Used Bear Spr1500 for sale (2,998)

Condition: used, Model: SH75 Serial No: 7076 Capacities: Rotary Table Size: 1000 x 1000mm Maximum Table Load: 2000kg Vertical Traverse: 1000mm Cross Traverse: 1245mm Longitudinal Traverse: 1000mm Spindle Diameter: 75mm Spindle Traverse: 508mm Spindle Speeds: 5.6- 1120 rpm Spindle Taper: 40 int Facing Head Diameter: 508mm Facing Slide Traverse: 180mm Facing Head Speeds: 5.6 – 280rpm Feeds, X, Y & Z: 0.75 – 2500mm/min Feeds, Spindle & Face: 0.25 – 830mm Screw Cutting to Table: 2 – 10mm Pitch, 4 – 16 TPI Motor: 7.5kw Electrics: 415v, 3ph, 50 Cycles Complete with: Screw Cutting, 3 Axis DRO, Steel Telescopic Guards, Operator Safety Guard, Pendent Control, Power Draw Bar, Safety Brake, Facing Head Lock, Spindle Support Bearing, Facing Slide Tool Holder Selection of Spindle Tool Holders, Lovo Light Pgedpfx Ajzrm T Eoazot Approximate Dimensions: 4200 x 2940 x 2950mm Approximate Weight: 10,500kg

Condition: used, total length: 2,705 mm, total width: 1,150 mm, total height: 1,890 mm, The scope of delivery includes: 01x Corlette, used Manufacturer: Koch Load capacity: 600 kg Material color: blue Overall width: approx. 2,705 mm Usable width: approx. 2,620 mm Overall depth: approx. 1,150 mm Usable depth: approx. 1,125 mm Overall height: approx. 1,890 mm Usable height: approx. 1,685 mm Loading height: approx. 210 mm Ground clearance: approx. 145 mm Shelf runners: included, 2 pieces Pjdpfszu I Nmex Aazsgt Chipboard thickness: approx. 15 mm Pipe diameter: 35|22 mm Swivel caster diameter: approx. 105 mm Caster width: 35 mm Caster material: plastic Weight: approx. 109 kg 02x Crossbars, used (removable) Material color: blue Overall width: 2,700 mm Profile dimensions: H: 40 x 30 mm Bearing surface: approx. 35 mm Note: As this is a used item, damage or signs of rust may be present. General information about the item: This item is offered for pickup only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: used, Roundo PS340 3000 mm Hydraulic Double-Pinch Plate Bending Rolls Manufacturer: Roundo AB Model: PS340 Year: 1983 Country of manufacture: Sweden Type: Hydraulic three-roll double-pinch plate bending rolls Capacity Maximum working length: 3,000 mm Pre-bending capacity: approximately 12 mm mild steel aximum rolling capacity: approximately 18–23 mm mild steel, depending upon finished diameter Standard upper-roll diameter: 340 mm Plate capacities based upon mild steel of approximately 270 N/mm² yield strength Minimum rolling diameter: approximately 1.1–1.4 times the upper-roll diameter, depending upon material thickness Remaining straight edge after pre-bending: approximately 1.5–2 times plate thickness Features Hydraulic double-pinch design Both lower rolls independently hydraulically adjustable Pre-bending of both ends without removing and reversing the plate Pgsdpfx Ajzuzpysazet Hydraulic rotation of all three rolls Infinitely variable rolling speed Hydraulic powered drop end Portable pendant control Front safety trip bar Heavy-duty fabricated and stress-relieved frame Forged and crowned steel rolls Rolls mounted in heavy-duty roller bearings Suitable for cylindrical and conical bending Approximate machine weight: 14,000–15,000 kg, subject to confirmation Approximate main motor: 22 kW, subject to data-plate confirmation

Condition: used, Lumsden 93 ML Vertical Spindle Rotary Surface Grinder, fitted with 60 inch dia magnetic chuck. Available for immediate supply. Full rebuild, all new Bearings, feed unit rebuilt, new main motor, drive belts, new H/D coolant tray, new panel inc electronic mag unit, Pilz 2 Channel safety switch circuit, door interlocks with motor rundown sensor incorporated, new oil/grease pipework. Psdpfozlkd Usx Aazegt

