Used Diskus Double Face Grinding Machine for sale (73,507)

Condition: refurbished (used), machine/vehicle number: 3439.39, Universal cylindrical grinding machine for external and internal cylindrical grinding. • Distance between centers: 650 mm • Height between centers: 175 mm • Completely overhauled (refurbished) – The machine was completely disassembled and rebuilt component by component. Guide rails were reconditioned, bearings were replaced, new control cabinet and new electrical installation, complete new paint job, and geometrical readjustment for maximum precision. • Equipped with a digital measuring system (Fagor). • Machine condition comparable to a new machine, ready for immediate use. • Extensive accessories included in the scope of delivery, as shown in the photos. Gujdpfjxxy A Tjx An Isg • Demonstration under power and test run possible at any time. Availability: Available for immediate delivery!

Condition: excellent (used), KELLENBERGER PRECISION UNIVERSAL CYLINDRICAL GRINDING MACHINE TYPE: 600 U YEAR OF MANUFACTURE: 2003 PARTIAL OVERHAUL: 2026 (Technical data see attached documents) Center height: 175 mm (without height adjustment) Grinding length: 600 mm Godszhma Dspfx An Ieug Equipment: - Standard accessories - Internal grinding device for D: 80 mm max. incl. coolant supply through the workpiece spindle - Grinding wheel equipment left for D: 400 x 50 x 127 mm (standard) - Grinding wheel equipment right for D: 300 x 40 x 127 - Grinding wheel flange for wheels D: 400 x 50 x 127 mm (left) and D: 300 x 40 x 127 (right), balancing weights outside (3 pieces left, 2 pieces right) - Variable spindle drive with Danfoss frequency converter - Balancing device for dynamic balancing, type ELASO MANOBALANCE 750/EB 2000 - RENAUD internal grinding spindle type REN 828 (grease-lubricated with compressed air lock) - Various internal grinding mandrels for REN 828 – 1235, 1645, 2060, 2575 (4 pieces) - Various chucks HJNZ 28 for HJN 828 with 2 collets D: 3 mm and D: 6 mm - Tailstock standard MK 5 with adapter flange DIN 55027 size 5” Bore D: 38.2 mm (standard) - Sine bar on the tailstock - Tailstock with manual retraction for quill travel - Micrometer adjustment on the tailstock - Pneumatic relief of the tailstock - FORKARDT planetary three-jaw chuck D: 200 mm - REISHAUER wedge-bar three-jaw chuck D: 160 mm - Permanent magnet chuck D: 200 mm - Collet chuck for Schaublin B32 - Set of 59 collets Schaublin B32, D: 1.0 – 30.0 mm, graduation 0.5 mm - Set of 8 workpiece supports incl. holder - Three-jaw steady rest, 175 mm, foldable, D: 3-120 mm - Swiveling dressing tool for dressing during external, surface or internal grinding - Side and angled dressing tool for side and angled dressing of the grinding wheels - Dial indicator stop for table swiveling with dial indicator 1/100 mm - Dial indicator stop for table longitudinal movement with dial indicator 1/100 mm - Dressing stop for internal grinding - HEIDENHAIN Digital length measuring system for the X and Z axes - STREULI paper band filter SPB 3, 90 l/min at 0.26 bar, tank volume 240 l - WALDMANN machine lamp - Set of vibration-damping pads - Three-color paint finish (light gray RAL 7035/blue RAL 5012/dark gray RAL 7016) - New acceptance test report according to KELLENBERGER standard - CE conformity - Documentation Condition: very good, machine geometrically and mechanically overhauled (see geometry report)

Condition: excellent (used), Year of construction: 1989, Jung JF 520 Jung JF 520 surface grinding machine, manufactured in 1989 / 2019, mechanically overhauled, very good original condition. The machine comes from the technical department of a renowned German die-casting company. Technical data: Year of manufacture 1989 / 2019 Technical data Clamping area (L x W in mm) 600 x 200 Oversize grinding area (L x W in mm) 600 x 250 Magnet size max. mm 500 x 200 Grinding wheel dimensions max. mm 225 (250) x 25 x 51 Distance table/spindle center mm Max. 400 Table longitudinal feed, oscillating m/min 1 – 20 Creep feed mm/min 0 – 500 Grinding spindle drive, speed rpm 800 – 4200 Power kW (with creep feed) 1.6 – 2.2 Godpjz Agz Rjfx An Ioug Machine weight approx.: 2.0 t Accessories and equipment: Magnet Coolant system Machine feet Grinding wheel About the machine: We offer a Jung JF 520 surface grinding machine, manufactured in 1989 / 2019, in very good condition. The machine is, of course, fully functional and has approximately 250 operating hours since its overhaul. All slides run very smoothly and evenly. Even at high speeds, the Jung runs very quietly. This newer generation of surface grinding machines is very user-friendly, and surfaces with a low Ra value can be produced. Take advantage of the opportunity to inspect this machine on site under power and see for yourself the condition of the machine. Video: Jung JF 520 You can find more surface grinding machines from well-known manufacturers on our website.

