Used Dosing Machine With Cv Technology for sale (86,352)

Condition: used, Year of construction: 1997, Haas VF-2 CNC Vertical Machining Centre with Haas Control. S/No. 10064 (04/1997), Table size 915mm x 355mm, 20 Tool ATC, BT40 Spindle Taper Location: These lots are located in Andover, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Kdodpjzy N H Dsfx Aa Ret

Condition: used, Richards PRT 2N Type Horizontal Boring Machine with Mitutoyo 3 Axis DRO (KL-Counter), Main Table size 1020mm x 760mm, Sub Table size 910mm x 910mm, Variable Height Centre, Speeds 160 - 500rpm, Bed length 1980mm to Centre, Z Axis Travel 1000mm Location: These lots are located in Andover, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Kedpfezy Rbvex Aa Rodt

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, overall weight: 12,000 kg, input voltage: 415 V, input current: 70 A, input frequency: 50 Hz, Complete 2010 Rademaker Pie Line, capable of producing up to 5,280 filled savoury pies (with lids) per hour. Manufacturer - Rademaker B.V. Maximum mechanical speed – up to 22 strokes / minute. Output capacity – up to 5,280 pies / hour. Electrical requirements – 415 V / 50 hz / 3 phase. Power – 70 Amps (approx.). Weight of complete line – 12,000 kg. This production line comprises of the following equipment/machinery: 1. 2 x sets of tooling complete with trollies, one set for pies with casing diameter of 110mm. 2. Electrical control panel (with data plate ‘PIE LINE’ on). 3. Inclined flighted conveyor for loading of pastry sheets. 4. Overhead transfer conveyor (used to feed 'STRIPFEEDER') operating at 2.4m high along the length of the line. 5. Rademaker ‘STRIPFEEDER’ with denester for dropping pie cases. 6. Rademaker Tamping unit 1 (used to tamp the dough round into the pie casing). 7. Rademaker ‘DEPOSITOR’ 6-lane depositing system with hopper and pump. 8. Rademaker ‘TAMPING UNIT’ 2 for tamping filling down into casings. 9. Rademaker ‘LID DOUGH CONVEYOR’ for dropping lids onto filled pies. 10. Dutch Thermal Engineering b.v. (DTE) V-009.0 thermostat for regulating temperature of water bath sat under main conveyor holding pie casings. 11. Rademaker Crimping unit / marking unit for putting pattern into casing lid and ensuring it is secured onto pie. 12. Rademaker Pie exit/discharge conveyor. 13. Rademaker ‘DOUGH RETURN SYSTEM’ for excess pastry. 14. Rademaker ‘SPOT DEPOSITOR’ for 5-across over line depositing. 15. Unnamed egg-glaze mixing vessel and pump, mounted on mobile frame. NOTES – BUYER TO REMOVE FROM SITE. Kodpszvmy Hofx Aa Rjdt

Condition: used, machine/vehicle number: 005583, X axis working area: 3680 mm Y axis working area: 2040 mm Working Table: Flat table Main Electrospindle power: 13 KW Number of controlled axes: 3 axes Kdedpfx Astwgirea Ret Total number of drilling spindles: 11 Total number of tool changer positions: 12

Condition: used, machine/vehicle number: 008388, X axis working area: 3086 mm Kjdpfeyngzvex Aa Redt Y axis working area: 2185 mm Working Table: Flat table Main Electrospindle power: 15 KW Number of controlled axes: 4 axes Total number of drilling spindles: 18 Total number of tool changer positions: 20

