Used Fintek Amh 2025 for sale (1,815)

Condition: like new (used), Year of construction: 2015, operating hours: 7,366 h, load capacity: 1,600 kg, lifting height: 3,140 mm, fuel type: diesel, mast type: duplex, construction height: 2,120 mm, Manufacturer + Model: LINDE E 16 PL - 386 * EX * Proplan 2G / Zone 1 Mast: 2F3140 ID: 25012.5143 Category: Used Nwodpfxezutu Uo Aazsl Mast: 2F Lowered Height: 2,120 mm Lifting Height: 3,140 mm Capacity: 1,600 kg Year: 2015 Operating Hours: 7,366 h Battery: Completely NEW * 48v/625Ah * Year 2025 Options: CONTAINER specification!! * EX * Proplan!!!!! System = INERIS 08 ATEX 3022 X Gas group = IIB Type = Cat 2G (approved for ZONE 1 and 2) Temperature class = T4 Equipped with: - Complete road lighting - Additional spotlights - Joystick control forwards/backwards - 2D - FFL mast - New tyres (ATEX specification)

Condition: like new (used), Year of construction: 2013, operating hours: 34 h, load capacity: 1,800 kg, fuel type: electric, Manufacturer + model: LINDE T 18 * EX * Pyroban - 3G / Zone 2 - RAVAS system ID: 24032.0261 Category: Demo Forks: 1150 x 685 mm Capacity: 1800 kg Year: 2014 Operating hours: 34 hours Battery: Complete NEW * 24v / 230Ah * Year 2025 Options: * EX * Atex - Pyroban!!!! System = S6000 E Gas group = IIB Type = 3G (approved for ZONE 2) Temperature class = T3 Nsdpfozutznox Aazswl Equipped with RAVAS system

Condition: like new (used), Year of construction: 2016, operating hours: 6,368 h, load capacity: 1,600 kg, lifting height: 3,140 mm, fuel type: electric, mast type: duplex, construction height: 2,120 mm, Manufacturer + model: LINDE E 16 PL - 386 / 02 evo * EX * Proplan 2G / Zone 1 Mast: 2F3140 ID: 25072.7896 Category: Used Mast: 2F Lowered height: 2120 mm Lifting height: 3140 mm Capacity: 1600 kg Njdpfx Aszv Rxmjazowl Year: 2016 Hours: 6368 hours Battery: Complete NEW * 48v/ 625ah * Year of manufacture 2025 Options: CONTAINER specifications!! * EX * Proplan !!!!! System = INERIS 08 ATEX 3022 X Gas group = IIB Type = Cat 2G (permitted in ZONE 1 and 2) Temperature class = T4 Equipped with: - Complete street lighting - Spotlights - Joystick control for forward/reverse - 2D - FFL mast - New tires (ATEX specifications)

Condition: like new (used), Year of construction: 2018, operating hours: 214 h, load capacity: 2,000 kg, lifting height: 4,000 mm, fuel type: electric, mast type: triplex, construction height: 1,920 mm, Manufacturer + model: LINDE L 20 AS (1173) *EX* Proplan 2GD / Zone 1-21-22 * Mast: 3F4000 ID: 26064.5442 Cat.: Demo Mast: 3F4000 Lowered height: 1920 mm Lifting height: 4000 mm Capacity: 2000 kg Year: 2018 Hours: 214 hours Capacity: Complete NEW * 24V / 315Ah * Year of manufacture 2025 Options: *EX* Proplan !!!!! System / Certificate = EPS 16 ATEX 1137 X Gas group = IIB Type = Cat 2G (allowed in ZONE 1 and 2) Temperature class = T4 Nedpfx Ajzv R Aroazjwl ===== Dust group = IIIC Type = Cat 2D (allowed in ZONE 21 and 22) Temperature class = T 120*C ===== Very UNIQUE explosion-proof ATEX “DEMO” wide-track forklift - with cantilevered, adjustable forklift forks - also equipped with ADJUSTABLE support legs POWER STEERING – Complete, LIKE NEW!!

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 1,200 kg, lifting height: 4,300 mm, fuel type: diesel, mast type: telescopic, construction height: 1,920 mm, power: 26 kW (35.35 HP), fork length: 1,200 mm, empty load weight: 2,750 kg, total length: 3,470 mm, drive type: Diesel, construction width: 1,490 mm, Telescopic forklift, rigid Load center: 500 Fork width: 100 mm Fork thickness: 40 mm ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Telescopic Speed class: 25 Condition: Like new Technical condition: very good Front tire type: Pneumatic Njdpfxjzx Iygs Aazewl Front tire size: CAMSO - MPT 552 - 10.0/75-15.3 124A8 Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire size: CAMSO - MPT 552 - 10.0/75-15.3 124A8 Rear tire condition: 80 - 100% Battery voltage: 12V Battery type: Starter Battery year of manufacture: 2025 Rear work light, front work light, heater, dust filter, full cab, full free lift, CE certificate, LED, seat

