Used Automatic Powder Booths for sale (24,176)

Condition: used, Year of construction: 2017, Automatic cold press Manufacturer: CMB Type: PFR-CCL Year of manufacture: 2017 Technical data: Credpfx Abozuzw De Djg Motorized loading table 3,500 x 1,600 mm for manual assembly of the plates and automatic loading into the press on the 1,600 mm side. Structure made of welded steel profiles. Devices for adjusting the working height to compensate for unevenness in the floor. Steel rollers. Foot switch. PRESS Plate size: 5,500 x 1,600 mm Loading side: 1,700 mm Stroke: from top to bottom Opening: 450 mm Cold press The plates are made of steel sheet and attached to a steel frame structure. Maximum pressing force: 160 tons. Specific pressure (on 100% of the area): 1.82 kg/cm2 Specific pressure (on 80% of the area): 2.27 kg/cm2 Pressure cylinder: 12 x 80 mm Auxiliary cylinders: 6 x 50/30 mm Power supply: 400 Volt EU/50 Hz/3 PH. + G AUTOMATIC LOADING and UNLOADING of the plates on the lower plate, on the 3,500 mm side. The transport is carried out via a motorized MYLAR belt. The belt is activated by 2 rollers, one of which is located at the entrance and one at the exit of the press. The rollers are driven by a motor with a chain that slides on special guides. The Mylar belt rotates around the lower plate, which rests on special side supports. The belt rotates on 2 rollers, which are located at the entrance and exit of the press. The ends of the MYLAR belt are attached to special rods with devices for tensioning the MYLAR. The upper plate is covered with a Mylar film. The press plates consist of thick steel sheets that are welded to the frame structure. HYDRAULIC UNIT with pump, oil tank and valves for operating the pressure cylinders and auxiliary cylinders that move the upper plate. The hydraulic control unit is located in the upper part of the press to facilitate maintenance. CONTROL PANEL with buttons and switches. Pressure control manometer on the front of the press. UNLOADING MOTORIZED ROLLER TABLE 2,000 x 1,600 mm The unloading table is located at the exit of the press for manual unloading of the pressed plates. Exit side from the press: 1,600 mm. Note: The loading table of the press with the dimensions 3,500 x 1,600 and the unloading table with the dimensions 2,000 x 1,600 are shorter than the press table with the dimensions 5,500 x 1,600, as the press was installed in a line. Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2021, - Working width 1,350 mm - Belt feed speed 2 to 16 m/min - PRO SAND electronic control Automatically Calibrating Sanding Machine Manufacturer: SCM Csdpozuzbcjfx Ab Djrg Type: DMC system Year of manufacture: 2021 Technical data - Working width 1,350 mm - Belt feed speed 2 to 16 m/min - PRO SAND electronic control - PLC terminal with 10.4" LCD color display Unit 1 TIE 5000 working unit for additional table, internal cross-padding - Sequencing system of the unit for belt change by only one machine operator - Automatic brake - Linear blower with timed activation for belt cleaning - Belt dimensions: 150 x 5,000 mm - Chevron belt dimensions: 140 x 4,710 mm PE16T EPICS electronic sector sanding, pitch 16 mm - 16 mm distance between sectors from center to center - Double-acting pneumatic cylinders with adjustable feed/counter feed - Graphite cloth with quick extraction device - Complete management of functions via the electronic Pro Sand control - Motor with inverter power up to 15 kW Unit 2 DO19 orbital unit for 19 rotating disc brushes - Manual adjustment of the unit's working position - 1.1 kW main motor with inverter drive - Independent motor for controlling the orbital movement - Diameter of the rotating disc: 125 mm FT/19/125 Set with 19 rotating discs, diameter 125 mm Unit 3 BF300 working unit for brush roller, diameter 300 mm - Manual adjustment of the roller's working position - 4 kW main motor with inverter drive FT 300 brush roller, diameter 300 mm Unit 4 BF300 working unit for brush roller, diameter 300 mm - Manual adjustment of the roller's working position - 4 kW main motor with inverter drive FT 300 brush roller, diameter 300 mm Unit 5 SC 2620 working unit for super finish pad - Rotation of the belt in the opposite direction of the conveyor belt - Electronic belt swiveling control - Disc brake - Chevron belt dimensions: 1,370 x 2,186 mm - Belt dimensions: 1,370 x 2,620 mm PE16/C EPICS electronic sanding block with sector pitch 16 mm - 16 mm distance between sectors from center to center - Double-acting pneumatic cylinders with adjustable feed/counter feed - Graphite cloth with quick extraction device - Complete management of functions via the electronic Pro Sand control - Inverter motor with a power of up to 15 kW Inverter-controlled vacuum motor integrated into the machine frame, up to 7.5 kW - Rubber-coated conveyor belt, 50 Shore - 4 kW conveyor belt motor with inverter drive Console with integrated PC eye-M and electronic Maestro Pro Sand control with tele service system Device connected to the machine that enables the use of the Maestro Pro Sand software. The integrated LED light strip enables the operator to monitor the machine's status in real time (emergency, operation, etc.) without having to be near the machine itself. It is equipped with a fanless industrial PC with protection class IP53 (IP65 on the front). This robust solution guarantees the highest level of resistance even under the most adverse environmental conditions that an industrial site can offer. The 21.5" LCD color display with a large 16/9 touchscreen enables particularly easy and efficient control of the machine's most important functions: - Full HD display resolution 1920x1080 - LED backlight - Capacitive

