Used Cimc Flat Containers for sale (10,086)

Condition: used, mileage: 952,319 km, power: 265 kW (360.30 HP), first registration: 11/2015, fuel type: diesel, empty load weight: 10,080 kg, maximum load weight: 15,920 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,900 mm, fuel: diesel, brakes: retarder, color: green, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, loading space length: 7,600 mm, loading space width: 2,450 mm, loading space height: 2,800 mm, Equipment: ABS, additional headlights, air conditioning, cabin, compressed air brake, cruise control, differential lock, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, parking heater, power assisted steering, seat heater, soot filter, spoiler, traction control, trailer coupling, * Condition: see photos * XXL StreamSpace cab with two beds and two seats * BDF swap body chassis, suitable for all containers up to 7.82 m * Volume chassis * Low Liner * Twistlock locking system * Adjustable underride guard * Trailer coupling * Volume swap body 58 m³ * Towing capacity: 20,000 kg * Loading area: Length 7,600 mm x Width 2,450 mm x Height 2,800 mm * Portal doors 270° * Wooden floor * Multilock system * Trailer with 55 m³ volume swap body available for a surcharge of €2,500 net * Retarder * Air conditioning * Coolbox / Refrigerator * Auxiliary heater * Driver assistance system: Predictive Powertrain Control (satellite-based cruise control with transmission program) * Driver assistance system: Roll Stability Control * Automatic transmission * Drowsiness detection sensor * Brake assist * Lane keeping assist * Multifunction steering wheel * Stability control assist Gjdpfx Aey Nd Dlsn Ioug * Speed control system (cruise control) * Power windows * Fog lights * Central locking with remote control (comfort locking system) * Rear axle differential lock * Air-suspended driver's seat with seat heating * Reinforced engine brake * Cab: electro-hydraulic tilting device * Electrically operated roof * Flat cab floor * Suspension: Full air suspension (front/rear) * Steering axle lift axle * Cab: steel-sprung, comfort * FleetBoard TüRec * Additional water heater * Radio CD * Work lights * Exterior mirrors electrically adjustable and heated * Electronic brake system (EPB) with ABS + ASR * Roof spoiler * AdBlue tank: 60 L * Fuel tank: 500 L aluminum * Additional fuel tank: 500 L aluminum, right-hand side * Ramp mirror * CB radio * Wheelbase: 4,900 + 1,350 mm * Gross vehicle weight: 26,000 kg * Unladen weight: 10,080 kg * Payload: 15,920 kg If a new technical inspection (TÜV) is required, we will be happy to provide a quote in cooperation with our partner workshops. Our offer is generally WITHOUT new technical inspection (TÜV), without new DGUV (German statutory accident insurance test), without new SP (safety inspection), and without new UVV (accident prevention regulations). You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to avoid any misconceptions regarding their condition and suitability. Inspections and viewings are possible at any time by prior appointment and are expressly encouraged. All details are provided without guarantee. We accept no liability for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles themselves. Subject to change, prior sale, and errors.

Condition: used, Year of construction: 2014, color: grey, overall weight: 16,000 kg, maximum load weight: 14,400 kg, empty load weight: 1,600 kg, loading space volume: 12 m³, loading space width: 2,280 mm, loading space length: 5,450 mm, loading space height: 1,000 mm, mileage: 1,001 km, first registration: 01/2014, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel superstructure, doors. Superstructure: Roll-off container with wing doors, approx. 12.6 m³. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Guodpfxozxt N He An Ieg

