Used Bernardo Ms 75 X 2000 S for sale (101,539)

Condition: used, operating hours: 1,216 h, mileage: 8,947 km, power: 75 kW (101.97 HP), first registration: 07/2020, overall weight: 5,350 kg, fuel type: diesel, color: orange, axle configuration: 4x4, maximum load weight: 1,150 kg, empty load weight: 4,200 kg, wheelbase: 1,900 mm, brakes: other, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, maximum speed: 50 km/h, Equipment: ABS, air conditioning, all wheel drive, cabin, differential lock, immobilizer system, onboard computer, parking sensors, power assisted steering, soot filter, * German vehicle * Documentation and inspection books available * Only 8,947 km original mileage * ONLY 1,216 total operating hours * Condition as shown in photos * DULEVO 2000 * 4 x 4 all-wheel drive * Switchable all-wheel steering * 3-disc brush system at the front, 800 mm wide * Sweeping width: 1,800 mm to 3,000 mm, up to 3,400 mm with third brush * High-pressure cleaner with hose and high-pressure lance at rear * Pre-spray system * Spraying width: 1,120 mm * Debris hopper: 2.38 m³ * Fresh water tank: 463 liters * Hydraulic high-tip emptying, tiltable up to 45° * Ideal for pedestrian, foot, and cycle paths, narrow alleys, etc. * 2-person full comfort cab * Air conditioning * EasyDrive (hydrostatic drive) (SN) * VM 4-cylinder diesel engine * Power: 75 kW / 102 HP * 40 km/h road approval * Heated tinted panoramic windshield * Comfort suspension seats * Rear view camera * Ergonomic arrangement of all controls * Central lubrication system * Rotating warning beacons * Wheelbase: 1,900 mm * GVW: 5,350 kg * Unladen weight: 4,200 kg * Self-propelled road sweeper Bedpjw Emh Sefx Al Asln If you require a new TÜV inspection, we are happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, and without new UVV. You will find additional trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and evaluation of the goods, so that the buyer does not have any misconception about the condition and suitability. Viewing and testing are possible at any time by prior arrangement and are expressly desired. All information provided without guarantee. We accept no liability for mistakes or incorrect information in this offer. The buyer is obligated to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.

Condition: excellent (used), mileage: 145,863 km, power: 302 kW (410.61 HP), first registration: 10/2008, fuel type: diesel, axle configuration: 6x6, wheelbase: 6,200 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro5, number of seats: 2, total length: 8,820 mm, total width: 2,550 mm, Year of construction: 2008, Equipment: crane, Crane Number of hydraulic extensions: 3 Number of support legs: 2 Remote control: ✓ Rotator: ✓ = More information = General information Cab: single Registration number: BV-ND-28 Bedpfxozfa Tre Al Aoln Technical information Number of cylinders: 6 Engine capacity: 12.902 cc Axle configuration Front axle: Steering Rear axle 1: Double wheels Rear axle 2: Double wheels; Steering Weights Empty weight: 16.805 kg Carrying capacity: 17.880 kg GVW: 34.500 kg Max. towing weight: 50.000 kg Functional Crane: PALFINGER E 165 Z, year of manufacture 2008 Maintenance, history and condition APK (MOT): tested until 12/2026 Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, mileage: 93,792 km, power: 265 kW (360.30 HP), first registration: 02/2020, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: blue, gearing type: automatic, emission class: euro6, loading space length: 6,100 mm, loading space width: 2,460 mm, loading space height: 950 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, EURO6, sun visor, all-round lights, work lights, storage compartments, air suspension at the rear, differential lock, automatic transmission, multi-function steering wheel, lane/distance assist, 19,000 kg gross vehicle weight, trailer hitch. Bsdpezwk Dlofx Al Aoln PRE-EQUIPMENT, rear-view camera, engine brake, 93,792 km!!!, foldable crane behind the cab, Fassi F175A.2.24, remote control, oil cooler, hydraulic supports, 4x hydraulic supports for 12m70/1000 kg, option for 3x mechanical supports, option up to 19m25/480 kg, flatbed with resin wood floor, aluminum folding side panels, 6m10 x 2m46 x 0m95. Vehicle in very good condition!!!!

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: DN1729, Technical data: IHF - Ingersoll Rand - Quick Lift QLA 75-S-GM manipulator handling device, lifting aid Payload at full extension 75 kg, at the gripper 25 kg Overall height approx. 3.1 m Bsdpfx Aszv Hw Eel Ajln Reach: approx. 2 + 2 m Lifting height: approx. 0.2 - 1.4 m Total weight approx. 400 kg Swivel range 270° + 90° (via articulated arm), connection to 400V 16A With a pneumatic magnetic gripper (16 magnets), you can pick up or position steel workpieces, thereby automating your process. The crane is disassembled and immediately available. The item is located in 75053 Gondelsheim. Other cranes are available, with load capacities from 80 to 5000 kg; please inquire. See pictures. Shipping by freight forwarder or collection only by prior arrangement.

