Used Famar Tandem 250 for sale (11,252)

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 250 mm -soft: interchangeable jaws -Bayonet: Short cone flange, cone size 6, cone Ø 106 mm, bolt circle Ø 133.4 mm -Passage: Ø 81 mm Dsdeduacijpfx Al Soku -Weight: 22 kg

Condition: used, 2 column punching tool, separating tool, punching tool, punch, punching die, punching punch, Dedpfx Aodxxrrel Soku -2 pillars: punching tool -Recording: Ø 40 mm bolt -Dimensions: 300/360/H375 mm -Weight: 130 kg

Condition: good (used), Chuck flange, flange mount, lathe chuck flange, drive flange -Muck flange for: three-jaw chucks, four-jaw chucks, faceplates Djdpfx Alod Hd Nms Sjku -Outer diameter: 250 mm -Cone diameter: 106 mm -Bolt circle: Ø 4 x 160 mm -Weight: 8 kg

Condition: good (used), Year of construction: 2002, Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station -Manufacturer: Couperus Hydrauliek, hydraulic station made of slats/blind production -Housing: material VA -Motors: 5x elsto 1.5 kW Dkodpfopy Rx Tsx Al Sju -Pressure: up to 250 bar -Flow rate: 10 l/min -Individual components: see photos -Dimensions: 2100/660/H1040 mm -Weight: 554 kg

Condition: used, Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station -Manufacturer: Couperus Hydrauliek, hydraulic station made of slats / blind production -Housing: material VA Dkodpfx Aop Tbaasl Seu -Motors: 7x elsto 2.2 kW -Pressure: up to ca. 250 bar -Flow rate: ca. 10 l/min -Individual components: see photos -Dimensions: 3000/560/H1000 mm -Weight: 380 kg

Condition: good (used), Key bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Manufacturer: Forkardt, wedge bar chuck with clamping plate -Chuck size: Ø 250 mm -Bolt circle: Ø 235 mm Dkjdpfx Aljgp Tm Ss Ssu -Mounting: Short taper 11 (196.8 mm) -Through hole: 60 mm -Total dimensions: Ø 400 x 265 mm -Weight: 67 kg

Condition: used, Year of construction: 1988, Pressure 063 t throat 250 mm stroke 10 - 100 mm no. of strokes 120 /min distance table/ram, max. stroke up, adjustment up 380 mm table surface area 700 x 500 mm hole in the table 180 x 140 mm table height over floor 700 mm ram surface 360 x 275 mm ram adjustment 60 mm Dksdpfjzrpn Sox Al Sou power requirement 5,5 kW weight 3,8 t Dimensions (WxDxH) 1,9 x 1,7 x 2,4 m permitted for manual loading according to the German Safety Regulations (UVV) with hydraulic clutch/brake combination, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, fix table, manual central lubrication, two-hand and foot operation

