Used Bernardo Goliath 800 X 3000 for sale (65,885)

Year of construction: 1991, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1991 Specifications Metric US Standard Rolling width Fodpfxjkwcc Ne Ahvegf 3000 mm Rolling thickness 3x toproll Ø 120 mm Rolling thickness 5x toproll Ø 150 mm Rolling thickness prebending 100 mm Top Roll Ø 910 + 820 + 740 mm Bottom Roll Ø 940 mm Side roll Ø 780 mm Number of rolls 4 Rolling speed 2 + 4 Adjustiment lower roll 200 mm/min. Adjustment side rolls 500 mm/min. Number of driven rolls 2 Power 300 kW Dimensions (Estimate) Length 8000 mm Width 5400 mm Height 5400 mm Weight 290000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Share on

Condition: used, Year of construction: 2000, machine/vehicle number: 990101, total length: 6,400 mm, total width: 2,200 mm, total height: 2,300 mm, overall weight: 18,500 kg, Heavy Duty Lathe Seiger SLZ 1200 x 3000with Siemens Sinumerik 810D Cycle Control (Teach-In)The heavy duty lathe Seiger SLZ 1200 x 3000 is equipped with a Siemens Sinumerik 810D cycle control (Teach-In). The machine was most recently used as a faceplate and frontal lathe and therefore operated without a tailstock and without steady rests. However, the machine can still be structurally equipped with appropriate steady rests or a tailstock and used for classic center work.Configuration with AC main drive, large faceplate, hydraulic unit, separate control cabinet, and 2 chip conveyors.Working AreaDistance between centers: 3,000 mmSwing diameter over bed: 1,200 mmSwing diameter over cross slide: 850 mmCross slide travel: 620 mmBed width: 750 mmSpindleSpindl e nose: DIN 55027 size 11Spindle diameter front bearing: 190 mmSpindle bore: 104 mmSpeed range: 5 – 900 min⁻¹Max. torque: 6,000 NmMain DriveDrive power: 37 / 52 kW (100% / 60% duty cycle)FeedX-axi s feed force: 24,000 NZ-axis feed force: 16,000 NRapid traverse X: 7 m/minRapid traverse Z: 4 m/minTool HolderTurning tool cross-section: 40 × 40 mmElectrical DataSupply voltage: 400 VFrequency: 50 HzMax. current consumption: 200 AWorkpiece Weights(Manufacturer specifications for standard configuration)Between centers without steady rest: 5,000 kgBetween centers with 1 steady rest: 6,000 kgBetween centers with 2 steady rests: 7,000 kgFlying in faceplate: 1,800 kgChip Conveyor2 x AME Chip ConveyorsManufacturer: AME GmbH, EmsdettenType: S8 300 Tlg. 63Year of manufacture: 05/2016Not Included:TailstockSteady restsNoteThe machine was most recently used as a faceplate or frontal lathe. Therefore, neither a tailstock nor steady rests are currently available. The machine is particularly suitable for machining large disc, ring, and flange workpieces. A later retrofit for use between centers is fundamentally possible. Turning diameter max.: 850 mm Control: • Siemens Sinumerik 810D Weight approx.: 18,500 kg Dimensions (LxWxH) approx.: 6400 x 2200 x 2300 mm Serial number: 990101 Tip width: 3000 - mm Year of construction: 2,000 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: No Fgsdpozdd E Rofx Ahvof

Condition: used, Year of construction: 2014, KOVOSVIT MAS MULTICUT 630S x 3000 multi-axis turning center for sale. Heavy-duty multitasking machine configured for complete machining of large and complex components. Machine is equipped with milling spindle, lower turret, right spindle/tailstock, automatic tool changer and hydraulic steady rest system. Machine is currently under power and can be inspected in production. Main configuration: MULTICUT 630S x 3000 Siemens SINUMERIK control with SHOPTURN Right spindle / tailstock Milling spindle with high-pressure coolant Automatic tool changer 120 tool positions CAPTO C8 Magazine for 3 boring bars with automatic exchange B-axis prepared for automatic boring bar clamping Hydraulic steady rest K5.1 Ø100–410 mm High-pressure coolant through spindle – 60 bar External coolant system Chip conveyor Automatic door opening Central lubrication Machine status signal lamp Electrical cabinet with air conditioning Prepared for bar feeder USB and Ethernet connection Fsdpfx Ajy U Nacohvsgf Tool measuring probe Viviport spin windows in doors Technical details: CAPTO C8 system Max boring bar length: 500 mm Max boring bar weight: 12 kg Through hole right spindle: Ø127 mm 10,000 rpm spindle option S1/S6 spindle power: 37/47 kW Spindle torque: 140/180 Nm Machine hours: System power on time: 52,270 h Machine power on time: 49,264 h Automatic cycle time: 9,599 h