Condition: excellent (used), Year of construction: 2020, Ref:11141. 2020 Horizon Stitchliner Mark III L Stitchliner with A4 Landscape capability. Features: Simple, fast set-ups by non-specialist finishing operators Works from flat-sheet 4-page sections No need to pre-fold Integrated automatic set-up 3-knife trimmer High quality books with sharp spine definition Comprising: 24 station (1 x VAC L600Ha + 3 x VAC L600Hm) 6 station tower suction collators with touch-screen control, double- and miss-sheet control. Accumulator/Folder ACF-40 with double gate-fold to; SPF-40 Saddle stitcher with 2 x Hohner 43/6S stitching heads to; HTS-40 Three knife trimmer Specification: Max sheet size: (Portrait: 356 × 508mm) (Landscape: 267 × 610mm) Min sheet size: 140 × 194mm Finished booklet size (approx): Max: 352 × 303mm Min: 120 × 85mm Typical formats: A3, A4, A5, B4, B5 Paper weight: Uncoated: 52–350 gsm / Coated: 73–350gsm Max stitch thickness: 5mm Equivalent to ~10mm booklet thickness (~50 sheets of 80gsm) Loop stitching: Max ~3mm stitch thickness Wire size: Typically 0.4 – 0.6mm (No.24–27 range) Gjdpfx Anozyu Ugs Ioug Trim width: 2 – 25.4mm Max trim thickness: 10mm Max speed: Up to 6,000 booklets/hour A4 landscape: 5,300/hour

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 01/2010, wheelbase: 9,340 mm, Year of construction: 2010, Equipment: ABS, = Additional Options and Accessories = Godpfxszbb Hmj An Isug - EBS - Tool box = Further Information = Rear axle 1: Max. axle load: 9,000 kg Rear axle 2: Max. axle load: 9,000 kg Rear axle 3: Max. axle load: 9,000 kg Unladen weight: 5,623 kg Payload: 35,377 kg GVW: 41,000 kg

Condition: new, Year of construction: 2026, functionality: fully functional, ## Description The KMK Easy Former PW140SR-C is a fully automatic roll feeding machine for the production of paper plates, bowls, and trays. Thanks to its modern, all-electric servo drive system, it offers high production output, maximum precision, and energy-efficient operation. The machine was specifically designed for manufacturers of sustainable paper packaging and is ideally suited for the economical production of a wide variety of disposable paper packaging. The quick tool change allows for flexible production of different formats and products. ### Highlights * Fully automatic production process (feeding, heating, forming, punching, and counting) * All-electric servo drive * Suitable for round, rectangular, and oval products * Quick tool change for different formats * Integrated punching system * Low tool and maintenance costs * User-friendly touchscreen control * Robust and durable machine construction * High production accuracy ### Products that can be manufactured * Paper plates * Paper bowls * Paper trays * Curl containers * Flat-rimmed plates * Various disposable paper packaging ### Technical data * Working speed: up to 28 cycles/minute * Table size: 660 × 420 mm * Maximum roll width: 620 mm * Maximum roll diameter: 1,500 mm * Paper thickness: 0.30 – 0.60 mm * Forming tools: up to 3 tool sets * Punching tools: up to 3 tool sets * Main drive: servo motor * Total power: approx. 31 kW * Machine weight: approx. 4,100 kg * Machine dimensions (L × W × H): 5,120 × 1,800 × 2,278 mm ### Standard equipment * Automatic roll unwinder * Automatic product stacking system * Intuitive touchscreen control ### Included in the scope of delivery ✅ New machine directly from the manufacturer ✅ 2-year warranty ✅ Professional installation and complete assembly by experienced KMK technicians ✅ Machine commissioning on-site ✅ Free training and instruction of your operating personnel ✅ Comprehensive after-sales service and technical support even after installation Guodpfx Aezg E Hgsn Ieg ### Machine type Roll feeding machine for the production of paper plates and paper packaging KMK Easy Former PW140SR-C

