Used Cellpath Cellpath Heat Block for sale (17,985)

Year of construction: 2014, operating hours: 59,436 h, condition: ready for operation (used), functionality: fully functional, Buderus Loganova EN20 CHP unit – 19 kW electrical / 38 kW thermal – Year of manufacture 2014 For sale is a combined heat and power (CHP) unit from the manufacturer Buderus, type Loganova EN20, from a commercial property in Stuttgart. The unit will be decommissioned as part of an upgrade to the energy supply. Technical data: * Manufacturer: Buderus * Type: Loganova EN20 * Year of manufacture: 2014 * Electrical output: 19 kW * Thermal output: 38 kW * Operating hours: 59,436 h * Start cycles: 6,031 * Maintenance: Premium maintenance contract since commissioning Condition of the unit: The unit starts and runs up properly. Currently, there is a fault in the heat exchanger. According to initial assessment, the heating water pump is defective. The CHP unit is currently out of service. Location & Availability: Location: 70567 Stuttgart Planned decommissioning / dismantling: June–July 2026 Note: Laodpfx Aozd Uhhol Nec Regularly maintained unit with documented service history. Sale due to a unit upgrade. Inspection possible by appointment. If you are interested, we will gladly send you further information and photos.

Condition: excellent (used), Large size blastroom for surface preperation and finishing large workpieces 4 shotblasting units Laedpfx Ajygk S Nsl Njc Filtration system NEON Lightning 250 W Automatic front door Service door in BMS System Smooth control by means RACK system 2 Abrasive operator system 2 Opperator platform with basket 2 Magic Blast Controllers 4 ACF Shotblasters SV206 with 205Liter Schneider MAGELIS opperator display control panel Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), I'm selling a Heraeus T 5042 EK search engine Lasdpfxju Udp Ij Al Nsc

Condition: good (used), fan heater, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating register Lajdpfxou Scqbo Al Njc -Manufacturer: Kampmann, air heater heat exchanger with attachments -Type: Top 4000 2-stage 153000452036 -Power: 20.3/23.3 kW -Operating pressure: max 10 bar -Number: 2x air heaters available, 1x with additional bracket -Price: per piece -Dimensions: 700/680/H1020 mm / 700/680/H900 mm -Weight: 45 kg / 40 kg

Condition: good (used), functionality: fully functional, input voltage: 220 V, total width: 379 mm, total length: 450 mm, total height: 850 mm, input frequency: 50 Hz, DGUV certified until: 03/2027, Heating cabinet Temperature adjustable up to 90°C Lodovdktqopfx Al Noac Stainless steel design Simple technology Dimensions: 379 x 450 x 850 mm (W x D x H) Connection: 220V Used equipment Delivery service available Many other bakery machines in stock!

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, 1 used rapid steam generator ----- Manufacturer: LOOS, Gunzenhausen Type: DF 600 Capacity: 600 kg/h Thermal output: 400 kW Max. operating overpressure: 13 bar Water content approx.: 43 l Year of manufacture: 1996 Year of heating coil manufacture: 10 / 2023 Lsdpfxew I T Ivo Al Neac Equipped with Weishaupt gas burner, gas control section, control cabinet mounted on the boiler body, feed water pump, and the existing coarse and fine fittings.

Condition: used, This listing is for a second-hand DTG/DTF printer, the ‘Brother GTX 423Pro’ Items included: 1 x Brother GTX 423Pro with the following accessories: Includes Lotus Heat Press LTS 150B Slide Includes Schulze PreTreat maker 5 Meter readings: Total: Approx. 5,500 prints Condition: This listing is for a second-hand device, which may show signs of use (minor scratches or discolouration). The device has been tested for functionality A test print can be seen in the photo Packaging and shipping: You are welcome to view the device during our business hours. Please arrange an appointment for this! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. Lajdpfoy R Nmhjx Al Noc For further information, you are of course welcome to contact us directly.

