Used Dirinler Eccentric Press for sale (12,717)

Condition: used, Single-Column - Eccentric Press AMBOLD Type PEEV 25.2 Machine No. 11734 / Year of manufacture: 20 Press force: 25 tons Throat depth: 200 mm Table size: 520 x 400 mm Ram area: 155 x 155 mm Through hole in table: 185 x 155 mm Stroke adjustment: 4–80 mm Ram adjustment distance: 40 mm Max. installation height: 270 mm (maximum stroke at BDC, table at lowest position) Clamping shank bore: Ø 32 mm Table height adjustment: approx. 150 mm Ram strokes: 160 strokes/min Motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - Pneumatic clutch-brake combination ORTLINGHAUS - Press safety valve HERION - Press control PILZ - Electric foot switch and two-hand control - Height-adjustable press table via 2 threaded spindles - Automatic central lubrication VOGEL - UVV according to VBG 7n 5.1 for manual loading Blsdotx E N Topfx Ab Del - Free-standing control cabinet L x W x H = 600 x 310 x 1500 mm Required space L x W x H: 1450 x 1000 x 1850 mm Weight: 1.9 tons Very good condition

Condition: used, Single-column eccentric press WEINGARTEN type ARP 100 Machine no. No. 122481 Year of construction 1984 Pressure capacity 100 ton. throat 400 mm Table size 920 x 660 mm ram surface 700 x 450 mm Rear upright width 735 mm Stroke adjustment 20 - 160 mm Plunger adjustment 80 mm Installation height with 160 mm stroke max. 355 mm (without intermediate table top) Installation height with 20 mm stroke max. 425 mm (without intermediate table plate) Stroke rate 60 strokes/min. Table surface intermediate table top 920 x 610 mm Thickness of intermediate table top 90 mm Hole in intermediate table top Ø 210 / 180 mm Through-hole in machine table Ø 210 / 180 mm Table height above floor 800 mm (without intermediate table top) T-slot width in table and ram 22 mm Bsdpju Rwa Iefx Ab Dell Clamping pin bore 50 mm Motor power 11 kW Mains connection 400 Volt, 50 Hz - Hydraulic overload protection in ram - ORTLINGHAUS pneumatic clutch/brake combination - Electromotive ram adjustment with counter - Clamping pin bore with clamping piece - Front crankshaft support bearing - Gear reduction gears in closed oil bath gearbox - Two pneumatic tappet compensation cylinders - WOERNER automatic central grease lubrication - Lift release via electric foot switch or two-hand control panel - Electrical control cabinet permanently attached to the machine - Operating instructions and circuit diagram - UVV for manual insertion work Space requirement L x W x H 2200 x 1600 x 3250 mm Weight 8.3 tons Good condition

Condition: used, Single-column – Eccentric press PELS - RICHTER, type PEKR 125 Machine no. 20684, year of manufacture 1967 Pressing force: 125 tons Reach: 430 mm Table size: 1100 x 750 mm Ram surface: 890 x 650 mm Table opening: Ø 400 mm Stroke adjustment: 6 to 115 mm Ram adjustment: 100 mm Installation height for maximum stroke at the top: max. 450 mm Arbor hole: Ø 50 mm Stroke rate: 60 strokes/min Table height above floor: 900 mm Motor power: 7.5 kW Power connection: 380 volts, 50 Hz - Overload protection by shear plate in the ram - Compressed air coupling-brake combination DESCH - Ram weight balancing cylinder - Manual ram adjustment - Two-hand operation - Cam indexing mechanism - Central grease lubrication system Vögele - Stroke counter Blsdpfxjfim The Ab Dsl Space requirement L x W x H: 2300 x 1450 x 3030 mm Weight: approx. 10 tons Good condition

Condition: used, Year of construction: 1979, pressure:64 t throat:315 mm Bodpscxxmfofx Ab Dsll stroke:8-100 mm no. of strokes:140 Hub/min table surface area:820 x 630 mm table height over floor:800 mm ram stroke - adjustable min/max:8-100 mm ram - range of adjustment:63 mm total power requirement:7,5 kW weight of the machine ca.:4,8 t dimensions of the machine ca.:1,45 x 1,70 x 3,10 m

Condition: used, Year of construction: 1970, machine/vehicle number: 120895, pressure:63 t throat:250 mm stroke:8 - 100 mm no. of strokes:120 Hub/min table::715 x 500 mm dayligth:330 mm ram adjustment:63 mm clamping plate:700 x 480 mm Bljdpsfx Hv Hsfx Ab Dol hole in the table:240 mm Hole in clamping plate:110 mm dimension of ram:450 x 280 mm weight of the machine ca.:5,5 t dimensions of the machine ca.:1,2 x 1,7 x 2,7 m hydraulic tilting single column eccentric press, tilting in 4 steps, opening to rear (325 x 500mm) and below (360x160mm) with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot-trip operation possible, operating-mode selector for adjustment of continuous or single stroke, emergency cut-off, piece counter, various accessories

