Used Connection for sale (14,339)

Condition: used, Year of construction: 2023, Overview Iiodpfx Amoz Sp Ano Djh Single-module tunnel warmer by TMCI Padovan (SAP-Blendtech), built in 2023 for filled beverage cans. The machine brings cold-filled cans from 5 °C to 25 °C with a 40 °C water spray over a treatment surface of 9 m², at an output of 35,000 cans per hour. It was configured for 0.33 l and 0.15 l cans. The tunnel body, frame and pipework are stainless steel. The machine is steam-heated, with a multi-tubular heat exchanger for condensate recovery, and a Siemens PLC with teleservice and a touchscreen HMI runs the process. The machine is currently installed and was seen in operation. Technical details - Year of manufacture: 2023 - Output: 35,000 cans/h - Can sizes: 0.33 l and 0.15 l, diameter 58.4 mm and 53.3 mm - Treatment surface: 9 m², single deck, 1 module - Treatment time: min. 4.5 minutes - Product temperature: 5 °C inlet, 25 °C outlet - Spray water temperature: 40 °C - Steam consumption: approx. 508 kg/h at 3 bar - Make-up water: approx. 1 m³/h - Instrument air: approx. 500 Nl/h at 6 bar - Installed power: 9 kW - Electrical supply: 400 V, 50 Hz - Conveyor height: 1,200 mm ± 30 mm - Footprint: approx. 6,300 mm long, 2,450 mm wide (3,030 mm including side piping) - Height: approx. 1,800 mm - Service clearance: 800 mm around the machine - Connections: water inlet 15-20 °C max. 2 bar, steam 3 bar, air 1/2" at 6 bar, basin overflow DN 100, basin drain 1 1/2" BSP Equipment - Single-deck tunnel warmer, 9 m², 1 module - Multi-tubular heat exchanger for condensate recovery - 1.1 kW blower for water recovery - Tank with condensate booster pump - Air conditioning unit - Active infeed and outfeed conveyor - Side inspection windows on the spray zone - Siemens PLC with teleservice, touchscreen HMI with process overview - Profinet port, cycle pause and auxiliary start buttons, emergency stop, main switch, signal tower Condition and availability - Built in 2023, currently installed and in operation - Layout drawing available - Availability on request - Location: Albania

Condition: excellent (used), mileage: 686,003 km, power: 261 kW (354.86 HP), first registration: 04/2021, fuel type: diesel, axle configuration: 6x2, wheelbase: 4,150 mm, fuel: diesel, fuel tank capacity: 430 l, brakes: engine braking, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, total length: 6,510 mm, total width: 2,550 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 7,500 kg, permissible axle load (axle 3): 11,500 kg, Equipment: ABS, Bluetooth, EBS, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, fridge, hill-start assist, power mirror, seat heater, soot filter, spoiler, traction control, = Additional Options and Accessories = - Aluminum fuel tank - Rear work lights - Front work lights - Heated mirrors - Leaf spring suspension - Brake booster - Combination lights - DAB radio - Roof spoiler - Differential lock - Mast for visibility - Remote central locking - High beam headlights - Windshield - Enclosed cab - Speed limiter - Interior lights - Cab - Tilting hydraulics - Refrigerator/cooling drawer - Beacons - Air suspension - Air-suspended seats - Air horn - Motorcycle cover - MX engine brake - Parabolic spring suspension - Particulate filter - Radio/CD player - Radio/cassette player - Rotating beacon - Disc brakes - Sleeper cab - Hose connections - Seat heating - Sun visor - Stationary air conditioning - Blind spot camera - Automatic heating system - Tool box - Windscreen - Central lubrication system Iijdoz S Nbdspfx Am Djh - Equipment transfer = Additional Information = General Information Number of doors: 2 Year of manufacture: 2021 Registration number: 91-BRH-7 Technical Information Number of cylinders: 6 Engine displacement: 12,902 cc Transmission Transmission: 12T2210, automatic Axle Configuration Maximum front axle load: 8000 kg Rear axle 1: Lift axle; Max. axle load: 7500 kg Rear axle 2: Max. axle load: 11500 kg Weights Unladen weight: 8,749 kg Payload: 18,251 kg GVW: 27,000 kg Interior Number of seats: 2 Maintenance, History and Condition APK (Technical Inspection): valid until 04.2027 Damage: none

Condition: used, mileage: 44,880 km, power: 96 kW (130.52 HP), first registration: 01/2024, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,950 mm, fuel: diesel, fuel tank capacity: 80 l, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 3, total length: 6,850 mm, total width: 2,150 mm, total height: 3,300 mm, loading space length: 4,240 mm, loading space width: 2,090 mm, loading space height: 2,160 mm, Equipment: ABS, Bluetooth, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, hill-start assist, onboard computer, power mirror, start-stop system, tail-lift, = Additional Options and Accessories = - Automatic low beam headlights - Heated exterior mirrors - Electric front windows - Electrically adjustable exterior mirrors - Euro 6 emission standard - Driver airbag - Remote central locking - Height-adjustable driver's seat - Height-adjustable steering wheel - Collision mitigation by braking - Collision warning system - Leather steering wheel - Lumbar support - Front center armrest - Multifunctional steering wheel - Fog lights - Radio - Radio with DAB - Rain sensor - Lane keeping assist - Immobilizer - Connected services - Windshield heating = Additional Information = General Information Number of doors: 2 Model range: July 2023 - March 2025 Cabin: single Technical Information Torque: 360 Nm Number of cylinders: 4 Engine displacement: 1,995 cc Maximum speed: 157 km/h Iedpfez S E Dbsx Am Djih Dimensions Length/Height: L4 Weights Unladen weight: 2,495 kg Payload: 1,005 kg GVW: 3,500 kg Functional Tail lift: Sörensen, tailgate, 750 kg Interior Interior: black Consumption Average fuel consumption: 9.1 l/100km Maintenance, History, and Condition APK (Technical Inspection): valid until 01/2027 Number of keys: 2 (1 remote) Product Safety Manufacturer: Oostland Automobielen Wasaweg 22 9723JD GRONINGEN, NL

