Used Dimter 10 T for sale (85,740)

Condition: used, maximum load weight: 25,260 kg, overall weight: 38,000 kg, axle configuration: 2 axles, first registration: 03/2024, next inspection (TÜV): 04/2027, Equipment: ABS, Excerpt of Equipment: Load area: Low-bed with central beam in extendable design, length approx. 6,750 mm. 5 pairs of lashing rings that can be folded outwards (LC 5,000 daN). 1 pair of lashing rings that can be folded outwards (LC 10,000 daN). 1 pair of lashing rings lying horizontally at the rear in the loading area (LC 10,000 daN). The supply lines are protected in the central beam and adapt to the respective low-bed length. Gujdpezdxlksfx Aqief Gooseneck: Gooseneck, length approx. 3,900 mm. Gooseneck can be hydraulically raised/lowered and extended. Technical saddle load: 23,000 kg. Rear axle: Rear axle in short design with closed outer frame and diamond plate cover. Axle with excavator trough, which is closed in the rear half to accommodate the air tanks. 2 pairs of lashing rings that can be folded outwards (LC 5,000 daN). 1 pair of lashing rings that can be folded outwards (LC 10,000 daN). Axles: BPW axles, hydro-mechanically forced steering. Technical axle load: 12,000 kg each. Air suspension with raise and lower valve. Axle tool. Tires: Tires 245/70 R 17.5 3PMSF – Manufacturer of our choice. Load index (146/146F). Braking system: Braking system according to EU regulations with EBS-E (2S2M) without connection lines to the tractor unit. Steel construction: Steel construction made of high-strength fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa). S690QL/S700MC (yield strength 690 MPa). Paint: High-quality 2-component (2K) topcoat in a single color, RAL 3002 carmine red. Includes the following additional equipment: - 2-inch kingpin. - One galvanized steel front bulkhead, approx. 400 mm high. - One spare wheel holder in front of the bulkhead. - Yellow-red air couplings on the galvanized connection strip at the front. - 4 wheel chocks with holder (± 5 kg). - Steering from the front and rear by means of a cable remote control with push buttons, with single-axle control (without installation in the tractor unit). - Electro-hydraulic unit (± 45 kg). - Yellow reflector tape according to EU regulations on the side, on the extension and at the rear of the trailer. - 1 wooden block, approx. 500x250x200 mm. - Mounting rail for aluminum loading ramps at the rear of the vehicle. - One holder for a rotating beacon at the rear of the trailer. - One mud flap at the rear of the trailer. - European reflector signs (red-yellow) at the rear of the trailer. - On the gooseneck and at the rear panel on the left and right, one holder each for the warning signs, including socket. - Manual and instructions on a USB stick. - Speed sticker 80 km/h at the rear and on both sides. - Load manometer for determining the axle loads including load diagram. Includes special accessories: On the gooseneck, aluminum side boards and rear panel, pluggable, approx. 2,440 x 400 mm (L x H). The rear galvanized plug-in supports are removable (length of the superstructure approx. 2,560 mm) (± 46 kg). On the gooseneck, a separate air connection with an air gun. 2 work spotlights with switch on the trailer, mounted on the left and right on the gooseneck platform. 6 pairs of rung pockets for plug-in supports, approx. 100 x 50 mm in the outer frame of the loading area, 2 pairs in the outer frame of the axle (± 29 kg). Extensions galvanized, extendable by approx. 230 mm on each side (± 262 kg). Hydraulic connections from the gooseneck to the low-bed with multi-coupling instead of screw couplings. Central lubrication system with 2 pumps BEKAMAX (Pico) with normal grea

Condition: new, empty load weight: 3,780 kg, maximum load weight: 6,720 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 7,100 mm, loading space width: 2,480 mm, loading space height: 2,420 mm, loading space volume: 42 m³, suspension: air, tire size: 245/70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245/70 R 17,5, rear tire size: 245/70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, tail-lift, BPW axles, Dautel or BÄR tail lift, load capacity 1,500 kg, 4 cylinders, aluminum platform 1,800 mm long, 2 roll-off safety devices, with own batteries and charging cable, side wall thickness approx. 17 mm, , Front with portal doors for through-loading with short drive-over plate, , 2 rows of combination lashing rails, 7 pairs of lashing eyes embedded in the floor, , Rental price from 720 ¤ , , , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Gedpfeztfa Hox Aqiouf

