Used Dms Gripper for sale (1,196)

Condition: used, Year of construction: 2016, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 880 mm, 5-Axis Machining Center This machine was used as a showroom machine from 2016 to 2022. From 2022, the machine was used for production at HAL Plauen for the processing of axle carriers. Before being used for production, the machine was completely overhauled/refurbished. In December 2024, a new milling spindle was purchased (the spindle has approximately 500 operating hours). Machine operating hours: 24,000 Working area: -> X-axis 1500 mm -> Y-axis 1250 mm -> Z-axis 880 mm Feed rate / Rapid traverse: -> X-axis 100 m/min Iedpszc Ekrsfx Ag Ujic -> Y-, Z-axis 100 m/min Axis acceleration: -> X-, Y-axis 7 m/s² -> Z-axis 10 m/s² -> Jerk 150 m/s³ Table load capacity: -> Max. weight 400 kg Spindle: -> Tool holder HSK 100 -> Speed range 10,000 rpm -> Power (S6/40% duty) 40 kW -> Max. torque 175 Nm Tool magazine: -> Positions 36 -> Max. tool length 520 mm -> Max. tool diameter (with free adjacent slot) 205 mm -> Max. tool weight 20 kg -> Total load 200 kg -> Tool change time 3 s with chip conveyor and chiller/cooling unit • Manufacturer: Lahntechnik GmbH • Model: KESY 280-01 • Serial number: 2017-05981 • Year of manufacture: 2017 • Power rating: 13.6 kW • Nominal voltage: 400 V / 3~ / PE / 50 Hz • Control voltage: 24 V DC • Protection class: IP 54 • Refrigerant: R410A – 10.03 t CO₂ equivalent • Max. operating pressure: 30 bar (HD) / 19 bar (ND) • Empty weight: 400 kg • Country of origin: Germany The machine/asset does not include any product-related tools/fixtures or grippers (robots). The machine was taken out of production in October 2025 due to the factory closure. It is still powered on and can be inspected in that state. However, it cannot be put into operation for a trial run because no machine operator is available. Please review the videos available, which were taken of the machine in December 2025. Transport locks are not required. For loading and unloading, special Wenzler lifting/transport equipment is required. This equipment must be rented directly from Wenzler/Heller Group by the buyer. After lifting and unloading, the buyer must return the equipment to Wenzler.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 10,020 h, pressing force: 173 t, controller manufacturer: TRUMPF, controller model: TASC 6000, Press brake manufactured in 2017. This TRUMPF TRUBEND CELL 5000 with TRUMPF TruBend 5170 features a maximum press force of 1700 kN and a stroke length of 445 mm. It includes the BendMaster 60 robot for automated handling and a TRUMPF TASC 6000 control system for efficient programming. If you are looking to get high-quality bending capabilities, consider the TRUMPF TRUBEND CELL 5000 press brake we have for sale. Contact us for further details. - Press Brake Model: TruBend 5170 (Extended Version)- Press Brake Max Press Force: 1700 kN- Press Brake Max Working Pressure: 340 bar- Press Brake Length of Stroke: 445 mm- Press Brake Voltage / Frequency: 400 V / 50 Hz- Press Brake Connected Load: 29 kVA- Press Brake Control Voltage: 24 V- Robot Model: BendMaster 60- Robot Connected Load: 17 kVA- Robot Weight: 2600 kg- Robot Voltage / Frequency: 400 V / 50 Hz- Control System: TRUMPF TASC 6000 (Graphical workshop programming, network capability)- Included Equipment: Extended version press brake, BendMaster 60, automated material handling/grippers, fencing and safety enclosuresTRUMPF BENDMASTER 60- Working Hours: 56,582 h (As of 14.05.2025)- Load Capacity: 60 kg (Sheet metal piece plus gripper)- Sheet Metal Capacity: Up to 40 kg- Supply Voltage: 400 V (3~ Phase)- Frequency: 50 Hz- Connected Load: 14 kVA- Control Voltage: 24 V- Max. Fuse Rating: 32 A- Manipulator Axis System: 6-axis backgauge sensor system- Floor Track: Ground track rail extended to 10 m- Control Unit: PC-based TRUMPF control with terminal (Monitor, mouse, keyboard)- Material Handling Features: Contour recognition sheet sensor, double sheet detection sensor, rotary union for rapid tool-less gripper exchange, gripper coupling on BendMaster- Included Vakuum/Gripping Gear: 3 modular vacuum grippers without separation unit, 1 mechanical tong gripper with rotary axis (including 3 sets of additional jaws)- Feeding Station: 1 sheet extraction station with linear axis- Peripheral Accessories: 1 gripper changing console (max. 4), 1 mobile fanning magnet, safety enclosure fence with access door Iiedpfx Agoza U Nfo Usc Technical Specification Bending Length 4250 mm