Condition: excellent (used), functionality: fully functional, Facing & Centering Machine Model: FZWD 160 Year: 1978 Location: Rostock Country: Germany Manufacturer: WMW Saalfeld Control system: Conventional Machine weight: 4 t Total power requirement: 19 kW Dimensions (L x W x H): 3.1 x 2.59 x 1.7 m Workpiece diameter: 20 - 160 mm Workpiece length: 140 - 1,000 mm Workpiece weight: 125 kg Cutter mounting: SK 50 Rapid traverse: 6,000 mm/min Gusdpfxoytitrs An Iog Spindle speeds (cutter head): 56 ... 280 rpm Feed rates, stepless: 15 ... 800 mm/min Max. milling slide stroke: 230 mm Max. cutting depth: 6 mm For center drills: 4 ... 20 mm Feed rates, stepless: 15 ... 375 mm/min Max. feed travel: 60 mm

Condition: good (used), PROTH PSGS-3060AH surface grinder Grinding surface: 300 × 600 mm Cross travel × longitudinal travel: 340 × 700 mm Spindle center height above the table: approx. 500 mm Table longitudinal feed rate: 1 to 25 m/min Standard grinding wheel: Ø355 × 25 × Ø127 mm Spindle speed: 1,500 / 1,800 rpm at 50/60 Hz Spindle motor: 2.2 kW / 3 HP Net weight: approx. 1,650 kg Dimensions of packaged machine: approx. 2.28 × 1.74 × 2.06 m Gjdpfezxg Uvsx An Isug

Condition: used, *VILAR LASSEUR VL 315 GRINDER - 1992 - Carbide Tool Sharpening* French VILAR Chatellerault grinder, Type *VL 315* - No. *315.256* - Date: *06/29/92* *Complete equipment:* - Cross table with carriage + swivel table for workpieces - Universal, inclinable tool holder - Long arm for lathe tool holder / carriage tool - Diamond grinding wheel, housing, coolant system - Remote control box, emergency stop button - Articulated lighting lamp - Original green Vilar sheet metal base Gujdpszxt Hfofx An Ijg 400V - In working condition, from a precision engineering workshop On a pallet - Approx. 350 kg - Easy to transport Video available upon request.

Condition: used, Year of construction: 2025, width of the strips 150 mm band length 2000 mm band speed 1400 / 2800 U/min tube diameter 40 - 140 mm voltage 380 V total power requirement 3.0 kW weight of the machine ca. 360 kg. Exhibition machine - like NEW not yet in use (!!) New price approx. 6.500 euros Special price on request - Machine video - identical machine - ?v=LXP09NFTnlw&t=1s The FALKEN PN 38/140 is a multifunctional grinding machine for grinding pipe and profile ends Equipment: - robust electro-motor pipe profile grinding machine - enables notches up to an angle of 50° - large-dimensioned surface grinding surface with protective cover - 2x belt speeds - control panel, front left - including emergency stop button Godpfx Aow U U U Dsn Isug - grinding belt can be replaced quickly and easily - vice movement to the right - left, forwards & backwards possible - side grinding dust collection container - horizontal & vertical grinding alignment possible - 1x set of grinding rollers included in delivery (Ø 76-90-114 mm) * other dimensions optionally available for an additional charge

Condition: used, Year of construction: 2025, tube diameter 16.0 - 90.0 mm width of the strips 100 mm band length 1250 mm grinding band dimension 100 x 1250 mm total power requirement 2.2 kW weight of the machine ca. 180 kg. range L-W-H 1200 x 600 x 1150 mm Exhibition machine - like NEW not yet in use (!!) New price approx. 4.500 euros Special price on request The PN 17/90 is a grinding machine for grinding pipe and profile ends on the front. Equipment: - electro-motor grinding machine for pipe and profile ends - 10x grinding rollers included in delivery * incl. storage area - rear of the machine - simple manual clamping/opening of the material - lateral adjustment of the material clamping system - grinding up to 50° degrees possible - machine base - collecting tray for easy emptying of grinding dust - EMERGENCY OFF button at the front Gujdpoxab N Dofx An Isg - front privacy screen made of plexiglass - side transport bags for easy transport