Condition: used, empty load weight: 4,880 kg, maximum load weight: 5,620 kg, overall weight: 10,500 kg, axle configuration: 1 axle, first registration: 01/2019, loading space length: 7,450 mm, loading space width: 2,490 mm, loading space height: 3,100 mm, loading space volume: 57 m³, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, tail-lift, Dautel DL1500 S tail lift, load capacity 1,500 kg, with own batteries, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Gusdeztd U Njpfx Aqijf

Condition: new, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,100 mm, loading space width: 2,550 mm, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Load area length 8,100 mm, loading height approx. 900 mm, 20 x lashing eyes, each with a capacity of 10 t, 14 x stake pockets in the outer frame, 70 mm thick wooden floor, storage box with lid for lashing chains or tension straps, contour marking as per regulations, spring-loaded parking brake, incl. axle load indicators, vehicle hot-dip galvanized, also available with a 9 m load area length + widening in stock. Surcharge for: aluminum ramps = price: €2,200, warning panels with lighting = price: €800. Subject to printing errors, errors and changes. Sample images. More details at: ! Gjdpfx Aqsztd Szsisuf

Condition: new, empty load weight: 3,780 kg, maximum load weight: 6,720 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 7,100 mm, loading space width: 2,480 mm, loading space height: 2,420 mm, loading space volume: 42 m³, suspension: air, tire size: 245/70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245/70 R 17,5, rear tire size: 245/70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, tail-lift, BPW axles, Dautel or BÄR tail lift, load capacity 1,500 kg, 4 cylinders, aluminum platform 1,800 mm long, 2 roll-off safety devices, with own batteries and charging cable, side wall thickness approx. 17 mm, , Front with portal doors for through-loading with short drive-over plate, , 2 rows of combination lashing rails, 7 pairs of lashing eyes embedded in the floor, , Rental price from 720 ¤ , , , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Godpsztd Nmjfx Aqijuf

Condition: new, empty load weight: 3,780 kg, maximum load weight: 6,720 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 7,100 mm, loading space width: 2,480 mm, loading space height: 2,420 mm, loading space volume: 42 m³, suspension: air, tire size: 245/70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245/70 R 17,5, rear tire size: 245/70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, tail-lift, BPW axles, Dautel or BÄR tail lift, load capacity 1,500 kg, 4 cylinders, aluminum platform 1,800 mm long, 2 roll-off safety devices, with own batteries and charging cable, side wall thickness approx. 17 mm, , Front with portal doors for through-loading with short drive-over plate, , 2 rows of combination lashing rails, 7 pairs of lashing eyes embedded in the floor, , Rental price from 720 ¤ per month, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Guedpsztd Ntsfx Aqiof

Condition: like new (used), Year of construction: 2021, machine/vehicle number: see PDF files, FANUC CRX-10iA/L collaborative robot (cobot) – 10 kg / 1418 mm – 05/2021 – first owner, very low use – incl. vacuum gripper + CE base Gsdpfxozq Tzae Aqisuf Description: For sale: FANUC CRX-10iA/L collaborative robot (cobot), build date 05/2021, payload 10 kg and reach 1418 mm. From first owner and hardly used. The robot was purchased for a specific application/project, but the concept did not work as intended; therefore the installation was taken out of service and stored in 2021/2022. Including vacuum gripper beam with multiple suction cups as pictured, mounted on a CE-marked base built by Machinefabriek van de Weert (Helmond, NL). Robot specifications: * Make / model: FANUC CRX-10iA/L * Build date: 05/2021 * Payload: 10 kg * Reach: 1418 mm * Robot weight: 40 kg * Type / part no.: A05B-1702-B202 * Serial no.: R2150086C * Software: standard/basic configuration (no upgrades known) Base / installation (integrator): * Built by: Machinefabriek van de Weert – Helmond b.v. (CE) * Year of building: 2021 * Power supply: 230V / 50Hz * Compressed air: 6 bar * Base weight: approx. 150 kg Included: * FANUC CRX-10iA/L robot on base * Vacuum gripper / suction cup beam (as shown) * Cabling / pneumatics as installed * Control/electrics integrated in the system / complete as installed Condition: * Very low use, stored since 2021/2022 * Cosmetic dust/storage marks visible (see photos) * Inspection possible at our warehouse Location & delivery: * Location: Son (near Eindhoven), The Netherlands * Loading available Fixed quick-sale price: € 27,500.- excl. VAT, ex works Son (NL) Contact: Walther van Rooij – Machinehandel van Rooij BV (The Netherlands) Mobile/WhatsApp: E-mail:

