Used Casepacking Monoblock for sale (243)

Condition: as good as new (ex-display), Year of construction: 2024, Tube Bender BB 48 without mandrel Ppedpsfp Al Usfx Adljr - model BB 48 - capacity up to 48 x 3,0 mm (mild steel) round tube mild steel - digital readout - bending angle programable - with foot pedal - bending speed 2,2 rpm - motor 1,5 KW 400 volt 50 hz 3 ph. - all shafts and necessary parts are heat treated and grinded - monoblock body CK 45 - weight ca. 200 kg

Condition: used, Year of construction: 2014, operating hours: 4,848 h, Liebherr Engine D934 A7 – 140 kW (EPA) Weight: 43 tons Undercarriage EW - Width: 3,800 mm - Track gauge: 4,500 mm - Track pads, triple grouser, 600 mm, D6C, 56 links - Two-piece track guide Industrial monoblock boom, straight, Z1, 9.10 m Industrial stick, tip slightly angled, 7.50 m Hoist cylinder damping Active lowering of hoist cylinder Rod protection for piston rods, energy recovery cylinder Auto-lift Engine automatic shutdown Travel alarm, acoustic, non-deactivatable Proportional control (left): medium pressure circuit Joystick hand rest (raised) Ppsdeyffm Sspfx Adljr Roof window wiper Hydraulic cab elevation LHC 255 (from 3.24 m continuously adjustable up to 5.25 m) Narrow platform for LHC 255 Comfort radio Comfort driver's seat Cab floor window with armored glass Rear area surveillance with camera Work lights cabin front, 2 units, LED 1300 lumens Work lights cabin rear, 2 units, LED 1300 lumens Rotating warning beacon on cab, 1 unit Bypass filter, Liebherr

Condition: new, sheet width 2050 mm plate thickness 3 mm distance between columns 2100 mm back stop - adjustable 600 mm connected load kW weight of the machine ca. 1,1 t dimensions 2,7 x 2,1 x 1,4 m The machine works quietly and it is energy-saving by its gear motor and brake system. Our machine is manufactured as steel construction monoblock body welded from ST42 quality material. The blades on the machine are of 2379 quality and the brand’s name is BOHLER. These high-quality blades ensure quality and precise cutting. Emergency stop button and finger guard grill are standard equipment of foot Podjfv H Dkspfx Adlopr pedal machine.

Condition: refurbished (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: AE00002748, 12kN SEMI-AUTOMATIC CAM PRESS Brand: SCM Model: Action E Serial No.: AE00002748 Year: 2021 MAIN ADVANTAGES: - Better pressing quality, uniform across the entire surface to be machined (comb structure) - Parallelism and orthogonality thanks to the use of screws of the appropriate size. - Efficient operation with knobs FEATURES: - Machine frame: extra-rigid welded monoblock chassis Movable side work surface (X direction) Movable upper work surface (Y direction) Podpowf I Iajfx Adlepr Movement of each support is transmitted via a geared motor. This drives two trapezoidal screws of the appropriate size and equipped with a double chain sprocket (5/8"), a system that achieves the best possible parallelism for the movable supports. - Worktop height from floor: 60 cm - Maximum usable dimensions: 2400 x 1100 (H) x 700 mm - Minimum usable dimensions: 250 x 270 (H) x 250 mm - Maximum horizontal pressure: 1000 kg Positioning speed: 50 mm/sec - Maximum vertical pressure: 1500 kg Positioning speed: 45 mm/sec - Movement achieved by high-precision systems using AC motors. - Power supply: 400 V. Three-phase 50 Hz IN 6 A Installed power: 4 kW - CE marked - Lockable disconnect switch, mushroom stop Dimensions in operating order: x x h. mm Space required around the machine for movement and work: m Transport dimensions (LxWxH): x x h.m Weight: Kg Machine supplied with its manual, spare parts list, and diagrams. Machine serviced, brought into compliance, with quality control and dynamic functional testing. With a 3-month warranty and certificate of compliance. Available from stock, subject to prior sale.

