Used Coperion Extruder for sale (383)

Condition: used, Year of construction: 2000, functionality: not functional, CLEARANCE SALE WILL BE SOLD TO HIGHEST BIDDER ON 'FIRST COME - FIRST SERVE BASIS' ; IMMEDIATE SHIPPING POSSIBLE LIST OF OTHER MACHINES FROM SAME MILL AVAILBLE UPON REQUEST Isdpey Splgefx Ag Ueic BARMAG EXTRUSION SPINNING LINE WITH 12 POSITION , 72 SPINNING ENDS FOR PET POY MICROFILAMENT YARN , evospeed • MANUFACTURER : BARMAG , GERMANY • AGE : INSTALLED IN 1998/ 9, STARTED UP IN 2000 ! BUT ONLY USED FOR 3-4 YEARS, THEREAFTER MAINTAINED & KEPT MOTHBALLED - 12 WINDERS, BARMAG CW6-1200/6 , 6 ENDS PER CHUCK 1 EXTRUDER BARMAG 12 E 8 • SPIN BEAM INCLUDING SPIN PACKS & SPIN PUMPS 3,5 CC/U • SPINNERETTES 100MM DIA, BOTTOM LOADED, DESIGNED FOR HIGH COUNTS MICRO & SUPERMICRO • POLYMER MANIFOLD EXTRUDER TO SPIN BEAM • DOWTHERM MANIFOLD FOR SPINBEAM AND POLYMER MANIFOLD • QUENCH SYSTEM INCLUDING FINISH SYSTEM, SPINFINISH JETS BY 'KYOCERA' • WITH CONVENTIONAL QUENCHING CABINETS + EVOSEPEED & RADIAL TYPE • TAKE UP UNITS, INCLUDING: • TAKE UP SECTIONS / PLATFORMS / LADDERS • COLD GODETS, ONE PAIR PER POSITION • INTERLACE SYSTEM WITH HEBERLINE INTERMINGLING JETS • YARN SUCTION SYSTEM • 12 WINDERS, BARMAG CW6-1200/6 , 6 ENDS PER CHUCK • + ONE SPARE WINDER

Year of construction: 2014, condition: excellent (used), ANKELE 2 BAND CATERPILLAR BAP 375-70 1A Iiedpfeu Skmwjx Ag Uoc

Condition: used, The HERBOLD Plastkompaktor is a system for agglomerating films, fibres, chips, dust and flakes. Poorly free-flowing waste is transformed into an agglomerate with a high bulk density and good flowability, which can therefore be fed directly into extruders and injection moulding machines. The system for sale has a main motor with 110 kW drive power and a throughput of 600 to 2000 kg/h depending on the feed material. All thermoplastics can be processed, even sensitive materials such as PET, PA and bioplastics can be agglomerated without thermal damage or discolouration. The system consists of the feeding device with silo, the compactor, a secondary granulator with sifting and fines return. On request, pre-shredding can be offered that is customised to the task at hand Trials can be carried out in our technical centre for suitability tests and sampling. Iedpjy Tiygjfx Ag Ujic We are the manufacturer of this system and can guarantee service and spare parts supply. The system is available at short notice!

Condition: refurbished (used), functionality: fully functional, Extrusion Screen Changers - Continuous Screen Changers Double Piston Filter Iisdpfxsh Itl Ss Ag Uoc - - Immediately available, on request also with control, hydraulic unit. When making your request, please let us know your desired capacity and the material so that we can offer you the right filter.

Condition: used, Year of construction: 1997, CMT Cheese Stretching and Moulding Line . CMT FL 1400 / Boilers/ Tanks/ Moulding / Extruding . CMT Cheese Cooking, Stretching and Moulding Line Screw Hopper for Cheese Transfer Moulding Machine with 2 Sets of Moulds Boiler and Hot Water Tanks Control Panel Manual Book Technical Manual Condition : Good Location : Use: Cheese Cooking, Stretching and Moulding Iedpoy Ddwbsfx Ag Usic

Year of construction: 2014, condition: used, Cannon/Breyer Combined extrusion thermoforming line (2014) for producing of continuous 6-layer PE plate to thermoform automotive tanks 1500x1600mm max. plate size 500 x 500mm min. plate size to be processed 10mm max. plate thickness 4,0mm min. plate thickness 24kg approx. max. plate weight (at 1600x1500x10 mm) 700mm approx. processing height 1.100 to 1.170 kg/h max. capacity - approx. 27 tanks per hour Comprising: Breyer Extrusion Line composed of - Breyer Extruder 105mm for HDPE and Master batch - Breyer Extruder 120mm for HDPE Regrind - Breyer Co-Extruder 45mm for HDPE ADMER - Breyer Co-Extruder 45mm for HDPE EVOH LDPE - Breyer Extruder 105mm for HDPE Cannon thermoforming press (7x) Kuka Industrial robots for plate supply to press, feeding of internal tank parts, unloading from press, edge trimming, loading/unloading to calibration station FDM/Piovan batch supply Vacuum supply Tempering units for tooling Iiodpfjy Uligjx Ag Usc PLEASE NOTE: Tooling/moulds and any product related gripping tools are not included! Combination Lotting: The complete Line CET 1 is lotted as a single combination Lot 29381-36 Its components are simultaneously offered as individual Lots 29381-39, -40, -42, -45, -46, -47, -50, -53, -55, -59, -62, -64, -71, -75, -77, -78, -81, -85, -86, -87, -88, -91, -94, -97, -98, -104, -108, -111, -114, -120 Bidders can bid on the complete line and/or on individual lots. Sales are conditional subject to seller approval. It is likely that the seller will approve the highest aggregate bid for the line either as a single lot or as individual lots. Successful bidders will be notified within 2 working days.

Condition: used, Year of construction: 2000, machine/vehicle number: SO126, Used HDPE Extrusion Blow Molding Machine for 10 L – 300 bph – Overview Second-hand Uniloy Milacron HSM10/D extrusion blow molding machine designed for producing up to 10 L HDPE containers. With a single-parison head and robust clamp, this EBM unit is ideal for industrial packaging and beverage production auxiliaries (e.g., water canisters, edible oils) and can be integrated within a used bottling line. Documentation and manuals are available. Reference number: SO126. Technical Specifications & Performance Data Main data Make/Model: Uniloy Milacron HSM10/D Year: 2000 Technology: Extrusion Blow Molding (EBM), single parison Material: HDPE Number of cavities: 1 Max container volume: 10 L Indicative output: up to about 300 bph on 10 L (application-dependent) Manuals: included Ref. no.: SO126 Extruder Screw diameter: 100 mm; L/D 24 HDPE screw speed: 0–70 rpm Plasticizing capacity (HDPE): approx. 300 kg/h Main extruder motor: 89 kW Heating zones: 6; barrel heating power: 31.4 kW Motor cooling power: 0.58 kW; barrel cooling power: 1 kW Parison head Type: PE 1/200, single parison Max die diameter: 200 mm Head heating power: 14.2 kW Parison thickness control: hydraulic (wall-thickness programming) Clamp & blow unit Clamp force: 200 kN Max mould size: 650 × 500 mm (H) Iiedpfx Ajyhbt Hog Usc Mould thickness: 2 × 150 mm Mould opening stroke: 300 mm Horizontal carriage stroke: 660 mm Blow pin stroke: 240 ± 5 mm Blow pin thrust at 50 bar: 320 kg Electrical Installed power: 156 kW (average consumption ~104 kW) Supply: 400 V, 50 Hz, 318 A, 3 + N Hydraulic system Reservoir capacity: 400 l Pump flow (1470 rpm): 123 l/min Max pressure (main circuit): 190 bar Main hydraulic motor: 37 kW; oil cooling motor: 1.5 kW Pneumatics Operating pressure (general): 6–8 bar; air use: 2000–2500 Nl/min Post-cooling pressure: 6–8 bar; air use: 1000–1500 Nl/min Cooling water Mould circuit: 8–12 °C; flow 15 m³/h Extruder & hydraulic oil: 10–24 °C; flow 4 m³/h Dimensions & weights Approx. machine size (L × W × H): 7600 × 7700 × 3900 mm Blow unit weight: 7600 kg; Extrusion group weight: 6400 kg Noise level at operator: < 85 dB(A) Advanced Automation & Control Systems Hydraulic wall-thickness programming for precise parison control, improving weight distribution and top-load performance on 10 L containers. Dedicated Uniloy command and control software (version code available in manuals) with operator interface for setpoint management and diagnostics. Integrated temperature control across six extruder zones and heated head for stable processing at up to 300 °C transformation temperature. Interlocked guarding and emergency stops for safe operation. Production Line Integration Capabilities This second-hand extrusion blow molder is integration-ready for downstream equipment typical of a used bottling line and industrial packaging systems: Conveyor...

Condition: good (used), Cartridge holder with shut-off valve Application: Butyl extruder Width: 450 mm Iijdpfey Tk Tnox Ag Ujc Diameter: 80 mm Weight: 2.6 kg Condition: good, second-hand

Year of construction: 2007, condition: excellent (used), LÜERS PP-PIPE BELLINGMACHINE 3 SOCKETS PER CYCLE With ring insert device Iiodpfxsy Agrfe Ag Uoc Type: MU110-3/2-48-06 Built in 2007 Application: PP HT pipes from 32 mm to 50 mm Application: PP HT pipes with diameters from 32 mm to 50 mm Min. diameter HD 32 mm Max. diameter HD 50 mm 3 sockets per cycle Tool: 1 set for HT DN 50 mm PP pipes The Bellingmachine is in very good working order Condition: very good The machine is my property. Hablamos español Nous parlons français We speak English

Condition: new, Year of construction: 2026, Availability upon request Very robust machine with high pressing force - also suitable for producing briquettes of saleable quality *depending on the material. The large pressing cylinder and the 70 mm briquette make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to errors + 25 years of experience, further development, and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Supplement for demonstration cooling unit + €4,980 net, (can also be retrofitted later) * Cools the pressing tongs (important for use after 4 hours) and the hydraulic oil * Cooling unit recommended for regular use of more than 4 hours at a time. Tariff number: 84793010, Briquette diameter: 70 mm, Front bushing: 125 mm, Max. briquette stroke: 100 mm, Optional briquette stroke: 80 mm, Capacity (depending on material): up to 150 kg/h* *depending on bulk density, *based on a bulk density of 200 kg per cubic meter. . Motor power: 9.2 kW, 400 volts / 50 Hz / 3-phase, Length: 2095 mm, Width: 1300 mm, * with large chamber 1600 mm Height: 1700 mm, Weight: 1250 kg, Oil capacity: 220 liters, Silo diameter: 1200 mm Silo capacity: approx. 1 cubic meter Pump: 75 liters Hydraulic pre-compressor Cooling option for pressing tongs: yes, with optional coolable pressing tongs Cooling option for hydraulic oil: yes Cooling of the pressing tongs and hydraulic oil with a cooling unit (optional accessory) Isdpfx Asd Nm Siog Usic Level monitoring option: yes Extruded briquette option; Yes (depending on material) Optional enlarged feed slide: Yes, with special accessory enlarged feed slide CE compliant Raw material requirements: - The moisture content (dry) must be between a minimum of 6% and a maximum of 18% - Maximum chip length: 20 mm - Installation temperature: Temperature-controlled room at a minimum of +5°C - The feed must be free of metals and mineral contaminants such as sand, stones, etc. This may result in damage to the press tools and/or increased wear.

Condition: like new (used), Rondo line for thin pastry, was set up to produce thin pastry to manufacture samosas but can be used for any fine pastry manufacture. Starts with elevated conveyor, 6 roll dough extruder 650mm wide, various 700mm wide conveyors with guillotines and dusters. Was set up to cut the pastry into 75 x 173mm 8 across, 90 x 213mm 7 across and 110 x 254mm 5 across. We would need to check first if all the sizes are here, not confirmed, just read from the order form. Lins is approx 22m long. All belts have perished, this has been in safe storage for many years as it could not be sold to competitors in the UK. Iiedpfsh Rwlfjx Ag Usc

Condition: good (used), Year of construction: 1998, functionality: fully functional, type of input current: three-phase, warranty duration: 6 months, Extrude Hone machine for surface finishing by abrasive paste flow. Iijdpfx Ajvkt Uwsg Ujc Paste cylinder diameter 250 mm It has a rotating table and paste cooler. It has an upper cylinder closure to prevent the paste from falling at the end of the cycle.

Condition: not inspected (used), functionality: unexamined, Year of construction: 2000, power: 315 kW (428.28 HP), overall weight: 3,000 kg, input voltage: 400 V, type of input current: three-phase, machine/vehicle number: Expander Typ OEE 23,2 315KW, Used expander/extruder, Iisdpfjvlwchsx Ag Uec versatile, can be used with both hydraulic counterpressure slide and dies (shaping e.g. for animal feed) Machine was purchased, unfortunately cannot be used because our power connection is not sufficient. Available: expander extruder with gear and drive, hydraulic slide (cone not plate), rotary knife and various dies, hydraulic unit with oil cooler. If required, the associated belt dryer is also available. Please send inquiries by email, thank you.

Year of construction: 1998, condition: like new (used), functionality: fully functional, SERAP CRUST FLOW P ID.NO. 2797 Serap Crust flow P tunnel which allows complete crust freezing of delicate and soft foods, etc. such as extruded biscuits, pasta, mousses, ready meals, ice cream etc. Also suitable for freezing meat products before slicing.Dimensions 320 x 120 cm H 165 cm Bandwidth 40 cm Iisdpfeumbyijx Ag Ujc

Year of construction: 2002, condition: excellent (used), KUAG PIPE-HAUL-OFF 160/3 CATERPILLAR Year of construction: 2002 Caterpillars: 3 with synchronous drive Diameter: Min 40mm Max 160mm Take-off speed: 0.2 - 15 m/min Condition: Very good operational Iisdpfxewki Dyj Ag Uoc Sachal Extrusionsmaschinen D-26345 Bockhorn-Grabstede Germany

Year of construction: 2002, condition: excellent (used), SAW KUAG CUT 110 for PP , PE or PVC PIPE With central pipe fixation Cutting and Chamfering without sawdust Cutting with a cutting roller/Circular knife or cutting steel and Carbide insert Min. Pipe diameter 20 mm, Max Pipe diameter 110 mm Year of construction: 2002 Condition: very good Isdju D Udwjpfx Ag Ujic Hablamos español Nous parlons français We speak English

Year of construction: 2004, condition: excellent (used), WEBER 3 layer PVC foam core pipe system with: 2 WEBER DS 9.25 DOUBLE SCREW EXTRUDER Year of manufacture 2004 WEBER DS 9.25 DOUBLE SCREW EXTRUDER Ijdot Rcn Nepfx Ag Uoic Year of manufacture 2004 Application PVC foam core pipe (three layer) Only the extruders are sold, without feed block The screws and cylinders of the two extruders are in very good condition The system is in very good working order The system is my property Sahal Extrusionsmaschinen D-26345 Bockhorn-Grabstede Germany

Condition: ready for operation (used), Year of construction: 2019, clamping force: 1,200 kN, total width: 2,200 mm, total height: 2,065 mm, overall weight: 8,450 kg, product length (max.): 5,259 mm, Hydraulic injection moulding machine manufactured in 2019. This Engel Victory 120 BMG features a clamping force of 120 t and a tie-bar-less design, ensuring efficient operation. It includes a high-speed injection unit and an advanced CC300 control system with a 21.5" full HD touchscreen. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 120 BMG machine we have for sale. Contact us for further details regarding this machine. • Tie-bar-less design • Machine hours: on-time 2,767 h; estimated operating time ~200 h (never used for regular series production) • Oil filling: 300 L • Power supply: 3x400 V + N + PE / 50 Hz • Control system: CC300, 21.5" full HD touchscreen • Hydraulic system: ecodrive SHV3-HSI servo-hydraulic • High-speed injection with accumulator • Oil cooler: standard • Injection unit size: hydraulic 200 • Platen size: standard Euromap • Mould height: increased +200 mm • Opening stroke: extended +200 mm Ijdpfx Agjy Ib Aie Usic • Ejector system: platen ejector • Core pull: hydraulic and pneumatic • Cooling water connections: machine and mould separate • Flow regulator: 0–10 l/min • e-flomo temperature control system: 4 and 6 circuits • Remote service: e-connect.24 (2 years) Additional equipment • Robot: ENGEL viper 12 RC300 • Max payload: 12 kg • Strokes: Z 1,160 mm; X 600 mm; Y 900 mm • C axis: pneumatic 0–90°, 30 Nm • Max system height: 3,600 mm • Min deposit height: 1,000 mm • Integrated conveyor belt • Belt width: 350 mm • Belt temperature resistance: up to 300 °C • Temperature control unit: HB-Therm Thermo-5 HB-160Z1 • Max temperature: 160 °C • Heating power: 8.0 kW • Pump: 0.50 kW, 30 L/min, 52 m • Cooling capacity: 30 kW @ 60 K • Vacuum pump: Pfeiffer DUO 35, 32 m³/h • Induction heating system: 50 kW, 50–200 kHz • Melting chamber: max ingot weight 100 gNo plastic extruder included!