Condition: new, Year of construction: 2026, functionality: fully functional, New double miter band saw machine, equipped with a frequency converter. Suitable for cutting various materials. Godpfszu Db Ejx An Ioug

Condition: excellent (used), Year of construction: 2019, operating hours: 29,081 h, functionality: fully functional, CNC control HEIDENHAIN TNC 640, 15" Main computer MC Controller unit CC Keyboard TE 15" TFT color flat screen with softkeys RAM: 4 GB Hard disk: 32 GB, of which at least 21 GB program memory Input resolution / display increment linear axes: up to 0.1 µm Input resolution / display increment rotary axes: up to 0.0001° Input range: max. 99,999.9999 mm or 99,999.9999° Circular interpolation in 3 axes with tilted machining plane Helical interpolation Linear interpolation in 5 axes Block processing time: 0.5 ms Ethernet: 2 x 1000BaseT USB: 1 x front USB 2.0, 4 x rear USB 3.0 Handwheel HEIDENHAIN HR510 Axis selection via buttons / softkeys Buttons for continuous axis movement Emergency stop button Magnetic attachment Enable buttons / dead man's buttons according to CE Travel ranges Gusdpoyrndmofx An Isg X-axis / longitudinal axis: 4,000 mm Y-axis / transverse axis: 2,500 mm Z-axis / vertical axis: 1,300 mm Feed / connection / pneumatics Max. feed rate interpolating axes: 40 m/min Installed power: 60 kVA Max. power consumption: 150 A Air requirement pneumatics: 400 Nl/min Working pressure pneumatics: 6 bar Machine table / floor plate Machine table recessed, with leveling units Table size: 2,500 x 4,000 mm Table height: 300 mm Load capacity: 10 t/m² T-slot width: 28 H12 mm T-slot spacing: 250 mm Milling head / universal milling head Universal milling head with continuous movement in 2 axes 5-axis machining Direct drives for rotary axes Rotary axes as interpolated CNC axes Automatic tool clamping Undercut machining up to 10° possible Integrated cooling of the torque motors and spindle bearings C-axis swivel range: +/- 270° A-axis swivel range: +/- 185° Max. speed A/C axes: 30 rpm Working torque A/C axes: 450 Nm Clamping torque axes: 1,400 Nm Positioning accuracy A/C axes: 8 arcsec Positioning repeatability A/C axes: 4 arcsec Main spindle Spindle power S1 / S6: 22 / 33 kW Spindle torque S1 / S6: 84 / 128 Nm Max. spindle speed: 18,000 rpm Constant power: 2,500 - 18,000 rpm Constant torque: 10 - 2,500 rpm Tool holder: HSK-A63 DIN 69893 Rigid tapping for electric spindle Software / calibration Dynamic RTCP software AUTOCAL software for automatic calibration 3D Form Inspect M&H software Software for measuring 3D shapes, tools, molds and dies Measurement program creation directly via coordinate points / surface points Vibration / collision monitoring Sensor for detecting vibrations Detection of collisions and excessive vibrations on 3 axes Reaction time approx. 1 ms Electronic interface for functional testing Tool changer Tool changer with arm for tool changes Overlapped-wheel design Full enclosure for operator safety Tool positions: 80 Max. tool diameter: 75 mm Max. tool diameter with free adjacent positions: 125 mm Max. tool weight: 10 kg Max. tool length: 600 mm for 40 tools Max. tool length: 250 mm for 40 tools Tool type: HSK-A63 DIN 69893

Condition: used, Year of construction: 2004, grinding diameter 250 mm grinding length 650 mm centre height 125 mm Maschine wird mit Wartung und neuer Geometrie verkauft Betriebsstunden bisher 12260 Reitstock mit Feinverstellung Schleifspindelstock schwenkbar mit 5° Hirtverzahnung Papierbandfilter Guedpfoywntyjx An Iog Marposs Messeinrichtung Innenschleifeinrichtung

