling unit: 70 mm, Extraction port scraper unit: 70 mm, Total length: 5,350 mm, Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Picture of operating hours taken from a recording in 2022 Availability: short term Location: Röllbach

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1877, cutting height (max.): 300 mm, total length: 18,500 mm, total height: 2,550 mm, cutting width (max.): 450 mm, total width: 2,400 mm, control cabinet width: 400 mm, saw blade diameter: 735 mm, overall weight: 11,000 kg, control cabinet length: 1,600 mm, control cabinet height: 2,400 mm, power: 15 kW (20.39 HP), type of input current: three-phase, Equipment: safety light barrier, Equipment: 01_ Cross-sections 20 x 60 to 300 x 450 mm 02_ Feed conveyor, transverse, 5 strands, 2.2 m 03_ Undercutting miter saw 04_ Universal milling machine ----> Roller cutter ----> Finger cutter 05_ Combination support for vertically operating tools ----> 1x Drilling machine ----> 1x Finger milling machine 06_ Combination support for horizontally operating tools ----> 2x Drilling machine ----> 1x Grooving machine 07_ Beam turning station, fully automatic Machine installation: 08_ Substrate, foundation: ----> The floor slab must have a thickness of at least 10 cm (with corresponding good reinforcement) This should be level and suitable for anchoring. 09_ Power requirements, type, quality, quantity: 09.1_ Electrical: ----> Voltage: 400/230V, 3/N/PE ----> Fuse rating: 3 x 63A Fpjdpfxezv Tt Hs Aayjl ----> Frequency: 50 Hz ----> Peak demand: 15 kW The mains voltage must be constant and uninterrupted within the specified tolerance range! 09.2_ Compressed air: ----> Flow rate: V < 600 l/min ----> Pressure: Operating pressure p = 8.5 bar; Maximum permissible pressure p = 10 bar Important: The control system was converted by Hundegger from MIPPS to CAN control in the fall of 2020!!

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, cutting width (max.): 450 mm, working length: 16,000 mm, working width: 450 mm, Equipment: safety light barrier, A well-maintained Hundegger K2 cutting machine with a planer is offered for sale. The machine is fully functional and has been serviced several times a year by Hundegger. The machine is still in operation until the beginning of November and can then be dismantled by the buyer. =Equipment: = Machine type K2-5-450 - Wood length, feed and discharge max. 16m - Color RAL 5012 blue - Feed cross conveyor, 6 strands, horizontal, 2.2 m with flat belt chains - Extendable wood discharge - Undercarriage swivel miter saw - Universal milling cutter, 5-axis UFS (roller cutter, finger cutter, dovetail cutter) - Combination support for vertically operating tools (finger cutter, drilling unit 2.2kW) - Combination support for horizontally operating tools (drilling unit 2.2kW, drilling unit 2.2kW) - Marking device at the front - Discharge table, 6-arm - Beam turning station, hydraulic - Enhanced wood support surfaces (the vulnerable plastic coating has been replaced with maintenance-free stainless steel, chrome-plated tables, stainless steel rollers) - Extension roller conveyor, 10m with feed roller - Transfer cross conveyor, 7 strands, 3.5m with flat belt chain - Connection to planer HMD = Planer HMD - Fully automatic 4-sided planing and chamfering - Planer motors 7kW - Automatic thickness planer adjustment - Direct planer control - Planer machine directly integrated after the cutting machine Fedjzb I Iwspfx Aayepl = Other - Inspection possible by appointment. - If the machine is being dismantled, it can of course also be inspected in the operating environment. - A new K2 with a planer and comparable equipment costs approximately 800,000 euros. - New spare parts in stock can be included at a favorable price. - The machine runs perfectly, however, no guarantee or liability is assumed for future damages. - Ideal machine for medium to large carpentry or sawmill operations. = Contact - Friedrich Hirsch GmbH - Schwaig 2, 3351 Weistrach, Lower Austria - Managing Director and Owner: Friedrich Hirsch - If you have any questions, please call us from Monday to Friday from 7:00 a.m. to 12:00 p.m. and from 1:00 p.m. to 5:00 p.m. or send an email at any time. - Unfortunately, I cannot provide a mobile phone number, as the advertisement would otherwise be blocked.