Condition: used, mileage: 351,000 km, power: 151 kW (205.30 HP), first registration: 08/2013, fuel type: diesel, axle configuration: 4x2, wheelbase: 5,000 mm, fuel: diesel, color: red, driver cabin: day cab, gearing type: automatic, emission class: euro5, number of seats: 2, total length: 9,070 mm, total width: 2,540 mm, permissible axle load (axle 1): 4,480 kg, permissible axle load (axle 2): 8,480 kg, Year of construction: 2013, Equipment: ABS, electric window regulation, power assisted steering, tail-lift, = Additional options and accessories = - Disc brakes - Immobilizer - Tailgate = Remarks = DAF LF 45 - 210, 2013, Euro 5 EEV, 351,000 km Thermoking T1000 R, Dhollandia 1500 kg tail lift = More information = Technical information Engine capacity: 4.462 cc Max. front axle load: 4480 kg Max. rear axle load: 8480 kg Weights Empty weight: 7.860 kg Carrying capacity: 4.230 kg GVW: 11.990 kg Max. towing weight: 11.990 kg Functional Tail lift: 1500 kg Cooling engine: diesel and electric Maintenance APK (MOT): tested until 05/2027 Identification Registration number: 13-BBZ-8 = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U Gjdpfxezq Efws Aqieuf - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: used, empty load weight: 4,060 kg, maximum load weight: 6,440 kg, overall weight: 10,500 kg, axle configuration: 1 axle, first registration: 01/2018, loading space length: 7,450 mm, loading space width: 2,470 mm, loading space height: 3,100 mm, loading space volume: 57 m³, suspension: air, tire size: 235/75R17,5, color: other, gearing type: other, front tire size: 235/75R17,5, rear tire size: 235/75R17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, , -- Misprints, errors and omissions excepted, sample pictures --, More details under: !, More Details: ! Gusdpfx Aqezr Sbhsiof

Year of construction: 2000, condition: used, = Additional options and accessories = - Beacon(s) - Central locking - Electrically adjustable door mirrors - Work lamp(s) = More information = General information Mileage: 3.236 km Cab: single, day Technical information Power: 125 kW (170 HP) Type of fuel: Diesel Drive: motorised Transmission: Automatic GVW: 13.000 kg Condition General condition: very good Technical condition: very good Visual appearance: very good Financial information Price: On request = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Gujdpezp U Irjfx Aqijf Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Year of construction: 2015, operating hours: 100 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 4S 10kN 2268/000 1215 902, Dyna-Mess TP 10kN HF Cyclic Testing Machine / Endurance Vibration Test Stand – Top Condition, including temperature chamber (up to 120°C) & software Description: Manufacturer: DYNA-MESS Prüfsysteme GmbH Model: TP 10kN HF (Servopneumatic/Servoelectric High-Frequency Cyclic Testing Machine) Maximum test force: 10 kN (Static and dynamic range) Maximum machine travel: 12mm Date of purchase: December 2015 Condition: Almost new, very little use, immediately ready for operation (Plug & Play) Availability: Immediate For sale is a compact, high-precision cyclic testing machine from the premium manufacturer DYNA-MESS with a 10 kN nominal load and 12mm stroke. The system was acquired for dynamic endurance vibration tests and lifetime determination as part of a research project and has not been used since. It is in excellent, virtually new condition both visually and technically. The complete package includes a matching temperature chamber with controller up to 120°C. This enables standard-compliant, dynamic testing of components and materials under realistic thermal ambient conditions. System & Scope of Delivery: Load frame Dyna-Mess TP 10kN HF with highly accurate force and displacement sensors. Godszunz Nopfx Aqijuf Complete PC including installed and calibrated control software DYNA-TCC under Windows 7. The system operates completely autonomously and is immediately ready for operation. Temperature chamber with external control unit for tests up to 120°C. All associated documentation and connection cables. The machine is perfectly suited for laboratories, universities or quality assurance departments looking for a reliable system for fatigue and endurance tests without incurring the budget of new equipment. Inspection of the machine is possible by prior arrangement. As this is a commercial sale, the item is sold ex-works without warranty or guarantee. The sale is preferably to buyers who can collect the item themselves (dismantling and transport must be organized by the buyer). Price: €24,500 negotiable plus VAT.