Condition: used, mileage: 474,000 km, power: 235 kW (319.51 HP), first registration: 05/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 9,800 mm, loading space width: 2,500 mm, loading space height: 2,250 mm, Year of construction: 2017, Equipment: ABS, air conditioning, tail-lift, Manufacturer Volvo Model FE320 6x2?4 Thermo King T-1200R Spectrum 9,80 m. Year 2017 Condition Good Serial Number YV2V001C4HZ112473 Ref. nr. 728007 Reg. date: Last seen: 19-06-2025 Hk: 320 Km: 474000 Gearbox: Automatic Nsdpfx Asxpb Ncsazswl Eurotype: 6 Diesel tank: 1 Tank liter: 415 Rear view camera: ? Air conditioning: ? Radio: ? Disc brake: ? ABS: ? Engine brake: ? Tire Size: 315/60R22.5 Cover% left 30 - 60 - 30% Front suspension: Springs Suspension rear: Air Wheelbase: 5800 mm. Total weight: 26000 kg. Net weight: 13200 kg. Load capacity 12800 kg. Inside length: 9800mm. Internal width: 2500 mm. Interior height: 2250 mm. Lift Brand: Palfinger Remote control: ? Refrigerator brand: Thermo King T1200-R Refrigerator year: 2017 Engine hours 8947 Electrical hours: 109 Double compartment: ?

Condition: used, functionality: fully functional, Year of construction: 2026, load capacity: 2,000 kg, lifting height: 115 mm, fuel type: electric, construction height: 1,220 mm, fork length: 1,150 mm, total length: 1,552 mm, drive type: Elektro, construction width: 550 mm, Pallet truck Nodpezwzifsfx Aazowl Load center: 600 Fork width: 160 mm Fork thickness: 58 mm Mast type: None Technical condition: New Battery voltage: 48V Battery year: 2025 Battery condition: New CE certificate,

Condition: used, Year of construction: 2025, load capacity: 3,000 kg, lifting height: 5,535 mm, total length: 4,800 mm, All-terrain forklift Manitou M 30-4 Drive Diesel Year built 2025 Lifting height (mm) 5,535 Nedpfx Aoztgahoazswl Lifting weight (kg) 3,000

Condition: like new (used), Year of construction: 2016, functionality: fully functional, RGS AS556 three-phase industrial vacuum cleaner, specifically designed for use in the textile, paper, and packaging industries. Designed for continuous operation and the extraction of edge trimmings and cutting dust, threads, and fibers, as well as packaging waste. Can be used both mobile and stationary, with a 100mm viewing window in the lid. New price approx. €7,300 (2025) DATA, DIMENSIONS & WEIGHT: Voltage in volts: 400/50Hz Protection class: IP55 Power in kW: 4.0 Njdpfoziwtqex Aazewl Airflow rate m³/h: 520 Vacuum in mbar: 320 Filter area: 1.4m² Dust class: L Absolute filter Option: H14 Collection container Ø 560mm in liters: 215l Suction connection Ø in mm: 70 Weight kg: 35 Dimensions Ø x H in cm: 46 x 116 Design/Variant: painted Dents and scratches are present! Technical specifications and illustrations are not binding. Changes and errors excepted. NOTES ON SALE: An inspection can be arranged at any time in Sassenburg. The price quoted is the gross price, including statutory value-added tax. In the event of a sale to third countries or EU countries, with the exception of Germany, an invoice can also be issued without value-added tax if a valid VAT identification number is provided. NOTES ON COLLECTION: The item is available immediately. We will gladly assist with loading using a forklift.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, We offer you: CNC machining center, universal, with pallet automation Manufacturer: DMG MORI Type: DMU 50 3rd with PH Cell 150 Year of manufacture: Machine 2023 / Automation 2025 Nwedpsz A A Dxjfx Aazsl Control system: Celos with Siemens 840D sl Operate Technical data: Travel ranges: X-axis: 650 mm Y-axis: 520 mm Z-axis: 475 mm B-axis: -35 to +110° C-axis: 360° Main spindle: Speed range - main spindle: 20 - 15,000 rpm Drive power - main spindle (100/40%): 21 / 16 kW Work table: Table dimensions: D 630 x 500 mm Tool changer: Tool holder: SK 40 Number of tool positions: 120 Feed rates: Rapid traverse (x/y/z): 42 m/min Operating hours: approx. 12,320 h Spindle hours: approx. 4020 h Technical features & accessories: - Active spindle cooling - Direct path measuring system in all axes - Scraper-type chip conveyor with cleaned filter screen - Internal coolant supply (IKZ) 40 bar, consisting of: - Paper band filter - 600 l tank - Cabin roof - Rotary through-feed in the spindle - Double filter - Blow-off air through the spindle center - Rotating viewing window - Flushing gun for chip removal - Oil and emulsion mist separator - Infrared measuring probe, manufacturer Heidenhain TS 460 (if available) - Tool measurement system, manufacturer Heidenhain TT160 (if available) - Preparation for 3D quickSET - Automation interface PH Cell, consisting of: - Interface - 4-channel rotary through-feed - Automatic loading door - Operating mode 4 - Tracy surface interpolation - Pallet loading and unloading system PH 150, consisting of: - 10-position pallet storage - External electronic handwheel (if available) Accessories, tools and clamping devices shown in the pictures are only included in the scope of delivery if this is stated in the additional information. Subject to change and errors in the technical data and information, as well as prior sale!