Condition: new, table length 3000 mm table width 1500 mm table height 200 mm weight of the machine ca. 1,6 t Fodpfegvkc Njx Ahvegf The Professional 750 3000x1500x200 mm table has a diagonal hole arrangement on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N. Grid lines at intervals of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 6x feet basic equipment 650 Article no. 280858.X

Condition: good (used), Year of construction: 2009, 1 used CNC lathe Brand DMT/Kern Type CD 480 x 3000 Year of manufacture 2009 Control Manual Plus 620 Technical specifications: Center height 230 mm Turning diameter over bed 475 mm Center distance 3000 mm Cross travel 255 mm Spindle head DIN 55026/6 Spindle bore 82 mm Fgsdpfx Aheu A Ducevsf Power consumption 30 kW Tool holder turret VDI 40 Equipped with Turret Hinged belt conveyor Complete documentation available! Machine is ready for use and can be tested on-site!

Condition: new, Year of construction: 2026, overall weight: 1,350 kg, Top quality 3D perforated table 3000 x 1500 x 200 mm, 100 mm grid, plate thickness 22 mm, hole diameter 28 mm, Surface-machined, very solid, weight approx. 950 kg With table legs, adjustable in 6 positions Fsdpfx Asx Nihiohvjgf Price is without accessories, surcharge €500 Packed in wooden crate, shipping on request

Condition: like new (used), functionality: fully functional, CMU Shear 3000 x 8/10 Fodpfey R Diwex Ahvogf Model 2E0 6/30 Motorized Backgauge Blade Angle Adjustment Used Machine Internal Code: SER 63

Condition: like new (used), functionality: fully functional, control type: CNC control, LVD BENDER 3000 X 110 CYBELEC CNC Fgedjxf H Rqjpfx Ahvef 3 AXES MOTORIZED REGISTER USED MACHINE INTERNAL CODE: SVR 249

Condition: used, operating hours: 11,562 h, total height: 1,900 mm, total length: 5,600 mm, total width: 2,000 mm, Empty weight: 8.500 kg Price: On request - Documentation available: No - CE certificate present: No - Operating hours: 11562 - Drive system: Conventional - Power [kW]: 30.0 Fjdpfxowp H Efs Ahvsgf - Centre height [mm]: 500 - Swing over bed [mm]: 1000 - Distance between centres [mm]: 3000 - Spindle bore [mm]: 105 - Min. spindle speed [rpm]: 2.24 - Max. spindle speed [rpm]: 450 - Transport dimensions: 5600mm x 2000mm x 1900mm (l x w x h) - Transport weight [kg]: 8500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1991, -1- used deflection roller/drive roller, drum length approx. 1250 mm, drum diameter approx. 800 mm, total shaft length approx. 2000 mm, shaft diameter approx. 123 mm, year not known to us. Both bearings can be turned easily. Price EXW Fodpswqfz Uofx Ahvogf

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, operating hours: 7,240 h, Terex-Pegson 1100×800 (Pegson 1180) Year: 2007 Hours: 7,240 h Well-maintained Terex-Pegson 1100×800 jaw crusher, also known as Pegson 1180. The machine has been operated by a single owner since it was new and remains in very good working condition. Fodezdq Nhspfx Ahvegf Technical specifications: Feed opening: 1100 × 800 mm Hydraulic CSS adjustment: 90–150 mm CAT C13 engine Hopper capacity: 9.1 m³ Grizzly feeder Side conveyor Operating weight: 56,000 kg Additional equipment: Spare jaw plates included Main advantages: Single owner since new Very good technical condition Reliable CAT C13 engine Large feed opening for high productivity Suitable for quarrying, recycling, and aggregate production Fast access to spare parts Financing available. Export documentation can be arranged. Machine available immediately. Inspection possible in Poland. Worldwide delivery available.