Condition: good (used), Year of construction: 2014, XEIKON 3050 including front end system Year of Manufacture: 2014 _____ Product Description:  Bar code modules  Xeikon PMS-Large  Rewinder XRN 500 single shaft, incl. Tension control  Maintained: Gold maintenance contract  Operating hours: very low estimated max. 300h  Condition: As good as new Machine Specifications and Equipment:  Print Process: Electrophotographic with LED array, dry toner, rotary printing with variable print length Iijdpfx Aev Iqimsg Uoc  Color Configuration: 5/0 simplex (CMYK and White)  Color Control: Integrated densitometer  Toner: Xeikon QA-I  Resolution: 1200 x 3600 dpi with 4-bit LED spot  Print Width: 508 mm (20.0 inches)  Print Length: Variable, 0-55 m (0-180 ft)  Substrate Feeding: Roll-fed; suitable for paper, paperboard, self-adhesive or pressure-sensitive labels (paper, PP, PET, vinyl, co-extruded film), transfer substrates  Substrate Width: 250-516 mm (9.8-20.3 inches)  Substrate Weight: 40 to 350 gsm (27 lb text to 122 lb cover)  Substrate Thickness: 40 to 550 μm (1.6 mil to 21.65 mil)  Web Alignment: Active, based on infrared and ultrasonic sensors  Print Speed: 9.6 m/min (31.5 ft/min) _____ Accessories Included:  Manuals  Keys  Etc. _____ Technical and Optical Condition: • Technical: 9/10 (checked and in excellent running condition) • Optical: 9/10 (cleaned and ready for immediate end-user deployment) _____

Condition: good (used), 3DGENCE Type: Industry F420 Year of manufacture: 2021 Technical data: Build volume: 380 × 380 × 420 mm (60,648 cm³) External dimensions (W x D x H): 900 mm x 950 mm x 1950 mm Printing system: Dual extruder equipped with automatic cleaning system Filament diameter: 1.75 mm Printing materials: PLA, ABS, ASA, PA6/69, PC, ULTEM™ filament, PEEK Support material: Soluble support material ESM-10, HIPS Filament chamber: 4 slots for filament with automatic swapping system Print head temperature (max.): 500°C Iisdpfx Agot I Dm Io Uoc Heated bed temperature (max.): 180°C Build chamber temperature (max.): 180°C (active heating) Filament chamber temperature (max.): 50°C Condition: used Scope of delivery: (see pictures) Weight: 350 kg (Changes and errors in technical data and specifications excepted!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: ZE60 A- Econ EUP 600, Stock- No.: 2858 1 used, partly overhauled and tested compounding-pelletizing line, consisting of: Berstorff ( Krauss Maffei ) compounding extruder i Type ZE 60 A - 34 L/D twin-screw co-rotating extruder Extruder drive 160 kW AC Degassing with vacuum pump Laser separating head / melt filter Eprotec Melt x10 melt pump ECON EUP 600 underwater pelletizing system, complete with Start-up polymer diverter valve incl. hydraulic Water system pellet spin-dryer / centrifuge Control boards with Siemens Touch panel Iedpfxsy At N Rj Ag Ueic >> 12-month PLASTICO warranty OPTIONAL at extra cost: Material conveying Gravimetric loss-in-weight dosing-blending Granule classification Pellet filling station for Big Bags or Octabins Start-up in your factory by our Technicians We have more complete compounding extruders, pelletizing systems, loss-in-weight gravimetric blenders & more in Stock. Visit us in D 42329 Wuppertal or send us your inquiry, you´re welcome.