Year of construction: 2001, operating hours: 27,400 h, condition: good (used), functionality: fully functional, Die-cutting machine with stripping station, foundation tilting table (third-party manufacturer), tilting table/preparation table, waste stripper, electronic double-sheet detection, pull marks BS + AS, machine height increased by 300 mm, 1 die-cutting frame, various stripping frames and stripping pins (including cart), quick centering device for sheet stacks, manual non-stop feed, manual non-stop delivery, price ex works, dismantling and loading can be arranged for an additional charge! Video available upon request! In May 2026, a PLATEN CONDITIONING was carried out by BOBST on the die-cutting machine. All deposits were removed from the upper and lower tables, and the die was polished. The sector was opened and assessed as being in "like-new" condition. Photos, video, or invoice available upon request! Note: The platform must be adapted by the buyer! Longitudinal handrail missing! Technical main data: Maximum sheet size: 720 × 1020 mm, Minimum sheet size: 350 × 400 mm, Maximum die-cutting force: 250 tons (2.5 MN), Maximum production speed: 7,500 sheets per hour, Processable materials: Paper / solid board: from 80 g/m² up to 2000 g/m², corrugated board: up to 4.0 mm thick Gedpozmyfdofx An Ieug Dimensions and weight: Machine length: approx. 6,000 mm Machine width: approx. 2,000 mm Machine height: approx. 2,500 mm Total weight: approx. 19,500 kg Features of the Series II: C.U.B.E. system: Electronic Bobst machine control system Centerline system: Micrometric adjustment for fast set-up times and precise tool alignment Stripping station: Integrated double-round stripping unit for waste removal Non-stop system: Continuous sheet feeding and delivery Ultrasonic double-sheet detection

Condition: used, Year of construction: 2016, color: orange, loading space volume: 10 m³, loading space width: 2,400 mm, loading space length: 4,400 mm, loading space height: 1,000 mm, mileage: 1,001 km, first registration: 01/2016, gearing type: other, driver cabin: other, Equipment: central locking, crane, Vehicle location: Bovenden, swing-out tailgates, crane behind the house, emergency stop, grabber control, foldable, 2-point hydraulic support, radio remote control, 3x hydraulic extensions. Superstructure: Roll-off container with aluminum side walls (600mm + 350mm) & Hiab 099E-3 HiDuo crane with radio control (remote control). Load chart: 2.4m-4000kg, 4.2m-2300kg, 5.8m-1620kg, 7.7m-1200kg, 9.6m-960kg! Overall length approx. 5800mm! Side wall extension of 500mm / 1,000mm. Grabber not included in the price! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors! Guedezaf Tbjpfx An Ieg

Condition: excellent (used), Year of construction: 2023, color: grey, NEW! Container 10m³ / 10 cubic meters With French door. Length: 5.5 meters Width: 2.28 meters Height: 0.8 meters Hook height: 1.45 meters Cevoman bvba. Gsdpfx Aszldrxjn Ieug Lenskendijk 5 2200 Herentals Belgium

Condition: new, Year of construction: 2026, color: green, New 8-foot container DV standard Colour: Green RAL6007 = Additional information = Gusdsy Inlqjpfx An Ieg General information Year of manufacture: Jan. 2026 Model year: 2026 Serial number: SJCL304979 Dimensions Dimensions (L x W x H): 244 x 220 x 226 cm Weights Unladen weight: 850 kg Payload: 5,150 kg Gross vehicle weight: 6,000 kg Condition Overall condition: very good Technical condition: very good Visual appearance: very good Further information Please contact Arne Honingh for more information.

