Used Automatic Lower Left Aggregate for sale (33,752)

Year of construction: 2025, condition: new, functionality: fully functional, Rolleri segmented die / lower tool system AMADA: 835 mm x 2, 200 mm, 100 mm, 50 mm, 40 mm, 20 mm, 15 mm, 10 mm. V16 R2 85°, V22 R2 85°, V35 R2 85°, V50 R3 85°. Dwodpfx Ajyqyfmoggob Rolleri segmented upper tool system AMADA: 455 mm, 300 mm, 150 mm, 100 mm, 50 mm, 40 mm, 20 mm, 15 mm x 2, 10 mm and left horn 100 mm + right horn 415 mm. R 0.8 / 85° H 66.5.

Condition: used, mileage: 267,365 km, power: 335 kW (455.47 HP), axle configuration: 4x2, color: white, driver cabin: sleeper cab, gearing type: automatic, Year of construction: 2022, Equipment: ABS, EBS, air conditioning, For inquiries regarding the vehicle, please contact Mr. Seidel (tel. ). Mercedes-Benz Actros 1846 LS 4x2 semi-trailer tractor unit. A1C Front axle 7.5 t, A2E Rear axle, ring gear 440, hypoid, 13.0 t, A3D Rear axle with active lubrication, unstepped, A5C Axle ratio i = 2.733, B1B Electronic braking system with ABS and ASR, B2A Disc brake, on front and rear axles, B2X Parking brake, electronic, C0G Frame overhang 1050 mm, C1Y Wheelbase 3850 mm, C5A Chassis design for ADR, C5B Footplate over frame, partial covering, C5D Step, behind cab, left, D0A Leather steering wheel, D0L Smoker's package, D0S Compressed air connection, in cab, D0U Smoke detector, in cab, D1C Driver's air-suspended seat, comfort, D2Y Seat belt control, D3B Comfort bed, lower, D3Q Seat cover, velour, D4S Sun visor, 1-piece, electric, windshield, D4Z Sun visor, side, driver and passenger side, D6C Electric stationary air conditioning, D6G Automatic climate control, D6I Waste heat recovery, D6M Hot water auxiliary heating, cab, D6V Noise and heat insulation cab, D7F Stowage flaps, above windshield, one lockable, D7G Stowage compartment lid, driver and passenger side, D7I Stowage trays, for stowage compartments, D7J Drawers, under bed, D7K Drawer, under instrument panel, D7V Table, on passenger side, D7Y Luggage compartment, at top of rear wall, D8N Lifting roof, electric, D8X Low seat box, lowered by 40 mm, E4B Interface, Fleet Management System FMS, E5A Switch No. 1 for external bodywork electrics, E5B Switch No. 2 for external bodywork electrics, E5H Night driving light switch, E5K MirrorCam switch, on bed, E5X ADR type class AT, E5Z ADR accessories, fire extinguisher in stowage compartment + behind cab, E6A Trailer socket 24 V, 15-pin, E6Y Reversing warning, combined with hazard warning lights, E7F Cable remote control for air suspension, E9G Preparation for electrical equipment, E9I Preparation for switch, lift axle, semi-trailer/trailer, F1I L-cab StreamSpace, 2.50 m, flat floor, F3C Cab mounting, comfort, air-suspended, F3W Cab tilting mechanism, mechanical-hydraulic, F6D Windshield tinted, with band filter, F6I Front mirror, heated, F6Q Air horn, F6T MirrorCam, F7B Bumper, corners made of steel, F7C Bumper, center part with towing eyes, F7X Cab entry left/right, fixed, F8E Locking system, with central locking, F8F Comfort locking system, F8V Light sensor, F8W Rain sensor, G0T Predictive Powertrain Control, G0U Driving program economy, G2B Gearbox G 211-12/14.93-1.0, G5A Single-plate clutch, G5G Mercedes PowerShift 3, H2C Saddle coupling distance +600 mm, I2G Tires tubeless, 315/80 R 22.5 front/front axle/steerable axle, I2H Tires tubeless, 315/80 R 22.5 rear axle, I6X Air suspension, rear axle, J1O Tachograph digital, 2nd generation, ADR, J1S Tachograph manufacturer VDO, J2J Sound system, J2M Aux-in, in side wall compartment, right, J2U Navigation system, J2Y CB radio, 24 V, J3U Preparation for Fleetboard Manager App, J3V Truck Data Center 7, J3Z Axle load measuring device, J6C Multimedia cockpit, interactive, J6Y Remote Online, J6Z Preparation for Mercedes-Benz Truck App Portal, J8Y Preparation for Truck Data Center 7, J9D Preparation for toll collection, K2P Tank 390l+130l hydraulic oil, left, 650x700x1365 mm, aluminum, K3V AdBlue tank 60 l, left, L1A Bi-xenon headlights, L1D Automatic high/low beam and cornering lights, L1I Fog lights, LED daytime running lights, L1P LED taillights, L2H Side marker lights, flashing, L3A Work lights, lower, L3C Work lights,... Dwsdjztlt Tjpfx Aggob

Condition: ready for operation (used), Year of construction: 2010, Large semi-automated Pace cutting system Polar 137 XT-Autotrim with pile lifter, jogging system with count scale, gripper transport system, rotary gripper, and delivery unit Year: 2010 Approx. 5.43 million cuts Workflow: The material to be cut is raised to an optimal working height using a loading lift, placed into the jogger by the operator, automatically jogged, and then transported via the Autotrans gripper system from behind the jogger to the rear table of the high-speed cutter and rotated. After cutting, the Transomat automatically stacks the layers onto a pallet, allowing continuous cutting operations. Polar Stack Lift LW 1200-4 Platform size: 80 x 126 mm Load capacity: 1200 kg Equipped with steplessly adjustable photoelectric sensors for automatic lifting and lowering. Jogger RAH-4 with air removal roller and unloading for rear-table feeding Working format up to 75 x 105 cm Unloading of the jogged cutting material occurs automatically to the rear into the STR stacking rack. The Autotrans gripper transport system then handles layer transport onto the rear table of the high-speed cutter. Sheet scale – Polar count scale Avery Weigh-Tronix For creating quantity-accurate cutting layers Gripper transport system POLAR Autoturn – clamp transporter for rear-table loading and rotary gripper Takes over the prepared cutting layer from the stack rack or buffer table Via air tables, which use air cushion for optimized material handling, the cut material is transported directly onto the rear table of the high-speed cutter and placed with precision. The cutting layer is held firmly by the grippers during transport, ensuring even pre-aligned layers remain precisely squared during movement. Cutting machine Polar 137 XT-AT with touch control And Autotrim function for automatic waste removal under the front table during cutting Dwsdpfxsxd U Sae Aggjb - Lowerable side gauge left (required for rear-table loading); also allows handling of formats with a diagonal of...