Condition: used, Year of construction: 2008, Automatic circular saw machine Manufacturer: Kasto Type: KASTOspeed C9 Year of manufacture: 2008 Technical data - For sawing steel and non-ferrous metals - Test machine, used very little. Crsdpfx Abezuymks Dog - Cutting direction 90°. - Saw blade diameter 250, 285 and 315 mm. - Cutting range approximately 15-90 mm or 15x15-80x80. - Power of drive motor for saw unit 11 kW (special equipment). This enables cutting speeds of 50-700 m/min, among other things. - 2 separate and independently selectable tanks for minimal lubrication. Accessories: - Angle magazine, loading length 6000 mm. - Material trolley with drawbar. - Portal crane, maximum load 1000 kg. - Oil mist extraction system. - Chip conveyor. - Chip tipping container with rollers. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Füller 4 Ventile motor für Vakuum Edelstahlausführung Crodpfjzx Drxox Ab Dsg

Condition: used, Year of construction: 2014, Candle Filter System – Automatic, 3 Filters 2x Filter housings 30" x 3 FBFM33 1x Candle filter FBT013GNW25J 1x Sepex pump Cedpfszx Dhmox Ab Dsrg 1x Pump for injection of oenological product after filtration or reinjection of wine 1x Mounted on skid, fully equipped with fixed piping

Condition: used, - Demonstration machine - Frame and work table made of stainless steel - Liquid circuit for continuous use up to 90⁰C - Filling head fully closed by security glasses, - Automated cycle start, automated tap removal, automated capping - Multifunctional coloured display, with touchscreen - Supply voltage: AC220V/50Hz±10% - complies with the Machinery Directive 2006/42/EC Video:  ?v=BDoyMhHtzIg [1] *Capacity depends on bag type* 3 l bag – approx. 400/420 per hour 5 l bag – approx. 345/370 per hour 10 l bag – approx. 260/295 per hour Crjdpfxszx Dacs Ab Dsg 15 l bag – approx. 210/245 per hour 20 l bag – approx. 175/210 per hour [1] ?v=BDoyMhHtzIg

Condition: used, machine/vehicle number: SH01-332, motor defect. 5000 EUR afte repair Cedpfxozx A Sko Ab Djrg

Condition: used, Year of construction: 2019, Semi- automatic labelling machine model S1/M – CONSOLE 230V, 50 Hz, Single phase Max approx 700 bph Console for labelling adjustment Paper web passage height H=150mm Csdpfx Abjzx Av Nj Dorg