Condition: like new (used), functionality: fully functional, Ferwood code: RS0003586 - Manufacturer code: CXSM20-75 - Condition: As new (ex-demo item) - Functionality: Fully operational - Compatible machine: - If interested, we offer overhauling service, please contact us. Bedpfx Aloyrn U Ej Ajln 1KG - 20X20X20

Condition: new, sheet thickness: 6bending length: 2550upper roll diameter: 190prebending: 5sheet length: 2550Model MRM-S 3 rollers Motorized asymmetric plate bending machines Steel welded frame - Motorized adjustment of the rear roller Options: Hardened rollers         1.800,- Extended roller shafts:    500,- Role segment:              750,- Digital display:           800,- All prices excluding VAT Bedpoflvl Asfx Al Ajln

Year of construction: 2024, condition: used, For inquiries regarding the crawler, Mr. Herden is available to assist you (by phone). Seppi M. MAX 75 HP / 75 PS / Radio-controlled crawler vehicle / Recovery winch / Seppi M. MICROFORST rc 155 forestry mulcher / Seppi M. H 5 rc 175 mulcher / In stock & immediately available Price for crawler without attachments: €126,190.00 net / €150,166.10 gross Standard specification and features: Dimensions*: - Overall width, undercarriage retracted: 1,650 mm - Overall width, undercarriage extended: 2,450 mm - Depth: 2,600 mm - Height: 1,250 mm - Track length: 1,570 mm - Track width: 230 mm - Cross/longitudinal incline: 55° - Weight (without equipment): 2,200 kg Engine: - Perkins 4-cylinder diesel engine - Output: 55 kW / 75 HP - Torque: 270 Nm at 1,800 rpm - Displacement: 2,200 cc - Cooling with automatic reversing fan (automatic fan cleaning) Drive: Hydraulic system for attachments: - High-flow hydraulic circuit (closed circuit) for attachments (double-acting): - Capacity: 93 l/min max. at 2,750 rpm - Pressure: 380 bar Hydraulic system services: - Low-flow hydraulic circuit for attachments (double-acting): - Capacity: 15 l/min max. at 2,750 rpm - Pressure: 200 bar Vehicle hydraulic system: - Capacity: 154 l/min max. at 2,750 rpm - Max. pressure: 400 bar Undercarriage: - HIGH GRIP: Stability and traction on slopes up to 55° under optimal conditions - Hydraulic adjustment of vehicle width 800 mm (2x400 mm) - AUTO TRACK TENSION: Active automatic track tensioning - Patented track derailment protection - Stability and traction thanks to robust tread and large track contact area Control: - Remote control with graphic display (machine vital data and tilt indicator) - Range: 150 m - Potentiometer for speed control with variable feed from 0 to 100% Lifting gear: - FLOAT: Lifting gear with float position (ground pressure control) Standard equipment: - Vehicle with roll bar - LED headlights - Internal components protected by heavy-duty steel covers - Skid plate to protect the engine and hydraulics - Color: anthracite RAL7021 | red RAL3020 OPT 573 Bio hydraulic oil OPT 221 Rear forestry protection with recovery winch Optional: SEPPI M. MICROFORST rc 155 – hydraulic forestry mulcher Price: €23,130.00 net / €27,524.70 gross Optional: SEPPI M. H5 rc 175 – hydraulic mulcher Price: €13,770.00 net / €16,386.30 gross We have a very large selection of various Seppi M. products in stock and immediately available! Bsdpfx Aoyfrpgsl Ajln Mr. Herden (phone) will be glad to assist you. We are happy to provide you with a financing offer upon request. We are an official Seppi M. sales and service partner. We supply the complete Seppi M. product range! Subject to error and prior sale! Rental possible = Further information = New: Yes For more information, please contact Tobias Ebert.

Condition: good (used), End mill, end mill, cutter, shell cutter Blsdpey A Embofx Al Ajn -Manufacturer: Reishauer, end mill with longitudinal groove, 2 pieces -Type: 75 x 75H Sp 5000 KHSS-E 75x75x27 -Hole: Ø 27 mm -Cutting material: HSS-E -Price/Fee: complete -Transport dimensions: 150/75/H75 mm -Weight: 2.9 kg