Condition: ready for operation (used), Year of construction: 2003, operating hours: 124,706 h, spindle speed (max.): 6,300 rpm, travel distance X-axis: 370 mm, travel distance Z-axis: 250 mm, spindle motor power: 10,700 W, controller manufacturer: TRAUB, controller model: TX8i (64-bit), number of axes: 6, This 6-axis TRAUB TNK 36 was manufactured in 2003. It features a maximum spindle speed of 6,300 rpm and a main spindle bore of 36 mm. The machine is equipped with advanced capabilities such as tool monitoring, rigid tapping, and a high-pressure coolant system. If you are looking to get high-quality turning capabilities, consider the TRAUB TNK 36 horizontal turning machine we have for sale. Contact us for further details. TECHNICAL DATA • MDE Interface: Yes • Tool Monitoring: Yes • Rigid Tapping: Yes (without compensation chuck) • Main Spindle Bore: 36 mm • Main Spindle Drive Power: AC 6.7 / 10.7 kW • Top Turret Stroke X/Z: 50 / 100 mm • Rear Attachment Stroke X: 73 mm • Rear Attachment Stroke Y: ±50 mm • Main Spindle C-Axis: Yes • Hainbuch Change Parts: Yes • Hainbuch Setup Aid Base Body: Yes • Hainbuch Manual Change Device: Yes • Counter Spindle: Motor Spindle • Counter Spindle C-Axis: Yes • Counter Clamping Pressure Device: Yes • Workpiece Ejection Device: Yes • Hainbuch Axfix Chuck: Yes • Upper Tool Carrier: Yes • Electronic Gearbox: Yes • X3 Cross Axis for Front Unit: Yes • Front Unit: 5-position • Driven Tools on Front Unit: Yes • Cut-Off Side Machining Station: Yes • Driven Tools on Cut-Off Side Station: Yes • Workpiece Unloading Device: Gripper • Coolant Tank Capacity: 230 l • Coolant Pressure: 7 bar • Coolant Flow Rate: 50 l/min • Internal Coolant Supply: 30 bar • High Pressure Coolant: 120 bar (front and rear machining station) • Coolant Filter: Knoll VRF 150/750 Vacuum Rotary Filter • Suitable Materials for Filter: Aluminum, Plastic, Brass, Steel • Wash Gun: Yes • Connected Load: 22 kW • Maximum Bar Length: 3 m • Maximum Bar Diameter: 36 mm • Operating Voltage: 400 V, 3~, 50 Hz • Control Voltage: 24 V AC • Valve Voltage: 24 V DC • Clutch Voltage: 24 V DC • Total Installed Power: 33 kW • Total Rated Current: 60 A ADDITIONAL EQUIPMENT OPTIONAL • FMB turbo 5-42 XT / 3200"C" Bar Feeder • Bar Feeder Year: 2003 • Hinged Belt Chip Conveyor • Chip Conveyor Discharge Height: 950 mm • Guide Tubes D25, D36 • Running Workpiece Stop, Shank 16 × 16 mm • Brankamp CMS 100 Collision Monitoring Iodpfx Ajza Ucxeg Ujic Technical Specification Through-spindle Coolant Yes Counter Spindle Yes Driven Tools Yes

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, loading space length: 6,000 mm, loading space width: 2,480 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Volvo FH 500 8x4 Crane F705 R.2.7 L436 V20 NEW MODEL Removable flatbed with drop sides 4400x2500x600 mm Fifth wheel plate Volvo: New Model 2026!! * FH sleeper cab * Wheelbase 4600 mm * Exhaust emissions according to Euro 6 Stage E, with SCR, particulate filter, and EGR * 12.8 l diesel engine, 510 hp / 375 kW, 2,550 Nm * Volvo Engine Brake+ (VEB+), braking power 510 hp / 375 kW (D13K) * Complies with ADR brake regulations * I-Shift AT2612F, automated 12-speed transmission (direct drive), max. input torque: 2,652 Nm * Rear axle RSS1370A, single reduction, 13 t axle load, GVW 70 t * AA tires 315/70R22.5 * Drive axle ratio 2.85:1 * Diesel fuel tank * Driver comfort package * Air conditioning with automatic temperature control and sun sensor * Information & media package with navigation * Radio: AM/FM * 3 x USB ports * 8 speakers * High instruments: digital driver info display, 12" with 4 views * Second driver info display, 9" display * Navigation system: TOMTO * AGM batteries, 2 x 210 Ah * Battery indicator in the display (voltage, amperage, battery status with warning function) * Main switch on chassis * 330 L aluminum tank on right, D-shape, 710 mm high, 830 mm long * Fuel tank, standard ground clearance * AdBlue tank on left, usable capacity 64 liters * Lockable tank cap * Spill guard for tank filler neck * Exhaust to rear * 2 foldable wheel chocks, transport mounted * Rear and side marker lights * Towing crossmember with D-value = 190 kN for G-150/G-260 hole pattern * Towing crossmember to frame end 85 mm * Frame length rear 4395 mm, measured from drive axle/1st drive axle * Towing hitch Rockinger 400 G-150 (observe D-value / max. trailer load!) * Electrical connection for semi-trailer/trailer, 15-pin * Trailer/semi-trailer connection Duomatic * Trailer connections centrally positioned * Stationary trailer brake (active up to 7 km/h) * Rear underrun protection, aluminum, fixed, thin * 4x VA tires 385/55R22.5 Continental, Hybrid HS3+, rolling resistance class: C, steering axle 4x AA tires 315/70R22.5 Continental, Hybrid HD3, rolling resistance class: C, drive axle 2x NLA tires 385/55R22.5 Continental, Hybrid HS3+, rolling resistance class: C, tag axle * Electric venting pump * Transmission/I-Shift operation via control unit on driver's seat * I-Shift driving modes: Standard, Performance, and Economy * Auto return to Economy mode * No manual intervention in automatic mode, no kickdown * Cruise control * Gearbox oil cooler, basic, water/oil Iisdjywfxgspfx Ag Uec * 2-cylinder air compressor, 1100 l/min, for vehicles/combinations with increased air requirement * Front air intake with standard air filter * Alternator 150A / 4200W * External noise per ECE R51.03 Phase 2, with low-noise certificate and L-plate * Closed crankcase ventilation * Dual fuel filter on engine, large, for poor fuel quality (e.g. Eastern Europe) * Fuel filter with water separator * PTO (mid-speed PTR-DM), gearbox-mounted, interface: 1 DIN rear for pump * NA at gearbox, max. output 600 Nm * Dynamic Package: seats in fabric (blue/dark blue) with interior in gray fabric Driver's seat comfort, air-sprung, heated, integrated seatbelt * Passenger seat standard, air-sprung * Lower foldable bunk, 2000x815/740/660 mm (middle, upper, lower) with safety net * Cab auxiliary heater, 2 kW * Storage under bunk * Refrigerator with 33 L freezer compartment under bunk * Vanity/shaving mirror * Cab insulation