Condition: new, - New -Description:- Top equipment for high productivity in a small space!- Intuitive operation with the eye-S control and 10"large touch screen: HMI Maestro Active Edge,Graphic display of all machining units and theiroperating status, Graphic simulation of machining operations,Control of all machining units, Regulationof glue tank temperature, Assistance functionsfor setting up the machine according to the machining program,Fault diagnosis for quick elimination of simple errors,Statistics on machining parameters, USB connection,Preparation for network connection, Preparation for Industry 4.0with data transmission protocol API REST- Excellent accessibility to the working aggregatesthanks to the large hood that ensures protection and noise reduction- Monoblock construction made of steel ensures high stabilityand rigidity of the machine- Automatic aggregate positioning when changingthe panel thickness- Automatic application of the strip edges with edge magazine(me 35 t s): The strip edges of solid wood areautomatically loaded and synchronized with the panel guide- Panel feed is made by feed chain with rubber glides- Extendable workpiece support- Adjustment of the infeed ruler via spacer platesTechnical data:Dimensions and weightsLength approx. 3314 mmHeight approx. 1300 mmWidth/depth approx. 1085 mmWeight approx. 545 kgflush radius milling unitflush radius milling unit input power 2 x 0,35 kWflush radius milling unit cutter speed 12000 min¯¹flush radius milling unit cutter diameter HM 55.3 mmFlush radius milling unit suction port diameter 2 x 60 mmElectrical dataSupply voltage 400 VMains frequency 50 HzGlue unitGlue tank input power 0,25 kWGlue tank suction port diameter 60 mmGlue tank working temperature 190 °CGlue tank filling quantity 0.8 kgPneumatic connectionOperating pressure 6.5 barAir consumption 470 l/minFeed rateFeed input power 5 kWFeed speed 7 m/minEdgesEdge thickness roll material 0.4 - 3.0 mmEdge thickness strip material - 5.0 mmPre-milling unitPre-milling unit input power 3 kWPre-milling unit diamond cutter diameter 80 mmPre-milling unit material removal ,5 / 2 mmpre-milling unit cutter speed 7200 min¯¹pre-milling unit cutter height 56 mmpre-milling unit exhaust diameter 2 x 80 mmscraper unitradius scraper 2 mmbuffing unitbuffing unit input power 2 x 0,14 kWbuffing unit speed 2800 min¯¹workpieceworkpiece thickness 8 - 50 mmworkpiece width min. 110 mmWorkpiece length min. 120 . 5507235 Ppedpfxsvwfmlj Adler

Condition: used, Year of construction: 2018, Are you in search of a bridge type milling machine? With X-travels ranging from 2-15m, Y-travels up to 4m, and Z-travels up to 2m, we offer a versatile selection of machines to meet various machining requirements. Whether it's CNC universal heads, W-axis, rotary table, tool changer, or controls from renowned manufacturers such as Siemens, Fanuc, and Heidenhain, our extensive range of accessories allows for maximum flexibility and efficiency. Take a look at the PDF catalog below! Discover the ultimate precision and robustness of our refurbished CORREA portal milling machines, meticulously restored by our experts in Spain. These machines have been meticulously inspected and tested according to the highest standards, guaranteeing top-notch machining quality. An outstanding example is our used CNC portal milling machine VM 2018, equipped with the proven Heidenhain control. With impressive performance data and detailed technical features, this machine has everything you need for precise and efficient machining. x-travel: 2300 mm y-travel: 2000 mm z-travel: 1000 mm Table size: 2300 x 1600 mm T-slots (width x spacing x number): 8x 22 x 180 mm max. table load: 8 t Distance between columns: 1840 mm Distance between spindle nose and table: 180~1180 mm Spindle motor: 22/46 kW Spindle torque: 140.1/286.5 Nm (S6-25%) Spindle nose: 50 SK Ppodpfjhx R Dkex Adlor Spindle speed: 10000 (direct) rpm Rapid traverse X, Y: 20000 mm/min. Rapid traverse Z-axis: 15000 mm/min Milling feed range: 1~10000 mm/min Machine size (LxWxH): 7027 x 5217 x 4339 mm Total power requirement: 60 kVA Machine weight approx.: 25 t CNC control: Heidenhain TNC 620 Chip conveyor with chip container: 2 pcs spiral, 1 pc hinge belt Through-spindle coolant: 20 bar CE version: Certified by TUV Used CNC portal milling machine with HEIDENHAIN 620 TNC control and extensive accessories, featuring: - Monoblock cast iron machine bed and monoblock crossbeam provide highest rigidity for precise machining results. - The entire structure has been optimized for rigidity and precision through FEM analysis. - P-class feed roller linear guides allow maximum load capacity with a lower friction coefficient (0.003-0.006). They ensure smooth operation through optimized roller circulation and guidance, reducing energy consumption. - The double-nut C3 ball screws ensure precise milling even for heavy loads. - Spindle direct drive with 10,000 rpm and SK50 tool holder. - Spindle motor power 22/46 kW (S6-25%). (22 kW continuous power, 46 kW for 30 minutes overload) - Spindle torque corresponds to 140.1/286.5 (S6-25%) Nm - Two spiral conveyors and one chain chip conveyor effectively remove chips. All essential components are sourced from reputable manufacturers in Europe, ensuring reliable, short-term, and long-term availability of spare parts. Don't miss the opportunity to optimize your production processes and invest in high-quality milling technology. Experience the difference that our portal milling machines offer - reliable, durable, and ready to tackle your most demanding tasks. Contact us today and let our experts guide you.