Condition: used, Die halbautomatische Verschlussmaschine RLC1 ist für die Verpackung von Glasflaschen mit 26 oder 29mm Kronkorken geeignet. Die Schließeinheit kann auf Kronkorken von 26 oder 29mm Durchmesser verwendet werden. Wenn man beide Durchmesser braucht, wird eine zusätzliche Schließeinheit geliefert. Der Schließkopf der Kronkorken ist aus gehärtetem Stahl, und auch im Laufe der Zeit ist er verschleißfest. Die Schiene führt die Kronkorken in der richtign Position. Die spezifische Form der Schiene wird spezifisch für die Kronkorken aus Edelstahl 304 gebaut. Diese enthält eine kleine Menge Kronkorken, die manuell eingegeben werden können. Die Schließeinheit zieht die Kronkorken aus der Schiene heraus und steckt sie in den Schließkegel. Auf Anfrage kann man einen Trichter einbauen, um eine größere Menge Kronkorken einzugeben. Den EG-Normen entsprechend startet der Verschlussprozess mit dem gleichzeitigen Drücken von zwei Tasten. Credpjzx Au Ssfx Ab Dog Nach der Positionierung der Flasche auf den Halter, fängt der Verschlussprozess an, die Schließeinheit sinkt auf die Flasche und verschliesst der Kronkorken, automatisch kehrt die Schließeinheit zurück. Maße: L 0,41m H 1,96 m B 0,41 m Gewicht ca. 80kg Gewicht mit dem automatischen Trichter:140kg Max Durchmesser der Flasche 220 ​​mm nutzbare Höhe max 500 mm

Year of construction: 2021, condition: excellent (used), functionality: fully functional, IKA MHD 2000/10 powder wetting and dispersing machine, capacity 2500 liters/hour, solids capacity max. 1300 liters/hour, rotor speed 4200 rpm at 50 Hz, 18.5 kW motor suitable for frequency converter 20-60 Hz, product temperature max. 135°C, operating pressure -1 to +16 bar, operating pressure double jacket max. 2.5 bar, liquid inlet DN 25, solid inlet DN 65, outlet DN 50, product contact parts stainless steel AISI 316L or AISI 316Ti9, frame and lantern piece stainless steel AISI 304, weight approx. 400 kg, used in the production of plant-based proteins (pilot plant) Crsdpfjzu I Tfsx Ab Djg

Condition: used, Year of construction: 2004, total length: 21,000 mm, total height: 2,750 mm, total width: 2,550 mm, Colour: Blue Weight: 8.000 kg Price: On request - Details: - └ Description: Available by 05-2026 (depending on delivery of new machine) - Year: 2004 Credpfjyy Nnqjx Ab Djg - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 9076 - Main motor power: 15 - Control system: Windows 10 - Max. saw width: 450 - Max. saw height: 160 - Infeed table length: 8200 - Outfeed table length: 8900 - Max. infeed length: 8000 - Opstellengte [mm]: 23000 - Opstelbreedte [mm]: 5200 - Opstelhoogte [mm]: 2700 - Veiligheidsvoorziening: Safety light curtain, Enclosed fence - Options: Waste conveyor belt, Label printer, Marking pen - Voltage [V]: 400 - Fuse [A]: 63 - Power [kW]: 15.0 - Transport dimensions: 21000mm x 2550mm x 2750mm (l x w x h) - Transport weight [kg]: 8000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2017, Schuler BEUTLER press Crjdpfxezy Hdyj Ab Dog Type: MC 4000 Year of manufacture: 2017 Pressing force: 4,000 kN Stroke rate: 20-80 strokes/min Stroke adjustment: 40-315 mm Ram adjustment: 200 mm Installed height: 750 mm Table area: 3,000 x 1,400 mm Ram area: 3,000 x 1,300 mm Press weight: 72,000 kg including GSW Schwabe strip feed line Strip width: 80 - 500 mm Strip thickness: 0.8 - 4.0 mm Coil capacity: 5,000 kg

Condition: used, Year of construction: 2001, CNC long-turn lathe Manufacturer: CITIZEN Type: M32 Year of manufacture: 2001 with: Mitsubishi Meldas control system Synchronous spindle Powered tools Backworking capability Turret C-axis Crjdpfjzwk Htox Ab Dsg High-pressure pump Oil mist extraction system Fire extinguishing system Bar loader magazine IEMCA BOSS 432 R/37