Condition: used, Year of construction: 2020, machine/vehicle number: 931/20 TS90, functionality: fully functional, operating hours: 50 h, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 90 mm, cutting width (max.): 4,300 mm, overall weight: 3,500 kg, Equipment: CE marking, documentation/manual, saw blade guard, scorer, We offer this used Macmazza TS90 Beam Saw, year of construction 2020. Manufacturer: Macmazza Model: TS90 Year of construction: 2020 Condition: used Category ID: 1426 Type ID: 844 Type: Beam Saw 2020 MACMAZZA TS90 4300 × 4300 CNC BEAM SAW – ONLY 28 HOURS OF ACTUAL WORKING TIME Price: €64,000 net – negotiable An exceptional opportunity to purchase a 2020 Macmazza TS90 automatic horizontal CNC beam saw with extremely low operating hours. The machine was originally supplied in the United Kingdom as an ex-demonstration machine and has subsequently seen very limited use in our bespoke joinery workshop. It is in excellent condition, fully operational and currently installed. RECORDED OPERATING DATA • Total Hours Machine in Operation: 49 hours 46 minutes • Total Hours Machine in Working: 28 hours 31 minutes • Total Saw Blade Cutting Distance: 571.5 metres • Total Production Recorded: 129.6 m³ All operating data can be verified directly through the machine’s control system. TECHNICAL SPECIFICATION • Manufacturer: Macmazza • Model: TS90 • Year of manufacture: 2020 • Serial number: 931/20 • Cutting length: 4,300 mm • Pusher stroke: 4,300 mm • Maximum cutting height: 90 mm • Installed power: 15 kW • Power supply: 400 V, 50 Hz, three-phase + N + PE • Control voltage: 24 V DC • Full-load current: 30 A • Machine weight: 3,500 kg • Computer-controlled operation Fodpfezzdyzsx Aayopl • Integrated cutting optimisation software • Automatic rear pusher • Pneumatic grippers • Scoring unit • Air-float front supporting tables • CE marked ADDITIONAL ORIGINAL MACMAZZA GRIPPER The machine has been upgraded with an additional genuine Macmazza pneumatic gripper, supplied and professionally installed through R&J Machinery. The additional gripper and professional installation cost £2,685.90 + VAT. Supporting invoice available. CONDITION AND INSPECTION The machine is in excellent condition and has completed only 28 hours and 31 minutes of actual working time. It is currently installed and can be inspected and demonstrated under power by prior appointment. Further photographs, videos, operating-hour records, original documentation and invoices are available upon request for serious enquiries. LOCATION AND COLLECTION Located in Perivale, West London, United Kingdom. Sale terms: EXW – Ex Works. Dismantling, loading, transport and recommissioning are the responsibility of the purchaser. PRICE €64,000 net – negotiable Serious enquiries only. Please contact us to arrange an inspection or request further you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 1983, Working width: 510 mm Planing cutterhead: Spiral cutter Number of cutters: 2 Feed table length: 2800 mm Feed table adjustment: hydraulic / foot pedal Adjustment for rabbet and chamfer joints: yes Chip removal display: scale Fpedezq Dcbopfx Aayol Rabbet and chamfer joint display: scale Adjustable angle of the fence: yes Motor power: 5.5 kW Motor brake: yes, automatic Machine length: 2800 mm Machine width: 1000 mm Weight: 1050 kg