Condition: used, mileage: 440,000 km, power: 320 kW (435.08 HP), first registration: 02/2010, fuel type: diesel, overall weight: 26,500 kg, axle configuration: 3 axles, next inspection (TÜV): 03/2026, color: green, gearing type: semi-automatic, emission class: euro5, Year of construction: 2010, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), MERCEDES-BENZ ACTROS 2644 6X4 THREE-SIDED DUMP TRUCK WITH HIAB CRANE, 10 M LONG? EPS GEARBOX? WITH CONTAINER? VEHICLE HISTORY ? GERMAN VEHICLE ? FROM FIRST OWNER ? VIDEO AVAILABLE UPON REQUEST ? IMMEDIATELY READY FOR USE VEHICLE EQUIPMENT ? BLUETEC 5 ? THREE-SIDED DUMP TRUCK ? 6X4 DRIVE ? SEMI-AUTOMATIC WITH EPS GEARBOX ? ENGINE BRAKE ? CRUISE CONTROL ? AIR CONDITIONING ? DIFFERENTIAL LOCK ? HILL START ASSIST ? MULTILIFT WITH ROLLER SYSTEM ? WINCH ? CONTAINER BODY ? REAR DOORS ? TRAILER COUPLING ? LEAF SPRING SUSPENSION CRANE ? HIAB SPACE 4000 ? CRANE TYPE: 122 BS-3 ? YEAR OF MANUFACTURE: 2009 ? OUTREACH: 10 M ? MAX. LIFTING CAPACITY: 4.6 TONS AT 2.6 M ? HYDRAULIC CONNECTIONS ? ADDITIONAL CONNECTIONS FOR GRABS ? SUITABLE FOR GRAB OPERATION ADDITIONAL INFORMATION ? WHEELBASE: 3.50 M ? TIRE SIZE: 385/65 R22.5 ? TIRES ON ALL 3 AXLES ARE THE SAME ? TIRES IN GOOD CONDITION ? VEHICLE AVAILABLE IMMEDIATELY ? PERMISSIBLE TOTAL WEIGHT: 26,000 KG ---- EXPORT / NOTE EXPORT SALES ONLY WITH DEPOSIT MIN. 500 € - 2,000 € Gujdpsy Tf Uaefx Aqijf EXPORT SALES ONLY WITH DEPOSIT MIN. 500 € - 2,000 € EXPORT REGISTRATION POSSIBLE IN 10 MINUTES (AUTHORIZED EXPORTER). VEHICLE RESERVATIONS SHOULD ONLY BE MADE IN WRITING. VERBAL AGREEMENTS ARE NOT BINDING. SUBJECT TO CHANGES, ERRORS, AND PRIOR SALE. LEGAL NOTICE THIS ADVERTISEMENT DOES NOT CONSTITUTE A BINDING OFFER IN THE SENSE OF SECTION 145 OF THE GERMAN CIVIL CODE (BGB). IT SERVES SOLELY TO INITIATE A CONTRACT. ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE. NO GUARANTEED CHARACTERISTICS. SALE IS EXCLUSIVELY SUBJECT TO OUR GENERAL TERMS AND CONDITIONS.