Condition: used, Year of construction: 2008, functionality: fully functional, operating hours: 7,765 h, Behringer HBP 263 AG fully automatic metal bandsaw (2008) Crsdszwhdpjpfx Ab Dog Manufacturer: Behringer Model: HBP 263 AG fully automatic metal bandsaw Year of manufacture: 2008

Condition: new, Year of construction: 2023, REF: MM5675 Vigo semi-automatic T-capping machine. Suitable for applying T-caps to 70cl and 100cl bottles.  Manufacturer - Vigo Cjdpfx Aor I Ddkjb Dorg Model - PG2010/TV SEMIAUTOMAT T-CAPPER.  Date of manufacture - 2023. Electric supply - 220 V / 50 hz / 1 phase. Supplied with manual, 1 x T stop corker adjustments for 2 x cap types (miniature and normal), 1 x Head and down channel for different “T” caps sizes and castors.  Purchased brand new in 2023 but never used.

Condition: used, Year of construction: 1994, table length: 1,780 mm, table width: 1,250 mm, pressing force: 320 t, High-performance mechanical punching press with coil line for strip material processing in series production. Manufacturer: Kaiser Pressen Model: KSTU 3150-15 R Machine type: Punching press Year of manufacture: 1994 Press force: 3150 kN Drive type: Mechanical Stroke rate: 20 – 120 spm Ram stroke: 20 – 150 mm Ram adjustment: 150 mm Table area: 1780 x 1250 mm Ram area: 1500 x 1000 mm Shut height: 565 mm Max. tool weight: 3000 kg Strip width: 30 – 800 mm Strip thickness: 0.5 – 3 mm Max. strip thickness: 4 mm Crjdoy Ndyaopfx Ab Deg Strip entry height: 160 – 260 mm Strip speed: 4 – 30 m/min Straightening rolls: 9 pcs Feed accuracy: ± 0.1 mm Coil inner diameter: 508 mm Coil outer diameter: 1000 – 1500 mm Supply voltage: 3 x 400 V Air pressure: 5 bar Location: Radeberg

Condition: used, mileage: 391,403 km, power: 221 kW (300.48 HP), first registration: 04/2013, fuel type: diesel, tire size: 315/70, tire condition: 40 %, axle configuration: 4x2, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2013, Tyre size: 315/70 Csdpfxjzux Ito Ab Derg Tyre profile: 40% Front axle: Steering Rear axle: Double wheels

Condition: used, Technical details: wire diameter - max.: 9,0 mm wire diameter - min.: 2,0 mm voltage: 380 V / 50 Hz V control voltage: 220 V Total power requirement: 18 kW Weight approx.: 5,0 t dimensions: Schmiermittelanlage: 830 x 650 x 1000 mm dimension machine approx.LxWxH: 3,3 x 1,5 x 1,45 m dimensions electric cabinet LxWxH: 0,7 x 1,5 x 1,75 m WIRING AND CUTTING MACHINE / MACHINE WAS UPGRADED WITH A NEW CONTROL SYSTEM IN 2000 A programmable, electronically-hydraulically controlled universal spring coiling machine for the production of right and left-hand tension and compression springs as well as torsion springs. The springs can be produced with any pitch and shape of spring body. Output max. 90 pieces/min. Outer spring Ø 10 - 120 mm Unlimited wire feed length, speed = 27 - 80 m/min. Credpfx Abjvc Aklj Dog Coiling device: two-finger system wire thickness Ø 2.0 - 9.0 mm; spring outer Ø Ø 10 - 120 mm Single-finger system: wire thickness Ø 3.0 - 7.0 mm; spring outer Ø max. Ø 60 mm Equipment: 5x feed rollers, wire holder 3 mm two-finger Spring length measuring device LION PRECISION-PANTHER Wire roller holder POST, motor-driven, mandrel holder Ø 1,400 mm Lubrication system Control cabinet cooler RITA Hydraulic unit Optional many accessories and/or spare parts! i.D. *

Condition: used, Year of construction: 1990, cutting diameter 340 mm saw band length 5334 mm cutting width 340 x 340 mm dimensions of saw-band 5334 x 38 x 1,3 mm min. cut-off length 6 mm multiple feeding length 5400 mm cutting speed 20 - 130 m/min power capacity 5,5 kW voltage 380 V total power requirement 8,0 kW Crodpfxot Tqlbs Ab Dog weight of the machine ca. 2,5 t dimensions of the machine ca. 2,85 x 2,30 x 2,10 m Horizontal automatic band saw.