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, loading space length: 6,000 mm, loading space width: 2,480 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Volvo FH 500 8x4 Crane F705 R.2.7 L436 V20 NEW MODEL Removable flatbed with drop sides 4400x2500x600 Fifth wheel Volvo: New model 2026!! * FH sleeper cabin * Wheelbase 4600 mm Isdpfsywfxaex Ag Ujic * Emissions in accordance with Euro 6 Stage E, with SCR, particulate filter, and EGR * Diesel engine 12.8 l, 510 hp / 375 kW, 2,550 Nm * Volvo Engine Brake+ (VEB+), engine brake output 510 hp / 375 kW (D13K) * ADR brake regulations compliant * I-Shift AT2612F, automated 12-speed gearbox (direct drive), max. input torque: 2,652 Nm * Rear axle RSS1370A, single reduction, 13 t axle load, GVW 70 t * AA tires 315/70R22.5 * Drive axle ratio 2.85 : 1 * Diesel fuel tank * Driver comfort package * Air conditioning with automatic temperature control and sun sensor * Info and media package with navigation * AM/FM radio reception * USB ports, 3x * 8 speakers * High Instruments: digital driver display, 12'' with 4 views * Second driver info display, 9" display * Navigation system "TOMTO" * AGM batteries, 2 x 210 Ah * Battery indicator on display (volts, amperes, and battery status with warning function) * Main switch on chassis * 330 L aluminum tank on the right, D-shape, 710 mm high, 830 mm long * Fuel tank, normal ground clearance * AdBlue tank left, usable capacity 64 liters * Lockable tank cap * Tank filler neck, anti-spill protection * Rear-facing exhaust * 2 foldable wheel chocks, transport mounted * Rear and side marker lights * Trailer crossmember with D-value = 190 kN for G-150/G-260 bolt pattern * Trailer crossmember to end of frame 85 mm * Rear frame length 4395 mm, measured from drive axle/first drive axle * Trailer coupling Rockinger 400 G-150 (observe D-value/max. trailer load!) * Electrical connection for semi-trailer/trailer, 15-pin * Trailer/semi-trailer connector Duomatic * Trailer connections in center * Stationary trailer brake (active up to 7 km/h) * Rear underrun protection, aluminum, fixed, slim * 4x VA tires 385/55R22.5 Continental, Hybrid HS3+, rolling resistance class: C, steering axle 4x AA tires 315/70R22.5 Continental, Hybrid HD3, rolling resistance class: C, drive axle 2x NLA tires 385/55R22.5 Continental, Hybrid HS3+, rolling resistance class: C, tag axle * Electric vent pump * Gearbox/I-Shift control via operating unit on driver's seat * I-Shift driving modes: standard, performance and economy * Auto return to economy mode * No manual override in automatic mode, without kickdown * Cruise control (tempomat) * Gearbox oil cooler, basic, water/oil * 2-cylinder air compressor, 1100 l/min, for vehicles/combinations with increased air demand * Front air intake with standard air filter * Alternator 150A/4200W * External noise to ECE R51.03 phase 2, with low-noise certificate and L-label * Closed crankcase ventilation * Dual fuel filter on engine, large for poor fuel quality e.g. in Eastern Europe * Fuel filter with water separator * PTO (medium speed PTR-DM), gearbox side, connection: 1 DIN rear for pump * PTO on gearbox, max. output 600 Nm * Dynamic equipment: fabric seats, yl (blue/dark blue) with fabric interior in gray Driver comfort seat, air-suspended, heated, belt in seat * Passenger seat standard, air-suspended * Lower bed, foldable, 2000x815/740/660 mm (middle, top, bottom) with safety net * Cab auxiliary heater, 2 kW * Storage under bed * Refrigerator with freezer compartment 33 L under bed * Vanity/shaving mirror * Cab insulation