Condition: ready for operation (used), Year of construction: 2025, operating hours: 1,351 h, controller manufacturer: FANUC, controller model: i Series iPlus, This 6-axis DN Solutions DNX 2100S Advanced was manufactured in 2025. It features a FANUC i-Series control, a 6-axis configuration including B and C axes, and a tool magazine with 60 positions. The machine offers full turn-mill capabilities, through-spindle coolant up to 70 bar, and a Renishaw probing system. Consider the opportunity to buy this DN Solutions DNX 2100S turn-mill centre. Contact us for more information about this machine. • Axes Configuration: 6 axes (X, Y, Z, B, C1, C2) • B-axis milling spindle (indexing accuracy 0.0001°) • Milling/Main Spindle: • Tool Interface: HSK-C63 • Max Speed: 12000 rpm • Power: 18.5 / 15 kW • Max Torque: 58 Nm • B-axis Travel: 240° (±120°) • Left Spindle: • Chuck Size: Ø255 mm (10") • Max Speed: 4000 rpm • Power: 22 / 15 kW • Max Torque: 456 Nm • Right (Sub) Spindle: • Chuck Size: Ø210 mm (8") • Max Speed: 5000 rpm • Power: 18.5 / 15 kW • Max Torque: 326 Nm • Tool Magazine: 60 positions • Features: Driven tools, Full turn-mill capability • Through-Spindle Coolant: 70 bar • Programmable Coolant Pressure (7 steps) • Coolant Through Opposite Spindle • Oil Skimmer • Chuck Washing • Work Area Washing: 4.5 bar • Coolant Level and Pressure Monitoring • Oil Mist Collector Preparation • Hinged Belt Chip Conveyor Njdpozv Ruuofx Aazswl • Renishaw Probing System (Measuring Head Included) • Automatic Tool Measurement • Radio Tool Measurement System RMP60 • Manual Pulse Generator (MPG) • 3-Color Signal Tower

Condition: used, mileage: 70,715 km, power: 84 kW (114.21 HP), first registration: 12/2012, fuel type: diesel, empty load weight: 2,970 kg, maximum load weight: 3,030 kg, overall weight: 6,000 kg, axle configuration: 4x4, wheelbase: 240 mm, brakes: engine braking, driver cabin: other, gearing type: other, emission class: euro4, number of seats: 2, loading space length: 2,000 mm, loading space width: 1,700 mm, loading space height: 400 mm, operating hours: 6,404 h, Equipment: all wheel drive, cabin, differential lock, trailer coupling, * German vehicle * First owner * Condition: see pictures * Previously owned by a municipal authority * Complete documentation available, including invoices, parts lists, maintenance records, etc. * Over €17,000 invested in 2025, all invoices available * 4x4 all-wheel drive * Only 6,404 operating hours * 3-way tipper * Cargo area: 2,000 x 1,700 x 400 mm * 2 trailer couplings * Trailer load capacity: 3,500 kg * Municipal plate * Work platform suitable for various attachments * Complete municipal hydraulic system available * Municipal lighting and spotlights * Snowplow, Kiefer type 220 * Salt spreader, Kugelmann type S120 * Winter service lighting * Various attachments available at an additional cost * For example: flail mower/Fiedler and Mulag front-mounted arm, complete guide post washing system with a 1000-liter tank * Hydrostatic drive * Differential lock * Heated windshield * Air-suspended comfort seat * Cab with 3 seats * Rotating beacon * Work lights * Wheelbase (mm): 2400 * Gross vehicle weight (GVW): 6,000 kg * Unladen weight: 2,950 kg * Payload: 2,910 kg * If sold to businesses and for export (non-EU and EU), the German commercial regulations apply. If a new TÜV inspection is desired, we will be happy to provide you with a quote from our partner workshops. Nwsdpfx Aaoz Ak S Tozol Our offer generally does NOT include a new TÜV inspection, a new DGUV, a new SP, or a new UVV. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish Note: We strongly recommend and offer an inspection and evaluation of the goods so that the buyer does not have any false impressions about the condition and suitability. Inspections and evaluations are possible at any time by appointment and are expressly desired. All information is provided without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.