Condition: ready for operation (used), Year of construction: 1986, Available immediately from our location: Fully automatic milling machine, Busch Type NF 8/32 Year of manufacture 1986 Groove width up to 32 mm Processing length up to 6100 mm Automatic material feed Automatic feed Drive power 5.5 kW Accessories: Support table Clamping devices, milling cutters Coolant system Crjdpfszwudcox Ab Djg Digital display Weight 4 tons Price: EUR 2,500.00 plus VAT, ex works

Condition: new, functionality: fully functional, machine/vehicle number: WV1ZZZSYS9072213, mileage: 10 km, power: 130 kW (176.75 HP), fuel type: diesel, overall weight: 3,500 kg, fuel: diesel, color: red, gearing type: automatic, number of seats: 8, Equipment: ABS, Android Auto, Apple CarPlay, air conditioning, airbag, cruise control, electronic stability program (ESP), full service history, lane keeping assist, navigation system, non-smoking vehicle, parking heater, power assisted steering, tire pressure monitoring, traction control, Vehicle conversion to an MTW (multi-purpose vehicle): Aluminum multi-purpose floor with aluminum checkered plate 6 individual seats in the passenger compartment Front warning lights LED Digital radio antenna for Tetra/GPS Crsdpfszynmcsx Ab Dog Adjustable radio loudspeaker Paint finish: bumpers and side protection strips in white Warning bar LED 1600mm with 17-button control panel in the superstructure console, gooseneck microphone Reading light on the passenger side Central electrical system including ambient lighting left, right and rear 2 storage boxes under the seats including securing straps MTW cladding with checkered plate up to window height and including wheel arches Center console between driver and passenger LEAB PowerAirBox B (230V) including 4m charging cable, automatic ejection and charger Sliding partition grille in the cargo area Folding table between the seat rows 2x 230V sockets outside 2x USB A and USB C in the center RWS reversing warning system Tie-down rails for securing cargo Step including removable center section at the rear and more Optional equipment: 2nd battery with battery monitoring Trailer coupling: fixed ball head Trailer stabilization program Audio-navigation system Discover Media (touchscreen, color display) Optional infotainment system with touchscreen color display 26 cm (10.4"), navigation system Equipment package: combination preparation Vehicle without cargo area partition, child safety lock electrically operated, heated rear window with wiper, windows in the cargo/passenger compartment: - fixed, front left, window in the cargo/passenger compartment: - fixed, front right, window in the cargo/passenger compartment: - fixed, rear left, window in the cargo/passenger compartment: - fixed, rear right, entry handle on B-pillar, roof lining, additional heater, rear wing doors with glazing, interior mirror with anti-glare function Exterior mirrors electrically adjustable and heated Battery and generator reinforced Driving Assistance Package Basic Intelligent Speed Assist including speed limiter Driving Assistance System: High beam assist (Light Assist) Chassis: damping and stabilizers reinforced, front and rear Climatic air conditioning (cab) with 2nd evaporator Storage package, storage: DIN compartment in front under the headliner, interior lights in the cab: reading light in front, additional evaporator Side marker lights Fog lights with integrated cornering light Smoker's package Rain sensor Rear view camera Hinges for rear doors with increased opening angle Heated windshield washer nozzles Headlights LED Daytime running lights LED Mud flaps front and rear Mud flaps front, mud flaps rear Seats in the cab: passenger seat comfort Seats in the cab: driver's seat comfort Auxiliary heater for continuous operation and fuel-powered auxiliary heating Sockets (12V connection) in the cab (4 pieces) Sockets (12V connection) in the cargo/passenger compartment (2 pieces) Tinted rear windows Preparation for all-round warning lights Additional heater and evaporator Additional heater