Condition: used, Year of construction: 2005, total height: 2,500 mm, total length: 7,500 mm, total width: 3,700 mm, Colour: Grey Empty weight: 9.600 kg Price: On request - Year: 2005 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Drive system: CNC - Horizontal/vertical: vertical - Control system brand: Siemens - Power [kW]: 24.0 - Number of axes [pcs]: 4 - X-axis travel [mm]: 2000 - Y-axis travel [mm]: 500 - Z-axis travel [mm]: 550 - C-axis rotation [°]: 360 - Table length [mm]: 2600 - Table width [mm]: 550 - Tool holder: ISO40 - Main spindle power [kW]: 22 - Min. spindle speed [rpm]: 20 - Max. spindle speed [rpm]: 12000 - Positioning accuracy [mm]: 0.01 - Travel speed [mm/s]: 667 - Options: Tool magazine, Chip conveyor, External cooling - Transport dimensions: 7500mm x 3700mm x 2500mm (l x w x h) - Transport weight [kg]: 9600kg - Transport packages [pcs.]: 2 Ksdpfx Aajzkudcj Redt Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: like new (used), Year of construction: 2019, tube diameter 28 mm wall strength 2 mm Ksdpfx Aasxcuhrj Rodt bending radius min. 90 mm control 3D TubeSoft Slim total power requirement 3,5 kW

Condition: new, Year of construction: 2025, tube diameter 48,3 mm wall strength 3,25 mm bending radius min. max. 180 mm Bending speed 20 °/sec total power requirement 2,4 kW weight of the machine ca. 700 t dimensions of the machine ca. 3880 x 800 x 1250 m Kdodoxcuicepfx Aa Rjt Description: Round tube steel (S235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Square tube steel: 50 x 50 x 4.0 mm Rectangular tube steel: 60 x 40 x 2.0 mm max. usable length: 3048 mm Bending speed: 10°/sec including tools (see photos) Mandrel is no longer available, can be retrofitted

Condition: new, thread dia. M6 - M36 turning speeds 30 - 150 U/min working area max. 1200 R angle adjustable from - to 0 - 90 Grad voltage 230 V engine output 1200 W weight 65,0 kg - Includes quick-change chuck - for use with taps - for through holes and blind holes - Swivel motor unit for thread cutting - at any desired angle between 0° and 90° - Higher accuracy compared to manual thread cutting Kjdsxab Eljpfx Aa Redt - Thread is guaranteed to be right-angled (90°) - High productivity - significant time savings compared to manual thread cutting - Quick-change chuck with integrated slip clutch - Includes swivel arm with large radius - for easy positioning of the tap on the workpiece - Highly economical due to low investment and maintenance costs - For thread cutting in steel, stainless steel, aluminum and non-ferrous metals Scope of delivery - Operation via touchscreen - Digital drilling depth display - Quick-change holder according to DIN - Quick-change chuck - Electric motor - 90° angle adjustment - Mounting flange Special accessories included: - BERNARDO base frame with 2 drawers * milled support surface 900 x 600 mm * including 3 T-slots (16 mm) * large storage space and 2 drawers for storing tools * 4x swivel castors including parking brake - Mounts according to DIN 376: * M5-6 / M8 / M10 / M12 / M14 / M16 / M18 / M20 / M22-24 / M27 / M30 / M33 / M36

Condition: new, bore capacity in steel (diameter) 40.0 mm bore capacity in cast iron 50.0 mm throat 300 mm bore stroke 160 mm morse taper 4 MK table: 615 x 430 mm threading 24 in ST M threading 30 in GG M turning speeds 100 - 1.800 U/min feed 0.1-0.2-0.3-0.4 mm/U distance spindle /table 147 / 688 mm total power requirement 0.6 / 1.8 kW weight 470 kg height of the machine 1865 m Furnishing: - Electromagnetic feed clutch - with overload protection and electrical cross-handle switch - Lockable main switch - Motor protection switch - Mushroom pushbutton (latching) for EMERGENCY STOP, in the front panel - Infinitely variable speed adjustment - Digital speed display - Protection class IP 54 - Spindle protection with electrical fuse - Motor insulation class "F" (155 degrees) - Operating instructions in German including special equipment: - LED machine light pos. 12. - Thread cutting device pos. 20.0 (Thread cutting with stop) - Coolant device "A" pos. 24. (Coolant base plate, complete) - digital drilling depth display pos. 37.1 (5-digit LED display) Kedpfsxaa R Hsx Aa Rjdt