Condition: excellent (used), machine/vehicle number: 9003-0399, first registration: 12/2024, color: grey, emission class: euro6, Year of construction: 2024, operating hours: 149 h, Mast: Telescopic (13 sections) Superstructure brand: FASSI F .2.27 XHE+JIBL 615+ LIER CE marking: yes Technical condition: very good Optical condition: very good OFFER FASSI F990RA.2.27 XHE-DYNAMIC WITH L615 JIB AND BREVINI BWF3000 HYDRAULIC WINCH Crane year of manufacture: 31.12.2024 JIB year of manufacture: 2025 Operating hours: Only 149 hours --- General description We are pleased to offer you this virtually new Fassi F990RA.2.27 XHE-Dynamic loading crane. The crane is fully equipped with the powerful hydraulic L615 fly jib and a Brevini BWF3000 hydraulic winch. With only 149 operating hours, this crane system is in excellent technical and optical condition. The combination of the powerful main crane, the L615 JIB and the professional winch makes this system the ideal solution for the most demanding lifting operations in the construction industry, machinery and plant engineering, wind power, steel construction and in special transport. Equipment * Fassi F990RA.2.27 XHE-Dynamic * Hydraulic fly jib type L615 * Brevini BWF3000 hydraulic winch * Crane year of manufacture 2024 * JIB year of manufacture 2025 * Only 149 operating hours * Radio remote control * Hydraulically extendable outriggers * Hydraulically pivoting outrigger legs * Endless swivel system 360° * XP high-performance system * ProLink double lever system * Dynamic version * IMC (Integral Machine Control) * FX900 safety control * FX901 touchscreen display * D900 digital hydraulic valve block * ADC Automatic Dynamic Control * Flow Sharing hydraulic system * Overload protection * Automatic stability monitoring * Complete hydraulic system * Complete winch equipment * Ready for immediate use Technical data | Feature | Value | | ----- | -----: | | Lifting moment | 80.84 tm (793 kNm) | | Maximum hydraulic reach | 18.05 m | | Maximum reach with L615 JIB | 28.15 m | | Maximum working height | approx. 31 m | | Swivel range | 360° endless | | Operating pressure | 33.5 MPa | | Required oil volume | 80–100 l/min | | Hydraulic oil tank | 250 liters | The Dynamic version comes standard with the XP system, ProLink double lever, IMC control, Flow Sharing and the most modern electronic safety and control systems. Installation dimensions | Dimension | Dimension | | ----- | -----: | | Installation length | 2,540 mm | | Installation width | 2,055 mm | | Transport height | 2,840 mm | Weight F990RA.2.27 XHE-Dynamic with L615 JIB Weight: approx. 9,790 kg Max working height 32 meters Brevini BWF3000 hydraulic winch Nwsdpfx Aajzxgl Uezol The installed Brevini BWF3000 is a professional, high-performance hydraulic winch for the most demanding lifting operations. Advantages: * High tensile force * High rope speed * Robust industrial design * Ideal for precision lifting operations * Perfect in combination with...

Condition: used, mileage: 202,000 km, power: 355 kW (482.67 HP), first registration: 03/2024, fuel type: diesel, overall weight: 20,500 kg, axle configuration: 2 axles, next inspection (TÜV): 02/2026, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, Equipment: air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, DAF XF480 FT Super Space Cab – One of the last new MY2017 XFs! ----Nutzfahrzeuge Göppl GmbH – Authorized DAF Dealer----USED VEHICLE – AVAILABLE IMMEDIATELY Manufactured: 12/2023 First registration: 08.03.2024 Roadworthiness certificate (HU): 02/2026 Safety inspection (SP): 08/2025 Warranty: Plus Vehicle: 3 years – 500,000 km full warranty Next service: March 2026 – 250,000 km Equipment: - Super Space Cab - Air-suspended cab - Exterior sun visor, “green light-permeable” - Fog lights with cornering/turning illumination - Skylights - Aero package - Fixed roof spoiler - Side skirts - Side deflectors - “Super Air” driver’s seat with heating and ventilation - Passenger seat: Basic - Curtain with partition curtain - LED cabin lights - Upper bunk - Lower bunk with 65-liter drawer - XtraComfort mattress - Refrigerator - Automatic climate control - Auxiliary heater - DAF Night Lock - Manual master switch - Turn assist system - Axle load monitoring - Adaptive cruise control with FCW and AEBS - MX-13 engine, 355 kW/483 HP, EURO 6 - ECO-Performance - 12-speed TraXon gearbox - ZF-Intarder - Rear axle ratio: 2.38 - Wheelbase: 3.80 m - Tires: Pirelli - Front: 385/55R22.5 - Rear: 315/70R22.5 - Suspension: Nwjdoxdgd Uspfx Aazsl - Front: 8.0t parabolic - Rear: 13.0t air suspension - SAF S36-20 fifth wheel, 150+40mm - Alternator: 150A, batteries 2x 210Ah AGM - Battery energy monitoring - Heated fuel pre-filter - Aluminum fuel tanks: 845 + 340 liters - AdBlue tank: 90 liters - Splash guard - Preparation for gearbox PTO Optional: - OBU installation - Tachograph calibration - Gearbox PTO - Hydraulic system: tipper/walking floor/tanker ----Nutzfahrzeuge Göppl GmbH Weiden – Regensburg – Leupoldsgrün – Bamberg – Nuremberg Authorized DAF Dealer – DAF Service Partner – FIAT Professional Service Partner Subject to errors and prior sale Sale to commercial customers only.