Year of construction: 2019, condition: used, Technical Data: • Working width: min. 20 mm, max. 250 mm • Winding diameter: max. 510 mm • Core sizes: min. 1” to max. 3” (up to 6” with adapter) • Compressed air supply: 6 bar • Web tension: 1–21 N Equipment: • Base frame with two servo motors • 2 pneumatic winding shafts • Web tension system via dancer roller • Splice and label defect detection • Splice table • Measuring roller • Counter • Operation via HMI touchscreen with digital handwheel Features: • Bidirectional winding • Inside and outside winding • Winding tension control: diameter-dependent or independent • Fully reproducible winding results • Integrated job memory (recipe management) • Counter for labels, running meters and diameter Performance Model Gepard 500 Speed: 500 m/min (depending on material and winding diameter) Web width: 250 mm Guide rollers: approx. 80 mm CFRP Counter: Diameter, running meters, label counter with ultrasonic sensors for “clear-on-clear” labels Dedpfx Alszq U Sye Ssku Splice detection: Yes Check for missing labels: Yes Camera upgrade: Possible Printing Module of the HR Series Printing Module: Rea-Jet HR Series, up to 2 print heads, 25.4 mm printing width when supplied with one print head (12.7 mm printing width) Unwinding shafts: CFRP encoder roller (particularly suitable for thin films) with integrated encoder Speed: 60 dpi / 300 m/min; 600 dpi / 30 m/min Front and back printing: Yes Register accuracy: +/- 0.3 mm Ink: DCV2 Splice stations: Fully automatic splice stations for uninterrupted printing Software: Error-free start and stop of the printing process in bidirectional operation. Antistatic bars: 2 DC antistatic bars (one for the front and one for the back) Inspection System HQ 5050 General: Base plate, control unit, 40-inch HD LCD monitor, lighting system, high-performance image processing computer Available Algorithms: • Print image inspection • 2D code detection (only with > 4-MP camera), minimum size 10 mm / single element 0.6 mm / QR code / Micro-QR / Micro-PDF • Barcode capture (only with 4-MP camera), minimum size 0.6 mm / JAN/EAN/UPC / Code39 / Codabar / ITF / Code93 / Code128/GS1-128 / GS1 DataBar / Pharmacode / OCR capture (only with a camera resolution of > 4 MP) • General distance measurement • Data capture in CSV file Lighting: • Top light dome with glare-free illumination and high-performance LED (32,000 Lux) • LED flat dome backlight (30,000 Lux) for transmitted light inspection Camera: • 5-MP QSXGA color camera • 2,448 x 2,048 at 200 x 167 mm > 310 dpi • Min. defect size 0.3 mm • Approx. 160 m/min (100 x 100 mm label) Technical data according to user (without guarantee)

Condition: ready for operation (used), Year of construction: 2021, operating hours: 9,500 h, clamping force: 1,000 kN, overall weight: 5,290 kg, This 5-axis SUMITOMO SHI DEMAG IntElect2 100/470-250 was manufactured in 2021. It features a clamping force of 1000 kN and a tie bar distance of 470 mm. The machine includes an injection unit size of 250 and a screw diameter of 30 mm. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG IntElect2 100/470-250 electrical injection moulding machine we have for sale. Contact us for further details. Dedjzp Ew Dspfx Al Ssku - Tie Bar Distance: 470 mm- Mould Height Min.: 180 mm- Mould Height Max.: 550 mm- Centering Diameter (Fixed Platen): 125 mm- Centering Diameter (Moving Platen): 125 mm- Ejector Stroke: 150 mm- Ejector Force: 32 kN- Ejector Speed: 333 mm/s- Injection Unit Size: 250- Screw Diameter: 30 mm- L/D Ratio: 20- Injection Speed: 350 mm/s- Control Unit: SDIAS- Mains Connection / Voltage: 400 V / 50 Hz- Current / Amperage: 70 A- Short Circuit Capacity (Icw): 2.0 kA- Max. Hydraulic Pressure (Pmax): 210 bar- Total Weight: 5290 kg- Robot System Model: SDR 5S H&P- Robot Load Capacity: 3 kg- Robot X-Stroke (Transverse Stroke): 1000 mm (Non-operator side)- Robot Y-Stroke (Demoulding Stroke): 400 mm- Robot Z-Stroke (Vertical Stroke): 1000 mm- Additional / Peripheral Equipment:- Material Hopper Loader / Conveyor: KOCH TECHNIK- Temperature Control Unit: HB-THERM Thermo-5