Condition: new, Year of construction: 2025, turning length: 2,000 mm, turning diameter: 660 mm, center width: 2,000 mm, CNC Cycle Lathe FTL660-2000 – Heavy-Duty Machining with Precision The FTL660-2000 from the FLASH series by GreMaT is a powerful CNC cycle lathe specifically designed for heavy-duty cutting applications. Featuring a 500 mm wide machine base, a solid monoblock cast bed, and flexible spindle options, it delivers maximum stability and precision for the most demanding turning operations. Combined with the Siemens 828D control, the machine stands out for its ease of operation, short setup times, and high process reliability—ideal for manufacturing companies that prioritize productivity and dependability. FTL660-2000 Highlights • Immediately available – secure your machine directly from stock (otherwise approx. 6 months delivery time). • Robust & massive – 500 mm wide machine bed and monoblock construction for maximum rigidity. • High flexibility – spindle bores up to Ø120 mm, various speed ranges. • Heavy-duty linear guides – stable and durable even with large workpieces. • Centrally mounted ball screw – higher precision, reduced wear. • Versatile tooling concept – 4-station tool post, 8-station turret, or gang tooling. Key Technical Data (Excerpt) • Max. swing over bed: Ø700 mm • Max. swing over cross slide: Ø480 mm • Max. workpiece length: 2000–3000 mm (depending on configuration) • Spindle bore: Ø120 mm • Bar capacity: Ø110 / Ø135 / Ø162 mm • Spindle nose: A2-11 • Spindle speed: 1000 / *800 rpm • Spindle motor: 15 / *18.5 kW Podpjw T Ttvofx Adlopr • Tool positions: 4+2, *8+2 • Tailstock: manual or hydraulic, travel 100 mm • Bed width: 500 mm • Weight: approx. 7,600 kg Equipment includes: • Siemens 828D control + CTB driver + CTB motor • 15'' display, ShopTurn function • Taiwan linear guide + ball screw • A2-11 belt-driven spindle, max. speed: 1000 rpm • Spindle bore: φ120 mm, through hole: φ110 mm • Main servo motor with 22/30 kW • 15-inch Taiwanese hydraulic hollow chuck + hollow cylinder • 12-station servo turret, 100 mm center height • MT5 hydraulic tailstock • Manual steady rest (circular) • Air-conditioned electrical cabinet • Electronic handwheel • Automatic lubrication system • Automatic coolant system • Three-color warning light • Work light • USB and Ethernet connectivity • Foundation pads • Tools and toolbox • CE certificate Experience it live at EMO 2025! See the CNC cycle lathe FTL660-2000 live at EMO 2025. Experience its robustness, precision, and performance first-hand—and secure your production edge. 👉 Get your free EMO tickets now and schedule a personal appointment! Why choose the FTL660-2000? ✅ CNC cycle lathe with high machining capacity ✅ Immediately available—or approx. 6 months lead time for new orders ✅ Siemens 828D control for intuitive operation ✅ Ideal for heavy-duty machining of large workpieces ✅ Solid cast machine bed with integrated recirculating ball screw for increased rigidity and stability

Condition: used, Year of construction: 2018, travel distance X-axis: 2,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,000 mm, table length: 2,300 mm, table width: 1,600 mm, spindle speed (max.): 10,000 rpm, spindle nose: SK 50, Used CNC portal milling machine KRAFT VM-2018B with Heidenhain TNC 620 Year of manufacture: 2018 Storage location: Germany Delivery time: short term Payment: 100% before loading Warranty: none Machine description The KRAFT VM-2018B is a precise and powerful CNC portal milling machine with HEIDENHAIN TNC 620 control, ideal for heavy-duty and high-precision machining processes. Thanks to its robust design and high-quality components, it is ideal for demanding milling tasks in tool and mold making as well as in series production. Highlights & features Monoblock cast iron bed and cross beam for maximum rigidity and precision FEM-optimized machine design BF gearbox with 26 kW motor for high torque (662 Nm) Feed roller linear guides P-class (very low coefficient of friction 0.003-0.006) C3 ball screws with double nut - high load capacity & accuracy Spindle: SK50, 10. 000 rpm, direct drive Heidenhain TNC 620 control Spindle cooling & IKZ 20 bar Coolant system, oil separator, air conditioning for control cabinet Full enclosure, TÜV-approved, CE-compliant Ppedpfx Adswkg T Sslor Technical data Travel (X/Y/Z): 2,300 / 2,000 / 1,000 mm Table size: 2,300 × 1,600 mm T-slots: 8 × 22 × 180 mm Max. Table load: 8 t Distance spindle nose - table: 180-1,180 mm Rapid traverse X/Y: 20,000 mm/min Rapid traverse Z: 15,000 mm/min Feed range: 1-10,000 mm/min Positioning accuracy (VDI/DGQ3441): 0.020