Condition: good (used), Year of construction: 2002, Control: Siemens Sinumerik 840D Center distance max.: 5000 mm Swing diameter over bed max.: 890 mm Turning diameter max.: 820 mm Pedpfszv Hw Sox Aazsgt Spindle bore: 122 mm Spindle diameter in front bearing: 240 mm Spindle nose: A15 / DIN 55026 Main drive power: 80 kW (100% ED) / 105 kW (40% ED) Number of axes: 4 (X, Y, Z, C)C-axis: yes, max. torque 5000 Nm Tool system: Vert./Hor. head, Capto C8 (Sandvik) Milling spindle: 28 kW / 267 Nm (100% ED) Tool magazine: 100 positions, max. tool length 650 mm Travel X: -10 / +490 mm Travel Y: -130 / +300 mm Travel Z: +180 / +5038 mm Rapid traverse X / Z: 15 m/min, Y: 10 m/min Tailstock: yes, quill diameter 160 mm, taper MK 6 2 steady rests (one of them programmable) Chip conveyor and paper belt filter system Dimensions approx. (L x W x H): 16000 x 4900 x 3300 mm Weight approx.: 35.000 kg

Condition: good (used), Year of construction: 2014, operating hours: 23,500 h, functionality: fully functional, machine/vehicle number: P14ZYG488, Year 2014 with Fanuc series 31i Model B5 X/Y/Z: 500 x 400 x 330 mm 21-tool magazine with 4th axis TECHNICAL SPECIFICATIONS Table dimensions: 650 x 400 mm Maximum table load: 300 kg T-slots (3 slots, distance 125 mm): 14 mm X/Y/Z travels: 500 / 400 / 330 mm Table – spindle nose distance: 250 – 580 mm (with 100mm riser) Spindle axis – Z-axis guide distance: 380 mm Table height: 735 mm SPINDLE Spindle nose: 55 mm ISO 30 Spindle speed (standard): 100 to 10000 min-1 (opt. 24000 min-1) Acceleration time from 0 to 15000 min-1: 0.46 sec Time for reversal at 4000 min-1: 0.40 sec Maximum spindle torque (-1700 min-1): 78 Nm Continuous power: 3.7 kW (2800 – 8000 min-1) Power for 1 minute ED: 13 kW (1700-3500 min-1) Drilling capacity in steel: Ø 20 mm Milling capacity in steel: 70 cm3/min Tapping capacity in steel: M 12 Z-AXIS Ball bearing guide Pgsdpfx Aozzxk Ueazjt Cutting feed (AC servomotor 1.0 kW / Nm): 1 to 30000 mm/min Rapid traverse in X, Y, and Z: 54 m/min Rapid traverse: more than 1.5G TOOL MAGAZINE Tool type: ISO 30 according to DIN 69871A or BT30 Number of tools: 21 Tool change time: 0.8 sec. 2kg / 1.2 sec. 3 kg Chip-to-chip tool change time: 1.4 sec. Maximum tool diameter: 80 mm for maximum tool length 250mm Maximum tool weight: 2kg / 3kg at reduced speed Maximum weight of the 21 tools: 22 kg or 33 kg MACHINE TABLE / X-Y AXES Ball bearing guides New high-speed Fanuc alpha i motors AC servomotor 8i 2.5kW, 8Nm Rapid traverse in X and Y: 54 m/min on 30 mm Cutting feed: 1 – 30'000 mm/min Minimum input/output increment: 0.001 mm Positioning accuracy in X/Y/Z axis: ±0.002 mm FANUC 31i-B5 NUMERICAL CONTROL: 3 axes (option for 4th and 5th axis) Simultaneous linear interpolation up to 5 axes Work time per block: 15 sec. Memory capacity: 200 programs (512 KB) RS 232C and USB interface, Ethernet interface Flashrom card reader with editing functions Manual Guide i with assistance CONNECTION Voltage: (3 phases) 400V ±5% Frequency: 50Hz ±1 Hz Nominal power: 20 kVA Compressed air: 5 bar minimum, 0.13 m3/min Fuse: 34 A min The technical details provided are given without guarantee, subject to error or omission.