Condition: excellent (used), functionality: fully functional, power: 110.32 kW (149.99 HP), first registration: 11/2021, fuel type: diesel, fuel: diesel, driver cabin: day cab, operating hours: 172 h, Equipment: air conditioning, all wheel drive, car registration, 1352T BOKI MUNICIPAL VEHICLE 1352T Length x Width x Height – 5,070 x 1,700 x 2,190 mm (excl. mirrors) Wheelbase 2,400 mm / 990 mm Tank volume: Diesel 50 liters, AdBlue 25 liters, hydraulic oil 50 liters Additional equipment affects unladen weight, payload, and dimensions Engine FPT F1C 1152, EU 6C, 110kW (standard) FPT, type F1C, 2,998 cm³, 4-cylinder diesel engine 110 kW / 150 HP at 3,000 rpm. Torque: 370 Nm at 1,320 rpm. Emission standard Euro 6C (Stage V in vehicle documents) Steering (standard) Hydraulically steered front axle with up to 40° steering angle Left-hand drive Third axle forced steering and can be lifted Godpfx Anszf Eh Ue Ieug Hydraulic Load-Sensing 2-circuit system Load-Sensing variable displacement pump with 2 hydraulic circuits (LUDV) Independently switchable electrically Proportional adjustment Nominal flow rate: max. 80 l/min per circuit Total flow rate: 135 l/min at 3000 1/min, max. 200 or 300 bar, manually switchable Two pressure and tank lines at the front and rear, including return flow filter With drip-free flat-face quick couplings Including leak oil line at the front and rear With separate filtration Including 2 oil flow regulators Floating position for double-acting control valve Floating position for 1 double-acting control valve at the front Double-acting control valve at the front 1 double-acting valve with 2 drip-free flat-face quick couplings at the front Operation via buttons on the joystick Air conditioning Air conditioning integrated into the vehicle's heating and ventilation system Vehicle height remains unchanged Control panel holder Control panel holder for spreader control unit Exterior mirrors adjustable and heated Electrically adjustable and heated exterior mirrors Accelerated lifting and lowering, fixed mounting plate Accelerates the lifting and lowering of attachments with their own hydraulic system Used with attachments with a high flow rate at the control function. Only in combination with: FPT engine, LS hydraulics, fixed mounting plate DIN 76060-B Rear connections offset for roll-off systems Hydraulic connections on the bulkhead placed to the outside, to allow collision-free mounting of roll-off systems Preparation for tipper cylinder Preparation of the vehicle for the later installation of a tipper cylinder, Electrical connections prepared, hydraulic connection prepared With the following additional equipment: Central lubrication system vehicle Consisting of the required lubricant distributors, Connection fittings at the lubrication points and the Distributors, as well as the lubricant lines: Front axle 10 lubrication points Rear axle 14 lubrication points Total 24 lubrication points ILC MINI MAX 12V 1.0 kg R, CT, PE Stirring impeller Control with: Operating pressure: 200 bar Speed: 22 rpm Container: 1.0 kg Grease follower lid: No Stirring impeller: Yes Low level indicator: No Outlet/number: G1/4" / 2; M10x1.8" Pump element with: Cable: Yes Clamping: Bayonet 7-pin Voltage: 12 V Connection: M12x1 IP67 Without attachments. Suitable attachments can be purchased separately: Vario snowplow HUMMEL LF-D 2700 - €7,500.00 net Roll-off tipper AR-L55-2 new - €17,500.00 net Spreader or wet salt spreader available at an additional price. Subject to changes, printing errors, mistakes, and prior sale. All information is provided without warranty. The sale takes place with the exclusion of any guarantee or warranty.

Condition: new, Year of construction: 2024, color: blue, new (ONE-WAY) 20FT HIGH CUBE DV 9'6" container Internal dimensions: 5.90 x 2.35 x 2.70 m (LxWxH) 5 lashing rings left and right on the floor and ceiling Colour: Blue (RAL: 5013) Available: 3 units = Further Information = Godpfozx Sz Isx An Ijug General Information Year of manufacture: Sept. 2024 Model year: 2024 Dimensions Dimensions (L x W x H): 6056 x 244 x 290 cm Weights Unladen weight: 2,240 kg Payload: 28,240 kg Gross weight: 30,480 kg Condition General condition: very good Technical condition: very good Visual condition: very good Further information Please contact Arne Honingh for further information.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,100 kg, maximum load weight: 14,900 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 9,970 mm, total width: 2,550 mm, total height: 1,250 mm, suspension: air, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. *Chassis for central-axle trailer Fine-grained steel welded construction Front stop, transverse, in a foldable/adjustable design, as previously delivered with AU 257359 1 pair of removable guide rollers, front and rear 1 additional pair of removable guide rollers 4 container locks with sturdy arms based on 20" for swap bodies 7.45 m and 7.82 m 1 pair of front transmission support legs, with straight lower section and single-side operation on the right side 1 pair of rear transmission support legs, with straight lower section and single-side operation on the right side (FR) Side impact protection set inward, for optimal clearance to the swap body supports Steel underrun protection *Towing equipment for central-axle trailers Towing beam with certified 50 mm tow eye, freight forwarding version Flat flange plate for tractors with underrun-protected LBW, connected to the drawbar at the top and bottom Drawbar clamped/bolted, easily replaceable and partially adjustable in length! Under-coupler drawbar, free drawbar length approx. 2150 mm Folding bracket with spring support on the drawbar, for routing the connection cables to the truck *Axles + Suspension SAF or BPW disc brake axles “Laser-aligned axles/chassis” reduces tire wear and fuel consumption Travel odometer/odometer Air suspension *Brake System 2-line compressed air brake system Color-coded lines for easy servicing. Air reservoir: 208 liters Spring-loaded parking brake, Control panel in the front right Duomatic connection at the front, with connecting line to the tractor unit, connection in the front right 24-volt EBS, electronic braking system with EBS connector at the front, with connecting cable, connection in the front right Caution: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lift & lower valve, hold function in both lower and lift positions Vehicle – Vehicle Stability Control System Brake release function via a pushbutton on the vehicle next to the lift & lower valve, for releasing the brake when coupled; EBS power supply must be ensured! “TPMS” Tire Pressure Monitoring System according to ECE R 141, display in the towing vehicle via EBS *Wheels and Tires 385/65 R22.5" steel rims, factory silver *Electrical System 24 volts, multi-chamber LED lights, yellow LED side lights, LED license plate lights, (Note: With certain towing vehicles, false diagnostic errors may occur even though the system is functioning properly) Yellow LED side lights linked to the turn signals “Flashing side lights” Parking sockets for electrical and air connections on the drawbar 2 white LED front position lights 2 white/red LED rear lane-keeping lights 1 x 15-pin connector at the front, with connecting cable, located on the right rear Gsdpfxozd U I Uo An Ijug 2 additional LED work lights, recessed and integrated into the rear, activated by the reverse light 1 LED work light at the front, centered between the cross members, shining toward the rear, activated by the reverse light *Country of Registration/License Plates Prepared for single-line license plate holder Night parking sign at front and rear *Paint Finish Frame Hot-dip galvanized or painted according to customer preference

Condition: used, maximum load weight: 35,840 kg, overall weight: 41,000 kg, axle configuration: 3 axles, first registration: 06/2024, next inspection (TÜV): 02/2026, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt of the equipment. Complete equipment list available upon request. Chassis: * Configuration for the transport of 45', 40'HC, 30', 20' center, 20' rear, 2x20', 40' ISO containers * Frame adaptation for a 40' ISO container * Rear pneumatic extension with an additional mechanical locking pin * Container Master 45' R2 * Extendable bumper * Steel underride guard Axles and Suspension: * SAF disc axles 3 x 9,000 kg, 22.5 INTRADISC KNORR clamp * Brake disc diameter 430 mm * Rigid axles * Approx. 1,090 mm saddle height unladen Gsdpfow Ak A Uox An Ieug * 1st lift axle Support Legs: * JOST 2-speed gear support legs Tires/Rims: * BRIDGESTONE 385-55-22.5 DURAVIS R002 3PMSF (B-B-70) * Rolling resistance: B, wet grip: B, rolling noise: 70dB * Without spare wheel * Steel rims 22.5-11.75 ET-120 * Protective caps for wheel nuts Braking System/Pneumatics: * Steel air tank braking system according to manufacturer's choice with basic modulator with RSS/RSP Electrical System: * Socket 1x15-pole and 2x 7-pole with EBS connection, without connecting cables to the electronic control unit (ECU) Lighting: * Partial LED Aspöck-EUROPOINT III * LED license plate lighting * LED outline lights * LED side marker lights Other Chassis Equipment: * Full-load fenders * Splash guard behind the third axle * Full PVC fenders * Without spare wheel carrier and spare wheel winch * Key for container locking * Adaptation of the frame for the transport of ISO 40' containers (with a flat floor without a tunnel) * 2 adapter pieces and 2 spacer supports * Without toolbox Painting: * Chassis KTL coating * Painting chassis RAL 7021 (black-gray)

Condition: used, axle configuration: 3 axles, first registration: 09/2026, color: other, Year of construction: 2017, Empty weight: 5.700 kg Axle 1: left 8 mm right 8 mm Axle 2: left 10 mm right 10 mm Axle 3: left 9 mm right 9 mm We have the possibility to stack trailers! Godpozz Im Eofx An Ijug

