Used Battenfeld Single-Screw Extruder for sale (13,636)

Condition: good (used), Year of construction: 2002, operating hours: 39,000 h, overall weight: 532 kg, total length: 1,285 mm, total width: 920 mm, total height: 1,050 mm, power: 18.5 kW (25.15 HP), volume flow: 156.6 m³/h, pressure (max.): 10 bar, noise level: 68 dB, Equipment: documentation/manual, type plate available, Very well-maintained Ingersoll Rand screw compressor, in excellent technical and visual condition. Fully serviced and ready for immediate use. New hour meter installed. 18.5 kW, 2.61 m³/min, 10 Bar. Ljdpfx Asztl Udjnxsag

Condition: used, Year of construction: 2021, MEGA 300 TS Numerical Control Panel height 60 mm PVC/Abs mm 3 Feed speed up to 22 m/min Working height adjustable electronically by C.N. Motorized rubber belt with higher pressure Introduction system for small panels Panel support guide with electronic adjustment by C.N. Side roller conveyor with idle wheels for panel support Anti-adhesive group Laedpfx Ajt Hal Djnxog Rectifier unit with two motors electronically adjustable by C.N. Roll holder plate for delicate edges Edge magazine with 2 positions Gluing unit for EVA glue with glue tank and pre-melter Edge pressure group on straight profiles with pressure rollers electronically adjustable by C.N Non-stick group Trimming unit with 2 motors with automatic inclination adjustment Trimming unit with 2 superimposed motors Trimming / gleaning group with 2 tilting motors electronically adjustable by C.N. Rounding unit with 4 motors Edge scraper unit electronically adjustable by C.N. Glue scraper unit Oscillating brush group Hairdryer group

Condition: used, Year of construction: 2004, PLC control Panel height mm 10-60 Solid mm 15 Ledsu Tyx Aopfx Anxoag Pvc / Abs mm 3 Feed speed up to mt/min 12-18 Working height adjustable by PLC Adjustable panel support guide Side roller conveyor with idle wheels for panel support Rightening unit Roll holder plate Gluing unit for EVA glue with pre-melter Edge pressure unit End trimming unit Trimming unit with overlapping motors Tiltable chamfering unit Rounding unit with 4 motors Edge scraper unit Glue scraper unit Oscillating brush unit

Condition: excellent (used), Year of construction: 2008, ATLAS COPCO GA90VSDFF screw compressor, equipped with a frequency converter and air dryer, recently serviced. Technical data: capacity: 17.070 m3/min; 90 kW motor; Ljdpfx Anjzzbyfoxsag maximum pressure: 12.8 bar; operating hours: 13435 h; year: 2008. Price: 48,500 net Price: 59,655 gross The compressor is in full working order, ready for operation, and comes with a warranty. We also provide service support.

Condition: used, Screw for PowerGrind 280 Lasdpfxezzciue Anxjg

Condition: used, TECHNICAL DETAILS - Maximum workpiece diameter : 4 [mm] - Travel : 24 [mm] WEIGHT & DIMENSIONS - Machine floor space : 1580 x 1100 [mm] - Machine height : 1505 [mm] Lodpfxozzfk Ie Anxoag - Machine weight : 800 [kg]

Condition: used, Year of construction: 2005, operating hours: 15,000 h, functionality: fully functional, machine/vehicle number: 8031-010, overall weight: 1,500 kg, rotor diameter: 250 mm, number of blades: 20, total length: 2,150 mm, total height: 1,315 mm, total width: 1,515 mm, rotor width: 800 mm, power: 11 kW (14.96 HP), type of input current: three-phase, feed length X-axis: 800 mm, warranty duration: 1 months, input voltage: 400 V, This VECOPLAN VAZ 100/80 U was built in 2005 and is in very good technical condition. Currently disconnected but fully functional. Plug & Play with a 32-ampere plug. Ideal for shredding wood. Various wear parts are available. Ljdpfjzzcfcsx Anxeag Please contact us for more information.

Condition: used, color: other, Year of construction: 2007, operating hours: 6,500 h, GVW: 12.700 kg Make of engine: Duetz CE mark: yes Serial number: 101582511260 Machines for Sale! Browse our website for a variety of machines ready for purchase. We have more options than what you see online, so feel free to call or email us anytime. All our machines are fully maintained and checked for reliability. Need pictures? Just contact us, and we'll share them promptly.   Lodpfxoy R Uwrj Anxjag We're here to assist you in Dutch, English, French, German, Spanish and Russian. Discover our wide range of reliable machines.