Condition: good (used), Year of construction: 2009, functionality: fully functional, Technical details x-travel 4000 mm y-travel 1350 mm z-travel (Vert.) 1600 mm Control Heidenhain iTNC 530 table surface area 4200 x 1150 mm table load 13 t tool taper ISO 50 spindle turning speed - stepless 0 - 3000 U/min transmission ratio 2 spindle motor 28/38 kW feed range 5000 mm/min rapid traverse (X/Y) 12 m/min rapid traverse (Z) 10 m/min weight of the machine ca. 37 t dimensions of the machine ca. 12,9 x 6,53 x 3,79 m Additional information In January and October 2025 the milling head was overhauled (new bevel gears and bearings). Total costs 51.000,- Euro. Working hours (dated 31. July 2025): Machine on: 38.483 h Auto cycle: 12.798 h Spindle hours: 11.645 h A current geometry measurement report is available. * CNC-control HEIDENHAIN iTNC 530 * Electronic handwheel * 50-position tool changer * Controlled universal milling head, indexable 2.5 / 2.5 deg. * Coolant device Psdpfx Aaszzw Niszegt * Cooling through the spindle * 2 chip conveyors * Oil cooler * Measuring probe * Machine documentation

Condition: ready for operation (used), Year of construction: 2009, CNC router manufactured in 2009. This MECANUMERIC Pro 3015 has been very lightly used, with a total operating time of just 1,369 hours. The machine is in very good mechanical condition, although the spindle bearings will need replacement. It is currently connected to power and can be tested until approximately the end of September 2026. If you are looking to get high-quality routing capabilities, consider the MECANUMERIC Pro 3015 machine we have for sale. Contact us for further details. • Usage: very lightly used • Total operating hours: 1,369 h • Mechanical condition: very good • Maintenance note: spindle bearings need to be replaced • Power/test status: currently connected to power and can be tested Podpjz Arwkofx Aazegt • Testing availability: testing expected to be possible until approximately end of September 2026

Condition: like new (used), functionality: fully functional, Year of construction: 2026, container length: 10 ft, overall weight: 10,300 kg, maximum load weight: 9,000 kg, empty load weight: 1,300 kg, loading space volume: 15.8 m³, loading space width: 2,344 mm, loading space length: 2,831 mm, loading space height: 2,376 mm, operating hours: 10 h, machine/vehicle number: 0000, For sale: Like-new 10-foot containers 🇩🇪🚨 These containers have barely been used and are in excellent technical and visual condition, almost as good as new. Condition & Features: ✅ Wind- and waterproof ✅ Robust steel construction ✅ Smooth-running double doors with original locking system Pedpfxswu Unlo Aazogt ✅ High security with heavy-duty door rods ✅ Floor is dry, clean, and highly load-bearing Technical specifications: External dimensions: 2,991 x 2,438 x 2,591 mm (L x W x H) Internal dimensions: approx. 2,831 x 2,352 x 2,390 mm (L x W x H) Volume: approx. 15.9 m³ Tare weight: approx. 1,200 - 1,330 kg We also offer 8-foot containers! Feel free to contact us! Possible uses: Storage container for tools, machinery, or materials Construction sites, businesses, or private use Gardens, courtyards, clubs, or workshops Also ideal as a base for conversions (workshops, storage, tiny house projects) 🚚 Delivery available by arrangement! If you're interested, just get in touch – I reply quickly and reliably. 👍

Condition: good (used), 19 heavy-duty conveyor rollers 238 mm Ø x 600 mm roller shell length with 40 mm Ø shaft and 2 pedestal bearings, with chain wheel 16 B1/Z= 17, 1 geared motor drive with fluid coupling, if required also 6 spiral rollers for right-hand discharge 238/266 mm Ø x 900 mm Pgjdpfx Aewb A Hveazst

Condition: refurbished (used), 1 set = 8 guides suitable for the ESTERER SS 56 or SS 71 gang saw, completely refurbished, i.e. all sliding surfaces re-milled to precise angles. Pedpfxew Eu Ako Aazjgt 1 set of upper guide shoes, bore 110 mm Ø, height 250 mm 1 set of lower guide shoes for bearing 6210 for SS 56

