Used Ferag Jetfeeder Adapter for sale (4,781)

Condition: used, mileage: 312,255 km, power: 120 kW (163.15 HP), first registration: 03/2014, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: automatic, emission class: euro5, number of seats: 2, total length: 6,450 mm, total width: 2,080 mm, total height: 2,900 mm, Year of construction: 2012, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: 1 DIN slot in the front under the headliner, airbag on the passenger side, hill start assist, exhaust pipe in front of the rear axle on the left, exterior mirrors without integrated turn signal, outside temperature display, battery 100 Ah, additional battery (reinforced), battery disconnect switch 1-pole, turn signals in the front, roof console with reading light for driver/passenger side, door entry lights, additional main key, folding cover for storage compartment, programmable special module, spare wheel with Super-Single tire (235/65 R16), spare wheel holder under the frame end including jack, interior rearview mirror, rear wall with window, mud flaps in the front, seats in the cab: passenger seat comfort, seats in the cab: driver's seat comfort, reinforced rear stabilizer bar, reinforced front stabilizer bar, fuel level sensor for auxiliary heater, separator relay with additional battery, rear wall paneling, thermal insulation in the driver's cab, thermal protection glazing (windshield with band filter at the top), auxiliary heater (air) electric Additional equipment: Adaptive brake light, airbag driver side, display for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both, brake assist, braking system with ABS+ASR, roof lining in the cab, lockable glove compartment, body/structure: standard flatbed, fuel tank: main tank 75 liters, headlight range adjustment, truck registration, engine 2.1 liter - 120 kW CDI CAT, wheelbase 3665 mm, smoker's package, low emission according to emission standard Euro 5, safety belt system with warning system (driver side), seat cover / upholstery: fabric Lima, service interval display Assyst, permissible total weight 5.00 t, twin tires on 2nd axle / rear axle incl. stretcher from Stollenwerk, 1st hand * Rear axle air-suspended * Ambulance and rescue vehicle, box body * Body from Fahrtec Systeme * Adjustable floating table * Stretcher from Stollenwerk * Central locking for the patient compartment * Air conditioning KONVEKTA * 1 attendant seat * Cooler compartment * Warming cabinet * Sink * Medicine cabinets * Oxygen and suction preparation * 12 + 230 Volt sockets * Skylight * Exterior storage compartments * Rear wing doors with step * Side door with sliding window and step * All-round work lights * Partition with sliding window * Ambient lighting left, right and rear * 2x interior lights bright white and blue * Cab with 2 seats * 2x air conditioning front and rear * Automatic transmission * Telma retarder * Electric windows * Electric mirrors, heated Gedpfszpc S Ejx An Ioug * Searchlight * Daytime running lights * Driver and passenger airbags * ABS and ASR * Twin-tired rear axle * Extra pneumatically extendable step at the rear * Body dimensions: L=3.650 x W=1.900 x H=1.980 mm * Wheelbase: 3.650 mm * Permissible total weight: 5,000 kg * Unladen weight: 4,415 kg Good all-season tires from Conti, DOT 2024, with approximately 6.0 mm tread depth in the front and 5.0 mm in the rear Engine, automatic transmission and rear axle are dry The engine runs smoothly and the automatic transmission shifts cleanly Starter battery is new +++ Errors, changes and prior sale reserved

Condition: used, mileage: 189,000 km, power: 140 kW (190.35 HP), first registration: 08/2019, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 6,500 mm, total width: 1,950 mm, loading space length: 3,280 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: Towbar: Wiring for trailer socket, extended exterior mirror arm left/right, MBUX multimedia system (7" touchscreen), spare wheel with road tyres, spare wheel holder under rear frame incl. jack, cabin seats: comfort passenger seat, cabin seats: comfort driver's seat, jack. Additional equipment: Godpfx Anez Aq Syj Ioug Overhead storage compartment above windscreen, storage compartment below dashboard on passenger side, rear tow hook, adaptive brake light, driver's airbag, hill-start assist, traction control system (ASR), washer fluid level indicator, electrically adjustable and heated exterior mirrors (both sides), outside temperature display, brake assist, cabin roof lining, automatic driving light activation, electronic brake force distribution (EBV), driver assistance system: Crosswind Assist, body/chassis: standard flatbed, Keyless-Start, communication module (LTE) for digital services, fuel tank: main tank 71 litres, steering wheel (mechanically adjustable steering column), headlight range adjustment, truck registration, side marker lights, Mercedes-Benz emergency call system, engine 3.0 litre - 140 kW CDI CAT, wheelbase 4325 mm, low-emission according to Euro 6, seat belt system with warning device (driver's side), seat covers/upholstery: fabric, steel wheels 6.5x16, AGM battery 70 Ah, ASSYST maintenance interval indicator, heat-insulating glazing, permissible gross weight 3.50 t. Cargo area length: 3.28 meters Payload: 1000 kg Wheelbase: 4.35 meters The vehicle is in very good condition!

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Original META MULTIPAL S (MULTIPAL-S) pallet racking system / heavy-duty shelving for warehouses, industry, and logistics. With a height of 3.80 m, it is also ideal as a high-bay racking system. 9 frames – 40 crossbeams – Original META MULTIPAL – in top condition The system was used exclusively for storing musical instruments and accessories. As a result, it was only subjected to very low loads. It was well maintained and is overall in exceptionally good condition. The few minor signs of wear do not affect stability or function. The manufacturer, META, has confirmed based on the profile marking and the photos that this is an original META MULTIPAL racking system. Scope of delivery Guodpfxjzmu Ruo An Ijg • 9 × frames, height 3,800 mm • 40 × original META crossbeams • Field width: 3,600 mm • Shelf depth: 800 mm The racking system can be flexibly adapted to different storage requirements. Availability: immediately. Collection by prior appointment. Self-collection: The racking system will be completely dismantled by us and made ready for collection. The buyer is only responsible for loading and transport. There is a level truck access directly to the warehouse, which allows for easy loading. An inspection is possible at any time by prior appointment. Location: 45731 Waltrop Price: €3,990.00 net, negotiable, plus 19% VAT. An invoice with VAT will be issued. Type ID: 757 Type: MULTIPAL-S shelving If you have any questions or need more information, please feel free to send us a message or call us.