Condition: used, turning diameter 1.600 mm max. swing diameter 1.700 mm control SIEMENS - 840 D faceplate turning speed range 1 - 320 U/min rapid traverse 3.000 mm / min feed range 1 - 3.000 mm/min size of pallet 1.168 mm Ledpfx Ajvp Shgsnxeag numbers of pallets 2 main drive 55 kW Vertical turret lathe with cnc | SCHIESS MOWEG - BERTHIEZ TFM 125 has been overhauled by SCHIESS MOWEG (RETROFIT) in 2007. The machine video from the production plant will be shared on request. The machine is in very good condition and was in operation at an aviation company until recently. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TFM125 | TFM-125

Condition: used, Year of construction: 2005, feed pressure 10 bar liter capacity 2,66 m³ / min total power requirement 18,5 kW motor speeds: 3000 min/1 dimensions 1200 x 900 x 1200 mm weight of the machine ca. 150 kg Lodevuz Rhepfx Anxeag

Condition: used, Pressing screw REG-MAC for drying films and fibers, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw Lasdpozy Hhlofx Anxog

Condition: used, Machine: Screw conveyor, hollow screw Type: Hollow screw conveyor, supported on both sides Lodpjrmix Tjfx Anxeag Length: 9.60 m Ø auger: 350 mm Item no. 2024-1302-1

Condition: used, DOUBLE AUGER, SCREW CONVEYOR, 7.20 M Length: 7.20 m Ø auger: 350 mm Weight: approx. 650 kg Material: Housing / cover > galvanized steel / screw > mild steel Laodorn T H Sjpfx Anxeg

Condition: new, Year of construction: 2025, Screw Conveyor system for powder and very small granule products. Stainless steel housing with stainless steel tube. Motor mounted at bottom of machine with screw feeding device. Infeed hopper with 200 liter volume and vibrating motor to assure product flow. - Specification: capacity: up to 3 m³/h depending on product, suitable to dose up to 5kg/filling; discharge height: ca. 1.850m; standard angle: 45°; diameter of pipe: 114mm; power: 380V, 0.81kW; machine dimensions: size is depending on final customized system (hopper, conveyor length and angle can be customized - also optional: mixing device); weight: ca. 130kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Lajdpfx Anev Nk Apsxjg

Year of construction: 1997, condition: used, feed pressure 10 bar liter capacity 1400 m³ / min dimensions 700 x 550 x 1100 mm total power requirement 11 kW Lajdpfjqvcldsx Anxog weight of the machine ca. 275 kg

Condition: new, Year of construction: 2025, Conveyor system for powder products. Stainless steel housing with stainless steel tube. Motor mounted at bottom of machine with screw feeding device. Infeed hopper with 230 liter volume. Capacity 3 to 5 m³/h depending on product. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Lasdpfx Aov Nmnnjnxeg

Condition: used, Year of construction: 1995, operating hours: 40,000 h, machine/vehicle number: IntNr231497, For sale is a well-maintained and operational CNC precision lathe, model Weiler UD 24, manufactured in 1995. Technical data: Lsdpfozzpzkjx Anxjag Control system: Siemens Sinumerik 810T Swing over bed: 240 mm Maximum turning diameter: 120 mm Spindle bore: 42 mm Speed range: up to 6,000 rpm Tool turret: 12-station VDI 20 Bar feed: IRCO single bar feeder Equipment & accessories: C-axis: For drilling and milling operations (radial/axial). Loading system: IRCO short bar loader for efficient material supply. Cooling system: Complete coolant system. Full protective guard with safety interlock. Operating and maintenance manuals available. The machine can be inspected under power by appointment. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: good (used), Year of construction: 2014, operating hours: 18,520 h, Single-shaft shredder, especially suitable for secondary shredding and granulation of pre-shredded material. Application: Commercial waste for thermal or material recovery, e.g. paper, cardboard, plastics and foams, rubber, leather, textiles, floor coverings, etc. Lindner Power Komet 1800 Year of manufacture: 2014 Control cabinet; complete with ABB frequency converter, Recooler Operator panel Hopper Drive motors: 200 kW Hydraulic unit: complete Total weight approx. 21 t Ledswxmb Espfx Anxoag Dimensions approx. LxWxH mm: 5000 x 2800 x 3000 mm Inspection: possible upon arrangement. Delivery time: immediate.

