Used Comev Mte 26 for sale (7,249)

Condition: used, Year of construction: 2009, total length: 2,550 mm, Tugger Iijdpfxsy E Ubgs Afmjg Mafi MTE 2/15 Drive Electric Year built 2009

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Equipment: documentation/manual, type plate available, Taylor Hobson Talyrond 265 roundness measuring instrument. Extremely accurate; it can measure the roundness of lenses, optics, pistons, turbine components, tubes, shafts, and also eccentricity, e.g., of cams on a camshaft or journals of a crankshaft. It is certainly of interest for motorsport and tuning companies. The first photo is a "representative image" from a Taylor Hobson catalog, showing how it is constructed, except for the computer, which is a newer, more modern HP model with a small form factor. Iisdpezcqy Ejfx Afmsg Max. diameter 350 mm Max. test piece height 500 mm (higher values are possible by measuring in two parts, up to a maximum of 1000 mm...) Self-centering of the workpiece +/- 5 mm Max. weight of test piece 40 kg The system has been used very little and has had only two owners. The first owner, from whom I bought it, was an implant company in Hamburg; it was used in a "medically clean environment" and is extremely clean. It was never located in a dirty machine hall. The year of manufacture is estimated to be between 2003 and 2005. The Taylor-Hobson measurement software is, of course, included and runs on the supplied HP computer (without a password...). It is also on the USB stick, perhaps for installation on another machine at your location. Accessories are included: the original Taylor-Hobson desk, computer, monitor, seven (7!) measuring probes, each of which is very expensive to purchase. A sample/sample lens (hemisphere) is included for calibration! The very detailed operating manual is on the USB stick, and all circuit diagrams and functional diagrams are also included! The system will be shipped on two Euro pallets via a freight carrier. It is already well secured on them. The Talyrond 265 and the desk will be wrapped with bubble wrap, etc., and secured with stretch film to provide extreme protection during transport. The system itself is fixed with "transport safety screws." Shipping is at the buyer's expense and will be on two Euro pallets. The measuring system should definitely be assembled and put into operation by a Taylor Hobson service technician, who can then also recalibrate the system on-site. This is now recommended after a few years. Errors can be made during assembly and commissioning. For example, some locking screws are installed for transport, and if you forget them, the system could be damaged when starting up. A truly well-maintained, very accurate system that will continue to provide excellent service for many years to come!

Condition: used, axle configuration: 3 axles, first registration: 12/2002, color: grey, Year of construction: 2002, gearing type: other, LICENSE PLATE: AC22259 TITLE: ZORZI 26 R 070 19 A, SKIP LOADER WITH LEAF SPRING SUSPENSION REF: 21R09 YEAR: 2002 AXLES: 3 WHEELBASE: 3800 MAXIMUM LENGTH: 9.205 m ORIGIN: Italian PAYLOAD: 21,650 kg - TRAILER: 26,000 kg, fully loaded TYPE OF BODY: Skip loader BODY MODEL: BTE Iedpfx Afeuznrcomoig ADR: No CARGO AREA DIMENSIONS: FROM: 5.00 m + 0.20 m TO: 7.30 m + 0.20 m SUSPENSION: Leaf spring BRAKES: Drum brakes TIRES: 265/70 R19.5 ACCESSORIES: - No. 4 external hydraulic locking mechanisms - Locking mechanism with oil lines from the tractor unit REFURBISHED: No INSPECTED: 12/10/2022 TIRE CONDITION: 60% The prices shown do not include VAT. Please contact the sales representative for an updated price and condition comparison. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile AURORA SKIP LOADERS operates in the sector of sales and purchase of industrial and commercial vehicles, specializing mainly in the waste management sector. Specializing in trucks, trailers and skip loader equipment. With a fleet of over 50 trucks and over 150 skip bodies, containers with and without cranes, available for immediate delivery. S.E.&O Given the number of advertisements and details provided, Aurora encourages customers to verify the accuracy of the information with the sales staff.