Condition: new, A German built and designed crosscut saw with a facility for the easy cutting of angled or straight components. A unique feature of the machine is that when angle cutting is required the saw unit pivots about a central point thus always maintaining the same cutting length. Although compact in design the machine gives large cutting capacity. Precision ball bearing movement on hardened steel runners. Sturdy cast iron construction with steel base stand. Spring return of sawcarriage. 350mm max. sawblade dia. 2KW brake motor. 30-40mm dia spindle dia. 45 - 90 - 25 degree horizontal movement (swivel) Adjustable upper protection 350mm dia TCT sawblade - 72 teeth. Cutting capacity: 350mm x 135mm deep at 90 degrees. 250mm wide x 135mm deep at 45 degrees (swivel). Dust extraction outlet 100mm Working height of table 900mm Pjdpjdy Hm Eofx Aazegt 'N' model with vertical tilting. 90-45 degrees tilt to left. Max capacity 350mm wide x 92mm deep.

Condition: new, axle configuration: 2 axles, loading space length: 66,000 mm, loading space width: 2,550 mm, suspension: air, tire size: 265/70-19,5, color: black, = Additional Options and Accessories = - LED lighting - Air suspension Pgodpfezqakhjx Aazot = Notes = Internal number for customer inquiries: 2-375 Available immediately !!! SPECIAL PRICE !!! GREATER LOAD VOLUME PAVIC HTA 20 66 ZNL (Twin tires, Low, Light) Short log trailer for wood transport, very low construction, from the ground to the top edge of the platform only 1,250 mm! * 2-axle platform trailer * 4x OPTIPA SL platforms * 8x OPTIPA AL10 aluminum side posts * Loading area length 6,600 mm * Screwable hooks on the loading platforms for securing the load * Permissible total weight 18,000 kg, technically possible 20,000 kg * Payload 14,800 kg, technically possible 16,800 kg * EBS / ABS * Wabco SmartBoard with weighing system * Signal light system for detecting the max. air spring pressure * Air suspension * Safety cables for air suspension * 2 x 10 t SAF OFF ROAD axles * Disc brakes (on request, drum brakes can be supplied upon order) * Air tanks 2x 60 l made of aluminum * Y-drawbar with 40 mm drawbar eye * Steering ring with double ball bearing, permissible axial load max. 20t * Lifting cables at the front and rear * High-quality LED tail lights and position lights * LED work lights * High-quality powder coating - coating including baking process * Twin tires: 265/70 R 19.5 with branded tires Financing possible through our financing partners. For further questions, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors and changes. = Further Information = Axle configuration Tire size: 265/70-19.5 Brakes: Disc brakes Suspension: Air suspension Front axle: Steered Weights Unladen weight: 3,100 kg Payload: 18,000 kg GVW: 20,000 kg Functional Brand of the body: PAVIC short log platform OPTIPA SL Condition Overall condition: very good Technical condition: very good Optical condition: very good

Condition: used, mileage: 177,500 km, power: 155 kW (210.74 HP), first registration: 05/2020, fuel type: diesel, overall weight: 7,200 kg, next inspection (TÜV): 08/2026, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, loading space length: 4,650 mm, loading space width: 2,360 mm, loading space height: 2,100 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Internal vehicle number: 95255A Exterior * 4x2 drive type: rear-wheel drive * 02714 Exterior mirrors electrically adjustable and heated Pgjdpfozcr Udjx Aazet * Long exterior mirrors, suitable for vehicle width of 2350 mm * Tinted windscreen and side windows * 79250 Urea tank (AdBlue): 20 liters * 08640 Fuel tank: 90 liters * Refrigerant compressor 170 cc * 00663 Front mud flaps * 02536 Daytime running lights Interior * 06650 Automatic climate control * 00614 Single passenger seat * 79300 Storage compartment on dashboard with USB port * 72484 Digital tachograph * 77742 A-pillar grab handle * 72619 Steering column (steering wheel) height/length adjustable * 76134 Maintenance indicator Multimedia * 79245 Audio system: digital audio system (DAB) with USB and Bluetooth hands-free system Comfort and Environment * 76128 Automatic transmission - Hi-Matic (8-speed) * Electronic brakeforce distribution * 06356 Speed limiter 90 km/h * 05925 Programmable speed limiter * Audio/telephone controls on steering wheel * 02463 Cruise control * 06536 Central locking with remote control * 06925 Particulate filter * 210EVID Low-emission according to Euro 6d standard * 76747 Comfort dashboard Safety * Brake assist * Immobilizer * Traction control (ASR) * Driver-side airbag * 04488 Electronic Stability Program (ESP) * Anti-lock Braking System (ABS) Other * 77863 Front axle load 2.7 t * 02240 Rear suspension: trapezoidal leaf springs * Front suspension: torsion bar * Twin tires on 2nd/rear axle * 08656 Bodybuilder interface * Model: C-Series * Driver assistance system: Hill Start Assist (AAS) * 72806 Driver assistance system: Advanced Emergency Braking System (AEBS) + City Brake * 72805 Driver assistance system: Lane Departure Warning System proactive (LDWS) * 210 A alternator * 210EVID Engine 3.0 liter – 154 kW diesel * 06628 Cab seating: luxury driver's seat * The vehicle bears customer advertising, which can be neutralized upon request. Miscellaneous: This offer is non-binding. Subject to change and prior sale. If a foreign currency is indicated, it is based on the current daily exchange rate. The valid currency is that of the vehicle location. ----.