Year of construction: 1990, condition: used, Cutting angle: 90°-45°, operating hours: approx. 4420h. Equipped with automatic material feed as well as roller conveyors on the left and right with ball-bearing rollers and storage compartments beneath the roller conveyors for short material sections. Including spare saw blades. The coolant was changed approx. 5 operating hours ago. An on-site inspection is possible. Codjzx Ehhjpfx Ab Derg

Condition: new, total height: 1,700 mm, total length: 2,000 mm, total width: 1,480 mm, Equipment: documentation/manual, Semi-Automatic Band Saw Machine Saw blade size 2910 x 27 x 0,9 mm Cutting speeds 20 - 120 m/min Cutting capacity 0° round Ø258 mm Cutting capacity 0° square 250x250 mm Cutting capacity 0° rectangular 320x100 mm Crjdpjzquywjfx Ab Djg Cutting capacity 45° round 210Ø Cutting capacity: 45° square 195x195 mm Cutting capacity: 45° rectangular, 210x100 mm Cutting capacity 60° round 135Ø Cutting capacity 60° square 110x110 mm Cutting capacity 60° rectangular 135 x 100 mm Cutting capacity -45° round 185Ø Cutting capacity -45° square 170x170 mm Cutting capacity -45° rectangular 195x100 mm Weight 390 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Riveting machine, double riveting unit with rotary indexing table, DUNKES Type DN 4 Rotary table, rotary indexing table with SIEMENS control Machine No. P 81 - 5458, Year of manufacture 1982 / 2009 Clamping force 40 kN Rivet shank diameter max. 12 mm Tool shank diameter 16 mm Overhang 190 mm Credsdzp T Nepfx Ab Dog Rivet head stroke per riveting unit approx. 60 mm Rivet spindle speed approx. 1400 rpm Installation height, tool - counter-tool max. 80 mm Compressed air requirement 6 bar Motor power per riveting unit 1.1 kW Mains connection 380 Volt, 50 Hz - Rotary table, indexing table with servo drive, step size programmable via Siemens PLC control - Double riveting unit is adjustable within the machine frame in relation to the rotary table - Table size Ø 295 mm for holding round workpieces - Pneumatic riveting stroke movement - Riveting unit adjustment via geared motor with lead screw, positioning via adjustable microswitch - Modernization of the control system and conversion of the servo drive in the rotary table in 2009 - New electrical control cabinet with Siemens Simatic Panel - Year of manufacture 2009 - Riveting time continuously programmable - Riveting pressure adjustment continuously adjustable via pressure gauge - Micrometer stop for limiting the stroke of the counter-rotating riveting units, 0-60 mm Space requirement L x W x H 3200 x 1250 x 2400 mm Weight approx. 2500 kg Good condition The machine was used for riveting segment saw blades from Ø 400 to Ø 2000 mm. The segments were manually placed on the support disc and fixed with straight rivet pins. The counter-rotating riveting unit rivets the pin simultaneously from both sides. The controlled table automatically rotates to the next working position. Ideal for saw blade manufacturers and repair companies. Or for the construction of a special machine. The riveting unit can also be easily removed and used as a conventional riveting machine by creating a suitable counter-tool.