Condition: used, Planer, thicknesser Krummen & Katz 4/26. Iijdpozkrulefx Afmog

Year of construction: 2013, condition: excellent (used), machine/vehicle number: 1425131305, Lightly used, in very good condition. Iisdpfxozdpz Ne Afmjg

Condition: used, Year of construction: 2015, operating hours: 21,822 h, gearing type: automatic, color: other, Year of manufacture: Aug 2015 Axle 1: left 22 mm right 22 mm Axle 2: left 26 -26 mm right 26-26 mm Isdpfx Afjzvfyfsmoig Axle 3: left mm right mm

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, C-frame press for clinching technology Pressing force: 4.8 t Iisdpfx Asy Ey Hzjfmsg Air pressure: 6 bar Total stroke: 32 mm Power stroke: 3 mm No tools included

Condition: excellent (used), Catalogue number 7640 ADVANTAGES – The best wide planing machine for wet and dry timber – Ideal for processing logs, flooring boards, etc. – 2 planing cutterheads + 3 spindles – Manufactured by the German brand KUPFERMUHLE – Used planer, very good condition TECHNICAL SPECIFICATIONS - Max planing width: 610 mm - Max planing height: 200 mm - From above: - Powered feed roller, toothed - Pawls - Pressure mechanism - 2 powered feed rollers, toothed - Pressure mechanism - 610 mm, 6-knife planing cutterhead, 15 kW - Pressure mechanisms - Smooth outfeed roller - From below: - Side pressure at infeed - Guide rail - Infeed table - Powered feed roller, toothed - 610 mm, 6-knife planing cutterhead, 7.5 kW - 2 smooth feed rollers - Side pressure at outfeed - Rear: - 2 side spindles + pressure units: 1) Right vertical spindle 200 mm, 15 kW 2) Left vertical spindle 200 mm, 15 kW - Electrically adjustable left vertical spindle (right/left) - Spindle diameter: 40 mm - Alternate spindle settings - Spindles adjustable: up/down, right/left 3) Additional lower horizontal spindle 160 mm, adjustable up/down and right/left, 5.5 kW - Spindle diameter: 35 mm - At outfeed: 2 upper metal sliding rollers, 2 lower powered rubber rollers - Adjustable rollers in the lower table - Electric height adjustment for planing - 6 feed speeds: 12.8 / 16.3 / 20 / 25.6 / 32.6 / 40 m/min Iiodpfxjzx Suue Afmog - Feed motor: 8 kW - Extraction port diameters: 2×120, 2x160 mm - Dimensions (LxWxH): 2980 x 1980 x 1800 mm - Weight: approx. 3500 kg Net price: 66,900 PLN Net price: 15,920 EUR (depending on 4.2 EUR rate) (Prices may change with significant exchange rate fluctuations)

Condition: used, Technical specifications: Briquette diameter: 60 mm Briquette length: 50 mm Hopper diameter: 1100 mm Iiodpfxjzd Akke Afmog Hopper height: 910 mm Hopper capacity: 0.89 m³ Throughput: 60-80 kg/h Power supply: 400 V Motor power: 7.5 kW Safety switch Overall dimensions: Length: 1670 mm Width: 1100 mm Height: 1500 mm

Year of construction: 2000, condition: used, Well-maintained VK 26 MX for sale. The machine will be available from May 2027 and can also be inspected while in operation. Iisdpfxszkt Dbe Afmog

Year of construction: 2023, condition: good (used), functionality: fully functional, Description Thermo Fisher Scientific Applied Biosystems QuantStudio™ 5 Real-Time PCR Instrument Service history The system underwent preventive maintenance by Thermo Fisher Scientific on 17 April 2026. Last service: 17 April 2026 Performed by: Thermo Fisher Scientific Next scheduled service: 17 April 2027 Included in the sale Applied Biosystems QuantStudio™ 5 Real-Time PCR Instrument 96-well, 0.1 mL thermal block Dell OptiPlex computer Monitor Keyboard and mouse QuantStudio Design & Analysis Desktop Software Certificate of Conformance Technical specifications Manufacturer / model: Applied Biosystems (Thermo Fisher Scientific) QuantStudio™ 5 Real-Time PCR System Block: 96-well, 0.1 mL, fixed; reaction volume 10–30 µL Optics: OptiFlex™, white LED, 6 independent channels, 21 filter combinations; excitation 450–680 nm, detection 500–730 nm Multiplexing: up to 6 targets Temperature: Peltier, 4–99.9 °C, uniformity 0.4 °C, 6 VeriFlex™ zones; max. ramp 6.5 °C/s, average sample ramp 3.66 °C/s Iiedpfx Aozr Nr Refmjg Sensitivity: detects approx. 1.5-fold differences in singleplex; dynamic range 10 logs Display and memory: integrated 8.5″ touchscreen, 10 GB on-board Software: QuantStudio Design & Analysis Desktop Software Manufactured: 15 August 2023 Dimensions / weight: approx. 27 × 50 × 40 cm (W × D × H), < 26 kg Classification: For Research Use Only (RUO)

Year of construction: 2015, condition: excellent (used), functionality: fully functional, machine/vehicle number: 400 6071 LA398, In very good condition. Iijdpfx Afezdp H Esmeg

Condition: excellent (used), Year of construction: 2007, FOD BYDGOSZCZ Shaft Multi-Rip Saw* DPPD III 50E 530/150 Catalogue number: 7405 TECHNICAL DATA - Maximum cutting height: 150 mm - Maximum element width: 700 mm - Working width of arbor with saw blades: 530 mm - Maximum blade diameter: 450 mm (currently fitted: 350 mm) - Blade bore diameter: 90 mm From above: - Kickback pawls - 2 toothed feed rollers From below: - 2 smooth feed rollers - Arbor with saw blades - Smooth feed roller Ijdpfxezulwzo Afmeig - 4 feed speed options - Feed motor approx. 2 kW - Main motor 30 kW - Machine dimensions (L/W/H): 2400x1700x1900 mm - Weight approx. 3000 kg – Made in Poland – Used machine, condition: very good Net price: 38,900 PLN Net price: 9,260 EUR (calculated at an exchange rate of 4.2 EUR) (Prices may change in case of substantial exchange rate fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and trade names are used solely for informational purposes to facilitate identification of the product. We only resell items that were previously put on the market by the manufacturer. We do not have any business relations with the manufacturer.

Condition: used, maximum load weight: 19,680 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 06/2009, Year of construction: 2009, Equipment: ABS, Manufacturer Eurotank Model 3 axle ET-26-4 ADR 25.500 L 4 rum Iisdpfxjwlydyj Afmeg Year 2009 Condition Good Serial Number YF908S16S95049774 Ref. nr. 7832 Reg. date: 30.06.2009 Disc brake: ? ABS: ? Rear axles: SAF Suspension: Air Tire Size: 385 / 55R22,5 Cover% left 20%-40% -40% Toolbox: ? Total weight: 24000 Kg Net weight: 4320 Kg Load capacity 19680 Kg Tank: 25500 L Compartments: 4 (10000 L + 5000 L + 5000 L + 5000 L)

Condition: good (used), axle configuration: 2 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, first registration: 05/1988, total width: 2,500 mm, suspension: air, tire size: 385/65R22.5, wheelbase: 8,920 mm, color: white, Year of construction: 1988, = Additional options and accessories = - Air suspension = Notes = Vogelzang camper trailer – 8 beds – Bar – Shower/toilet – TV – Refrigerator Year of manufacture: 05-19-1988 Chassis/VIN: 050388 OH-50-28 APK/TUV: 05-26-2027 Camper trailer 8 beds Bar Seating area Toilet Shower Batteries Generator TV Refrigerator Hot water system €29,900,- including VAT Iijdpfx Ajz A S Duefmjg = Further information = Axle configuration Tire size: 385/65R22.5 Suspension: Air suspension Rear axle 1: Max. axle load: 10,000 kg; Tire tread depth left: 70%; Tire tread depth right: 70% Rear axle 2: Max. axle load: 10,000 kg; Tire tread depth left: 70%; Tire tread depth right: 70% Weights Unladen weight: 7,730 kg Payload: 24,270 kg GVW: 32,000 kg Maintenance, history, and condition APK (technical inspection): valid until 05/2027 Technical condition: good Optical condition: good Identification License plate: OH-50-28

Condition: used, Year of construction: 2021, operating hours: 7,246 h, travel distance X-axis: 550 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, rotational speed (min.): 10,000 rpm, spindle speed (min.): 20 rpm, Equipment: chip conveyor, CNC machining center, used Iiedpfjzbvqgox Afmjg Manufacturer: DMG MORI Type: M1 - Plus Year of manufacture: 2021 Purchase / Acceptance: May 26, 2022, as a demonstration machine Operating hours: Spindle: 4,049 h Total: 7,246 h Control system: Siemens Sinumerik 828D + Job Shop Working area: X-axis travel: 550 mm Y-axis travel: 550 mm Z-axis travel: 510 mm Spindle: Speed: 20 - 10,000 rpm Power: 13/9 kW Mount: SK 40 DIN 69871 Tool changer: 24-position Equipment: - Renishaw 3D probe - Renishaw tool probe - Chip conveyor, left side - Coolant gun

Condition: excellent (used), CATALOGUE NUMBER 6946 Iedozr I Rljpfx Afmjig TECHNICAL DATA - Max. working width: 210mm - Max. working thickness: 120mm - Number of spindles: 2 pcs - Spindle diameter: 50mm From above: - 3 infeed feed rollers, rubber, smooth, including 2 double rollers - 2 outfeed feed rollers, rubber, including 1 double roller - Cutterheads on supports - Cutterhead up/down adjustment - Electric adjustment of top cutterhead height - Electric setting of planing thickness - Spindles equipped with brake - Main motor: 2×5.5kW - Stepless feed speed adjustment - Feed motor: 3kW - Feed via Kardana shafts - Extraction nozzle diameter: 2x160mm - Dimensions (L/W/H): 2350x1780x1950mm - Weight: 1882kg – Made in Germany – Jointers for sharpening knives on the cutterhead – 2 Hydro cutterheads included – Not repainted – Very good condition, used planer Net price: 33,900 PLN Net price: 8,070 EUR Net price calculated at 4.2 PLN/EUR (price may change with significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number: 7866 Iedpfozkg H Nex Afmjig TECHNICAL DATA - Max. blade diameter: 300mm - Blade bore diameter: 30mm - Blade guard - Cutting height with installed blade: 250mm, 60mm - Max. cutting width: 600mm - Ability to cut at an angle in the vertical plane – arm or blade movement - Arm rotation left/right - Motor: 3kW - Table size: 1130x1010mm - Extraction port diameter: 50mm - Dimensions (LxWxH): 1150x1190x1510mm - Weight: 220kg ADVANTAGES – Italian-made – Not repainted – DTR technical documentation – Very good condition – Used saw Net price: 6,500 PLN Net price: 1,550 EUR (based on an exchange rate of 4.2 PLN/EUR) (Prices may change subject to exchange rate fluctuations)

Condition: good (used), Schmedt PraForm 21-50 joint-setting press Book press with a joint forming. Production Schmedt, Germany. The machine is in very good condition, ready for production. Technical data: max format: 450 x 520 x 100 mm Weight 264kg Power supply 230V + compressed air. Iedpfx Asz Dfr Ujfmoig

Condition: excellent (used), CATALOGUE NUMBER: 6943 TECHNICAL DATA - Inlet of the loading hopper: 1600x1500mm - Working width of the rotor: 1500mm - Main engine: 45kW - Pump engine: 5.5kW - Number of knives: 44 pcs - Knife dimensions: 50x50mm - Screen: 59mm - Pressing drawer - Auto-reverse - Dimensions (L/W/H): 3430x2800x2850mm - Weight: approximately 9000kg ADVANTAGES - Made in France - New knives installed - Auto-reverse Ijdpfx Afezrna Hemoig - Pressing drawer - Very good condition - Used shredder Net price: 129900 PLN Net price: 30929 EUR Net price calculated based on an exchange rate of 4.2 PLN/EUR (Prices may change in case of significant exchange rate fluctuations)

Condition: used, mileage: 327,750 km, first registration: 03/2004, fuel type: diesel, axle configuration: 3 axles, color: red, gearing type: mechanical, emission class: euro3, loading space length: 4,100 mm, loading space width: 2,480 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, crane, Iveco Trakker 410 SZM interchangeable system with ballast platform + Fassi F360 crane, 6x6 Suspension: leaf spring/air suspension Wheelbase: 1-2 axle 1.85 m 2-3 axle 4.75 m Fassi crane Type: F360BXP.26 Iedpfsy Iib Hox Afmeig 6x hydraulic extension + 3x JIB 4x hydraulic outriggers 1x remote control 5th + 6th control Platform: Length: 4.10 m Width: 2.48 m Height: 0.60 m Equipment: - Engine brake - Tachograph disc - Reversing camera - Electric windows - Cooler box - Radio-CD-AUX - Sunroof - Sun visor - Rear window heating - Trailer coupling (air-ABS-electric) We will also gladly assist you with financing/leasing options through our partners. All information is provided without guarantee. Errors and prior sale are subject to change. Equipment: Crane * Air suspension Air conditioning: Air conditioning system Hydraulic system: None Safety: ABS

Condition: used, driver cabin: other, gearing type: other, Other: * Trade-in and purchase of vehicles and machines possible. * Sales price excluding transportation and transfer. * No liability for printing & typing errors. * Errors, changes and prior sale reserved. * Offer subject to change. * Photos may differ. Price applies to existing condition. * All information without guarantee. Iisdpszu Rnlofx Afmsg - .

Condition: used, total length: 1,400 mm, total height: 2,050 mm, total width: 1,400 mm, Empty weight: 500 kg Price: On request Granulator Dreher S26/26 VS Machine No. K 8329 Built in 1982 Engine 5.5kW Iijdjwh Naijpfx Afmog Speed 1440 Rpm. 2 fixed blades 3 rotating blades (need to be replaced) Funnel opening: 360x240 mm Interchangeable strainer Sieve holes 6mm - Documentation available: No - CE certificate present: No - Main motor power [kW]: 5.5 - Rotation speed [rpm]: 1440 - Opening width [mm]: 360 - Opening length [mm]: 240 - Sieve perforation [mm]: 6 - Number of rotating knives [pcs.]: 3 - Number of fixed knives [pcs.]: 2 - Transport dimensions: 1400mm x 1400mm x 2050mm (l x w x h) - Transport weight [kg]: 500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), CATALOGUE NUMBER: 7133 TECHNICAL DATA - max. width of workpiece: 220mm - max. height of workpiece: 120mm - 5 spindles: 1) horizontal lower 220mm, 5.5kW 2) vertical right 120mm 3) vertical left 120mm; 2 & 3, 11kW 4) horizontal upper 220mm, 11kW 5) horizontal lower 220mm, 5.5kW - all spindles adjustable up/down, left/right - spindle diameter 40mm - pneumatic pressure rollers - from above: 4 infeed rollers, toothed, including 2 double rollers - from above: 1 double outfeed roller, smooth, rubber - from below: outfeed roller, rubber - feed on cardan shafts - feed speed adjustment - feed motor 2.2kW - lifting motor 0.25kW - electric adjustment of planing thickness Iisdpfx Afjzrulcjmeg - length of infeed table 1970mm - central lubrication - diameter of dust extraction nozzle 4x120mm, 140mm - dimensions (L/W/H): 3500x1550x1400mm - weight 1750kg ADVANTAGES - with 5 heads - German production - unpainted - used planer, very good condition Net price: 39900 PLN Net price: 9500 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary with higher fluctuations)

Condition: excellent (used), CATALOG NUMBER 6875 TECHNICAL SPECIFICATIONS - Infeed width: 720 mm - Infeed height: 160 mm - Maximum input material thickness: 160 mm - Shaft width: 720 mm - Shaft diameter: 600 mm - Knife length: 80 mm - Number of knives: 4×12 pcs - Screen size: 25 mm - Infeed pressure feed roller motor: 0.75 kW - Lower toothed feed roller motor: 1.8 kW - Upper toothed feed roller motor: 1.8 kW - Vibrating chute length: 4470 mm - Vibrating chute width: 710 mm - Vibrating chute motor: 2.2 kW - Main motor: 55 kW - Autoreverse (with adjustable control) - Extraction nozzle diameter: 260 mm - Vibrating chute dimensions (L/W/H): 4470/950/930 mm - Machine dimensions (L/W/H): 3100/1500/1170 mm - Total weight: approx. 5500 kg – German manufacture – Very low hours – Original documentation – Used shredder, condition very good / excellent Iodpfxszrm Uie Afmoig Net price: 139,900 PLN Net price: 33,300 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In the event of significant exchange rate fluctuations, the price may be subject to change)