Used Edel Punching Machine for sale (65,007)

Condition: new, tube diameter 1/4" max. 2" Zoll wall strength max. 3,0 mm engine 400Volt / 1,5KW weight 90 kg dimensions 07 x 0,4 x 0,3 m Pipe notcher Hnodpfxjv Skzke Af Hop Maximum wall thickness 3.0 mm Suitable for the following pipes: 1/4", 1/2", 3/4", 1", 1 1/4", 1 1/2", 2"

Condition: used, sheet width 750 mm plate length 1250 mm Hodpfxsxfb Hmj Af Hsnp plate thickness 4 mm table surface area 1600 x 1050 mm no. of strokes 180 Hub/min max. punching diameter 105 mm punching pressure 25 t total power requirement 4,0 kW weight of the machine ca. 1,8 t dimensions 1,9 x 1,9 x 1,7 m Punching and nibbling machine - Digital readout for X and Y axis - Tool cabinet with tools

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3 h, functionality: fully functional, pressing force: 20 t, working width: 1,250 mm, travel distance Y-axis: 1,270 mm, sheet thickness (max.): 6 mm, working length: 1,250 mm, No minimum price – guaranteed sale to the highest bidder! Machine from a training workshop with only 3 hours of punching time! Submission of a bid obligates timely collection by 21/11/2025! TECHNICAL DETAILS Pressing force: 200 kN Maximum sheet thickness: 6 mm Hnodpfx Aoxn Rvief Hsp Turret stations: 51 Auto-index stations: 4 Y-axis travel: 1,270 mm Working area: 1,250 x 1,250 mm MACHINE DETAILS Control system: AMNC-F Weight: 12,500 kg Electrical data Full load current: 55 A Short-circuit current: 25 kA Power consumption: 19 kVA Nominal voltage: 200 V Frequency: 50 Hz Operating hours Punching time: 3 h Power-on time: 895 h EQUIPMENT Solution Pack Blank School offline software AP100 2D CAD Production Designer 3D VPSS3i Blank Tooling package valued at EUR 8,000

Condition: used, functionality: fully functional, --Punching machine Omes CH85 XS WORKING IN GOOD CONDITION. YEAR 1995. DIMENSIONS: 190X80X185 cm (h), 2100 KG --Punching machine Omes CH70 WORKING IN GOOD CONDITION. DIMENSIONS: 170X80X190 cm (h), 1700 KG Hnsdpfjwn Hygox Af Hop

Condition: used, functionality: fully functional, PUNCHING MACHINE FICEP 604 N -Machine dimensions mm approx. 150x65X220 (H) cm, Weight kg 1500 Hnedpfx Afswn Hyte Hop -Power supply voltage 380 V 50 H -Motor power kW 7.5 -Punching force ton 60 -Max. hole of 32 mm executable on a thickness of mm 16 -Max. diameter with large hole equipment (optional) mm 100 -Working height mm 950 -Punch stroke mm From 0 to 40

Condition: used, functionality: fully functional, ---IMS PHY 1100 PUNCHING MACHINE, YEAR 2008, MAX PUNCHING 32X26 mm. Overall dimensions 185X75X210(h) cm, Machine weight 1800 kg ---IMS HY 45 VS PUNCHING MACHINE YEAR 2005 Hydraulic single punch Power 45 ton 5 work stations (slotting, angular cutting, bar cutting, shearing) Punching diameter 32 mm X 12 mm Slotting 50X40 x 6 mm 90 degree angular cutting 80 mm X 80 mm X 8 mm Hjdpfx Afjwn Hu Ro Hsnp Plates 300 mm X11 mm Swan neck 170 mm Controlled or free descent Self-moving extractor Adjustment of punch upper dead point Check squares Motor power 4 kW Overall dimensions 100X60X180(h) cm, Machine weight 500 kg

Condition: used, functionality: fully functional, PUNCHING MACHINE CORI C30/76P RM2 POS, YEAR 1195, POWER: 30 TON, RECESS: 760 mm. DIMENSIONS: 278X178X193(h) cm. WEIGHT: 4400 KG Hnodpfx Afswn Hv Ij Hjp