Condition: used, mileage: 815,432 km, power: 338 kW (459.55 HP), first registration: 10/2017, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 12/2025, color: green, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, * Engine number: 51548910984895 Technical data * Gross weight: 18,000 kg * 1st front axle: 7,100 kg * 1st rear axle: 11,500 kg (technical: 12,600 kg) * Wheelbase: 3,600 mm * Rear overhang: 800 mm * Engine: D2676LF52 – 460 HP / 338 kW, EURO6 SCR, 2,300 Nm, C-R OBD-C * Transmission: MAN TipMatic® 14 27 DD * Axle ratio: i = 2.71 * Front suspension: Parabolic 7.5 t * Rear suspension: Air, 13 t * Rear axle: Hypoid HY-1350 ----Vehicle Equipment * Steering: Left-hand drive * Fuel tank: Aluminum 390 L right side and 60 L AdBlue * Brake system: MAN BrakeMatic (Electronic braking system) * Differential lock: Rear axle * Wheels: Aluminum disc rims, 10-hole, 8.25-22.5 ALCOA Dura Bright EVO (spare wheel, 1st FA, 1st RA) * Digital tachograph: CONTI * Instrument panel: km/h 'High-Line' * Steering wheel: Height and tilt adjustable * Cruise control: Adaptive (ACC) * Emergency Brake Assist 2 (EBA2): Non-deactivatable * Anti-lock braking system (ABS) * Traction control system (ASR) * Electronic stability program (ESP) * Disc brakes: Front and rear axles * Digital axle load display (ALM): In cab for air-suspended axles * Compressed air connection: In cab * Compressed air hose and air gun * Insect protection grille: In front of radiator * Work platform: With step and grab handle * Tank caps: Lockable (fuel and AdBlue tank) * Air intake: Raised with dry air filter * Fine dust and pollen filter * Exhaust: Right side with ground discharge * Controlled rocker lever brake (EVBec) Gjdpozz Uyxsfx An Ijug * Variable speed control: Retarder functions * Flame start system * Rear axle vent: Raised * Underrun protection: Front * Steel bumper: Three-piece * Multifunction steering wheel: For cab 'L,LX,XL,XLX,XXL' * Rotating beacons: 2 halogen rotating beacons on cab roof (yellow) * Manoeuvring light: At entrance ----Cab * Type: High roof 'LX', 2,240 mm wide, 2,280 mm long * Seat covers: Comfort quality * Driver comfort seat: Air-suspended, lumbar support, shoulder adjustment, heating * Passenger seat: Static with storage compartment * Front flap: Unlockable from inside * Additional vehicle keys: 2 pieces * Door trim: Fabric * Cab suspension: Air-suspended * Air conditioning: AC R134A CFC-free with automatic temperature control * Interior lighting: Red/white in cab roof * Clock with alarm function: At sleeper berth * Sleeper berth: 1 sleeper berth with storage (aluminum frame), lower mattress * Cool box * Drawer: Pull-out in center console * Grab handles: Left and right ('A' and 'B' pillar) * Window lifters: Electric for driver and passenger * Sun blind: Windscreen (manual) and driver's door * Sun visor: In front of windscreen * Tilting/sliding roof: Electric ----Infotainment & Electronics * Radio: MAN Media Truck Advanced 12V with 7” color display and navigation preparation * Navigation SD: All of Europe * Hands-free function: "Comfort" for 2 mobile phones * Lane Guard System IV (LGS IV): Cannot be deactivated * MAN VideoView: Video input (1 camera) * Voice control: For infotainment system * AUX-in/USB: In dashboard * Ambient lighting * Central locking: With remote control * TollCollect preparation: Wiring harness & antenna ----Special features * Hydraulic system: MEILLER for tipper semitrailer, high pressure 275 bar / low pressure 150 bar * Fifth wheel coupling: JOST JSK 37 C185W, coupling height 185 mm (low maintenance) * Fifth wheel lead: 585 mm * Fifth wheel plate: 40 mm, manufacturer JOST ----Tyres * Front axle: 2 x MI 295/80R22.5 MW3DXZE TL 152/148 M * Rear axle: 4 x M

Condition: used, mileage: 158,000 km, power: 120 kW (163.15 HP), first registration: 04/2021, fuel type: diesel, overall weight: 3,100 kg, color: black, gearing type: automatic, emission class: euro6, number of seats: 9, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Special equipment: Trailer hitch: electrical system for trailer socket, armrests in the passenger compartment, audio navigation system Audio 40 (DAB+, Bluetooth, USB), increased gross vehicle weight to 3.2 t, DAB tuner (digital radio reception), driver assistance package, generator 250 A, automatic climate control for the rear (Tempmatik), comfort suspension, comfort lighting in the passenger/cargo compartment, fuel tank: enlarged, metallic paint, parking package, Parktronic system (PTS), seat configuration: quick-release mechanism for seat rail system (3 rails), seats in the driver's cabin: comfort driver's seat, seats in the cargo/passenger compartment: 1st row, 3-seater comfort bench, seats in the cargo/passenger compartment: 2nd row, 3-seater comfort bench, sun visors with mirror (illuminated), mirror package, exterior mirrors electrically foldable, interior mirror and exterior mirror on the left with automatic anti-glare function, steel rims 6.5x17, fuel filler cap red, tinted rear windows / black tinted glass, two-way speakers in the front Additional equipment: 3rd brake light, adaptive brake light, airbag on the passenger side, airbag on the driver side, display for windshield washer fluid level, exterior mirrors aspherical, both, exterior mirrors electrically adjustable and heated, both, outside temperature display, fastening rails for roof rack, BlueEfficiency package, start/stop system for the engine, floor covering: passenger compartment TPO, braking system with ABS+ASR, headliner, design and equipment line PRO, automatic activation of headlights, grab handle at the rear, driver assistance system: breakdown management, windows for rear doors / tailgate with wiper/washer system, windows in the cargo/passenger compartment: - fixed, rear, windows in the cargo/passenger compartment: - fixed, front left, windows in the cargo/passenger compartment: - fixed, front right, windshield with integrated antenna, cup holders in the front, seat belt pretensioners, grab handles on the A-pillars, grab handles in the rear, lockable glove compartment, urea tank (AdBlue): 24 liters, tailgate with window, heated rear window, rear window wiper, interior trim, high-quality version, body/superstructure: extra long, body/superstructure: standard station wagon, child safety lock, instrument cluster with pixel matrix display, communication module (LTE) for digital services, head airbag system (window bag), head-shoulder airbag (thorax bag) driver/passenger side, steering wheel (steering column mechanically adjustable), steering wheel with multifunction controls including trip computer, Mercedes-Benz emergency call system, model update, engine 2.0 L - 120 kW CDI CAT, rear fog lamp, passenger car registration, Pro, PTC heater, wheelbase 3430 mm, tires 205/65 R16C 103/101 T, interior rearview mirror, low emissions according to exhaust standard Euro 6d, sliding door cargo/passenger compartment right with window, seat belt system with warning system (driver/passenger side), seat belt system with warning system (passenger side), seat cover / upholstery: fabric Caluma, seats in the driver's cabin: passenger seat adjustable, ambient light in the tailgate, fleece battery 92 Ah, preparation for DAB radio reception, warm air duct to the cargo/passenger compartment, maintenance interval display Assyst, heat-insulating glazing Gujdpfx Ansz Al Hre Ijg Subject to prior sale, errors and changes.