Condition: used, Year of construction: 1953, machine/vehicle number: 66/53, pressure:36 t throat:280 mm stroke:6 - 82 mm ram adjustment:51 - 13 mm no. of strokes:6-82 Hub/min table surface area:530 x 480 mm Hole in clamping plate:Ø 140 mm clamping plate thickness:70 mm ram surface:200 x 200 mm clamping plate:530 x 450 mm dimensions of the machine ca.:1,0 x 1,65 x 1,80 m Bjdpfx Aecxxwcob Doll flywheel machine with DITTMER type PSK 103/B built in 1978, additional clamping plate 530 x 450 mm (thickness 70 mm), manual central lubrication, height-adjustable table (+/- 180 mm)

Condition: used, pressure:70 t throat:250 mm stroke:10 - 120 mm table-size:750 x 500 mm dayligth:350 mm ram adjustment:350 x 200 mm no. of strokes:50 Hub/min daylight:310 x 370 mm Blodpfocxxttox Ab Dsl total power requirement:5 kW weight of the machine ca.:3,5 t dimensions of the machine ca.:1,3 x 1,4 x 2,5 m tilting eccentric press, tie-rod design with UVV movable protective screen, pneumatic clutch, quadruple led tappet, separate electric cabinet, central lubrication, electric two-hand operation, emergency cut-off

Condition: used, Year of construction: 1970, pressure:63 t throat:250 mm stroke:8-100 mm table depth:710 mm table width:500 mm Bsdpfxscxxx Hj Ab Doll ram head dimension:450x280 mm ram adjustment:63 mm no. of strokes:140 Hub/min total power requirement:7 kW weight of the machine ca.:3,5 t

Condition: used, Year of construction: 1967, pressure:80 t throat:280 mm stroke:20-120 mm Bledpocxxrhefx Ab Djl table width:710 mm table depth:560 mm ram head dimension:560x355 mm ram adjustment:72 mm no. of strokes:125 Hub/min total power requirement:9,5 kW weight of the machine ca.:4,4 t

Condition: used, Year of construction: 1987, machine/vehicle number: 5347, pressure:10 T throat:180 mm stroke:8-60 mm no. of strokes:180 Hub/min table surface area:400 x 340 mm table height over floor:935 mm hole in the table:80 mm ram - range of adjustment:40 mm ram surface:180 x 110 mm total power requirement:1,1 kW weight of the machine ca.:0,6 t dimensions of the machine ca.:1,2 x 1,5 x 2,0 m Blsdpfjcxxygsx Ab Del

Condition: used, Year of construction: 1997, pressure:40 t throat:280 mm Blsdpfx Aocxxmgeb Dol stroke of slide:8-120 mm no. of strokes:120 Hub/min throat:280 mm daylight:350 mm dayligth:270 mm table-size:710 x 565 mm ram surface:500 x 280 mm total power requirement:2,2 kW weight of the machine ca.:3,2 t

Year of construction: 2013, condition: excellent (used), 1. SCOPE OF SUPPLY • EBU H 12 FT eccentric press • Siegfried SPC control unit 2. DOCUMENTATION • Complete operating documentation available 3. TECHNICAL DATA Year of manufacture: 2013 Type: Eccentric press Rated force: 120 kN Max. tool installation height: 170 mm Bljdpfx Asfrzlmsb Dsl Max. weight of upper tool part: 25 kg Stroke adjustment range: 30 mm Ram height adjustment: 40 mm Stroke rates: 40-200 1/min Pneumatic operating pressure: 5.5/10 min/max bar Electrical connection: 400 VAC, 50 Hz Weight: 1200 kg

Year of construction: 1987, condition: used, pressure 63 t throat 300 mm stroke 8-140 mm no. of strokes 70 Hub/min ram - range of adjustment 100 mm table surface area 750x620 mm Bsdpfx Abjp Sycwj Doll ram surface 500x340 mm hole in the table Ø 180 mm table height 850 mm tool hole in ram Ø 50 mm weight of the machine ca. 7,5 t dimensions of the machine ca. BxTxH 2100x1500x3300 mm

Year of construction: 1975, condition: used, pressure 125 t throat 400 mm stroke 6-125 mm ram - range of adjustment 100 mm dayligth 400 mm table surface area 1100x750 mm Bsdpslp U Dhofx Ab Doll no. of strokes 60 Hub/min ram surface 800x550 mm hole in the table Ø 150 mm total power requirement 14 kW weight of the machine ca. 9,0 t dimensions of the machine ca. BxTxH 1500x2200x3500 mm

Year of construction: 1958, condition: used, pressure 160 t throat 340 mm stroke 20-120 mm no. of strokes 45 Hub/min ram - range of adjustment 100 mm table surface area 800x620 mm ram surface 500x400 mm hole in the table Ø 360 mm tool hole in ram Ø 50 mm weight of the machine ca. 12 t dimensions of the machine ca. 2200x2000x3600 mm Bsdslp U Ebepfx Ab Dsll