Condition: used, Year of construction: 2000, sheet width 3020 mm plate thickness 5 mm distance between columns 3020 mm Control Simatec OP7 stroke 450 mm back stop - adjustable 2000 mm work height max. 900 mm total power requirement 22 kW weight of the machine ca. 9000 kg dimensions of the machine ca. 4200 x 1600/2900 x 2000 mm Features: Kedpfjyk Dicox Aa Rodt - Motorized rear stop, 1000 mm - Hydraulic upper beam adjustment - Motorized lower beam adjustment - Hydraulic tool clamping - Side guard - Foot switch - Operator's manual

Condition: new, bore capacity in steel (diameter) 50 mm bore capacity in cast iron (diameter) 60 mm threading cutting capacity: M42 throat 360 mm bore stroke 200 mm spindle taper MK 4 Kedpfx Aasn Ea Twe Rsdt feed range - spindle 0,1-0,2-0,3-0,4 mm/U spindle turning speed range 190 - 1900 U/min column diameter 175 mm table surface area 550 x 550 mm total power requirement 4 kW weight of the machine ca. 0,85 t dimensions of the machine ca. 2,2 x 0,7 x 1,3 m - large stepless speed range in 3 stages - mechanical speed adjustment with hand lever (model V) - electronic speed adjustment with frequency converter (model VE) - Front digital speed display - Gear lubrication by automatic oil pump “VE” - Machine base plate with integrated coolant device - Machine light - MGI rotating and tilting table - Advance and automatic retraction with electromagnetic clutch - Front hand wheel for fine adjustment of the manual feed - Scale with adjustable drilling depth - Automatic feed reversal when threading - automatic tool ejector - Electric controls integrated in the drill head - EMERGENCY STOP button - Switch for forward/reverse rotation - Height-adjustable chip protection disc with micro switch - CE marking

Condition: new, width of the strips 150 mm band length 2280 mm band speed 22 m/sec table-size 700 x 350 mm roll diameter 140 / 80 mm Kdodpfoppgdzjx Aa Rjt motor speeds: 2880 1/min range L-W-H 1300 x 800 x 1500 mm total power requirement 3,0 kW weight of the machine ca. 250 kg Horizontal belt grinder - Small, flexible all-rounder - Solid gray cast iron unit - long-lasting, good grinding results - Motorized tape oscillation approx. 10mm - Pneumatic belt tension - Small table on the pulley for grinding radii and shapes - The entire sanding belt can be used thanks to the height-adjustable work table - Including angle and miter fence Special equipment: - swiveling grinding unit 90 - 135 degrees - Support table on the pulley

Condition: new, plate thickness max. 5.0 mm tube diameter 27.9 - 61.0 mm motor 400 Volt total power requirement 2.2 kW weight of the machine ca. 93.0 kg. The AL1-2U electric pipe notcher is started at the push of a button, and the pipe notcher is driven continuously. This means you can continually work on new parts without having to switch the machine on again each time. With the electrically driven AL1-2U pipe notcher you can notch pipe outer diameters of Ø 26.9 (3/4?), Ø 33.7 (1?), Ø 42.4 (1 ¼"), Ø 48.3 (1 ½"), Ø 60.3 (2?). This pipe notcher is also suitable for notching a zinc outlet in round and rectangular metal pipes. You can notch pipe outer diameters of ø 20.0 -60.3. Do you often notch pipes? Then the electrically driven pipe notcher AL1-2U with the 2.2 kW electric motor is just the thing for you. The motor forms a unit with the special eccentric shaft that drives the notching tool. The motor is also equipped with an on/off switch with 0-voltage protection and a protective cap. Kedpfx Aoxaadmoa Rjdt Equipment: - electro-motor pipe notching machine - including notching station for zinc run-out notches - for pipes 27.9 - 34.8 - 42.8 - 49.0 and 61.0 mm - operating instructions

Condition: used, bore capacity in steel (diameter) 45 mm throat 350 mm bore stroke 180 mm 4 speeds 30 - 765 U/min table-size 720 x 560 mm total power requirement 3,4 kW weight 950 kg Kjdpfx Asvuz Tvsa Rjdt dimensions 1200 x 800 x 2300 mm Features: - Automatic feed - Coolant system - Infinitely variable speed control - Adjustable fixed depth stop - Emergency stop foot switch - Drill chuck