Condition: good (used), # 7.5 Meter Container Platform – Used A used container platform in good condition is for sale. ### Technical Specifications * Length: 7.5 meters * Width: 1.05 meters (standard) * Brand: unknown * Condition: used * Location: Herentals (Belgium) The container platform is suitable for various container and transport applications. Ideal as a replacement or for a new construction project. Available immediately. Price: €950 net. Inspection possible by appointment. Please contact us for further information or additional photos. --- ## About Cevoman ✔ More than 45 years of experience with trucks and commercial vehicles ✔ Technically inspected in our own workshop ✔ Specialist in MAN trucks, loading cranes, and container systems ✔ COP certified ✔ Experience in worldwide export ✔ Personal service and professional advice Cevoman BV Lenskensdijk 5 2200 Herentals Belgium ☎ = Further Information = Technical condition: good Optical condition: good Damage: none Please contact Joeri Celen or August Celen for further information. Gsdpfjzquxyex An Ioug

Condition: used, Year of construction: 2004, machine/vehicle number: AL/007522, functionality: fully functional, operating hours: 25,000 h, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 50 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 3,870 mm, travel distance Y-axis: 1,465 mm, travel distance Z-axis: 200 mm, workpiece length (max.): 3,870 mm, workpiece width (max.): 1,465 mm, workpiece height (max.): 200 mm, workpiece weight (max.): 100 kg, number of axes: 3, number of slots in tool magazine: 10, actuation type: electric, total height: 2,700 mm, total length: 5,800 mm, total width: 3,500 mm, overall weight: 3,800 kg, table length: 3,870 mm, table width: 1,465 mm, year of last overhaul: 2023, Equipment: documentation/manual, For sale: a fully functional CNC machining center, Morbidelli Author, manufactured in 2004. The machine features a 7.5 kW main spindle with HSK63F tool holder, a tool magazine with 10 positions, a drilling head with 24 positions, an additional mortising head, and a powerful vacuum pump with a capacity of 190 m³/min. It is in very good technical condition, regularly maintained, and still in operation. A significant advantage for the buyer is the opportunity to personally inspect and test the machine in real-time during actual production. Thanks to this extensive configuration of the drilling head and mortising unit, the machine is ideal for both custom and series production of wood products, furniture, frames, or doors. We will also include a spare spindle, which requires a position sensor replacement. Gedozzmhnopfx An Isug

Condition: new, Year of construction: 2026, color: blue, New 8-foot DV-standard container Colour: Blue RAL5010 = Further information = General information Year of manufacture: Jan. 2026 Model year: 2026 Serial number: SJCL305043 Dimensions Dimensions (L x W x H): 244 x 220 x 226 cm Weights Unladen weight: 850 kg Payload: 5,150 kg Gjdpfxey Ipx Eo An Ioug Gross weight: 6,000 kg Condition Overall condition: very good Technical condition: very good Visual condition: very good Further information Please contact Arne Honingh for more information.

Condition: used, Used Becomix type MV-2000 stainless steel premix vacuum processing vessel. Approximately 2,000 litre capacity. Has welded dished top and welded dished bottom heads. Internal rated 2 bar / full vacuum design pressure at 134 deg.c. External jacket rated 4 bar design pressure at 152 deg.c. Unit has bottom entry agitator driven by a 5.5kW 980 RPM 3/415V 50Hz electric motor. Unit is mounted on stainless steel legs. Click on the link below to see a video of the machine running. Specifications: Capacity: 528 gal Gusdpfx Aozvycbsn Iog Type of stainless: stainless steel Internal Pressure: 29 PSI Internal Temperature: 273°F Jacket Pressure: 58 PSI Type Of Heads: welded dished top and welded dished bottom Legs/Lugs: Yes