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2022, operating hours: 60 h, +++ Demo machine, approx. 60 operating hours +++ +++ Descending Die +++ Basic machine: TruPunch 3000 large format (S20) Machine: - Box frame - Hybrid axis system - Linear tool magazine with 24 stations for clamps and tools - Hydraulic clamps (3x) - Drives with maintenance-free three-phase motors - Repositioning with programmable presser foot - Foot switch to close clamps - Part chute, right - Part removal flap, left - Sensor for part removal flap - SortMaster Compact retrofit-prepared Punching head: - Delta Drive - Rotating single-station tool adapter - Programmable presser foot position - Tool length compensation - Punch spray lubrication - Punching slug vacuum - Forming function - Punch stroke counter Control: - TRUMPF control based on Rexroth IndraMotion MTX - Touch panel with 19" TFT color display - Touchpoint - Auto-shutdown - Remote support interface - Program manager - Production plan Data transmission: - Central Link - Online Update Manager Safety: - CE marking and EC Machinery Directive - Double-beam safety light barrier Advanced standard configuration: - First index pin (inside right) - Ball tables Hedpfjxmfc Uex Af Henp - Part chute for finished part container - Chip container to rear for removal Advanced machine and punching features: - MultiTool function - MultiShear function - MultiBend function - Tapping function with thread counter - Forming tap breakage control - Lubricant level monitoring - Unlimited time license - Marking/Quick beading function (option) - Engraving function - Deburring and roller technology function - Adaptive stroke calibration - StripLine - Die spray lubrication with fill level monitoring - Descending Die - Integrated flattening function - Smart punch monitoring - Additional clamp - Height-adjustable clamp - Vibration damping - Chip container removed to front - Brush tables with loading and unloading assistance - Warped sheet detection Technical data TruPunch 3000 large format (S20) Dimensions / Weight: Width: 7644 mm Depth: 7666 mm Height: 2200 mm Weight (fully equipped): 13,800 kg Control / Hardware / Electrics: Hard disk type: SSD Number and size of hard disks: 2 x 120 GB Customer program memory: 10 GB Display: Touchscreen Display size: 21.5 in Interfaces: USB Network: RJ45 Control type: Bosch CML75 Operating system: Windows 10 IoT Axis data: X/Y/C axis drive: NC-controlled, maintenance-free three-phase servo motors Punching head drive: Electric Max. X axis speed: 90 m/min Max. Y axis speed: 60 m/min Max. simultaneous axis speed: 108 m/min Max. C axis speed (punching): 350 rpm Max. C axis speed (tapping): 350 rpm Max. punching stroke rate (E=1mm): 690 1/min Max. marking stroke rate: 1000 1/min Accuracy — positioning deviation Pa: +/- 0.1 mm Accuracy — position range Ps: +/- 0.03 mm Smallest programmable increment: 0.001 mm Working range / Workpiece size: Max. sheet thickness: 6.4 mm Max. workpiece weight: 230 kg X axis working range: 3000 mm Y axis working range: 1550 mm Punch-specific data: Max. punching force: 180 kN Max. presser foot force: 20 kN Max. tool size, punching (outer diameter): 76.2 mm Max. tool size, forming (outer diameter): 101.6 mm

Condition: used, 5-way combination profile steel shear, PEDDINGHAUS Type 210 AD/13 Machine No. 529A059, Year of manufacture approx. 1970 Punching unit: Punching force 60 tons Punch stroke 25.5 mm Punching capacity Ø 25 mm in 16 mm sheet metal Ø 20 mm in 19 mm sheet metal Overhang 365 mm Hnjdpfx Aoi Duh Ief Hsp Round bar shear: Cutting capacity, round 42 mm Square 38 x 38 mm Flat bar shear: Cutting capacity at shear angle 5° 150 x 13 mm or 200 x 10 mm Blade length 245 mm Profile steel shear: Shearing capacity, angle iron at 90° 110 x 10 mm Shearing capacity, angle iron at 45° 90 x 9 mm T-steel 110 x 10 mm Notching device: Rectangular notching up to 12 mm sheet metal Punch dimensions 85 x 50 mm Motor power 3 kW Mains connection 380 Volt, 50 Hz - Center-finding device via hand lever and centering device - Mechanical stroke release via hand lever - Flat bar shear equipped with 2° blade - Mechanical clamp on the profile steel shear, round bar shear and on the flat bar shear Space requirement L x W x H 1500 x 800 x 1900 mm Weight 2000 kg Good condition