Condition: new, Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 420 mm, spindle bore: 103 mm, turning diameter: 660 mm, turning length: 3,000 mm, spindle speed (max.): 1,320 rpm, spindle speed (min.): 9 rpm, spindle motor power: 15,000 W, Equipment: rotational speed infinitely variable, Immediately available. No waiting, start machining right away! Machine: MEXPOL TUB 660 x 3000 mm with stepless speed adjustment via frequency inverter Bed width: 560 mm Distance between centers: 3000 mm Center height: 330 mm Spindle bore: 103 mm Workpiece weight: up to 3000 kg Spindle nose: DIN 55027/11 Speed range: 9 – 1320 rpm Main drive: 15 kW Feed rate: longitudinal feed 0.039–18 mm/rev, cross feed 0.02–9 mm/rev Rapid traverse: longitudinal 3800 mm/min, cross 1900 mm/min Tailstock: Quill diameter 105 mm, Stroke 225 mm, MT6 Thread cutting: metric, inch, module, DP Standard equipment: frequency inverter, quick-change toolpost size C, coolant system, interlocked chuck guard, work light, change gear set, CE conformity Dimensions: 4970 × 1650 × 1500 mm Weight: 4750 kg Fjdpeyr Dmksfx Ahvegf Fixed steady rest (roller jaws) Ø 20–200 mm Fixed steady rest (roller jaws) Ø 180–430 mm Delivery: Immediate from stock (while stocks last)

Condition: used, Guide rail and surface grinding machine WMW FRITZ HECKERT Aschersleben Fgedpfx Aehv A A Dshvsf Type SZ 1000 x 1250 x 3000 / 344 Manufacturer's No. 13.2236.2 Year of manufacture 1989 Nominal grinding area 3000 x 1250 mm Table clamping surface 3240 x 1000 mm Grinding length max. 3300 mm Processing width 1250 mm Processing height 1250 mm Grinding wheel diameter (surface grinding support) max. 600 mm Grinding wheel width (surface grinding support) max. 100 mm Grinding wheel diameter (swiveling support) max. 450 mm Mains connection 400 Volt, 50 Hz - Swiveling grinding support, motor power 16.5 kW, infinitely variable speed - Grinding support for surface grinding, motor power 15 kW, infinitely variable speed - New electrical control system, based on SIEMENS S7, year of manufacture 2001 - New electrical control cabinet located nearby, year of manufacture 2001 - Infinitely variable grinding wheel speed on both grinding supports - Swiveling grinding spindle for guide rail and profile grinding - Control panel swiveling and height-adjustable - Coolant system located nearby - Hydraulic system located nearby - Oil circulation lubrication system located nearby - Various grinding wheels and arbors Space requirement (complete) L x W x H 11900 x 7700 x 4600 mm Weight 45 tons Very good condition

Condition: excellent (used), Year of construction: 2000, Technical specifications: Working length: 3050 mm Distance between columns: 2690 mm Press force: 130 t CNC control: DELEM DA65 2 D graphic Adjustable backgauge Controlled axes: Y1 / Y2; X; R; I CNC table bending compensation: Wila Moducrown Hydr. Tool clamping at the top and bottom Pneumatic tool shifting Number of bending aids: 2 Installation height: 535 mm Stroke: 220 mm Thrust: 410 mm Motor power: 12.5 kW Fsdpfx Aewimvwshvsgf CE mark Dimensions (length x width x height): approx. 3800 x 2350 x 3150 mm Weight: approx. 14 tons Accessories: 1 set of standard tools Condition: Good condition, tools in mint condition The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: good (used), Manufacturer: Takraf / Zemag Type: ZWB 630 x 800 Roll Dia.: 630mm Fgjdpfxjpxn D Ds Ahvef Roll Width: 800mm (Smooth) Included frame and electrical motors.