Condition: new, total height: 1,700 mm, total length: 2,000 mm, total width: 1,480 mm, Equipment: documentation/manual, Semi-Automatic Band Saw Machine Saw blade size 2910 x 27 x 0,9 mm Cutting speeds 20 - 120 m/min Cutting capacity 0° round Ø258 mm Cutting capacity 0° square 250x250 mm Dsdpfx Aezquywjl Seku Cutting capacity 0° rectangular 320x100 mm Cutting capacity 45° round 210Ø Cutting capacity: 45° square 195x195 mm Cutting capacity: 45° rectangular, 210x100 mm Cutting capacity 60° round 135Ø Cutting capacity 60° square 110x110 mm Cutting capacity 60° rectangular 135 x 100 mm Cutting capacity -45° round 185Ø Cutting capacity -45° square 170x170 mm Cutting capacity -45° rectangular 195x100 mm Weight 390 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face milling cutter, corner milling cutter -Manufacturer: Widax Kelch, face milling cutter head diameter 270 mm -Recording: Chalice 178 03 M Ø60 SK50 -Cutter head: Widia type WIDAX M45 D.250 R 13 -Number of teeth: 13 -Recording: SK50 -Dimensions: Ø 270 x 235 mm Dodpozqywzjfx Al Sjku -Weight: 30.9 kg

Condition: good (used), Year of construction: 2012, maximum machining diameter 380mm, Dkjdpfjzaz Uzsx Al Ssu maximum machining length 508mm, bar capacity 74mm, spindle speed 4,000rpm, spindle power 18.5Kw, milling speed 4,500rpm, milling power10Kw, sub-spindle speed 6,000rpm, sub-spindle power 5.5Kw, Y axis -51/+51mm, 12 station turret, Mazatrol Matrix Nexus control, swarf conveyor, parts catcher , tool setter, 3 jaw chuck and Barfeed unit.

Condition: excellent (used), Year of construction: 2018, HS Flex 20 station pallet loader. XYZ: 600 x 550 x 330mm, Maximum workpiece diameter 450mm, Djdpfx Alozghngj Soku maximum workpiece height 355mm, Maximum table load 300Kg, A axis -/+ 115 degrees, spindle taper HSK 63, spindle speed 15,000rpm, 30 station tool changer, Heidenhain TNC 640 control, with swarf conveyor , and high pressure coolant.

Condition: good (used), Clamping angle, clamping aid -Clamping angle: for workpiece clamping -Groove width 27 mm -Number: 3x mounting brackets available -Price: per piece Dodpfx Alozn I S Uj Sjku -Dimensions: 280/250/H290 mm -Weight: 13.5 kg/pc.

Condition: used, Year of construction: 2007, operating hours: 8,957 h, Equipment: all wheel drive, * Enclosed cab * Air conditioning Djdpfx Aloy Daf Is Seku * Radio * Central lubrication system * Work lights * Loading bucket * Load disconnect ----Subject to errors and prior sale ----Vehicle number: 11891

Condition: good (used), Year of construction: 1977, Druck 250 t Staenderweite 1120 mm Hub 250 mm Entfernung Tisch/Stoessel, gr. Hub oben, Verst. oben 500 mm Tischflaeche 1100 x 900 mm Tischhoehe ueber Flur 950 mm seitlicher Staenderdurchgang 700 mm Stoesselflaeche 1100 x 900 mm Geschwindigkeit ab mm/s Geschwindigkeit auf mm/s Arbeitsgeschwindigkeit mm/s Ölinhalt 730 l Dodpsx Ug Defx Al Ssku Antriebsleistung 56 kW Gewicht 25 t Raumbedarf (BxTxH) 2,3 x 1,55 x 3,96 m Zusatzinformationen u mit oelhydr. Antrieb, hydr. (§20) und elektr. Steuerung nach UVV, Lichtschranke (Sick), obere und untere Hubbegrenzung, druck- und wegabhaengig steuerbar, Schnittschlagdaempfung, Kurzhubsteuerung, neue Steuerung (Mitsubishi), Sicherheitssteuerung (PNOZ Multi), Bildschirmsteuerung mit Touch-Screen, Schaltschrank

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376292, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Serial number: 376292 Year of manufacture: 2020 Material number: 10466442 Measurement category: C Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total-pressure increase: 2500 daPa Operating-point total-pressure increase: 1862 daPa Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Drive-end bearing: 6318 Non-drive-end bearing: 6318 Dkedpfozw Ucxex Al Sou Lubricant: Shell Gadus S2 V100 2 Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Conformity marking: CE

