Used Edge And Profile Grinding Machine for sale (72,696)

Condition: repair required (used), The TSCHUDIN HTG400 is available as a source of spare parts. Mechanically, the machine is in good condition. Electrically, the machine needs to be inspected and repaired. The drive motors are in good condition. The machine is being offered as a source of spare parts. Lodpfx Aasyt E Irszsrt

Condition: new, Year of construction: 2026, - Minor transport damage (small dent on the control cabinet, see photo) - Shaft diameter: 60 mm Lredpfoz Aiutox Aazot - The two lower rollers are adjusted hydraulically - Three rollers are driven - 2 digital displays - Brake motor - Can be used horizontally/vertically - Mobile control panel - Emergency stop - Documentation - 400V

Condition: good (used), Year of construction: 2004, Ref. -No.: 10629 Manufacturer: MICHAEL DECKEL Type: S20 Turbo Year of construction: 2004 Type of control: CNC-Steuerung Storage location: Halberstadt Country of origin: Germany Workpiece Diameter: 250 mm Max. Grinding length: 340 mm Max. Workpiece Weight: 50 kg Grinding wheel diameter (max.): 150 mm Turning Speeds: 8000 RPM Workpiece holder: SK 50 Further information: Ledpfozx Nynsx Aazert The machine can be viewed while powered up.

Condition: excellent (used), SCM internships in excellent condition Lredpet Hkq Rofx Aazot

Condition: used, Year of construction: 2002, x-travel 500 mm y-travel 300 mm w-axis 450 mm weight of the machine ca. 3,1 t Lsdpjzx Ha Ssfx Aazort Steuerung FANUC 16i-M Mit Erowa Wechsler Laufzeit 68.798h Lader nicht im Lieferumfang Feuerlöschanlage Papierbandfilter GAP-Control Maschine ab Standort Transportsicherung und Verladung zu Lasten des Käufers

Condition: used, grinding diameter 450 mm grinding length 1000 mm centre height 225 mm Fotos von bereits gelieferten Maschinen. Mechanische Überholung: -komplette Maschine nach Kellenberger Messprotokoll überholt -Neue servicefreundliche Kabine -Neulackierung Elektrische Überholung: -FANUC Steuerung mit BLUE-SOLUTION -Neu aufgebauter Schaltschrank -Neue Antriebstechnik -Austausch sämtlicher elektrischer Leitungen Berus Druckschalter etc. -Neue Absolut-Glasmaßstäbe in x- und z -Neuer Absolut Drehgeber (Bei-B-Achse) Fotos von bereits gelieferter Maschine mit anderen Optionen. Schleikopfvariante UR/RS: -Schleifscheibenanordnung für Aussen -und für Schrägeinstichschleifen hintereinander! -Dadurch jeweils 400mm Scheibendurchmesser! -Dadurch wesentlich geringere Kollisionsgefahr -Einfacheres programmieren -Schleifscheibenausrüstung jeweils 400x63x127mm Lodpjzkvucjfx Aazert -Einrichtung zum Betrieb einer HF-Spindel -Spindel optional gegen Aufpreis -B-Achse CNC gesteuert zum Aussen-Plan- und Innenschleifen in einer Aufspannung. Schwenkbereich +10°/-270° -C-Achse zum Polygonschleifen -Unterteil fest -Schleifkopfmotor 10,0 KW -Reitstock -Marposs Messsystem zur Schleifscheibenvermessung. -Längspositionierung Marposs

Condition: excellent (used), Cup grinding machine Swivel arm grinding machine Make Lomefa Type Unicum 8" YEAR OF MANUFACTURE 1980 grinding wheel diameter 200 mm Motor 380 Volt 1,84 kw Separate coolant tank in the machine base Transport dimension: L.850 mm W.800 mm H.1650 mm Weight 350 kg Lodpfeui S R Dox Aazort

Condition: used, Year of construction: 2011, Second-hand machine Year of manufacture: 2011 Condition: Machine fully overhauled and serviced Features and technical specifications: Feed speed: infinitely variable 10–18 m/min Edge Control 19 control system with 18.5-inch colour touchscreen Joint milling unit Edge feed Adhesive application station: Cartridge, feeler nozzle with automatic glue level adjustment Printing unit Trimming unit Multifunctional milling unit Copy milling unit Lredpfx Aaezk N Euezet Radius scraper unit Flat draw blade Polishing Workpiece thickness 6–60 mm Edge thickness 0.4–8 mm Min. workpiece width 60 mm Shortest workpiece length 180 mm Dimensions: 5300 x 1500 x 1600 mm Weight: 2,200 kg Location: 65439 Flörsheim Availability: at short notice