Condition: new, table length 3000 mm table width 1500 mm table height 200 mm weight of the machine ca. 1,6 t The table Professional Extreme Article no. 7D 3000x1500x200 mm has a diagonal hole arrangement on the table top and a parallel hole arrangement in 50 mm grid on the sides. The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel. The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Fgodjgvkdbjpfx Ahvef Grid lines at intervals of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 6x feet basic equipment 650 Article no. 280858.X

Condition: new, 3000 mm Working width 600 mm Wheel width 600 mm roll diameter 90 mm Fgedpfxeuap S Se Ahvsf number of rolls 12 Stck. work height max. 800 - 950 mm Colour blau / rot weight 200 kg - straight version - stable construction - high load-stable stability - Height-adjustable feet

Condition: new, 3000 mm Working width 600 mm Wheel width 600 mm roll diameter 90 mm number of rolls 12 Stck. work height max. 660 - 815 mm Colour blau / rot weight 200 kg - straight version Fsdstv Rf Ujpfx Ahvegf - stable construction - high load-stable stability - Height-adjustable feet

Condition: new, 3000 mm Working width 400 mm Wheel width 400 mm roll diameter 60 mm Fgsdpsp S Ddfsfx Ahvef number of rolls 12 Stck. work height max. 810 - 910 mm

Condition: new, table length 3000 mm table width 1500 mm table height 200 mm weight of the machine ca. 1,6 t The table Professional Extreme Article no. 4-280040.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel. The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at intervals of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Fgsdegvkc Tspfx Ahvjf Including 6x feet basic equipment 650 Article no. 280858.X

Condition: excellent (used), Year of construction: 1998, sheet thickness steel (max.): 5 mm, Hydraulic swivel bending machine Manufacturer: HOCHSTRATE Type: 3000/5 Year of manufacture: 1998 Technical data Manufacturer: HOCHSTRATE Type: 3000 x 5 Year of manufacture: 1998 Sheet width: 3040 mm Bending capacity: 5 mm (400 N/mm2) Motor power: 7.5 kW Space required: approx. 4.7 x 1.90 x 2.20 m Weight: approx. 6.5 t Equipment Fgodpfx Ahjvrxnxjvof • PLC control • Bending rail 30 mm All information without guarantee. A demonstration is possible at any time in our exhibition hall.

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, SHEARING MACHINE BL 3000 X 3/4 X 200 HYDRAULIC MOTORIZED BACK GAUGE USED MACHINE, IN WORKING ORDER Fgedpezfptbefx Ahvef

Year of construction: 1997, condition: excellent (used), PBR T35SNC x 3000 cycle turning lathe Year of manufacture: 1997 Control system: Fagor Distance between centers: 3000 mm Max. turning diameter: 630 mm Center height above the bed: 300 mm Center height above the cross slide: 165 mm Spindle bore: 105 mm Spindle speed: 2000 rpm Weight: 6200 kg Fodpfx Asil Hzzjhvegf Included accessories: Multifix set (without steel), chuck (see photos) + additional chuck. No guarantee is given for the accuracy, completeness, and up-to-dateness of the information provided.

Condition: new, Stackable galvanized crate with front flap and lid 1000 x 800 x 500 This lockable metal storage crate with lid and half front flap is made from hot-dip galvanized steel (note: the lid is electrolytically galvanized, not hot-dip). This ensures a long service life as rust cannot affect the steel panels of the crate itself. The crate is equipped with four lifting eyes. Thanks to these lifting eyes, the lockable storage bin can easily be moved using a crane (note: this crate is not certified for lifting operations!). Additionally, these crates are very stackable and easy to move with a forklift truck. Specifications for storage crate with lid: Fgedpfx Ahow Nigqevof Capacity: 192 litres 4 lifting eyes (note: this crate is not certified for lifting operations!) Stackable Completely lockable Hot-dip galvanized crate body Electro-galvanized lid

Condition: new, Year of construction: 2025, table length 3000 mm table width 1500 mm table height 200 mm weight 1500 kg Manufacturer: GERD WOLFF Technical Details: • Length 3000 mm • Width 1500 mm • Height 200 mm • Weight 1500 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: Fgjdpfx Ahoymf Rtsvef • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 8 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table