Used Bitzer Co2 Installation & Cold Room for sale (11,128)

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Dodpfx Aioy Hkd Hexeuu Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: used, Mitre Cold Circular Saw WMW (VEB GDR) Serial No. 189886 Year of manufacture: 1989 Saw blade diameter max. 300 mm Cutting range at 90° round approx. Ø 75 mm Square approx. 70 x 70 mm Cutting range at 45° round approx. Ø 55 mm Square approx. 50 x 50 mm Vice clamping width 100 mm Dedpfx Aey Ra D Doixouu Saw blade speed 31.5 rpm Motor power 0.37 kW Connection 230 Volt, 50 Hz - Mitre adjustment up to 45° - Material vice - Mounted saw blade Ø 275 mm Dimensions (L x W x H) 600 x 600 x 700 mm Weight 47 kg Good condition

Condition: reconditioned (used), Year of construction: 2013, Thermocontainer used; overhauled showing signs of wear Type designation: C-720ü Technical data Interior: 610 x 810 x 1440 mm Outside: 735 x 955 x 1770 mm Weight: approx. 90 kg Content in litres: approx. 720 With slide-in bars for grids Features Locking in the middle of the door 2 lateral pull handles 1 folding handle in the door recess Trolley with castors 108 mm, PA, cold store safe Door-stay Inner tray with slide-in strips Angular corner supports with bend PE - sheets (2 mm thickness), light blue Profiled deflector plates (3 sides) 2 rigid wheels, 2 mobile wheels, padlockable with padlock Loadable up to approx. 400 kg From company dissolution, REVISED Prices: net per piece plus the currently valid VAT. Fine cleaning is to be carried out by the buyer Auction consists of a container Colour sales depending on stock For time reasons, enquiries regarding this article can only be made to information of a telephone number can be answered. approx. 100 pcs. in stock Duedjd Syhaopfx Aixju Article is only offered for self collection. Do you wish a shipping, please contact us in advance by telephone

Condition: good (used), functionality: fully functional, . Fully hydraulic automatic circular saw, manufactured by TRENNJAEGER . Technical data : Saw motor, pole-switchable 1.5 / 2.0 kW Saw blade 275 mm 6 cutting speeds 16 , 20 , 25 m/min + 32 , 40 , 50 m/min . - Integrated hydraulic system Dodpfx Ajza Hnmeixjuu - Protective housing, limit switch-protected - 6 sawing speeds . .

Condition: used, Year of construction: 2021, operating hours: 247 h, functionality: fully functional, machine/vehicle number: Tecto DC2 BS, input voltage: 400 V, total width: 1,170 mm, total length: 3,750 mm, total height: 1,230 mm, temperature: 2 °C, type of input current: three-phase, cooling capacity: 3,845 kW (5,227.74 HP), ambient temperature (min.): 4 °C, control cabinet height: 1,230 mm, control cabinet length: 3,750 mm, control cabinet width: 1,170 mm, overall weight: 300 kg, Refrigerated counter on 2 levels for displaying refrigerated goods. The bottom level is for wrapped accessories. The top level is for dispalying fresh seafood / meat / cheese / deli. Excellent Italian quality. There are fridge in both levels. Model: Tecto DC2 BS. Cooling requirement: 3845W (for 24/7 use) Color code: RAL7035 / RAL9006 Lengt: 3,75 meter Depth: 1,17 meter Dedpoy T Iimjfx Aixeuu Hight: 1 meter 23,5 cm Cooling maschine: Split R452a Need electrician, plumber and refrigeration technician to install it.

Condition: like new (used), Refrigeration pack bought new in 2023 and never used. Cost almost £2 million, this was installed to run a spiral freezer and other machinery but due to the company going bankrupt, it was never commissioned. Extremely efficient to run compared to conventional systems. Dsdpfxewcwbqe Aixjuu

Condition: good (used), Manufacturer: Kaltenbach Model: KKS 400 E Saw blade diameter: 400 mm Cutting range round: 130 mm rectangular: 305 x 40 mm Mitre cut at 45° round: 130 mm rectangular: 245 x 40 mm 2 cutting speeds: 9 and 18 m/min Feed speed steplessly adjustable: 0 - 1000 mm/min Saw drive: 380 V, 1.7/2.6 kW Weight approx.: 800 kg The machine is in very good condition and ready for immediate use Forklift available, free loading onto truck Affordable shipping possible Machine location: 48477 Hörstel Duodpsy Sktfofx Aixou

Condition: ready for operation (used), Pedrazzoli Brown ADB 142, Pedrazzoli Horizon 425 AP 1500 IMS and Pedrazzoli MDB 102 Orbital fully automatic circular saw machine with deburring installation Transport dimensions part 1: 520x210x190 cm (LxWxH) Transport dimensions part 2: 600x230x190 cm (LxWxH) Transport dimensions part 3: 385x150x210 cm (LxWxH) For capacity see table Location: Hamont-Achel, Belgium The seller is not liable for typing or data transmission errors. The machine is in accordance with its age in terms of appearance, technology and wear; used machines are sold without warranty. The price shown does not include VAT Pedrazzoli Brown ADB 142, Pedrazzoli Horizon 425 AP 1500 IMS and Pedrazzoli MDB 102 Orbital fully automatic circular saw machine with deburring installation Transport dimensions part 1: 520x210x190 cm (LxWxH) Transport dimensions part 2: 600x230x190 cm (LxWxH) Transport dimensions part 3: 385x150x210 cm (LxWxH) For capacity see table Location: Hamont-Achel, Belgium Dujdpfxjurm Ups Aixsu The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear in accordance with its age; used machines are sold without warranty. The price shown is exclusive of VAT Pedrazzoli Brown ADB 142, Pedrazzoli Horizon 425 AP 1500 IMS und Pedrazzoli MDB 102 Orbital-Vollautomatik-Kreissägemaschine mit Entgratungsanlage Transport dimensions Teil 1: 520x210x190 cm (LxWxH) Transportmaße Teil 2: 600x230x190 cm (LxWxH) Transport dimensions for unit 3: 385x150x210 cm (LxWxH). Kapazität siehe Tabelle Standort: Hamont-Achel, Belgium Der Verkäufer haftet nicht für Tipp- oder Datenübertragungsfehler. Die Maschine ist optisch, technisch und gebrauchstechnisch ihrem Alter entsprechend; Gebrauchtmaschinen werden ohne Gewährleistung verkauft. Der angezeigte Preis versteht sich exklusive Mehrwertsteuer

Condition: excellent (used), Year of construction: 2014, MEP Cobra 352 MA cold circular saw in very good condition. Dusdpfx Asyzbmnsixou Year of manufacture: 2014 Shipping is possible.

Condition: used, Heavy saw head with robust base and material clamp for non-ferrous metals and aluminium. More powerful motor, with pneumatic feed and 2 pneumatic material clamps. Dsdpfx Aijzap Hfexjuu

Condition: used, Year of construction: 1990, x-travel 600 mm y-travel 450 mm z-travel 450 mm control PHILIPS CNC 432 table surface area 740 x 440 mm spindle taper SK 40 spindle turning speed range 20 - 5000 U/min feeds 1 - 4000 mm/min Dodpfxetq I Hqs Aixjuu rapid traverse 6 m/min quill stroke 80 mm toolpiece magazine: chain magazine 30 Pos tool diameter if 2 vacant positions max. 130 mm tool diametre at full load 100 mm tool length - max. 250 mm weight of tools max. 8 kg total power requirement 15 kVA weight of the machine ca. 3,8 t Accessories: vertical head with hydr. tool clamping and quil retraction, univ. table (manual), electron. handwheel, coolant

Condition: used, Year of construction: 2000, x-travel 600 mm y-travel 400 mm Djdpfx Aioux Agioxjuu z-travel 400 mm table surface area 800 x 400 mm spindle taper SK 40 control HEIDENHAIN TNC 310 spindle turning speed range 10 - 3150 U/min spindle drive 5,5 kW feed - longitudinal/cross 1 - 5000 mm/min feeds vertical 0,5 - 2500 mm/min rapid traverse 6 / 6 / 3 m/min total power requirement 10 kVA weight of the machine ca. 2,5 t dimensions of machine L x W x H 2,16 x 1,70 x 2,0 m Accessories: solid table, vertical head with hydr. tool clamping and quill retraction, electron. handwheel, coolant

Condition: new, 400 x 32 mm capacity 90 degrees: round 145 mm capacity 90 degrees: square 130 x130 mm capacity 90 degrees: flat 300 x 80 mm capacity 45 degrees: round 105 mm capacity 45 degrees: square 115 x 115 mm capacity 45 degrees: flat 250 x 60 mm Dusdsyv Nhpepfx Aixeu total power requirement 1,8 kW weight of the machine ca. 240 kg dimensions of the machine ca. 800 x 1100 x 1400 mm Domestic equipments: - stepless, electronic speed control - Optional hydraulically controlled or manual belt arm lowering - Saw arm can be swiveled up to 60 ° right - quick release vice - Band guide with 8 ball bearings - Hydraulic saw blade clamping with clamping pressure display and strip break-off - Including coolant device - incl. machine cabinet

Condition: new, Year of construction: 2022, functionality: fully functional, power: 2,710 kW (3,684.57 HP), pressure: 6 bar, heating capacity: 2,510 kW (3,412.65 HP), temperature: 110 °C, tank capacity: 5,020 l, operating pressure: 6 bar, Equipment: hot water, type plate available, FOR SALE – COMPLETE INDUSTRIAL BOILER ROOM – YEAR 2022 Never used Complete industrial boiler room for sale, currently installed on site. LOT INCLUDES: • 2 Steel Hot Water Industrial Boilers Brand: Riello Model: RTG 2100 Year: 2022 Nominal thermal output (per unit): 2710 kW Useful output (per unit): 2510 kW Total thermal output: 5420 kW Maximum operating pressure: 6 bar Maximum temperature: 110 °C Water capacity: 5020 liters per boiler Heat exchange surface: 70 m² CE-certified • 2 Modulating Industrial Burners Brand: Riello Model: RX 3000 S/E Operation: Gas / Oil (configurable) With gas trains, safety systems, and accessories • 3 Industrial Expansion Vessels / Tanks Brand: Varem Large capacity With pressure gauges and accessories • Complete Hydraulic Groups Industrial circulation pumps Clearly visible manifolds and connections • Industrial Electrical Cabinets Control and power cabinets Protection devices, equipment, and cabling included • All other visible accessories related to the installation are included in the sale --- CONDITION: Very clean installation Equipment very lightly used Indoor storage System still installed for a short period On-site visit possible by appointment --- POSSIBLE APPLICATIONS: • Industrial boiler room • District heating network • Industry and logistics • Hospitals and tertiary buildings • Export --- LOGISTICS: Dismantling scheduled soon Duedpfx Aey Rthijixju On-site loading possible Transport at buyer’s expense --- Lot sale preferred Possible individual sale depending on project Price: to be negotiated Photos and further information available on request

Condition: excellent (used), Year of construction: 2004, 1 used, very well-maintained fully hydraulic circular cold saw automatic with flat vertical guides Max. saw blade diameter: 325 mm Cutting capacity at 90°: - Round: 100 mm - Square: 85 x 85 mm - Rectangle, flat: 165 x 85 mm Infinitely variable speed range: 20 - 100 rpm Max. saw blade dimensions: 325 x 3.0 x 40 mm Single stroke feed: up to max. 550 mm Multiple stroke feed: for lengths over 550 mm Working height: 930 mm Drive power: 3 kW / 400 V Machine dimensions (L x W x H): 2150 x 1450 x 1950 mm Weight: approx. 650 kg Accessories / Special Features: • Fully hydraulic design • Fully automatic operation, single cuts also possible • Vise feed • 90° cutting angle • Infinitely variable speed range 20 - 100 rpm • Length setting via programming on the control panel • Cutting speed and feed can be continuously adjusted on the control panel during operation • Single and multiple stroke feed Dedpfx Aijy E Uk Ioxsuu • Adjustable flat vertical guides • Coolant system • Micro-spray system • 1 used saw blade included • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, saw blade diameter 275 mm cutting diameter bis 90 mm cutting range flat 120 x 75 mm Duedpowglgiofx Aixju turning speeds 40/80 U/min miter cut 45°/90°/-45° ° weight of the machine ca. ca. 150 kg Manual saw blade feed Accessories: Coolant device Underframe with 2 drawers

Condition: used, Year of construction: 1998, functionality: fully functional, saw blade diameter: 315 mm, cutting height (max.): 80 mm, feed length X-axis: 7,500 mm, feed length Y-axis: 6,000 mm, total length: 13,000 mm, total height: 1,700 mm, total width: 2,300 mm, overall weight: 5,000 kg, cutting range square steel at 45°: 1 mm, cutting range square steel at 90°: 1 mm, cutting diameter: 80 mm, Siemens controller Djdpfsy S Abnox Aixjuu

Condition: used, Year of construction: 1979, saw blade diameter 300 mm cutting diameter 100 mm saw blade turning speeds 40 / 80 U/min capacity 90 degrees: square 90 mm Dsdpfey N D Nnex Aixouu capacity 90 degrees: round 100 mm total power requirement 1,5 kW weight of the machine ca. 0,5 t

Condition: used, Year of construction: 2002, x-travel 600 mm y-travel 400 mm z-travel 400 mm Dsdpfey N D Idjx Aixsuu table-size 800 x 400 mm spindle taper ISO Sk 40 spindle turning speed range 10 - 3150 U/min total power requirement 12,0 kVA weight of the machine ca. 2,2 t dimensions 2,0 x 1,85 x 1,95 m CNC Universal Milling Machine - Heidenhain TNC 310 with handwheel - Hydraulic tool clamp - Central lubrication - Coolant system - Machine light - Machine feet - Enclosure

Condition: used, Year of construction: 1994, x-travel 850 mm y-travel 630 mm z-travel 550 mm table surface area 1200 x 550 mm spindle taper SK 40 spindle turning speed range 20 - 4200 U/min spindle drive 11,5 kW quill stroke 95 mm feeds longditudinal/cross/vertical 1 - 10.000 mm/min rapid traverse longitudinal and cross 10 m/min rapid traverse vertical 10 m/min control HEIDENHAIN, TNC 426 total power requirement 21 kW weight of the machine ca. 6 t Accessories: NC-dividing unit (= 4th axis) with tailstock, make HOFMANN, model RWNC-160; vertical head with hydr. tool clamping and quill retraction, solid table, electron. handwheel, coolant Dujdey Nnxaspfx Aixsu

Condition: used, Year of construction: 1989, x-travel 600 mm y-travel 450 mm z-travel 400 mm table-size 850 x 440 mm spindle taper SK 40 control HEIDENHAIN TNC 355 ATC 32 Pos spindle turning speed range 20 - 4000 U/min spindle drive 5,9 kW quill stroke 80 mm Dedpfey Nnw Nex Aixsuu feeds longditudinal/cross/vertical 1 - 2000 mm/min power feed x/y/z 7200 N rapid traverse longitudinal and cross 10 m/min rapid traverse vertical 10 m/min total power requirement 12 kW weight of the machine ca. 3 t Acc.: NC-dividing unit (=4th axis) make WALTER with 3-jaw chuck 160 mmø, vertical head with hydr. tool clamping and quill retraction, solid table, various tool fixtures, electron. hand wheel, coolant

Condition: used, Locker changing room 1800 x 1200 x 500 Djdpfju Sphtox Aixouu RA2221 Manufacturer: unknown width: 1200 mm Height: 1800 mm depth: 500 mm different versions available 3 x 2, 2 x 2, 3 x 4 and 2 x 4 (horizontal x vertical) lockers benches also available Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: good (used), Year of construction: 1996, CUTTING RANGE ..... MIN 10MM TO 75MM Dusdoquuufepfx Aixju CUTTING LENGTH ..... 5-900 SINGLE STROKE -9999 REVERSE RUN CUTTING SPEED ..... 0 - 40 MM SEC. INFINITELY VARIABLE REVERSE 135MM/S MATERIAL FEED SPEED ..... MAX. 350 MM/S TENSION FORCE ..... MAIN CLAMP 10500N

Condition: reconditioned (used), Year of construction: 2019, 2-column high-performance automatic bandsaw BERG & SCHMID SBS 300 VA-1/CNC Year of manufacture: 2019 Cutting diameter round: 300 mm Cutting diameter square: 300 mm Cutting dimension flat: 300 mm x 260 mm Blade speed: 20 – 100 m/min Modern SNC 20 control Frequency-controlled saw drive Operator buttons with pictograms Driven chip brush Hydraulic blade tensioning Clamping pressure adjustment Work light Chip conveyor 2 m roller conveyor Duodoyw H Enjpfx Aixou

Condition: good (used), functionality: fully functional, Feed rates continuously adjustable in all 3 axes Spindle travel 60 mm Table surface 600 x 250 mm Dodpfxoy Uv D Ij Aixouu Spindle speeds 45 - 1950 rpm Feed rates 10 – 470 mm/min...continuously adjustable... Longitudinal travel (X) 315 mm Transverse travel (Y) 180 mm Vertical travel (Z) 320 mm