Condition: used, Year of construction: 2023, Milk E-Heating System PHE Electric Heated water Vat with connected Plate heat exchanger to Heat up products such as milk, juice and similar products. This can be used for various applications were the product needs to be pre heated ie. Separation, Homogeniser, Cheese process, Heating Vat, etc. This comes with a fully modernised control panel and frequency inverter for the product pump. Make: DMUK Capacity: 1000-1000 L/h Temperatures: Regulated by the controls Ledpfxey E H Eqo Al Nsac Circulation Pump: Included Control Panel: Included VDF: Included Condition: Excellent

Condition: refurbished (used), The MALLDISON milk pasteuriser with a capacity of 1000 liters per hour is typically designed for efficient processing of milk, ensuring safety and preservation of quality through pasteurization. Here are some key features and aspects you might find relevant: - Functionality: The machine heats milk to a specific temperature for a set period, killing harmful bacteria while preserving essential nutrients. - Capacity: With a processing capability of 1000 liters per hour, it's suitable for medium to large dairy operations, allowing for high volumes of milk to be pasteurized quickly. - Design: Many pasteurisers feature a stainless steel construction for hygiene and easy cleaning. They often have insulated heating chambers to maintain temperature efficiently. - Control System: Modern machines often come with digital controls for precise temperature and timing adjustments, improving the reliability of the pasteurization process. - Safety Features: Look for built-in safety systems that can prevent overheating or pressure build-ups, ensuring safe operation. - Efficiency: The design often focuses on energy efficiency to reduce operational costs associated with heating. Divert Valve: Included Construction: Fully stainless steel skid amd stainless steel parts for the product Chart Recorder: Digital with Latest upgrade and test report in 2025 Balance Tank: Included Lajdpfx Asxzxwhel Njc Product Pump: Included Hot Water Pump: Included Heating: Self Heating with Built in Electric Elements Temperatures: Temperatures : 4-45-55-65-78(72) and out at 4 c Connection for Separator in line connection to Homogeniser Capacity: 500-1,200 L/h Available: Immediately

Condition: used, This listing is for the Thermo Scientific 1blck Drybath Standard 1 Includes 1 No 12 Block usually retailing around £60+ Laedpfxey Iw A Se Al Noc The unit is in full working condition and is ready for immediate release. The Thermo Scientific Drybath Standard 1-block is a laboratory dry bath/block heater designed to provide precise, controlled heating for a variety of sample tubes using a removable heat block. It’s widely used in molecular biology, biochemistry, and general lab workflows where incubation or heating of tubes at set temperatures is required.

Condition: used, This listing is for the Grant T100 12L Heating Circulating Bath The unit is in full working condition and is ready for immediate use Grant T100 12L Heating Circulating Bath – Stainless Steel Tank The Grant T100 12L Heating Circulating Bath is a robust, precise temperature control system combining the T100 Optima circulator with a 12-litre stainless steel tank. Ideal for laboratories requiring high stability and reliability for routine heating applications, it’s designed for use across many scientific disciplines. Key Features Temperature Range: +5 °C to 99 °C (cooling via immersion coil available) Capacities: 12 L Stainless Steel Tank: Durable, easy to clean, resistant to corrosion Temperature Stability: ±0.05 °C Temperature Uniformity: ±0.1 °C Heating Power: ~1.3 kW Lodpfx Aexhfyijl Noac Controller: Grant T100 Optima circulator

Condition: used, This listing is for the Thermo Scientific Precision CIR19 Heated Circulating Bath The unit is in full working condition and is ready for immediate use The Precision CIR‑19 is a robust and reliable lab tool tailored for high-precision temperature-sensitive workflows. Its strengths include excellent uniformity, precise digital control, safe operation features, and ease of maintenance. Whether you're incubating samples or performing delicate assays, it’s built to deliver consistent, reproducible results Overview & Applications The Precision CIR‑19 is a high-performance 19 L (5 gal) circulating water bath engineered for applications demanding strict temperature uniformity and control—think enzyme reactions, serological assays, or any sensitive method where thermal consistency matters. Key Features Perimeter-directed water flow for superior temperature uniformity. Coil-free internal design, making cleaning and maintenance a breeze. Microprocessor-based digital control, displayed via a monochrome LCD. Lasdpfx Alsxhfpws Njc Auto-on/auto-off timers and audible alarms, enhancing scheduling and safety. Low-fluid (dry-run) protection, guarding against overheating or damage. Hinged lid with extended height, ideal for accommodating taller labware. Supplied with a stainless steel gable cover, diffuser tray, and the quirky but useful rubber duck.