Condition: used, mileage: 296,516 km, power: 120 kW (163.15 HP), first registration: 03/2016, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 6,450 mm, total width: 2,080 mm, total height: 2,900 mm, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: 1 DIN slot in the front below the headliner, airbag on the passenger side, hill start assist, exhaust pipe in front of the rear axle on the left, exterior mirrors without integrated turn signal, outside temperature display, battery 100 Ah, additional battery (reinforced), 1-pole battery disconnect switch, turn signals in the front on the side, roof control unit with reading light for driver/passenger side, entry lights, additional main key, folding cover for storage compartment, configurable special module, spare wheel with Super-Single tire (235/65 R16), spare wheel holder under the end of the frame including jack, interior rearview mirror, rear wall with window, mud flaps in the front, seats in the cab: passenger seat comfort, seats in the cab: driver seat comfort, reinforced rear stabilizer, reinforced front stabilizer, fuel gauge for auxiliary heater, separation relay with additional battery, rear wall paneling, thermal insulation for the driver's cab, heat protection glazing (windshield with band filter at the top), auxiliary heater (air) electric Additional equipment: Adaptive brake light, airbag on the driver's side, display for washer fluid level, exterior mirrors electrically adjustable and heated, both sides, brake assist, braking system with ABS+ASR, roof lining in the cab, lockable glove compartment, body/superstructure: standard flatbed, fuel tank: main tank 75 liters, headlight range adjustment, truck approval, engine 2.1 L - 120 kW CDI CAT, wheelbase 3665 mm, smoker's package, low emissions according to emission standard Euro 5, safety belt system with warning system (driver's side), seat cover/upholstery: fabric Lima, maintenance interval display Assyst, permissible total weight 5.00 t, twin tires on 2nd axle/rear axle * 1st owner * Air-suspended rear axle * Ambulance and rescue vehicle with box body * Superstructure by Fahrtec Systeme * Adjustable floating table * Stretcher frame * Central locking for the patient compartment * KONVEKTA air conditioning system * 1 attendant seat * Refrigerator compartment * Warming cabinet * Sink * Medical cabinets * Oxygen and suction system prepared * 12 + 230 Volt sockets * Skylight * Exterior storage compartments * Rear wing doors with step * Side door with sliding window and step * All-around work lights * Partition with sliding window Nwodpfxjzn Elrj Aazol * Ambient lighting on the right, left and rear * 2x interior lighting, bright white and blue * Cab with 2 seats * 2x air conditioning in the front and rear * Automatic transmission * Telma retarder * Electric windows * Electrically adjustable and heated mirrors * Searchlight * Daytime running lights * Driver and passenger airbags * ABS and ASR * Twin-tired rear axle * Extra pneumatically extendable step at the rear * Superstructure dimensions: L=3,650 x W=1,900 x H=1,980 mm * Wheelbase: 3,650 mm * Permissible total weight: 5,000 kg * Unladen weight: 4,415 kg Proper all-season tires from Conti with DOT 2025 and approximately 8.0 mm of tread depth all around. Engine, automatic transmission and rear axle are dry. The engine runs smoothly and the automatic transmission shifts cleanly. The starter battery is new. +++ Subject to errors, changes and prior sale.