Condition: used, ESPEC Type: PL-3KPH ESPEC Climate Testing Chamber / Environmental Simulation Chamber Model PL-3KPH Air-cooled version For sale is a high-quality ESPEC climate testing chamber for precise temperature and humidity testing in research, development, quality assurance, and industry. The unit is in used condition and can be fully inspected according to the images. The current display shows STOP / ready for operation. Technical data Model: PL-3KPH Iiedoy H H Iuepfx Am Djh Test chamber volume: approx. 400 liters Temperature range: -40 °C to +180 °C Temperature change rate (heating): approx. 3.4 K/min Temperature change rate (cooling): approx. 1.7 K/min Temperature stability (-40 °C to +100 °C): ±0.3 K Temperature stability (+100.1 °C to +150 °C): ±0.5 K Temperature stability (+150.1 °C to +180 °C): ±1.0 K Humidity range: 20 to 98 % RH Humidity stability: ±2.5 % RH Internal dimensions (W x H x D): 600 × 850 × 800 mm External dimensions (W x H x D): 1010 × 1690 × 1195 mm Electrical connection: AC 400 V / 3~ / 50 Hz Weight: approx. 350 kg Cooling: air-cooled (no external water connection required) Refrigerant: R404A Equipment / Features Touchscreen control panel Program and constant operation modes BTHC temperature and humidity control Observation window in the door Stainless steel test chamber Internal lighting / Chamber lamp Side cable entry Overheat protection Hour meter integrated Industrial design For your security as a buyer, please note the following information: The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Scope of delivery ESPEC Climate Testing Chamber PL-3KPH Scope of delivery as shown in the images Condition & Notes Condition: used Inspection possible by arrangement. Loading with a forklift can be organized. (Subject to changes, prior sale, and errors in the technical data!) If you have any questions, please do not hesitate to contact us.

Condition: used, CTS Type: TSS-70/130 Water-cooled cooling unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/130. The device is used for performing temperature shock tests and is typically used in industry, research, and quality assurance. Application areas: Material tests Aging tests Electronics and component tests Temperature shock and cyclic temperature tests Technical data: Type: TSS-70/130 Test volume: 130 liters Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from room temperature to +180°C Cooling rate: approx. 4 K/min from room temperature to -60°C Temperature deviation: ±1 K in time ±2 K spatially Temperature change rate: Iijdpfx Amey Hkd Ho Deh max. 100 K/min on average for shock test tests without heat input Temperature adjustment rate: ≤ 15 min in the range of -65°C to +200°C with 10 kg of ICs Cycle time: < 10 seconds Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 17.2 kW Rated current: approx. 29 A On-site protection: 32 A slow-blow fuse Connection: Cekon 32 Refrigeration system: Refrigerant: R404A / R23 water-cooled, low-noise, fully hermetic Equipment / Features: CTS control panel Microprocessor-controlled control and monitoring system Program operation up to 100 test programs possible digital setpoint and actual value display RS232 interface 2 free switching channels for on-site control of the test specimen Fault message on potential-free contact Load up to 30 V DC, 2 A EMC tested Technical design: Hot and cold chamber Mobile frame with lifting spindle drive Test chamber / mobile frame made of stainless steel, material no. 1.4301 Insert basket made of stainless steel wire Pipe passage NW 50 with sealing plug Compressed air connection 1/4" AG Condensate drain non-pressurized R 1/2" internal thread Safety door lock lockable door with window Dimensions according to installation diagram: External dimensions approx.: 2335 x 940 x 1820 mm Loading dimension approx.: 1990 x 940 x 1652 mm Test chamber dimensions: height approx. 410 mm Width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Other data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh For your safety as a buyer, the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: see pictures (Changes and errors in technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Thermo Fisher Scientific Thermo Fisher Scientific Flash 2000 CHNS O Analyzer with 2 x AI AS 1310 Autosamplers For sale is a used Thermo Fisher Scientific Flash 2000 elemental analyzer. The unit is equipped with two AI AS 1310 autosamplers. It is designed for automated laboratory operation. The system is used for elemental analysis in the laboratory. Sample introduction is performed via the installed autosamplers. Isdpjy D Sqvsfx Am Dsih This enables continuous and automated operation. Equipment and features: Thermo Fisher Scientific Flash 2000 CHNS O Analyzer 2 x AI AS 1310 Autosamplers Front display with status fields for operating states Gas connections for He and O2 RS232 interfaces and other device interfaces Connections for autosamplers and additional modules Power connection 230 V Accessories and parts as shown in the pictures Technical data: Manufacturer: Thermo Fisher Scientific Model: Flash 2000 Voltage: 230 V AC Frequency: 50-60 Hz Fuse: 2 x 6 A Power: 1400 VA Autosampler: Model: AI AS 1310 Supply: 24 V DC Power: 46 W per unit Serial numbers: 420126446 and 420126487 Dimensions (approx.): Main unit: Width approx. 55 to 60 cm Depth approx. 55 to 65 cm Height approx. 50 to 60 cm Overall width with 2 autosamplers approx. 100 to 120 cm Weight (approx.): Main unit: approx. 45 to 60 kg Autosampler: approx. 8 to 12 kg each Total: approx. 60 to 80 kg Condition: Used, with typical signs of wear and tear due to age and use. The condition corresponds to the pictures. Scope of delivery: Flash 2000 Analyzer 2 x Autosamplers Accessories and cables as shown in the pictures Important note: All information has been provided to the best of our knowledge, based on the pictures, nameplates, and manufacturer information. The table shown in the photos and any other items not explicitly mentioned are not included in the sale. Shipping is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by phone.