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, operating hours: 13,863 h, screw conveyor diameter: 90 mm, screw conveyor length: 2,880 mm, Krauss Maffei twin-screw extruder KMD90-32 in very good condition for sale. The extruder comes from a technical center and has seen little use. Gujdpfxsz Ag Udj An Ieg These are the original operating hours (13,863) from the first owner. An inspection with a test run is possible at any time. Technical data: - Year of manufacture 2004 - Original operating hours: 13,863 - Standard screw profile with up to 390 kg output per hour - C4 control system - Internal screw temperature control, welded screw tips - Including hopper, adapter, sensors, etc. - Screws and cylinder are in new condition. The screws have been removed and can be inspected on-site. Loading with a forklift. Delivery, export documents or sea packaging available upon request.

Condition: used, Year of construction: 2005, functionality: fully functional, RAKO 12-Jaw Precision Clamping System Ø 1,600 mm with Extensive Jaw Set (2 units in stock) Manufacturer: RAKO GmbH, Gelenau Manufacturer's designation: 12-Jaw Chuck Year of manufacture: 2005 Documentation date: 2006 Drawing number: 0684.00-00 Article number: MPT-1023 / 1024 Offered is a used, stationary RAKO 12-jaw precision clamping system for mounting on a fixed machine table. The clamping system was used for machining brass cages for ball and roller bearings. It is not a conventional turning chuck for a machine spindle, but rather a permanently mounted workpiece clamping device. The design features twelve basic jaws arranged radially and evenly around the circumference. This distributes the clamping force over numerous contact points. This clamping principle is particularly suitable for large, ring-shaped, thin-walled, sensitive, or easily deformable workpieces. According to the existing manufacturer's drawings, different jaw positions are possible for internal and external clamping. The clamping system has an outer diameter of approximately 1,600 mm and a weight of approximately 2,000 kg. Scope of delivery - RAKO 12-jaw clamping system, Ø approx. 1,600 mm - twelve radially arranged basic jaws - extensive set of various clamping and adapter jaws - different interchangeable and clamping elements - additional fastening and accessory parts as shown in the images - separate wooden crate with jaws and accessories - original RAKO operating manual - overall, section, and detail drawings - drawings of various clamping positions The exact quantity and assignment of all jaws and accessories have not been finally determined. The scope of delivery is based on the images. Condition Used condition with signs of wear and tear due to age and use. Scratches, dirt, discoloration, and, in some places, slight surface rust or corrosion can be seen on the clamping system and individual accessories. Technical data - Outer diameter: approx. 1,600 mm - Weight: approx. 2,000 kg Gjdpfezx D A Djx An Ijug - Number of basic jaws: twelve - Jaw arrangement: radial and even - Clamping options: internal and external clamping - Jaw stroke: 28 mm according to drawing - Total clamping force: approx. 190 daN at 35 Nm actuating torque - Maximum torque on the actuating spindle: 100 Nm - Locking air: present - Maximum locking air pressure: 5 bar - Lubrication: on the twelve basic jaws and the actuating spindle - Transport: three threaded holes M30 for crane screws Mounting on the machine table According to the RAKO operating manual, mounting is done with 14 cylinder head screws M20 × 180 according to DIN 912, strength class 10.9. The specified tightening torque is 300 Nm. Jaws and accessories The scope of delivery includes an extensive range of different clamping and adapter jaws. Documented, among other things, is an adapter jaw H41 with drawing number 0721.02-03 and a finished size of 55 × 50 × 46 mm. Dimensions of clamping system: approx. 1,600 × 1,600 mm Height: to be determined Weight: approx. 2,000 kg Total shipping weight: over 2,000 kg plus accessories and packaging

Condition: used, This listing is for 1 of 2 QuattroFlow QF15PTIU Single-use Pump Diaphragm Pump. The unit is in full working condition and is ready for immediate release. The QuattroFlow QF 150 PTIU is an advanced single-use quaternary diaphragm pump tailored for biopharmaceutical applications, offering several notable features and benefits that enhance its functionality in sensitive environments. Here’s a detailed look at its specifications and advantages: Key Features and Specifications: Flow Rate: Operates within a range of 0.02 to 3.2 lpm (0.01 to 0.85 gph), making it highly adaptable for various bioprocessing tasks. Design: Utilizes a 4-piston diaphragm positive displacement system, which ensures total product containment. This design minimizes the risk of abrasion and particle shedding, crucial for maintaining product purity. Gsdpfoxxz Iwsx An Isug Materials: Constructed from disposable machined polypropylene, the pump is designed specifically for single-use applications, significantly reducing contamination risks. Control System: Equipped with an integrated controller, allowing for automated operation and precise control over pump functions, which enhances efficiency and consistency in processes. Certifications: Complies with USP Class VI and 3.1B standards, as well as CFR FDA regulations, ensuring it meets the stringent requirements for biopharmaceutical manufacturing. Applications: The QF 150 PTIU is versatile and suitable for various critical applications, such as: Filtration Systems: Ideal for use in Tangential Flow Filtration (TFF) setups, where it can efficiently process biological solutions. Chromatography Systems: Effectively manages the flow of reagents and samples during separation processes. Feeding Pumps: Provides reliable and consistent dosing in various bioprocessing applications. Virus Filtration: Plays a pivotal role in ensuring the safety of biopharmaceutical products by filtering out contaminants. Sterile Filtration: Maintains sterility in critical processing steps, essential for product integrity. Key Benefits: Total Product Containment: Ensures that no product is lost or contaminated during transfer, vital for high-value biopharmaceuticals. Low Pulsation and Low Shear Operation: These features preserve delicate biological materials and maintain their integrity throughout the pumping process. Variable Flow Rate: Allows for flexibility in operations, accommodating different process needs easily. Quiet Operation: Minimizes noise during operation, making it suitable for laboratory and clinical environments. CIP/SIP Capable: Facilitates easy cleaning and sterilization, ensuring high hygiene standards are maintained. Autoclavable: Supports sterilization processes, enhancing its usability in critical applications. Single-Use Design: Reduces maintenance requirements and downtime, allowing for efficient workflow in biopharmaceutical settings.