Condition: new, mileage: 500 km, power: 368 kW (500.34 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, Volvo FH 500 8x4 Crane F705 R.2.7 L436 V20 NEW MODEL Removable flatbed with drop sides 4400x2500x600 mm + extension Fifth Wheel Coupling Volvo: * New Model * FH sleeper cab * Wheelbase: 4600 mm * Emission standard: Euro 6 Step E with SCR, particulate filter, and EGR * Diesel engine 12.8 l, 510 hp / 375 kW, 2,550 Nm * Volvo Engine Brake+ (VEB+), braking power 510 hp / 375 kW (D13K) * Complies with ADR brake regulations * I-Shift AT2612F, automated 12-speed gearbox (direct drive), max. input torque: 2,652 Nm * Rear axle RSS1370A, single reduction, 13 t axle load, GCW 70 t * AA tyres 315/70R22.5 * Drive axle ratio 2.85 : 1 * Diesel fuel tank * Driver comfort package * Air conditioning with automatic temperature regulation and sun sensor * Info and media package with navigation * Radio: AM/FM Iiedpfsywfwijx Ag Uoc * 3x USB ports * 8 speakers * High-level instruments: 12'' digital driver's info display with 4 views * Second driver info display, 9'' display * Navigation system "TOMTO" * AGM batteries, 2 x 210 Ah * Battery status display (voltage, amperage and status with warning function) * Main switch on chassis * 330 L aluminium tank right, D-form, 710 mm high, 830 mm long * Standard ground clearance fuel tank * AdBlue tank left, usable capacity 64 litres * Lockable tank cap * Spill guard tank filling nozzle * Exhaust at rear * 2 folding wheel chocks, transport mounted * Rear and side marker lights * Trailer cross member with D-value = 190 kN for G-150/G-260 hole pattern * Trailer cross member to frame end: 85 mm * Rear frame length: 4,395 mm, measured from drive axle/first drive axle * Trailer coupling Rockinger 400 G-150 (observe D-value/max trailer load!) * Electrical connection for semi-trailer/trailer, 15-pin * Trailer/semi-trailer Duomatic connection * Central trailer connections * Stationary trailer brake (active up to 7 km/h) * Rear underrun protection, aluminium, fixed, thin * 4x VA tyres 385/55R22.5 Continental, Hybrid HS3+, rolling resistance class: C, steering axle * 4x AA tyres 315/70R22.5 Continental, Hybrid HD3, rolling resistance class: C, drive axle * 2x NLA tyres 385/55R22.5 Continental, Hybrid HS3+, rolling resistance class: C, tag axle * Electric venting pump * Gearbox/I-Shift control via driver seat console * I-Shift driving modes: Standard, Performance, and Economy * Automatic return to Economy mode * No manual override in automatic mode, no kickdown * Cruise control * Gearbox oil cooler, basic, water/oil * Two-cylinder air compressor, 1,100 l/min, for vehicles/combinations with high air demand * Forward air intake with standard air filter * Alternator 150A/4200W * External noise as per ECE R51.03 Phase 2, with low noise certificate and L-plate * Closed crankcase ventilation * Dual fuel filter system at engine, large for poor fuel quality (e.g. Eastern Europe) * Fuel filter with water separator * PTO (medium speed PTR-DM), gearbox side, connection: 1 DIN rear for pump * PTO on gearbox, max output 600 Nm * Dynamic equipment: seats in fabric (blue/dark blue) with grey fabric interior * Comfort driver’s seat: air-suspended, heated, seat-integrated belt * Standard co-driver seat, air-suspended * Lower bunk, foldable, 2000x815/740/660 mm (middle, top, bottom) with safety net * Cab parking heater, 2 kW * Storage under the bunk * Refrigerator with 33 L freezer compartment under the bunk * Vanity/shaving mirror * Cab...

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, loading space length: 6,000 mm, loading space width: 2,480 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Volvo FH 500 8x4 Crane F705 R.2.7 L436 V20 NEW MODEL detachable platform with drop sides 4400x2500x600 Fifth wheel coupling Volvo: New model 2026!! * FH sleeper cab * Wheelbase 4600 mm * Emissions per Euro 6 Step E with SCR, particulate filter, and EGR * 12.8 L diesel engine, 510 HP/375 kW, 2,550 Nm * Volvo Engine Brake+ (VEB+) engine brake. Braking power 510 HP/375 kW (D13K) * Complies with ADR brake regulations * I-Shift AT2612F automated 12-speed gearbox (direct-drive), max. input torque: 2,652 Nm * Rear axle RSS1370A, single reduction, 13 t axle load, GCW 70 t * AA tires 315/70R22.5 * Drive axle ratio 2.85 : 1 * Diesel fuel tank * Driver comfort package * Air conditioning with automatic temperature control and sun sensor * Info and media package with navigation * Radio reception: AM/FM * 3x USB ports * 8 speakers * High instruments: digital driver's info display, 12'' with 4 views * Second driver's info display, 9'' bdisplay * Navigation system "TOMTO" * AGM batteries, 2 x 210 Ah * Battery status display (voltage, amperage, battery status incl. warning) * Main electrical switch on chassis * 330 L aluminum tank right, D-shape, 710 mm high, 830 mm long * Fuel tank, standard ground clearance * AdBlue tank left, usable volume 64 liters * Lockable fuel cap * Spillover protection on tank filler * Exhaust rear discharge * 2 folding wheel chocks, transport mounted * Rear and side marker lights * Trailer cross member with D-value = 190 kN for G-150/G-260 hole pattern * Trailer cross member to end of frame 85 mm * Frame length rear 4395 mm, measured from drive axle/first drive axle * Trailer coupling Rockinger 400 G-150 (D-value/max. trailer weight must be observed!) * 15-pin electrical connection for semi-trailer/trailer * Trailer/semi-trailer Duomatic connection * Trailer connections centered * Stationary trailer brake (active up to 7 km/h) * Rear underride protection, fixed, thin aluminum * 4x VA tires 385/55R22.5 Continental, Hybrid HS3+, rolling resistance class: C, steer axle 4x AA tires 315/70R22.5 Continental, Hybrid HD3, rolling resistance class: C, drive axle 2x NLA tires 385/55R22.5 Continental, Hybrid HS3+, rolling resistance class: C, tag axle * Electric air release pump * Gearbox/I-Shift control via driver's seat control panel * I-Shift drive mode: Standard, Performance, and Economy Isdpfsywfvxjx Ag Uoic * Auto return to Economy mode * No manual interventions in automatic mode, without kickdown * Cruise control * Transmission oil cooler, basic, water/oil * Air compressor 2-cyl., 1100 l/min., for vehicles/combinations with high air demand * Air intake front with standard air filter * Alternator 150A/4200W * Exterior noise per ECE R51.03 phase 2, with noise reduction certificate and L-plate * Closed crankcase ventilation * Dual fuel filters on engine, large size for poor fuel quality (e.g. Eastern Europe) * Fuel filter with water separator * PTO (medium speed PTR-DM) gearbox-mounted, 1 DIN rear connection for pump * PTO on gearbox, max. output 600 Nm * Dynamic trim: seats in fabric, yl (blue/dark blue) with interior in grey fabric Comfort driver seat, air-suspended, heated, seatbelt integrated * Standard passenger seat, air-suspended * Lower folding bunk, 2000x815/740/660 mm (middle, top, bottom) with safety net * Cab heater, 2 kW * Storage below the bunk * Refrigerator with 33 L freezer under bunk * Make-up/shaving mirror * Cab insulation