Condition: ready for operation (used), Year of construction: 2000, operating hours: 50,796 h, spindle speed (max.): 3,000 rpm, travel distance X-axis: 220 mm, travel distance Z-axis: 840 mm, controller manufacturer: HEIDENHAIN, controller model: MANUAL PLUS M, number of axes: 2, Horizontal turning machine manufactured in . This KERN Status features a maximum turning length of 1,000 mm and a turning diameter over bed of 400 mm. It includes a spindle diameter in the front bearing of 90 mm and a speed range of 0 - 3000 rpm. If you are looking to get high-quality turning capabilities, consider the KERN Status machine we have for sale. Contact us for further details regarding this machine. Pgodpfx Aaezx Snnozst - Working Hours: 50,796 h- Turning Diameter over Bed: 400 mm- Turning Diameter in Gap: 460 mm- Turning Diameter over Slide: 230 mm- Max. Turning Length: mm- Spindle Diameter in Front Bearing: 90 mm- Spindle Bore: 50 mm- Speed Range: 0 - 3000 rpm- Gear Stages: 3- Feed Rates (Longitudinal & Facing): mm/rev- Thread Pitches: - mm/rev- Tailstock Sleeve Diameter: 60 mm- Tailstock Sleeve Stroke: 120 mm- Tailstock Inner Taper: MT4- Tool Holder System: Multifix- Voltage: 380 V- Frequency: 50 Hz- Nominal Current: 30 A- Control Voltage: 24 V- Included Accessories: Röhm 3-jaw chuck (Ø200), Röhm 3-jaw chuck (Ø300), steady rest Technical Specification Counter Spindle No Driven Tools No

Condition: new, Year of construction: 2025, HEBROCK Edge Bander F2 next with SPS control system (incl. touchscreen) and hot-melt glue application to the workpiece for edge material up to 3 mm: pre-milling unit (incl. DIA tool) up to 2 mm milling depth, maintenance-free glue pot with preparation for interchangeable tank incl. glue discharge device, HF cross-cut saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) Podowmdbropfx Aazjgt with separate pneumatic milling adjustment and indexable insert cutter head (combi version), robust chain drive, double roller upper pressure with ball bearings, inspection window on the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. Including: F2/500/10 Whispercut pre-milling head F2/500/20 Combination milling head F2/500/2 Radius cutter R=2mm F2/12 Surface scraper (incl. pneumatic lift)