Condition: repair required (used), The TSCHUDIN HTG400 is available as a source of spare parts. Mechanically, the machine is in good condition. Electrically, the machine needs to be inspected and repaired. The drive motors are in good condition. The machine is being offered as a source of spare parts. Gujdpfjyt E Irex An Ieg

Condition: used, Jung F 50 Surface Grinding Machine Condition: Used Technical Data Grinding Length: 500 mm Grinding Width: 200 mm Grinding Height to Spindle Center: 285 mm Table Size: 700 x 200 mm Spindle Speed: approx. 3000 rpm Grinding Wheel: 225 x 20 x 51 mm Feed: manual via handwheel Rapid Traverse Wheel Dressing Device Dimensions (L / W / H): approx. 1850 mm / 1300 mm / 1750 mm Weight: approx. 1400 kg Guedpeyuy Euefx An Iog

Condition: used, Technical details: Gsdsrkr U Ejpfx An Ioug grinding length: 600 mm centre height: 180 mm swing dia.: 360 mm workpiece weight: 80 kg max. dia. of grinding wheel: 500 mm grinding wheel width: 80 mm grinding wheel hole diameter: 203,2 mm peripheral speed: 45 m/sec There is also a 3200 liter coolant tank including cooling unit + fire extinguishing system. *

Condition: good (used), Year of construction: 1990, Hydraulic surface grinding machine with automatic vertical feed Max. grinding length 670 mm Max. grinding width 280 mm Max. grinding height 400 mm Table speed, longitudinal 2 – 35 m/min Table speed, transverse 0.3 – 40 mm/stroke Rapid traverse yes Gjdpfxof Um Rao An Ieug Grinding wheel dimensions 300 / 76 x 40 mm Drive power 4 kW Machine dimensions L x W x H 2000 x 1850 x 2000 mm Machine weight 2300 kg Hydraulic and electrical system dimensions L x W x H 1200 x 800 x 2000 mm Hydraulic and electrical system weight 650 kg Accessories / Special features: • Permanent magnet clamping plate 630 x 200 mm • Automatic vertical feed with digital display • Manual dressing device • Coolant system • Separate hydraulic unit • Grinding wheel • Machine alignment elements Note: o Hydraulic cylinder for table stroke newly sealed o New filters in the hydraulic unit o Handwheel adjustment for transverse stroke newly mounted Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 2004, CNC Surface Grinding Machine CNC control Siemens Sinumerik with handwheel, GRIPS 32 control software spindle drive motor type MS501/5 machine weight approx. 2300 kg, total weight approx. 3500 kg electrical supply 400V, 3-phase, 50Hz, rated current 29A, connected load 20kVA, supply fuses 50A Table clamping surface (standard): approx. 500 x 250 mm, other sizes available upon request Grindable workpiece area incl. 25 mm wheel width: approx. 600 x 300 mm Grindable workpiece area with VJCE cover incl. 25 mm wheel width: approx. 600 x 290 mm Distance from table top to upper limit switch (Y) at 250 mm wheel diameter: approx. 366 mm Max. permissible table load incl. magnetic plate: approx. 130 kg Height above floor: approx. 1085 mm Main spindle drive speed range: 800-4200 rpm, other options available upon request Main drive power: 10 kW at max. rpm, option 5 kW at max. rpm Cutting speed: 35 m/s, other options available upon request Grinding wheel diameter: 300 mm, option 250 mm Grinding wheel width: 25/30 mm, option 50 mm Grinding wheel bore: 76.2 mm, option 50.8/51 mm available upon request Radial wheel wear allowance: approx. 45 mm X-axis pendulum grinding speed (hydraulic, infinitely variable): 1000-24000 mm/min X-axis creep-feed grinding speed (AC servo motor): 5-1000 mm/min X-axis travel between limit switches: approx. 660 mm X-axis usable pendulum stroke: approx. 630 mm Y-axis travel speed: 0.1-2000 mm/min Y-axis travel between limit switches: approx. 360 mm Y-axis measuring system resolution: 0.0002 mm Z-axis travel speed: 0.1-2000 mm/min Z-axis travel between limit switches: approx. 280/275 mm Z-axis travel between limit switches with JC/JCE cover: approx. 270/265 mm Z-axis measuring system resolution: 0.0002 mm Installation length: approx. 3400 mm Installation width: approx. 2700 mm Installation depth (without control pendant): approx. 2440 mm Machine weight without full enclosure and control cabinet: approx. 3000 kg Machine weight with full enclosure and control cabinet: approx. 3700 kg Supply voltage: 400V AC -5% to +10%, 50 Hz, option 60 Hz Control voltage: 230V AC / 24V DC Connected load at 5 kW / 10 kW grinding power: 13.5 / 20 kVA Fuse protection: 35 A Data Guedpfx Anszwfmhj Iog Cooling Unit (Erba/Schüler): equipment no. 85056334 Data Cooling Unit (Hyfra Pedia TRK 20-EF): equipment no. 85056333, year 2004 Data Filter Unit (Airtech MFE 20-SP): serial no. 393196, year 06/2004, rated voltage 230/400V, rated current 3.0A

