Used Biko Round Bending Machines for sale (67,567)

Condition: new, Year of construction: 2026, sheet width 3100 mm plate thickness 9 mm pre-bending 6 mm diameter of upper rolls 220 mm diameter of lower rolls 200 mm side roll diameter 170 mm min. dia. 250 mm roll speed 6 m/min total power requirement 10,3 kW weight of the machine ca. 4651 kg dimensions of the machine ca. 4915 x 1120 x 1235 mm Features - Machines include the following DAVI standard specification: The components of the machine structure (machine stand, frame and swivel bearings, etc.) have been calculated and designed to withstand the loads required for the applications and performance levels. The robust and heavy-duty machine construction absorbs the loads generated during the bending process without transferring them to the foundation. - High-quality surface finish: For forming delicate surfaces and/or soft materials without leaving marks Hydraulic-mechanical parallelism system, supported by electronics for fine-tuning. There are two INDEPENDENT & SYMMETRICAL hydraulic circuits for the left and right cylinders of each roller. The oil flow is regulated by two DOUBLE PUMPS, which are mounted on the same motor shaft and are fully synchronised. The two symmetrical hydraulic circuits move the cylinders and supply the rollers with the SAME amount of oil in a fully synchronised manner. Electronic control is activated only for extremely precise fine-tuning. - Smooth transmission of the drive Both the hydraulic motors and the gearboxes (top and bottom) can follow the deflection of the roll without load when bending narrow sheets. This ensures perfectly symmetrical deflection of the rolls under load. This system also allows the rollers to deflect freely, without the risk of breakage under excessive load. - ‘Roll-by-Wire’© digital technology Since 2004, DAVI has revolutionised the way sheet metal rollers are wired (similar to ‘fly-by-wire’ technology in the aerospace, FMS and automotive industries) and introduced ‘Roll-by-Wire’ technology. This allows the entire control system of the roller to be controlled via digital signals rather than, as was previously the case, via numerous relays and contacts. Digital technology is much faster and more reliable. Action Benefit Reduction in the number -> Reduction in potential of components component failures Very compact design -> Improved accessibility for maintenance work Improved accessibility for -> Damaged parts can be identified maintenance work more easily More reliable -> Greater accuracy thanks to the use of ‘digital signals’ Permanent lubrication technology The lever-arm feed system eliminates all linear friction during the movement of the side rollers, as the roller support arms, which house the bushings, rotate simply and smoothly around two large, strong pivot points made of alloy steel, ensuring precise and friction-free rotation. This guarantees reduced Lhsdpfx Ahsz Dxpmo Sjn wear and safety during unlimited use. Further advantages of the lubrication-free lever-arm feed mechanism are: •NO daily maintenance required (lower operating costs). •More production time available. •The bearings are sealed to protect against scale, dust and rust - Hardened rollers •Excellent heat tre...

Condition: new, shaft diameter: 50 mm, – Shaft diameter 50 mm – Upper roller hydraulically adjustable Lhedez Ai R Iepfx Ah Son – Digital display – Can be used horizontally/vertically – Foot-operated control – Emergency stop – Documentation – 400V

Condition: new, Year of construction: 2009, 30 mm 30 mm Lhodpfx Ahsv Skzde Sen L-beam 20 x 20 x 4 mm flat steel 25 x 6 mm Axis diameter 20 mm work speed 11 U/min total power requirement 0,2 kW weight of the machine ca. 80 Kg dimensions of the machine ca. 0,6 x 0,6 x 1,5 m Profile bending machine with: - Foot pedal for right/left rotation - Digital display - 1 set of standard rollers - 3 rollers are driven - Horizontal or vertical operation

Condition: new, number of rollers: 3, shaft diameter: 50 mm, – Shaft diameter: 50 mm – Digital display – Forward and reverse operation – Can be used horizontally and vertically – Foot pedal control – Emergency stop – Documentation – 400V Lhsdpfxsz Dquue Ah Sjn

Year of construction: 1995, condition: used, Wire diameter: 0.4-1.5mm, control: MCS SYSTEM V, an on-site inspection is possible. Ljdpfx Ahjz E Nrho Sohn

Condition: excellent (used), CATALOGUE NUMBER 8015 TECHNICAL DATA - Range of diameters of workpieces 40-140mm - Max. diameter of input material 210mm - Min. length of input material 600mm - Max. allowance per side for machining 30mm - Fitted sleeve with a diameter of 100mm - Motor for driving the cutter head 18.5kW - Feed + forward/backward - Feed motor 3.73kW In sequence: - Infeed trough - Toothed draw rollers, 6 pcs - 4-cutter head Ljdpfx Aheztafko Sjhn - Smooth draw rollers, 6 pcs - Dimensions (L/W/H) 2600x1200x1390mm - Weight 1700kg ADVANTAGES - Made in Poland - DTR documentation available - Used chamfering machine, very good condition Net price: 49,900 PLN Net price: 11,605 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to fluctuations in the exchange rate)

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: HB10011N2025006, The machine has not been used yet! Lhsdszuw D Tspfx Ah Son MACHINE DETAILS Control: Teach-in Motor power: 4.0 kW Dimensions & Weight Dimensions (L x W x H): 1,300 x 800 x 1,400 mm Unladen weight: 800 kg Transport packages: 1 piece EQUIPMENT Documentation CE marking CE certificate

Condition: as good as new (ex-display), Year of construction: 2022, 1550 mm 2,0 mm 1,5 mm roll diameter oben 90 mm 560 kg 2580 x 700 x 1250 mm mm - 2 central rollers driven by an electric motor - Swing-out upper beam - Conical bending device - separate control panel - self-braking main motor - CE mark/Declaration of Conformity Special equipment included in the price: Ledpfxoxcuxdo Ah Sjhn - hardened rollers - Motorized rear roller adjustment

Condition: good (used), Year of construction: 1995, Includes bending tool Lsdpfxjxm Tn Ej Ah Sehn The machine can process: aluminium, Chromatec/stainless steel. Suitable for moulds and models. 4-compartment profile magazine. Total length: 12,000 mm Max. height: 2,760 mm Depth: approx. 2,000 mm Weight: approx. 2,500 kg

Condition: used, Engine and transmission for GRM 80 – according to the previous owner, the transmission was overhauled and has not been used since. Lhedpfx Aozw I Hqeh Sjn ATTENTION!! This offer includes only the engine and transmission!

Condition: new, Year of construction: 2026, - Minor transport damage (small dent on the control cabinet, see photo) - Shaft diameter: 60 mm - The two lower rollers are adjusted hydraulically - Three rollers are driven - 2 digital displays - Brake motor Ledpfx Ahoz Aiutj Sehn - Can be used horizontally/vertically - Mobile control panel - Emergency stop - Documentation - 400V

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1998, machine/vehicle number: 7395, tube wall thickness (max.): 8 mm, bending radius (max.): 600 mm, working height: 1,200 mm, overall weight: 9,000 kg, TECHNICAL DETAILS Tube outer diameter: 40–100 mm Maximum tube dimensions: 110 × 5 mm Lhedpfsz Im Rasx Ah Son Maximum wall thickness: 8 mm Outer diameter of solid material: up to 70 mm Tube insertion length / usable length: 1,200 mm Maximum bending radius: 600 mm Bending height: 1,200 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,600 x 1,400 mm Weight: 9,000 kg

Condition: used, functionality: unexamined, Year of construction: 2006, machine/vehicle number: 109, control type: NC control, actuation type: hydraulic, controller manufacturer: siemens, pipe diameter (max.): 80 mm, pipe length (max.): 4,500 mm, tube wall thickness (max.): 4 mm, bending angle (max.): 180 °, overall weight: 1,500 kg, Equipment: CE marking, emergency stop, Tracto Technik mandrel bending machine TB 80 L Year of manufacture 2006 with bending tools 11/4", 11/2", 2" gas with mandrel rods and mandrels Tube feed length 4500 mm Bending direction: right Bending capacity up to tube 76.1 x 4.0 mm Lhsdjz Rn Srspfx Ah Ssn Maximum bending radius 200 mm Electro-hydraulic drive 3.5 kW 400 volts 50 Hz 3-phase Overall length 5615 mm Weight 1500 kg Freestanding bending head for maximum bending freedom Electronic bending axis control via touch panel, with setpoint/actual value display, automatic angle adjustment and memory function Tube clamping hydraulically, clamping pressure adjustable Glide block adjustment hydraulically Glide block unit rotating (glide guide) Bending mandrel extraction hydraulically Machine is mobile and can be used flexibly

Condition: good (used), Year of construction: 1989, sheet width 2050 mm plate thickness 8.0 mm pre-bending capacity 6.0 mm upper roll diameter 190 mm lower roll diameter 180 mm bending speed 5.2 m/min work height max. ca. 980 mm total power requirement 5.5 kW weight of the machine ca. 3500 kg. range L-W-H 2900 x 1200 x 1280 mm Furnishing: - Robust electro-hydraulic 3-roller bending machine - planetary movement of the bending rollers with reduced center distance - Hydraulic motors combined with planetary gears * for driving the 3 rollers - mobile operating unit, with connection cable + plug - extended roll ends for profile bending rolls - with conical bending device * Inclination of the side rollers by handwheels * Workpiece limitation for a cone with a 45° pitch: * Working length max: 60% * Bending capacity max: 50% - free-moving operation * electric delivery rollers * electric turning/rolling movement * digital position display of the reels Lhodoz Dkzhepfx Ah Son - hardened rollers SAE 1050 CK 45 - Hydraulic folding store for removing closed pipes - safety device (cable) - Original instruction manual + CE declaration * Machine link : ?machineno=1008-9401255

Condition: used, Max. Bend length: 1500 mm Max. sheet thickness: 1.5 mm steel Manual and automatic bending process possible Bending angle adjustable via potentiometer Hoist height of the upper jaw and material thickness preselected above the limit switch Manual rear stop Lodpfoudqd Rsx Ah Sehn Weight: approx. 1000 kg

Condition: used, Technical details: bending angle max.: 180 ° working height: 350-550 mm operating voltage: 380 V revolutions per minute: 10-20 U/min number of bars max.: 1-4 mm Lhedoxu Dxqjpfx Ah Sen total power requirement: 1,3/2,1 kW Weight approx.: 690 kg dimension machine xH: 1,2 x 0,87 x 1,2 m -Two plate speeds -Mode selector switch for automatic mode, jog mode, continuous operation -Four continuously adjustable counterholder bars without accessories! *

Condition: used, Year of construction: 1993, Technical details: tube diameter: 80 mm tube diameter min.: 6 mm control for program: Gelma MM-1 tube pipe draw up length: 1800 mm weight of the machine ca.: 0,232 t dimension machine xH: 1,9 x 0,7 x 1,3 m Semi-automatic PIPE BENDING MACHINE Operating modes are manual but also semi-automatic Application: for multiple bending of pipes The swivel unit with bending preselection for 3 different bending angles in single and automatic mode. The machine is currently equipped with a stop bar for tube size Ø 10mm for 6 angle settings. The bending machine is movable/adjustable. Ledsu Ibyyspfx Ah Sohn Equipment/accessories: 6 cam rods/stop rods 6 control disks Bending tool for Ø 12mm *

Condition: new, sheet width 1070 mm plate thickness 3,0 mm distance between columns 1100 mm diameter of upper rolls 95 mm total power requirement 1,1 KW weight of the machine ca. 420 Kg dimensions of the machine ca. 1600 x 800 x 1200 mm Motorized sheet metal bending machine with: - Foot switch for left / right - manually adjustable rear roller - Hardened rollers - Conical bending - Swiveling top roller - Safety device emergency leash - Documentation currently only in English - 400V Lsdshfhzvepfx Ah Sehn

Condition: used, Year of construction: 2007, Amada punch press EMK 3610NT including MP300 loading unit for sale. Lhedpfew Hww Hsx Ah Son We would like to sell the machine as a complete package with tooling and a Wilson X-Sharp grinding machine. The standard tools are listed in the attached inventory. I can send it to you via email.

Condition: excellent (used), Bending length: 1020 mm Bending capacity: 2 mm Stroke of the upper beam: 220 mm Adjustability of the lower and bending beams: 60 mm each Total weight: approx. 0.5 tons Equipment: - Finger stop scale, pinion and rack, adjustment range from 0 – 600 mm - Weight compensation for the bending beam Lsdpez Icuhefx Ah Sjhn

Condition: used, total length: 1,800 mm, total height: 1,400 mm, total width: 2,250 mm, Year of manufacture: 1972 Colour: Green Empty weight: 2.000 kg Price: On request - Year: 1972 - Control: Conventional - Transport dimensions: 1800mm x 2250mm x 1400mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Lhsdjzm N Rijpfx Ah Son Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2026, Base frame for Fortuna roll presses, mobile or stationary Suitable for Fortuna automatic roll presses and other manufacturers (Fortuna semi-automatic, fully automatic, size 3/4) With heavy-duty, low-profile rollers or, depending on requirements, designed for stationary use Lhedpsz A Sntofx Ah Ssn With threaded mounting holes Made of solid stainless steel plate

Condition: used, We are offering a JUTEC 6000D tube bending machine here. Please refer to the attached offer for technical data. Lodpfx Ahexz Rz Ee Sohn If you have any questions, we are happy to assist you.

Condition: as good as new (ex-display), Year of construction: 2025, tube diameter 10.0 - 42.0 mm Stahl wall strength 3.0 mm Stahl tube diameter 54.0 mm CU/Alu bar material - diameter 30.0 mm Ljdpfx Aoxab Hveh Sohn wall strength 2.0 mm revolutions per minute 1.30 U/min voltage 400 Volt total power requirement 1.5 kW weight 110 kg range L-W-H 400 x 450 x 570 mm Exhibition machine - like new never been used (!!) Special price upon request - Steel tube capacity: 42.0 x 3.56 mm - Gas tube capacity: 1" 1/4" Gas x 3.5 mm - Square profile capacity (FE 42) 40 x 20 x 2.6 mm - Max. bending radius: 200 mm - Minimum radius: 2 x D - Hexagonal tool holder - Min. outer diameter: 5 mm - 1/8" Gas Features: - Patented quick tool change system - One bending speed - Digital machine display - 1x freely movable foot switch - 1x bending tool set included * Additional segments available upon request for an additional charge * ERCOLINA tool holder

Condition: new, sheet width 1000 mm plate thickness 3,0 mm distance between columns 1050 mm diameter of upper rolls 90 mm total power requirement 1,1 KW weight of the machine ca. 0,47 t dimensions of the machine ca. 1,7 x 0,8 x 1,35 mm Sheet metal bending machine with custom dimensions: - Capacity 1050 x 3.0 mm - Digital display - Hardened rollers - Conical bending Lhodpoyv I Izsfx Ah Sjn - Swiveling top roller - Brake motor - Safety device: Emergency stop cord - Documentation in English - 400V