Condition: used, Year of construction: 2000, grinding diameter 500 mm grinding length 1000 mm centre height 250 mm -major maintenance -New table geometry -partial painting of the interior grinding wheel equipment LEFT 400x63x127mm (standard) grinding wheel equipment RIGHT 300x40x127mm Internal grinding unit Ø120mm for HF spindles CNC control KELCO 120 C-axis for non-circular grinding. Kel-Poly B-AXIS: CNC-controlled B-axis KELCO 120: v constant 35m/s or 45m/s High-frequency internal grinding spindle Operating unit for MFV and MFZ spindles Hydraulic quill retraction for the tailstock NO micro-adjustment on the tailstock Spring-loaded quill insert Top table cooling Standard workpiece headstock MK 5 DIN 55026 size 5" Micro-adjustment for the standard workhead Dressing device on the lower table Active longitudinal positioning KELPOS, MARPOSS, mounted on the grinding head Tool measuring system KELSET, MARPOSS Ljdpfx Aasxzk Nijzjrt MARPOSS gate sensor Measuring control MARPOSS Minialsar prepared Paper belt filter

Condition: used, *VILAR LASSEUR VL 315 GRINDER - 1992 - Carbide Tool Sharpening* French VILAR Chatellerault grinder, Type *VL 315* - No. *315.256* - Date: *06/29/92* *Complete equipment:* - Cross table with carriage + swivel table for workpieces - Universal, inclinable tool holder - Long arm for lathe tool holder / carriage tool - Diamond grinding wheel, housing, coolant system - Remote control box, emergency stop button Lredpfjzxt Hfjx Aazot - Articulated lighting lamp - Original green Vilar sheet metal base 400V - In working condition, from a precision engineering workshop On a pallet - Approx. 350 kg - Easy to transport Video available upon request.

Condition: new, Year of construction: 2026, Langmesser profile grinding machine, grinding area 1800 x 250 mm, spindle power 40 kW, with swivel magnet and clamping device, table scraper, automatic coolant nozzle adjustment, grinding wheel 500 x 150 x 203 mm, very powerful machine. We would be happy to send you further details. We look forward to receiving your grinding request. Delivery time for a new machine is approximately 9 months. Financing / leasing is no problem; we would be happy to provide you with a quote! Lrjdpfxeh H Strs Aazet

Condition: good (used), Here are the official specifications of your *BPR CP30* – 30mm spindle: It is a small but very versatile machine. Capabilities for mild steel: *Manufacturer's data for BPR / Eagle CP30:* - *Flat bar to flat bar:* 80 x 15 mm max - *Flat bar on edge:* 50 x 10 mm (to be verified, but standard on CP30) - *Round tube:* 60.3 mm x 2 mm (2-3/8" x .062") - *Square tube:* 38 mm x 3 mm (1-1/2" x .120") - *Round solid bar:* 30 mm max - *Square solid bar:* 30 mm also - *Gas pipe / Pipe:* 1"1/2 Sch 40, i.e. 48.3 mm - *U-channel:* 50 x 25 x 5 mm - *Angle iron:* 40 x 40 x 5 mm (external) / 35 x 35 x 5 mm (internal) d019775a *Technical specifications:* - Spindle diameter: 30 mm - 2 drive rollers (the lower 2) - Bending speed: 8.5 m/min Lsdpfx Aezwg Rzsazjrt - US speed: 12 feet/min - Weight: 210-247 kg depending on version (yours is 187 kg on the plate = older, lighter version) d019 In short, it is perfect for standard locksmithing/metalworking.

Condition: used, Year of construction: 2002, grinding diameter 250 mm grinding length 400 mm centre height 125 mm Control Fanuc 21i-T Maschine gewartet und teilüberholt. -Neue Schleifspindellagerung -Neue x-Achs Spindel -Obertisch überschliffen -Neue Geometrie Tischgeometrie -Neue Geometrie WSS zu Schleifspindeln Ledpfx Asvx Dvujazjrt B-Achse mit 1° Hirth Verzahnung Längspositionierung HF-Innenschleifspindel GAP Papierbandfilter