Condition: new, Made in Italy Machine manufactured according to DIN 8606 Maximum turning height: 260 mm Turning diameter over bed: 520 mm Lodpfx Anjdvm Eujxeag Turning diameter over slide: 300 mm Distance between centers: 1,500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8" Spindle speeds: (24) 9 - 1600 rpm (Option 11 - 2000 rpm) Motor power: 5.5 kW (Option: 7.5 kW) Feed rate, Z-axis: (93) 0.028 - 6.43 mm/rev Feed rate, X-axis: (93) 0.012 - 2.73 mm/rev Threads, metric: (54) 0.5 - 224 mm Threads, Whitworth: (55) 72 - 1/8 TPI Threads, module: (54) 0.5 - 112 mm Threads, diametral pitch: (54) 64 - 1/4 D.P. Cross slide, WxL: 650 x 230 mm Cross slide travel: 340 mm Top slide, WxL: 350 x 150 mm Top slide travel: 150 mm Tailstock spindle diameter: 85 mm Tailstock spindle travel: 200 mm Tailstock taper: MK 5 Weight: approx. 3,100 kg Equipment: - Tailstock movement with pneumatic assistance - Acceptance test report according to DIN 8605, lathe with increased accuracy - Mechanical dual clutch - Electromagnetic brake - Rapid traverse for X and Z axes - Electrical equipment made of high-quality brand components, e.g. Siemens/Schneider - Lubrication of guide rails via hand pump - Reducing sleeve - 2 fixed centers - All safety devices according to CE standards: Chuck guard with plexiglass pane, secured with microswitches. Tool holder guard with plexiglass pane. Rear splash guard over the entire length. Lead screw and feed screw protection by means of a light curtain (integrated into the emergency stop circuit). Emergency stop button. - Chip tray on wheels - Electric coolant system - Fixed steady rest - Follower steady rest - Operating tools, acceptance test report according to DIN, operating and maintenance manual, complete electrical installation, machine manufactured according to the latest CE standard

Condition: used, Year of construction: 2000, Manufacturer: FIMER, type T/6-V.A. Year of constr. 2000 6 capping heads. for 28 MCA amount of capping heads: 6 working direction: right-left (CCW) Technical data: Ledpfx Anoz Abk Tsxjag working direction: right-left number of heads: 6 capacity bph max.: 12000