Condition: good (used), Year of construction: 2001, total length: 7,150 mm, total width: 2,550 mm, total height: 2,670 mm, Welfit Oddy 20FT Tank Container Swap Body Capacity: 31,050L / 1 compartment Type: IMO-1, T7 Code: L4BN Bottom discharge Steam heating Insulated Payload: 32,020kg Design temperature: +130°C 5Y/CSC inspection valid until 08/2027 = Further Information = General Information Year of manufacture: May 2001 Model year: 2001 Weights Tare weight: 3,980 kg Payload: 32,019 kg Gujdpfsyyxapex An Iog Gross weight: 36,000 kg Functionality Internal volume: 30,850 l Body brand: Van Hool 20FT TC 30,850L, L4BN, IMO-4 Number of compartments: 1 Condition Technical condition: good Visual condition: good Additional Information Please contact Arne Honingh for more details.

Condition: new, empty load weight: 1,260 kg, maximum load weight: 2,240 kg, overall weight: 3,500 kg, loading space length: 4,050 mm, loading space width: 2,000 mm, loading space height: 300 mm, suspension: steel, tire size: 195/50r13c, *Large three-way tipper from *trailer manufacturer* HAPERT model COBALT HM-2-FERRO 3500kg 405x200x30. In our opinion, the *Cobalt tipper series* from *Hapert* is extremely stable, very well equipped and has a fair price. The *car trailer* as a *high loader* is designed for durability. High-quality equipment and a very comfortable chassis (parabolic suspension) come as standard with this* three-way tipper trailer*. Here is an overview of the extensive standard equipment of the *tipping trailer*. Built with an extremely sturdy hot-dip galvanized steel frame, solid steel floor, slide-in ramps under the loading area, crankable rear support set, parabolic suspension with shock absorbers and 100 km/h, electro-hydraulics with battery in the container with cover, removable illuminated control unit, double-walled anodized aluminium side walls, all walls are foldable and removable, easy-to-operate eccentric locks, low chassis with 195/50R13C tyres, lashing eyes with 1000kg load capacity, net hooks, steel plate on wooden floor, automatic support wheel and a reinforced V-drawbar. We offer useful accessories for *Hapert three-way tippers*. We can provide you with a side wall attachment, grid attachment, tarpaulin, bows, flat tarpaulin, charger, emergency hand pump, tool box, lashing straps and anti-theft device at a reasonable price. Guedpfx Anoqxbkns Ieg

Condition: used, Year of construction: 2023, functionality: fully functional, roll width: 465 mm, total width: 540 mm, total length: 3,250 mm, conveying length: 3,250 mm, power: 0.37 kW (0.50 HP), axle spacing: 125 mm, frame height: 120 mm, frame width: 35 mm, Powered Roller Conveyor / Work Table / Conveyor Technology Model: Flat Belt Condition: Used Year of manufacture: 2013 Manufacturer: AMI Fördertechnik Total length: approx. 3,250 mm Total width: approx. 540 mm Conveyor width: approx. 465 mm Roller/shaft pitch: approx. 125 mm Steel frame Frame height: approx. 120 mm Frame width: approx. 35 mm Color: Light grey Includes 2 SEW motors (0.37 kW) Includes side guides Feet must be ordered separately Guedpjylmi Uefx An Ieg Available stock: 10 units Price per unit Internal item number: 2026021902 Features: Condition: fully functional, with signs of use Ideal for fast material handling Professionally dismantled and packaged Collection address: Industriestraße 5 (47918 Tönisvorst) The conveyor system was operational up until dismantling. Thanks to the excellent craftsmanship of the conveyor technology, your material glides smoothly to its destination—even under heavy loads. Tailor-made solutions for your intralogistics Whether roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods—we are your competent partner! We are happy to provide you with a customized quote or advise you on design and installation questions. Simply inform us of your requirements and local conditions. Benefit from our many years of experience and outstanding network of industry professionals. We have successfully realized projects for companies in a wide range of industries, such as logistics, pharmaceuticals, crafts, and electronics. Together we will find ways to optimize your processes and material flow in a cost-effective and sustainable manner. We can also offer you fully automated sorting technology or additional components such as picking shelves or containers.