Condition: excellent (used), CATALOGUE NUMBER 7817 TECHNICAL DATA DDCA – Double-sided profiling machine - length of moulding 180 – 850mm - width of moulding 30 – 75mm - thickness of moulding 10 – 45mm - spindle diameter 30mm - max. cutter diameter 250mm - 4 cutters included 5 spindles: left side: - 1) vertical upper 2.2kW Dedpfozkt Rzox Aggswb - 2) horizontal lower 2.2kW right side: - 1) vertical lower 2.2kW - 2) vertical upper 2.2kW - 3) horizontal lower 2.2kW - spindles adjustable up/down, left/right - 2 material clamping devices - stepless feed rate adjustment 0-10m/min - central lubrication via oil pump - pump motor 2.2kW - diameter of dust extraction nozzle 5x100mm - dimensions (L/W/H) 1900x2230x1530mm DDGA – Four-sided planer - width of workpiece 35 – 130mm - thickness of workpiece 10-60mm - min. length of workpiece 200mm spindle arrangement: - 1) lower 5.5kW - 2) right 5.5kW - 3) left 5.5kW - 4) upper 5.5kW - spindles adjustable up/down - upper and lower spindle diameter 40mm - right and left spindle diameter 30mm - 4 feed rates 13/20/26/40 - central lubrication of chain via oil pump - diameter of dust extraction nozzle 4x120mm - dimensions (L/W/H) 3200x1370x1830mm DBCA – Profiling machine feeder - max. feed rate 40m/min - max. width of moulding 150mm - motor 0.55kW - overall dimensions (L/W/H) 2320x600x1150 DBGA – Moulding feeder - length of mouldings 200-600mm - width of mouldings 30-20mm - thickness of mouldings 10-40mm - stepless feed rate adjustment 10-40m/min - motor 0.75kW - overall dimensions (L/W/H) 1500x500x980mm - total weight approx. 4900kg Net price: 63900 PLN Net price: 15200 EUR depending on the exchange rate of 4.2 EUR (Prices are subject to change due to exchange rate fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and names are used solely for informational purposes, to identify the product. We only resell products that the manufacturer has previously placed on the market. We have no business relationship with the manufacturer.

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 4,200 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 115 mm, spindle motor power: 30,000 W, overall weight: 6,850 kg, controller manufacturer: OKUMA, controller model: OSP-P300LA, number of axes: 5, This 3-axis Okuma LB 3000 EX II was manufactured in 2022, featuring a robust horizontal turning capability. It includes an Iemca KID 80 bar feeder, a 250 mm SMW chuck, and a 170 mm Kitagawa chuck. With a main spindle motor power of 22 kW and rotational speeds up to 6000 rpm, it ensures efficient turning operations. If you are looking to get high-quality turning capabilities consider the Okuma LB 3000 EX II machine we have for sale. Contact us for more information. • Distance between spindle noses: 1085 mm • Maximum turning diameter: 340 mm • Bar capacity through main spindle draw tube: 80 mm • Sub spindle bore: 63 mm • Bar capacity through sub spindle draw tube: 52 mm • Rotational speed of driven tools: 45–6000 rpm • Control: Okuma OSP P300L (OSP Suite), 15" screen • Configuration: Main spindle (left) + sub-spindle (right), Y-axis, turret with driven tools (radial tool mounting) • Max turning diameter: 340 mm • Spindle speeds: • Left (main): 42–4,200 rpm • Right (sub): 50–6,000 rpm • Spindle motors: • Left (main): PREX 30/22 kW • Right (sub): PREX 11/7.5 kW • Special main spindle (“Big Bore” option): Ø91 mm, nose JIS A2-8, 42–4,200 rpm, PREX 30/22 kW, max torque 700 Nm • Control/monitoring functions: • Spindle orientation • Cutting load monitoring (“Load Monitor”) selectable for all axes and spindles • One-Touch IGF M-E conversational programming • Tool life monitoring: by workpiece count, by cutting engagement time, by cutting load; automatic sister-tool change or stop/alarm if no replacement • Machine options: Additional flushing for left slideway covers Additional equipment • 250 mm SMW chuck on the main spindle • 170 mm Kitagawa chuck on the sub spindle • 6 sets of soft jaws • 4 straight driven tool holders • 4 angled driven tool holders • 2 double turning tool holders Dodpfxsx D Rvns Aggowb • 4 boring bar holders • 8 standard turning tool holders • 8 straight ER holders with about 30 ER collets • Workholding (chucks) • SMW‑Autoblok BBD250‑77 / A8, hydraulic 3‑jaw chuck • Includes: 1 set soft top jaws, hydraulic cylinder VN170‑77, drawtube ID 72 with cylinder flange • Max speed: 4,000 rpm; bar capacity: Ø72 mm • Kitagawa B206 (Ø170 mm), hydraulic 3‑jaw chuck • Includes: 1 set soft top jaws, hydraulic cylinder SR1146, drawtube/cylinder flange, ejector • Max speed: 6,000 rpm • Part handling • Part catcher, swing-bucket type, Ø80 × L150 mm, max 5.8 kg • Chip management • Cromar chip conveyor for LB3000 EX II C1000, slat type, right-hand discharge • Bar feeding and interfaces • Bar feeder interface (OSP P300L) • IEMCA KID 80+ bar feeder (SX – Left) for Okuma LB3000 EX II • Includes: 7" touchscreen HMI, mechanical/electrical interface kit, additional light kit, roller guide kit for round/hex bars, spindle extension, bar pusher D=26 mm, bar pusher D=15 mm, paper manuals • Accessories: Floor frame for longitudinal movement in Z; spindle liner/reduction tube Technical Specification Counter Spindle Yes Driven Tools No

Condition: used, Year of construction: 2011, Perfect binding line Müller Martini Acoro A6 (3026-20) Year: 2011 Consisting of Gathering machine Müller Martini 1571 Year: 2011 - 2016 Description: - Hand feeding station - Number of gathering stations: 18 - ASIR Automatic Signature Image Recognition: ASIR III - ASAC automatic self adjusting calliper - Pump(s) - Set up element - Reject gate for incomplete products: 3715 - Transfer into the binder Perfect binder Müller Martini Acoro A6 (3026-20) Year: 2011 Description: - Semi automatic setting - Colour monitor with touch screen - Book Data Center: BDC - Number of clamps: 20 - Main milling station - 1st spine preparation station - 2nd spine preparation station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: ICS-A C80 - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: MOD 40 Pot - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: CLS C18 - Gauzing station - Drum cover feeder - Scoring station: 4 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Müller Martini 3520 Year: 2011 - 2016 Description: - Transport system, length (approx): 40 mtr - Escape delivery Three knife trimmer Müller Martini Merit-S Dwedjzzki Nepfx Aggeb Year: 2004 Description: - Right hand infeed - Automatic hopper feeder for inline production - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 4-17 Book stacker Müller Martini UNO Year: 2011 Description: - Delivery to the right - Roller table delivery on the left Muller Martini Acoro A6: . Max. mechanical speed: 6.000 cycles/h Maximum size range: 430 x 320 x 60 mm Minimum size range: 140 x 100 x 2 mm Muller Martini Merit S: . Max. mechanical speed: up to 4.000 cycles/h Maximum size (uncutted): 384 x 320 mm Minimum size (uncutted): 140 x 103 mm Maximum size (cutted): 304 x 310 mm Minimum size (cutted): 136 x 100 mm Book thickness (min): 2 - 80 mm Muller Martini Uno: . Max. mechanical speed: up to 16.000 cycles/h Maximum size range: 500 x 320 x 80 mm Minimum size range: 140 x 100 x 2 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: ready for operation (used), Year of construction: 2025, operating hours: 1,351 h, controller manufacturer: FANUC, controller model: i Series iPlus, This 6-axis DN Solutions DNX 2100S Advanced was manufactured in 2025. It features a FANUC i-Series control, a 6-axis configuration including B and C axes, and a tool magazine with 60 positions. The machine offers full turn-mill capabilities, through-spindle coolant up to 70 bar, and a Renishaw probing system. Consider the opportunity to buy this DN Solutions DNX 2100S turn-mill centre. Contact us for more information about this machine. • Axes Configuration: 6 axes (X, Y, Z, B, C1, C2) • B-axis milling spindle (indexing accuracy 0.0001°) • Milling/Main Spindle: • Tool Interface: HSK-C63 • Max Speed: 12000 rpm • Power: 18.5 / 15 kW • Max Torque: 58 Nm • B-axis Travel: 240° (±120°) • Left Spindle: • Chuck Size: Ø255 mm (10") • Max Speed: 4000 rpm • Power: 22 / 15 kW • Max Torque: 456 Nm • Right (Sub) Spindle: • Chuck Size: Ø210 mm (8") • Max Speed: 5000 rpm • Power: 18.5 / 15 kW • Max Torque: 326 Nm • Tool Magazine: 60 positions • Features: Driven tools, Full turn-mill capability • Through-Spindle Coolant: 70 bar • Programmable Coolant Pressure (7 steps) • Coolant Through Opposite Spindle • Oil Skimmer • Chuck Washing • Work Area Washing: 4.5 bar • Coolant Level and Pressure Monitoring • Oil Mist Collector Preparation • Hinged Belt Chip Conveyor Dwodjzv Ruuepfx Aggsb • Renishaw Probing System (Measuring Head Included) • Automatic Tool Measurement • Radio Tool Measurement System RMP60 • Manual Pulse Generator (MPG) • 3-Color Signal Tower • Automatic Bar Feeder: 1 meter (included) • Bar Feeder Interface Package • Parts Conveyor with Belt • Part Ejection from Sub Spindle

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Dwodsxy Tmnepfx Aggsb

Condition: excellent (used), Year of construction: 2006, Ref:11128 . 2006 Longford Inserter-Folder Primarily for the production of greetings cards, but can produce other inserted products at high speed. Comprising; Upper C700 Friction pile feeder for insert, top-loading, bottom feeding. Dwjdpozmydaefx Aggsb Lower C700 Friction pile feeder for main product, top-loading, bottom feeding. Feeders can be configured in either a single or batch feed mode. Easily integrate with OEM equipment. Heavy duty scoring roller shafts. Robatech IK 40/4 glue control unit. PVA cold gluing system with single head. Longford digital control unit Automatic counter with batch marking Belt folding element Hydraulic variable speed Stream delivery conveyor Including accessories, tools and manuals. Specification: Sheet size, Max: 355 x 254 mm Folds to: 177 x 254 mm Min: 102 x 102 mm Folds to: 38 x 76 mm Stock weight : 100 – 400 gsm2 Belt speed : up to 175m/min.

Condition: good (used), mileage: 157,229 km, power: 130 kW (176.75 HP), first registration: 06/2014, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: red, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel, Year of construction: 2014, Equipment: AdBlue, Bluetooth, EBS, air conditioning, crane, cruise control, electric window regulation, fog lights, soot filter, trailer coupling, = Additional Options and Accessories = - Brake booster - EPS (Electronic Power Steering) - Low noise - Tilting hydraulics - Particle filter - Radio/CD player - Sunroof - Side door - Toolbox = Further Information = Suspension: Leaf spring suspension Front axle: Steerable Unladen weight: 7,570 kg Payload: 4,420 kg GVW: 11,990 kg Crane: MKG HLK 76, year of manufacture 2014, behind the cab Technical condition: good Optical condition: good Reference number: 45 Vehicle number: 45 Mercedes-Benz Atego 1 / Tipper with Crane MKG HLK 76 / Full Leaf / Euro6 / 157,000 km .: WDB9672051L880906 German vehicle TÜV (technical inspection): 09.2026 - HU (main inspection): 03.2026 Suspension: Leaf / Leaf Transmission: Manual transmission Air conditioning Engine brake Cruise control Trailer coupling Euro6 3-sided tipper, Meiller Crane: Brand: MKG Type: HLK 76 Year: 2014 Special equipment: Trailer brake 2 - line, trailer socket 24V / 15-pole, audio system: CD radio (Bluetooth), battery 135 Ah, air horns (2) on the cab roof, suspension: front springs 5.1 t, transmission - mechanical shifting, pressure control system 10 bar, hydraulic pump (Meiller pump - 7 pistons - 270 / 63), fuel tank: 180 L, plastic, heated air dryer, auxiliary drive MB 60-2C with MPA, parameterizable special module, spare wheel, rear crossmember for trailer coupling, external sun visor, steel rims 7.50x19.5, socket 12V / 15 A in the dashboard Dedezz A Ikjpfx Aggjwb Additional equipment: Emission standard EURO 6, axle configuration: 4x2, axle load front axle 5.3 t, approach/front mirrors, exhaust pipe to the center of the vehicle, exterior mirrors electrically adjustable, left, cockpit Classic, differential lock rear axle, compressed air tank steel, entry two-stage, cab: S ClassicSpace, cab variant: ClassicSpace, suspension: leaf / leaf, suspension: rear springs 8.1 t, transmission 6-speed - type: G 71-6, urea tank (AdBlue): 25 L, lifting roof manually (steel), rear axle differential 390, info display 10.4 cm with additional display, body/superstructure: tipper, engine 5.1 L - 130 kW diesel (OM 934), engine brake, engine compartment encapsulation, rear window, seat cover / upholstery: fabric, seats in the cab: passenger single seat, fixed, seats in the cab: driver's seat suspended seat standard, splash guard rear fender, stabilizer rear axle, tachograph / EC control unit, daytime running lights automatic, rear underrun protection fixed, front underrun protection, immobilizer, permissible total weight 11.99 t No liability for printing and typographical errors, changes, prior sale and errors reserved! = Company Information = No liability for printing and typographical errors, changes, prior sale and errors reserved! Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email.

Condition: used, mileage: 28,338 km, power: 130 kW (176.75 HP), first registration: 08/2025, fuel type: diesel, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 6,836 mm, total width: 2,040 mm, total height: 2,590 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, * 5-year manufacturer's warranty for Germany, starting from the first registration * Trailer hitch included * Approved as a 3.5-ton vehicle * Long wheelbase * Electronic Stability Program (ESP) * One towing eye in the front * Disc brakes in the front * Front-wheel drive * Leather multifunction steering wheel with Tiptronic * Partition, without window * Three-point automatic seat belts in the front with electric belt pretensioner * Double bench seat in the driver's cabin on the right * Seat in the driver's cabin on the left * Extended interior noise damping * Windshield, heat-protective glass * Central locking "Keyless-Go" without safe function * Airbags for driver and front passenger, without knee airbag, with front passenger airbag deactivation * Exhaust concept, WLTP3 N1-III, N2//EU6EA * Rubber floor covering in the driver's cabin * Wooden floor in the cargo area * Approved as a truck * Sliding door on the right in the cargo/passenger compartment * Exterior mirrors, left and right, convex plus wide-angle * Tie-down points for securing cargo * Lane keeping assist * C-rails, side, partition, and roof rails * Interior grab handle (entry at the partition) * Exterior mirrors, electrically foldable, electrically adjustable, separately heated * Immobilizer, electronic * Entry handles on the rear pillar, left and right * Tire pressure control, frequency 433 MHz High * Start/stop system with recuperation * Park steering assistant * Optional infotainment system (MIB3 MP) version 1 * Side marker lights * Halogen double headlights * Front Assist with warning and braking for vehicles, pedestrians, and cyclists * Windshield wiper interval control with light/rain sensor * Key for locking system with remote control * 4 speakers (passive) * Cruise control (ACC) electronic * Daytime running lights with assist lighting * LED interior lighting concept in the passenger/cargo compartment * Preparation for Smart TCO * Seat belt control, E-contact in the seat belt buckle * Wired & Wireless App-Connect * Comfort telephony, without external antenna connection * 4-cylinder turbo diesel engine, 2.0 L / 130 kW (4V) TDI * Online service, with OCU, with head unit coding, without WFS connection * Distraction and fatigue detection * With socket in the front * 8-speed automatic transmission * Preparation for alcohol interlock * With rear view camera system (version 2) * Air conditioning with electronic control * With side wind assist * With speed limiter (LIM) * With UNECE CS&SU * Pan-European eCall * Professional assistance package including park steering assistant & parking assistance in the front and rear area including side protection * With multifunction camera * Heat-protective glazing * With traffic sign recognition * With step * Digital radio reception * Prepared for VW Connect and VW Connect Plus * 4-cylinder diesel engine 2.0L, aggregate 03N.G * External USB Type-C data and charging ports with increased charging performance * Hill start assist * Parking brake * Navigation system Discover Media with 26 cm (10.4") touch color display with 4 speakers Conversion service for panel van commercial vehicles possible: e.g. Retrofitting of trailer hitch €990.00 Trailer load increase €714.00 Dwjdpfxezzuuvj Aggsb Front bumper €790.00 Cargo area lining from €1390.00 Conversion MIXTO €6990.00 Bench seat system with individual seats €7900.00 Vehicle is from 1st hand, service booklet, first owner. We will gladly accept your used car in trade-in, special financing from 5.49% possible. DELIVERY

Condition: used, maximum load weight: 44,050 kg, overall weight: 61,000 kg, axle configuration: 3 axles, first registration: 10/2024, next inspection (TÜV): 10/2026, Equipment: ABS, Excerpt: Equipment Gooseneck: Gooseneck in SNT design to optimize the loading area length, length approx. 3,750 mm. The gooseneck can be raised and lowered hydraulically and also detached. Technical fifth-wheel load: 34,000 kg. For semi-trailer tractor: 6 x 4 or 8 x 4 (or 6 x 4 with a 1-axle dolly 235/75-17.5). Lowbed: Lowbed designed as a telescoping, low-profile platform with an extendable front section and a mechanical locking mechanism. Length x width approx. 7,550 mm x 2,740 mm. Rear chassis: Rear chassis with a closed outer frame, diamond-plate flooring, and a continuous, prism-shaped excavator well, approx. 1,450/900 x 505 mm, open at the rear. Braking system: Braking system from WABCO EBS-E, in accordance with EU regulations. Axles and suspensions: PENDEL-AXLE, all axles with hydro-mechanical forced steering. Hose rupture valve on the axle equalization cylinder with automatic RESET function. Technical axle load: 12,000 kg each. Hydraulic axle equalization. Tire specification: 245/70 R 17.5 3PMSF - Load index 143/141L (146/146F) - Manufacturer of our choice. Painting: Color of the semi-trailer: RAL 3002 Carmine Red. Included accessories: - Steel front wall, pluggable, approx. 400 mm high. - Round NATO socket on the front connection bar (Maeler & Kaege VG 96 917). - 3 kW electric-hydraulic unit for controlling the hydraulic operations, with the exception of hydraulic winches. - Outriggers on the gooseneck with mounting holes for attachable lashing rings. The first hole is approx. 200 mm from the front, then approx. every 400 mm. - 2 pairs of attachable lashing rings included (LC 5,000 daN). - 1 lashing ring each on the left and right of the rear inclination of the gooseneck (LC 10,000 daN). - Diamond-plate flooring above the gooseneck. - 3.5-inch kingpin. - Guide plate on the gooseneck for the fifth-wheel plate, approx. 500 mm wide. - Hydraulic crossbeam for supporting the gooseneck on the semi-trailer tractor or a dolly. - 1 pair of steel ramps with ladder-like treads and fastening bolts for bridging the receiving hooks of the lowbed. - Option for attaching the steel ramps at the rear between the outriggers of the gooseneck. - 1 lashing ring each on the left and right of the front crossbeam (LC 10,000 daN). - 6 pairs of threaded blocks on the outside of the inner beams of the loading platform for mounting attachable rings M24 (LC 8,000 daN). - 2 pairs of attachable rings M24 (LC 8,000 daN) included. - 6 pairs of recessed lashing rings on the outside of the outer beams of the loading platform, foldable inwards and outwards (LC 10,000 daN). - 1 pair of threaded blocks at the front and rear of the outer beams of the loading platform for mounting attachable rings M24 (LC 8,000 daN). - 1 pair of attachable rings M24 (LC 8,000 daN) included. - Preparation for attaching screw-on container securing devices for 1x 20' or 1x 40' containers on the outriggers. Without container locking mechanisms. - Mechanical bolt-latch coupling of the lowbed to the chassis, for exchanging the loading platform or installing extension beams. With electro-pneumatic-hydraulic couplings. Dedpfx Aszzudwjggowb - Attachment bar at the front of the rear chassis for the lowbed, for loose access ramps. - 4 pairs of hanging lashing rings in the outer frame of the rear chassis (LC 10,000 daN). - 1 pair of lying lashing rings at the front in the excavator well of the rear chassis (LC 16,000 daN). - 1 pair of lying lashing rings in the excavator well in the area of the 2nd axle of th

Condition: used, Year of construction: 1984, machine/vehicle number: 0278, type of input current: three-phase, input voltage: 400 V, Mitre cold circular saw EISELE type VMS-III-S-HYD Type No. 430 Machine. No. 0278 Year of construction 1984 Sawing range at 90°: (round) Ø 120 mm Sawing area at 90°: (flat) 150 x 110 mm Sawing range at 45°: (round) Ø 100 mm Sawing range at 45°: (flat) 120 x 100 mm Saw blade diameter: 350 mm Saw blade speed: 8, 16, 33, 66 rpm. (2 gear stages + 2 motor speeds) Mitre cut 45° to the left, 90° and up to 30°(60°) to the right, infinitely variable Motor power: 2 and 2.6 kW Mains connection: 380 Volt, 50 Hz Features: - Semi-automatic vertical cold circular saw - Hydraulic material quick clamping device Dodpfot A Arlex Aggswb - Infinitely adjustable hydraulic saw blade feed - Convenient miter adjustment with fixed stops - Saw carriage on very stable rectangular guide - Convenient and stepless stroke adjustment of the saw unit via clamping lever - Generously dimensioned gearbox - with Eisele rotation compensation for long saw blade service life - Simple saw blade change - High productivity with minimum space requirement (less than 1 m²) - Coolant system in the machine base - Central lubrication (manually operated) Space requirement: 1100 x 710 x 1900 mm (L x W x H) Weight 490 kg The machine can be tested / demonstrated under power on site. All information without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or for any injury to life, limb or health.

Condition: used, Year of construction: 2019, Saw blade diameter: 350 mm Cutting area flat 90°: 170 x 100 mm Sawing area flat 45°: 120 x 100 mm Cutting area round: 120 mm Pneumatic Saw Blade Feed Coolant pump / minimum quantity spray device Pneumatic material clamping Presented for sawing of stainless steel Length stop with automatic positioning up to 6200 mm Roller conveyor with 1000 mm left Dodpfx Agsznxg Negswb Weight: approx. 800 kg

Condition: good (used), mileage: 963,434 km, power: 309 kW (420.12 HP), first registration: 01/2006, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 4x2, wheelbase: 3,720 mm, fuel: diesel, brakes: retarder, color: other, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro5, suspension: steel-air, total length: 6,020 mm, total width: 2,550 mm, total height: 4,010 mm, Year of construction: 2006, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, parking heater, power mirror, retarder, seat heater, traction control, = Additional Options and Accessories = - Heated mirrors - Digital tachograph - Trip recorder (control unit) - Fixed - Halogen lamp - High-pressure pump - Manual - Auxiliary drive - Topline - Auxiliary braking system = Notes = Number of axles: 2, Configuration: 4x2, Total tank capacity: 710 liters, Height of the fifth wheel coupling: 127 cm, Fifth wheel coupling: Fixed, Number of locks: 1, Winch pulling capacity: 401 tons, Suspension type: Air suspension, Cabin type: Topline, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Color: Multi-colored, Metallic, Heated mirrors, Lighting type: Halogen lamp, Air conditioning, Seat heating, Bluetooth, Engine power: 309 kW (414 hp), Fuel: Diesel, Euro: 5, Transmission type: Opti-cruise, Transmission type: Scania, Gears: 12, Clutch pedal, Auxiliary braking system, Retarder brand: Scania, Power steering, ABS, ASR, Auxiliary drive, PTO type: 1, High-pressure pump, Central locking, Seat arrangement: 1+1, Seat upholstery: Leather, Seat adjustment: Manual = Further Information = Transmission Transmission: SCA, 12 gears, Automatic Axle Configuration Tire size: 315/80R22.5 Brakes: Disc brakes Axle 1: Steered; Tire tread depth left: 7 mm; Tire tread depth right: 7 mm; Suspension: Leaf spring suspension Axle 2: Dual tires; Tire tread depth left inside: 6 mm; Tire tread depth left outside: 9 mm; Tire tread depth right inside: 7 mm; Tire tread depth right outside: 8 mm; Suspension: Air suspension Functional High-pressure pump: Yes Dwsdpfx Agszrt Szsgeb Interior Upholstery: Leather Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Identification License plate: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent used vehicle dealerships. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European brands from various years and price ranges. Why buy from Kleyn Trucks? Simple! • Large and rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry through our website. Ask directly about our European warranty package.

Condition: good (used), mileage: 625,836 km, power: 118 kW (160.44 HP), first registration: 01/2011, fuel type: diesel, tire size: 205/75R17,5, axle configuration: 4x2, wheelbase: 3,900 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 6, emission class: euro5, suspension: steel-air, number of seats: 2, total length: 7,030 mm, total width: 2,600 mm, total height: 3,440 mm, loading space length: 3,580 mm, loading space width: 2,260 mm, loading space height: 2,340 mm, Year of construction: 2011, Equipment: ABS, central locking, cruise control, electric window regulation, power mirror, seat heater, = Further Options and Equipment = - Heated mirrors - Digital tachograph - Tachograph (control device) - Halogen lamp - Short cab - Manual - Radio/cassette - Fabric upholstery = Remarks = Number of axles: 2, Configuration: 4x2, Payload: 2095 kg, Unladen weight: 5395 kg, Gross weight: 7490 kg, Total tank capacity: 150 liters, Suspension type: Air suspension, Cab type: Short cab, Cruise control, Tachograph (control device), Digital tachograph, Electric windows, Electric mirrors, Radio/cassette, Color: White, Heated mirrors, Lighting type: Halogen lamp, Seat heating, Engine power: 118 kW (158 hp), Fuel: Diesel, Euro standard: 5, Transmission type: Automatic, Gearbox: ZF, Gears: 6, Power steering, ABS, Starter battery, System length: 88 cm, System type: ,,,,, Central locking, Number of seats: 2, Seat configuration: 1+1, Upholstery: Fabric, Seat adjustment: Manual, Cooling unit manufacturer: Konvekta, Cooling unit model: .?, Cooling unit: Refrigeration compressor, Body insulation, Wall thickness: 90 mm, Type of cooling: Refrigeration and freezing, Day/night cooling: Day cooling, Additional evaporator, Spare wheel, Spare wheel tread: 11% = Further Information = Transmission Gearbox: ZF, 6 gears, automatic Axle Configuration Tyre size: 205/75R17.5 Brakes: disc brakes Axle 1: Steered; Tire tread left: 4 mm; Tire tread right: 4 mm; Suspension: leaf spring Axle 2: Twin tires; Tire tread inner left: 5 mm; Tire tread outer left: 6 mm; Tire tread inner right: 5 mm; Tire tread outer right: 5 mm; Suspension: air suspension Weights Unladen weight: 5,395 kg Payload: 2,095 kg Gross vehicle weight: 7,490 kg Functional Loading platform height: 101 cm Cooling unit: engine-driven Wall thickness: 90 mm Condition Dwsdeyzx Ddjpfx Aggeb Technical condition: good Optical condition: good Damage: none Number of keys: 2 Identification Registration number: BX-XT-09 = Company Information = Kleyn Trucks is one of the world’s largest independent traders in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our offer includes all European brands, years, and price ranges. Why buy from Kleyn Trucks? It’s simple! • Large, fast-changing inventory • Recognized quality • Good pricing • Correct trading practices • We speak many languages • We understand our customers • Support with import and transport • (Export) registration quickly organized • Expert technical services • The security of "recognized quality" • And more… Please visit our website for special offers and our full inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and submit a request through our website. Ask directly about our European warranty package.

Condition: new, Year of construction: 2026, Metal Cutting Band Saw CORMAK S-200RH The CORMAK S-200RH metal cutting band saw is a modern semi-automatic band saw designed for intensive operation in the metalworking industry. It enables cutting at angles from -45° to +60°, providing high precision, repeatability, and efficiency even when processing heavy sections. The machine combines precise blade guidance with automation of key functions, including hydraulic arm lifting/lowering and hydraulic vice control. Main advantages of the machine Hydraulic arm movement control (up/down) with smooth adjustment of lowering speed. Arm position memory function – automatic return to a predefined height. Swivelling saw arm from -45° to +60° with a clear angle scale. Hydraulic quick-clamping vice – suitable for cutting profiles and solid materials. Heavy cast iron saw arm – ensures rigidity and operational stability. Efficient coolant pump with closed-loop cooling system. CE safety system – including limit switches and emergency stop button. Construction and technology The band saw is built on a stable steel base with an integrated hydraulic unit and coolant tank. The saw arm is made from a single-piece cast iron construction, providing high resistance to vibration and twisting, which directly improves cutting quality. The blade guides are equipped with carbide inserts and roller bearings, ensuring accurate alignment and straight cutting of processed materials. A high-performance ABB M3V series motor and worm gear transmission provide two cutting speeds for optimal adaptation to different materials. Precision and work efficiency The machine enables fast and repeatable cutting of pipes, profiles, and solid materials, including very small sections starting from Ø5 mm. Automation of the cutting process (arm movement and hydraulic vice operation) significantly reduces operating time and minimizes operator involvement. The integrated blade cleaning brush maintains proper working conditions and extends blade service life. Applications The CORMAK S-200RH model is designed for: production workshops, steel construction plants, machine manufacturing industries, maintenance departments. Dodoi D D A Sopfx Aggowb It is particularly suitable as a band saw for pipes and profiles in serial production and applications requiring high cutting accuracy and repeatability. Standard equipment Control console mounted on a separate pedestal Integrated hydraulic power unit Hydraulic vice Automatic arm lifting and lowering with position memory function Blade cleaning brush Coolant system with pump Bimetallic band saw blade Technical documentation (DTR) and CE declaration of conformity Optional equipment Material feeding rollers Laser cutting line guidance system Extended cutting length measurement system Semi-Automatic Metal Cutting Band Saw CORMAK S200RH Technical data Parameter Value Machine type Semi-automatic band saw Arm lifting and lowering Hydraulic, smooth adjustment Blade speed 36 / 70 m/min Angular cutting range -45° to +60° Vice Hydraulic Minimum cutting diameter Ø5 mm Minimum material length in vice 30 mm Vice base height 780 mm Cutting blade dimensions 27 × 0.9 × 2910 mm Total motor power 2.1 kW Machine dimensions (L × W × H) 1600 × 800 × 1400 mm Weight 530 kg

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: - Electrics 3x400V 50 / 60Hz - Gimbal-mounted 5-axis electrospindle 12 kW (S6) HSK F63 - 24,000 rpm - ceramic bearings incl. liquid cooling with infinitely Dwsdpfozlbpbox Aggob height-adjustable extraction hood - electric-motor controlled - full rated power at approx. 12,000 rpm - speed: 1000 - 24000 rpm - drive: 3-phase HF motor, inverter-controlled - direction of rotation: clockwise/counter-clockwise - 2 controlled compressed-air connections - interface for aggregates - tool weight (rotating): 6 kg - max. saw blade Ø 350 - spindle cooling: liquid cooling - extraction hood infinitely variable - Profit H350 16.30: CNC machining centre in gantry design (without tool) with digital drives (driven on both sides). The machine column of the Profit H350 16.30 is made of thick-walled, electrically welded rectangular tubes. The steel ribbing inside the column achieves high stability. - Machining field H350 16.30: Travel of the axes: X = 4000 mm Y = 1970 mm Z = 455 mm Working field: X = 3000 mm Y = 1500 mm Z = 150 mm clearance height Axis positioning speeds: depend on the selected safety system (these can be found in the layout). - Travelling gantry driven on both sides - Guide system X axis: The travelling gantry of the X axis is driven via a rack with inclined, crowned tooth form - This guarantees highest precision. The reduction gear ensures highest machining quality and repeat accuracy. The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. - Guide system Y axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Y axis is positioned by means of a ground recirculating ball screw. - Guide system Z axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Z axis is positioned by means of a ground recirculating ball screw. - Automatic central lubrication: The grease is delivered in a controlled manner to the guide carriages of the X, Y and Z axes as well as to the recirculating ball screws in Y and Z. The lubrication process is carried out automatically after a specified time. - 12-position linear tool changer on the left of the machine column incl. a pick-up position for aggregates: The 12-position linear changer ensures shortest changeover times and offers sufficient space for milling tools. One aggregate change position (fitting variants see layout) Max. tool diameter 250 mm Max. tool length 240 mm - Drilling head DH 18 6H 1S: Vertical 12 spindles: 7 spindles in the X direction and 5 spindles in the Y direction. Horizontal 6 spindles: 4 spindles in the X direction and 2 spindles in the Y direction. Forward stroke = 70 mm max. drill length = 70 mm and shank D = 10 mm. All spindles are individually driven and selectable. 1 grooving saw – in the X direction max. saw blade diameter 120 mm max. blade thickness 5 mm max. speed infinitely variable up to 7500 rpm. The drilling group covers the entire working field both horizontally and vertically. - Controlled central extraction connection: Via the program control, either the drilling head or the milling spindle is extracted. This controlled slide gate achieves an optimised extraction performance. Connection diameter see layout - 6 workpiece supports: With front and rear...

Condition: repair required (used), Year of construction: 2016, functionality: not functional, machine/vehicle number: MW144, Technical characteristics: Djdpfxoxxidas Aggowb Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse in X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse in Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse in Z: 24 m/min Main Spindle - Spindle nose: A2-8 - Maximum speed: Left 3000 rpm - Power at 100% duty cycle: Left – 15 kW / Right – 7.5 kW - Maximum swing over bed: 520 mm - C-axis indexing accuracy: 0.001° - Bar capacity: Left spindle – 80 mm / Right spindle – 53 mm Sub-Spindle: - Spindle speed: 6000 rpm - Maximum bar diameter: 53 mm - C-axis indexing accuracy: 0.001° - Travel: 520 mm Tool Turret with Driven Tools - Tool interface: Okuma interface - Number of stations: 12-position lower servo turret, all stations driven - Maximum speed: 4500 rpm - Milling motor power: 4.5 kW Electrical Equipment - Mains voltage: 400V 3-phase - Connected load: 22.5 kVA Dimensions - Machine dimensions (L×W×H): 3200 × 2200 × 1900 mm - Weight: 5500 kg Main Features and Capabilities: - Horizontal design: optimized chip evacuation, parts catcher + custom parts conveyor belt - CNC control: OSP-P300L-R - Chip conveyor - Fire protection system - Tool measurement system (Q SETTER) - Broken tool detection: Load monitoring and automatic force analysis via OSP-P300L-R - Workpiece detection at sub-spindle: Low-pressure compressed air monitoring - Spindle cooling system - Documentation: Electronic / Hard copy available OPTIONAL Bar feeder: TOP Automazione, model FU 352 - Bar feeder (L×W×H): 3500 × 800 × 1200 mm; Weight: 1500 kg Machine Condition: NOT WORKING - Turret disassembled for repair - X-axis ballscrew to be replaced - Heat exchanger / lubrication unit to be replaced - Hydraulic unit to be replaced - Sub-spindle to be repaired - Spindle position encoder to be replaced - Chip conveyor to be repaired - Set of bar clamping guide and accessory kit - Set of bearings for pusher head

Condition: used, maximum load weight: 29,800 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 07/2007, loading space length: 7,300 mm, loading space width: 2,440 mm, loading space height: 1,350 mm, loading space volume: 24 m³, total width: 2,550 mm, total height: 3,329 mm, Year of construction: 2007, Equipment: ABS, 3-axle Schmitz Cargobull SKI 24SL 7.2 ALU box tipper VIN: 120059 Chassis / Components: * Air suspension / Raise and lower function * Lift axle 1st and 2nd axle * Automatic lowering during tipping process * Tires: 385/65 R.22.5 Dwodpfx Agszdl U Segsb * Remaining tire tread: Front ~40/30%, Middle 50%, Rear 30/50% * Foldable underrun protection * Steel chassis (fine-grained steel) Body: * ALU box tipper * CRAMARO E-roll cover * Remote control * Front cylinder Georg, high pressure 250 bar * Volume: approx. 24 m³ * Roll tarp * Work platform with access on the left * Rear door, internally mounted, with 2 hook locks * Aluminum floor, with aluminum wear plate 7mm, approx. 3,450 mm Weights: * Gross weight 35,000 kg * Payload 29,800 kg * Tare weight 5,200 kg Other: * German registration * 1 previous owner New main inspections / safety checks or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer license plates; furthermore, we can arrange for the transport of your purchased vehicles within Germany. Contact us! We speak the following languages: German, English and Russian! No liability for printing and typographical errors, changes, prior sale and errors reserved! Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A large number of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and integrity. As we value customer satisfaction highly, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. Convince yourself! Our service for you: Loading of vehicles We will gladly help you with loading your purchased vehicles. Organization of special transports We will gladly help you with organizing special transports. Day license plates / export license plates We will gladly help you with obtaining export license plates/short-term license plates. Handling of customs formalities We will gladly help you with handling customs matters.