Condition: used, Year of construction: 2003, Single-sided edge trimming and gluing machine Manufacturer: IMA Type: AVM/K/I/G80/822/S3R3L20 Year of manufacture: 2003 For milling, edge gluing, and finishing for a standard groove - only for pre-shaped/pre-grooved doors and square-edged doors Left-hand machine (fixed stop on the left). Complete processing in 3 passes 1st pass: Processing of the top surface of the door (transverse processing) 2nd pass: Door long edge 3rd pass: Door long edge During the 2nd and 3rd passes, the protruding transverse edge from the 1st pass is milled off by using a co-rotating/counter-rotating milling process. Double groove gluing is only possible through modifications to the machine and subsequent manual finishing of the edge. Max. door thickness: - Straight edge: approx. 70 mm - Groove gluing: approx. 60 mm Stable machine frame as a support for aggregates and housing for electrical installation. Drive for feed speeds of approx. 5-25 m/min., mechanically infinitely adjustable. (not to be confused with processing speed) Continuous, plastic-coated strip-type conveyor chain, approx. 80 mm wide, with automatic central lubrication. Manually height-adjustable top pressure with a V-belt 80 mm wide and spring-loaded, ball-bearing guide rollers. Ljdpfszuykvsx Anxeag Machine length approx. 10,900 mm Infeed table at the machine inlet. 1 horizontal, manually adjustable, unheated stop bar 1 joiner milling unit controllable, not swiveling, without sensing with 2 motors, each 3 kW Gluing unit for optional operation of straight edge or softforming gluing, by changing the glue application. Edge material: - Strips: up to 1.3 mm - Roll material: 0.4-3 mm - Solid wood strips: 6 mm Strip length max.: 2550 mm Strip height: 14-80 mm (depending on glue application) with: - Side adjustment by hand for the pneumatically controlled glue application. - Height adjustment by hand -15mm downwards and up to +10mm upwards. 1 bell for the main pressure roller, manually adjustable 1 glue application 0.8L, max. edge height 70mm, straight edge with pneumatic quick-release, Chem-Coat coated, electronic temperature control 1 hot melt glue application 0.8L with quick-release, up to max. 80 mm high edge material, soft edge, Chem-Coat coated, with temperature control and control unit for the strip coating 1 automatic Quickmelt hot melt glue feeder with a heating power of 5.0 kW 1 2-fold magazine only for edge material up to 3.0 mm thick, can be manually attached to the single-roll magazine 1 groove forming pressing unit for pressing the edge material into the groove with: - an activation unit 15 kW for re-activating the edge material for groove forming - a pneumatically controlled forming shoe for the underlapping edge - a pneumatically controlled forming shoe for the entire groove - additional post-pressing rollers for the edge areas in the groove - an electro-pneumatic lateral retraction device for the entire pressing unit 1 horizontal adjustment with mechanical digital display 1 trimming unit for 2 motors mounted on the top pressure for trimming the front and rear edge/strip overhang, for trimming cuts flush or with a bevel. 1 milling unit for 2 motors with height sensing, side sensing, for pre-milling from below and above with 2 motors 1kW, 400V, 200Hz, 12,000 RPM, 30° swiveling 1 milling unit for 2 motors with height sensing, side sensing, for fine milling from below and above with 2 motors 660W, 400V, 200Hz, 12,000 RPM, 30° swiveling Note: The technical data and descriptions are copies of the original order

Condition: used, Year of construction: 2010, - Application of release agent, top/bottom - Joint milling unit - Gluing unit - Trimming unit - Copy milling unit SKF-L - Profile trimming blade unit - Spray cleaning agent - Self-adjusting trimming blade unit - Buffing unit Single-sided edge banding machine Manufacturer: IMA Type: Advantage 310 Year of construction: 2010 Technical data Workpiece - Workpiece length: min. 150 mm - Workpiece width: min. 65* / 150 mm *at a max. workpiece thickness of 25 mm - Workpiece thickness: min. 8 mm, 12 mm with profile trimming blades max. 40 mm (with MFA 08.346), 60 mm (with SKF) - Smallest workpiece: 65 x 300 / 150 x 150 x 19 mm - Machining allowance per workpiece edge: 0 - 5 mm (observe max. chip cross-section) - Workpiece shape: right-angled - Material: chipboard, MDF - Surface material: direct coating (melamine resin paper), paper, film, veneer Edge material - Roll material without film: Paper edges & plastic edges: 0.3 - 3.0 mm Veneer edges: 0.5 - 3.0 mm - max. edge cross-section: 150 - 180 mm² - Cut edge strips: Strips: 3.0 - 8.0 mm - max. strip cross-section: 520 mm² - Edge height: min. 12 mm, max. 65 mm - max. upper edge overhang: 2 mm - Edge profiles Paper edge: approx. 0.4 mm, chamfer 15 Plastic edge up to 3.0 mm, radius depending on the tool Strip up to 8 mm flush milling (with interchangeable motor on MFA) Machine - Constant workpiece projection from the chain track: 35 mm + edge thickness - max. trimming cross-section 520 mm² - Throughput width: min. 65 mm (with projection of 35 mm) - min. workpiece length in feed direction: 150 mm - Overall height (top edge of chain track): 940 mm - Unit side: on the left in feed direction - Pneumatic connection: approx. 7 - 8 bar Application of release agent, top/bottom Joint milling unit 08.379 and blowing nozzle - with 2 motors, each 4 kW, 9000 RPM, 150 Hz Gluing unit 283.1513 with oil bath gearbox - Adhesive output 0.8 l, 60 mm high, with quick-lock system - can be used for hot melt adhesive or PU adhesive - with single roll / strip magazine, roll diameter 800 mm - with 3 main pressure rollers and 3 counter pressure rollers Trimming unit 08.415 - pneumatically swiveling to 0 or 8 degrees - with 2 motors 660 kW, 400 V, 200 Hz, 12000 RPM - 2 HM trimming saw blades 160 x 3.5 x 22, Z=36 Laodezuyp Ejpfx Anxog Copy milling unit SKF-L - with 2 motors 180 W, 400 V, 200 Hz, 12000 RPM - and 2 motors 400 W, 400 V, 200 Hz, 12000 RPM - 1 set of DP profile milling cutter I 80x12xHSK25-R, Z = 4, with HSK25 shank - Profile length in the feed direction: max. approx. 50 mm - Workpiece thickness: max. 60 mm - Working speed: max. approx. 20 m/min - Distance between 2 workpieces: min. approx. 400 mm - min. workpiece projection = 35 mm + profile depth Profile trimming blade unit 08.519 - For finishing a top and bottom milled quarter-circle profile Spray cleaning agent Self-adjusting trimming blade unit 08.521 - for removing hot melt adhesive residue from the edge area of the top and bottom of the workpiece Buffing unit 08.617-2 - with an upper and lower motor: 180 W, 50 Hz, 1400 RPM - 2 polishing pads 50 x 160 x 19 mm