Condition: used, mileage: 21,000 km, power: 346 kW (470.43 HP), first registration: 05/2021, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: mechanical, emission class: euro6, total width: 2,550 mm, total height: 3,650 mm, Year of construction: 2021, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Internal number: #129 MAN TGS 28.470 6x2-2 BL Wiedemann SUPER 2000 – available upon request Chassis * MAN * TGS 28.470 * 6x2-2 BL * 4 * 470 HP/346 kW * EURO 6 * Engine D2676LF52 * MAN Tronic transmission control MAN Comfort Shift ZF 16 S 252 OD * N-drive NMV 221 f=0.98 /drive flange 150 mm for NMV 8-hole * 3,900 + 1,350 mm wheelbase * Front suspension: parabolic 9.5t * Rear suspension: air for high center of gravity * 400-liter fuel tank + 60-liter AdBlue tank * 385/55 R 22.5 STEER-AXLE TL 160&K * 315/70 R 22.5 DRIVE-AXLE TL 154/150&K * 385/55 R 22.5 STEER-AXLE TL 160&K * Chassis color RAL 9011 graphite black * Cab color RAL 2004 deep orange * Halogen beacons * “M” cab 2,240 mm wide 1,880 mm long * Air conditioning * MAN Media Navigation Package / video function via USB/SD / 7” color display / MAN Camera View / AUX-in / USB / Comfort hands-free for 2 mobile phones Body * Wiedemann enviro tec * Super 2000 8.0/6.0 water recycling * 14,000-liter tank * 6,000 liters fresh water * 8,000 liters waste water * Discharge by tilting the tank 45° Vacuum System * Wiedemann & Reichhardt KW 3000 * 3,000cbm/h 80kW * Piping galvanized, DN 150 * Approx. 25m suction hose DN 125 * Suction pipe DN 125 with channel spatula * Silencer High-Pressure System * Uraca P3-45 65, 406 liters at 175 bar * Hydraulic high-pressure hose reel with approx. 180m HP hose DN 32 with automatic rewind * Hydraulic high-pressure hose reel with approx. 80m HP hose DN 13 with automatic rewind Additional fresh water system * Speck NP 25/50-150, 50 l/min at 150 bar * Spring-loaded reel with 15m pressure hose DN10 Special features * Sludge tank made of material 1.4301 * Suction and HP boom * 20-liter hand washing unit (heated) * Stainless steel toolbox * Control cabinet with display * Engine – start can be controlled from control cabinet * NMV – start can be controlled from control cabinet * Radio remote control with display * Equipment cabinet with two flaps – access on both sides * Hose tray * High sound insulation of pump compartment * LED worklights Bjdpfxovh H Hhj Al Ajln * Central lubrication system Technical data * Unladen weight 18,500 KG * Permissible GVW 28,000 KG * Length 10,400 mm * Height 3,650 mm * Width 2,550 mm For further detailed information and/or photos, please contact us directly. You will find a wide range of further vehicles available for PURCHASE or RENT on our website: Subject to changes, prior sale, and errors. The buyer is obliged to independently verify the condition and equipment of the goods. Sale exclusively according to our terms and conditions and under exclusion of any warranty.

Condition: used, mileage: 28,000 km, power: 353 kW (479.95 HP), first registration: 05/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 06/2026, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,700 mm, loading space volume: 14 m³, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Internal reference: #349 MAN TGS 26.480 6x2 BL Wiedemann Super 2000 8.0/5.0/1.0 MAN TGS 33.510 6x4 with high-performance Wiedemann Super 2000 water recycling unit (8.0/5.0/1.0). This vehicle is purpose-built for professional sewer cleaning and flushing operations, combining high suction capacity, efficient water recycling, and robust high-pressure technology in a durable and practical configuration. With a 14,000 l tank capacity, 3,000 m³/h vacuum performance, large-diameter DN150 suction pipe, and a powerful Uraca high-pressure system, this unit is ideally equipped for demanding municipal and industrial applications. Extensive control, comfort, and safety features ensure efficient operations even during extended deployments. Superstructure * Wiedemann enviro tec * Super 2000 8.0/5.0/1.0 water recycling system * 14,000-liter tank capacity * 1,000 liters of fresh water * 5,000 liters of flushing water * 8,000 liters of sludge capacity * Tank discharge by 45° tipping Vacuum System * Wiedemann & Reichhardt KW 4000 * 4,000 m³/h * Approx. 25 m suction hose DN 125 High-Pressure System * Uraca P3-45 65 – 413 liters at 175 bar * Approx. 180 m HD hose DN 32 * Hydraulic hose reel with approx. 80 m DN 13 Additional Freshwater System * Speck NP 25/50-150 with 50 l/min at 150 bar * Spring-loaded reel with 10 m pressure hose DN10 Special Features * Sludge tank made from material 1.4301 (stainless steel) * Suction and HD booms * 5-liter warm water hand wash system * Stainless steel toolbox * Operator cabinet with display * Engine start controllable from operator cabinet * NMV start controllable from operator cabinet * Radio remote control with display * Equipment cabinet with two hinged doors – both sides * Hose storage * Pump compartment sound insulation extended * LED work lights * Central lubrication system Technical Data * Unladen weight: 19,030 kg * GVW: 26,000 kg * Length: 9,990 mm Bjdpfxoyg Anpj Al Aeln * Height: 3,700 mm * Width: 2,550 mm Chassis * MAN * TGS 26.480 * 6x2 * 353 kW / 480 HP * EURO 6 * Automatic * Air conditioning * Self-propelled sewer cleaning machine Summary: A highly capable MAN TGS 26.480 6x2 with Wiedemann Super 2000 water recycling system, powerful vacuum and high-pressure technology, and well-designed operator and comfort features. The ideal solution for professional sewer cleaning operators who value efficiency, high performance reserves, and robust technology. For further detailed information and/or photos, please contact us directly. A wide selection of additional vehicles for SALE or RENT can be found at: Specifications, prior sale, and errors excepted. The buyer is obliged to verify the condition and equipment of the goods independently. Sale exclusively in accordance with our terms and conditions and under exclusion of any warranty.