Condition: excellent (used), Year of construction: 2013, Sumitomo Demag Systec 100/420-310 with Sepro SR SDR11 S3 TRANS robot / Hybrid Machine Year of manufacture: 2013 Injection unit: Screw diameter: 35 mm Shot weight: 149 g Injection pressure: 2024 bar Dosage volume: 168 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Platen size: 600x600 mm Ejector: hydraulic Clamping unit: hydraulic Control system: NC5 Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Operating hours: approx. 38,000 h in automatic mode Gedpjzy Imisfx An Ieug Robot interface Air valve x 2 Hydraulic core pull x 1 Hardened injection unit - bimetallic Main motor of the machine - servo motor driven by inverter - energy saving Built-in printer Machine was regularly serviced by authorized Sumitomo Demag service Robot Sepro SR SDR11 S3 TRANS Year of manufacture: 2013 5-axis robot: 3 axes driven by servomotors (electric); axes A and C (rotation) - pneumatic Touch control panel Robot safety package Robot with adapter, safety enclosure Robot acquisition available at an additional cost Dimensions: Weight: 4400 kg Length/Width/Height: 4.20x1.40x2.00 m All machines offered are started up by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine, or to take part in technical live tests at our facility in Łódź. Price: On request

Condition: used, mileage: 235,213 km, power: 120 kW (163.15 HP), first registration: 07/2016, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 6,450 mm, total width: 2,080 mm, total height: 2,900 mm, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: 1 DIN slot in the front below the headliner, airbag on the passenger side, hill start assist, exhaust pipe in front of the rear axle on the left, exterior mirrors without integrated turn signal, outside temperature display, 100 Ah battery, additional (reinforced) battery, 1-pole battery disconnect switch, turn signals in the front on the side, roof control unit with reading spot for driver/passenger side, door entry lights, additional main key, folding cover for storage compartment, configurable special module, spare wheel with Super-Single tire (235/65 R16), spare wheel holder under the end of the frame including jack, interior rearview mirror, rear wall with window, mud flaps in the front, seats in the cab: passenger seat comfort, seats in the cab: driver's seat comfort, reinforced rear stabilizer, reinforced front stabilizer, fuel gauge for auxiliary heater, separating relay with additional battery, rear wall trim, thermal insulation for the driver's cab, heat-protective glazing (windshield with band filter at the top), auxiliary heater (air) electric Additional equipment: Adaptive brake light, airbag on the driver's side, display for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both, brake assist, braking system with ABS+ASR, roof lining in the cab, lockable glove compartment, body/superstructure: standard platform, fuel tank: main tank 75 liters, headlight range adjustment, truck registration, engine 2.1 liters - 120 kW CDI CAT, wheelbase 3665 mm, smoker's package, low emissions according to Euro 5 emission standard, safety belt system with warning system (driver's side), seat cover/upholstery: fabric Lima, service interval indicator Assyst, permissible total weight 5.00 t, twin tires on 2nd axle/rear axle including stretcher and carrying chair, Stollenwerk, 1st hand * Rear axle with air suspension * Ambulance and rescue vehicle with box body Gjdpfezn Emiox An Isug * Superstructure by Fahrtec Systeme * Adjustable floating table * Central locking for the patient compartment * KONVEKTA air conditioning * 1 attendant seat * Refrigerator compartment * Warming cabinet * Sink * Medicine cabinets * Oxygen and suction prepared * 12 + 230 volt sockets * Skylight * Exterior storage compartments * Rear wing doors with step * Side door with sliding window and step * All-round work lights * Partition with sliding window * Ambient lighting on the left, right and rear * 2x interior lighting bright white and blue * Cab with 2 seats * 2x air conditioning in the front and rear * Automatic transmission * Telma retarder * Electric windows * Electrically adjustable and heated mirrors * Searchlight * Daytime running lights * Driver and passenger airbags * ABS and ASR * Twin-tired rear axle * Extra pneumatically extendable step at the rear * Superstructure dimensions: L=3.650 x W=1.900 x H=1.980 mm * Wheelbase: 3.650 mm * GVWR: 5,000 kg * Unladen weight: 4,415 kg Good all-season tires from Conti with DOT 2024 with approximately 6.0 mm tread depth all around Engine, automatic transmission and rear axle are dry The engine runs smoothly and the automatic transmission shifts cleanly Starter battery is new +++ Errors, changes and prior sale are reserved.

Condition: used, mileage: 186,000 km, power: 120 kW (163.15 HP), first registration: 06/2021, fuel type: diesel, overall weight: 2,800 kg, color: grey, gearing type: automatic, emission class: euro6, number of seats: 2, Year of construction: 2021, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), soot filter, Special equipment: Audio system Audio 30 (DAB, Bluetooth), equipment package: Easy Cargo, cargo compartment partition with window, wooden floor in the cargo compartment, lining in the cargo/passenger compartment: plywood, rear door without glazing (opening angle 270 degrees), LED cargo compartment light, rail system for load securing, exterior mirrors electrically adjustable and heated, both, DAB tuner (digital radio reception), automatic activation for headlights, steering wheel (steering column mechanically adjustable), steering wheel with multi-function including trip computer, parking package, Parktronic system (PTS), spare wheel holder under the end of the chassis including jack, seats in the cab: passenger seat as a double seat, seats in the cab: driver's seat heated, seats in the cab: driver's seat comfort, special paint, fuel tank lid red, heat-insulating glazing, two-way speakers in the front Guedpfx Anoz Al Hfs Isg Additional equipment: 3rd brake light, adaptive brake light, airbag on the passenger side, airbag on the driver's side, exterior mirrors, aspherical, both, outside temperature display, fastening rails for roof rack, BlueEfficiency package, start/stop system for engine, design and equipment line Base, driver assistance system: breakdown management, windshield with antenna, generator 200 A, speed limiter system 210 km/h, cup holders in the front, seat belt pretensioners, lockable glove compartment, body/superstructure: extra long, body/superstructure: standard panel van, communication module (LTE) for digital services, fuel tank: main tank 57 liters, load securing/tie-down points, Mercedes-Benz emergency call system, model update, engine 2.0 L - 120 kW CDI CAT, rear fog light, wheelbase 3430 mm, low emissions according to exhaust standard Euro 6d-TEMP, sliding door cargo/passenger compartment right, safety belt system with warning system (driver/passenger side), safety belt system with warning system (driver side), safety belt system with warning system (passenger side), seat cover/upholstery: fabric, steel rims 6.5x17, trim on window pillars, lining in the cargo/passenger compartment: hard fiber, semi-high, fleece battery 92 Ah, service interval indicator Assyst, permissible total weight 2.80 t Subject to prior sale, errors and changes.