Condition: new, work piece width max 145 x 150 mm band speed 1.0 - 8.0 m/min workpiece height max. 100 mm total power requirement ca. 5.5 kW weight of the machine ca. 900 kg. dimensions of the machine ca. 1560 x 870 x 1920 mm Wide-Band Sander for Deburring and Rounding of Laser-Cut Parts - Includes Vacuum Work Table Description Technical Specifications: - Working width: 150 mm - Maximum workpiece height: 100 mm - Max. height adjustment: 100 mm - Complete finishing in a single pass - 1 grinding wheel - 2 disc brushes - Pressure rollers in front of and behind each unit - Adjustable feed speed - Fixed table, constant feed height - Vacuum table - Pressure of the brushes and grinding wheels adjustable . without opening the hood INCLUDED: DD UNIT: GRINDING WHEEL FOR DEBURRING - Working width: 150 mm - Motor power: 1.1 kW - Grinding wheel diameter: 250 mm INCLUDED: 2PTB UNIT: DISC BRUSHES FOR EDGE ROUNDING - Unit for rounding the edges of laser-cut parts - Adjustable speed of the disc brushes - 1 brush rotates clockwise - 1 brush rotates counterclockwise - Brush diameter: 250 mm - Motor power: 2 x 1.1 kW INCLUDED CONVEYOR BELT - The conveyor belt is made of synthetic rubber - The belt has high adhesive strength to hold parts in place - The conveyor belt is oil- and spark-resistant - Transport speed: 1-8 m/min. INCLUDED VACUUM TABLE FOR SECURING SMALL PARTS - Installed as standard - Vacuum motor power: 2.2 kW - Minimum workpiece dimensions: 25 x 25 mm - Maximum workpiece dimensions: 145 x 150 mm GENERAL INFORMATION: - Mechanical measurement of workpiece thickness - Digital display of material thickness - Pressure rollers are spring-mounted Kdsdozwxy Iepfx Aa Rot - Fixed working height

Condition: new, Model Name Anfassystem B22 ZERO Kedpfx Aask Au Dvs Rjdt

Condition: new, Model Name Kdsdpsk D Nyijfx Aa Rjt Anfassystem UZ12 ULTRALIGHT

Condition: like new (used), Year of construction: 2023, turning diameter 620 mm turning length 1500 mm control Siemens 808D spindle bore 100 mm turning diameter over slide 420 mm spindle turning speed range 10 - 4000 U/min main drive 41 kW rapid traverse speed 10000 mm/min total power requirement 65 kW weight of the machine ca. 9 t dimensions of the machine ca. 6,4 x 3,0 x 2,5 m Control unit CNC Siemens 808D new Drives/Servomotores, 24 month warranty on equipment - Chip Conveyor - Tool cooling system - Tailstock - Tool changer (Tower) with 8 positions Ksdpfx Aaelar N No Rsdt OPTIONAL INCLUDED - - piece support (Lunete)

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, overall weight: 600 kg, plate width: 60 mm, plate length: 80 mm, resolution (max.): 2,540 dpi, TECHNICAL DETAILS Exposure method: Direct laser exposure (computer-to-screen) Resolution: up to 2,540 dpi Maximum screen size: 600 × 800 mm Suitable for: common CTS emulsions Plate width: 60 mm Plate length: 80 mm Kdsdpfxozy Into Aa Rst MACHINE DETAILS Input voltage: 240 V Dimensions & Weight Dimensions (L x W x H): 1,670 x 820 x 930 mm Total weight: 600 kg EQUIPMENT Computer Keyboard Monitor Mouse Machine software with configuration and adjustment options Accessories and maintenance tools

Condition: new, bore capacity in steel (diameter) 40.0 mm throat 293 mm bore stroke 120 mm morse taper 3 MK table: 515 x 360 mm turning speeds 160 - 2250 U/min column diameter 115 mm feed 0.10 + 0.20 mm/U distance spindle /table 117 / 701 mm total power requirement 1.45 / 1.90 kW weight 285 kg range L-W-H 500 x 800 x 1840 mm Furnishing: - autom. Feed 0.10 + 0.20 mm / rev - stepless speed adjustment - Short spindle MK 3 - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for clockwise and counterclockwise rotation - Digital speed display - Feed overload protection Kedsxaakaepfx Aa Redt - Spindle protection with electrical fuse - 2 m cable with plug 16A - Operating instructions in German including special equipment: - Coolant device "B" pos. 25.