Condition: new, mileage: 500 km, power: 368 kW (500.34 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, Volvo FH 500 8x4 Crane F710 RA2.27 with Jib and Winch – Tractor Unit, Immediately Available Removable drop-side platform body 4400x2500x600 mm + extension Fifth wheel coupling Volvo: New model * FH sleeper cab * Wheelbase: 4600 mm * Emissions: Euro 6 Step E, with SCR, particulate filter, and EGR * Diesel engine 12.8 l, 510 hp/375 kW, 2,550 Nm * Volvo Engine Brake+ (VEB+), braking power: 510 hp/375 kW (D13K) * Compliant with ADR braking regulations * I-Shift AT2612F, automated 12-speed transmission (direct drive), max. input torque: 2,652 Nm * Rear axle RSS1370A, single reduction, 13 t axle load, GCW 70 t * AA tires 315/70R22.5 * Drive axle ratio 2.85:1 * Diesel fuel tank * Driver comfort package Iijdpfx Aeywfwveg Usc * Air conditioning with automatic climate control and sun sensor * Info and media package with navigation * Radio: AM/FM * 3x USB ports * 8 speakers * High instrument cluster: 12'' digital driver display with 4 views * Second driver’s info display, 9'' b-display * Navigation system: TOMTOM * AGM batteries, 2 x 210 Ah * Battery status display (voltage, amperage, and condition with warning function) * Main switch on chassis * 330 L aluminum fuel tank on right, D-shape, 710 mm high, 830 mm long * Fuel tank, standard ground clearance * AdBlue tank on left, usable capacity 64 L * Lockable fuel cap * Splash protection on tank filler neck * Exhaust outlet to rear * 2 foldable wheel chocks, transport mounted * Marker lights rear and side * Trailer crossmember with D-value = 190 kN for G-150/G-260 mounting pattern * Trailer crossmember to frame end: 85 mm * Rear frame length: 4395 mm, measured from drive axle/first drive axle * Rockinger 400 G-150 trailer coupling (observe D-value/max. trailer weight!) * Electrical trailer/semi-trailer connection, 15-pin * Trailer/semi-trailer Duomatic connection * Trailer connections in the center * Stationary trailer brake (active up to 7 km/h) * Rear underrun protection, aluminum, fixed, thin * 4x VA tires 385/55R22.5 Continental, Hybrid HS3+, rolling resistance class: C, steering axle * 4x AA tires 315/70R22.5 Continental, Hybrid HD3, rolling resistance class: C, drive axle * 2x NLA tires 385/55R22.5 Continental, Hybrid HS3+, rolling resistance class: C, trailing axle * Electric venting pump * Transmission/I-Shift control via unit on driver’s seat * I-Shift driving modes: Standard, Performance, and Economy * Auto-return to Economy mode * No manual intervention in automatic mode, no kickdown * Cruise control * Transmission oil cooler, basic, water/oil * 2-cylinder air compressor, 1100 l/min, for vehicles/combinations with increased air consumption * Front air intake with standard air filter * Alternator: 150A/4200W * External noise level per ECE R51.03 Phase 2, with low noise certificate and L sign * Closed crankcase ventilation * Dual fuel filters on engine, large size for poor fuel quality (e.g., Eastern Europe) * Fuel filter with water separator * PTO (medium speed PTR-DM), gearbox side, connection: 1x rear DIN for pump * PTO on gearbox, max. power: 600 Nm * Dynamic trim: fabric seats, yl (blue/dark blue), interior trim in grey fabric * Comfort driver’s seat: air-suspended, heated, seatbelt integrated * Standard air-suspended passenger seat * Lower bunk, folding, 2000x815/740/660 mm (center, top, bottom) with safety net * Cab parking heater, 2 kW * Storage under bunk * 33 L fridge with freezer compartment under bunk * S

Condition: used, Year of construction: 1987, Final compression pressure: 10 pe/bar Speed: 745 rpm Volume flow: 3455 dm³/min Motor power: 22 kW Iodexygblepfx Ag Usic