Condition: reconditioned (used), functionality: fully functional, Stock No.: 2858 1 used, partially overhauled and function-tested compounding and pelletizing line, consisting of: Extruder Berstorff (Krauss Maffei) Type ZE 60 A - 34 L/D twin-screw co-rotating Extruder drive 160 kW AC Degassing with vacuum pump Laser cutting head / melt filter Melt pump Eprotec Melt x10 ECON EUP 600 underwater pelletizer, complete with start-up valve water system granulate drying centrifuge >> 1 year PLASTICO warranty Iisdpfxjy At Ias Ag Uoc OPTIONAL for an additional charge: Material conveying system Gravimetric dosing units Granulate classification Pellet filling station for Big Bags or Octabins Additional compounding plants, pelletizing systems, gravimetric dosing units available from our Wuppertal facility. Visit us or send us your enquiry.

Year of construction: 1996, condition: reconditioned (used), No.: 2590k 1 used compounding-pelletizing line – output up to 1200 kg/h depending material, equipped with: 1x gravimetric ( loss-in-weight ) blending unit 5-Components SITECOM incl. control board 1x Extruder Twin-screw THEYSOHN Type TSK 90 Screws 2x Ø 90 mm – 36 LD co-rotating intermeshing Segmented screws-and Cylinder, Water / Medium cooled Extruder Motor 255 kW-DC / Screw speed up to 300 r.p.m. 1x Side feeding extruder TSD 75 twin-screw with 3 kW 3x venting ports 1x Melt-Filter Type K –HS- Y 176 mm incl. Hydraulic Pack 1x Melt-Pump with motor 22 kW 1x Strand die-head with holes 32 x Ø3,5 mm 1x Strand cooling bath 620 x 5000 mm 1x Strand pelletizer SG 300 with 11 kW ResoTec Monitor control Board Inspection visit / demonstration shortly possible - date on appointment Isdpfx Agsh Eyd Aj Uoic You´re welcome. More compounding pelletizing lines ex pour workshop available, find our most-recent stock-list online on our homepage.

Year of construction: 2015, condition: as good as new (ex-display), machine/vehicle number: 2245, stock-No.:2245 Iiedod Sg Hrjpfx Ag Uec 1 used Lab Extrusion-pelletizing Batch line, condition like new, equipped with: Extruder single-screw AlphaTec type AE-S 25-30 single-screw Ø 25 mm – 30 L/D Extruder motor 3 kW- AC, screw speed range up to 130 rpm frequency controlled cylinder air cooled, elec. heating 2 x 3 kW 1x venting athm. port 1x manual screen-pack-changer Ø 42 mm 1x strand-die-head 1x water bath 1.000 x 150 mm 1x strand-pelletizer, intake width 30 mm, motor 1,1 kW – AC control board with PID, melt pressure, speed by frequency converter Trial-run shortly possible, date by appointment Mire extruders ex our machine-stock Wuppertal Germany available.

Year of construction: 2003, condition: reconditioned (used), Stock - No. 2651 Iiedpfxeiyyf Io Ag Uec 1 used underwater pelletizing unit, partially overhauled in 2023 Throughput up to approx. 450 kg/h depending on the material, consisting of: Type BKG ( Nordson ) Start-up valve with hydraulic station Granulator type A300 including die-plate and cutter bar, drive 4.4 kW by-pass system TVE 1000 ED pellet-dryer drive 4 kW incl. Agglomerate catcher Tempered water system with Water box 200 liters, installed heating capacity 9 kW Water pump 2.2 kW with 15³/h heat exchanger Control unit - NEW Further UWP pelletizing units are available ex workshop in Wuppertal-Germany ( as Gala, BKG Nordson, Econ ) Available from the Wuppertal warehouse: complete compounding, pelletizing extrusion lines, with single-screw or twin-screw extruder.