Condition: used, KUKA Type: KR 10 R900 sixx / KRC4 KUKA industrial robot complete system Robot: KR 10 R900 sixx Controller: KRC4 including KUKA smartPAD, cable set and accessories For sale is a KUKA industrial robot as a complete system from a commercial inventory. The system is ideally suited for automation tasks in industry, laboratories, assembly, handling, pick-and-place applications, testing tasks, and general robot applications. The 6-axis robot is designed for precise and rapid movements and can be used for gripping, positioning, feeding, moving, and processing components. The system offered consists of a robot arm, KRC4 controller, smartPAD, cables, and other accessories as shown in the pictures. Technical data: Manufacturer: KUKA Roboter GmbH Robot type: KR 10 R900 sixx Article No.: 10016515 Serial number: 500874 Payload: 10 kg Reach: 901 mm Axes: 6 Robot weight: 52 kg Controller: KRC4 Article No.: 11019802 Serial number: 224377 Controller weight: 33 kg Controller connection voltage: 1 x 230 V Mains frequency: 50/60 Hz Full load current: 12 A Mains fuse: 16 A Total system weight (approx.): 90–110 kg Robot dimensions (approx.): Reach 901 mm Controller dimensions (approx.): compact KRC4 design Software / Display according to system: KRC SR version: V8.2.3 HMI version: 8.2.0.4 B22 Base system: KSS 8.2.21_SR Installed options according to display: ExpertTech 3.1.1 Gripper-&-SpotTech 3.0.5 OrangeApps.MqttClient 2.2.12 Profinet KRC-Nexxt 2.2.7 RemoteService 1.0.2 UserTech 3.1.4 Description / Functions: The robot can be used for handling and automation processes, e.g. for gripping, transferring, feeding, positioning or processing workpieces. The 6 axes enable flexible movement in space. The compact design and the reach of 901 mm make the system particularly interesting for confined working areas and automated production cells. Total system weight (including controller and accessories, approx.): 90 – 110 kg Condition: used visually with typical signs of wear the screen and system information can be seen in the photos Iisdjy Dt D Djpfx Am Deh the visual condition can be seen in the pictures Scope of delivery: (See picture) KUKA KR 10 R900 sixx robot arm KUKA KRC4 controller KUKA smartPAD Connection and linking cables other accessories as shown in the pictures Important: The images are the only basis for the scope of delivery. "The table shown in the photos is not part of the sale." Commercial sale (Changes and errors in the technical data, information are subject to change!) We are happy to answer any further questions you may have by phone.

Condition: used, SincoTec Type: Exciting Mot Resonance test bench POWER SWINGLY 20 kN The POWER SWINGLY BigTable resonance test bench is designed as a dual-mass vibrator. It consists of a vibration head, which is excited via an asynchronous motor with frequency control and an eccentric motor. The vibration head is located in the upper part of the machine and generates the dynamic amplitude. The vibration head is supported on the upper traverse via pre-tensioned coil springs and is guided centrally. The center load drive is located in the lower part of the machine and applies the static preload with the aid of a geared motor via a spindle drive. The test chamber is located above the mounting table and is bounded upwards by the adjustable traverse. The control of the test bench is carried out by the EXCITING MOT control system. The complete control electronics for the control system are housed in an industrial PC cabinet. The control cabinet is made of powder-coated steel sheet and meets protection class IP 50 according to EN 60529. Technical data: General data of the test bench: Overall height of the test bench 1840 to 2240 mm Height of the machine table 1030 mm Width of the test bench 800 mm Depth of the test bench 1500 mm Height of the test chamber max. 600 mm (without force sensor) Free column passage 550 mm Maximum force amplitude 10000 N Maximum total force ±20000 N Maximum stroke ±5 mm Test frequency 30 to 110 Hz Accuracy of the measuring sensors min. class 1 (according to DIN EN 10002-3) Weight of the test bench approx. 1880 kg Max. weight of the clamping device 150 kg General data of the control cabinet: Iijdjzii Awjpfx Am Djh Overall height of the control cabinet 1900 mm Height of the table top 1080 mm Width of the control cabinet 650 mm Depth of the control cabinet 700 mm Weight of the control cabinet 152 kg Color RAI 9006 (white aluminum), table top Midnight Conditions for the installation site: Space requirement 2.5 x 2.5 m Required ceiling height 2.8 m Floor load-bearing capacity 170 N/cm² Voltage supply 400 V / 50 Hz (right-rotating field) Connection plug CEE socket, 5-pole, 16 A Fuse 16 A Connection and environmental conditions Mains conditions: Voltage 400 V three-phase with PE conductor and protective earth, right-rotating field Voltage fluctuations < ± 10% Short-time voltage dips < 20 ms Limits for permanent interference Radio interference level A according to VDE0871 Frequency 50 Hz ± 1% Protective earth Ground resistance < 0.3 Ω Model: POWER SWINGLY MOT Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, CTS Type: T-70/600/S Water-cooled temperature testing chamber Control: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for external control of the test item Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat radiation approx. 2500 W at +20°C approx. 2500 W at +0°C approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test item, without radiation, and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Rated current 14.8 A Iijdpfx Amjzg Ty Is Djh Protection class IP 22 Refrigerant: R404A / R23 Weight approx. 