Condition: new, Year of construction: 2019, container 6000x2350x2250 Gusdpfxezvny Uo An Isg Condition: New Year built: 2019

Condition: like new (used), Year of construction: 2018, machine/vehicle number: 22-7254, functionality: fully functional, operating hours: 30 h, power: 2.2 kW (2.99 HP), input voltage: 380 V, input current: 10 A, input frequency: 50 Hz, type of input current: AC, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,010 mm, travel distance Z-axis: 300 mm, workpiece length (max.): 3,500 mm, workpiece width (max.): 2,200 mm, workpiece weight (max.): 300 kg, number of axes: 3, number of slots in tool magazine: 1, controller manufacturer: Kinetic-NC, actuation type: electric, total height: 1,900 mm, total length: 3,700 mm, total width: 2,700 mm, overall weight: 1,200 kg, table length: 3,500 mm, table width: 2,200 mm, year of last overhaul: 2024, Equipment: CE marking, documentation/manual, CNC-Step RaptorX-SL 3200/S20 gantry CNC router (2018) – approx. 30 operating hours, production-ready Immediately available CNC gantry router from CNC-Step, built 2018, in as-new condition. The non-resettable hour meter reads only ~30 hours – the machine is practically unused and shows no wear. Originally commissioned by CNC-Step (OEM). Largest standard model of the RaptorX-SL range: travel 3200 × 2010 × 300 mm, clamping area approx. 3.5 × 2.2 m, variable bridge height 150/300/400 mm. Heavy steel frame, Hiwin/Bosch Rexroth linear guides, planetary-geared drive with Benezan BEAST stages – rigidity and repeatability for professional continuous use (furniture/interior fit-out, sign-making, model/prototype work, composites). Fully production-ready, incl.: • Teknomotor Ceramic spindle 2.2 kW (18,000–24,000 rpm, ER25, air-cooled) • KinetiC-NC control with unlimited full-version license (transferable) • Vectric VCarve Pro license • PC, monitor, handheld pendant • Extensive tooling package (ER25 collets Ø2–15 mm, solid-carbide cutters, Ø60 Tornado face mill) Godpfszfv T Iex An Ioug • 400 V three-phase connection Technical data: • Travel X/Y/Z: 3200 × 2010 × 300 mm • Spindle: Teknomotor Ceramic 2.2 kW, 18,000–24,000 rpm, ER25, air-cooled • VFD: Toshiba VF-nC3 • Drive: stepper motors + planetary gearing, 4× Benezan BEAST • Guides: Hiwin / Bosch Rexroth 20 mm • Control: KinetiC-NC (CncPod, Ethernet) • Power: 400 V three-phase (CEE) · Weight: approx. 1,160 kg • Serial number: 22-7254 Original 2017 invoice available (buyer data anonymized). Base-machine list price: €28,198 net (€33,555.62 incl. German VAT) – excluding spindle and VCarve license. Here fully equipped for a fraction of that. Live demonstration under power by appointment. Collection, dismantling and transport by arrangement. Location: Oploo (NL). Price: €17,000 net (excl. VAT)

Condition: used, axle configuration: 3 axles, first registration: 09/2011, color: other, Year of construction: 2011, Empty weight: 5.100 kg Axle 1: left 8 mm right 8 mm Axle 2: left 8 mm right 8 mm Axle 3: left 8 mm right 8 mm Guodpfezp Hc Ijx An Isg We have the possibility to stack trailers!

Condition: new, first registration: 12/2005, Year of construction: 2005, Jung TMA 18L 2-Axle Trailer for Skips • ABS • Pneumatic container locking/unlocking • Steel rims • 2 x air-sprung Mercedes axles • Lifting/lowering system • Axle load: 2 x 10,000 kg • Gross vehicle weight: 18,000 kg • Unladen weight: 3,320 kg • Payload: 14,6801 kg • Twin tires • Tires: 265/70 R 19.5 • Tire tread: 30-50 • Total trailer length: 7,650 mm - Ready for use! - MOT / TÜV SP: New for an additional charge! Gjdpfx Aswmpgyjn Ioug - German trailer! Subject to errors and prior sale!