Condition: used, Year of construction: 1989, Second-hand machine Small machine for moulded part machining The machine processes hot-melt adhesive-coated edging material, which is reactivated using hot air The workpiece is automatically fed by pressing it against the central, driven pressure roller, which ensures uniform adhesive reactivation and thus reliable bonding Lrsdpezk N Ehjfx Aazjt Thermostatic temperature control via a dial thermostat Maintenance-free three-phase hot-air blower for continuous operation Automatic airflow deflection Pneumatically operated roller cutting device cuts even the toughest veneer and PVC edging Foot switch for moulded part processing Workpiece thickness 10–50 mm Heating capacity 3 kW Connected load 3.3 kW Workpiece width min. approx. 25 mm Edge thickness approx. 0.5–1 mm Minimum internal radius approx. 25 mm Feed rate 4 m/min. Pneumatic pressure 6 bar Weight approx. 105 kg Availability: at short notice Storage location: Röllbach

Year of construction: 2004, condition: used, Weight: 4.7t, automatic system operating hours: 41,411h, feed operating hours: 14,251h, an on-site inspection is possible. Ledpfxsz Da Nze Aazsrt

Condition: reconditioned (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 942, total length: 9,170 mm, total width: 1,635 mm, total height: 3,100 mm, overall weight: 4,140 kg, input current: 44 A, input frequency: 50 Hz, type of input current: three-phase, input voltage: 400 V, power: 21 kW (28.55 HP), workpiece weight (max.): 800 kg, pressure: 7 bar, Lattuada TL10 AV C straight line edger mitring 0-45°, cerium. Refurbished at our warehouse in Belgium. Tested and ready to go. Lrjdpfx Aajw U Nzrszjt

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, Internal grinding machine | Brand: VOUMARD | Type: 5A LP 1000 Year of manufacture: 1991 Lrsdpfxjzzcmye Aazot Range of parts: Gear wheels, guide rollers, centring bushings. The machine can be inspected under power by appointment. Condition: In working order, ready for use. TECHNICAL SPECIFICATIONS: Working area - Internal grinding diameter: 5 mm - Internal grinding diameter max.: 200 mm - Max. Grinding depth: 250 mm - Peak height: 180 mm - Peak distance: 1.000 mm Working spindle - Spindle bore: Ø 80 mm - Swivelling capability: 0° Sliding spindle carriage - Minimum and maximum swivel range: 25 degree - Minimum longitudinal movement: 3 mm - Maximum longitudinal movement: 600 mm - Table speed, continuously adjustable: 0 - 10 m/min - Workpiece weight: 0,25 tons Grinding wheel / disc - Diameter max.: Ø 60 mm - Width max.: 25 mm - Borehole: Ø 12 mm - Rotational speed: 3.600 - 40.000 rpm - Operating voltage: 380 V, 50 Hz - Control voltage: 24 V - Total power requirement: 8,7 kW - Machine weight approx.: 2,7 tons Dimensions: - Machine (L x W x H): 2,9 x 1,2 x 1,9 m - Water tank (L x W x H): 1,4 x 0,8 x 0,65 m - Motor (L x W x H): 0,8 x 0,4 x 0,65 m ACCESSORIES: - 4-jaw chuck, Ø 250 mm - 1 steady rest and various spindles No guarantee is given for the completeness and accuracy of the technical data and equipment. - Subject to prior sale -

Condition: used, grinding diameter 350 mm grinding length 1500 mm centre height 175 mm Grinding wheel left 500mm diameter Grinding wheel head fix. No swivelling possible. With new control. With new enclosure Lodpfx Aaot Ii Rfezjrt Overhauled according to Kellenberger protocoll