Condition: used, Pneumatic press, compressed air press BOSCH Type Manufacturer’s No. Year of manufacture 1980 Pressing force: 18 kN = 1.8 tons at 5 bar 15 kN = 1.5 tons at 4 bar 12 kN = 1.2 tons at 3 bar Hnedpfx Afjh U Dtuo Hjp 8 kN = 0.8 tons at 2 bar 6 kN = 0.6 tons at 1.8 bar Overhang: 100 mm Ram stroke: 70 mm Table surface: 245 x 200 Ram surface: Ø 45 mm Maximum installation height: 235 mm Arbor hole: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force can be continuously adjusted via a pressure regulator - Pneumatic cylinder with ram, height adjustable by 90 mm - Pneumatic two-hand operation - Mounted on a metal frame with wooden plates Space requirement L x W x H: 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight with table frame: 140 kg In good condition

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 280022, Schüco profile punching tool for facade series FWS50 and FWS60 with base frame Hedjy R D Akepfx Af Hjnp

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, machine/vehicle number: 9174, total height: 3,400 mm, ram adjustment: 100 mm, installation height: 530 mm, total width: 2,150 mm, total length: 1,450 mm, pressing force: 100 t, clearance between the columns: 830 mm, overall weight: 15,000 kg, DGUV certified until: 01/2027, year of last overhaul: 2026, punching force: 100 t, The machine is completely overhauled and finished, including new Siemens S1500/MTP1000 press control. Hsdox U Ucpspfx Af Honp Upright spacing: 830 mm Distance table to ram: 530 mm Stroke adjustment: 10 - 120 mm Ram adjustment: 100 mm Ram strokes/minute: 30-120 Delivery time: immediately Price on request

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, machine/vehicle number: 9012, total height: 4,200 mm, ram adjustment: 100 mm, installation height: 630 mm, total width: 5,100 mm, total length: 2,000 mm, pressing force: 400 t, clearance between the columns: 3,000 mm, overall weight: 65,000 kg, DGUV certified until: 01/2027, year of last overhaul: 2026, punching force: 400 t, The machine is partially overhauled and completed. The control system is built according to customer specifications (Siemens control). Column spacing: 3000 mm Stroke adjustment: 20 - 80 mm Ram adjustment: 100 mm Distance table - ram: 630 mm Ram strokes per minute: 100 Hjdpex U Ur Rofx Af Hsnp Delivery time approx. 3 - 4 months after design of the new control system based on the customer's specific requirements. Price on request.