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Condition: Good (the machine has undergone extensive maintenance every year, most recently in March 2026!) Equipment: - iTronic – Adaptive pressure and glue quantity control with automatic, program-dependent fine adjustment - MOT SPS adjustable infeed fence - Automatic chain lubrication: Intelligent automatic transport chain lubrication - Edge Control 19 control system - EL GRM variable, 400V 50Hz, 2.2kW V2 SPRINT 1329 PERFORMANCE 400V 50Hz - Edge Control 19 control system with 18.5" touchscreen color display, 16:9 format - ECO MODE energy-saving mode: An automatic standby circuit - Jointing unit 1802 (2 x 2.0 kW, 200 Hz, 12,000 rpm) with 2 milling units for jointing panel edges - Diamond cutter, Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation, Air Stream System (HOLZ-HER / LEUCO Patent) - Diamond cutter, Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation, Air Stream System (HOLZ-HER / LEUCO Patent) - Edge feed 1901 SYNCHRO: automatic transport of coil and strip material - Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) - DW501 SPS motorized SPRINT - GM501 spray device after the printing unit with lubricant (recommended for high-gloss edges) - End trimming unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12,000 rpm) pneumatically tiltable 0/10° - Milling unit FR701: 100% repeat accuracy at the push of a button due to backlash-free mechanics - Air Stream System multi-cutter, diamond Ø 70.9 x 16 mm, Z = 2+2 - Form milling unit FF701: 100% repeat accuracy at the push of a button due to backlash-free mechanics - Diamond cutter, Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4, radius R = 2 mm, left-hand rotation with CM technology - Diamond cutter, Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4, radius R = 2 mm, right-hand rotation with CM technology - Scraper unit 1929 MOT4 incl. high-gloss package with motorized adjustment of the tracing rollers - HW reversible knives for scraper holder, R = 2.0 mm (2 pcs. required) - Flat scraper FK701 with pre- and post-sensing for removing adhesive residue - TR501 spray unit for infeed and outfeed (separating and cleaning agent) - Includes nesting shoes below with their own spray unit Location: Hesse Availability: Approx. July 2026 Gsdpfx Aozpzy Ijn Isug

Condition: used, mileage: 28,000 km, power: 63 kW (85.66 HP), first registration: 07/1979, fuel type: diesel, overall weight: 6,500 kg, next inspection (TÜV): 07/2027, color: red, gearing type: mechanical, number of seats: 9, total length: 6,000 mm, total width: 2,370 mm, total height: 2,750 mm, loading space length: 2,730 mm, loading space width: 2,270 mm, loading space height: 1,630 mm, Year of construction: 1979, 1st owner. Meticulously maintained and thoroughly restored vintage vehicle. Registered until 2026 and part of the regular fleet of a German industrial operation. Always parked in a modern heated fire station and regularly driven. The Mercedes was completely overhauled and repainted in 2002. Technical inspection (TÜV) valid until 07/2027, renewed just 130 kilometers ago. Gujdpfey Euw Ujx An Iog LF8 fire engine with ZIEGLER body and front-mounted FP8/8 pump. WITHOUT fixed water tank! OM314 industrial diesel engine with 3,758 cc displacement. 5-speed manual transmission. Top speed: 82 km/h (no faster, but you always reach your destination reliably, no matter how long the journey). Large crew cabin. 9 seats. 4 doors. Storage compartments under the rear benches, charging trays for hand lamps, shore power connection for battery maintenance. Registered unladen weight: 4,070 kg. (Cannot be reduced further, as trucks of this era were simply built sturdier and with more materials!) Gross vehicle weight: 6,500 kg. Tires from 2013, winter tires 8R17.5, almost full tread and not cracked, in good condition. 1 spare wheel mounted on the roof. Modern rearview camera with monitor retrofitted. Two tow hitches: 1. Ball hitch for passenger car trailers. 2. Small pintle hook. Drawbar load: 150 kg and towing capacity: 1,500 kg. These values apply for both braked and unbraked trailers. This LP is in particularly good original condition, starts immediately and runs perfectly. Countless new parts and all necessary investments have been made in this truck to the very end. In recent years, for example, the fuel tank has been replaced, brake system overhauled, starter batteries (2024), and the gearbox fully rebuilt. A partial set of equipment is included in the sale, at no extra cost: 4-part aluminum extension ladder, suction hoses, adapters, suction strainers, multi-purpose nozzles, hose bridges, breaker hooks and axes, 1,500-watt spotlight, first aid kit, and small parts. Vehicle is immediately ready for operation, regularly serviced, no oil leaks, no repair backlog—a fine vintage truck without power steering and without seatbelts. Classic truck driving as it used to be. This offer is valid only for business customers, freelancers of any kind, and public authorities / emergency services. We do not generally sell to private end users. Subject to prior sale and possible errors at any time. The net price for this beautiful LP 709 is €7,900.00.

Condition: new, Dataman Profibus Adapter DMA-CONV-PB-000 COGNEX Gujdpszlt U Nofx An Iog

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,600 mm, Travel ranges: Longitudinal (X): 4000 mm Vertical (Z): 1600 mm Lateral (Y): 1300 mm Rotary table: Diameter: 1600 mm Maximum speed: 250 min⁻¹ Drive power (100% duty cycle): 53 kW Maximum transport load (positioning): 8000 kg Maximum transport load (rotation): 3000 - 8000 kg Work table: Length: 4000 mm Width: 1240 mm Height of work table: 760 mm Automatically indexing milling head: Tool interface: ISO 50, DIN 69871 AD Automatic tool clamping: Clamping force 20000 N Spindle speed range: Spindle speed: 20 - 5000 min⁻¹ Gusdpfx Anjzi S E Ue Iog Full power from 340 min⁻¹ Torque at 32 kW/S1: 900 Nm Main drive: Drive power: 43 kW Maximum rapid traverse rate: X-axis 45000 mm/min Y- and Z-axis 35000 mm/min Maximum feed force: X, Y and Z-axis 16000 N Automatic tool changer Magazine positions in M version: Maximum tool positions: SK 50 40 positions Maximum tool positions: Capto C8 20 positions Machine weight: approx. 32,100 kg Equipment: - Work table 4000 x 1240 x 760 mm with integrated rotary table Ø 1600 mm - Swiveling control panel with telescopic arm with HEIDENHAIN TNC 640 HSCI (6 axes + spindle) control, including 19" flat screen, metallic keyboard with integrated mouse and USB interface on the control panel. Processor speed 0.5 ms including HEIDENHAIN smarT.NC. - Interpolative turning with HEIDENHAIN TNC 640 HSCI consisting of CAM system, HEIDENHAIN postprocessor, software adaptation for C-axis (spindle). - Portable electronic hand-held unit HEIDENHAIN HR 520 with 5 m cable. - Automatically indexing milling head / 2 levels with 2.5° x 2.5° division and a tool clamping force of 20,000 N (H200), 32 kW / 900 Nm, tool interface ISO 50 - DIN 69871 AD. Mounting flange with Hirth gearing for adapting turning tool holders, grinding spindles or additional milling heads and a protective ring to cover the Hirth gearing; not required if H205 is selected. - Spindle drive 43 kW at 100% duty cycle via water-cooled HEIDENHAIN inline motor with direct power transmission. The motor is integrated into the milling slide. - Turning tool holder with Capto C8 interface (manual tool clamping) for turning operations incl. Hirth gearing and SK 50 interface according to DIN 69871 AD for adaptation to SORALUCE milling heads. (Semi-automatic changing with additional manual fastening by 8 x M8 screws); not required with fully automatic changing of the turning tool holder. - Pneumatically adjustable pick-up station (travel 500 mm) in the tool changer area for the turning tool holder and protective ring for semi-automatic changing. - Work table with integrated NC rotary table Ø 1,600 mm, for turning operations and for positioning operations with hydraulic clamping. - Rack and pinion drive in the X-axis via two servomotors controlled in a master-slave process.

Condition: like new (used), Year of construction: 2021, operating hours: 20 h, functionality: fully functional, machine/vehicle number: SYSTEM ATBF170, The burger forming machine (for burger products with a diameter of 38 - 170 mm and a height of 7 - 30 mm) including the UNIVERSAL CONVEYOR BELT UTV-200/1500 was newly purchased in 2021 as a backup for an identical machine already in use. It was only set up and then operated for just one day. Therefore, the machine is practically new and ideally suited for producing patties, oval, round, or square-shaped nuggets. The forming machine is fed by a vacuum filler, which is not included in the price. The machine is currently set to a capacity of 3,000 patties in an 8-hour shift. It can most likely handle even more. - Pneumatic operation - Ejection plate with water spray system - Synchronous control, 24 V connection Gjdpfxjzhnwde An Isug - Compressed air: 10 m³/h, 6 bar - Portioning output: approx. 100 portions/min. (product-dependent) - Includes 1 base frame - Without forming insert - Without ejector - Ejection: one-way UNIVERSAL CONVEYOR BELT UTV-200/1500: with additional adapter Connection voltage: 1 x 230 V AC Connection power: 0.5 kW Rated connection frequency: 50 Hz Length: 1500 mm Width: 200 mm

Condition: good (used), functionality: fully functional, Year of construction: 2016, laser power: 3,000 W, TruLaser Tube 5000 fiber (T06) X Working area max.: 6500 mm Y Working area max.: 200 mm Laser power: 3000 Watts Control system: SINUMERIK 840D SL Standard equipment Machine - Machine table for automatic loading up to 6.5 m - Max. outer diameter of the circle: Round tube up to 152 mm, Rectangular tube up to 170 mm - LoadMaster tube 6.5 m with grouping chamber - Part removal station for 3 m finished part length (incl. scrap conveyor with container) - Part stacking station (with conveyor table and conveyor table extension) - NitroLine - FocusLine - Laser power control - Programmable cutting gas - Automatic start/stop system - Work area lighting Laser - Solid-state laser TruDisk 3001 with one laser output - Maintenance log function - Laser chiller Cutting unit - Lens cutting head with 150 mm focal length - ControlLine Control system - Sinumerik 840DSL - Remote maintenance interface Data transfer - USB interface - RJ45 network interface Guodpfozv Tnwsx An Ijg Safety - CE certification - Light barriers - Compact dust extraction system (1500 Nm*/h) - Protective housing with certified safety panes Service - Network installation via teleservice Additional machine equipment - SeamLine Tube with inner detection - Adaptive clamping technology - Adaptive clamping feeding station - Adjustable feed chuck - Chip conveyor, longitudinal - Technology package for bevel cutting Automatic LoadMaster Tube 6.5 m - LoadMaster Tube 6.5 m at the rear - LoadMaster Tube 6.5 m tube diameter 15 mm - Unloading station 4.5 m - 1 set of clamping jaws - 1 set of guide rollers - Various support sets for round and rectangular tubes

Condition: used, This listing is for the Labnet Spectrafuge 24D centrifuge The unit is in full working condition and is ready for immediate use The Spectrafuge 24D is a compact benchtop centrifuge designed for the efficient separation of a wide range of research samples. Its small footprint makes it ideal for laboratories with limited bench space, while offering the performance and flexibility needed for micro-volume processing. Key Specifications Maximum Speed: Up to 13,300 rpm Maximum RCF (Relative Centrifugal Force): 16,300 × g Capacity: 24 x 1.5/2.0 mL microcentrifuge tubes Motor: Brushless—requires no routine maintenance Timer: Adjustable from 1 to 30 minutes; supports continuous or pulse operation Rotor Type: Easy-access 24-place aluminum rotor, included Adapters Available: For tubes smaller than 1.5 mL (0.5 mL, 0.4 mL, 0.2 mL) Cooling System: Multi-flow air cooling; maintains ambient temperature and is safe for use in cold rooms Guedpfxjxv Dhne An Isg Control Interface: Digital microprocessor with LED displays; parameters set using two intuitive smart knobs Memory Function: Remembers last run settings Quiet Operation: Engineered for minimal noise Dimensions: 23.5 x 29.2 x 21.6 cm Weight: 8.1 kg Power Supply Options: 120V, 50/60 Hz, 200W, 2.6A (North America) 100V, 50/60 Hz, 190W, 2.7A (Japan) 230V, 50/60 Hz, 170W, 1.2A (Europe/UK)

Condition: ready for operation (used), Year of construction: 2018, operating hours: 131 h, This RETHINK Robotics Sawyer was manufactured in 2018. It features a Schunk gripper arm with an adapter plate and was used only for testing. With a maximum reach of 1260 mm and a handling weight of up to 4 kg, it has accumulated only 131 machine hours and 18 runtime hours. Contact us for more information about this machine. Gusdozvu N Njpfx An Ieg Machine Benefits Technical Machine Benefits • Max reach: 1260 mm / max handling weight: 4 kg • Scope of delivery: schunk gripper arm with adapter plate • Used for testing purposes only.

Year of construction: 2021, operating hours: 60 h, condition: good (used), functionality: fully functional, machine/vehicle number: X620DM-WL, We are selling a very good endoscope. As plant engineers, we used the device for endoscopic inspection of weld seams in piping systems. It delivers excellent image quality and is very easy to operate. Unfortunately, the 2-meter probe length is no longer sufficient for our needs, so we need to sell it and purchase a new one with a longer probe. The device is only 3 years old. Details from the order confirmation: Portable Video Endoscope VTec X Series Forward or side view, white light State-of-the-art CMOS camera technology Bright high-resolution 5.5" monitor integrated into the handset Specifications: Probe diameter: 6.1 mm +0.1 Probe length: 2.0 m Viewing direction: 0° / 90° Depth of field: 7 - 80 mm / 3 - 30 mm Field of view: 100° / 90° Illumination: White light Front LED, 3.22 lm Side LED, 6.45 lm Camera resolution: Front: 1280 x 960 pixels Side: 1280 x 960 pixels Monitor resolution: 1920 x 1080 pixels Bending angle: ≤ 150° ±10 Bending functionality: Controlled via 4-way motorized joystick Power supply: Four Li-Ion batteries (18650) with protection circuit or via power adapter Environmental conditions, protection class, and weight: Handset: -10°C to +50°C, IP 54, 1.50 kg Probe: -20°C to +70°C, IP 67 Included in delivery: Video Endoscope VTec X620DM-WL SD-USB card reader HDMI cable Mini USB data cable including USB power adapter Battery charger including power adapter Power adapter Four Li-Ion batteries (18650) with protection circuit User manual Transport case Rigid Shaft Adapter with Handle for 6 mm Video Endoscopes Working length of shaft: 350 mm Includes mount for 1/4" tripod thread Gedju Ul A Njpfx An Ieug

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, overall weight: 40 kg, load capacity: 10 kg, controller model: R-30iB Mini Plus, The FANUC CRX-10iA is a modern, collaborative lightweight robot (cobot) characterized by ease of operation, high reliability, and maximum safety. Combined with the powerful R-30iB Mini Plus controller, this system provides a flexible and cost-effective solution for diverse automation tasks in both industrial and craft sectors. With a payload of up to 10 kg and a reach of 1,249 mm, the CRX-10iA is ideal for applications such as machine tending, assembly, material handling, packaging, palletizing, or quality inspection. Thanks to its integrated safety features, the robot can operate directly alongside human workers without a safety fence (depending on risk assessment). Programming is intuitive, either via the user-friendly touch tablet or guided by hand (drag & drop function). Even users without in-depth robotics knowledge can rapidly create and adapt programs. Proven FANUC technology ensures the highest precision, repeatability, and a long service life. Technical Highlights: Godpfey Hp I Dsx An Ioug - Payload: 10 kg - Reach: 1,249 mm - 6 axes - Repeatability: ±0.04 mm - Protection class: IP67 (robot arm) - Collaborative operation with integrated force and torque monitoring - R-30iB Mini Plus controller with a modern user interface The FANUC CRX-10iA stands out with its fast commissioning, low maintenance requirements, and flexible deployment options. It is ideal for companies looking to efficiently automate production or optimize existing processes.

Condition: used, maximum load weight: 29,441 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 05/2023, next inspection (TÜV): 05/2024, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, * Fifth wheel height 1120 * Side loading height with lifting roof and interior height 2750 2655 mm * Side loading height without lifting roof and interior height 2750 2610 mm * Total length 13830 mm * Platform interior length 13620 mm * Total width 2550 mm * Platform interior width 2480 mm * Interior width between stanchions 2480 mm * Interior width between longitudinal members (without lifting roof) 2480 mm * Interior width between longitudinal members (with lifting roof) 2430 mm * Neck height 105 mm * Axle spacing 1310 mm * Axle spacing kingpin 1st axle 6390 mm * Technically permissible total weight 42000 kg * Technically permissible axle load 9000 kg * Technically permissible fifth wheel load 15000 kg * External height 3975 mm * Empty weight 6559 kg * Railway code certificate P386 Chassis Godpfjrvu Nzex An Ieug Steel lamp holder 19 pairs of lashing rings Floor made of screen-printed plate 30 mm Load capacity 7.5 tonnes + steel checker plate at the rear approx. 270 mm deep Rollers Ram buffer at the rear (WIELTON) Pallet stop with lashing holes Steel rear underrun protection Composite - side impact protection Liftable rear underrun protection Axles and suspension Number of axles 3 Rigid axles SAF disc axles 3x9000 kg 22.5 INTRADISC KNORR clamps Brake discs diameter 430 mm Fifth wheel height 1120 Hubodometer Support legs SAF Hercules 2-speed gearbox supports, full load Rims 6x steel rims 22.5-11.75 ET-120 Protective caps for wheel nuts Tires 6x tires 385-65-22.5 Other chassis equipment TIR sign, foldable Tensioning belt with ratchet 7 tons - 8 pieces Fire extinguisher 6 kg Ship fastening straps 4 pairs Two wedges with fastening A-sign, foldable ADR sign, foldable Fire extinguisher box on the front wall Tool box - 165L Railway coding number P 386 F1 Side loading height i.L.: 2,530 mm F2 Internal height i.L. under roof: 2,575 mm Construction Lifting roof (0, +50) Top slats - 7 rows Side tarpaulins with eyelets (at least 24 tarpaulin tensioners) Tarpaulin tensioning device at the front secured with a flap and customs rope (TIR version) Tarpaulin tensioning device at the rear Tarpaulin tensioner with additional lock Customs version on the outer frame with safety lock Sliding roof on one side from back to front EDSCHA HYBRID (TIR version) Aluminum bulkhead with customs eyelets Rear wall as aluminum double-wing door Screen-printed plate 6 mm H=1500 mm 2x transparent tarpaulin pockets for ADR labels Painting of other equipment 2-sided painting (powder coating) bulkhead, doors, corner stanchions Additional painting - color RAL5002 (ultramarine blue) Electrics 2x7-pin + 1x15 pole with EBS connection, without connecting cables to the tractor unit Lighting Hella LED EASYCONN version Rail / Intermodal equipment consisting of Axles with extended air bellows and adaptation of piggyback frame with gripper edges in accordance with Bach specifications Railway coding number P 386 Roller ram buffers at the rear, right and left RoRo Ferry Lashings Intermodal 5-fold ILU code, attached to the tarpaulins on the left and right, on the front wall, on the rear wall and on the roof Positions marked in yellow on the side in the area of the gripper edges (Rail) Side tarpaulins with 24 tarpaulin tensioners in accordance with railway specifications (Complies with the DAIMLER load securing guideline DL 9.5) Roof tarpaulin in accordance with railway specifications All information without guarantee. Errors subject to change. Subject to prior sale.

Condition: used, mileage: 118,050 km, power: 105 kW (142.76 HP), first registration: 01/2019, fuel type: diesel, overall weight: 3,190 kg, color: red, gearing type: automatic, emission class: euro6, number of seats: 8, total length: 5,932 mm, total width: 2,020 mm, total height: 2,360 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal vehicle no.: 8975X ----Why autonext? Over 400 immediately available cars & commercial vehicles One of the largest vehicle exhibitions in the region Over 1,000 satisfied customers annually - Top customer ratings Attractive financing & trade-in options Entire vehicle range available at autonext? Mobility made easy. WhatsApp chat: ### Offer: Financing from 4.99% ### ----1st owner, German vehicle, non-smoking vehicle Complete service history, exclusively at Mercedes Benz Next service in 462 days New brakes front and rear Adapted for disabled use Wheelchair ramp Wheelchair securing system Automatic transmission Number of seats: 8 Auxiliary heating Electr. side step Rear view camera Navigation system Air conditioning ---- Special features: * Multimedia system MBUX (touchscreen 7") * Bluetooth hands-free system * Multifunction steering wheel * Parking package with rear view camera * Rear view camera * 2nd battery (additional battery) interior * Windows in loading/passenger compartment: - sliding, rear left * Hold function * Folding cover for storage compartment * Regulated air conditioning (Tempmatik) * Navigation system for MBUX multimedia system * Full wheel covers * Mud flaps rear * Mud flaps front * Safety belt system with warning system (passenger side) * Seat features: Comfort headrest, passenger seat * Seat features: Comfort headrest, driver's seat * Seats in loading/passenger compartment: 1st row, 3-seater bench, narrow * Seats in loading/passenger compartment: 2nd row, 3-seater bench * Separating relay for additional battery * Rear door step * Tinted rear windows / black tinted glass * Additional turn signal lights rear (roof) * Additional heater (air) with timer Standard features: Guedewg Sxfspfx An Iog 3rd brake light, storage compartment above windshield, storage compartment below dashboard passenger side, storage: luggage net on rear doors, storage net on front seat backrest left, storage net on front seat backrest right, towing eye rear, adaptive brake light, airbag passenger side, airbag driver side, hill start assist, anti-lock braking system (ABS), traction control system (ASR), drive type: rear-wheel drive, display for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both, outside temperature display, body type: station wagon, brake assistant, roof lining, roof lining in cab, automatic activation of headlights, electronic brake force distribution (EBV), electronic stability program (ESP), driving assistance system: side wind assist, windows for rear doors, window in loading/passenger compartment: - fixed, rear left, window in loading/passenger compartment: - fixed, rear right, window in loading/passenger compartment: - fixed, front left, window in loading/passenger compartment: - fixed, front right, power windows electric 2-way, transmission automatic GTronic - (7-speed), heated rear window, rear door (opening angle 180 degrees), body/structure: station wagon, keyless start, child lock, comfort suspension, communication module (LTE) for digital services, fuel tank: main tank 71 liters, plastic floor in loading/passenger compartment, steering wheel (steering column mechanically adjustable), headlight range adjustment, side marker lights, Mercedes-Benz emergency call system, engine 2.1 liters - 105 kW CDI CAT, particulate filter, passenger car approval, wheelbase 3665 mm, tire pressure monitoring system, interior rear view mirror, low emissions according to emission standard Euro 6, sliding door loading/p

Condition: used, Year of construction: 1958, For sale: an industrial filling and dispensing machine from Gebrüder Höller Maschinenfabrik, Type MB, designed for dispensing and packaging granular and pelletized products. Key information: Manufacturer: Gebrüder Höller Maschinenfabrik Model/Type: MB Application: granular/pelletized products The machine features a robust, mechanical industrial design and is equipped with a large hopper with a mixing system, as well as an extensive dispensing and packaging mechanism. Guodszumk Ajpfx An Isg Equipment visible on the machine: large hopper/feed bin, mixer in the hopper, mechanical dispensing system, product feeding system, mechanical packaging system, electric main drive, gears and mechanical drive transmission system, control panel, adjustable working elements, heavy-duty, stable industrial construction. After appropriate adjustment and adaptation to the specific product and packaging type, the machine can be used to package various types of bulk, granular, and pelletized products. Condition: Used machine, in the condition shown in the current photos. Visible signs of use, scratches on the paint coating, and localized corrosion marks typical of long-term operation of an industrial machine. The machine is complete as shown in the photographs. It is currently placed on a pallet and prepared for transport. Options: personal inspection of the machine, obtaining additional information, arranging loading and collection terms. Sales conditions: Selling price: 15,000 EUR Machine available immediately. We invite companies interested in purchasing an industrial filling and dispensing machine to contact us.

Condition: like new (used), Year of construction: 2017, functionality: fully functional, Manufacturer KELCH GmbH, Weinstadt, Germany Type / Model KENOVA set line V646M Year of manufacture 2017 Design Vertical tool pre-setting and measuring device Measuring range Diameter X up to approx. Ø 430 mm (V6 series) Extended X range up to approx. -100 mm (V6 series) Measuring length Z, depending on V6 version, approx. 800 mm Repeatability of camera approx. ± 2 μm (series specification) Measuring system Optical camera system / CCD camera Optics Telecentric lens; features depend on version Tool holder Modular precision spindle; adapter depends on features Possible holders e.g. SK, HSK, PSC, VDI with matching inserts Positioning Coarse and fine positioning in X/Z, depending on features Operation A KELCH pico control terminal can be seen in the photo Mains voltage 90-260 V Mains frequency Gjdpfx Aszw Ef Ron Ijug 50-60 Hz Maximum power consumption 1000 VA Marking CE / Made in Germany