Condition: used, Technical details Speed: 6000 Bottles/hour Products: Wine (Still) Containers: Glass, PET Formats: 0.187 L PET bottle Safety features: Yes Manuals: Yes Fill type: Gravity/light depression Neck type: 22 mm Consisting of:  - Conveyors Conpart The line ensures seamless movement of bottles using conveyors with suction systems, stabilizing each bottle while maintaining a nominal capacity of 7200 bottles per hour.  Filling Monoblock Euro Star LDG24-24-4V, Year 2014 - Operates with a rinser / blower equipped with 24 clamps, enabling a secure grip on the bottle neck. The injection system prevents fluid flow when bottles are absent. - Fills wine using 24 stainless steel spouts, which manage slight vacuum and inert gas overpressure to maintain ideal filling conditions. As a result, the conical-bottomed tank ensures complete product discharge at the end of each cycle. Labeling Machine Conpart Arco M25, Year 2024 Ppedpfsxyt Ifjx Adlsr - suitable for cylindrical PET Bordeaux bottles of 0,187 liters and advances them using a screw feeding system, it applies labels with minimal waste. - suitable for self-adhesive labels and smooths them with foam rollers controlled by an electronic system. 

Condition: used, with 6 heads; the monoblock consists of: - capsule dispenser: - capsule pre-and cripmer Ppedpfx Adjxyttzsljr Capsule type: champagne cap folding, champagne cap applicator capacity / hour ca.: 5000 working direction: rotating turret, right-left (CCW) Working type: fullautomatic

Condition: excellent (used), Year of construction: 2017, operating hours: 1,500 h, functionality: fully functional, machine/vehicle number: 17434268, type of input current: three-phase, input voltage: 400 V, electrical fuse: 63 A, input current: 61 A, input frequency: 50 Hz, pressure: 18 bar, stack height: 1,900 mm, total length: 1,600 mm, total width: 750 mm, tank capacity: 410 l, empty load weight: 315 kg, type of cooling: water, Machine Description and Technical Data 2.1 Machine Description The RED COMPACT units are delivered fully pre-assembled and require only electrical connection and hydraulic hookups on site. Main Components: A: Self-supporting frame with stainless steel cladding (panels 1–6 removable) Ppodpfxexvca As Adljr B: Basin with evaporator C: Condenser unit D: Temperature controller E: Control cabinet F: Hydraulic circuit with pump (second pump optional) 2.2 Structure The compact monoblock housing contains all components necessary for operation. The external cladding is made of stainless steel; individual panels can be removed for maintenance purposes. 2.3 Basin The stainless steel basin houses the evaporator block. It is insulated with high-density polyurethane foam. A blower ensures water circulation within the basin. 2.4 Condenser Unit The condenser unit can operate with either cooling tower or well water, depending on order specification. It supplies the evaporator block and is located beneath the basin. 2.5 Temperature Controller The controller is a modern microcomputer with a high-resolution display and LED indicators for operating status. The control system is programmed to offer maximum operational safety with easy user operation. 2.6 Control Cabinet The control cabinet is dust- and splash-proof. It contains: - Main and emergency switch - Contactors, thermal relays, fuses - Safety transformer for control circuits Access is provided by removing panel 1 below the temperature controller. 2.7 Hydraulic Circuit with Pump Panel 3 is removed for connection. The following connections are provided: A – Water make-up (T1): Connection to water supply; fill level is controlled via float valve. B – Return line (T2): Return flow from the consumers. C – Overflow (T3): Connection to the process wastewater outlet. D – Chilled water outlet (P1): Supplies the consumers; open the shut-off valve before commissioning. A second pump (P2) is available as an option. E – Condenser water supply: The shell-and-tube condenser can be operated with well water or cooling tower water: Scheme A – Well Water: Use the small connections C1, C2 (inlet and outlet). The large connection remains closed. A pressure-regulated valve control can be installed as an option. Scheme B – Cooling Tower Water: Use C3 and C1/C2 in parallel to increase the flow cross-section. It is recommended to install a mechanical filter at the water inlet to prevent contamination. Manufacturer: FIC S.p.A. – Via Trivulzia 54, 23020 Mese (SO), Italy Model: RED COMPACT V.7

Condition: excellent (used), Year of construction: 2013, operating hours: 64,269 h, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,000 mm, table length: 2,300 mm, table width: 1,600 mm, spindle speed (max.): 20,000 rpm, overall weight: 30,000 kg, For sale is a well-maintained Parpas Diamond Linear. – C-axis (milling head): (degrees) +/- 370 – A-axis (milling head): (degrees) +/- 105 Distance between columns: (mm) 2,700 Distance between table surface and spindle nose with milling head mounted, max.: (mm) 1,220 – X and Y axis rapid traverse: (m/min) 60 – Z axis rapid traverse: (m/min) 40 Spindle: 5-axis orthogonal milling head – Internal coolant supply (ICS): (bar) 20 – Maximum spindle speed: (rpm) 20,000 – Drive power S1 / S6: (kW) 29 / 37 – Torque S1 / S6: (Nm) 92 / 115 Tool magazine – Tool holder: HSK 63 A – Tool positions: 42 – Tool diameter: (mm) 80 – Tool length: (mm) 350 Ppedpfxoxxvp Ns Adlsr – Tool weight: (kg) 6 Machine table – Table size L x W: (mm) 2,300 x 1,600 – T-slot spacing: (mm) 200 – T-slot dimensions: (mm) 22 – Max. workpiece weight: (kg/m²) 6,000 FEATURES & EQUIPMENT + Heidenhain iTNC 530 control + Portal (gantry) design: U-shaped "monoblock" construction with one crossbeam and stationary workpiece + Milling head (A- and C-axis), A-axis with torque motor and hydraulic clamping, A-axis positioned perpendicular to the C-axis + No foundation required + Glass scales in X, Y, and Z linear axes + C-axis with Heidenhain angle measurement system, resolution 0.001 degrees + Heidenhain HR 520 electronic handwheel + 2 chip conveyors (one at the front and rear of the table) + Internal coolant supply (ICS) 20 bar + Paper filter unit + Sliding roof with opening for loading and unloading

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 250 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 300 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: FANUC, workpiece diameter (max.): 32 mm, rotational speed (min.): 500 rpm, rotational speed (max.): 30,000 rpm, overall weight: 1,700 kg, spindle nose: HSK-E40, number of slots in tool magazine: 48, tool length: 95 mm, tool diameter: 63 mm, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, WILLEMIN MACODEL W408 MT Pedpfjwu Ruhjx Adlepr TECHNICAL CHARACTERISTICS : Year : 2007 CNC control : FANUC 16i-MB Number of axes : 5 Stroke X axis : 250 [mm] Stroke Y axis : 200 [mm] Stroke Z axis : 300 [mm] Traversing feeds X, Y and Z axes : 30000 [mm/min] Max. bar diameter in turning spindle : 32 [mm] Main spindle max. speed : 6000 [rpm] Main spindle max. power : 3.7 [kW] Angular C axis stroke : 360 [°] B axis swivelling stroke : 115 [°] Spindle type : HSK-E40 Min. spindle speed : 500 [rpm] Max. spindle speed : 30000 [rpm] Spindle power : 10 [kW] Tool changer magazin number of stations : 48 Max. tool lenght : 95 [mm] Max. tool diameter : 63 [mm] Lubrication tank capacity : 80 [l] Collant pump flow rate : 40 [l/min] Rated current : 25 [A] Supply voltage : 400 [V] Weight : 1700 [Kg] EQUIPMENT INCLUDED : x1 0-90° pivoting backworking unit (6th side machining) x1 backworking vice x1 RENISHAW TS27R tool probe x1 RENISHAW NC4 TX laser system for tool setting and tool breakage detection x68 type F35 turning collets x9 HSK-40E milling/turning attachments x1 IEMCA BOSS 332 E bar feeder x1 spindle chiller x1 cutting fluid chiller x1 ELBARON mist extractor x1 3-colour status lamp x1 CO2 automatic fire extinguishing system (to be checked by the purchaser with a competent body) x1 set of technical manuals Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. HERMLE , DMU , monoblock , variaxis , chiron

Condition: used, Year of construction: 2020, Monoblock for rinsing, filling and capping glass bottles. 1. Rinser: Rinsing tower with 6 grippers for single-stage rinsing of empty bottles. 2. Filler: Filling tower with 6 electro-pneumatic backpressure valves. 3. Capping machine: Stainless steel cap container with cap conveyor and capping head 4. Bottle exterior washer Additional title: Counterpressure filler with 6 filling valves, sealer with one sealing head Capacity: 1100 bo/h referring to 0,33 l bottles Filling temperature: 2 °C Length: 2,20 m Width: 1,90 m Height: 2,10 m Formats: Euro 0.5 l and 0.33 l; 26 mm crown caps Running direction: clockwise Operation / Control: Schneider Electric Base construction: Monobloc; Stainless steel housing on feet with plexiglass doors Features: Rinser with 6 grippers, filler with 6 filling valves, capper with one capping head, bottle exterior washer, beer pump, free bottle transport Ppodsw Tbgdspfx Adljr