Year of construction: 2015, condition: repair required (used), For sale is an industrial water-to-water heat pump from CTA, model OptiHeat 1-65e Duo, with a capacity of 77 kW. Manufacturer: CTA Capacity: 77 kW Year of manufacture: 2015 Origin: Switzerland Lodpsxxlwvsfx Al Njac Note: One of the two compressors needs to be replaced. We have the correct replacement compressor available (brand new and unused): Type: Copeland Scroll ZP137KCE-TFD-455 Refrigerant: R410A Voltage: 380–420 V If you are interested or have any questions, we are at your disposal.

Condition: used, Crane hook, lifting clevis, bottom clevis for chain hoist Hook clevis, load hook DEMAG, 2-strand Suitable for PK10 Load capacity: 2000 kg Demag No.: 56236044, replaced by Demag No.: 64755304 For two load strands Chain nominal dimensions: 10.0 x 28.0 mm Chain pitch for 1 chain link: 28 mm Chain pitch for 11 chain links: 208 mm Wire thickness = nominal thickness: 10 mm Outer dimension, transverse: approx. 34 mm Ljdpfx Aljy Tptme Neac Inner dimension, longitudinal: approx. 28 mm Outer dimension, longitudinal: approx. 48 mm Self-weight: 6.6 kg Very good condition, from stock

Condition: new, Year of construction: 2026, We offer the KehrFix attachment sweeper in various versions, with widths ranging from 1.50 m to 4.00 m. If a specific attachment is required, this must be discussed separately (e.g., pallet fork attachment, bucket hook, or Euro attachment). This attachment sweeper is suitable for forklifts, wheel loaders, tractors, mini loaders, mini dumpers, and many other vehicles and machines! With various attachment parts for quick mounting on a wide range of vehicles, the KehrFix is the perfect tool for keeping larger areas clean. Laodpfeh T A Tnsx Al Nsc The KehrFix push sweepers are a professional choice for simple and effective sweeping and cleaning. The robust KehrFix was designed to perform these tasks quickly and thoroughly in all conceivable applications. KehrFix push sweepers are high-quality, durable, maintenance-free, and universally applicable sweeping systems.