Condition: used, mileage: 10,655 km, power: 375 kW (509.86 HP), first registration: 03/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,650 mm, loading space volume: 14 m³, Year of construction: 2023, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Internal number: #309 MAN TGS 26.470 6x4 BL Wiedemann Super 2000 8.0/5.0/1.0, Chassis: MAN * TGS 26.470 * 6x4 BL * 375 kW / 510 HP * EURO 6 * Automatic transmission * Air conditioning Body: Wiedemann enviro tec * Super 2000 8.0/5.0/1.0 water recycling unit * 14,000 litre tank capacity * 8,000 litre sludge volume * 5,000 litre wash water * 1,000 litre fresh water * Discharge by tilting the tank up to 45° Vacuum system: Wiedemann & Reichhardt KW 4000 * 4,000 cbm/h 106 kW * Galvanized pipeline in DN 150 * Approx. 25 m suction hose DN 125 * Suction pipe DN 125 with duct cleaner * Silencer High pressure system: Uraca P3-45 65 413 litres/min at 175 bar * Approx. 180 m HP hose DN 32 * Hydraulic hose reel with approx. 80 m DN 13 Additional fresh water system: Speck NP 25/50-150 with 50 l/min at 150 bar * Spring-loaded hose reel with 15 m pressure hose DN 10 Special features: Sludge and water tanks made of stainless steel 1.4301 * Suction and HP booms * 20-litre warm water hand washing unit * Stainless steel toolbox * Control cabinet with display * Engine start can be operated from the control cabinet * NMV start can be operated from the control cabinet * Radio remote control with display * Equipment cabinet with two doors – on both sides * Hose storage * Pump chamber noise insulation extended upwards * LED work lights * Central lubrication system Technical data: * Unladen weight approx. 19,120 kg Bledpfx Ajvh H Ifsl Ajn * GVW approx. 26,000 kg * Length approx. 10,100 mm * Height approx. 3,650 mm * Width approx. 2,550 mm For further details and/or pictures, please contact us directly. A wide selection of other vehicles for SALE or RENT can be found at: Subject to changes, prior sale, and errors. The buyer is responsible for verifying the condition and equipment of the goods independently. Sale takes place exclusively under our Terms and Conditions and excludes all warranties.

Condition: used, mileage: 229,812 km, power: 335 kW (455.47 HP), first registration: 03/2009, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 12/2023, color: white, gearing type: semi-automatic, emission class: euro5, total width: 2,550 mm, total height: 3,890 mm, loading space volume: 14 m³, Equipment: ABS, air conditioning, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ BUY ++ Mercedes Actros 3346 K 6x4 Wiedemann Super 2000 8.0/6.0/2.0, water reclaimer superstructure * Wiedemann enviro tec * Super 2000 8.0/6.0/2.0, water recycling * 14,000 liter tank size * 2,000 liters of fresh water * 6,000 liters of rinsing water * 8,000 liters sludge volume * Emptying by tilting the tank 45° Vacuum system * Wiedemann & Reichhardt KW 3000 * approx. 3,000cbm/h * approx. 25m suction hose DN 125 * Suction pipe DN 125 w. Duct folder High pressure system * URACA P3-45 G 65 approx. 406l/min at 175bar * approx. 200m HP hose DN32 * Hydraulic flushing hose reel with approx. 60m DN 13 Special features * Suction and HP boom * 5 liter hand washing device * Stainless steel tool box * Control cabinet without display * Radio remote control with display * Device cabinet with two flaps - on both sides * Hose storage * Sound insulation of the pump compartment raised * Working lights * Central lubrication system Technical data * Unladen weight 18,810 KG * GGW 26,000 KG * Length 10,350 mm * Height 3,890 mm Bljdpfxjvh H Dyj Al Ajn * Width 2,550 mm Special equipment: Axle load front axle 9.0 t, Audio system: CD radio comfort (Bluetooth), Exhaust raised behind cab, Compressed air horn, Cab: Movable cab entrance, Cab: Comfort suspension (1.8 HZ), 16-speed gearbox, Reinforced cooling, Air filter: Construction site vehicle filter, Air filter: Cyclone air filter, Power take-off independent of gearbox, Parameterizable special module, Rotating beacon left/right, Automatic circuit breaker, Sun visor, Stabilizer on 1st rear axle, Socket 12 volt, Stone impact protection grille, Front bumper in steel design, Drum brakes front and rear axle, Oil filter on front and rear axles, Oil filter on rear axle Socket 12 volt, Stone guard, Front bumper in steel design, Drum brake front and rear axle, Oil cooler transmission Further equipment: EURO 5 emissions standard, Axle configuration: 6x4, Exterior mirrors electrically adjustable and heated, Exterior mirrors wide angle and heated, left, Exterior temperature display, Battery 165 Ah, Roof hatch (steel), Rear axle differential lock, Cab: M (medium length), Suspension: leaf/leaf, Generator 80 A, Rear axle H 7, 13 t, Disc wheel 300, Hydraulic pump (Meiller pump - 6 pistons), Body/bodywork: Chassis for tipper (additional AV), Body/construction: tipper, Fuel tank: 300 ltr, Engine: 12.0 ltr. - 335 kW V6 diesel (OM 501 LA), Engine brake with constant throttle, Power take-off MB 2C, Wheelbase 3900 mm, Rear window, Seats in cab: Driver's seat, standard swivel seat, Telligent gearshift, Telligent brake system with ABS+ASR, Drum brake rear axle, CB radio preparation, Telephone/fax preparation, Front axle straight, Immobilizer, Thermal insulation glazing, Central locking incl. key, Gross vehicle weight 26.00 t For more detailed information and/or pictures, please contact us directly. You will find a large selection of other vehicles to BUY or RENT under: Subject to changes, prior sale and errors excepted. The buyer is obliged to independently check the condition and equipment of the goods. The sale is subject exclusively to our general terms and conditions and to the exclusion of any warranty.