700 kg For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, Trumpf Type: TC 6000 L 1300 Laser and punching machine Technical data: Power supply: 400V/50 Hz Fuse rating: 3 x 100 A Connected power: 65 kVA Working area X x Y without repositioning: Combined operation: 2585 x 1280 mm Punching operation: 2585 x 1370 mm Laser operation: 2585 x 1280 mm Performance: Laser: 2000 W Maximum sheet thickness: 8 mm Maximum punching force (including 20 kN holding-down device): 220 kN Active holding-down device (programmable in stages): 4.5-20 kN Maximum workpiece weight: 200 kg Maximum clearance height: In punching operation: 35 mm In laser operation: 22 mm Speeds: X-axis: 90 m/min Y-axis: 60 m/min Simultaneous movement: Punching: 900 min Marking: 2800 min C-axis: Punching: 60 revolutions/min Thread forming: 330 revolutions/min Tools: Tool stations on linear magazine: 19 with 2 grippers Iiodpezd Ulasfx Am Doh Number of tools when using a multi-tool: 19 to 190 tools Rotation of all tools: 360° Tool change time: 1.5-5 s Maximum punching diameter: Single stroke: 76.2 mm on all tool stations Standard multi-cut: 200 mm Maximum bending height: 25 mm Maximum part size: 500 x 500 mm Accuracy: Positioning deviation: ± 0.1 mm Average position spread: ± 0.03 mm TRUMPF CNC control: Base: Siemens SINUMERIK 840D Loading and dismantling must be handled by the buyer! Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss Type: SB2/500/80 Water-cooled climate testing chamber Cold-heat operation: -75°C ... +180°C Climate operation: +10...+95°C Humidity range: 10...98 % RH Temperature stability, over time: ± 0.2K Humidity stability: ±1 % RH Temperature change rate: Cooling: approx. 1.4 K/min Iodezd Ultspfx Am Deih Heating: approx. 2.5 K/min External dimensions: Height 1980 mm, Width 1265 mm, Depth 1365 mm Connections: Left side: ∅ 100 mm Right side: ∅ 50 mm The connection voltage is: 400V/3Ph+N+PE/50 Hz Power: 10.4 kVA Weight: approx. 720 kg Refrigerant: R404a / R23 For your security as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, H. Köhler KG Kesternich Testing Device / Corrosion Test Chamber H. Köhler HK 320 BF Kesternich Testing Device Corrosion test chamber for SO₂ corrosion tests For sale is a used corrosion testing device from the manufacturer H. Köhler KG. The device is used for carrying out Kesternich tests under a sulfur dioxide-containing atmosphere and is suitable for corrosion investigations on materials, surfaces, and coatings. Technical data Manufacturer: H. Köhler KG Type: HK 320 BF Device type: Kesternich testing device / corrosion test chamber Test chamber volume: approx. 300 liters Internal dimensions: approx. 725 x 500 x 750 mm External dimensions: approx. 1070 x 570 x 1970 mm Temperature range: RT +5 °C to 60 °C Expandable to approx. 75 °C according to manufacturer's specifications Power connection: 220 V / 50 Hz Power consumption: 1,000 W Compressed air supply: approx. 4.5 - 8 bar Equipment Stainless steel test chamber Large viewing windows Front door with locking mechanism Test specimen carrier / frames SO₂ gas system Pressure gauge Manual controls Base frame with storage area Areas of application Corrosion testing Coating testing Material testing Quality assurance Automotive industry Research and development Ijdpfx Amozclxve Deih Condition Used Signs of wear and tear due to age and use Optical condition as shown in the pictures Scope of delivery as shown in the pictures Scope of delivery 1x H. Köhler HK 320 BF Kesternich testing device Accessories as shown in the pictures Shipping is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Stäubli Type: TX90XL robot / CS8C controller Six-axis robot with controller For sale is a Stäubli TX90XL 6-axis industrial robot, including a CS8C controller and the original teach pendant. The TX90XL is suitable for pick & place, assembly, machine loading, part handling, as well as automation, testing and training applications. The XL version offers a large reach for flexible applications. Programming is done via VAL3. Technical data – Robot: Type: TX90XL Axes: 6 Payload: 4 kg Reach: approx. 1,400 mm Repeatability: ±0.035 mm Protection class, wrist: IP65 / IP67 Mounting: Floor / Wall / Ceiling Weight: approx. 115 kg Technical data – Controller: Controller: Stäubli CS8C Software: VAL3 Programming languages: VAL3, PLC IEC 61131-3 Interfaces: Ethernet, fieldbus, digital I/O, serial interfaces Supply: 3 × 400 V, 50/60 Hz Isdpfezix Uiox Am Dsih Power consumption: approx. 2000 VA Protection class: IP20 Weight, controller: approx. 50 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) Stäubli TX90L robot arm CS8C controller Original teach pendant Connection cable (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Weiss Type: WK11 - 600/70/5 Weiss Climate Chamber, Water-Cooled The Weiss climate chamber WK11-600/70/5, with an approximate usable volume of 600 liters, is suitable for temperature and humidity testing as well as for conditioning samples and materials in the range of -70 °C to +180 °C. Simcon/32 - Net Controller Technical Data: Test chamber designation: WK11-600/70/5 External dimensions with hinges and door closure: Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door closure: Height 1995 mm, Width 1000 mm, Depth 800 mm Internal dimensions: Height 950 mm, Width 800 mm, Depth 800 mm Connections: 2x R1 NW 125 mm ∅ 1x L1 NW 50 mm ∅ Test chamber volume: approx. 600 liters Data for temperature tests: Temperature range -70 °C to 180 °C Temporal temperature deviations in the center of the usable space: ± 0.1 to ± 0.5 K Spatial temperature deviations: ± 0.5 to ± 2 K Temperature gradient: 1 to 4 K Temperature change rate: Heating: 6 K/min Cooling: 6 K/min Thermal compensation: at +20 °C: 5000 W at -20 °C: 5000 W Data for climate tests: Temperature range +10 to +95 °C Humidity range 10 to 98 % RH Temporal temperature deviations in the center of the usable space: ± 0.1 to ± 0.3 K Spatial temperature deviations: ± 0.5 to ± 1 K Temperature gradient: 1 to 2 K Temporal humidity fluctuation in the center of the usable space: ± 1 to ± 3 % RH Thermal compensation: 500 W 3/N/PE AC 400V ±10% 50Hz Rated power: 16.5 kW Rated current: 29 A Fuse on customer side: 32 A slow-blow Permissible weight of test specimen: Total load of the shelf supports: 80 kg Test chamber floor: 80 kg, insert shelf: 40 kg Weight: 675 kg Refrigerant: R452A / R23 Important note: "The table shown in the photos is not included in the sale." For your safety as a buyer, please note the following information! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate Iisdpfxezimg Hs Am Djh 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss   Weiss Technik TS 60 Thermal Shock Test Chamber / 60 L, –71…+220 °C Water-cooled   Item description:   For sale is a Weiss Technik TS 60 thermal shock test chamber. The chamber is ideally suited for rapid temperature cycling tests (e.g., according to IEC, MIL-STD, JEDEC) and has been well maintained.   