Year of construction: 2021, condition: new, pressing force: 50 t, Here are the technical data of the offered machine: If the press does not exactly meet your requirement profile, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Technical data + information: hydraulic 50 T heating press for laboratories It is a lower piston press with an open height of 400 mm ram travel 300 mm heating platen capacity up to 250 degrees Laedpfjgrkigex Al Noc heating plate size 200x200mm weight about 1500 kg height 1950 mm hydraulics built in the press body Hydraulic tank with 100 l monitored vertical door for the press chamber pressure, position - and speed adjustable via SIEMENS S 7 1200 SIEMENS touch screen monitor with 9 inch Safety technology from SICK (C-press, hydraulic press, hydraulic press, laboratory press, laboratory) Are you looking for a custom-fit machine? Contact us for an individual offer. Our hydraulic presses are manufactured according to German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore our presses exceed the Canadian and European safety requirements, because they correspond in all points to the national Brazilian safety guideline NR 12, which is based on these. Our great strength is the special machine construction and the press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: as good as new (ex-display), Year of construction: 2023, pressing force: 120 t, table length: 600 mm, table width: 600 mm, Here are the technical data of the offered machine: Technical data + information: HB 2021-A-188, oil hydraulic double column press 120 T bottom piston heating press. - idle speed up to 40 mm/sec - Opening speed up to 40 mm/sec - Starting press speed 5-15 mm/sec - Table size/heating plate size 600 × 600 mm - ram size/heating plate size 600 × 600 mm - 2 heating plates, electrically heated, up to 250 degrees - as OPTION - total size approx. 2000 × 1000 × 2800 mm height - Oil temperature control - Automatic lubrication - Free positioning of the ram - SICK/LEUTZE light barriers 14,1 mm on front side - Circuit oil cooling - Pressure holding valve 0 to 1800 sec. - Rear monitored door - Pressure adjustment from 30 T to 120 T - Travel limitation either by pressure or position - Programming set-up mode, single stroke (adjustable via rotary switch) - Control panel permanently installed in cabinet wall - Two-hand operation - Machine body double painted - Signal light: red: alarm, yellow baking phase, green: ready - Heating plates with electric heating rods, up to max. 250 degrees - Assembly, commissioning, instruction against separate charge Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 1,600 kN Free ripping force max. 200 kN Pressure build-up time closed die steel to steel Max. 8 sec. Dimensions Max. Opening width per compartment 200 mm Stroke and min. opening per compartment 400/200 mm Table height above floor, without heating pl. 850 mm Height above floor (overall height) approx. 2.800 mm Hall height min. 3,500 mm Parallel deviation at 20 °C +/- 0.1 mm Deflection Determined at max. clamping force with 70 % occupancy ≤ 0.2 mm/m Total weight of the press without operating materials approx. 9 to Accessories: 4 HEATING PLATES 500 × 400 mm, max. heating capacity Equipped with temperature sensor 300 degrees Speeds Fast closing with 15 mm sec. Pressing speed 10 mm sec. Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 8 db(A) Number of pressing cylinders 1 pc. Operating pressure max. 240 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH gear pump approx. 48 L/min Oil volume approx. HLP 46 MW 300 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Automatic pressure readjustment after 5 % pressure loss Pressure stabilization for up to 1800 sec. Electrical system Main supply 400 V AC Control voltage Hydraulic pumps 24 V DC 24 V DC Frequency 50 Hz Connection hydraulic main motor 15 kW Total connection approx. without heating plates 19 kW ##### Laodpsk S Dt Tefx Al Noc If the press does not exactly meet your requirements, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Our great strength is special machine construction and press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, pressing force: 300 t, table length: 1,800 mm, table width: 1,100 mm, Vulcanizing Press – Manufacturer: Durendus – 300 t Heating Press – Table 1,800 × 1,100 mm For sale is a high-performance hydraulic vulcanizing press from the manufacturer Durendus with a press force of 300 t. The machine features large-format heating plates measuring 1,800 × 1,100 mm, a clear column spacing of 2,100 mm, and a stroke of 600 mm, making it particularly suitable for large-surface vulcanizing, laminating, and thermal pressing processes in industrial applications. ==== Technical Data & Information: Vulcanizing Press Durendus – 300 t Heating Press ==== General Details - Manufacturer: Durendus - Model: Vulcanizing Press - Design: Heating Press / Vulcanizing Press - Press force: 300 t - Machine weight: approx. 22,000 kg - Dimensions (W × D × H): approx. 3,800 × 1,870 × 3,600 mm ==== Working Area - Clear width between columns: 2,100 mm - Max. distance between heating plates: 800 mm - Stroke: 600 mm - Table height over floor (incl. heating plates): 800 mm ==== Table and Ram - Heating plate size: 1,800 × 1,100 mm - Table (lower), with T-slots: 2,100 × 1,100 mm - Ram with T-slots: 1,900 × 1,100 mm ==== Speeds - Approach speed: 150 mm/s - Working speed: 15 mm/s - Return speed: 150 mm/s ==== Hydraulics (Version 1) - Hydraulic unit: Bosch Rexroth Ljdpfjx Ap Itox Al Noac - Hydraulic pump: 105 l/min - Motor power: 22 kW ==== Hydraulics (Version 2) - Hydraulic unit: Duplomatic / Daikin Hybrid-Servo - Hydraulic pump: 130 l/min - Motor power: 15 kW ==== Control and Operation - Two-hand operation - Ram return via control button - Travel limit via Leuze measuring system and monitor ==== Features - CE certificate - User manual included ===== Vulcanization, rubber processing, plastics processing, lamination processes, large-format molding presses, thermal pressing procedures, heavy-duty applications Vulcanizing press, heating press, hydraulic press, large-format press, laminating press, molding press, thermal press, heavy-duty press, try-out press, tool tryout press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with Brazilian national safety standard NR 12, which is based on these directives. Our core strengths are special machine construction and press automation. We supply custom hydraulic presses at surprisingly competitive prices. We use components from leading European manufacturers for the hydraulic systems in our presses.