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 1,618 h, travel distance Z-axis: 430 mm, number of axes: 5, number of slots in tool magazine: 16, table length: 4,300 mm, table width: 2,205 mm, spindle motor power: 13,000 W, spindle speed (max.): 20,000 rpm, swivel angle B-axis (min.): -99 °, swivel angle B-axis (max.): 100 °, swivel angle C-axis (max.): 360 °, This 5-axis BIESSE Rover A FT 2243 including WINSTORE 3D K1 was manufactured in 2014. It operates on a 400 V power supply. With approximately 1,700 hours of axis movement, this CNC wood machining centre is designed for precision and efficiency. If you are looking to get high-quality wood machining capabilities, consider the BIESSE Rover A FT 2243 machine we have for sale. Contact us for further details. Technical Data • Working Table Dimensions: 4,300 × 2,205 mm • Maximum X-Axis Speed: 80 m/min • Maximum Y-Axis Speed: 60 m/min • Maximum Z-Axis Speed: 20 m/min • Z-Axis Travel (3-/4-Axis Version): 325 mm • Z-Axis Travel (5-Axis Version): 430 mm • Maximum Workpiece Clearance in Z: 170 mm • Maximum Workpiece Clearance with Sweeping Arm: 120 mm • X-/Y-Axis Drive: Rack and Pinion • Z-Axis Drive: Ball Screw • Axis Guides: Linear Guides with Recirculating Ball Bearing Blocks • Vacuum Pump Capacity: 300 m³/h at 50 Hz • Vacuum System: 20 Independent CNC-Controlled Zones • Working Fields: 2 • Clamping Areas: 2 in X • Pneumatic Stops: 16 • Grid Table Pitch: 30 mm • Vacuum Module Dimensions: 132 × 146 mm • Vacuum Module Height: 29 mm • Vacuum Module Rotation Increment: 15° • Air Cushion Table Blower: Yes • Maximum Single Panel Thickness: 50 mm • Minimum Single Panel Thickness: 9 mm • Maximum Multiple-Panel Loading Thickness: 20 mm • Maximum Multiple-Panel Unloading Thickness: 60 mm • Protective Board Thickness: 8–25 mm • Maximum Panel Weight: 200 kg • Minimum Loadable Panel Size in Y: 800 mm • Unloading Conveyor Length: 4,800 mm • Maximum Unloadable Panel Length: 4,300 mm 5-Axis Machining Unit • Number of Axes: 5 Interpolating Axes • Tool Interface: HSK F63 • Cooling: Liquid-Cooled • Power S1: 11 kW / 15 HP at 12,000 rpm • Power S6: 13 kW / 17.4 HP at 12,000 rpm • Maximum Spindle Speed: 20,000 rpm • C-Axis Rotation: 360° Continuous • C-Axis Speed: 12.4 rpm • B-Axis Positioning Range: ±100° • B-Axis Speed: 12.4 rpm • Spindle Bearings: Ceramic • Drive Motor: Brushless, Digitally Controlled • Gearbox: Harmonic Reduction Gear • Lubrication: Lifetime Lubrication Drilling Head • Type: BH 26 2L • Maximum Number of Tools: 26 • Vertical Drilling Spindles: 16 • Vertical Spindle Arrangement: 8 in X / 8 in Y • Vertical Spindle Pitch: 32 mm • Horizontal Drilling Spindles: 4 with Double Output • Horizontal Spindle Axis Distance: 32 mm • Grooving Saws: 2 • Grooving Saw Directions: X / Y Crodpjzuygqofx Ab Deg • Grooving Saw Diameter: 120 mm • Maximum Grooving Depth: 25 mm • Motor Power: 1.7 kW at 2,800 rpm / 3 kW at 6,000 rpm • Maximum Drilling Speed: 6,000 rpm Tool Magazine • Type: Turret Tool Magazine • Capacity: 16 Tools • Tool Position Spacing: 114 mm • Maximum Tool Diameter with Full Magazine: 110 mm • Maximum Individual Tool Weight: 7.5 kg • Maximum Total Tool Weight: 55 kg Automatic Loading / Unloading • Loading Direction: Front • Material Flow: Right to Left • Loading / Unloading System: Type B • Suction Cups: 5 • Automatic Loading Capacity: Up to 3 Panels • Sweeping Arm: Yes • Automatic Table Cleaning: Yes • Loading Table: Automatic X/Y Alignment • Unloading Conveyor: Motorized • Conveyor Control: CNC-Controlled • Conveyor End Detection: Photocell WINSTORE 3D • System: WINSTORE 3D K1 • System Length: 16,000 mm • Beam Length: 8,000 mm • Additional Modules: 3,000 / 6,000 / 8,000 mm • Maximum Suction Frame Length: 5,200 mm • Cross Conveyors: Belt Type, 5,200 mm • Panel Handling: Raw and Thin Panels • Panel Weight Detection: Load Cell