Condition: excellent (used), Year of construction: 2007, Pressing force: 2,000 kN Table size: 2,300 x 1,100 mm (W x D) Pass-through opening: 2 pcs. 700 x 300 mm Distance between uprights: 2,460 mm Ram clamping area: 2,300 x 1,100 mm Lateral clearance: 740 mm Die height: 550 mm (ram down, adjustment up) Stroke rate: 30 - 140 strokes/min, steplessly adjustable Stroke: 20...220 mm Ram adjustment: 150 mm (motorized) Main drive: 30 kW Weight: approx. 27,500 kg Features: • Siemens + Beckhoff control • 8-fold slide guide • Motorized oil circulation lubrication • Automatic ram adjustment • Hydraulic overload protection • Pneumatic ram counterbalance • Electromechanical stroke adjustment • Siemens + Beckhoff control system • Beckhoff panel visualization • T-slots in table and ram (28 mm, spacing 300 mm) • Vibration-damping machine feet • 4 pcs. tool safeties + 4 pcs. cam outputs • Ram with 20 mm wide central slot • Hydraulic tool clamping on table and ram • Hydraulic roll blocks for tool change Coil line by Kemmerich, consisting of: Decoiler Type: V 5000 A – SH – 600 - S Load capacity: 5,000 kg Coil width: 100 - 600 mm Expansion range: 470 – 520 mm Coil outside diameter: 2,000 mm • Motorized auxiliary drive • Pneumatic disc brake • Hydraulic expansion by wedge segments • Rear support disc and 3 attachable limiting arms at front • Hydraulically actuated and driven hold-down roller, laterally adjustable by handwheel • Load carriage (stationary, decoiler moves hydraulically), lifting height 770 mm with 4 limiting bars Straightening machine Type: RMBMZ 50.600 UF Coil width: 40 - 600 mm Coil thickness: 0.5 – 4.0 mm Max. cross-section: 1,200 mm² Number of rollers: 9 pcs. Roller diameter: 50 mm Number of feed rollers: 2 pcs. Feed roller diameter: 100 mm Speed: 3 - 25 m/min Features: • Rollers hardened, ground and hard chromed • Drive of lower straightening rollers and feed rollers via gear transmission • Motorized roller frame adjustment, precision 1/100 mm, settings storable • Upper rollers ventable by 100 mm • Feed roller pneumatically ventable • Lateral strip guidance at entry with handwheel and leadscrew • Outlet roller basket and loop bridge • Loop control via ultrasonic sensor • Hydraulic introduction aid, consisting of table with extendable tongue and upper bending roller Roll feed Coil width: max. 600 mm Features: • Rollers hardened, ground, and chromed • Driven by gear motor • Upper roller hydraulically ventable • Height adjustment hydraulic • Lateral strip guidance at entry with handwheel • Roller basket Additional features: • Pneumatically swiveling loop bridge between straightener and feeder • Safety fence around the entire line Hnjdpfx Ajv T Anljf Hep • Decoiler and straightener on common base frame • Various spare rollers for straightener The complete line can still be inspected under power at the current owner's site!

Condition: used, Manual Lever Corner Notcher BERNARDO Type AK100 Hnsdjyhq Aqjpfx Af Hop Manual Notching Machine Serial No. A17010320 Year of manufacture 2017 Blade length: 100 mm Material thickness at 40 kg/mm²: max. 3 mm Notching angle: 90° Stroke: 28 mm Table size: 380 x 280 mm - Adjustable stops - Lever arm length: 650 mm, 500 mm bolt-on extension missing Dimensions (L x W x H): 380 x 380 x 1000 mm (with 650 mm lever) Net weight: 90 kg Good condition

Year of construction: 1993, condition: ready for operation (used), A Trumpf punching machine still in operation, including a Trumalift loading and unloading unit that has not been used for a longer period, is available. 1) CNC punching machine Trumpf TruMatic 500, year of manufacture: 1993, max. punching force: 220kN, max. sheet thickness: 6.4mm, max. workpiece weight: 150kg, max. punching diameter: 76.2mm, simultaneous motion: 108m/min, stroke rate: 900/min, machine dimensions X/Y/Z: approx. 6700mm/5800mm/2200mm, weight: approx. 11000kg. 2) Trumpf Trumalift SheetMaster 1250 loading and unloading system, year of manufacture: 1993, max. sheet dimensions X/Y: 2500mm/1250mm, max. sheet thickness: approx. 8mm. Documentation available. An on-site inspection is possible. Hjdoyz Ap Rspfx Af Hsnp

Condition: good (used), functionality: fully functional, Year of construction: 2012, For sale: 1 piece used hole punch Hsdjuihvzopfx Af Henp Manufacturer: Geka type: Puma 110 2HI Punching force: 110t incl. documentation Dimensions see type plate Machine can be inspected in our warehouse in 09599 Freiberg.