Condition: refurbished (used), Year of construction: 2005, operating hours: 49,331 h, functionality: fully functional, We are selling this KLINGELNBERG OERLIKON tool grinding machine for a Swiss-based Italian group. Additional photos available upon request! Type: B24 Machine type: CNC tool grinding machine Year of manufacture: 2005 Machine No.: AVAILABLE UPON REQUEST CNC control: GE FANUC Series 160i-M Machining process: Wet grinding Automation: Automatic handling station with HIRATA robot Automation accessories: 6 different types of automation pallets / workpiece carriers Total weight: approx. 8,800 kg Lredpoz Ermnjfx Aazjt APPLICATION AREA Precision grinding of cutting tools Profiling of cutting tools Re-sharpening of cutting tools Machining of tools for bevel gear manufacturing Machining of main relief faces Machining of secondary relief faces Machining of chip faces Machining of facets Automated series machining MACHINABLE TOOL FACES A: Main relief face B: Secondary relief face C: Chip face K: Tool head / head face Facets possible on A, B and C faces Facet angle: approx. 1° GRINDING PROCESSES Deep grinding Oscillating grinding Spark-out grinding Rough grinding Finish grinding Straight grinding Angle grinding Form grinding Profile grinding Automatic intermediate dressing Automatic re-profiling of the grinding wheel Individual machining of single tool faces Programmable grinding cycles CNC AXES X-axis: Table longitudinal movement Y-axis: Vertical movement of the grinding wheel spindle Z-axis: Headstock transverse movement A-axis: NC rotary / swivel axis dividing head C-axis: NC rotary axis dividing head Dividing head: NC-controlled 2-axis dividing head A1-axis: Robot axis B1-axis: Robot axis W1-axis: Robot axis Z1-axis: Robot axis Z2-axis: Vertical magazine movement GRINDING SPINDLE Pre-loaded precision ball bearings Automatic grinding wheel diameter compensation Automatic grinding wheel speed compensation Automatic electromechanical balancing system Grinding wheel breakage detection Automatic coolant supply GRINDING WHEELS Grinding material: Diamond / CBN Grinding wheel diameter: Ø 300 mm / Ø 400 mm Grinding wheel width: 40 mm with spacer ring Grinding wheel width: 50 mm without spacer ring Grinding wheel Ø 400 mm at 25 m/s: 1,192 rpm Grinding wheel Ø 400 mm at 30 m/s: 1,431 rpm Grinding wheel Ø 400 mm at 35 m/s: 1,670 rpm Grinding wheel Ø 300 mm at 25 m/s: 1,591 rpm Grinding wheel Ø 300 mm at 30 m/s: 1,909 rpm Grinding wheel Ø 300 mm at 35 m/s: 2,228 rpm Max. documented grinding wheel speed: 2,228 rpm DRESSING SYSTEM Integrated automatic dressing system Automatic dressing Intermediate dressing during the grinding process Automatic re-profiling Profile correction Programmable dressing parameters Compensation for grinding wheel wear MEASUREMENT AND TEMPERATURE COMPENSATION Measuring system: MARPOSS Automatic temperature compensation Measurement relative to the radial reference surface Measurement relative to the axial reference surface Automatic correction of the Y-axis Automatic correction of the Z-axis Temperature compensation during form grinding via the dressing process AUTOMATION Robot manufacturer: HIRATA 4-axis Automatic swivel module 2-finger parallel gripper Inductive proximity switches Pneumatic gripper components Automatic workpiece handling VERTICAL MAGAZINE Magazine positions: 20 Automation pallets: 6 different types Additional workpiece carriers / pallets available

Condition: used, Year of construction: 2004, grinding diameter 250 mm grinding length 650 mm Lrsdpfx Aaeywntyjzet centre height 125 mm Maschine wird mit Wartung und neuer Geometrie verkauft Betriebsstunden bisher 12260 Reitstock mit Feinverstellung Schleifspindelstock schwenkbar mit 5° Hirtverzahnung Papierbandfilter Marposs Messeinrichtung Innenschleifeinrichtung

Condition: used, Year of construction: 1990, grinding diameter 200 mm grinding length 340 mm centre height 100 mm Control CNC 25 kVA voltage 110 / 220 / 3x165 / 3x380 VAC control voltage 24 VDC Lrjdpoywnt Hsfx Aazet

Condition: used, functionality: unexamined, For sale is an HK Orion (Hahn+Kolb) surface grinding machine. The machine is in age-appropriate condition, has not been tested, and is being sold as is. Our service promise: Lredpfoxyyqyox Aazot We prioritize quality, expertise, and customer satisfaction. Our team consists of qualified and experienced technicians specializing in Mazak machines as well as other machinery. We place great emphasis on personal support and are happy to assist you even after your purchase. With us, you are in the best hands – professional, reliable, and passionate about machinery! PS CNC Service Germany GmbH & Co. KG All information is provided without guarantee.

Condition: used, Year of construction: 1998, grinding diameter 350 mm Lredpfozmy Thsx Aazot grinding length 1000 mm centre height 175 mm Control Kelco weight of the machine ca. 4 t

Condition: used, Year of construction: 2002, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm Lredpfxjzz S Awj Aazjt

Condition: used, Year of construction: 1995, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm Teilüberholte Maschine mit Messprotokoll nach Neumaschinentoleranz NEUE Steuerung Eckelmann ENC mit BEMA Schleifsoftware Lodpfjyatx Sjx Aazort KEL-ASSIST für Kelco 90 numerisch gesteuerte B-Achse Innnschleifrinrichtung Dia 80mm Schleifscheibe links Durchmesser 400mm Schleifscheibe rechts Durchmesser 300mm Innenschleifspindel HJN 828 hydraulischer Reitstock Mikroverstellung KEL SET Messsystem