Condition: ready for operation (used), Year of construction: 2006, operating hours: 38,407 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 650 mm, spindle motor power: 26,000 W, total height: 2,900 mm, total width: 2,500 mm, overall weight: 12,000 kg, controller manufacturer: SIEMENS, controller model: 840 Powerline, product length (max.): 7,855 mm, number of slots in tool magazine: 24, number of axes: 3, This 9-axis Gildemeister TWIN 65 was manufactured in 2006. It features a spindle power of 65 kVA and a maximum spindle speed of 5000 rpm. The machine includes a tool magazine with 24 tools and a turret-type tool changer. With a robust weight of 12,000 kg and dimensions of 7855 mm x 2500 mm x 2900 mm, this horizontal turning machine is equipped with special features like a touch probe and internal coolant supply. If you are looking to get high-quality turning capabilities, consider the Gildemeister TWIN 65 machine we have for sale. Contact us for further details. • 2 units available, identical machine • Machine design: 60° slant bed • Guideways: Roller guideways • Max turning diameter: 250 mm • Max turning diameter (standard): 120 mm • Max turning length: 900 mm • X1 travel (upper slide): 300 mm • Z1 travel (upper slide): 650 mm • Y1 travel (optional): ±40 mm • X2 travel (lower slide): 180 mm • Z2 travel (lower slide): 650 mm • X3 travel (counter spindle): 175 mm • Z3 travel (counter spindle): 670 mm • Main spindle chuck size: 175 / 200 mm • Maximum rod diameter (without reducing tubes): 62 / 65 mm • Spindle bore diameter: 79 mm • Spindle nose diameter: 170 mm • Collet diameter: 66 mm • Front bearing diameter: 120 mm • Main spindle power (40/100% ED): 35 / 25 kW • Main spindle speed range: up to 5000 rpm • Main spindle torque (40/100% ED): 370 / 270 Nm • Spindle drive type: AC motor with integrated spindle motor • C-axis: Integrated for oriented stopping and contouring • C-axis speed: 2000 rpm • C-axis holding torque: 270 Nm • Counter spindle power (40/100% ED): 26 / 21 kW • Counter spindle speed range: up to 5000 rpm • Counter spindle torque (40/100% ED): 290 / 230 Nm • C-axis (counter spindle) speed: 2000 rpm • C-axis (counter spindle) holding torque: 230 Nm • Rapid traverse X/Z (slide 1): 30 / 30 m/min • Feed force X/Z (slide 1): 4.0 / 7.0 kN • Positioning resolution X/Z: 0.0005 mm • Motor torque X/Z: 6 / 10.5 Nm • Motor speed X/Z: 3000 rpm • Ball screw pitch X/Z: 20x32 / 20x40 mm • Rapid traverse X/Y/Z (with Y-axis): 30 / 15 / 30 m/min • Feed force X/Y/Z: 4.0 / 4.0 / 7.0 kN • Positioning resolution X/Y/Z: 0.0005 mm • Motor torque X/Y/Z: 6 / 6 / 10.5 Nm • Motor speed X/Y/Z: 3000 rpm • Ball screw pitch X/Y/Z: 20x32 / 10x32 / 20x40 mm • Rapid traverse X/Z (slide 2): 30 / 30 m/min • Feed force X/Z (slide 2): 4.0 / 7.0 kN • Positioning resolution X/Z (slide 2): 0.0005 mm • Motor torque X/Z (slide 2): 6 / 10.5 Nm • Motor speed X/Z (slide 2): 3000 rpm • Ball screw pitch X/Z (slide 2): 20x32 / 20x40 mm • Rapid traverse X/Z (counter spindle slide): 15 / 30 m/min • Feed force X/Z (counter spindle slide): 4.0 / 7.0 kN • Positioning resolution X/Z (counter spindle): 0.0005 mm • Motor torque X/Z (counter spindle): 10.5 / 10.5 Nm Pedpfxjyvz Ibe Aazsgt • Motor speed X/Z (counter spindle): 3000 rpm • Ball screw pitch X/Z (counter spindle): 10x32 / 20x40 mm • Number of tool stations: 12 • Tool holder: VDI 30 • Tool changer type: Turret • Tool shank size (DIN 69880): 30 / 40 mm • Number of driven tool stations: 12 • Driven tools: all 12 stations capable of driven tools • Driven tool power (40/100% ED): 11.7 / 8.4 kW • Driven tool torque (40/100% ED): 28 / 20 Nm • Driven tool speed: up to 4000 rpm • Tailstock stroke (optional): 300 mm • Tailstock force: 150 / 630 daN • Center size: MK 4 • Hydraulic tank capacity: 20 l • Hydraulic pump power: 2.2 kW • Hydraulic pressure max: 90 bar • Clamping pressure main spindle: 80 bar • Clamping pressure counter spindle: 70 bar

Condition: excellent (used), Year of construction: 2019, operating hours: 29,081 h, functionality: fully functional, CNC control HEIDENHAIN TNC 640, 15" Main computer MC Controller unit CC Keyboard TE 15" TFT color flat screen with softkeys RAM: 4 GB Hard disk: 32 GB, of which at least 21 GB program memory Input resolution / display increment linear axes: up to 0.1 µm Input resolution / display increment rotary axes: up to 0.0001° Input range: max. 99,999.9999 mm or 99,999.9999° Circular interpolation in 3 axes with tilted machining plane Helical interpolation Linear interpolation in 5 axes Block processing time: 0.5 ms Ethernet: 2 x 1000BaseT USB: 1 x front USB 2.0, 4 x rear USB 3.0 Handwheel HEIDENHAIN HR510 Axis selection via buttons / softkeys Buttons for continuous axis movement Emergency stop button Magnetic attachment Enable buttons / dead man's buttons according to CE Travel ranges X-axis / longitudinal axis: 4,000 mm Y-axis / transverse axis: 2,500 mm Z-axis / vertical axis: 1,300 mm Feed / connection / pneumatics Max. feed rate interpolating axes: 40 m/min Installed power: 60 kVA Max. power consumption: 150 A Air requirement pneumatics: 400 Nl/min Working pressure pneumatics: 6 bar Machine table / floor plate Machine table recessed, with leveling units Table size: 2,500 x 4,000 mm Table height: 300 mm Load capacity: 10 t/m² T-slot width: 28 H12 mm T-slot spacing: 250 mm Milling head / universal milling head Universal milling head with continuous movement in 2 axes 5-axis machining Direct drives for rotary axes Rotary axes as interpolated CNC axes Automatic tool clamping Undercut machining up to 10° possible Integrated cooling of the torque motors and spindle bearings C-axis swivel range: +/- 270° A-axis swivel range: +/- 185° Max. speed A/C axes: 30 rpm Working torque A/C axes: 450 Nm Clamping torque axes: 1,400 Nm Positioning accuracy A/C axes: 8 arcsec Positioning repeatability A/C axes: 4 arcsec Main spindle Spindle power S1 / S6: 22 / 33 kW Spindle torque S1 / S6: 84 / 128 Nm Max. spindle speed: 18,000 rpm Constant power: 2,500 - 18,000 rpm Constant torque: 10 - 2,500 rpm Podpfx Aeyrndmjazjgt Tool holder: HSK-A63 DIN 69893 Rigid tapping for electric spindle Software / calibration Dynamic RTCP software AUTOCAL software for automatic calibration 3D Form Inspect M&H software Software for measuring 3D shapes, tools, molds and dies Measurement program creation directly via coordinate points / surface points Vibration / collision monitoring Sensor for detecting vibrations Detection of collisions and excessive vibrations on 3 axes Reaction time approx. 1 ms Electronic interface for functional testing Tool changer Tool changer with arm for tool changes Overlapped-wheel design Full enclosure for operator safety Tool positions: 80 Max. tool diameter: 75 mm Max. tool diameter with free adjacent positions: 125 mm Max. tool weight: 10 kg Max. tool length: 600 mm for 40 tools Max. tool length: 250 mm for 40 tools Tool type: HSK-A63 DIN 69893