Volume & Internal Dimensions:   Test volume: 60 liters   Internal dimensions of basket / test chamber (W × D × H): approx. 380 × 430 × 370 mm External dimensions (W × D × H): 895 × 1970 × 1895 mm   Temperature ranges & cycling   Hot chamber +50 °C to +220 °C Cold chamber −72 °C to +70 °C   Transfer time (basket between both zones): < 10 seconds   Heating rate / heating speed up to 17 °C/min Cooling rate / cooling speed up to 3.7 °C/min   In single mode (cold zone only), heating rate: approx. 3.2 °C/min   Temperature deviation & homogeneity   Temporal deviation (temperature control over time): ± 0.3 to ± 1.0 °C   Load / payload & lifting system   Basket / lifting system load: 20 kg maximum load capacity Transfer basket secured by protective grilles on all sides   Other features & equipment   Noise level: approx. 58 dB(A) during operation Control: Touchscreen, RS-232 / USB / Ethernet interfaces   Electrical connection: 3/N/PE AC 400 V ±10% 50 Hz Rated power approx. 8.5 kW Rated current approx. 25 A Fuse on customer's side 32 A Refrigerant R-404A / R-23   Weight: 800 kg Ijdpfjzii A Rex Am Dsih   For your safety as a buyer, please note the following:   The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run.   Condition: used   Scope of delivery: (See image)   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Condition: used, H. KÖHLER GmbH Condensation Water Test Device / Corrosion Test Cabinet H. KÖHLER HK 300 S Condensation Water Climate Test Device according to DIN 50 017 For sale is a used condensation water test device from the manufacturer H. Köhler GmbH. The device is suitable for corrosion tests, condensation water climate tests, material testing, coating testing, paint testing, and quality assurance. Technical Data Manufacturer: H. Köhler GmbH Iijdpfszhadcsx Am Dsh Type: HK 300 S Device Type: Condensation Water Test Device / Corrosion Test Cabinet Test Standard: DIN 50 017 Test Chamber Volume: approx. 300 liters Temperature Range: Room temperature to approx. +55 °C Humidity Range: Saturation operation possible Test Chamber Heater: 1,000 W Power Connection: 230 V / 50 Hz Connected Load: 1,000 W Compressed Air Consumption during Ventilation: approx. 3 Nm³/h Compressed Air Connection: 4.5 - 7.0 bar Deionized Water Connection: 2.5 - 4.0 bar Dimensions without Brine Tank: Width: approx. 1,200 mm Depth: approx. 600 mm Height: approx. 1,750 mm Weight: approx. 100 kg Control System HK PC102 Control LCD Display Programmable Test Cycles Condensation Water Climate according to DIN 50 017 Manual Operation / Test Operation Heater 1 / Heater 2 Alarm Display Equipment Stainless Steel Test Chamber Large Glass Door with Seal Test Chamber Thermometer Manometer Ventilation System Compressed Air Connection Deionized Water Connection Drain Connection Stainless Steel Base with Castors Accessories as shown in the pictures Application Areas Condensation Water Testing Corrosion Testing Coating Testing Paint Testing Material Testing Automotive Industry Quality Assurance Research and Development Condition Used Optical Condition as shown in the pictures No documentation available Scope of Delivery H. Köhler HK 300 S Condensation Water Test Device Stainless Steel Base Accessories as shown in the pictures The other items visible in the pictures, which are not explicitly described, are not included in the scope of delivery. Shipping or freight shipping is possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: excellent (used), ALKO Power Unit 250 P – used – clean air extraction unit Air filtration using filter hoses, pneumatic cleaning, movable collection container, automatic fire extinguishing system ----- Technical data ----- Extraction nozzle diameter: 250 mm, Ijdpfxozzn Iis Am Deih Nominal volume flow: 3,534 m³/h, Number of bags: 2, Motor: 7.5 kW, Compressed air connection: 6 bar, Dimensions (L x W x H): 2,420 x 1,000 x 2,360 mm, Weight: 758 kg Quality information: - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Ready for immediate use

Condition: used, Keysight Mixed Signal Oscilloscope / Digital Storage Oscilloscope Keysight / Agilent InfiniiVision MSO-X 3034A 350 MHz Mixed Signal Oscilloscope with 4 analog channels, 16 digital channels, and 4 GSa/s sampling rate For sale is a used Mixed Signal Oscilloscope from the manufacturer Keysight Technologies / Agilent Technologies. The device is suitable for precise signal and measurement tasks in development, laboratories, service, training, research, as well as industrial electronics and quality assurance. Technical data Manufacturer: Keysight Technologies / Agilent Technologies Type: MSO-X 3034A Series: InfiniiVision Device type: Mixed Signal Oscilloscope / Digital Storage Oscilloscope Bandwidth: 350 MHz Analog channels: 4 Digital channels: 16 Max. sampling rate: 4 GSa/s Display: Color display MegaZoom technology Inputs: 4x analog BNC inputs Digital input / Logic connector USB port USB Device / USB Host Trigger Out Ext. Trigger / Calibration connector Power connection: 100 - 240 V AC 50 / 60 Hz Power consumption: max. 100 W Dimensions: approx. 381 × 204 × 142 mm Weight: approx. 4 kg Features Large color display Front-panel control buttons 4 analog channels 16 digital channels USB interfaces Trigger functions Analysis functions Measurement functions Storage and printing functions Carrying handle Iisdpszh I Dwefx Am Deh Accessories as shown in the pictures Application areas Electronics development Laboratory Service Troubleshooting Signal testing Printed circuit board testing Training Research and development Quality assurance Industrial electronics Scope of delivery Keysight / Agilent InfiniiVision MSO-X 3034A 3x probes as shown in the pictures Power cable Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures Device can be switched on Display and operation appear to be functioning properly Test seals / stickers as shown in the pictures are present Weight: approx. 4 kg The table shown in the photos or other items not explicitly mentioned are not included in the sale. Shipping is possible. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, Weiss Umwelttechnik GmbH Salt spray chamber / Corrosion test cabinet Weiss SC/KWT 450 salt spray chamber Testing system for corrosion, salt spray, and condensation water tests For sale is a used salt spray chamber from the manufacturer Weiss Umwelttechnik GmbH. The system is suitable for corrosion tests, coating tests, material tests, quality assurance, and long-term durability tests under standardized environmental conditions. Technical data Manufacturer: Weiss Umwelttechnik GmbH Type: SC/KWT 450 Equipment type: Salt spray chamber / Corrosion test cabinet Test chamber volume: 450 liters Test chamber dimensions: approx. 850 x 570 x 740 mm (W x D x H) External dimensions: approx. 1930 x 800 x 920 mm (W x D x H) Weight: approx. 180 kg Max. load: 100 kg Brine reservoir: 180 liters Salt spray test: Room temperature to +50 °C Condensation water test: Room temperature to +45 °C Humidifier temperature: up to +75 °C Standards: DIN 50021 Salt spray test DIN 50017 Condensation water test KFW DIN 50014 Normal climate (ventilation) Power connection: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.0 kW Rated current: 8.5 A Equipment Programmable control Test chamber with sample holders Brine supply system Air purification Documentation / Service documents available Accessories as shown in the pictures Application areas Corrosion testing Salt spray tests Coating testing Automotive industry Isdpozd Axbsfx Am Deih Material testing Quality assurance Research and development Scope of supply 1x Weiss SC/KWT 450 salt spray chamber Documentation / Service manual Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures The table shown in the photos or other items not explicitly mentioned are not part of the sale. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Atlas Xenon Weather-Ometer / Weathering Test Device Atlas Ci3000+ Xenon Weather-Ometer Xenon test device for artificial weathering and light aging For sale is a used Xenon Weather-Ometer from Atlas Material Testing Technology LLC. The device is suitable for weathering tests, light aging, material testing, quality control, research and development, as well as aging tests for plastics, paints, coatings, and materials. Technical data Manufacturer: Atlas Material Testing Technology LLC Type: Ci3000+ Model: Ci3000+ Weather-Ometer Device type: Xenon Weather-Ometer / Weathering Test Device Year of manufacture: 12/2010 Light source: Xenon arc lamp Lamp rated power: 4,500 W Iisdpfszf D Rnox Am Doh Operating range Xenon lamp: 1,700 – 4,500 W Device model according to display: Ci3000+ W Sample sensor 1: Black standard Sample sensor 2: Black panel Light sensor 1: CI 300 – 400 nm Light sensor 2: CI 420 nm Mains connection: 220 / 380 V Frequency: 50 Hz Connection type: 3/N/PE Rated current: 50 A Power consumption: 9.5 kW Control voltage: 24 VDC Compressed air supply required Operating pressure: 80 – 100 PSI (552 – 689 kPa) Compressed air consumption: approx. 4 CFM (0.11 m³/min) Dimensions: approx. 950 x 730 x 1830 mm (W x D x H) Required footprint: approx. 1050 x 2030 mm (W x D) Weight: approx. 404 kg Minimum distance exhaust hood: approx. 102 mm to 152 mm Equipment Touchscreen control panel Xenon burner Test chamber with sample rack Black standard sensor Black panel sensor CI 300 – 400 nm light sensor CI 420 nm light sensor Water-cooled lamp system Exhaust connection Interface connections Integrated humidification system Documentation / Documents as shown in the pictures Accessories / Documents Atlas Weathering Testing Guidebook Atlas Weather-Ometer Auxiliary Filter Lantern Kit Instructions Documentation as shown in the pictures Accessories as shown in the pictures Areas of application Artificial weathering Light aging testing UV and Xenon testing Material testing Plastic testing Paint and coating testing Colors and pigments Textiles Packaging Automotive industry Construction and materials testing Quality assurance Research and development Condition Used Good optical condition Optical condition as shown in the pictures Scope of delivery 1x Atlas Ci3000+ Xenon Weather-Ometer Available accessories as shown in the pictures Available documentation as shown in the pictures The table shown in the photos, as well as any other items not explicitly mentioned, are not included in the sale. Shipping or freight shipping possible. (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Mitutoyo   Quick Vision Apex QV-X404P1L-C CNC Image Processing Measuring Machine / Optical Measuring System   Manufacturer: Mitutoyo Corporation Type: QV-X404P1L-C Code No.: 363-131EU Professional CNC image measuring system for non-contact dimensional measurement tasks   For sale is a used Mitutoyo Quick Vision Apex CNC image processing measuring machine, including existing PC system, two monitors, control unit, measuring software, and extensive documentation.   The existing PC system and the installed QVPAK software start up. Iijdeztyabopfx Am Djh However, the complete machine and measuring function could not be fully tested.   The Quick Vision series is used for non-contact dimensional measurement of workpieces by means of an optical system, image acquisition, and image processing. Suitable for precise measuring and testing tasks, among others, for components from the fields of electronics, precision mechanics, and industrial manufacturing.   Technical data:   Manufacturer: Mitutoyo Corporation Model: Quick Vision Apex Type: QV-X404P1L-C Code No.: 363-131EU Country of Manufacture: Japan Machine type: CNC image processing measuring machine   Measuring range X / Y / Z: approx. 400 × 400 × 250 mm Measuring principle: non-contact optical image measurement CNC-controlled measuring system   Existing measuring software: Mitutoyo QVPAK QVPAK (R): Version 7.502.0010 QVGEO: Version 7.502.0010 Statistics: Version 7.502.0010   Equipment:   Mitutoyo Quick Vision Apex measuring machine PC workstation Fujitsu Siemens CELSIUS PC system 2 Fujitsu monitors Keyboard and mouse Mitutoyo control unit / joystick with emergency stop QVPAK measuring software Mitutoyo MCOSMOS / MiCAT data carriers GEOPAK documentation QVPAK documentation Other Mitutoyo operating manuals and documents Clamping plate / workpiece fixture as shown in the pictures Connection cables and accessories as shown in the pictures   Application areas:   Optical dimensional inspection Non-contact workpiece measurement Quality assurance Precision metrology Component and contour inspection Manufacturing and process control   Scope of delivery:   Mitutoyo Quick Vision Apex QV-X404P1L-C with PC workstation, monitors, control unit, existing software, documentation, and accessories as shown in the pictures. Scope of delivery is limited to what is shown in the pictures.   