Condition: used, mileage: 140,278 km, power: 96 kW (130.52 HP), first registration: 05/2019, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 7,030 mm, total width: 2,115 mm, total height: 3,065 mm, loading space length: 4,377 mm, loading space width: 2,044 mm, loading space height: 2,146 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, tail-lift, Errors and prior sale excepted! Internal number: 1082. 2K50928 ----EQUIPMENT Iiedpfx Aoyht H Esg Uoc * SCHUTZ vehicle body with box body * SÖRENSEN tail lift * Reverse camera * Seat belts: 3-point height-adjustable seat belts with pyrotechnic belt tensioners * ABS * Storage: - Storage compartment under driver’s seat (not with seat base cover) - Storage compartments in front doors - Recess above glove compartment - Storage compartments above ventilation outlets in the center dashboard - Removable container under passenger seat - Right lockable glove compartment (5.3 dm³) - Lockable center storage compartment (11.38 dm³) * Driver’s airbag * Interface box for body manufacturer * Exterior mirrors, incl. integrated side indicators and wide-angle inserts * Mechanical brake assist * Rev counter * Electronic Stability Program (ESP) incl. ASR with indicator - Hydraulic brake assist - Hill holder (automatic hold for hill starts) - Load Adaptive Control (adjusts ABS, ASR, and ESP functions to vehicle load) * Power windows front, with comfort function for driver’s side * Transmission: 6-speed manual * Headrests (3) * Paint: solid color * Steering wheel with reach adjustment * Manual headlight leveling * Multifunction display with clock, warnings for headlights on and preset speed limit exceeded, and onboard computer * Particulate filter: diesel soot filter * Upholstery: fabric * Radio pre-wiring (cables and antenna) * Black side protection strips * Power steering * Seats: passenger double bench seat with folding table in center backrest * Seats: driver’s seat with longitudinal, height and backrest adjustment, armrest, and lumbar support * 12V socket in center console * Service interval display * Immobilizer with transponder * Central locking with high-frequency remote control ... and much more. ----The vehicle is in unprepared condition! Nationwide delivery available for an additional charge. Errors and prior sale excepted. We are happy to accept your vehicle as trade-in. Financing / Leasing possible even without down payment! Do you have any questions? We are happy to advise you!

Condition: repair required (used), Year of construction: 1963, LZ lathe Fabr.Harrison Type:L 12 Bj.1963 Ijdoibdz Iopfx Ag Usic Machine has clutch defect. Chuck Dm.160 mm Tool holder Multifix B turning diameter : 213 mm Center length : 610 mm spindle bore : 32 mm spindle speeds : 34-2000rpm Machine documentation available.

Condition: good (used), Year of construction: 2010, LZ-Lathe Fabr.JET Type :GHB-1330 Bj.2010 with 3 ash digital indicator, 3 jaws lathe chuck DM 160 mm tool holder Multifix size A, 2 steady rests coolant device. Turning diameter overbed: 330 mm Turning diameter over face: 197 mm Center width: 750 mm Iiedpoqwgzqefx Ag Ujc Spindle speeds: 70-2000 rpm spindle bore : 38 mm Machine in good condition from the training workshop Machine documentation available .

Condition: good (used), Year of construction: 1998, Semi-automatic circular sawing machine Make KASTO Type:V350 U Year 1998 with mitre cut, roller conveyor and stop Saw blade dm.350mm Pneumatic vice and saw feed Iedpfxofym Ewo Ag Uoic Stepless. Machine little used in good condition.

Condition: excellent (used), Year of construction: 2002, ALU-profile mitre saw Fabr.Dry Tech Type:355 MLS Year 2002. Saw blade dm.355 mm Iedetwn E Uepfx Ag Ujic Cutting range round max.120 mm Square max 120 mm X 120 mm

Condition: like new (used), Year of construction: 2013, operating hours: 250 h, Wide-belt sanding machine Bütfering Type: SWT 315/C Optimat Year of manufacture: 2013 Working width: 1350 mm Feed rate: 2.5 – 13 m/min, adjustable via frequency converter 1 combination unit with steel contact roller, with three options: - infinitely variable, frequency-controlled cutting speed 2-18 m/s, - calibration sanding with profiled contact roller - veneer and lacquer sanding - one electro-pneumatic segmented pressure bar with 25 mm segmentation - protected storage area on the machine for storing additional sanding pads - adjustable sanding belt blowing device, 5-stage adjustable, application-optimized cleaning results with low compressed air consumption Technical data: Working width: 1350 mm Sanding belt width: 1350 mm – 1380 mm Iijdozb Ikxepfx Ag Uec Belt change side: left Workpiece thickness: 3 – 160 mm Operating voltage: 400 V / 50 Hz Drive motors: Unit: 20 kW Total connected load: approx. 23 kW Extraction nozzle: 1 x Dm 180 mm (unit) Extraction volume: approx. 1,830 m³/h BL 1 (1350 MM) BELT LENGTH 2150 MM Sanding belt length: 2150 mm UPGRADE TO MPS 1 Design of the segmented pressure bar as an electromagnetic segmented pressure bar MPS with program-controlled, current-controlled adjustment of the sanding pressure of each individual sanding segment, with 2 buttons per actuator in a 25 mm grid VAKIX 1/2 (1350 MM) VACUUM INTEGRATED (T3) High-performance fan for connection to a prepared vacuum clamping device with a 3 kW fan, nozzle diameter: 160 mm Extraction volume: 940 m³/h FBM (1350 MM) FINISHING BRUSH Driven finishing brush on the outfeed side of the machine Nozzle diameter: 140 mm Extraction volume: 1100 m³/h ATA 2 (1350 MM) SUPPORT TABLE, FOLDABLE Support table approx. 900 mm long with an integrated roller at the outfeed (foldable) Machine weight: 2800 kg