Condition: good (used), End mill, end mill, cutter, shell cutter -Manufacturer: Fette, end mill with longitudinal groove, 2 pieces -Type: Fette 75 x 75H Sp 880 HSS -Hole: Ø 27 mm -Cutting material: HSS -Price/Fee: complete -Transport dimensions: 155/75/H75 mm -Weight: 3.3 kg Bledsy A Ehfepfx Al Ajn

Condition: new, table length 2000 mm Bodpjznngrjfx Al Aeln table width 1200 mm table height 200 mm bore 28 mm weight 843 kg Specifications - High-quality S355J2+N steel + plasma nitriding - Material thickness approx. 24.5–27 mm - Hole diameter 28 mm - Holes in 100×100 mm grid pattern - Rounded corners, edges and holes - Side panel height 200 mm - Hole spacing on side panel: 50 mm - Includes scale markings on the surface - Construction reinforced with ribs - Grid lines enable precise set-ups - Special equipment for welding tables is available on request.

Condition: ready for operation (used), Festo 556815 / EGC-120-2000-TB-KF-0H-GK toothed belt axis SN: 3S7PLQX3B9D, used, in good condition, 100% functional, delivery as per photos. ATTENTION: Please enquire separately for packing and shipping costs! Bedsx Erlcopfx Al Aoln

Condition: used, Shimadzu Type: AG-X plus 20kN-50kN +750mm Dimensions: W 1206 x D 765 x H 2920 mm Technical specifications: Fmax: 50 kN Speed: 0.00005~1500 mm/min Accuracy: ±0.1 % JIS B7742 Class 0.5, ASTM E2658 Class A Crosshead-table distance (mm)(tensile stroke)*3: 215 to 1940 (20 kN: 0 to 1535 mm, 50 kN: 0 to 1475 mm) Possible test width: 600 mm Frame stiffness: 180 kN/mm 710 kg 200 V 4.5kVA/15 A + Accessories as shown Condition: used Scope of delivery: (see picture) (Specifications and data subject to change and errors!) Blodpfx Aezimkfsl Asn If you have further questions, we will be happy to answer them by phone.