Condition:   Used Optical condition according to pictures PC system and existing QVPAK software start up. Signs of wear and tear due to age and use are present. Visible damage / signs of wear are present on the machine housing, see pictures.   Important note: The machine has not been tested, as it is in a protective mode after being moved. This is also intended by the manufacturer when transporting the machine. The machine must be recommissioned by qualified Mitutoyo personnel.   Shipping by freight forwarder is possible. Subject to changes, errors and prior sale.   We would be happy to answer any further questions by telephone.

Condition: used, Weiss Technik Salt spray chamber / corrosion test cabinet Weiss Technik SaltEvent SC 1000 Corrosion test equipment / salt spray test chamber For sale is a used Weiss Technik SaltEvent SC 1000 salt spray chamber. The device is suitable for corrosion tests, salt spray tests, material testing, surface testing, quality assurance, as well as research and development. Technical data Manufacturer: Weiss Technik GmbH Iedpfx Amezg Er Aj Deih Type: SaltEvent SC 1000 Device type: Salt spray chamber / corrosion test equipment Year of manufacture: 2019 Test chamber size: Size 1000 liters Rated voltage: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.6 kW Rated current: 11.3 A Customer-side fuse: 16 A slow-blow Weight: approx. 370 kg Overall dimensions according to layout drawing: approx. 2910 × 900 × 960 mm Max. test chamber load: 150 kg Floor grid load: 150 kg Insertion rods: 8 kg per rod Shelf for machine part covers: 5 kg Temperature range salt spray test: Ambient temperature +5 K to +50 °C Temperature range condensation test: Ambient temperature +5 K to +42 °C Temperature compressed air humidifier: Ambient temperature +5 K to +70 °C Temperature stability over time: ±1 K Salt solution consumption during salt spray test: approx. 0.5 to 1.5 l/h Equipment S!MPAC control system WEBSeason / color control panel Touch operating panel Test chamber hood Storage tank Control cabinet Floor grid / test chamber grid Compressed air humidifier Hood locking Temperature monitoring Interface Documentation as shown in the pictures Connections / media supply Power connection: 230 V / 50 Hz Compressed air connection available Connection for demineralized water available Exhaust connection available Water drain / condensate drain available Application areas Salt spray test Corrosion test Condensation test Material testing Surface testing Coating testing Automotive Quality assurance Research and development Condition Used Optical condition as shown in the pictures. Scope of supply 1x Weiss Technik SaltEvent SC 1000 salt spray chamber Storage tank Accessories as shown in the pictures Documentation as shown in the pictures The table shown in the photos and any other items not explicitly mentioned are not included in the sale. Inspection possible by appointment. Loading with a forklift is available. Shipping or freight forwarding is possible. Subject to change, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Anton Paar Modular Rotational Rheometer / Precision Rheometer Software: Anton Paar Rheoplus (original CD included) Device driver and license diskette available Anton Paar Physica MCR 301 Professional rotational and oscillatory rheometer for research, development, quality control and material testing For sale is a used rotational rheometer from the manufacturer Anton Paar. The device is suitable for highly precise rheological characterization of liquids, polymers, dispersions, emulsions, pastes, gels and other materials. The MCR 301 is one of the professional laboratory instruments for research, development, quality assurance and industrial material testing. Technical data: Manufacturer: Anton Paar GmbH Type: Physica MCR 301 Device type: Modular rotational rheometer Measuring principle: Rotational and oscillatory rheometer Drive: Air-bearing EC servo motor (Air Bearing Technology) Normal force measurement integrated Modular measuring system for different measuring geometries Power connection: AC 100–240 V Mains frequency: 50–60 Hz Power consumption: 850 W PC connection: RS-232 / Ethernet (depending on the configuration) Software: Anton Paar Rheoplus Operation via LCD display and membrane keypad Environmental conditions: Operating temperature: 15 °C to 35 °C Recommended ambient temperature: 23 °C ±3 °C Storage temperature: -20 °C to +50 °C Relative humidity: 20–60 % (non-condensing) Dimensions: approx. 610 × 420 × 670 mm (L × W × H) Weight: approx. 48 kg Measurement possibilities: Rotational measurements Oscillatory measurements Viscosity measurements Flow curves Shear stress Creep tests Relaxation measurements Amplitude sweeps Iisdpfxjzicwuj Am Deh Frequency sweeps Material characterization Equipment: Air-bearing precision drive LCD display with control panel Electronic control Measuring head Measuring platform PC interfaces Rheoplus software CD Original documentation Operating manual Diskette with software data Connection cable Accessories as shown in the pictures Application areas: Research & Development Laboratory Quality assurance Chemical industry Pharmaceutical industry Cosmetics industry Food industry Polymer technology Materials science Universities Testing laboratories Scope of delivery: Anton Paar Physica MCR 301 Original Rheoplus software CD Original operating manual Documentation folder Diskette Connection cable Other accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age are present. Nameplate is present. The table shown in the photos or other items not explicitly mentioned are not included in the sale. Shipping by freight forwarder or parcel service is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone or email.