Condition: used, mileage: 440,000 km, power: 320 kW (435.08 HP), first registration: 02/2010, fuel type: diesel, overall weight: 26,500 kg, axle configuration: 3 axles, next inspection (TÜV): 03/2026, color: green, gearing type: semi-automatic, emission class: euro5, Year of construction: 2010, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), MERCEDES-BENZ ACTROS 2644 6X4 THREE-SIDED DUMP TRUCK WITH HIAB CRANE, 10 M LONG – EPS GEARBOX – WITH CONTAINER VEHICLE HISTORY * GERMAN VEHICLE * FROM FIRST OWNER * VIDEO AVAILABLE UPON REQUEST * IMMEDIATELY READY FOR USE VEHICLE EQUIPMENT * BLUETEC 5 * THREE-SIDED DUMP TRUCK * 6X4 DRIVE * SEMI-AUTOMATIC WITH EPS GEARBOX * ENGINE BRAKE * CRUISE CONTROL * AIR CONDITIONING * DIFFERENTIAL LOCK * HILL START ASSIST * MULTILIFT WITH ROLL-OFF FUNCTION * WINCH * CONTAINER BODY * PORTAL DOORS * TOW HITCH * LEAF-LEAF SUSPENSION CRANE * HIAB SPACE 4000 * CRANE TYPE: 122 BS-3 * YEAR OF MANUFACTURE: 2009 * OUTREACH: 10 M * MAX. LIFTING CAPACITY: 4.6 TONS AT 2.6 M * HYDRAULIC CONNECTIONS * ADDITIONAL CONNECTIONS FOR GRABS * SUITABLE FOR GRAB OPERATION ADDITIONAL INFORMATION * WHEELBASE: 3.50 M * TIRE SIZE: 385/65 R22.5 * TIRES ARE IDENTICAL ON ALL 3 AXLES * TIRES IN GOOD CONDITION * VEHICLE IMMEDIATELY AVAILABLE * PERMISSIBLE TOTAL WEIGHT: 26,000 KG – EXPORT / NOTE EXPORT SALES ONLY WITH DEPOSIT MIN. 500€ - 2,000€ EXPORT SALES ONLY WITH DEPOSIT MIN. 500€ - 2,000€ EXPORT REGISTRATION EXW POSSIBLE IN 10 MINUTES (APPROVED EXPORTER). VEHICLE RESERVATIONS SHOULD ONLY BE MADE IN WRITING. VERBAL AGREEMENTS ARE NON-BINDING. SUBJECT TO CHANGES, ERRORS, AND PRIOR SALE. LEGAL INFORMATION THIS ADVERTISEMENT DOES NOT CONSTITUTE A BINDING OFFER WITHIN THE MEANING OF §145 OF THE GERMAN CIVIL CODE (BGB). Gusdpfx Aoy Tgawsqijf IT SERVES SOLELY TO INITIATE A CONTRACT. ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE. NO GUARANTEED CHARACTERISTICS. SALE IS EXCLUSIVELY GOVERNED BY OUR GENERAL TERMS AND CONDITIONS.

Condition: used, Bernardo Type T 1000S swivel-spindle router for versatile routing work on solid timber, sheet materials and profiles. The machine is ideal for joinery and carpentry workshops requiring precise and high-performance milling solutions. Featuring a swivelling spindle, sliding carriage, angle stop and pneumatic hold-down device. Gsdpfx Aqjzryqkoiouf Technical data: - Milling spindle diameter: 30 mm - Speed ranges: 1400 / 3500 / 6000 / 800 rpm - Clamping length: 125 mm - Motor power: 4.0 kW