Condition: good (used), Year of construction: 2006, functionality: fully functional, Table size: 3000 x 1000 mm Drive power: 4.0 kW Belt speed: 8 – 25 m/s Table height adjustment: 0 – 630 mm Belt length: 9000 mm Space requirement: 4750 x 2300 mm Machine height: approx. 2500 mm Compressed air: 6 bar Features: - Two belts for pre- and finish grinding - Triangular guide for the belts, providing unobstructed visibility and freedom of movement - Pneumatic belt tensioning with ball bearings - Adjustable belt speed - Tilting of the belts up to 90° - Belt self-centering - Pneumatically opening belt channels - Manual workpiece movement in 3 axes Gusdpfjzlh Nzox An Ieg - Each axis with brake or locking mechanism - Vacuum clamping for the workpieces

Condition: new, Year of construction: 2024, neu 2024 5544 prompt, Zwischenverkauf v Polen 1370 € 1 75 mm 2.000 x 75 mm 200 x 75 x 42 ø mm 605 mm 3000 1/min 3 kW 1025 mm 500 mm 1000 mm 76 kg Industrial belt grinder with following features: Gjdoynmwwopfx An Isug - Separate emergency stop - Motor brake - Standard - Reliable - Simple and practical operation - Easy to adjust - Quick belt change without tools - 5-year guarantee on the motor - Optimal safety

Condition: new, Year of construction: 2026, width of the strips 50.0 mm band length 940 mm band speed 3.0 - 22 m/min turning speeds 1450 U/min Guedoxaaxqopfx An Iog tube diameter 16.0 - 114 mm radius 180 ° total power requirement 4.75 kW weight of the machine ca. 265 kg range L-W-H 1000 x 750 x 1300 mm Furnishing: - stationary pipe belt grinders - Automatic material feed with separate drive motor - Replacement sanding belts - Stepless speed adjustment - Manual adjustment of tube tension - Polish bent pipes up to 180" (angle). - Manual work possible without feed - CE mark / declaration of conformity

Condition: used, Year of construction: 1991, grinding length 600 mm grinding width 375 mm workpiece height 375 mm workpiece weight 300 kg table surface area 900 * 350 mm grinding spindle speed 1500 / 3000 U/min dimensions of grinding wheel 300 x 50 x 76,2 mm weight of the machine ca. 3,3 t dimensions of the machine ca. 3,1 x 2,6 x 2,1 m Guodpfezycnnex An Ijg MICRO GRANIT has excellent properties for high-precision grinding machine construction. Damping properties: 1:10 ratio compared to gray cast iron, ensures the best grinding quality. Thermal behavior: suitable for grinding operations with µ tolerances. X-axis – table longitudinal movement: - Table switching: extremely quiet, contactless. - Quick adjustment: via cams. - Work table: Mehanit cast iron. - Guide system: two precision flat guides. - Lubrication: plastic coating. - Drive: hydraulic, automatic. - Table stroke: 100–250 mm. - Table speed: 40 m/min. - Switching: via cams, contactless. - Hydraulics: horizontal monoblock. - Table cycle: 30 min. Y-axis – Vertical adjustment of the grinding wheel: - Play-compensating mechanism: > ensures even contact with the guides. - Vertical movement: > via precision lead screw. - Drive: adjustable electric motor.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Processing diameter: 4,200 mm Table speed: 12.3 min-1 Max. workpiece weight: 9,000 kg X-axis: 1,110 mm Processing height: 850 mm Workpiece height: min. 50 / max. 850 mm Gjdpjzz Rciofx An Isug Control system: SIMATIC S7-300 Tool holder: Grinding segments Integrated dressing unit on the grinding head In 2010, the machine underwent a comprehensive mechanical and electrical overhaul. As part of this modernization, the entire automation and drive technology was converted to Siemens technology. The machine is equipped with a MARPOSS P7 in-process measuring system. The measuring system is fully integrated into the Siemens SIMATIC S7-300 PLC control system via PROFIBUS.