Year of construction: 2025, condition: used, M.S.K. / Tryma OMRM 133 Sawing Machine + TM-127 Copying Router (Set of 2 machines, 2025) We offer this complete set of two virtually new machines for processing aluminum and PVC profiles (Year of manufacture: 2025). The machines can be purchased together as a set or individually. Psdpey Encwsfx Aazegt 1. M.S.K. / Tryma OMRM 133 (TM-133) Automatic 2-Head Sawing Machine - Asking price for individual sale: €31,500 excl. VAT (New value: €37,420 excl. VAT) - Specifications: Year of manufacture: 2025 | Serial number: 25DCM330004 | Power: 6.5 kW | 400 V (50 Hz) | 1220 kg - Suitable for quickly and accurately sawing PVC and aluminum profiles - Equipped with 2 saw blades, diameter 550 mm - Console with industrial PC and integrated label printer - Automatic opening and closing of the safety guards - Horizontal and vertical pneumatic profile clamping - Fixed left head and automatically adjustable right head with roller conveyor - Servo motor guarantees fast movement and precision via linear guides - Pneumatic tilting of heads (90° / 45° inward) + mechanical adjustment for intermediate angles - Sawing length max. 5,000 mm (overlengths up to 7,500 mm possible, min. length 290 mm) - Including central support for support and dust extraction option 2. Tryma TM-127 Manual Copying Router Machine (3 spindles) - Asking price for individual sale: €9,500 excl. VAT (New value: €11,330 excl. VAT) - For quickly and easily routing PVC and aluminum profiles - 3-sided processing without reclamping (1 vertical and 2 horizontal copying heads) - Horizontal and vertical templates with standard operations - Automatic locking of cutting depth via pneumatic clamps - Horizontal and vertical pneumatic pins (4, 6 and 8 mm) - Smooth movement via recirculating ball bearings, shock absorbers and ergonomic handle - Including roller conveyors of 1,500 mm (left and right) and pneumatic cooling spray - Profile height: min. 40 mm / max. 110 mm | Profile width: max. 150 mm If you have any questions, are interested in the complete set or an individual machine, please feel free to send us a message or call us.

Condition: new, SKF S71928 ACD / DBAVQ6485 Angular contact ball bearing set (set = 1 pair), unused in original packaging, 100% functional, scope of delivery as per photos Pgjdpfx Aoz Acy Njazst

Condition: new, SLF angular contact ball bearing, unused in original packaging, 100% functional, scope of delivery as per photos Podpfx Aajz Acztozogt

Condition: new, Timken LM844049 / LM844010 tapered roller bearing, unused in original packaging, 100% functional, scope of delivery as per photos Pgodpfxez Ac Ugs Aazst

Condition: new, SNFA SEB140/NS 7/9CE3 DDL high-precision ceramic roller bearing DEF-STAN 80-34 (1 pair), unused, in sealed original packaging, 100% functional, scope of delivery as per photos Pgjdpfx Aoz Ac Dzoazjt

Condition: new, 1 brand new universal milling head in standard or extended version for retrofitting to conventional, NC, or CNC milling machines or drilling machines of any type, system "HURON", swiveling over 2 levels, every angle adjustable Mounting: ISO 40 Overhang: approx. 360 mm Designed drive power: 10 HP Max. speed: 1,800 rpm Pgodpfx Aodbny Eeazot Weight in standard version: approx. 82 kg Accessories / Special Features: • Manual tool clamping • The main spindle and all shafts and engagements are made of case-hardened and tempered chrome-nickel steel • 2 axes that can rotate relative to each other, allowing every setting angle! System „HURON“ • Tapered engagements are ground according to the „KLINGELNBERG“ system • The roller bearings of the main spindle consist of tapered high-precision rollers • 1 tool clamping screw Delivery time: approx. 12-14 weeks after order receipt Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), mileage: 772,605 km, power: 412 kW (560.16 HP), first registration: 12/2012, fuel type: diesel, tire size: 385/65, axle configuration: 6x2, fuel: diesel, brakes: retarder, gearing type: automatic, number of gears: 16, emission class: euro5, Year of construction: 2012, Equipment: differential lock, retarder, Type 2 Load-bearing floor Weighing lift Steering axle Alcoa Pjdpoygiz Ajfx Aazsgt = Additional information = Transmission: Automatic retarder, 16-speed, automatic Front axle: Tire size: 385/65; Alloy rims; Steering; Tire tread left: 80%; Tire tread right: 80% Rear axle 1: Tire size: 295/80; Twin tires; Differential lock; Alloy rims; Inner left tire tread: 80%; Outer left tire tread: 80%; Inner right tire tread: 80%; Outer right tire tread: 80% Rear axle 2: Tire size: 385/65; Alloy rims; Steering; Tire tread left: 80%; Tire tread right: 80% Body manufacturer: Scania Technical condition: good Visual condition: good Please contact Maarten Busser or Niels Busser for further information.