Condition: used, Year of construction: 1991, functionality: fully functional, conveyor belt width: 500 mm, pressing force: 400 t, DGUV certified until: 07/2027, year of last overhaul: 2017, sheet thickness steel (max.): 7 mm, Edelhoff DARRW 2/400 – 400-ton pressing system with ALBA strip feeding system For sale is a complete mechanical pressing system, manufactured by Gebr. Edelhoff, type DARRW 2/400, manufactured in 06/1991, with an ALBA strip feeding system, coil unwinder, straightening unit, roller feeder, modernized Siemens SIMATIC control system, UNIDOR process monitoring, and MFP Z-conveyor, manufactured in 2025. The system is installed and can be inspected and demonstrated after prior appointment. Technical data of the press: Manufacturer: Gebr. Edelhoff Werkzeugmaschinenfabrik Type: DARRW 2/400 Year of manufacture: 06/1991 Machine No.: 9131 Design: mechanical twin-column stamping press Pressing force: 400 Mp / approx. 4,000 kN Nodpfx Ajzv Ukgeazowl Table size: 1,100 × 1,500 mm Stroke adjustment: 40–120 mm Ram adjustment: 120 mm Stroke rate: 20–80 strokes/min Motor power: 45 kW Electrical system: 380 V Control system / process monitoring The machine control system has been modernized. Equipment includes: Siemens SIMATIC control system UNIDOR process/pressing force monitoring with visualization Screen-based operation Separate main control panel Additional machine-side control panel Integration of the strip feeding system into the system control Extensive switching and control technology ALBA strip feeding system Complete strip feeding system with several ALBA components, consisting of: Coil unwinder Coil holder with spreading mandrel Hold-down / guide arms ALBA straightening unit ALBA roller feeder Separate control unit for the strip feeding system Technical data of the strip processing: Strip width: max. 500 mm Material thickness: max. 7 mm Material cross-section: max. 1,800 mm² Strip speed: up to 25 m/min 2 transport rollers 8 straightening rollers Year of manufacture of ALBA components: 1991 The strip feeding system consists of several ALBA units with separate nameplates. Part removal MFP Z-conveyor Year of manufacture: 2025 Automatic part discharge from the pressing area Modernization / overhaul The pressing system underwent extensive overhaul in the years 2017–2019. The documented costs for the overhaul amounted to approximately €92,000. In addition, the system was equipped with an MFP Z-conveyor, manufactured in 2025. Inspection The press was last inspected on 07.07.2026 according to DGUV Information 209-030. Condition / Inspection The complete system is currently installed at the production site. Inspection and demonstration under production conditions are possible after prior appointment. Dismantling, relocation, and reinstallation Upon request, in addition to the machine sale, we offer the complete technical handling of the relocation: Professional dismantling of the system Preparation for loading and transport Relocation to the new production site Reinstallation and assembly at the destination Further services according to individual agreement The scope of services can be individually agreed upon and offered according to the buyer's requirements. Financing If the buyer has sufficient creditworthiness, a financing solution can be offered or arranged for the acquisition of the system. Details, term, and conditions will be determined after individual assessment and agreement. Further technical documents and information are available upon request. Technical data provided to the best of our knowledge and according to the available machine documentation or nameplates. Subject to errors and prior sale.

Condition: excellent (used), Year of construction: 2025, total length: 4,600 mm, total width: 2,000 mm, overall weight: 600 kg, This heavy-duty industrial stainless steel platform is designed to meet high hygiene and load requirements. It is ideally suited for use in the food industry, pharmaceutical production, chemical processing, or agriculture. Thanks to the integrated filling openings, it is particularly suitable for feeding machines, mixers, or filling stations positioned underneath the platform. Technical Data & Dimensions Manufacturer: GRT Projects Year of manufacture: 2025 Condition: Like new Total area: approx. 9.2 m² Length: 4,600 mm Width: 2,000 mm Platform height: 1,750 mm Net weight: approx. 600 kg Nwsdpozz H Nfofx Aazjl Material: High-quality stainless steel, corrosion-resistant and easy to clean and disinfect Equipment Safe standing and walking surface: Heavy-duty stainless steel chequer plate for high slip resistance. Raised edge protection / toe boards around the platform help prevent tools or small parts from falling. Complete fall protection: Stable stainless steel tubular guardrail around the platform with handrail and intermediate rail. Comfortable access: Includes matching stainless steel stairs with perforated, slip-resistant safety steps and guardrails on both sides. Process openings: Integrated filling openings in the platform floor for direct material feeding. Condition: The platform is in excellent, virtually new condition. Everything from a single source: We will be happy to offer you suitable bank financing for your project. komplett-konzept.leasingo.de

