Used Erowa Easy Change for sale (17,170)

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, BERGER drill grinding machines are precise - fast - simple - economical And they help you increase productivity. These ergonomic and easy-to-use, precise drill grinding machines offer you, among other things, the following advantages: • Significantly increased tool life of your drills through even distribution of cutting forces across both cutting edges • Significant reduction of feed forces thanks to precise, symmetrical point thinning • Improved diameter accuracy - the precise and optimizable grinding results in holes whose diameter exactly matches the nominal diameter of the drill. • Improved positional accuracy - the sharp drill tip, precisely pointed and close to the center, no longer "wanders" upon initial contact with the workpiece, but cuts smoothly from the start • Resharpening, point thinning, and inspection in a single setup Furthermore, the purchase of new drilling tools is drastically reduced, as you can now resharpen your existing drills up to 40 times or more in-house! So you're not only protecting the environment, but also your wallet, and, most importantly, your employees' nerves! Keep up with the times... keep up with BERGER technology. Our EPG-1 has been copied countless times over the past 18 years, but its quality has never been matched... With EPG1 / #easy-point-grinder #Grind your drill bits for your material and your operating conditions! For drills (HSS and solid carbide) with diameters ø 7 – 20 mm (Optional ø 3 – 8 mm and ø 20 – 30 mm) with 90° – 140° point angle Dwodpfxjbrptve Anzea Technical Data EPG1 Point angle continuously adjustable 90° – 140° Collet set for drill diameters 7 – 20 mm Optional collet set for drill diameters 3 – 8 mm Optional collet set for drill diameters 20 – 30 mm Point thinning device, point thinning depth continuously adjustable CBN grinding wheel (for HSS drills Ø 118 mm) Optional diamond grinding wheel (for carbide drills) Ø 118 mm Single-phase AC industrial motor 250 watts Spindle speed 2900 rpm Electrical connection 230 Volt 50 Hz Dimensions (L x W x H) approx. 30 x 40 x 20 cm Weight approx. 22 kg Sharpen your drill bits for your material and application conditions quickly, easily, precisely, and affordably

Condition: new, For inquiries regarding the adapter plate, Mr. Herden is at your service (by phone). OilQuick OQ80 Adapter Plate / Bolt-on Adapter / NEW / in stock & immediately available Price: €4,990.00 net / €5,938.10 gross Hole pattern drawing available in the photos. - 2x 1/2" couplings - 1x 3/4" polystyrene coupling - 1x 3/4" coupling - 2x 1" couplings - Excavator class: 25 to 43 tons - Weight: 386 kg Suitable for a wide range of attachments, such as hydraulic breakers, sorting grabs, and also for the following Westtech products: - Westtech CL320 - Westtech C350 - Westtech C450 - Westtech C550 - Westtech CS610 compact (requires drain line) - Westtech CS580 (requires drain line) - Westtech CS780 (requires drain line) - Westtech R900 - Westtech R1300 - Westtech G1250 - Westtech G1650 - Westtech T4000 - Westtech W1350 - Westtech W1800 All compatible Westtech products are also in stock and immediately available! We also have many other OilQuick adapter plates available from stock! Mr. Herden (phone) is happy to assist you. We are happy to provide you with a financing offer upon request. Dsdpfey E Et Hjx Anzewa We are an official distribution and service partner for: - OilQuick - Holp - Gierking GMT - Weber MT - Westtech - DMS - Seppi M. - Magni telehandlers - JCB construction machinery - Mercedes-Benz - Iveco With over 800 used vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We supply the full OilQuick product range! Errors and prior sale excepted! = Further information = Intended use: Construction Unladen weight: 386 kg Contact Marius Herden for further information.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 65 kg Dwsdpfx Ajvz Emmjnzoa Total power requirement 0,75 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1820x585x1450 mm Weight 500 kg Dwedpfx Ansvz Hd Hszea Total power requirement 4 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 61 kg Total power requirement 0,75 kw Djdpfx Aevz Ev Usnzewa

Condition: new, Year of construction: 2025, Cutting length 3200 mm Cutting height 1600 mm Motor output 1,3 kW Dsdpfxswiipme Anzswa Dimensions (L/W/H) 4000x1500x2000 mm machine weight ab. 350 kg

Condition: used, Year of construction: 1994, functionality: fully functional, Listing for Machineseeker – Used CEFLA Painting Line (Fully Operational) For sale is a complete, fully operational paint booth machine dismantled from a used production line. Manufacturer: CEFLA – premium industrial equipment for professional coating applications. System Components: 1 pc. belt conveyor • Length: approx. 1,900 mm • Belt width: 1,400 mm Djdexdwi Ispfx Anzjwa • Conveyor speed: 1.7 – 10.7 m/min 1 pc. CEFLA EASY 2000 automatic spraying machine Condition: Used, fully functional Regularly serviced Immediately ready for use Field of application: Ideal for industrial coating and drying processes, e.g. furniture or wood processing sectors. Other information: Viewing possible by appointment

Condition: good (used), Various quick-change tool holders, total of 42 pcs: 7 pcs WDL 4/50 16 pcs WDR 4/40 Dodpsy N S Ifofx Anzowa 10 pcs WDL 4/40 3 pcs WB 4/60⌀ 3 pcs WBW 4/60⌀ 1 pc WBW 23/60⌀ 2 pcs without type Please let us know which items you are interested in so that we can provide you with an offer.

Condition: used, Year of construction: 2022, Documentation in German Spr Type plate PTO shaft 910 mm with / friction clutch Container attachment L 3200 swivel mounted ex works Mud flaps L / and ladders LED lighting to the rear for road travel Roll-up tarpaulin L / with manual operation Dsdpfx Ajrxr R Senzswa

Condition: used, Year of construction: 2024, Basic hopper / ZA-V Easy spreader unit / warning sign foiling / 910 mm PTO shaft / with friction clutch / S 1400 hopper extension, welded / factory-fitted / S mud flap / LED lighting to rear / Easy operating computer Dwedpfxouhp Eho Anzsa

Condition: refurbished (used), Year of construction: 2000, table length: 1,000 mm, table width: 1,000 mm, operating pressure: 3,800 bar, (Pictures in current state) - prepared for two cutting heads (1x pure water) - Control unit will be renewed - will be sandblasted and repainted - Pump optionally available - available after order in 12-16 weeks Dwjdpfenab Rlex Anzea Special features: - max. two cutting heads per Z-axis - Can be individually adapted to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 873 h, load capacity: 4,000 kg, lifting height: 17,550 mm, fuel type: diesel, construction height: 2,500 mm, empty load weight: 12,400 kg, total length: 6,420 mm, drive type: Diesel, construction width: 3,790 mm, Telescopic forklift, rigid frame Speed class: 25 Technical condition: very good Dsdpfx Anjv Swphszjwa Description: The Manitou MT 1840 Easy is a powerful telescopic handler for construction sites, as well as lifting and material transport tasks. With a lifting height of up to 17.55 m, a lifting capacity of 4,000 kg, and all-wheel drive, this machine is ideal for working on uneven terrain and with heavy loads. Robust design. High off-road capability. Ideal for lifting, assembly, and material handling. Easy to operate and versatile. Further information and a non-binding inquiry can be found on our website – Safe working at any height. In addition to this machine, we offer other aerial work platforms and telescopic handlers for rent and sale. Our machines are continuously serviced and inspected. Rental, sales, service & repair. With us, you get everything from one source. Lease purchase, financing, and the purchase of used machines are also possible. Our team will be happy to provide you with competent and personal advice.

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 359 h, load capacity: 3,300 kg, lifting height: 6,900 mm, fuel type: diesel, construction height: 2,300 mm, empty load weight: 6,700 kg, total length: 4,740 mm, drive type: Diesel, construction width: 2,330 mm, Telescopic forklift, rigid frame Speed class: 25 Technical condition: very good Battery condition: very good Description: The Manitou MT 930 is a compact and versatile telescopic handler for construction sites, agriculture, and material transport in confined spaces. With a lifting height of up to 6.9 m, a lifting capacity of 3,000 kg, and permanent all-wheel drive, this machine is ideal for lifting and loading tasks, even on uneven terrain and in tight spaces. Compact design. High maneuverability and off-road capability. Ideal for construction sites, agriculture, and material transport. Robust and easy to operate. Further information and a non-binding inquiry can be found on our website - Safe working at any height. In addition to this machine, we offer other aerial work platforms and telescopic handlers for rent and sale. Our machines are regularly serviced and inspected. Rental, sales, service & repair. We offer everything from a single source. Lease purchase, financing, and the purchase of used machines are also possible. Our team will be happy to provide you with competent and personalized advice. Dwsdpfjvi Uhcex Anzja

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350x200 saw band length 3375x27x0,9 mm band speed 37 + 74 m/min table height 940 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,65 t dimensions of the machine ca. 1,5 x 1,75 x 1,9 m SPECIAL PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right - Material height button - Ball bearing turntable - hydraulic Vice, laterally displaceable Dwedpfsd Iipxjx Anzja - Massive, large material support - Automatic cooling

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350x200 saw band length 3375x27x0,9 mm band speed 18 - 100 m/min table height 940 mm total power requirement 1,5 kW weight of the machine ca. 0,65 t dimensions of the machine ca. 1,5 x 1,75 x 1,9 m SPECIAL PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right - Material height button - Ball bearing turntable - hydraulic Vice, laterally displaceable Dodpfx Asfgyiajnzswa - Massive, large material support - Automatic cooling

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 450x320 saw band length 4250x34x1,1 mm band speed 40 + 80 m/min table height 845 mm saw band width 34 mm total power requirement 2,2 kW weight of the machine ca. 0,985 t dimensions of the machine ca. 1,4 x 2,0 x 2,2 m Double miter band saw, hydraulic semi-automatic, DGS 350/450 HA-I · miter left + right 60° without machine conversion · 34 mm saw blade width · Large material support turntable, ball bearings · To position the saw blade guides using a very wide linear guide · Strong, robust transmission · Large chipboards · Infeed and outfeed roller Removable chip tray (disinfection) · Free-standing control panel, safe and ergonomic · Storage space for tapes, consumables · Cutting pressure regulator Feed regulator · Fully hydraulic vise Preload super fast (front loading) Dwsdpofgyicsfx Anzja · Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise Optimum, material-independent cutting result through fine adjustment of the saw frame by means of: *Pressure Control Valve (Cutting Pressure Force) *Feed Control Valve (Speed) *Switch with pictogram, easy and clear to use

Condition: new, cutting diameter 255 mm saw band length 2765x 0,9 x 27 mm cutting width 300 x 180 mm turning speeds 35 + 70 U/min total power requirement 1,8 kW weight of the machine ca. 450 t dimensions of the machine ca. 1,7 x 1,23 x 1,75 m SPECIAL PRICE!!! Double miter metal band saw, frequency converter hydraulic semi-automatic GBS 250 Super HA-I Easy • miter left 60° + right 45° • Material height sensor (automatic cut start detection) • Frame and gear made from one piece, very quiet cut and very low vibration • Hydraulic vice can be moved sideways a. • Guided, high quality industrial bearings • Solid vice + machine casting • Large machine bed Djdefn Andopfx Anzswa • Machine base with tool compartment and chip drawer • Cut monitoring by ammeter • Cutting pressure feed regulator • Support roller (infeed side) • Ball bearing turntable Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: new, capacity 90 degrees: round 310 mm capacity 90 degrees: square 280 mm 400x250 saw band length 4020x34x1,1 mm Dsdpfsd Iiptsx Anzswa band speed 37 + 74 m/min table height 940 mm total power requirement 1,8/2,2 kW weight of the machine ca. 0,68 t dimensions of the machine ca. 1,5 x 1,78 x 1,3 m ACTION PRICE !!! Double miter band saw, hydraulic semi-automatic, GBS 310/400 HA-I Easy • miter left 60° + right 45° • Industrial hydraulics, powerful 18 bar • Best access to the material • Ammeter to check a. - Optimization of cutting force - Tape life - cutting course • Vise closes/opens hydraulically • Chip removal brush • Material turntable with ball bearings b. • Adjustable quick-release c. • Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: new, Year of construction: 2025, functionality: fully functional, pressure: 6 bar, warranty duration: 60 months, inner dimension width: 5,000 mm, inner dimension length: 15,000 mm, inner dimension height: 5,000 mm, filter area: 352 m², volume flow: 22 m³/h, Equipment: documentation/manual, lighting, Blasting house *up to 5 years warranty* for all blasting media made of a steel construction/isopanels with filter system, air circulation system, blasting media preparation, pressure blasting pot 200l automatically refilling, blasting hose with dead man's control, breathing air system, LED lighting, wall cladding 70shore 4mm fabric rubber, sweep pit bucket elevator. Blast media recirculation via sweeping pit with bucket elevator can be upgraded to cross conveyor screw with dosing hood across the entire width as sweeping pit or complete flat conveyor floor. Workpiece transport can be retrofitted: blasting carriage with track bed, crane system, crane roof opening, etc. For glass bead blasting for stainless steel, can be upgraded with the correct magnetic drawer or electrically driven magnetic drum separator. When blasting with 2 different blasting media (ferritic and mineral), upgradeable with magnetic drum separator, final magnetization stage and second air separator for blasting media separation, cleaning. Dodeu Hy Tpjpfx Anzowa Safety equipment: Emergency lighting battery, emergency stop switch in the cabin and outside, viewing window to the blasting chamber, door/door limit switch, dead man's control, pressure vessel quick venting Warranty up to 5 years on various components. 50 years of experience and more than 3000 systems in blasting machine construction

Condition: new, Year of construction: 2026, Dosing ranges: 1 ml - 38 ml 2 ml – 100 ml 5 ml – 250 ml 20 ml – 680 ml 50 ml – 1,500 ml Piston Filler Filling nozzles and pumps made of stainless steel AISI 316 Bottle infeed via chain conveyor Belt length 2,000 mm, housing made of stainless steel 1 or 2 filling positions possible Performance depends on the type of product, number of pumps, and container size, up to 1,600 bottles/hour with 2 filling positions Up to 900 bottles/hour with a single filling position Volumetric filling of products/bottles Automatic cap application Djdpjwpr Ifofx Anzewa Very compact dimensions (Basic Version 2,000 x 750 mm) Filling volume infinitely adjustable Very easy operation of the machine Connection to a labeling machine possible Pictures may show additional options

Condition: new, Year of construction: 2025, functionality: fully functional, pressure: 6 bar, warranty duration: 60 months, inner dimension width: 4,000 mm, inner dimension length: 6,000 mm, inner dimension height: 3,000 mm, filter area: 99 m², volume flow: 7 m³/h, Equipment: documentation/manual, lighting, Blasting house for all blasting media made of a steel construction/isopanels with filter system, air circulation system, blasting media preparation, pressure blasting pot 200l automatically refilling, blasting hose with dead man's control, breathing air system, LED lighting, wall cladding 70shore 4mm fabric rubber, sweep pit bucket elevator. Blast media recirculation via sweeping pit with bucket elevator can be upgraded to cross conveyor screw with dosing hood across the entire width as sweeping pit or complete flat conveyor floor. Djdpfx Aeu A A Tkonzowa Workpiece transport can be retrofitted: blasting carriage with track bed, crane system, crane roof opening, etc. For glass bead blasting for stainless steel, can be upgraded with the correct magnetic drawer or electrically driven magnetic drum separator. When blasting with 2 different blasting media (ferritic and mineral), upgradeable with magnetic drum separator, final magnetization stage and second air separator for blasting media separation, cleaning. Safety equipment: Emergency lighting battery, emergency stop switch in the cabin and outside, viewing window to the blasting chamber, door/door limit switch, dead man's control, pressure vessel quick venting Warranty up to 5 years on various components. 50 years of experience and more than 3000 systems in blasting machine construction

Condition: new, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). OilQuick OQ70-55 Adapter Plate / Bolt-on Adapter / NEW / in stock & immediately available Price: €4,190.00 net / €4,986.10 gross A drawing of the hole pattern is available in the photos. - 2x 1/2" coupling - 2x 3/4" Poly couplings - 2x 1" coupling - Also available from stock with leak oil line coupling! Additional charge: €440.00 net - Excavator class: 18 to 32 tons - Weight: 302 kg Suitable for many attachments such as hydraulic breakers, sorting grabs, and also for the following Westtech products: - Westtech CL320 - Westtech C350 - Westtech C450 - Westtech C550 - Westtech CS610 compact (requires leak oil line) - Westtech CS580 (requires leak oil line) - Westtech CS780 (requires leak oil line) - Westtech R900 - Westtech R1300 - Westtech G1250 - Westtech G1650 - Westtech T4000 - Westtech W1350 - Westtech W1800 All matching Westtech products are also in stock and immediately available! We have many more OilQuick adapter plates in stock for immediate delivery! Mr. Herden (phone ...) will be happy to assist you. Financing offers available on request. We are official sales and service partners of: - OilQuick - Holp - Gierking GMT - Weber MT - Westtech - DMS - Seppi M. - Magni Telescopic Handlers - JCB Construction Machinery - Mercedes-Benz - Iveco Dedpfsyl Hgyex Anzowa With 800 used commercial vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete OilQuick range! Errors and prior sale excepted! = Additional Information = Application: Construction Please contact Marius Herden for more information.

Condition: new, For inquiries regarding the attachment, Mr. Herden is happy to assist you (by phone at ...). Liebherr Likufix SW48 Adapter Plate / NEW / in stock & immediately available Price: €5,690.00 net / €6,771.10 gross Two hole patterns available. Drawings of the hole patterns can be found in the photos. - Likufix SW48 adapter plate is fitted with 4 connections - Also available from stock with connector for leakage oil line! Surcharge: €375.00 net - Excavator class: 15t – 35t - Weight: 258 kg Compatible with many attachments such as hydraulic hammers, sorting grabs, and also suitable for the following Westtech products: Small hole pattern: - Westtech CL190 - Westtech CL260 - Westtech C250 - Westtech G850 Large hole pattern: - Westtech CL320 - Westtech C350 - Westtech C450 - Westtech C550 - Westtech CS610 compact (requires leakage oil line) - Westtech CS580 (requires leakage oil line) - Westtech CS780 (requires leakage oil line) - Westtech R900 - Westtech R1300 - Westtech G1250 - Westtech G1650 - Westtech T4000 - Westtech W1350 - Westtech W1800 All compatible Westtech products are also in stock and immediately available! Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and ready for immediate delivery. Mr. Herden (Tel. ...) will gladly assist you. We are also happy to provide you with a financing offer upon request. We are an official sales and service partner for OilQuick. We are an official sales and service partner for Holp. We are an official sales and service partner for Gierking GMT. We are an official sales and service partner for Weber MT. We are an official sales and service partner for Westtech. Dwodpfx Aneykhuiozea We are an official sales and service partner for DMS. We are an official sales and service partner for Seppi M. We are an official sales and service partner for Magni telescopic handlers. We are an official sales and service partner for JCB construction machinery. We are an official sales and service partner for Mercedes-Benz. We are an official sales and service partner for Iveco. Additionally, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted! = More information = Intended use: Construction Please contact Marius Herden for further information.

Condition: used, Year of construction: 2016, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Rädlinger swing rotator for CAT M318 / CW 40 mount / Year of manufacture: 2016 Price: €12,890.00 net / €15,339.10 gross - Equipment class: 23 t - Weight: 840 kg Matching rigid ditch cleaning bucket available for €1,490.00 net. Price only applicable when purchased together with the swing rotator. We have many more attachments in stock, available immediately! Financing offers available on request. We are an official sales and service partner for Westtech, Gierking GMT, OilQuick, Weber MT, Holp, DMS, Seppi M., Magni telescopic handlers, JCB construction equipment, Mercedes-Benz, and Iveco. Additionally, with 800 used commercial vehicles, we are one of the largest commercial vehicle dealers in Germany. Dedpfx Asymi I Aenzjwa Errors and prior sale excepted! Internal No: 562046 = More information = Intended use: Construction Please contact Marius Herden for further information.

Condition: new, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). Liebherr Likufix SW33 Adapter Plate / NEW / In Stock & Immediately Available Price: €4,690.00 net / €5,581.10 gross Two bolt patterns available. Drawings of the bolt patterns can be found in the photos. - Likufix SW33 adapter plate is pre-fitted for 4 lines - Also available from stock with a connector for a leakage oil line! Surcharge: €375.00 net - Excavator class: 8t – 20t - Weight: 160 kg Suitable for many attachments such as hydraulic hammers, sorting grabs, as well as for the following Westtech products: Small bolt pattern: Dodsykhucepfx Anzswa - Westtech CL190 - Westtech CL260 - Westtech C250 - Westtech G850 Large bolt pattern: - Westtech CL320 - Westtech C350 - Westtech C450 - Westtech C550 - Westtech CS610 compact (requires leakage oil line) - Westtech CS580 (requires leakage oil line) - Westtech CS780 (requires leakage oil line) - Westtech R900 - Westtech R1300 - Westtech G1250 - Westtech G1650 - Westtech T4000 - Westtech W1350 - Westtech W1800 All matching Westtech products are also in stock and immediately available! Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) are in stock and immediately available. Mr. Herden (Tel. ...) will be happy to advise you. On request, we will also be pleased to provide you with a financing offer. We are an official sales and service partner for OilQuick, Holp, Gierking GMT, Weber MT, Westtech, DMS, Seppi M., Magni Telehandlers, JCB Construction Machinery, Mercedes-Benz, and Iveco. Furthermore, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. Subject to errors and prior sale! = Further Information = Intended use: Construction Please contact Marius Herden for more information.