Condition: like new (used), Year of construction: 2026, functionality: fully functional, Kilia 325 Liter Cutter 5000 Express – Factory overhauled 2025 Powerful high-performance cutter system with extensive general overhaul – ready for continuous use in professional food processing Fpjdjyk Tuuepfx Aayel Top Features & Highlights: Overhauled in 2025 – numerous main components newly installed: Vacuum pump Base plate Main motor & plate motor Knife shaft incl. bearing Electronic control incl. new control cabinet (stainless steel) Frequency converter Hydraulic cylinder & unit Ejector motor & bearing Feeder motor & bearing Electronic control panel with 10-inch touch panel & joysticks All scrapers Technical equipment: Robust stainless steel design (machine & bowl) High-performance knife shaft drive, infinitely variable from 50–4000 rpm, with reverse (50–500 rpm) Knife shaft drive power: 81 kW, bowl: 3 kW (400 V, 50 Hz) Hydraulically operated noise protection cover (double-walled, stainless steel) Fully automatic ejector (hydraulic) Maintenance-free knife shaft system Automatic central lubrication (ADS 100) Knife shaft brake (electric) 6-knife set Knecht K24 Thermometer & tachometer with end shut-off (electronic) Hydraulic knife tension nut Loading system for 200-liter trolleys (hydraulic) Vacuum function for highest product quality Integrated maintenance and inspection module Remote diagnosis via encrypted internet connection (broadband required) Separate stainless steel control cabinet (wall-mountable) Manual or automatic water addition

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 02-84-022, power: 37 kW (50.31 HP), 4-SIDE PLANER/MOULDER, 4 CUTTERHEADS + UNIVERSAL SPINDLE, 2.5M TABLE & HEAVY-DUTY MOTORS Brand: CASADEI Model: MATRIX 4+1 Serial No.: 02-84-022 Year: 2002 WORKING CAPACITY (thickness x width): 6 to 155 x 25 to 230 mm - 4-sided planer and moulder - Working width: 25 to 230 mm - Working height (timber thickness): 6 to 155 mm - Max. finished timber section: 155 x 230 mm - Min. working length: 480 mm - Adjustable cutting depth: max 10 mm - Spindle rotation speed: 6,000 rpm PLANER/MOULDER CONFIGURATION: - Sturdy welded steel frame - Soundproof panoramic hood with gas struts - Raised operator control panel - 2,500 x 250 mm steel infeed table Floor height: 880 mm Side-entry spring-loaded feed roller Manual table lubrication unit after surfacing 1) Bottom horizontal spindle 5.5 kW Fpedpou Sr Ivefx Aayol TERSA cutterhead Ø125 x h.240 mm 1 retractable vertical roller presser 2 & 3) Right then left vertical spindles, 1 x 7.5 kW each TERSA cutterheads Ø125 x h.165 mm 4) Top horizontal spindle 7.5 kW TERSA cutterhead Ø125 x h.240 mm Adjustable exit pressure pad 5) Universal spindle 7.5 kW Ø 40 x 255 mm 1 retractable horizontal roller presser FEED SYSTEM: - Variable feed speed: 5 to 25 m/min Feed motor: 1.1 kW (1.5 HP) - 8 independent pneumatic feed rollers: 2+2 grooved steel, then 2+2 rubber-coated OTHER SPECIFICATIONS: - CE marking - Power supply: 380V, 3-phase, 50 Hz - Lockable main switch, automatic star-delta starters Emergency stops front/rear - Installed power: 37 kW (50 HP), IN 62A - Braked motors - Cardan shaft spindle drives - Digital readouts (Siko-type counters) for precise manual adjustment of each operation - Electric raise/lower beam for thickness adjustment, Raise/lower motor: 0.37 kW - Axial spindle adjustment: Bottom horizontal: 0 to 15 mm Top horizontal: 0 to 25 mm Verticals: 0 to 25 mm - Acceptable cutter/tool dimensions: On bottom horizontal spindle: Ø 120 to 140 mm Profiling on vertical spindles: Ø 100 to 180 mm Profiling on top horizontal spindle: Ø 100 to 180 mm End milling cutter: Ø140 x 12 x 40 mm - Recommended pneumatic supply: 7 bar Working pressure: 6 bar Average consumption: 0.85 Nl/cycle Connector: 1/2" G - Dust extraction, central upper port: Ø250 mm Required air speed: min. 25 m/sec Airflow: 4,500 m³/h - Technical manual included. - Machine fitted with 4 TERSA shafts Footprint: 4,700 x 1,700 x h.1,800 mm Weight: 2,240 kg Please contact us for supply of consumables, accessories, and/or extraction systems.