Condition: like new (used), Year of construction: 2023, total height: 2,500 mm, table height: 900 mm, pressing speed: 8 mm/s, pressing force: 50 t, overall weight: 2,900 kg, operating pressure: 250 bar, ram plate width: 498 mm, table length: 522 mm, table width: 522 mm, type of input current: AC, power: 10 kW (13.60 HP), input voltage: 400 V, distance table to ram: 600 mm, oil tank capacity: 130 l, operating speed: 8 mm/s, Equipment: safety light barrier, Vulcanizing Press – Manufacturer Hidrobrasil – 50 t Double Column Heated Press For sale is a hydraulic vulcanizing press from the manufacturer Hidrobrasil with a pressing force of 50 t, featuring a robust double-column design. The machine is equipped with electrically heated platens (approx. 522 × 522 mm), a maximum daylight opening of 600 mm, as well as precisely adjustable pressing and heating parameters. It is particularly suitable for industrial vulcanizing, laminating, and thermal pressing processes in continuous operation. ===== Technical Data + Information: Vulcanizing Press Hidrobrasil – 50 t Heated Press ==== General Specifications - Manufacturer: Hidrobrasil - Model: Vulcanizing Press - Design: Double Column Heated Press - Pressing Force: 50 t (500 kN) - Machine Weight: approx. 2.9 t - Overall Height: approx. 2,500 mm - Minimum Hall Height: 3,500 mm ==== Working Area - Max. Opening: 600 mm - Stroke / Min. Opening: 300 / 300 mm - Table Height above Floor (with heating platens): 900 mm ==== Table and Ram - Table Size / Platens: approx. 522 × 522 mm - Ram Size / Platens: approx. 498 × 498 mm - Number of Heating Levels: 1 ==== Forces - Free Stripping Force: 20 kN - Pressure Range: 8 – 50 t ==== Speeds - Idle Speed: up to 10 mm/s - Opening Speed: up to 40 mm/s - Pressing Speed: max. 8 mm/s ==== Hydraulics - Operating Pressure: max. 250 bar - Pressure Build-Up Time: max. 3 sec. - Pressure Accuracy: ± 5 bar - Main Pump: Bosch Rexroth Gear Pump approx. 26 l/min - Oil Volume: approx. 130 l (HLP 46) - Automatic Pressure Adjustment - Pressure Hold Time up to 3,600 sec. - Circulating Oil Cooling - Oil Temperature Monitoring ==== Heating System - 2 electrically heated platens - Temperature Range up to 200 °C - Thermally Neutral: 80 – 120 °C - Integrated Temperature Sensor - Insulated Platens ==== Control and Operation - Two-Hand Operation (adjustable or fixed) - Travel Limitation by Pressure or Position - Pressure Adjustment via Rotary Control - Signal Tower (Red / Yellow / Green) - Operation via Control Cabinet ==== Electrical - Main Supply: 400 V AC - Control Voltage: 24 V DC - Frequency: 50 Hz - Hydraulic Motor Rating: 7.5 kW - Total Connected Load: approx. 10 kW (without heating platens) ==== Miscellaneous - Sound Pressure Level: max. 78 dB(A) - Parallelism Deviation: ± 0.1 mm - Deflection: < 0.2 mm/m ===== Lasdpfjtwv S Njx Al Nsc Vulcanization, rubber processing, plastics processing, laminating processes, compression molding, thermal pressing methods, hot pressing, continuous operation Vulcanizing press, heated press, hydraulic press, rubber press, laminating press, forming press, thermo press, double column press, tryout press, tool try-out press Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer.

Condition: defective spare-parts repository (used), Year of construction: 2009, operating hours: 2,000 h, functionality: limited functionality, machine/vehicle number: 870420, Electrically heated recirculation oven. Control system is defective. Repair offer is available. The control system needs to be repaired and the seals need to be replaced. Dimensions: width 2700 x length 2500 x height 1200 mm. Usable volume: 7.4 m3. Steam chamber: 10 m3. Heating capacity: 180 kW. Maximum temperature: 600°C. Max. air volume flow: 5000 m3/h. The oven also features a car bottom for loading/unloading and a wide, split door. The oven has seen little use. It is currently dismantled and in storage. Lsdpfx Aexnx E Sjl Noac

Year of construction: 2007, condition: used, Circulation pump: Manufacturer Flaco Geräte GmbH, DE-33334 Gütersloh FZPII/D, Art. No. 4020 5780, Mfg. No. 01056 Lodpohq Ricofx Al Noac Performance: Pressure: 9.0 bar, Flow rate: 10 l/min 1-phase, 0.55 kW, 230 V/50 Hz 3.50 A, 1320 rpm, IP 55 Expansion tank: Manufacturer Reflex Winkelmann GmbH & Co. KG, DE-59227 Ahlen Reflex No. / Mfg./Serial No.: 06G05194002, prEN 13831 2000 Permissible operating temperature: -10/120°C, Max. continuous operating temperature of the diaphragm: -10/70°C, 1.5 bar initial pressure (factory setting/site setting), 3.0 bar permissible Operating overpressure, 18 liters nominal volume.

Condition: used, tank capacity: 250 l, total length: 1,490 mm, total width: 900 mm, total height: 1,730 mm, outer diameter: 790 mm, wall material: stainless steel, Used stainless steel tank Laodpfx Ajy Uurdjl Noc Article number: 10176 Volume: 250 L Type: Standing on a roller frame Material (in contact with the medium): Stainless steel V4A / AISI316 Number of fixations: Roller frame Bottom: Conical bottom Top: Conical bottom Operating pressure of the tank according to the nameplate: Atmospheric Tank dimensions: Tank diameter: Ø 790mm Tank height: 1000mm Distance from outlet to bottom: 480mm Overall height: 1730mm Overall width: 900mm x 1490mm Height of the feet: 130mm Materials: Inside: 1.4571 / AISI316 Exterior parts: 1.4571 / AISI136 Equipment: Centered on the top: 1x dome cover Ø 400mm Connections on the top: See photo Pump Control cabinet Electric heating element

Condition: excellent (used), functionality: fully functional, El. heated salt bath continuous furnace system, make Kohnle consisting of Magnetic feeder Hardening furnace Type: BLH 950-650/100-5000 Temperature: max. 950°C Throughput: 200 kg/h Conveyer belt width: 620 mm Effective height: 90 mm Connected load: 160 kW Heated length: 5.000 mm Temperature control zones: 5 Throughput speed: 170 - 20 mm/min. Time in the heating zone: 30 - 240 minutes Gases used: nitrogen, methanol, natural gas, ammonia, propane Salt bath Salt: AS200 Washing system Lasdpfx Aljy Uuwme Nec

Condition: excellent (used), El. heated salt bath continuous furnace system, make Kohnle consisting of Magnetic feeder Hardening furnace Lasdpey Uuu Eofx Al Nec Type: BLH 950-650/100-5000 Temperature: max. 950°C Throughput: 200 kg/h Conveyer belt width: 620 mm Effective height: 90 mm Connected load: 160 kW Heated length: 5.000 mm Temperature control zones: 5 Throughput speed: 170 - 20 mm/min. Time in the heating zone: 30 - 240 minutes Gases used: nitrogen, methanol, natural gas, ammonia, propane Salt bath Salt: AS200 Washing system

Condition: excellent (used), El. heated continuous furnace system, make Safed consisting of: Magnetic feeder Laodpfsy Ur Aasx Al Nec Hardening furnace Type: T 80/54 Ti Throughput: 540 kg/h Temperature: max. 950°C Conveyor belt: effective width 600 mm Effective height: 100 mm Heating power: 229 kW Heating length: 7.200 mm Temperature control zones: 9 Processing time: 15 - 150 minutes Gases used: nitrogen, methanol, ammonia, propane Oil quenching bath Liquid capacity: 4000 l Bath temperature: max. 80°C Washing system Annealing furnace