Year of construction: 1998, condition: good (used), machine/vehicle number: PM 1000_01, 1x polishing machines for robot processing sold. Execution 1 x left Manufacturer: SHL Ijdpfx Agod S R Ago Ueic polishing wheels DM - 1000 mm drive power 7,5 kW Infeed suction flap

Year of construction: 2022, condition: new, Robot - Belt Grinding Machine is a belt grinding machine for robotic machining with a contact wheel for grinding parts made of aluminum, steel, brass and zinc die casting. Technical data: Contact wheel: max. Ø 400 mm grinding belt length: 3500 mm grinding belt width: max. 150 mm Suction connection: Ø 160 mm dimensions (LxWxH ): 900 x 700 x 1800 mm Weight: approx. 350 kg Electrical connection: 3 x 400 V, 4 kW Iedpfx Ajgxug Nog Ujic Compressed air connection: 6 - 8 bar Noise level: > 85 dB(A) spindle diameter: 35 mm Belt grinding unit for grinding belts max. 150 mm x 3500 mm length with pneumatic belt tensioning, belt tear control, 4 kW drive power, frequency controlled, for contact wheels max. DM 350 mm x 150 mm, drive and deflection rollers

Year of construction: 2022, condition: new, Robot - Belt Grinding Machine is a belt grinding machine for robotic machining with a contact wheel for grinding parts made of aluminum, steel, brass and zinc die casting. Technical data: Contact wheel: max. Ø 400 mm grinding belt length: 3500 mm Isdegxug Topfx Ag Ujic grinding belt width: max. 150 mm Suction connection: Ø 160 mm dimensions (LxWxH ): 900 x 700 x 1800 mm Weight: approx. 350 kg Electrical connection: 3 x 400 V, 4 kW Compressed air connection: 6 - 8 bar Noise level: > 85 dB(A) spindle diameter: 35 mm Buffer: 50 mm Belt grinding unit for grinding belts max. 150 mm x 3500 mm length with pneumatic belt tension, belt tear control, 4 kW drive power, frequency controlled, for contact wheels max. DM 350 mm x 150 mm, drive and deflection rollers, with buffer 50 mm

Condition: new, Bore diameter variabel mm Number of heads horizontal 3 St. Number of heads vertical 4 St. weight 1500 kg Dimensions (L/W/H) 4800x1600x2400 mm Width mit Auflage 2300 mm Götzinger Power Drill Type BF 297 With the Götzinger PowerDrill you can, depending on the type and design: Griffoliven drill on the loose frame part or for finished wings, with multi-spindle drilling head, quick-change, also for milling of the lock case for WK 2 or intermediate gear Ecklager drill on loose frame part, with Mehrspindelbohrkopf, quick-change, corner-oriented over stop or custom made (tilt window) Drill vertically from above for fitting, pre-drill for clip on loose frame part Milling vertically from above for pushers, profile cylinders, 3-D hinges Horizontal drilling with 2 drilling units, different drilling diameters, Dowel drill front and long side, plywood / fighter, sprouts, Corner connection, front door etc. Milling horizontally for lock case / fitting etc. machine description Base frame in stable welded construction, linear guide for the X-axis Table top 3,000 x 200 mm 6 clamping cylinder pneumatic with auto. Ausweichhub 2 side stops for machining on the front side, manually swiveling in and out 2 longitudinal stops can be manually swiveled in and out Travel: X-axis - 3,000 mm working length Y-axis - 120 mm Z-axis - 105 mm Aggregate: 1 drilling unit (unit 1) vertically from above, drill motor 1,1 KW Speed ??1,500 - 12,000 rpm, 1 spindle, collet holder ER 20 1 Bohraggreagt (unit 2) vertically from above, drill motor 1,1 KW Speed ??3,000 rpm, with drill head quick change device 1 boring head BKF 3, olives, quick-change 1 boring head BKF 3/2 corner bearing, quick-change 1 milling unit (Agg.3) vertically from above, milling motor 2 KW, 1,500 - 16,000 rpm, collet holder ER 25 2 horizontal drilling units (Agg.4 and 5) 1.0 KW, 1.500 - 12.000 U / min, Collet holder ER 20 1 milling unit horizontal (Agg.3) 2.0 KW, 1.500 - 16.000U / min, Collet holder ER 20 Electro-pneumatic control with 3-axis control X, Y, Z NC positioning controller make B + R input via TFT display 10 " Machine complete with 1 set of drilling tools dm 6, 8, 10 and 12, 2 roughing carbide cutters HM dm 16, CE compliant, ready for connection Iiedpfsd Ih Hqox Ag Ujc Suction connection: 1 x dm 120 Power connection: 1 x 400 V, 16 amps Air connection: 1 x LW 9 mm OPTION: Longitudinal stops right / left with NC axis high / low programmatically, thus dimension input by folding / light measure possible, Dimension: LxWxH = 4.80 x 1.60 x 2.40 m - weight machine 1,500 kg (technical data according to manufacturer - without guarantee!)