Condition: ready for operation (used), Year of construction: 2000, operating hours: 34,744 h, functionality: fully functional, machine/vehicle number: 258 032, overall weight: 11,500 kg, punching force: 20 t, positioning accuracy: 0.07 mm, tool diameter: 89 mm, TECHNICAL DETAILS Machine capacity: 196 kN (20 t) Air pressure: 5 bar Hjdpsyn Nybefx Af Henp Air consumption: 250 Nl/min Oil capacity: 160 l Turret speed: 25 rpm Travel Ranges Machine travel range without repositioning: 1,250 mm x 2,000 mm Machine travel range with 1 repositioning: 1,250 mm x 4,000 mm Machine travel range with 1 repositioning and 1 turning: Turning not possible Processing Max. sheet thickness with ball table: 6 mm Max. sheet thickness with brush table: 3 mm Max. table load: 100 kg Precision Punching accuracy (in standard mode): ±0.1 mm Positioning accuracy (repeatability): ±0.07 mm Control and Axes Pneumatic clamping devices: 2 Number of simultaneously controlled axes: 3 (X, Y, C) Performance Strokes per minute, feed 25.4 mm: X320 / Y250 Nibbling work cycle, feed 1 mm: X920 / Y920 Tooling Minimum programmable increment: 0.01 mm Number of tools: 31 Max. tool diameter: 88.9 mm Amadex stations: 2 x 11 1/4" + 1 x 2" MACHINE DETAILS Connected load: 30 kVA Operating hours: 53,497 h Cutting hours: 37,808 h Dimensions & Weight Dimensions (L x W x H): 4,890 x 4,370 x 2,137 mm Machine weight: 11,500 kg Note: No tools included, special transport required.

Condition: ready for operation (used), Offered is a hydraulic punching machine: Punching force: 100tons (Tm), max. punching cross-section: 2350mm², punching capacity (standard): Ø50mm at 15mm material thickness, punching depth: 500-800mm, incl. special accessories: round punch: max. Ø80mm at 9mm, max. Ø100mm at 7.5mm, square punch: 50mm at 12mm, 60mm at 9.5mm, 70mm at 8mm, rectangular punch: max. 90 x 25mm at 10mm. Inspection possible by appointment. Hnodpfxjyzr Hlo Af Hop

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, operating hours: 55,582 h, machine/vehicle number: A0110A0058, controller model: BOSCH PNC-P, laser power: 2,000 W, number of slots in tool magazine: 21, TECHNICAL DETAILS Working area: 2500 x 1250 mm Max. sheet thickness: 4.0 mm Max. punching force: 165 kN Max. active stripper force: 9 kN Max. workpiece weight: 120 kg Max. part chute size: 300 x 500 mm Speeds X-axis: 90 m/min Y-axis: 60 m/min Simultaneous (X and Y): 108 m/min C-axis punching: 60 rpm C-axis thread forming: 180 rpm Max. punching strokes (F=1 mm): 600 strokes/min Max. marking strokes: 1300 strokes/min Tools Number of tool and clamp stations: 21 Tool change time Single tool: 4.4 s Multitool: 2.2 s Laser Data Guaranteed maximum output: 2000 W Laser model: TCF1 Power distribution: TEM∞ Beam quality² K (M²): 0.9 (1.1) Laser gas (CO₂, N₂, He, Xe, CO) consumption for cutting gas⁴: max. 1 cylinder premix gas p.a. Laser cutting head lens size: 5" MACHINE DETAILS Control model: BOSCH PNC-P Laser system switch-on hours: 25,582 h Electrical consumption (laser unit): 65 kVA EQUIPMENT Sturdy C-frame Coordinate guidance with integrated linear scale 2 workpiece clamps Maintenance-free three-phase servomotors Brush tables HI-LAS high-pressure cutting High-speed processing with SprintLas Programmable scan feed Quick-change cutting head system APC capacitive height control Lens monitoring sensors Laser logbook function Compact nesting table Rotating tool holder Automatic repositioning with stripper Automatic part chute Sliding part container Hjdpfx Afeyv Ddre Honp Spray lubrication for punch 2 lubricant containers Slug extraction Chip bin Hydraulic quick shut-off External control panel 15" TFT touchscreen color display USB stick interface 3.5" floppy disk drive Safety devices RJ45 network connection Network integration Comprehensive operating manual Remote diagnostics facility SPECIAL EQUIPMENT Thread forming function Softpunch function Vertically adjustable clamp Repositioning cylinder Vibration-damped installation Sensor for part chute Spray lubrication for die Brush-type loading/unloading assistance Note: The machine has already been dismantled (by a certified TRUMPF used machinery partner) and is ready for shipment.