Condition: new, Parallel lathe with display Fervi T075/400V3A. Monoblock cast iron base. Height of Centers 230 mm Max. diameter on Bench 460 mm Max. diameter on Carriage 270 mm Max. diameter on Slot 690 mm Tool Height 25 mm Distance between Centers 1500 mm Distance between Guides 300 mm Bar Taper CM MT7 Bar Passage 58 mm Spindle Attachment Camlock D1-8 Spindle Speed (12)25-1700 rpm Longitudinal Feeds (42) 0.031 - 1.7 mm/rev Cross Feeds (42) 0.014 - 0.784 mm/rev Podpfx Adevbqv Helepr Metric Threads (41) 0.1 - 14 mm Inch Threads (60) 2 - 112 TPI Tailstock Spindle Stroke 130 mm Tailstock Taper CM MT4 Motor 400 V 50 Hz 5.5 kW Coolant Pump 400 V 50 Hz 90W Machine Dimensions 2750 x 1080 x 1370 mm Net Weight 2020 kg Total Dimensions 2870 x 1180 x 1570 mm Gross Weight 2200 kg Accessories Included: 3-jaw self-centering chuck Ø250 mm / D1-8 4-jaw self-centering chuck Ø300 mm / D1-8 Drive flange Ø350 mm Fixed steady rest Moving steady rest Reduction bushing CM 7 / 4 Fixed tailstock CM 4 Rotary tailstock CM 4 Thread comparator Turret guard Spindle guard Rear splash guard Quick change turret type B LED lamp Cooling system Electromechanical foot brake Bathed carriage gears oil Quick-lock tailstock carriage

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, machine/vehicle number: AB00021322, total width: 1,820 mm, total height: 1,960 mm, total length: 1,650 mm, working width: 1,100 mm, overall weight: 1,160 kg, power: 11 kW (14.96 HP), grinding belt length: 1,900 mm, workpiece height (max.): 170 mm, grinding belt width: 1,115 mm, input voltage: 400 V, - The calibrating and fine sanding machine LIBRA 35 is an extremely versatile machine suitable for a wide range of applications. - Robust, tube-reinforced monoblock steel frame with high-mounted working units for maximum rigidity. - User-friendly due to a clearly arranged control panel on the front side. - Motorized table height adjustment. - Digital display for working height. - Electronically controlled sanding belt oscillation with reduced compressed air requirement. - Automatic star-delta start-up for the main motor. - Natural rubber feed belt with negative profile. - Feed table with two rollers at the infeed and outfeed of the feed belt. - Belt feed driven by geared motor with two speeds. Podpfx Aswwkuysdljpr - Flexible steel pressure bar before the first unit. - Rubber pressure rollers before and after each working unit. - Pneumatic belt tensioning per unit with decimal correction option for grit/band thickness.

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: WATERYIME, Automatic chemical preparation and dosing unit, designed for continuous industrial applications in treatment plants and environmental processes. *Tank capacity: 500 liters *Dimensions: 1405x920x1800mm *Configuration: compact monoblock unit. The equipment is designed for automatic chemical solution preparation in a 500L tank, controlled dosing into the process, continuous operation, and integration into existing treatment lines. Ppjdpeym Aitjfx Adljr Applicable for poly-electrolyte dosing, dosing of flocculants and coagulants, neutralization processes, recycling plants, chemical and environmental industries.

Condition: like new (used), Year of construction: 2025, Tube Bender BB 76 without mandrel with one set of tooling 76 mm radius 275 mm with counter rollers - model BB 76 - capacity up to 76 x 4 mm round tube mild steel - digital readout - bending angle programable - with foot pedal - bending speed 1 - 3 rpm Ppjdpfxjdihnue Adljr - stepless speed - motor 4 KW 400 volt 50 hz 3 ph. - all shafts and necessary parts are heat treated and grinded - monoblock body CK 45 - weight 600 kg - dimensions 600x1100x1000 mm