Condition: used, maximum load weight: 11,910 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2016, loading space length: 7,500 mm, loading space width: 2,500 mm, loading space height: 2,900 mm, total width: 2,600 mm, total height: 4,000 mm, Year of construction: 2016, Equipment: tail-lift, 2-AXLE DRACO FRIGO TRAILER, CARRIER TRS ICELAND, 24 CC, TAIL LIFT (2021) Box: Cool/Freeze/Flowers, Frigo Martini Ebo Rhoon Chassis make and type: Draco MZS 218 Refrigeration: Carrier TRS Iceland First registration: APK: ? 2025 FRC ATP: No Inside dimensions (l x w x h): 750 x 250 x 290 cm Drawbars adjustable length: 40 cm Empty weight: 6,090 kg Loading capacity: 11,910 kg GVW: 18,000 kg Lift: Dhollandia 2,000 kg lift Suspension: Air suspension Axles: SAF axles with disc brakes Tyre size: 445/45 R19.5 Tyre profile axle 1: L30%, R30% Tyre profile axle 2: L30%, R30% Spare tyre trailer 445/45 30% Extras: Drawbar adjustable in length (40 cm), Carrier TRS Iceland refrigeration unit, Dhollandia 2,000 kg lift (Year of manufacture 2021!!), ABS, EBS, SAF axles with disc brakes, 2 toolboxes, Fully insulated box built by Martini, 5x stainless steel rails in floor and ceiling, 1x horizontal load securing rail, Extra lights, Rear doors, Rear bumper, Ferry connections, 2x spare tyres, Complete service history available, Directly available and ready for work, Box is large enough for 24 CC (Danish trolleys), 14 standard pallets or 18 Euro pallets, etc. Further information: * Type | Front axle: Continental * Tyre size | Front axle: 445/45 R19.5 * Tyre tread depth inside left | Front axle: 20% * Tyre tread depth inside right | Front axle: 20% * Maximum axle load | Front axle: 9,000 kg * Type | Rear axle: Continental * Tyre size | Rear axle: 445/45 R19.5 * Tyre tread depth inside left | Rear axle: 40% * Tyre tread depth inside right | Rear axle: 40% * Maximum axle load | Rear axle: 9,000 kg * Tail lift | Manufacturer: DHOLLANDIA * Tail lift | Load capacity: 2,000 kg * Position | Front axle: Rear * Brand | Front axle: Other * Brake type | Front axle: Disc brakes * Suspension | Front axle: Air suspension * Position | Rear axle: Rear * Brand | Rear axle: Other * Brake type | Rear axle: Disc brakes * Suspension | Rear axle: Air suspension * Tail lift | Type: Tilting and sliding tail lift Further equipment: * Rear doors * Homepage * SemCollection Semtrade B.V. Contact: Martin Klaaijsen | Tel: | Whatsapp: | Email: Bjdpfx Ajztlkrsl Aeln Export costs: Please inquire in advance about the costs and procedures in your respective country. Location: Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to changes, prior sale and errors.

Condition: reconditioned (used), Year of construction: 2014, Working width 4000 mm Working height 2550 mm Number of cylinders 6 St. Dimensions (L/W/H) 5.000 x 1.200 x 2.900 mm loading dimensions L x W x H 5.000 x 1.200 x 2.900 mm S+S Bavaria 2000 L window frame and sash press The press was partially reconditioned at our warehouse, immediately available! Technical specifications: - Working dimensions: 4000 mm x 2550 mm (length x height) - Abutment and pressure plate depth: 100 mm - Automatic press cycle for "mortise and tenon" corner joints - hand control for manual pressing mode - 1 central pressure beam (accommodates heights up to 2550* mm) - 1 transverse pressure unit - 1 shut-off valve for the 3rd vertical cylinder - 1 shut-off valve for the upper horizontal cylinder - 3 controls for angled window processing (vertical cylinders) - 3 attachable pivoting pressure plates for pressing angles up to 60 degrees - 2 extensions for pivoting pressure plates (for triangular/pointed windows) - Surcharge for minimum dimensions - All pressure plates and abutments faced with plastic - Control cabinet located on the inside of the left base leg - Press can be completely disassembled if required (price on request!) Bodpfx Aszpblkjl Aeln - Finish: RAL 7035 Light Grey and RAL 7016 Anthracite Grey Image shows an archive photo of a delivered press. No original photos available yet. (Technical specifications provided by the manufacturer – subject to change/no guarantee)

Condition: good (used), Desk, height adjustable desk -Manufacturer: Palmberg, height-adjustable desk -Tool-free: height adjustable by means of removable adjusting elements -Width: 2000mm -Depth: 800 mm Blodpfjttim Hjx Al Ajn -Height: 680-760mm -Number: 6x desk available -Price per piece -Dimensions: W/D/H 2000/800/H720 mm -Weight: 43 kg/piece

Condition: used, Automatic filling line for EX-type products, i.e., products filled in a potentially explosive hazard zone 2. These devices are used for products of the following types: - detergents, - cleaning agents, - solvents, - windshield washer fluids, - various types of liquid chemical raw materials, - plasticizers and other process liquids, - fuels and oils, - other liquid petrochemical products – provided that the materials are compatible and the EX design is appropriate. The filling system consists of several components: - ROBAK volumetric filler, type: ANO-750, with Endress+Hauser DOSIMASS flowmeter fillers, EEx standard – this is a Coriolis flowmeter that can directly measure mass flow, as well as density and temperature, and based on this, volumetric flow. - ROBAK single-head capping machine, type: ZR-02, EX standard, currently in a format for 1 L bottles with a safety cap for hazardous products. - ROBAK cap feeder, type: MPZ-03 - Control cabinet Option for filling bottles or canisters. Bjdpfx Ajzu Rqtsl Aeln System capacity: 500 - 2,000 bottles per hour. Complete documentation for the machines. Option to order conveyor belts in EX standard. Used machines, regularly serviced.