Condition: like new (used), Year of construction: 2022, functionality: fully functional, power: 5.5 kW (7.48 HP), overall weight: 347 kg, torque: 8,000 Nm, SEW Eurodrive KH107/T DRN132S4/BE11HR/ASE1/TF Manufacturer: SEW Eurodrive Type: KH107/T DRN132S4/BE11HR/ASE1/TF Serial Number: 01.8125801502.0001.22 Technical Data Speed [rpm] 1461 / 12 Total gear ratio [i] 121.46 Max. torque [Nm] 8,000 Output torque [Nm] 4370 SEW service factor 1.85 Mounting position IM M4B ISO designation CLP 220 Lubricant type Mineral oil Lubricant quantity [l] 31.50 Motor power [kW] 5.5 Gusdpszrbgmefx Aqijf Motor frequency [Hz] 50 Duty cycle S1-S10 S1 Motor voltage [V] / Switching method 230/400 Delta/Star Rated current [A] 18.20 / 10.50 cos phi 0.84 Thermal class [°C]/Protection class [IP] 155(F) / 54 International efficiency class IE3 Efficiency (100% Pn) [%] 89.6 Efficiency at 50/75/100% Pn [%] 90.6 / 90.6 / 89.6 Ambient temperature min. [°C] -20 Ambient temperature max. [°C] 40 Brake voltage [V] / Brake torque [Nm] 400 AC / 80 Brake rectifier TS BGE1.5 Nameplate: German Weight 347.00 kg SEW Eurodrive gear motors – various types immediately available Several high-quality gear motors from the manufacturer SEW-EURODRIVE are available for sale in various sizes and designs. These drives are ideal for use in machinery and plant engineering, in conveyor technology, and for numerous industrial applications. Available types 1. SEW KH107/T DRN132S4/BE11HR/ASE1/TF Motor speed: 1,461 / 12 rpm Total gear ratio: i = 121.46 Max. permissible torque (Ma max): 8,000 Nm Output torque: 4,370 Nm 2. SEW KH77 DRN90L4/BE2/DI/DFC/IV Incl. decentralized inverter: DFC20A-0055-503-A-T00-001/B Drive speed: 2,900 rpm Output speed: 33 – 1.6 rpm Total gear ratio: i = 88.97 Max. permissible torque (Ma max): 1,550 Nm Output torque: 645 Nm 3. SEW KH67/T DRN90L4/BE2/ASB1/Z Speed: 1,461 / 26 rpm Total gear ratio: i = 57.28 Max. permissible torque (Ma max): 820 Nm Output torque: 560 Nm 4. SEW K57 DRN80MK4/BE1/ASB1/Z Speed: 1,435 / 13 rpm Total gear ratio: i = 108.29 Max. permissible torque (Ma max): 600 Nm Output torque: 395 Nm 5. SEW KH37 DRN71M4/BE05/DI/DFC/IV Incl. decentralized inverter: DFC20A-0020-503-A-T00-001/B Drive speed: 2,900 rpm Output speed: 30 – 1.5 rpm Total gear ratio: i = 97.81 Max. permissible torque (Ma max): 200 Nm Output torque: 177 Nm General information Manufacturer: SEW-EURODRIVE Robust industrial quality Various power and torque ranges available Some with integrated decentralized frequency converter (DFC) Ideal as a replacement drive or for new projects If you are interested, we will gladly send you further information, photos or the nameplates of the individual drives. An inspection can also be arranged upon request.

Year of construction: 2018, condition: excellent (used), CTS T-70/600 Temperature Testing Chamber Manufacturer: CTS GmbH Model: T-70/600 Machine type: Temperature testing chamber Test chamber volume: approx. 600 liters Temperature range: -70 °C to +210 °C For sale is a used CTS T-70/600 temperature testing chamber from the year 2018. This air-cooled unit is suitable for professional temperature testing, environmental simulations, material testing, quality assurance, as well as development and stress tests. Gusdpfszmrmyex Aqijf The stainless steel test chamber has a volume of approx. 600 liters. Technical data: Manufacturer: CTS GmbH, Hechingen Model: T-70/600 Year of manufacture: 10/2018 Test chamber volume: approx. 600 liters Design: Standalone unit, air-cooled Temperature range: -70 °C to +210 °C Temperature stability over time: approx. ±0.3 K Max. heat compensation at +20 °C: approx. 4,000 W Heating rate: approx. 3.5 K/min Cooling rate: approx. 3.0 K/min CE marking available Electrical data: Rated voltage: 400 V / 3/N / 50 Hz Rated power: 9.1 kW Rated current: 14.6 A Protection class: IP22 Refrigeration system: Design: air-cooled Pre-cooling stage: R452A, 2.4 kg CO₂ equivalent: 5.14 t GWP: 2,140 Cooling stage: R23, 0.8 kg CO₂ equivalent: 11.25 t GWP: 14,800 Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Dimensions and weight: Test chamber internal (H × W × D): approx. 850 × 850 × 830 mm External dimensions (H × W × D): approx. 1,900 × 1,120 × 1,875 mm Weight: approx. 600 kg Sound pressure level: below 58 dB(A) Equipment: Capacitive multi-touch display Integrated program generator Fixed value and program operation Stainless steel test chamber, material 1.4301 Viewing window with interior lighting Temperature measurement via inlet and outlet air with Pt100 Software temperature limiter Ethernet, RS232 and USB interface Digital outputs for test item control Lateral cable entry Lockable door closure Movable design with rollers Test chamber and condensate drain Note: This unit is a temperature testing chamber. Humidity control is not available. Condition: Used Optical condition according to pictures Normal signs of wear and tear due to age and use Scope of delivery: CTS T-70/600 temperature testing chamber Accessories as shown in the pictures The table shown in the photos as well as other items not explicitly mentioned are not included in the sale. Shipping via freight forwarder is possible. Loading with a forklift is possible. Subject to changes, errors and prior sale.

Year of construction: 2018, condition: excellent (used), CTS T-70/600 Temperature Test Chamber Manufacturer: CTS GmbH Model: T-70/600 Year of manufacture: 10/2018 Machine type: Temperature test chamber Test chamber volume: approx. 600 liters Temperature range: -70 °C to +210 °C For sale is a used CTS T-70/600 temperature test chamber from 2018. This air-cooled, stand-alone unit is suitable for professional temperature testing, environmental simulations, material testing, quality assurance, and development and stress tests. The stainless steel test chamber has a volume of approximately 600 liters. Technical data: Manufacturer: CTS GmbH, Hechingen Model: T-70/600 Year of manufacture: 10/2018 Test chamber volume: approx. 600 liters Design: Stand-alone unit, air-cooled Temperature range: -70 °C to +210 °C Temporal temperature stability: approx. ±0.3 K Max. heat compensation at +20 °C: approx. 4,000 W Heating rate: approx. 4.03 K/min Cooling rate: approx. 3.17 K/min CE marking present Electrical data: Rated voltage: 400 V / 3/N / 50 Hz Rated power: 9.1 kW Rated current: 14.6 A Protection class: IP22 Refrigeration system: Design: air-cooled Pre-cooling stage: R452A, 2.4 kg CO₂ equivalent: 5.14 t GWP: 2,140 Cooling stage: R23, 0.8 kg CO₂ equivalent: 11.25 t GWP: 14,800 Operating pressure PS: 25 bar Test pressure PT: 27.5 bar Dimensions and weight: Internal test chamber (H × W × D): approx. 850 × 850 × 830 mm External dimensions (H × W × D): approx. 1,900 × 1,120 × 1,875 mm Weight: approx. 600 kg Sound pressure level: below 58 dB(A) Equipment: Capacitive multi-touch display Integrated program generator Fixed value and program operation Stainless steel test chamber, material 1.4301 Viewing window with interior lighting Temperature measurement via inlet and outlet air using Pt100 Software temperature limiter Ethernet, RS232 and USB interface Digital outputs for test item control Lateral cable entry Lockable door latch Mobile design with rollers Test chamber and condensate drain Workshop inspection: Functional test performed Electrical connection and phase sequence tested Heating and cooling function tested Speed test performed LAN communication and buffer battery tested Inspection seal applied Note: This unit is a temperature test chamber. Humidity control is not available. Condition: Used Optical condition as shown in the pictures Normal signs of wear and tear due to age and use Scope of delivery: Gjdpfx Aqszmqx Ioijuf CTS T-70/600 temperature test chamber Operating manual and technical documentation Test and workshop documents Accessories as shown in the pictures The table shown in the photos and any other items not explicitly mentioned are not part of the sale. Shipping via freight forwarder possible. Loading possible with a forklift. Subject to changes, errors and prior sale.

Year of construction: 2003, condition: ready for operation (used), Bar diameter range: 10mm-65mm, max. bar length: 3200mm, feed force: 550N, machine weight: approx. 2800kg, operating hours: approx. 60000h. Documentation available. An on-site inspection is possible. Gujdoy Ax Tuopfx Aqijf

Condition: ready for operation (used), Year of construction: 2007, A Haulotte mast lift is available. Working height: 10m, platform height: 8m, outreach: 3100mm, load capacity: 200kg, max. side force indoors/outdoors: 40kg/20kg, slewing range: 345°, max. inclination: 3°, basket dimensions X/Y: 680mm/930mm, lifting mast: 4950mm, max. wind speed: 45km/h. Machine dimensions X/Y/Z: 2700mm/1000mm/2000mm, weight: approx. 2800kg. An on-site inspection is possible. Guodpfsy Dupuex Aqiof

Year of construction: 2019, condition: ready for operation (used), A mixing vessel KG Bremen and two stirrers PRG and IKA are available. 1) Mixing vessel KG Bremen, year of manufacture: 2019, max. operating pressure: atmospheric, max. operating temperature: 80°C, volume: 1150L, max. double-jacket operating overpressure: 5bar, max. double-jacket operating temperature: 80°C, material: 1.4301. 2) Precision stirrer PRG R112M-6, year of manufacture: 2004, agitator length: 930mm, impeller diameter: 160mm. 3) Precision stirrer IKA RF 04-T-1085, year of manufacture: 1999, total length: 1100mm, impeller diameter 1/2: 160mm/200mm. An on-site inspection is possible. Gsdpfjxhntrjx Aqieuf

Year of construction: 1998, condition: ready for operation (used), An angular system for Weinig window and door production is available. Max. tool outside diameter: 320mm, max. tool flight circle: 232mm, slotted spindle length: 640mm, profiling and synchronized spindle length: 285mm-320mm, control: Siemens WS400. Including complete tooling and style window. Documentation available. Gedpfxetq U A Io Aqieuf

Year of construction: 1989, condition: ready for operation (used), Four Neff single-column presses are available. 1) Neff T 6.3, year of manufacture: 1989, output: 3kW. 2) Neff single-column press, operating hours: 9097h. 3) Neff EP 10 single-column press, year of manufacture: approx. 1950. 4) Neff single-column press. On-site inspection is possible. Guedpfx Aqevyirkjief

Condition: ready for operation (used), Year of construction: 2019, A cold-glue labeling machine Gernep, which was used in the food industry, is available. Nominal output: 10000bottles/h, running direction: LM, control range: 2000-12000bottles/h, gluing height 1/2: 330mm/230mm, bottle format height 1/2: 307mm/260mm, bottle format diameter 1/2: 90mm/68mm, bottle material: glass, bottle type: VDF/NRW, bottle volume: 1000ml/500ml, application: body label/neck label/back label, container condition: hot. Cold-glue format 1: label length range: 25mm-140mm, max. label height: 150mm, label height lower edge/upper edge: 15mm/320mm. Cold-glue format 2: label length range: 25mm-140mm, max. label height: 150mm, label height lower edge/upper edge: 15mm/220mm. Including two cold-glue units, dating, sensor label inspection, breakage detection, overload clutch, additional accumulation switch and center slide. Documentation available. An on-site inspection is possible. Gedpfx Aqey N Dfpeijuf

Condition: ready for operation (used), Year of construction: 2025, An integrated packaging system Soco consisting of a carton erector and a carton sealer is available. 1) Bottom flap folder Soco F-100P, min. carton width: 320mm, max. carton width: 520mm, max. carton length: 900mm, machine dimensions X/Y: approx. 750mm/1150mm. 2) Carton sealing machine Soco T-402 5-5-7, carton length range: 200mm-750mm, carton width range: 120mm-460mm, carton height range: 95mm-470mm, sealing capacity: 18/min, max. adhesive tape roll diameter: 385mm, weight: approx. 200kg. Including safety guarding, roller conveyor and transfer unit. The system is as new and has only been in operation since January 2026. Documentation available. An on-site inspection is possible. Guodpfjy Hk Tnex Aqisf

Condition: ready for operation (used), Max. bar length: 3200mm, remnant length: 500mm, feed speed: up to approx. 700mm/s, return speed: approx. 700mm/s, power consumption: approx. 1.5kW, with wiring diagram. A special feature is that the loader advances the bar to the desired length and does not require a machine stop. The remnant is also discharged from the machine into the loader remnant container. An on-site inspection is possible. Gedpfoy D Tn Aox Aqieuf