Condition: refurbished (used), functionality: fully functional, Year of construction: 2013, total length: 2,868 mm, total height: 2,102 mm, total width: 1,960 mm, overall weight: 2,200 kg, Hello, we are selling several 3D printers from an insolvency estate. All are professional-grade devices from the automotive development and design sector. This listing features the Stratasys Objet 1000 / J4100 from 2013. The printer underwent a mechanical overhaul by Stratasys in 2025 and was updated to the latest standards electronically and in terms of software. This upgrade cost approximately EUR 135,000. Accessories such as a replacement print bed with a mobile lifting frame and various spare parts are included. Consumables can be purchased additionally at a favorable price. This is a stereolithography printer, meaning liquid resin is cured using UV/laser technology, creating the component layer by layer with extremely high detail, precision, and excellent surface quality. Thus, it is an absolute professional-grade device that can, for example, print multi-colored automotive lights with a clear glass appearance. A new device in this print volume size currently costs well over EUR 350,000 (net). Technical data: Build volume/build size max: 1,000 × 800 × 500 mm Layer thickness up to 27 microns High speed: up to 3 base resins, 27 µm resolution Super high speed: 1 base resin, 55 µm resolution PolyJet UV technology 110–240 V Dimensions: 2,870 x 1,960 x 2,105 mm Weight: 2,200 kg Nwodpfoz Ahq Tex Aazsl The price is ex works; we can arrange loading. We also offer worldwide shipping and the necessary customs documents, for an additional fee. The device can be inspected at our warehouse. Price includes VAT; invoice with VAT shown separately. !! Sale only to business customers, without warranty, no guarantee, no exchange, sold as is. Further description from the manufacturer: Create large or small production tools and full-size prototypes. Maximize your productivity and achieve a quick ROI with the Stratasys J4100™ 3D printer. Its multi-material capability, high throughput, and extra-large build platform enable faster, smarter, and more precise workflows. Thanks to PolyJet Technology™, this powerful system enables engineers, manufacturers, and designers to 3D print any design – no matter how complex or detailed. The size of the parts is irrelevant: the J4100 prints both large and small prototypes with equal precision. Print large parts with a length of over a meter in a single print job. This eliminates the need to split large CAD files and later assemble the parts. Print many parts in a single print job and benefit from competitive unit costs. The reliable and user-friendly J4100 enables you to produce parts that are ready for use with minimal or no post-processing. The support material can be quickly removed with a water jet, and for most applications, the smooth, multi-material parts do not require polishing or painting.

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 1 h, load capacity: 3,500 kg, lifting height: 5,500 mm, free lift: 1,673 mm, fuel type: electric, mast type: triplex, construction height: 2,752 mm, fork carriage width: 1,100 mm, fork length: 1,150 mm, empty load weight: 4,890 kg, total length: 2,748 mm, drive type: Elektro, construction width: 1,230 mm, Electric 4-wheel forklift Load center: 500 mm Fork width: 125 mm Fork thickness: 50 mm ISO class: ISO Class 3 = 2,500 – 4,999 kg Mast type: Triplex Condition: New machine Technical condition: New Front tire type: Superelastic Front tire size: 23x9-15 Rear tire type: Superelastic Rear tire size: 6.50-10 Battery voltage: 80V Battery capacity: 277Ah Battery type: Lithium-ion Battery year: 2025 Description: New machine with a 12-month manufacturer's warranty according to the manufacturer's warranty terms. Njdpfjyb Uqrjx Aazjwl Features: Sideshift, fork positioner, 3rd valve, 4th valve, rear work light, front work light, roof cover, windscreen, load protection guard, full free lift, CE certificate, safety light, non-marking tires, lithium-ion technology, interior mirror, rotating beacon, LED lighting.

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 8 h, load capacity: 5,000 kg, lifting height: 4,040 mm, fuel type: electric, mast type: simplex, construction height: 2,855 mm, fork carriage width: 1,350 mm, fork length: 1,350 mm, empty load weight: 6,850 kg, total length: 2,500 mm, drive type: Elektro, construction width: 2,275 mm, Four-way side loader Load center: 600 Fork width: 150 mm Fork thickness: 50 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Standard Condition: New machine Technical condition: New Front tire type: Non-marking Front tire size: 405x220x305 Front tire condition: 80 - 100% Rear tire type: Non-marking Rear tire size: 27x10-12 Rear tire condition: 80 - 100% Nwsdpfx Aoyxtwmsazel Battery voltage: 80V Battery capacity: 620Ah Battery manufacturer: Exide Battery type: PzS Battery year of manufacture: 2025 Description: New machine from 2026! Fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, full cab, CE certificate, safety light, 3-wheel.

Year of construction: 2025, condition: used, Year: 2025 Condition: Excellent Technical specifications: - Print width: 66 mm - Maximum book height: 350 mm - Printheads: EPSON i3200 Nwedpfx Aajzzynbszol - Print resolution: up to 1200 dpi - Printing speed: 0–40 m/min - Ink type: Water-based ink - Supported print data formats: JPG, PDF, PSD, BMP, TIFF, GIF, TGA, EPS - Supported operating systems: Windows 7, Windows 10, Windows 11 - Power consumption: 480 W - Power supply: 1-phase, 240 V, 50 Hz - Dimensions (L × W × H): 190 × 120 × 165 cm - Weight: 400 kg - ROBOJET is a printing machine designed for single-side printing on the edges of finished books. The machine features very simple and user-friendly setup. The printhead position and book transport path are adjusted automatically according to the book format. Books are transported through the machine by means of guide and transport belts. Loading and unloading of the books is performed manually. The machine is equipped with 2 EPSON i3200 printheads, offering a maximum print resolution of 1200 dpi and a print width of 66 mm. The machine achieves a production capacity of approximately 200–300 books per hour when printing on three book edges.