Condition: new, pressure: 175bending length: 3020column width: 2550daylight: 600stroke lenght (max.): 350column throat depth: 450messurements (LxWxH): 3700x2230x3025weight approx.: 12.0504 axes (Y1, Y2, X, R): Ja alle Achsen über die Esa S630 (2D Grafik Steuerung)CNC crowning system by control: ja über die CNC Steuerung Esa S630 (2D Grafik Steuerung)motor power: 22Standard Equipment: KKI EUROPA XL CNC Press Brake by KK-IndustriesKK-Industries proudly serves as the official representative of the DENER Group, offering a high-quality model tailored for the European market. The KKI EUROPA XL CNC Press BrakeThe KKI EUROPA XL, manufactured by DENER, is a robust and highly precise press brake designed for universal applications. With its superior installation height and extended stroke, the EUROPA XL is built to meet the demands of a wide variety of tasks. Its large projection minimizes limitations, ensuring a versatile and efficient operation. Quality and PrecisionAt KK-Industries, we prioritize quality, and this is evident in the exceptional features of the EUROPA XL. The press brake comes equipped with the DELEM DA 66 T control system as standard, offering intuitive operation and advanced functionality. The EUROPA XL features CNC axes (Y1, Y2, X, and R) as standard, enabling precision control over every aspect of the bending process. The CNC crowning system, integrated into the DELEM DA 66 T, ensures optimal alignment and consistent results across all bends. Top-Quality ToolsIn addition to the advanced control system, we ensure that the KKI EUROPA XL is equipped with the finest tools available. The upper tool and die are sourced from EUROSTAMP in Italy, guaranteeing outstanding quality and durability for every application. Bsdpfxjfrvw Io Al Aoln Service ExcellenceAt KK-Industries, we understand that a machine is only as good as the service it receives. That’s why we prioritize highly qualified personnel with extensive experience in CNC sheet metal working. Our team ensures that your KKI EUROPA XL operates at peak performance and receives the support it needs to excel.

Condition: new, sheet width 1550 mm plate thickness 6.5 mm pre-bending 4.5 mm diameter of upper rolls 150 mm side roll diameter 130 mm diameter of lower rolls 150 mm distance max. OW zu UW 20.0 mm total power requirement 2.2 + 1.5 kW weight of the machine ca. 2370 kg. range L-W-H 3300 x 1150 x 1110 mm Exhibition machine - NEW not yet in use (!!) Special price on request Equipment: - electro-hydraulic 4-roller round bending machine * with driven top roller + bottom roller * stable welded construction - Area of application: * light to heavy sheet metal processing (steel/aluminum/stainless steel) - electro-hydraulic adjustment of the bottom + side rollers - linear guidance of the side rollers - top roller driven by robust electric motor + planetary gear - freely movable, separate control panel - hardened rollers SAE 1050 (CK 45) + crowning - conical bending device - 3x axis digital display for precise roller positions - electro-hydraulic folding bearing Blsdpfx Aoxabkbol Aen - operating instructions (PDF)

Condition: used, mileage: 68,000 km, power: 375 kW (509.86 HP), first registration: 03/2022, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 08/2026, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,450 mm, loading space volume: 14 m³, Year of construction: 2021, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Internal Reference Number: #210 MAN TGS 28.510 6x2 BL Wiedemann Super 2000 8.0/5.0/1.0 MAN TGS 33.510 6x4 with powerful Wiedemann Super 2000 water recycling unit (8.0/5.0/1.0). This vehicle is purpose-built for professional sewer cleaning and jetting operations, combining high suction power, effective water recycling, and robust high-pressure technology in a durable, user-oriented configuration. With a 14,000 L tank capacity, 3,000 m³/h vacuum power, large-diameter DN150 suction line, and a high-performance Uraca high-pressure system, this recycler is ideally equipped for demanding municipal and industrial applications. Extensive operating, comfort, and safety features enable efficient workflows even during long periods of use. Body: * Wiedemann enviro tec * Super 2000 8.0/5.0/1.0 water recycling unit * 14,000-liter tank capacity * 1,000-liter fresh water * 5,000-liter jetting water * 8,000-liter sludge compartment * Discharge by tilting tank up to 45° Vacuum System: * Wiedemann & Reichhardt KW 3000 * 3,000 m³/h * Galvanised DN150 pipework * Approx. 20 m suction hose DN150 High Pressure System: * Uraca P3-45 65 413 liters/min at 175 bar * Approx. 160 m HP hose DN32 * Hydraulic jetting hose reel with approx. 80 m DN13 Additional Fresh Water Unit: * Speck NP 25/50-150 with 50 l/min at 150 bar * Spring rewind hose reel with 15m pressure hose DN10 Special Features: Blsdpeydhh Njfx Al Ajn * Sludge tank made of material 1.4301 (stainless steel) * Suction and HP booms * 5-liter heated hand wash * Stainless steel toolbox * Operator control cabinet with display * Engine start controllable from cabinet * NMV start controllable from cabinet * Radio remote control with display * Equipment cabinet with two doors – both sides accessible * Hose storage rack * Extended soundproofing for pump compartment * LED work lights * Central lubrication system Technical Data: * Unladen weight: 18,385 kg * GVW: 26,000 kg * Length: 10,100 mm * Height: 3,450 mm * Width: 2,550 mm Chassis: * MAN * TGS 28.510 * 6x2 * 375 kW / 510 HP * EURO 6 * Automatic transmission * Air conditioning * Self-propelled working machine — sewer cleaner Conclusion: An extremely powerful MAN TGS 28.510 6x2 equipped with Wiedemann Super 2000 water recycling body, advanced vacuum and high-pressure technology, and thoughtfully designed operator and comfort features. The ideal solution for professional sewer cleaning companies who place value on efficiency, performance reserves, and rugged technology. For further details and/or pictures, please contact us directly. A wide range of additional vehicles for SALE or RENT can also be found at: Changes, prior sale and errors excepted. The purchaser is obliged to independently verify the condition and equipment of the goods. The sale is made exclusively under our general terms and conditions and excludes any warranty.