Condition: excellent (used), Complete production line for sale for manufacturing round metal rainwater drainage systems. Production starts from a sheet metal coil, then forms, stamps, and packages the products. All machines are in very good condition. The equipment is fully assembled and intended for mass production of: Hnedpfjy I Tq Sox Af Hep - Gutters - Gutter ends - Connectors - Corners - Brackets - Downpipe outlets - Elbows - Downpipes - Branch connectors (Tees) - Packaging If you are interested in the offered equipment, have any questions, or would like to receive more detailed information, please do not hesitate to contact us. We will gladly provide the full equipment list, technical specifications, additional photos, or arrange an inspection of the production line. All equipment is connected and can be inspected in operation to see the full production process.

Condition: used, Year of construction: 1966, functionality: limited functionality, Automatic die-cutting machine, Bobst SPO 1575 EEG, ref. 2994 Year – 1966 Maximum sheet size – 1055 x 1575 mm Minimum sheet size – 400 x 600 mm Maximum mechanical speed – 4500 sheets/hour Maximum pressure – 350 t Vacuum feeder Hnodpey Hxw Iefx Af Hep Stripping unit Gripper-edge waste removal Batch delivery Sold as is, still in production Available from the end of July 2026 Price: only 12,000 EUR – must be sold as soon as possible.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, punching force: 28 t, sheet thickness steel (max.): 6 mm, input current: 35 A, Machine in perfect working order! Hnjderfww Njpfx Af Hop

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 292500 € 30 to 3000x1500 mm 3000 mm 1500 mm 70 m/Min 60 m/Min 120 m/Min 40 mm 1200 1/Min 325 1/Min 2800 1/Min 6 mm 3 mm 3 mm 1.5 mm 28 0,1 mm 0,05 mm 22 U/Min 150 U/Min 200 kg 940 mm 6 bar 88.9 mm 15 kW 180 l 6650 mm 7650 mm 6300 mm 8300 mm 2310 mm 18250 kg Control unit, Siemens Sinumerik 840 D SL CAD-CAM software Programming on the control panel Remote diagnostic function Automatic clamp positioning Network Ethernet communication Automatic tool lubrication UPS for control panel Movable scrap box Hedpfx Afsynna He Hjnp Brush table Oil Cooler USB Driver Command pedal Web cam for service Reposition on X axis Alignment Tools for Index Station D Manual nesting turret (27 stations without tool and holder): 11 x A-Station fix: 0,8-12,7 mm 11 x B-Station fix: 12,8 - 31,7 mm 2 x C-Station fix: 31,8 - 50,8 mm 1 x D-Station fix: 50,9 - 88,9 mm 3 x D-Station Index: 50,9 - 88,9 mm Infra-red light barriers according to CE rules PRICE FCA TÜRKIYE

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 249800 € 30 to Hnjdpfx Afjynnayo Hjp 2500x1250 mm 2500 mm 1250 mm 116 m/Min 80 m/Min 140 m/Min 40 mm 1200 1/Min 425 1/Min 3200 1/Min 6 mm 3 mm 3 mm 1.5 mm 27 0,1 mm 0,05 mm 22 U/Min 150 U/Min 120 kg 940 mm 6 bar 88.9 mm 15 kW 5750 mm 6800 mm 5360 mm 7360 mm 2310 mm 12960 kg Control unit, Siemens Sinumerik 840 D SL CAD-CAM software Programming on the control panel Remote diagnostic function Automatic clamp positioning Network Ethernet communication Automatic tool lubrication UPS for control panel Movable scrap box Brush table Oil Cooler USB Driver Command pedal Web cam for service Reposition on X axis Alignment Tools for Index Station D Manual nesting turret (27 stations without tool and holder): 11 x A-Station fix: 0,8-12,7 mm 11 x B-Station fix: 12,8 - 31,7 mm 2 x C-Station fix: 31,8 - 50,8 mm 1 x D-Station fix: 50,9 - 88,9 mm 3 x D-Station index: 50,9 - 88,9 mm Infra-red light barriers according to CE rules Price FCA Türkiye