Condition: new, power: 368 kW (500.34 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 3,800 mm, loading space width: 2,480 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Volvo FH 500 8x2 with F990RA.2.28 L616 V30 - New model - Electro-hydraulically steered trailing axle, single-tired - FH Sleeper cab - Wheelbase 5600 mm - Exhaust emissions acc. to Euro 6 Stage E, - with SCR, particulate filter and exhaust gas recirculation - Diesel engine 12.8 l, 510 hp / 375 kW, 2,550 Nm - Volvo Engine Brake+ (VEB+) engine brake. - Braking power 510 hp / 375 kW (D13K) - Meets ADR braking regulations - I-Shift AT2612F, automated 12-speed gearbox (direct gear), max. input torque: 2,652 Nm - Liftable axle - Rear axle RSS1370A, single reduction, 13 t axle load, GVW 70 t - AA tires 315/70R22.5 - Drive axle ratio 2.85 : 1 - Diesel fuel - driver comfort package - Air conditioning with automatic temperature control and sun sensor - Info and media package with navigation - Radio reception: AM/FM - USB port, 3-way - 8 speakers - High instruments: digital driver information display, 12 with 4 views - Second driver information display, 9-inch touchscreen color display - TOMTOM navigation system - AGM batteries, 2 x 210 Ah - Battery indicator in the display (Volts, Amperes and battery status with warning function) - Main switch on the chassis - 330 L aluminum tank on the right, D-shape, 710 mm high, 830 mm long - Fuel tank, normal ground clearance - AdBlue tank on the left, usable content 64 liters - Tank cap lockable - Tank filler neck, splash guard - Exhaust outlet to the rear - 2 foldable wheel chocks, transport mounting - Marker lights on the rear and sides - Trailer coupling with D-value = 190 kN for G-150/G-260 hole pattern - Trailer coupling to frame end 85 mm - Rear frame length 4395 mm, measured from drive axle / 1st drive axle - Rockinger 400 G-150 trailer coupling (Note D-value / max. trailer load!) - Electrical connection for semi-trailer/trailer, 15-pin - Trailer/semi-trailer connection Duomatic - Trailer connections in the center - Stationary trailer brake (active up to 7 km/h) - Underrun protection rear, aluminum, fixed, thin - 4x front axle tires 385/55R22.5 Continental, Hybrid HS3+, rolling resistance class: C, steering axle - 4x AA tires 315/70R22.5 Continental, Hybrid HD3, rolling resistance class: C, drive axle Dwedszl Irpspfx Aggob - 2x trailing axle tires 385/55R22.5 Continental, Hybrid HS3+, rolling resistance class: C, trailing axle - Scavenge pump, electric - Gearbox/I-Shift operation via control unit on the driver's seat - I-Shift driving mode: Standard, Performance and Economy - Autoreturn in Economy mode - No manual intervention in automatic mode, without kickdown - Cruise control - Gearbox oil cooler, basic, water/oil - Air compressor 2-cylinder, 1100 l/min., for vehicles/combinations with increased air demand - Air intake front with normal air filter - Alternator 150A / 4200W - External noise acc. to ECE R51.03 Phase 2, with low-noise certificate and L-sign - Closed crankcase ventilation - Double fuel filter on the engine, large for poor fuel quality, e.g. in Eastern Europe - Fuel filter with water separator - Auxiliary drive (medium-fast PTR-DM), gearbox side, connection: 1 DIN rear for pump - Auxiliary drive on the gearbox, power max. 600 Nm - Dynamic equipment: seats in fabric, lateral vinyl (blue/dark blue) with interior in fabric grey - Driver's seat Comfort, air-sprung, heated, seatbelt in the seat - Passenger seat Standard, air-sprung - Lower bunk, foldable, 2000x815/740/660 mm (center, top, bottom) with safety net - Stand-up heater cab, 2 kW - Storage space under the bunk - Cool box with freezer compartment 33 L un

Condition: new, power: 368 kW (500.34 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 3,800 mm, loading space width: 2,480 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Volvo FH 500 8x2 with F990RA.2.28 L616 V30 - New model - Electro-hydraulically steered trailing axle, single-tired - FH Sleeper cab - Wheelbase 5600 mm - Exhaust emissions acc. to Euro 6 Stage E, - with SCR, particulate filter and exhaust gas recirculation - Diesel engine 12.8 l, 510 hp/375 kW, 2,550 Nm - Volvo Engine Brake+ (VEB+) engine brake. - Braking power 510 hp/375 kW (D13K) - Complies with ADR braking regulations - I-Shift AT2612F, automated 12-speed gearbox (direct gear), max. input torque: 2,652 Nm - Liftable axle - Rear axle RSS1370A, single reduction, 13 t axle load, GVWR 70 t - AA tires 315/70R22.5 - Drive axle ratio 2.85 : 1 - Diesel fuel - driver comfort package - Air conditioning with automatic temperature control and sun sensor - Info and media package with navigation - Radio reception: AM/FM - USB port, 3-way - 8 speakers - Instruments High: digital driver information display, 12 with 4 views - Second driver information display, 9-inch touchscreen color display - TOMTOM navigation system - AGM batteries, 2 x 210 Ah - Battery indicator in the display (Volts, Amps and battery status with warning function) - Main switch on the chassis - 330 L aluminum tank on the right, D-shape, 710 mm high, 830 mm long - Fuel tank, normal ground clearance - AdBlue tank on the left, usable capacity 64 liters - Tank cap lockable - Tank filler neck, anti-splash protection - Exhaust outlet to the rear - 2 foldable chocks, transport mounting - Marker lights on the rear and sides - Trailer bracket with D-value = 190 kN for G-150/G-260 hole pattern - Trailer bracket to frame end 85 mm - Rear frame length 4395 mm, measured from drive axle/1st drive axle - Rockinger 400 G-150 trailer coupling (Observe D-value/max. trailer load!) - Electrical connection for semi-trailer/trailer, 15-pin - Trailer/semi-trailer connection Duomatic - Trailer connections in the center - Stationary trailer brake (active up to 7 km/h) - Underrun protection rear, aluminum, fixed, thin - 4x front axle tires 385/55R22.5 Continental, Hybrid HS3+, rolling resistance class: C, steering axle Dsdpozl Ittofx Aggjwb - 4x AA tires 315/70R22.5 Continental, Hybrid HD3, rolling resistance class: C, drive axle - 2x trailing axle tires 385/55R22.5 Continental, Hybrid HS3+, rolling resistance class: C, trailing axle - Venting pump electric - Gearbox/I-Shift operation via control unit on the driver's seat - I-Shift driving mode: Standard, Performance and Economy - Autoreturn in Economy mode - No manual interventions in automatic mode, without kickdown - Cruise control - Gearbox oil cooler, basic, water/oil - Air compressor 2-cylinder, 1100 l/min, for vehicles/combinations with increased air requirements - Air intake at the front with normal air filter - Alternator 150A/4200W - External noise according to ECE R51.03 Phase 2, with low-noise certificate and L-label - Closed crankcase ventilation - Double fuel filter on the engine, large for poor fuel quality e.g. in Eastern Europe - Fuel filter with water separator - Auxiliary drive (medium-fast PTR-DM), gearbox side, connection: 1 DIN at the rear for pump - Auxiliary drive on the gearbox, power max. 600 Nm - Dynamic equipment: seats in fabric, side vinyl (blue/dark blue) with interior trim in gray fabric - Driver's seat Comfort, air-suspended, heated, seat belt in the seat - Co-driver's seat Standard, air-suspended - Lower bunk, foldable, 2000x815/740/660 mm (center, top, bottom) with safety net - Cab heater, 2 kW - Storage space under the bunk - Cool box with