Year of construction: 1967, condition: used, pressure 63 t throat 280 mm stroke 8-100 mm Blsdpslp U Emsfx Ab Djl no. of strokes 56/84 Hub/min ram - range of adjustment 63 mm table surface area 620x500 mm ram surface 310x260 mm hole in the table Ø 250 mm table height 850 mm tool hole in ram Ø 40 mm weight of the machine ca. 4 t dimensions of the machine ca. 1200x1900x2800 mm

Condition: new, Year of construction: 1984, pressure 80 t throat 280 mm stroke 10-100 mm Bledjwa Umlepfx Ab Del no. of strokes 52/80 Hub/min ram - range of adjustment 60 mm table surface area 850x550mm mm ram surface 420x220 mm hole in the table 300x200 mm table height 780 mm tool hole in ram Ø 45 mm weight of the machine ca. 4,5 t dimensions of the machine ca. 2000x2000x2700mm m

Year of construction: 1978, condition: used, pressure 80 t throat 280 mm stroke 8-112 mm no. of strokes 55 / 82 Hub/min ram - range of adjustment 80 mm table surface area 800x570 mm Blsdslp U Ddopfx Ab Del ram surface 560x355 mm hole in the table Ø 280 mm table height 800 mm tool hole in ram Ø 50 mm total power requirement 7,5 kW weight of the machine ca. 6 t dimensions of the machine ca. BxTxH 1600x2200x3000 mm

Year of construction: 1966, condition: used, pressure 100 t throat 410 mm stroke 8-112 mm no. of strokes doubel-strokes per min. 55 / 82 Bedpfx Aelp U D Eeb Dsll ram - range of adjustment 80 mm table surface area 950 x 700 mm ram surface 700x450 mm hole in the table Ø 280 mm table height 850 mm tool hole in ram Ø 50 mm weight of the machine ca. 7,0 t dimensions of the machine ca. 1400x2200x2800 mm

Year of construction: 1970, condition: used, pressure 63 t throat 440 mm stroke 8-100 mm no. of strokes 65 Hub/min Bedpfxslp U Eqj Ab Dsll ram - range of adjustment 63 mm table surface area 720x750 mm ram surface 440x280 mm hole in the table Ø 240 mm table height 830 mm tool hole in ram Ø 40 mm weight of the machine ca. ca. 5,0 t

Year of construction: 1959, condition: used, pressure 65 t throat 370 mm stroke 29-151 mm no. of strokes 50 Hub/min ram - range of adjustment 80 mm table surface area 1300x700 mm ram surface 1000x600 mm hole in the table ¦ 110 mm Bedslp U E Hepfx Ab Doll table height 800 mm tool hole in ram Ø 40 mm weight of the machine ca. 6 t dimensions of the machine ca. BxTxH 1700x2000x2800 mm

Year of construction: 1962, condition: used, pressure 10 t throat 170 mm stroke 6-60 mm no. of strokes 160 Hub/min ram - range of adjustment 40 mm Bedpfslp U Nbjx Ab Doll table surface area 420x320 mm ram surface 180x140 mm hole in the table Ø 120 mm table height 850 mm tool hole in ram Ø 32 mm weight of the machine ca. 1 t dimensions of the machine ca. 1200x1200x1900 mm

Year of construction: 1987, condition: used, pressure 40 t throat 270 mm stroke 4-100 mm no. of strokes 130 Hub/min ram - range of adjustment 80 mm table surface area 670x540 mm ram surface 460x300 mm hole in the table Ø 100 mm table height 850 mm tool hole in ram Ø 50 mm Bledpsp Syctefx Ab Dsl weight of the machine ca. 6 t dimensions of the machine ca. BxTxH 1500x2300x3300 mm

Year of construction: 2023, condition: new, pressure 40 t throat 195 mm stroke 8-78 mm no. of strokes 76-190 Hub/min ram - range of adjustment 60 mm table surface area 650x380 mm table height 840 mm hole in the table Ø 110 mm Bledpfsp Udupex Ab Dol ram surface 250x350 mm tool hole in ram Ø 40 mm total power requirement 3 kW weight of the machine ca. 2,2 t dimensions of the machine ca. BxTxH 1450x1220x2110 mm

Condition: new, Year of construction: 2024, pressure 30 t Blsdpfsvfhpxox Ab Del throat 180 mm stroke 8-76 mm no. of strokes 80-200 Hub/min ram - range of adjustment 60 mm table surface area 360x580 mm table height 840 mm hole in the table Ø 110 mm ram surface 250x350 mm tool hole in ram Ø 40 mm total power requirement 3 kW weight of the machine ca. 1,8 t dimensions of the machine ca. BxTxH 1350x1200x2100 mm