Condition: used, Year of construction: 2012, Industrial robot Manufacturer: Kuka Type: KR120 R2500 pro with Kräutner DKP1 tilting table Year of manufacture: 2012 Operating hours: under 200 hours Reach: 2,496 mm Weight: 1,049 kg Payload: 120 kg Kuka KRC4 control system with 2 additional axes Year of manufacture: 2012 Weight: 140 kg Software: KSS 8.2.15 User Tech 3.1.2 Iijdoxp N A Rjpfx Ag Ujc Expert Tech 3.1.0 Gripper-Spot Tech 3.0.1 Remote Service 1.0.0 Interface X11 for safety circuit Interface Beckhoff EtherCat for digital I/O Kuka TouchPad KCP4 Kuka connecting cables ä3626

Condition: new, Year of construction: 2023, operating hours: 10 h, MAIN SPINDLE Maximum turning diameter: 20 mm Max. spindle bore diameter: 24 mm Maximum speed [rpm]: 10,000 Maximum power [kW]: 3.7 C-axis with 0.001° Stroke Z1 [mm]: 50mm /160mm Synchronous guide bush unit Guide bush type: 22.001 / T223 Type of collet chuck: 145E / F25 COUNTER SPINDLE Maximum speed [rpm]: 8,000 Maximum power [kW]: 2.2 Maximum pick-up diameter [mm]: 20 max. part length ejection to the front [mm]: 70 C-axis with 0.001° Stroke Z2 [mm]: 215 Type of collet chuck: 145E / F25 TOOLING OPTIONS Tool slide X1,Y1: - Tool holder plate for 6 external turning tools 12 x 12 mm Cross drilling/milling device: - Quantity: 4 driven ER16 modular drilling/milling spindles - Power: [kW]: 1.1 (S6000) - Front drilling unit for 5 drilling quills diameter 25 mm Cross slide counter spindle - Quantity: 2 driven drilling/milling spindles ER16 modular - Power: [kW]: 1.0 (S6000) Back machining Iiodpfx Agjtw Uzvs Ujc 6 driven tools axial ER16 2 driven tools radial ER16 3 turning tool holders 12x12 XD20III 1.0 kW (Fanuc) 1.02 kW (Siemens) TRAVERSING AXES AND CONNECTED LOAD Number of servo axes: 5 Number of spindle axes: 2 Rapid traverse speeds m/min: 32m/min (Z1,Z2,Y,X2) ; 24 m/min (X1) Connected load [KVA]: 15 CONTROL Control type: Fanuc 0i-TF Number of axes: 5 (X1, Z1, Y1, X2, Z2) Simultaneous 4-axis control External control panel with handwheel 10.4" color monitor LCD/MDI Automatic switch-off function PowerOff Program check function (test run possible via handwheel) Continuous thread cutting cycle Runtime display / parts counter CF card interface Tool radius compensation Absolute reference point Self-diagnosis function Interface to bar feeder Interface for JBS ACCESSORIES / INCLUDED Alignment shoes with leveling elements Tool box and service tool set Work area light Signal lamp (3-color) Safety door switch with interlock Maintenance and central lubrication unit (1.8 liter lubricating oil volume) Coolant flow monitoring Pneumatic blow-out device for the pick-up spindle gripper Manual and documentation in German and English (maintenance and operating instructions incl. parameter list and test log)

Year of construction: 2022, condition: new, Robot - Belt Grinding Machine is a belt grinding machine for robotic machining with a contact wheel for grinding parts made of aluminum, steel, brass and zinc die casting. Technical data: Contact wheel: max. Ø 400 mm grinding belt length: 3500 mm grinding belt width: max. 150 mm Iisdpfx Agjgxug Eo Usc Suction connection: Ø 160 mm dimensions (LxWxH ): 900 x 700 x 1800 mm Weight: approx. 350 kg Electrical connection: 3 x 400 V, 4 kW Compressed air connection: 6 - 8 bar Noise level: > 85 dB(A) spindle diameter: 35 mm Belt grinding unit for grinding belts max. 150 mm x 3500 mm length with pneumatic belt tensioning, belt tear control, 4 kW drive power, frequency controlled, for contact wheels max. DM 350 mm x 150 mm, drive and deflection rollers With top roller for free belt grinding

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 50 h, A gantry system for automated loading or transport of heavy parts is for sale. This gantry system can be used for various loading applications (milling machines, lathes, paint lines, welding units, etc.). X travel – 11.6 meters, Y travel – 2.38 meters, Z travel – 2.5 meters. Iijdpfjwdnb Dex Ag Uec All axes are driven by SEW servo motors. Servo-driven single gripper for parts up to 500 kg. Control cabinet – PLC control – Siemens S7-1500 and SEW drives. The gantry system can be inspected by appointment in Overath.

Year of construction: 2022, condition: new, machine/vehicle number: RPM500_OSZ2, Robot - polishing machine RPM500_OSZ2 Oscillation (50 mm) and delivery (100 mm) Polishing discs DM - 1000 mm Power - 4 kW Extraction support - 100 mm Iiodpfx Agod Dt D Io Usc There are two piece

Condition: good (used), Used rotary indexing table polishing machine Manufacturer: Hau Rotary indexing table with 6 work spindles and 3 polishing stations with oscillation and high-pressure guns, Iodpoqmfv Sofx Ag Uoic 5.5 kW motors, gripper clamping system, switch cabinet