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376295, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Dkodpfx Aezw Ug Rel Seu Serial number: 376295 Year of manufacture: 2020 Material number: 10466442 Measurement category: C Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total pressure increase: 2500 daPa Operating-point total pressure increase: 1862 daPa Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Drive-end bearing: 6318 Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Conformity marking: CE

Year of construction: 2006, operating hours: 40 h, condition: used, functionality: fully functional, machine/vehicle number: Seriennummer: 4292-1-197652, Gerstenberg Schröder Consistator MD 250 L-S For sale is a used Gerstenberg Schröder Consistator MD 250 L-S scraped surface heat exchanger from a production facility. The unit was used for processing vegetable juice and is being sold due to process changes and restructuring. Technical Data Manufacturer: Gerstenberg Schröder Type: Consistator MD 250 L-S Year of Construction: 2006 Serial Number: 4292-1-197652 CE Marking: CE 0038 Design: Scraped Surface Heat Exchanger Product Side Medium: Vegetable juice Pressure Range: 0 / 35 bar Test Pressure: 59 bar Max. Temperature: 150 °C Volume: 25 liters Media Side Medium: Steam Pressure Range: 0 / 13 bar Test Pressure: 28 bar Max. Temperature: 165 °C Volume: 75 liters Condition The machine is used and comes from an industrial production environment. Inspection is possible by prior appointment. Dkjdpfx Alozwwibo Ssu Location 71106 Magstadt, Germany Sale Sale from location / Ex Works. Loading and transport are to be arranged by the buyer, or can be arranged upon agreement. If you are interested or have any questions, further information, pictures or details can be provided.

Condition: used, Year of construction: 2026, In use with the Lehnhoff MS03 system WVE.250 Roller width 250 mm For excavators from 1.5 t to 7 t Roller diameter 600 mm Overall height without adapter 650 mm Weight 190 kg What is a compaction roller used for? A compaction roller on an excavator is primarily used to efficiently compact soil, trenches, slopes, and backfill in earthworks and road construction. It is ideal for hard-to-reach areas, offers a safe alternative to manual compaction, and enables fast, uniform compaction – without vibration. Safety: No personnel need to stand directly in the trench. Important areas of application and functions: Trench construction + pipeline zones: Compacting soil in the trench, especially around pipes, without damaging them. Dkedpfxezw Ngxj Al Ssu Slope and surface compaction: Stabilizing steep slopes, backfilling foundations, or large areas. Gardening and landscaping: Soil compaction in narrow or difficult areas. Demolition + road construction: Re-compacting layers after filling operations. Dimensions, price, and weight without adapter

Condition: used, axle configuration: 2 axles, first registration: 04/2019, loading space length: 56,000 mm, loading space width: 24,300 mm, suspension: air, tire size: 275/70-22,5, color: black, Year of construction: 2019, = Additional Options and Accessories = - LED lighting - Air suspension = Notes = Internal number for customer inquiries: 6-118 Used PAVIC ZHTA 18 56Z 22.5" tandem short log trailer 2-axle tandem trailer for the transport of roundwood. Fitted with Alcoa Dura Bright aluminum rims. Vehicle description: Djdpfxszikbue Al Sjku 4 x OptiPa loading bunks, aluminum 8 x OptiPa aluminum loading stakes, one-piece Unladen ride height approx. 1050 mm Chassis length approx. 5600 mm (head frame to head frame) Overall length 7,800 mm Smooth sheet metal cover, 3 mm Support jacks, foldable for improved ground clearance Tow hitch, ø 50 mm Axles: 2 x 10t SAF off-road axles Axle reinforcement for off-road use Retaining cables for the air suspension ABS, EBS, disc brakes Well-balanced, i.e., good handling Smartboard/TIM with axle load function EBS braking system from Knorr or Wabco, at our discretion, with Roll Stability Program Tires 275/70 R 22.5 (approx. 70% tread depth remaining) on Alcoa Dura Bright aluminum rims Work lights, LED LED side marker lights/position lights Financing, leasing or hire purchase is possible. Our sales team is available to answer any further questions. This is a non-binding offer. Subject to prior sale, errors and changes. = Further Information = Tire size: 275/70-22.5 Brakes: Disc brakes Suspension: Air suspension GVWR: 18,000 kg Body brand: PAVIC short log bunks OPTIPA SL

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, overall weight: 392 kg, total width: 1,500 mm, total length: 4,000 mm, cutting height (max.): 250 mm, type of input current: three-phase, space requirement length: 4,000 mm, space requirement width: 1,500 mm, rotational speed (max.): 6,670 rpm, rotational speed (min.): 6,670 rpm, spindle speed (min.): 6,670 rpm, spindle speed (max.): 6,670 rpm, power of the milling unit: 6,000 W, length stop: 3,000 mm, working width: 500 mm, working height: 250 mm, input voltage: 400 V, power: 6 kW (8.16 HP), Mafell ZAF 250 - EXCELLENT CONDITION Scope of delivery: -1 milling head, complete with reversible blade; -1 support table Maximum wood dimensions (W x H) rectangular: 500 x 250 mm Maximum wood dimensions (W x H) 60°: 220 x 250 mm Dodpfx Alozbnl As Seku Length of the support with scale: 3000 mm Feed rate: 0.9 - 2.2 m/s Installation area: 1.5 x 4 m Nominal idling speed: 6670 rpm Nominal power: 6000 W Weight: 392.1 kg Three-phase motor: 400 V / 50 Hz Product details: -With the ZAF 250 Vario, all tenon shapes can be produced quickly and accurately, efficiently and with a perfect fit. - Straight tenons, angled tenons, corner and mortise joints - the compact ZAF 250 Vario is the right choice. - Using a stop, the exact length scale can be adjusted. -The milling tool, specially developed for the ZAF 250, can be quickly adapted to different tenon lengths and for milling joints. -The ZAF 250 Vario has precise adjustment options and a clear control panel. Thanks to the built-in laser, you can position the wood accurately. Result: Milling with millimeter precision in any type of wood! -After the tenon geometry has been set, the milling head automatically follows the shape of the tenon and delivers the desired tenon - including surface milling, chamfering and beveling. -The ZAF 250 Vario has an adjustable feed rate for applications in hardwoods. Application area: -Tenon and mortise milling up to 60° -Material usage, e.g.: solid wood and glued laminated timber Advantages: -Significant time saving - due to simple and quick adjustment of length, angle and tenon and mortise dimensions. - Maximum wood dimensions 500 x 250 mm at 0° and 220 x 250 mm at 60°. -Minimal space requirement – thanks to the swiveling head, the workpiece always remains in the same position. -No wood waste - fully dust-extractable.

Condition: used, Year of construction: 2016, Overview Complete craft microbrewery around a 250-litre batch brewhouse - the Slowbeer 250, built in 2016 by Škrlj d.o.o. (Slovenia). The package covers the whole process from malt crushing to bottling - brewhouse, two 1,000 L fermenters, hot water tank, glycol chiller, 4-spout bottling unit and malt mill. All main units date from 2016 - a turnkey set for a brewpub or a start-up brewery. Technical data - Brand: Slowbeer - main units built by Škrlj d.o.o., Slovenia - Model: Slowbeer 250 - Škrlj COMPACT BREWHOUSE MINI 250 L (type BHM 250, 2.5 hl) - Year of manufacture: 2016 - Batch capacity: 250 L - Heating: thermal-oil jackets, electrically heated - 400 V, 50 Hz - Material: stainless steel AISI 304 (EN 1.4301), vessel and jackets - Fermentation capacity: 2 x 1,000 L (nominal) Scope of Delivery - Compact brewhouse | Škrlj (Slowbeer 250) | COMPACT BREWHOUSE MINI 250 L | 250 L per batch, thermal-oil heated, agitator with Bonfiglioli gear motor, Lowara CO350/03K/A wort pump (2019), Pedrollo NGA 1B thermal-oil pump, IPROS TP4001/15 plate heat exchanger, control cabinet with Omron frequency inverters | 2016 - Beer fermenters, 2 units | Škrlj | ZKG 1000 L | nominal 1,000 L each (1,230 L gross volume per vessel), AISI 304, atmospheric vessel 0-50 °C, water/glycol cooling jackets on shell and cone (3.0 bar operating, 6.0 bar test), sample valve, level indicator, CIP spray ball; recirculation pump with cleaning hoses plus one unused spare pump | 2016 - Hot water tank | Škrlj | 1200 L | AISI 304, electric heating 24.4 kW, 0-90 °C, CE 0531 | 2016 - Glycol chiller | MTA | TAEevo TECH 020 | 400 V / 3-ph / 50 Hz, 3.9 kW electrical input, refrigerant R410A, water circuit max. 6 bar, hose circuit for the fermenter jackets, digital temperature control | 2016 - Gravity bottling unit | Mori-Tem | MODERNA B.4 A LE | 4 stainless steel filling spouts, Ebara JESX M5 feed pump, 230 V single-phase 50 Hz | 2016 - Malt roller mill | Egon Sommer Maschinenbau | PICCOLO 11 SB | 1.1 kW three-phase motor (230/400 V) | 2016 Transport dimensions (palletised, approx.) - Brewhouse: 2,400 x 1,200 x 2,200 mm, 660 kg - Fermenters (each): 2,700 x 1,100 x 1,245 mm, 240 kg - Hot water tank: 1,210 x 1,210 x 2,245 mm - Glycol chiller: 1,300 x 600 x 955 mm, 220 kg - Bottling unit: 1,000 x 700 x 1,650 mm, 180 kg Djdezvqi Sspfx Al Ssku - Malt mill: 800 x 600 x 1,200 mm, 90 kg Condition Used - very good to excellent overall condition. Brewhouse, fermenters and malt mill in excellent condition; chiller and bottling unit in good working order. The hot water tank is fully functional, with a light cosmetic dent on the top cover and normal limescale deposits inside. CE declarations and technical documentation are available for every unit except the malt mill, where the documentation is still being confirmed. Availability Immediately. Location: Spain. Dismantling and loading by arrangement.

Year of construction: 1997, condition: used, Specification Data Manufacturer VDF Boehringer Model VDF 250 Cm Year 1997 Serial No. 1114.3705-24 Machine type CNC turning center / CNC lathe Control Siemens Sinumerik 840C Design Slant-bed Tailstock No Swing over bed 550 mm Swing over cross slide 480 mm Maximum turning length 1,000 mm X-axis travel 405 mm Z-axis travel 1,099 mm Spindle bore 103 mm Spindle nose Size 8, DIN 55026 Front spindle bearing Ø 150 mm Maximum chuck Ø 315 mm Spindle power 53 kW (50% duty) Maximum spindle torque 780 Nm Dsdpfezw D I Rex Al Ssku Spindle speed 30–3,000 rpm* Turret 12 positions Tool interface VDI 50, DIN 69880 Rapid traverse X/Z 10 m/min Maximum feed rate 10,000 mm/min Maximum feed force 15 kN Dimensions L × W × H approx. 5,400 × 3,200 × 2,400 mm Machine weight approx. 11,000 kg

Condition: excellent (used), functionality: fully functional, Intermediate conveyor belt / WEINIG, type LTB 250-3500, serial number 81005, year of manufacture 1997 - Length 3500 mm - Width 250 mm - Height 820-1000 mm - Feed rate 20 m/min - Anti-slip plate 3000 mm Dkjdpszxpfkofx Al Ssu - 2x pneumatic glass strip ejectors In very good technical and visual condition.