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: CE marking, documentation/manual, JWV service is proud to present the new Carif 260 Auto. This fully automatic and compact bandsaw machine is manufactured in Italy using European components. Gusdpfozlf Dcjx An Ijg As the importer, we can arrange a demonstration of the machine at your location.

Condition: excellent (used), Year of construction: 1998, Haffner Door Lock Mortising Machine used, in good condition Manufacturer: Haffner Gsdpfxoyuty So An Ieug Model: SL 100 Machine No.: 5372 Column-type machine Chain mortising unit Door support Workpiece support Spindle for lever hole Spindle for faceplate Lubrication device Extraction port D 80/100 mm Required space approx. 1200 mm x 700 mm x 2000 mm Weight approx. 300 kg Location: 54634 Bitburg Delivery in as-inspected condition, without warranty or guarantee

Condition: new, Year of construction: 2025, functionality: fully functional, With a grinding diameter of 200mm x 300mm long, the JHP-2003CNC is the most compact plunge type grinding machine in the range and utilises the FANUC Oi-TF CNC control. Designed for heavier grinding applications, the JHP-2003CNC can accomadate workholding and components to 80kgs. This fully enclosed machine is supplied with Renishaw probing, full machine enclosure and mist collector. Jainnher CNC Plunge Cylindrical Grinding Machine Description: JHP-2003 CNC Capacity Max ø work swing 200mm dia Max grinding length 300mm Max grinding dia. 200mm dia Max workpiece weight 80 kgs Distance between centres 300mm Centre height 100mm Grinding wheel Grinding wheel size Ø405 x 50 x 127 Max peripheral 33 m/sec Wheel speed 1780rpm Wheel head Feed angle 90 Swivel angle ±0 Rapid traverse speed 6m/min Max. travel 220mm Min. setting unit 0.0001mm Grinding feed rate 0.001~6000m/min Hydrodynamic pressure ----- Tailstock Retraction of sleeve 30mm Sleeve diameter D:48mm Centre taper MT.3 Hydraulic cylinder pressure 20kg Work head Spindle speed (variable) 10~500rpm/min Centre taper MT3 Spindle type Cartridge type Swivel angle 120 (90ºCCW;30ºCW) Work- table Min. setting unit 0.0001mm Swivel angle CCW/CW +10º/-3º Gsdpenxk N Sefx An Ieug Rapid traverse speed 8mm/min Max. travel 640mm Motor Grinding feed rate 0.001~6000mm/min Grinding wheel motor 5HP 4P(opt. 7.5HP) 4P Workhead motor 1.0KW Work table (Z axis) 1.2KW Work table (X axis) 1.2KW Hydraulic pump 1/4 HP 4P Wheel head pump ----- Coolant pump 1/8 HP 2P Magnetic coolant separator 1/25HP 2P Oil cooler ----- Oil tank Hyd. oil tank(slideways, screw ends & measurement) 30L Wheel head lubrication ----- Coolant tank 80L Machine N.W (Fully enclosed) 3800 kg G.W (Fully enclosed) 4100 kg Dimension (Fully enclosed) 3300 x 2100 x 2200mm Packing (Fully enclosed) 3500 x 2200 x 2200mm Jainnher CNC Plunge Cylindrical Grinding Machine Standard Accessories: JAINNHER JHP-2003CNC X-axis linear scale Work lamp Foot pedal Angle adjustment gauge Hydraulic tailstock with manual movement Grinding wheel and flange Tungsten carbide tipped centres (MT3) Automatic lubrication system Diamond dresser at lower worktable Magnetic separator MC-40/coolant tank/pump Levelling bolts and blocks Tool kits and toolbox Fully enclosed splash guard & oil mist device Touch probe gauge (Renishaw) Transformer

Condition: used, Year of construction: 1995, grinding length 600 mm grinding width max. 320 mm workpiece height max. 500 mm magnetic clamping plate 300 x 605 mm horiz. table movement: longitudinal man. max. 750 mm horizontal table movement: cross max 340 mm sanding disc diameter 355 mm table load max. 420 kg grinding wheel width 50 mm bore 127 mm spindle turning speed range 1500 U/min rapid traverse vertical 400 mm/min weight of the machine ca. 2500 kg Guedpfx Anezkv Aye Isg dimensions of the machine ca. ca. 2800x2000x1800 mm