Condition: new, Year of construction: 2024, color: red, loading space volume: 20 m³, loading space width: 2,500 mm, loading space length: 6,900 mm, loading space height: 1,250 mm, gearing type: other, total length: 6,900 mm, driver cabin: other, Vehicle location: in transit, Structure: ARCHIVE IMAGES Roll-off container for water in accordance with DIN 14505 - Water transport for at least 10,000 liters - Length: approx. 6.90 m - Width: approx. 2.50 m - Height: approx. 1.25 m - Permissible total weight: 14,000 kg - Roll-off frame must be manufactured in accordance with DIN 14505:2015 Djdpfx Agevhmqyjgowb - Water tank with baffles - Dome cover 60 x 60 cm square or round (diameter 60 cm) as entry and cleaning opening - Ventilation valve - Equipment compartment in the rear area for storing 2 B 5m filling hoses, folding containers (Husky 3000 Gal.) and water-carrying fittings, size: min. 80cm deep, 200cm wide, 100cm high, closed with a simple closing flap system or roller shutter - Complete emptying must be possible without a pump at the rear, e.g. two emptying nozzles min. DN 100 with shut-off valves and Storz A coupling DN 125 in the middle of the container with a shut-off valve, also accessible at the rear - Two access nozzles DN 75 with Storz B coupling and shut-off valve, free inlet into the tank, pipe routing in the lower area of the roll-off container on the right and left or both at the back, led outwards - Automatic ventilation and final ventilation valve, volume flow min. 3,000l min - Water level indicator - Color: red RAL 3000 - Storage box for 2 A hoses, dimensionally stable 5 m in roof box design - Plastic coating inside - with overflow possible for use on 3-axle vehicles (tank approx. 11,500L capacity) Delivery time approx. 10 - 12 weeks Available from 5,000-25,000 liters Price depending on the number of liters between EUR 10,000.00 to approx. EUR 20,000.00 per number of liters/volume Available with self-priming water pump, self-lubricating with separate motor, delivery capacity: 129m³/hour 2000l/min, pump height: 17m, grain size: 28mm, fuel diesel, tank: 4.3 ltr., see 2907 for an additional charge of EUR 4,000! Available as a roll-off container and tank ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! - .

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our designated sales area in Germany (Rhine-Main region and North Rhine-Westphalia). Such enquiries will not be answered. Equipment and technical specifications: In intermediate lacquer sanding (Cd-L) configuration Robust, space-saving single wide-belt sander for demanding calibration and fine sanding tasks • Constant working height due to upper part adjustment • Working width: 1350 mm • Over-belt sanding with combination unit • Entire sanding unit inclinable up to 10° • Serrated rubber contact roller of proven hardness • Infinitely adjustable contact roller height according to a grain scale • Pneumatic lifting/lowering of the contact roller according to aggregate selection • Sanding pad with quick-release sliding insert • Parallel spring-loaded, ground steel pressure roller at the infeed • Rubberized pressure roller at the outfeed • Belt drive motor: 11 kW (1100 mm), 15 kW (1350 mm), 18.5 kW (1600 mm), 400 V/50 Hz, soft start for low current draw at startup • Electrically controlled, precisely adjustable height positioning with digital readout • Belt tensioning, control, and oscillation: pneumatic, compressed air usage approx. 2 l/min • Optimum safety thanks to automatic immediate stop with disc brake in case of belt break, belt drift, pressure drop, or opening of belt access door • Workpiece feed: 1.1 or 1.5 kW with fabric-reinforced rubber conveyor belt • Vacuum device for worktable with small parts section, fan integrated in machine frame • Complete electrical system with contactor control; automatic star-delta start of main motor, motor protection, and ammeter for chip removal monitoring • Pass-through height: 200 mm • Sanding belt dimensions: 1350 x 2000 mm • Automatic thickness adjustment across the full working width • Workpiece overthickness protection with immediate feed stop and automatic lifting of machine upper structure • Stepless regulation of material removal • Electronic feed regulation on the control panel, stepless from 3 – 15 m/min • PLC control/programming with color touchscreen and TEACH-IN memory (one-touch based on sanding result, no input required) • Pneumatic conveyor belt tracking control • Workpiece support tables at infeed and outfeed • ENORMATIC: Fully automated rapid setup and feed activation (very useful for large workpieces) • eco* energy-saving mode Djdpfszi Hwfox Aggjwb • Error diagnostics • Order and operating hour counters - Electronic segmented sanding pad, segment width 22 mm (swiveling special version) - Steplessly adjustable sanding belt speed (with program memory) - Ejector nozzles for sanding belt cleaning, demand-controlled, with additional extraction nozzle - Additional sanding shoe insert for lacquer sanding Including swiveling air knife, complete Availability: short notice Location: Flörsheim

Condition: new, Year of construction: 2026, Model CORMAK BS370SA – Modern Automatic Band Saw for Metal The CORMAK BS370SA model is a modern automatic band saw designed for efficient series cutting of pipes, profiles, and solid materials with various geometries. Its robust construction, full automation, and high cutting accuracy make this machine ideal for use in production plants, tool workshops, and metalworking companies where repeatability and reliability are essential. Key Features of the Machine Automatic cutting cycle: clamping, material feeding, cutting, and arm return are all performed without operator intervention. Angle cutting capability across the full working range – up to 45° to the left and 60° to the right. Inverter-controlled band speed adjustable smoothly between 5–90 m/min. Hydraulic control of the arm and vise, ensuring precision and user comfort. Material feed system equipped with a 2450 mm roller conveyor, 370 mm feed per cycle, and ±0.2 mm accuracy. Controller with operator panel: allows programming of cutting parameters, monitoring part quantity, and error signaling. Construction and Technology The CORMAK BS370SA band saw is built on a rigid welded frame, ensuring operational stability and vibration reduction. The hydraulic feed and clamping system, precision blade guides, and stepless speed control guarantee high quality and safe operation. The machine is equipped with a roller conveyor to facilitate automatic material feeding. Dwedpexiv Hcsfx Aggeb Precision and Performance Thanks to high-quality components and modern technical solutions, the CORMAK BS370SA band saw delivers repeatable and precise cuts. Adjustable cutting speed and hydraulic blade pressure ensure long tool life and full control over the machining process. Applications This machine is recommended for facilities involved in serial production, processing of steel, aluminum, and non-ferrous metal components. It is especially suitable as a band saw for pipes, profiles, and solid parts in the steel structure, prefabrication, and precision manufacturing industries. Standard Equipment Control console on a separate pedestal Hydraulic control of the vise and arm Roller conveyor for automatic material feeding Arm position memory Blade cleaning brush Cooling system with pump Bimetal band saw blade CE declaration of conformity and operation manual Technical Specifications Main motor power 1.5 kW (400 V) Hydraulic motor power 0.75 kW (400 V) Blade dimensions 3160 x 27 x 0.9 mm Cutting speed (stepless) 5–90 m/min Saw frame rotation angle Up to 60° Workpiece Cutting Capacity Angle Round ● Square ■ Rectangular ▅ 90° 270 mm 260 mm 370 x 220 mm 45° 240 mm 180 x 180 mm 240 x 160 mm 60° 160 mm 100 x 100 mm — Machine Dimensions Length: 3970 mm Width: 1850 mm Height: 1763 mm Net weight: 770 kg Gross weight: 925 kg The machine is also equipped with an additional roller conveyor: Length: 2450 mm