Condition: good (used), Year of construction: 2011, functionality: fully functional, Technical details x-travel 1600 mm y-travel 1250 mm z-travel 1600 mm B-axis (table) 360.000 x 0,001° deg milling-head swivable +/- (HV) 360.000° deg pallet size: 1000 x 800 mm table load 3000 kg tool taper SK 50-B Plananlage 125 spindle turning speed range max. 8000 U/min transmission ratio 2 spindle drive (100/40 % ED) 37/50 kW feeds x/y/z -stepless 30000 mm/min max. torque on the spindle 1410/2000 (100/40 % ED) Nm total power requirement 100 kVA dimensions of the machine ca. 11555 x 7998 x 5050 mm Additional information Universal machining center 5 axes simultaneously Original purchase price: EUR 1.295.000,- First machine installation in September 2011. A geometry measurement report (dated 30. August 2025) is available. Equipment: CNC-control Siemens 840D Solution Line Separate handheld control unit, wired, Siemens HT-2 Nsdpfx Aaozvm Hyozswl 2-station pallet changer with safety light barrier 110-position tool changer (max. tool length 600 mm) with 2nd Siemens 840 D control panel Tool taper cleaning system Special cabin with oil mist extraction system Coolant tank 3.300 liters, pump pressure 4 bar/50 bar (Q1/Q2) Chip conveyor Workpiece measuring probe Manual books Spare part: New ball screw. Note: The machine will be sold without tool holders, tools, and clamping devices.

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 1,776 h, load capacity: 200 kg, mast type: telescopic, lifting height: 15,000 mm, lifting power: 230 kg/m, platform length: 700 mm, platform width: 1,400 mm, overall weight: 1,550 kg, empty load weight: 1,550 kg, transport length: 4,100 mm, transport width: 800 mm, transport height: 1,940 mm, construction height: 1,940 mm, fuel type: hybrid, fuel tank capacity: 7 l, color: red, We are offering this used Cela DT15 Spyder tracked platform, manufactured in 2016, for sale. Maximum reach: 7.50 m Minimum working height: 15 m Load capacity: 230 kg Rotation angle: 360° Hybrid: Honda GX440 gasoline engine + electric Self-leveling Additional options: 220 V + compressed air/water line in the work platform Width: 80 cm (without work platform) Height: 194 cm Weight: 1550 kg + 4 outrigger plates Nsdpfxezv Ik Ho Aazjwl Never rented out, first owner Major service performed in December 2025 + new starter battery An IFOR WILLIAMS 3.5 T low-loader trailer is also available for sale (EUR 2800 + VAT). If you have any questions or would like more information, please send us a message or call us.

Condition: used, Year of construction: 2017, Scania V8, new TÜV valid until 01/2026, SP until 07/2025, fully equipped, year of manufacture 2017, 6x2 steered, stationary air conditioning, 910,000 km, up to 70 tonnes possible, Paragraph 70 present. Very well-maintained vehicle, operated by a reputable company in long-distance motorway transport. Well-tired, regularly serviced, no maintenance backlog, always maintained under a service contract. Nwsdpfxewd Icus Aazsl

Condition: excellent (used), mileage: 334,000 km, power: 316 kW (429.64 HP), first registration: 03/2016, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, loading space length: 6,000 mm, loading space width: 2,500 mm, loading space height: 1,000 mm, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, crane, cruise control, electric window regulation, fog lights, power mirror, = Further options and accessories = - Aluminum fuel tank - Power brake booster - High beam headlights - Air suspension - Radio/CD player - Reversing camera - Sun visor - Toolbox - Xenon lighting - Central lubrication = Notes = 8x4 Tridem Euro 6 Last axle: lift/steer axle Kerkhove tipper 6.00 x 2.50 x 1.00 m Crane: Effer 175.2/3S 3x hydraulically extendable Remote control 5th and 6th hydraulic circuit with rotator Belgian registration Inspection valid until 25-03-2025 In very good condition! Immediately operational = Further information = Axle configuration Front axle 1: Steered Rear axle 1: Lift axle; Steered Weights Unladen weight: 16,240 kg Payload: 15,760 kg Gross vehicle weight: 32,000 kg Functional Crane: Effer 175.2/3S, year 2016, mounted behind the cab Tipper: Rear tipping Condition Technical condition: very good Optical condition: very good Nodpfoza Ifmjx Aazowl Further information Please contact G. Damen or W. Schischke for more information.