Condition: used, GE Druck Modular High-Precision Pressure Controller / Pneumatic Pressure Controller PACE5000 Professional High-Precision Pressure Controller for calibration, pressure testing, automation, and laboratory applications For sale is a used high-precision pressure controller from the manufacturer GE Druck. The PACE5000 is a modular, high-precision pressure control system designed for the most demanding applications in calibration laboratories, research, development, production, and quality assurance. Due to its high control speed and precision, the device is ideally suited for automatic pressure tests, calibration tasks, and industrial measuring and testing systems. Technical data: Manufacturer: GE Druck (Baker Hughes) Model: PACE5000 Device type: Modular High-Precision Pressure Controller Pneumatic Control Module: CM0-B-16G Dimensions: approx. 440 × 88 × 320 mm (W × H × D) Weight: approx. 10.1 kg Control range: -1 to 70 bar(g) Maximum permissible operating pressure (MWP): 94 bar Accuracy: up to 0.001% of the final value (model-dependent) Long-term stability up to 0.001% FV Features: Modular control system Very high pressure control speed Automatic pressure control Pressure testing Leak test function Burst test Switch test Programmable test sequences User-defined pressure units Display: Color touch display Graphical user interface Display of setpoint and actual value Intuitive menu navigation Interfaces: Ethernet USB Host USB Device RS-232 CAN IEEE-488 (GPIB) 24 V DC inputs/outputs Pneumatic connections: Supply Output Vent Reference G1/8" connection Power connection: 100–230 VAC Iijdpfx Amsziyqro Doh 50–60 Hz Power consumption: max. 100 VA Application areas: Calibration laboratory Testing systems Quality assurance Automotive industry Aerospace Mechanical engineering Measurement technology Research & Development Automation technology Pressure sensor calibration Equipment: Color display Pneumatic Control Module Ethernet USB RS232 CAN IEEE-488 (GPIB) Pressure connections Power cable Accessories as shown in the pictures Scope of delivery: GE Druck PACE5000 Power cable Accessories as shown in the pictures Weight: approx. 10.1 kg Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age are present. The table shown in the photos and any other items not explicitly mentioned are not included in the sale. Shipping via parcel service or freight forwarder is possible. Subject to changes, errors, and prior sale. We will be happy to answer any further questions by telephone or e-mail.

Condition: used, FRIULAIR Industrial Chiller / Water Cooler / Chiller Friulair CWE068 Nominal cooling capacity 48.5 kW according to the nameplate Year of manufacture 2023 – air-cooled industrial chiller with integrated water circuit For sale is a used industrial chiller from the manufacturer Friulair S.r.l., model CWE068. The chiller is suitable for cooling industrial plants, machines, test benches, production facilities, and process circuits. The CWE series is designed as an air-cooled water cooling system for industrial continuous applications. Technical data: Manufacturer: Friulair S.r.l. Model: CWE068 Code: CWE068CQ27151 Type of equipment: Industrial chiller Year of manufacture: May 2023 Country of manufacture: Italy Cooling capacity according to the nameplate: 48.5 kW Operating conditions according to the nameplate: Ambient air: 35 °C Water inlet: 12 °C Water outlet: 7 °C Refrigerant circuit: Refrigerant: R410A Filling quantity: 6.0 kg Refrigerant circuit volume: 3.2 liters CO₂ equivalent: 12.53 t GWP: 2088 Max. operating pressure high-pressure side: 41.5 bar Max. operating pressure low-pressure side: 29 bar Temperature range refrigerant circuit: -10 °C to +120 °C Water circuit: Water volume: 200 liters Max. operating pressure: 6 bar Temperature range water circuit: -10 °C to +30 °C Electrical data: Power connection: 3 / 400 V AC ±10 % / 50 Hz Electrical power according to the nameplate: 24.1 kW Current draw: 41.3 A FLA: 47.4 A Fuse rating: 63 A Protection class: IP54 Equipment: Air-cooled chiller Iijdozy U Uaepfx Am Deh Axial fans Integrated refrigerant circuit Integrated water circuit / buffer tank Circulating pump Manometers for high and low pressure Pressure gauge water circuit Main switch Electrical control Hydraulic inlet and outlet connections Closed industrial housing Applications: Industrial cooling Process cooling Machine cooling Test bench cooling Production facilities Machine tools Laser systems Plastics processing Electronics and power electronics testing Research and development Dimensions / Transport: Dimensions (L × W × H): approx. 1,890 × 925 × 1,615 mm Empty weight: approx. 390 kg The transport data is based on the manufacturer's information for the corresponding CWE model size. The actual external dimensions can be checked again before shipment. Condition: Used Year of manufacture 2023 Optical condition according to the pictures. Scope of delivery: 1 x Friulair CWE068 industrial chiller Equipment and connections as shown in the pictures Otherwise, the scope of delivery is as shown in the pictures. Shipping by freight forwarder is possible. Subject to change, errors and prior sale. We will be happy to answer any further questions by phone.