Condition: as good as new (ex-display), Year of construction: 2024, machine/vehicle number: BB 60, Tube Bender BB 60 Ppjdpfsd Eywyox Adler without mandrel with one set of tooling 60 mm radius ca. 175 mm with counter rollers - model BB 60 - capacity up to 60 x 3,6 mm (mild steel) round tube mild steel - digital readout - bending angle programable - with foot pedal - bending speed 1 - 3 rpm - stepless speed - motor 3 KW 400 volt 50 hz 3 ph. - all shafts and necessary parts are heat treated and grinded - monoblock body CK 45 - weight 400 kg - 400 volt 50 Hz 3 ph.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 109, briquette diameter: 80 mm, overall weight: 1,450 kg, TECHNICAL DETAILS Briquette type Briquette diameter: 80 mm Motor power: 11 kW Production output: 80 - 210 kg/h Machine performance Cycles per minute: 7 Number of cylinders: 3 Max. discharge length: 70 mm Container Ring diameter: 1,200 mm Container capacity: 1 m³ MACHINE DETAILS Dimensions and Weight Dimensions (L x W x H): 2,100 x 1,350 x 1,600 mm Weight: 1,450 kg Electrical Data Supply voltage: 400 V Frequency: 50 Hz Max. material moisture: 15 % Ppjdpfx Adexyi Ihjljr EQUIPMENT Hydraulic oil machine Monoblock clamping system Capacitive sensor for automatic operation Viewing window End-of-cycle system Electronic pressure gauges for pump and clamping pressure Siemens touchscreen PLC Siemens display Operating hours counter Inductive limit switches LED machine position indicator Stamping unit Preheating system Oil level and temperature sensor Preparation for oil cooling in tank and material outlet Power stabilizer Service tools

Condition: like new (used), HEMA monoblock filler with ZALKIN capper for PET bottles. This type of machine is suitable for dosing the following products: mustard, baby food, sauces, pastes, jams, etc., whether containing particulates or not. These machines are equipped with filling devices specifically designed for dosing viscous products. The HEMA filler operates in two key phases: suction and filling. These phases alternate continuously to ensure fast and accurate filling. The ZALKIN capping machine is engineered for placing and sealing aluminum screw caps—deformable or non-deformable (for carbonated or non-carbonated beverages)—as well as screwing aluminum or plastic caps, or applying snap-on or floating closures. The system is compatible with bottles made of glass, plastic, or metal, in various shapes. Output varies according to product type, container format, and fill volume, with a maximum output of up to 6,000 bottles per hour (120 bottles/min). Includes: - Cap feeder - Infeed conveyors - Discharge belts - Control panel - Automatic CIP cleaning system - Cylindrical filling valves - Heated-jacket pistons - Adjustable volume control for container size and filling capacity - Steam sweeping in the capper with vacuum closure - Schneider automatic touchscreen interface Psdpfxoynkdzj Adljpr - Elevating bottle carrier

Condition: used, Year of construction: 2010, travel distance X-axis: 3,020 mm, travel distance Y-axis: 1,520 mm, • Monoblock structure in welded steel with a mobile gantry in steel. • Processing speed up to 18 m/min. Ppsdpfxsxxii Aj Adlsr • Worktable: fixed table made of high-thickness aluminum profiles. • Hardened linear guides and preloaded ball-bearing carriages. • Transmission via precision ball screws on all 3 axes. • CN7000 numerical control with touch screen and brushless servo drives. • Available in 5 sizes for maximum flexibility. • Z 350 option for 3D applications. • Quality and performance suitable for good productivity. • Well-known ease of use. • Compliant with European safety regulations. • Numerous options: brushless servomotors, micro-lubrication, automatic tool changer, vacuum table (with turbine or vacuum pump), high-frequency spindles, contact engraving spindles, fourth axis.