Condition: like new (used), Year of construction: 2006, functionality: fully functional, Progressive Press SACMA SP260 5 Dies – Like new – Perfect working condition Available for any test at HBR srl. Completely overhauled Technical information: Number of dies: 5 Heading tonnage: 800 kN Max cutoff diameter at 500N/mm²: 11.5 mm Max cutoff length: 85 mm Max kickout stroke (die): 65 mm Max kickout stroke (punch): 20 mm Speed: 275 pcs/min Power of main motor: 30 kW Ljdpfjwar Efox Anxoag Die diameter: 54 mm Die length: 90 mm Punch diameter: 45 mm Net weight: 11,300 kg Gross weight: 13,000 kg We look forward to welcoming you at HBR srl in Calolziocorte (LC)

Year of construction: 2006, condition: used, No. 10036 Screw conveyor with feed hopper Van Beek KS250 Lsdpjzltwqofx Anxjag Used, year of construction 2006 According to our customer / the previous owner, the machine is fully functional and can be viewed on site Stationary screw conveyor with feed hopper / dosing hopper / storage hopper for the controlled discharge and onward conveying of lightweight bulk materials and piece goods Hopper volume approx. 2 m3 Conveying capacity approx. 2 m3/h Screw diameter approx. 248 mm Screw pitch approx. 250 mm Screw speed approx. 10 rpm Labyrinth seal Motor power 3 kW Protection rating IP54 Chain drive Transport dimensions approx. 2800 x 1500 x 2125 mm LWH Weight approx. 1500 kg Sale on behalf of customer, ex location near 69123 Heidelberg, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location

Condition: used, Year of construction: 2005, operating hours: 43,152 h, functionality: fully functional, machine/vehicle number: API570324, overall weight: 1,076 kg, total length: 1,700 mm, total width: 900 mm, total height: 1,600 mm, space requirement length: 2,700 mm, space requirement width: 1,900 mm, space requirement height: 2,100 mm, power: 37 kW (50.31 HP), fuel type: electric, volume flow: 406.8 m³/h, operating pressure: 13 bar, pressure (max.): 13 bar, Equipment: documentation/manual, refrigerant dryer, type plate available, Complete industrial compressed-air package comprising an Atlas Copco GA37 VSD 37kW variable-speed rotary screw compressor together with a 2018 Hi-Line Tundra 300 refrigerated air dryer. The variable-speed drive automatically adjusts compressor output according to air demand, making this an efficient solution for industrial applications with varying compressed-air requirements. The equipment is surplus to requirements and is available for inspection in Caerphilly, South Wales. The system includes a HI-LINE TUNDRA 300 REFRIGERATED AIR DRYER - Model: Tundra 300 - Year: 2018 - Maximum working pressure: 16 bar - 230V single-phase - Power: 1.73kW - Refrigerant: R407C - Serial No: 18M-014875 - Original operating manual included The dryer has been installed alongside the Atlas Copco to provide a complete compressed-air solution. The equipment is surplus to requirements and is available for inspection in Caerphilly, South Wales. Laedjzzpttspfx Anxsg Available for inspection by appointment. Location: Caerphilly, South Wales Buyer to arrange collection/disconnection and transport. Further photographs and operating information available on request.