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, The all-rounder combines outstanding build quality with a wide range of applications. Our machine also offers intuitive operation to optimize your packaging processes. A high-quality material unwinder with dual automatic roll centering ensures precise material guidance. Furthermore, our active material advance unit guarantees optimal web tension for flawless packaging results. The highly powerful brushless motors and user-friendly color touchscreen control system give you maximum flexibility during format changes and greatly simplify your packaging operations. The machine features memory slots for storing machine parameters—up to 50 different products can be saved. For this packaging line, we also offer fully and semi-automatic infeed systems, which can be retrofitted at your request. The machine is available in both directions of operation and features rotary cross-sealing with an electronic overload protection switch for maximum safety. Thanks to its powerful performance, versatility, and technological sophistication, our machine is ideally suited for packaging food items such as brioches, cakes, candies, pralines, chocolate, as well as pharmaceutical products and various gift articles. Fpjdjwld Tfspfx Aayol If you wish to optimize your packaging processes with strong production performance and high quality, Impuls Packaging is your ideal partner. System features: 1. Chain conveyor belt, 2.6 meters in length (other lengths available on request) 2. Adjustable bag former 3. Single film loader + automatic film centering device 4. Rotary end seal, single sealing jaw 5. Robust, central fin seal structure 6. Four servo-driven systems: - Active material advance shaft - Center sealing - End sealing - Conveyor belt 7. HMI control panel 8. Three individual temperature controllers 9. 304 stainless steel housing 10. Documentation in the local language 11. Register mark control 12. Bag length programmable or with fully automatic product length detection 13. Standard operation from left to right Technical specifications: 1. Product length: L40–600 mm 2. Product width: W30-200 mm 3. Product height: H10–80 mm 4. Packaging speed: up to 80 products/min 5. Maximum film width: 600 mm 6. Power supply: 1Ph. 220V 50Hz 7. Total power: approx. 4.7 kW 8. Machine weight: approx. 550 kg 9. Machine dimensions: approx. 4300 x 1190 x 1210 mm

Condition: ready for operation (used), Year of construction: 2000, Casadei Matrix A (identical machine to SCM Compact O, R, L, U model) - 2-axis control for aggregate positioning - Four-sided planer and moulding machine - Working width: 25 to 230 mm - Working height (wood thickness): 6 to 155 mm - Max. final cross-section of workpiece: 155 x 230 mm - Minimum workpiece length: 480 mm - Max. adjustable cutting depth: 10 mm - Spindle speed: 6,000 rpm MACHINE EQUIPMENT: - Robust, welded machine frame - Large, soundproofed hood with gas struts - Raised control panel on operator side - Steel infeed table 2,500 x 250 mm Table height: 880 mm Side-mounted, spring-loaded infeed conveyor Manual table lubrication behind jointer 1) Lower horizontal spindle 5.5 kW 2 & 3) Vertical spindles (right & left), each 7.5 kW 4) Upper horizontal spindle 7.5 kW FEED: - Feed speed, adjustable: 5 to 25 m/min Feed motor: 1.1 kW (1.5 HP) ADDITIONAL FEATURES: - CE marking - Power supply: 380 V three-phase, 50 Hz - Lockable main switch, automatic star-delta start Emergency stop front and rear - Installed power: 37 kW (50 HP), IN 62A - Braked motors Fjdex Dx Acepfx Aayopl - Spindle drive via cardan shafts Motor for height adjustment: 0.37 kW - Axial spindle adjustment: Lower horizontal spindle: 0 to 15 mm Upper horizontal spindle: 0 to 25 mm Vertical spindles: 0 to 25 mm - Permissible tool diameters: Lower horizontal spindle: Ø 120 to 140 mm Vertical spindles: Ø 100 to 180 mm Upper horizontal spindle: Ø 100 to 180 mm End milling cutter: Ø 140 x 12 x 40 mm - Recommended compressed air supply: 7 bar Working pressure: 6 bar Average consumption: 0.85 Nl/cycle Connection: 1/2" G Operating manual and tools included Year of manufacture: 2000 Price: €9,500

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Bodor, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fpedpfx Aohwaapsayol Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Year of construction: 2021, condition: excellent (used), Boska Cheese cutter Fjdjxru Tyspfx Aayspl Stainless manual cheese cutter, cuts into segments with wire cut, tabletop