Condition: used, Year of construction: 1998, Hot-melt Case Sealer – Overview This used hot-melt case sealer by TE-CO is engineered for end-of-line industrial packaging within a used bottling line. The model 607-98 provides reliable, consistent closure of corrugated cartons using a hot-melt adhesive system, making it a proven solution for beverage production environments where wine bottles in cases must be sealed securely prior to palletizing. With robust construction and straightforward operation, it integrates seamlessly with upstream case packers and downstream palletizers to support continuous operation and optimized throughput. Manufactured by TE-CO, this second hand unit focuses on dependable carton closure, ensuring clean glue application, tight seals, and minimal maintenance demands. It is especially suitable for cases containing glass bottles in common formats used by wineries and beverage producers. Designed to work as part of a complete used bottling line or as a stand-alone machine with compatible conveyors, the 607-98 aligns with industrial packaging best practices for efficiency and product protection. Technical Specifications & Performance Data Manufacturer: TE-CO Model: 607-98 Year of manufacture: 1998 Sealing method: Hot-melt (glue) adhesive Application: Case/carton sealing after case packing Typical use: Wine bottle cases within a used bottling line Compatible bottle formats in cases: 0.75L, 1.0L, 1.5L Construction: Industrial end-of-line machine for continuous operation Operation: Inline with case packer upstream and palletizer downstream Advanced Automation & Control Systems The TE-CO hot-melt case sealer is designed for dependable automation in industrial packaging. Typical features include adhesive temperature control for consistent bonding, synchronized infeed and outfeed for smooth case flow, and safety interlocks for protected operation. Operator-friendly controls support quick adjustments and stable performance during format changes. The hot-melt application system helps deliver clean, repeatable glue patterns to ensure secure, uniform sealing. Production Line Integration Capabilities This case sealer integrates naturally into a used bottling line, operating immediately after a case-packing monoblock and before palletizing. It can be synchronized with upstream equipment such as erecting and packing systems and connected downstream to palletizers for automated material handling. The machine supports inline operation with standard conveyors and can run as a stand-alone sealer when properly fed. Machine Condition & Maintenance History The machine is presented as ready for operation within a second hand used bottling line context. Safety features and documentation are available, supporting commissioning and routine maintenance. Its industrial build promotes reliable service in beverage production environments. Podpfx Adexywf Ijljpr

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 59800 € 1130.22 € 100 to 400 mm 800 x 500 mm 500 mm 110 mm/s 10 mm/s 160 mm/s 11 kW 1900 mm 1700 mm 2930 mm 5500 kg 250 bar Welded monoblock frame Cylinders hardened and chrome-plated 2 auxiliary cylinders and 2 round guides T-slots can be configured according to customer requirements Pump, valves, and filters from Bosch Rextroth Hydraulic overload valve Hydraulic proportional valve Cooler Siemens electrical components 8 additional signal inputs and outputs 7-inch touchscreen Siemens S7 PLC Pedewmwvcjpfx Adlepr Stroke, pressure, speed, and dwell time adjustable via the PLC Remote maintenance access Sick light guards Safety covers Safety PLC from Siemens or Sick Category 4 sensors and photoelectric switch Two-hand control panel Reset and emergency stop buttons Equipped according to CE regulations

Condition: used, Used Bottling Line KRONES for Glass Bottles up to 20000 bph Introduction to the Bottling Line KRONES Initially, the used KRONES bottling line for glass bottles is highly sought after in industrial settings due to its reliability and efficiency. Comprising a range of top-tier components, the Complete Bottling Line KRONES ensures seamless performance, effectively meeting the stringent demands of high-volume production. Pjdjvgvwmjpfx Adlspr Main Components Firstly, the KRONES K-131-669 filling monoblock, manufactured in 2016, stands as the centerpiece of the Complete Bottling Line KRONES. Capable of handling a remarkable 20,000 bottles per hour, it is complemented by the 1998 KRONES 472-072 depalletizer and the 2000 Gronemeyer RINSER 8983-400-4. Consequently, this collective setup facilitates a smooth and uninterrupted workflow from bottle unloading to the filling process in the Complete Bottling Line KRONES. Quality Control of the Used Bottling Line KRONES Maintaining product quality is paramount in any bottling operation. Therefore, the 1999 KRONES CHECKMAT inspector plays a pivotal role in this regard in the Complete Bottling Line KRONES. With advanced functionalities encompassing not only level control but also meticulous label inspection, it ensures that every product meets the desired standards. Furthermore, the 2000 ACI TA20 2 AE bottle dryer guarantees that bottles are impeccably prepared for subsequent labeling and packaging stages, effectively eliminating any potential issues that may arise from moisture. Labeling and Packaging Efficient labeling and packaging are essential components of the KRONES bottling line. Consequently, the 1999 KRONES STARTMATIC K-080-669 excels in these areas. With precise label application capabilities, coupled with the ability to print directly onto glass bottles, it not only streamlines operations but also elevates brand presentation in the Used bottling line KRONES for glass bottles up to 20000 bph. Complementing this is the 1999 SMI SMI/7507 case packer and the 1997 FRANPACK Typ 121971214 pallet wrapper, ensuring that products are securely packaged and ready for distribution. Operational Status and Specifications The KRONES bottling line is in flawless working condition, and meets the demands of modern production environments. With a remarkable throughput of 20,000 bottles per hour, the line promises to enhance operational efficiency while maintaining product quality. Specifically designed for glass containers and primarily catering to beer production, it guarantees precise and consistent fills, ultimately resulting in superior product quality and customer satisfaction. In summary, the KRONES bottling line represents a sound investment for businesses seeking to optimize their bottling operations. With its robust construction, cutting-edge features, and proven track record, it is poised to deliver exceptional performance and elevate production standards to new heights.