Condition: excellent (used), mileage: 148,777 km, power: 552 kW (750.51 HP), first registration: 06/2024, fuel type: diesel, axle configuration: 6x2, wheelbase: 6,570 mm, fuel: diesel, fuel tank capacity: 1,000 l, color: grey, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2024, Equipment: ABS, AdBlue, Bluetooth, air conditioning, airbag, central locking, cruise control, electric window regulation, fog lights, navigation system, onboard computer, parking heater, power assisted steering, power mirror, traction control, trailer coupling, = Additional Options and Accessories = - Adaptive Cruise Control - Aluminum Fuel Tank - High Beam Lights - Low Noise - Speed Limiter - Cab - Refrigerator - Leather Interior - Leather Upholstery - Air Suspension - Air-Suspended Seats - Media System - Metallic Paint - Rotating Beacon - Reversing Camera - Sleeper Cab - Sun Visor - Lane Keeping Assist - Auxiliary Heater - Toolbox - Power Take-Off (PTO) - Central Lubrication System - Drawbar Coupling = Further Information = Technical Information Number of Cylinders: 6 Engine Displacement: 16,123 cc Transmission: I SHIFT, Automatic Front Axle: Steerable Rear Axle 1: Dual Tires; Lift Axle Weights Unladen Weight: 13,669 kg Payload: 18,331 kg GVW: 32,000 kg Functional Body Brand: VDL S 26 Pump: Yes Interior Bsdpfx Alsy Thr Is Asln Upholstery: Leather Condition Technical Condition: very good Optical Condition: very good Identification License Plate: 19-BXV-1 VOLVO FH 16 750 6X2 VDL CONTAINER TIPPER TRUCK EURO 6 L PACKAGE 750 HP DRIVE 6X2 WHEELBASE 520 CM AIR SUSPENSION DIFFERENTIAL LOCK I-SHIFT AUTOMATIC VOLVO ENGINE BRAKE PLUS SLEEPER CAB WITH AIR CONDITIONING DRIVE ALERT CONTROL (COLLISION WARNING) LANE KEEPING ASSIST SIDE VIEW CAMERA AUXILIARY HEATER 27MC, MEDIA TOOLBOX TRAILER COUPLING VDL S-26-6600 HOOKLIFT SYSTEM HYDRAULIC CONTAINER LOCKING HOOK HEIGHT 145CM

Condition: refurbished (used), Year of construction: 2026, (3) Mikrosa SASL 5 CNC (size similar to Kronos M, MX, L) CNC overhaul and retrofit in progress full overhaul and CNC retrofit (pending) komplett Ueberholung + CNC retrofit Grinding wheel 500mm wide x 610mm dia. CNC 5 axis / 5 axis Mikrosa SASL 5 CNC photos of the last finished machine, for reference only complete overhaul and retrofit Grinding wheel 500 x 610 mm Regulating wheel 400 x 650mm Fixed center Complete mechanical overhaul Complete electrical overhaul Elimination of hydraulic movements Application CNC Siemens 840D 5 axes controlled in position with digital brushless motors: - Operating wheel axis motor with optical scale - 4 dressing axes: 2 on the grinding wheel, 2 on the regulating wheel - rotating axis with adjustable speed motor on regulating wheel - rotating axis with 55kW AC motor with inverter on grinding wheel to adjust RPM / peripheral speed (m/sec) Set-up for through-feed grinding and still customizable according to customer needs. Machine refurbished, grinding test in our warehouse is possible, CE certification, manuals, 12 months warranty also available Machines can be inspected in our warehouse in Gussago BS Google Map HERE INFO? . Machine Tools - Machine Tools Gussago (BS) - Italy Tel:  Centerless grinding is a procedure for grinding cylindrical bodies and is used for the mass production of rollers cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, tips, etc. During centerless plunge grinding (plunge grinding), the workpiece is ground in one pass thanks to the translation of the wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the workpiece to work which is given to them with the aid of a tool. Through-feed grinding or also through grinding and longitudinal grinding: parts to be machined proceed uninterruptedly with axial advancement through the grinding gap. Grinding wheel width: 500 Grinding wheel diameter: 610 CNC: 5 axis (new) Bedogmf Rnepfx Al Aoln