Condition: used, machine/vehicle number: 008594, X axis working area: 3100 mm Y axis working area: 2200 mm Working Table: Flat table Main Electrospindle power: 8.5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 18 Kdjdezvwqvopfx Aa Rst Total number of tool changer positions: 20

Condition: excellent (used), Year of construction: 2021, Efi Vutek H5 Under service contract since installation in 2021. Configuration: 8 colors + w For extra 9.000€ extra we can include RIP Caldera V18 with driver and profiles and 100 liters of inks, 20 liters per colours CMYKW . (which costs 14.000€) Kjdpfx Aaoxanwze Rjdt Productivity: 109 boards per hour Under production. Price includes decommissioning and loading on truck. Pictures and videos available upon request. For further technical information, please refer to enclosed brochure.

Condition: excellent (used), Year of construction: 2020, HP R2000 Very good status, in production. Year: 2020 Mileage: 45.000m² only Options: edge holders View video for extensive presentation For further technical information please refer to attached brochure The HP Latex R2000 is a high-productivity hybrid large-format printer designed for both rigid and flexible media. It uses HP Latex water-based inks, including white ink, to produce durable, high-quality prints for signage, displays, packaging prototypes, vehicle graphics, and interior décor applications. With the ability to print directly onto rigid boards as well as roll-fed materials, the R2000 combines versatility, vibrant color output, and environmental benefits in a single production system. Specification Value Print technology HP Latex water-based inks Maximum print width 2.49 m (98 in) Printer type Hybrid: rigid flatbed + roll-to-roll Maximum print resolution 1200 × 1200 dpi Ink colors 9 channels: C, M, Y, K, Light C, Light M, Optimizer, Overcoat, White Printheads 8 printheads Ink capacity 5 L (colors/optimizer/overcoat), 3 L (white) Maximum rigid media thickness 50.8 mm (2 in) Maximum roll weight 100 kg Maximum roll diameter 250 mm Connectivity Gigabit Ethernet Printer dimensions 5.10 × 2.04 × 1.75 m Dimensions with tables 5.10 × 3.64 × 1.75 m Weight 1,600 kg Operating temperature 15–30 °C Operating humidity 20–70% RH Power consumption 8–11 kW during printing Warranty (original) 180-day limited hardware warranty Print Speeds Mode Speed Outdoor (3-pass, 70%) Up to 86 m²/hr Indoor Production (6-pass, 110%) Up to 43 m²/hr Indoor High Quality (12-pass, 120%) Up to 22 m²/hr White Spot Up to 36 m²/hr White Overflood/Underflood Up to 16 m²/hr Day & Night (3 layers) Up to 5.2 m²/hr Supported Materials Rigid substrates Foam board PVC foam Corrugated plastic Acrylic Polycarbonate Polystyrene Corrugated cardboard Honeycomb board Aluminum composite panels Wood Kdodpfx Aaszdtuao Ret Glass Ceramic Flexible substrates Vinyl banners Self-adhesive vinyl Coated papers Polypropylene Polyester Canvas Textile (non-porous) Leather Typical Applications Retail signage Backlit displays Vehicle graphics and wraps Wall coverings Window decoration Packaging prototypes Corrugated displays Textile graphics and soft signage

Condition: used, Year of construction: 1963, total height: 1,850 mm, total width: 800 mm, total length: 3,900 mm, Empty weight: 3.000 kg Price: On request Stroke: 1500mm Capacity: 10t - Year: 1963 - Documentation available: Yes - CE certificate present: No - Drive system: Conventional - Power [kW]: 7.5 - Transport dimensions: 3900mm x 800mm x 1850mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 2 Kdedpfey Auy Rsx Aa Rst Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum