Used Fitness Cube for sale (2,577)

Condition: used, maximum load weight: 12,000 kg, overall weight: 16,000 kg, first registration: 01/2009, loading space length: 8,690 mm, loading space width: 2,460 mm, loading space height: 2,400 mm, loading space volume: 51 m³, total width: 2,590 mm, total height: 2,750 mm, Year of construction: 2009, Vehicle No. G0106558_1 - Manufacturer: Krone. * Floor: Aluminum floor * Simple corner fittings * Electrical cable for refrigeration unit Lodpfxoz A Rths Ah Sjhn * Rear door design: Rear portal doors * Refrigeration unit * Portal door with simple espagnolette locks (external) * Support legs fixed * Locking bars on rear doors: 2 * Tie-down rails New leak test. Rear portal/portal door with simple espagnolette locks/external made of stainless steel. Storage container wind and weatherproof, lockable, floor in good condition, no further repairs. Delivery time: IMMEDIATELY. Technically ready for use without further repairs. Test run down to -18°C OK! Substructure with signs of wear. UVV applicable. Mobile refrigerated storage unit. Dimensions are approximate. Offer subject to change without notice and prior sale. Prices net ex location, D-59302 Oelde. Further details are available by phone or email:

Condition: good (used), Spark trap, spark pre-separator for ventilation ducts, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Spark trap: with copper lamellae Ljdpfx Aez A Thnoh Sshn -Connection: Ø 400 mm -Dimensions: 680/510/H540 mm -Weight: 48 kg

Condition: excellent (used), Year of construction: 2001, Eckold tool ECKOLD - HLA60 MACH-ID 9687 Make: ECKOLD Type: HLA60 Year: 2001 Lodpfez A Trgex Ah Sehn Beak-Shaped shrinking dies for U-profiles They are specifically made to eliminate marring the material while shrinkin These jaws fit the Eckold KF170PD Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1995, Hole row and fitting drilling machine Year of manufacture: 1995 Single-row hole row and fitting drilling machine Hinge plates and fittings can be processed without major retooling Workpiece width max. 600 mm Drilling bar with 15 spindles, spacing 32 mm Indexing system, manual, with stop guides Drilling length max. 480 mm Motor 2.2 kW - 2800 rpm Drill chuck 10 mm with clamping surface Operating pressure 6 bar Ledpfx Ajz H Dwneh Sehn Weight: approx. 220 kg Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2011, 2011 Sealpac A6 tray sealer with triple mould – used, in good working condition This Sealpac A6 is a tray sealer built in 2011 by Sealpac GmbH in Oldenburg, a German manufacturer known for its packaging machinery for the food industry. The machine is fitted with a triple mould of approximately 185 x 280 mm and a walking beam infeed, which moves trays step by step and stably towards the sealing stations. According to the manufacturer, the A6 reaches a capacity of up to 90 packs per minute, depending on tray type and application. The construction is in stainless steel and the machine is in good working condition. Located in Emmeloord, the Netherlands. Available immediately – price on request. More photos and full details on our website: [](/) Machine type: Tray sealer Mould: 3 tray tooling, approx. 185 x 280 mm Lhsdpfx Ajz Hqy Ash Sen Infeed: Walking beam Capacity: Up to 90 packs/min (depending on tray and application) Material: Stainless steel Condition: Used, good working condition Origin: Sealpac GmbH, Oldenburg (Germany)

Condition: ready for operation (used), Year of construction: 2020, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, number of axes: 3, This 3-axis Leitz Reference HP 5.4.3 was manufactured in 2020. It features a measuring range of 500 × 400 × 300 mm and includes a granite table, Hexagon LSP-X3 probe system, and a Leitz controller. If you are looking to get high-quality coordinate measuring capabilities, consider the Leitz Reference HP 5.4.3 CMM machine we have for sale. Contact us for further details. • Viewing: Possible by appointment; machine can be seen running • Incoterm/Collection: EXW Technical specifications • Accuracy (MPE-E): 0.70 + L/400 µm • Probing error (MPE-P): 0.80 µm Lhedpfxoz H Tmro Ah Ssn • Table: Granite table • Probe system: Hexagon LSP-X3 • Stylus clamping: HP-S-X3 • Stylus changer: Hexagon 5-port stylus change rack • Change ports: HR-X3-P • Controller: Leitz controller in free-standing cabinet • Operator control: Leitz twin-joystick panel with emergency stop Machine history / service • Aug 2020: Machine and accessories supplied new by Hexagon Metrology • Sep 2020: Software bundle supplied by Hexagon • Feb 2021: 6 additional M2 stepped styli purchased • Apr 2021: Installed and commissioned in Andover by a Hexagon engineer (Installation/service report ref. 15320) • Last calibration: 16 May 2023 by Hexagon Metrology • Standard: ISO 10360-2:2001 • Certificate: CAA/REF769/543/16052023 • Result: Calibration met customer specification • Certificate available on request • Calibration validity: until 24 May 2024 Additional equipment • QUINDOS version 2023 • I++ Simulator + QUINDOS bundle • Additional CMM model • Licence manager for add-on bundle • Software licence transfer: subject to confirmation by Hexagon Peripherals and fixturing • HP workstation PC with 2 monitors • Kinematic fixturing: • Swift-Fix universal kinematic base (1) • Swift-Fix kinematic plates 300 × 300 × 16 mm (2) • Ceramic reference sphere Ø30 mm (1) Styli, holders, adapters, and change hardware • HR-X3-P changer ports (5) • Stylus kit • Special stylus holders (3) • 8 × M5 + 8 × Ø2 mm stylus holder (1) • M5/M2 stylus adapter (1) • M2 5-way stylus holder (1) • M2 stepped styli: 4 + 6 • M2 stylus R1 (1) • Special Ø0.3 mm ruby styli (8) • Special Ø1 mm ruby/carbide stylus (1) • Ø1.5 mm Si3N4 stylus (1) • Ø3 × 35 mm ruby stylus (1) • Ø3 × 50 mm ruby stylus (1) • Ø5 × 60 mm ruby stylus (1) • Titanium extension (1) • Rotary joint (1) • Adjustable cubes (2) • M5 cube (1)

Condition: new, Year of construction: 2025, Martin T 45 thickness planer with Tersa cutterblock Accessories: 7,5 KW The T45 thickness planer offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. blocking for easy cutter change - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, finely planed table surface - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s Ljdpfxeqlclbs Ah Sjhn - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, The Uniq series is a full-fledged base model in our product range and shares all the characteristics that have made the Kündig edge sanding machine renowned in the market as a robust, versatile precision tool. Part of its extremely robust construction is the motor-driven oscillating sanding unit, which offers a maximum oscillation stroke of 90 mm and the possibility of motor-driven inclination of up to 45°. All common edge processing operations can be performed at the up to four sanding stations. Kündig Uniq edge sanding machine, front and rear Ingenious design – the sanding unit The heart of all our edge sanding machines is the sanding unit. It offers a range of intelligent functions and features. For example, in our machines, the sanding belt does not oscillate by tilting the belt rollers. Instead, the entire sanding unit moves up and down. The oscillation stroke, as well as the oscillation range, are easily set by pressing a button. Thanks to the flexible adjustment and the large oscillation stroke, sanding belts can be used optimally over their entire width, without laborious adjustment of the worktable height. The oscillation mechanism is driven by a separate motor. The tilting of the sanding unit is also conveniently done using a rotary switch and with the help of its own motor. The unit can be tilted between 90° and 45°. Thanks to the well-thought-out pivoting mechanism, the full oscillation is always available and simultaneous sanding on both sides is possible. The different table heights of the front and rear sanding stations also ensure that the belt is not used at the same height at the same time. Furthermore, the combination of the pivoting mechanism and the different table heights ensures that the distance between the sanding unit and the worktable remains minimal at every angle of inclination. Changing the belt is also quick and easy, taking only seconds. The four sanding stations Lsdpfjfig Rwsx Ah Sehn 1. Sanding station: "Veneer side" The front sanding station is used for the precise calibration of materials and functions like a planing machine. The feed stop is adjusted using a rotary handle to set the material removal to within a tenth of a millimeter. Importantly, the stop is not tilted. The feed stop, sanding pad, and discharge stop are always parallel to each other. Rounding of workpieces is thus excluded. Fine adjustment of the sanding pad for grain compensation or setting to zero between stops and pad is possible via a handwheel. The massive worktable is fitted with sliding pads on this side. 2. Sanding station "Solid wood side" This station is ideal for sanding flat, angled, chamfered, or externally rounded workpieces. Again, the entire sanding unit oscillates. The belt runs across its entire width on a graphite surface that keeps it cool. On the solid wood side, there is also a mitre stop. Supplied accessories: Half-round table Additional table with sanding rollers Location: In stock, 54634 Bitburg - immediately available -

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: DM2AE437, number of ink cartridges: 6, color channels: CMYK + Weiß + Lack, number of print heads: 3, resolution (max.): 1,200 dpi, paper width (max.): 300 mm, paper height (max.): 420 mm, total length: 1,290 mm, total width: 1,355 mm, total height: 856 mm, counter reading (color): 41, type of input current: AC, input current: 5 A, input voltage: 230 V, Equipment: raster image processor, Title: Mimaki UJF-3042 MkII e (Year 2022) – Only 41 m² printed! Includes Kebab Option & Professional Free Package (SURA, UV DTF A+B Films, and Base Frame) Object Description: For sale is a top-of-the-line professional UV printing system: a Mimaki UJF-3042 MkII e (year 2022) including the high-quality Kebab option. The machine is being sold due to business closure and is a rare find on the used market: according to the meter reading, the machine has only printed a total of 41 m². You will receive a system in new condition at a fair used price. The machine has been meticulously maintained and was continuously connected to the power supply to ensure proper execution of the automatic maintenance and circulation cycles (preventing nozzle failures). Why proper pretreatment is so important in UV printing: A crucial factor in professional UV printing is the permanent adhesion of the color to challenging materials such as glass, metal, ceramics, or smooth plastics. Without special pretreatment, the ink can easily flake or scratch off. This is where the Pyrosil system (flaming unit) included in this offer comes into play: it creates an ultra-thin, invisible adhesive layer through silicidation and alters the surface tension. The result is an extreme, dishwasher-safe, and scratch-resistant bond between the material and the ink – absolutely essential for the professional and durable finishing of promotional items! Technical Highlights & Features: Model: Mimaki UJF-3042 MkII e (current generation) Year: 2022 Condition: Like new (only 41 m² total print volume) Configuration: CMYK + White + Varnish (LH 100) Lhjdpfxsyr Aiwe Ah Sen Kebab MkII Option: Included (original Mimaki device for 360° all-around printing on bottles, glasses, etc. – new price approx. €2,700) Software: RasterLink 7 RIP software included 🎁 EXCLUSIVE FREE PACKAGE (additional equipment worth approx. €4,000!) Since we are completely closing down the business, we are giving away the following professional equipment for pre- and post-treatment free of charge with the printer. A separate sale of these components is not possible – a real all-in-one package for your production start: 1. SURA Instruments Pyrosil GVE 2 HB Professional flaming unit for silicidation (surface pretreatment). Ensures extreme adhesion on glass, metal, and ceramics + plastics. Includes hand torch and gas hose. Important note regarding the condition: The hardware of the Suralink Pyrosil flaming device is in excellent condition. However, the included consumables have exceeded their expiration date and should be reordered by the buyer for professional production. Current new price: approx. €2,900.00 net 2. Material Starter Set Includes UV-DTF film set (A+B). 3. Robust machine base frame Custom-fit and stable table/stand for the Mimaki. Ensures a safe, wobble-free stand during printing and the optimal, ergonomic working height. Pricing & Processing: The sale is made as a complete package with a proper invoice and VAT shown separately. Location & Collection: The machines are located in 33178 Borchen. An up-to-date nozzle test can be carried out during inspection. If you are interested or would like to arrange a viewing, please contact us directly via the messaging function.

Condition: used, bottom outlet NW 50 pressure gauge with outlet Optional: various fittings Lhjdpez N S Twjfx Ah Sjn

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: - Electrics 3x400V 50 / 60Hz - Gimbal-mounted 5-axis electrospindle 12 kW (S6) HSK F63 - 24,000 rpm - ceramic bearings incl. liquid cooling with infinitely height-adjustable extraction hood - electric-motor controlled - full rated power at approx. 12,000 rpm - speed: 1000 - 24000 rpm - drive: 3-phase HF motor, inverter-controlled - direction of rotation: clockwise/counter-clockwise - 2 controlled compressed-air connections - interface for aggregates - tool weight (rotating): 6 kg - max. saw blade Ø 350 - spindle cooling: liquid cooling - extraction hood infinitely variable - Profit H350 16.30: CNC machining centre in gantry design (without tool) with digital drives (driven on both sides). The machine column of the Profit H350 16.30 is made of thick-walled, electrically welded rectangular tubes. The steel ribbing inside the column achieves high stability. - Machining field H350 16.30: Travel of the axes: X = 4000 mm Y = 1970 mm Z = 455 mm Working field: X = 3000 mm Y = 1500 mm Z = 150 mm clearance height Axis positioning speeds: depend on the selected safety system (these can be found in the layout). Ledpfx Aezlbpbjh Sehn - Travelling gantry driven on both sides - Guide system X axis: The travelling gantry of the X axis is driven via a rack with inclined, crowned tooth form - This guarantees highest precision. The reduction gear ensures highest machining quality and repeat accuracy. The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. - Guide system Y axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Y axis is positioned by means of a ground recirculating ball screw. - Guide system Z axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Z axis is positioned by means of a ground recirculating ball screw. - Automatic central lubrication: The grease is delivered in a controlled manner to the guide carriages of the X, Y and Z axes as well as to the recirculating ball screws in Y and Z. The lubrication process is carried out automatically after a specified time. - 12-position linear tool changer on the left of the machine column incl. a pick-up position for aggregates: The 12-position linear changer ensures shortest changeover times and offers sufficient space for milling tools. One aggregate change position (fitting variants see layout) Max. tool diameter 250 mm Max. tool length 240 mm - Drilling head DH 18 6H 1S: Vertical 12 spindles: 7 spindles in the X direction and 5 spindles in the Y direction. Horizontal 6 spindles: 4 spindles in the X direction and 2 spindles in the Y direction. Forward stroke = 70 mm max. drill length = 70 mm and shank D = 10 mm. All spindles are individually driven and selectable. 1 grooving saw – in the X direction max. saw blade diameter 120 mm max. blade thickness 5 mm max. speed infinitely variable up to 7500 rpm. The drilling group covers the entire working field both horizontally and vertically. - Controlled central extraction connection: Via the program control, either the drilling head or the milling spindle is extracted. This controlled slide gate achieves an optimised extraction performance. Connection diameter see layout - 6 workpiece supports: With front and rear...

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 2,200 kg, loading space width: 3,000 mm, loading space length: 10,000 mm, loading space height: 2,600 mm, Villex Ultra Giant Cube Blanc 1.0 – Gigantic Premium Space Container, 10.0 x 3.0 m (30 m²) Are you looking for a particularly large, representative, and flexible space solution? The Villex Ultra Giant Cube Blanc 1.0 from Villex Container GmbH offers you 30 m² of usable space in one unit! Thanks to its extra width of 3.0 m and its XXL length of 10.0 m, this large-space container is ideal as a spacious office, break room, sales area, training room, or storage space. 🔹 TOP FEATURES * Huge amount of space: 30 m² of open space for individual layouts and maximum usage possibilities. * Timeless design: Elegantly contrasting exterior panels in gray-white (RAL 9002) with an anthracite-colored base frame (RAL 7016). * Flexible access: Equipped with 2 insulated steel doors for optimal accessibility. * Usable all year round: 5 cm thick ISO-PUR sandwich panels (polyurethane) guarantee excellent insulation and a comfortable indoor climate in every season. * Bright interior: Two double-glazed standard windows (1000 x 1000 mm) provide sufficient daylight. 🔹 TECHNICAL DATA & EQUIPMENT * Model: Villex Ultra Giant Cube Blanc 1.0 * Manufacturer: Villex Container GmbH * External dimensions: 10.00 m x 3.00 m x 2.60 m (L x W x H) * Area: approx. 30.0 m² * Weight: approx. 2,200 kg (robust, durable steel construction) Lhjdpfsz S Ngasx Ah Son * Panel color: RAL 9002 (gray-white) * Frame color: RAL 7016 (anthracite) * Insulation: 50 mm ISO-PUR sandwich panels * Doors: 2x insulated steel doors * Windows: 2x standard windows with double glazing (1000 mm x 1000 mm) 🔹 ELECTRICAL EQUIPMENT (READY FOR IMMEDIATE USE) * Power connection: 1x 32A CEE external plug (red) * Sockets: 3x double sockets * Lighting: 2x LED lighting units * Switch & safety: 1x light switch + fuse box with RCD 🛠 INDIVIDUAL CUSTOMIZATIONS Do you need additional features for your large-space container? We will adapt everything to your wishes: * Air conditioning: If desired, an air conditioning system (cooling & heating) can be installed. * Sanitary & kitchen: Installation of a toilet, shower, sink, or kitchenette. * Security: Roller shutters, safety glass, or additional locks. * Room layout: Installation of partition walls or additional interior doors. 🚚 DELIVERY & SERVICE * Delivery: Fast nationwide delivery directly to your desired location. * Assembly: Easy assembly – ready for immediate use. 📞 INTERESTED OR HAVE QUESTIONS? Write us a direct message or call us! We will gladly provide you with a non-binding consultation for your project and create a customized offer. (Office container 10x3, large-space container, modular construction 30m², residential container 10m, training room, break room, sales container, Villex Ultra Giant Cube, container gray-white RAL 9002, double container alternative, XXL container)

Condition: used, mileage: 572,878 km, power: 331 kW (450.03 HP), first registration: 06/2021, fuel type: diesel, overall weight: 19,000 kg, axle configuration: 2 axles, next inspection (TÜV): 10/2028, brakes: retarder, color: red, gearing type: automatic, emission class: euro6, Year of construction: 2021, Equipment: air conditioning, Internal vehicle no.: G400286 Available immediately at our site in Kaufungen. More information: * Luis Lucena * Viktoria Sologubova GERMAN Scania R450 4x2 hazardous materials tractor unit – ADR EX/II, EX/III, FL and AT – retarder Lhedpfx Aoz Shw Eoh Sen German Scania R450 tractor unit from 2021, extensively equipped for the transport of hazardous goods. The vehicle has ADR approval classes EX/II, EX/III, FL and AT, as well as an automatic transmission, retarder and automatic climate control. Technical data: * Vehicle number: G400289___1 * Vehicle condition: Used vehicle * Category: Hazardous materials tractor unit * Manufacturer: Scania * Model: R450 * First registration: 06/2021 * Year of manufacture: 2021 * Engine displacement: 12,742 cm³ * Cylinders: 6 * Power: 331 kW (450 hp) * Fuel type: Diesel * Drive type: Internal combustion engine * Transmission: Automatic * Emission class: Euro 6 * Environmental badge: 4 (Green) * Axle configuration: 4x2 * Axles: 2 * Permissible gross vehicle weight: 19,000 kg * Unladen weight: 7,852 kg * Payload: 11,148 kg * Colour: Red * Automatic climate control * MOT: new * German vehicle ADR equipment: * Hazardous goods vehicle in accordance with ADR * Approval class EX/II * Approval class EX/III * Approval class FL * Approval class AT * Prepared for the transport of the corresponding hazardous goods * ADR equipment according to the vehicle configuration Additional equipment: * Retarder/Intarder * Automatic transmission * Automatic climate control * Cab with sleeper berth * Fifth-wheel coupling * AdBlue system * Digital driver information system Inspection and test drives are possible after prior appointment. Further information, photos and documents are available on request. Errors, changes and prior sale reserved. ENGLISH Scania R450 4x2 hazardous-goods tractor unit – ADR EX/II, EX/III, FL and AT – retarder German Scania R450 tractor unit manufactured in 2021 and equipped for the transport of hazardous goods. The vehicle has ADR approvals EX/II, EX/III, FL and AT and is fitted with an automatic transmission, retarder and automatic climate control. Technical specifications: * Reference number: G400289___1 * Condition: Used vehicle * Category: Hazardous-goods tractor unit * Manufacturer: Scania * Model: R450 * First registration: 06/2021 * Year of manufacture: 2021 * Engine displacement: 12,742 cm³ * Cylinders: 6 * Power: 331 kW (450 hp) * Fuel: Diesel * Drive type: Internal-combustion engine * Transmission: Automatic * Emission standard: Euro 6 * Environmental badge: 4 (green) * Axle configuration: 4x2 * Axles: 2 * Permissible gross weight: 19,000 kg * Unladen weight: 7,852 kg * Payload: 11,148 kg * Colour: Red * Automatic climate control * New technical inspection * German vehicle ADR equipment: * Hazardous-goods vehicle in accordance with ADR * EX/II approval * EX/III approval * FL approval * AT approval * Prepared for the transport of the relevant classes of dangerous goods * ADR equipment according to the vehicle configuration Additional equipment: * Retarder/Intarder * Automatic transmission * Automatic climate control * Cab with sleeping area * Fifth-wheel coupling * AdBlue system * Digital driver-information system Inspection and test drive are possible by prior appointment. Further information, photographs and documents are available upon request. Errors, changes and prior sale reserved. Financing example: Internal number: G400286 * Purchase price: €50,900.00 * Down payment: 10% * Term:

Condition: excellent (used), Year of construction: 1999, CHAIN FILTER Maximum filter capacity : 30.000 m3/h ATEX Approved 4 x Dust extraction Fans, 15 Kw each. ( All 4 frequenz controlled ) Filter measures : L 6700 x W 2400 x H 4200 mm ( Without legs : H 3300 mm, will fit on a low truck in 1 section ) Cross air unit included Filter + fans has always been located inside, so the condition is very good. Lsdpfxsz R Eh Ds Ah Sehn

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, power: 25 kW (33.99 HP), cooling capacity: 25 kW (33.99 HP), type of cooling: air, Set of 2 chilled water production type air conditioning units (chillers) with their 2 air handling units (AHUs), pipes, and fittings. Capacity: 25 kW Reversible (heating/cooling) 2 sets available (2 chillers + 4 AHUs) Available for immediate delivery. Ljdpoz Rvh Isfx Ah Sehn

Condition: used, mileage: 400 km, power: 130 kW (176.75 HP), first registration: 10/2025, fuel type: diesel, color: white, gearing type: automatic, number of seats: 3, total length: 5,986 mm, total width: 2,040 mm, total height: 2,355 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, * Approved as a 3.88t vehicle * Approved total weight * Standard climate zones * Electronic Stability Program (ESP) * Tow hitch, detachable and lockable * One towing eye at the front * Disc brakes at the front * Increase of approved total weight from 3.5t to 3.88t * All-wheel drive * Leather multifunction steering wheel, heated with Tiptronic * Partition, without window * Three-point automatic seat belts at the front with electric belt tensioner * Normal roof * Double bench seat in the cab on the right with storage compartment * Driver's seat on the left * Extended interior noise reduction * Seat heating for front seats, separately adjustable * Windshield in heat-protective glass, heated * Central locking "Keyless-Go" without safe lock * Safety interior mirror, dimmable * Dashboard with special fittings * Exhaust concept, WLTP3 N1-III, N2//EU6EC * Airbags for driver and front passenger, without knee airbag, with front passenger airbag deactivation * Rubber floor covering in the cab * Wooden floor in the cargo area * Lateral interior paneling in the cargo area (up to the roof frame) made of plywood * Incomplete truck approval * Sliding door on the right in the cargo/passenger compartment * Exterior mirrors left and right, convex plus wide-angle * Hinges for rear doors with enlarged opening angle * Sun visors with mirror * 2nd heat exchanger plus 2nd evaporator * Lashing eyes for securing cargo * Lane assist plus emergency assist and traffic jam assist * Radiator protection grille * Rear mud flaps * Interior grab handle (entry at the partition) * Exterior mirrors, electrically foldable, electrically adjustable, separately heated * Immobilizer, electronic * Entry handles on the rear pillar, left + right * Speed limiter up to 90 km/h * Tire pressure monitoring, frequency 433 MHz High * Start/stop system with recuperation * Navigation system (Baseline) * Auxiliary heating with air and water heating, programmable * Park assist * Optional infotainment (MIB3 MP) version 2 * Second battery * High beam assistant * LED headlights * Front Assist with warning and braking for vehicles, pedestrians and cyclists * Windshield wiper intermittent control with light/rain sensor * Key for locking system with remote control * 4 speakers (passive) * Automatic distance control * Fog lights and turning lights * Headlight cleaning system * LED interior lighting concept in the passenger/cargo area * Daytime running light with assistant driving light and coming/leaving home function, automatic * Comfort telephony with LTE and wireless charging * Preparation for Smart TCO * Seat belt control, E-contact in the seat belt buckle Ljdpezx Nabefx Ah Sjhn * Wired & Wireless App-Connect * 230V inverter and socket for Europe * Country cluster "WLTP EU approval" * BSIS driving direction right, with MOIS * 4-cylinder turbo diesel engine 2.0 L / 130 kW (4V) TDI * Online service, with OCU, with head unit coding, without WFS connection * Distraction and fatigue detection * With socket at the front * 8-speed automatic transmission for all-wheel drive * Preparation for alcohol interlock * Acoustic warning system for engaged reverse gear, can be switched off * Battery 520A (92Ah) * With rear view camera system (version 2) * Air conditioning with electronic control * With crosswind assist * With predictive speed limiter (pLIM) * Seat covers in imitation leather * With UNECE CS&SU * Pan-European eCall * Air conditioning with manual control with additional cooling for the cargo area * Light alloy wheels "Li

Condition: used, Have we aroused your interest? Then please register on our homepage - we look forward to hearing from you! Lsdpoztw Hxefx Ah Sohn Your Maschinen Besmann Team We have an Amada Promecam GTH 420 for sale, which was manufactured in France. Due to its size, it also fits into a smaller workshop. Amada Promecam 420 GTH guillotine shears Manufacturer: Amada Type: Promecam 420 GTH Condition: used Cutting length: 2000 mm material thickness: 4mm in steel Backgauge: electric, 750 mm Motor power: 5,5 KW Weight: approx. 3300 kg

Condition: used, Year of construction: 1995, Technical details: cutting diameter: 300 mm saw band length: 3200 mm saw band width: 25 mm dimensions of saw-band: 3660 x 25 x 0,9 mm electrical connection: 400/50 V / Hz. total power requirement: 1,1 kW work height max.: 650 mm machine weight approx.: 960 kg Lhsdpfx Ahozp Iu Sj Sen cutting speed: 15 - 95 m/min dimension machine approx.LxWxH: 2,2 x 2,0 x 1,3 m The Klaeger & Müller HBA 300 G CNC is a robust, hydraulically operated CNC horizontal band saw designed for precise and economical cutting of solid materials, tubes, and profiles made of steel, stainless steel, aluminum, and non-ferrous metals. Thanks to its CNC control system, it enables the automatic processing of production batches with high repeatability and productivity. The machine is equipped with a hydraulic material feed, automatic saw feed, and infinitely variable blade speed adjustment, allowing optimal machining of a wide variety of materials. Its rigid machine construction ensures smooth, low-vibration operation, excellent cutting quality, and extended saw blade life. In addition, the band saw is fitted with a coolant system that improves blade life and ensures clean, accurate cutting surfaces. The Klaeger & Müller HBA 300 G CNC is particularly suitable for industrial applications in metal fabrication shops, steel construction, toolmaking, mechanical engineering, and serial production. *

Condition: used, Technical details: grinding table: inclination: nein Grad voltage: 220 V machine weight approx.: 44 kg space requirements of the machine approx.: 0,3 x 0,45 x 1,1 m Lhsdpfx Ahsu Ng Sqe Ssn Disc right: Ø 150mm x W: 50mm; disc fitted with emery burrs Disk left: Ø 125mm x W: 50mm; disk equipped with emery burrs support on both sides Machine mounted on stand with base plate. Operation via on/off switch *

Condition: refurbished (used), Year of construction: 1999, Fully refurbished Hosokawa Alpine Pharmapaktor APC L200/30 used standalone system by Alpine Originals. Technical details: Construction materials: Non product contacted parts: stainless steel Product contacted parts: stainless steel Non pressure shock resistant (NPSR) Non ATEX (can be implemented for an additional price) Without vacuum deaeration (can be implemented for an additional price) Scope of supply: Hosokawa Alpine Pharmapaktor APC L 200/30, including feeding, without Flake Crusher. The Hosokawa Alpine APC L200/30 Pharmapaktor is the perfect compactor to test the product behaviour with this technology, while it even allows to keep a continuous production at small scale if needed. The Pharmapaktor can be fitted with a flake crusher to granulate the resulting compacted material increasing the possibilities of end product sizes and forms, from different sort of briquettes to granulates according to the required specification. Thanks to its flexibility, the machine can be adapted to different products and tasks. It even complies with the tough pharmaceutical standards. Compacting head Two cast stainless steel H-frames connected by spacer bolts. Two laterally foldable swing arms for easy and quick changing of the rollers. The swing arms are fixed with two tie rods, which also absorb the compressive forces of the compacting rollers. One chamber insert for guiding the product flow and two center pieces for sealing the rollers. Lhsdpfx Ahsvq Nlxe Sjn Pre-compaction unit The pre-compaction unit is mounted on a supporting column and can be lifted and swivelled to the side. The charging hopper (with 2 brake bars) is equipped with a cylindrical/conical precompression screw. When the pre-compaction unit is lifted off, a limit switch switches off the compacting rollers and the screw. A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery

Condition: excellent (used), Year of construction: 2021, 30-watt CO2 laser Working area: 457 x 30 mm Lsdpfoz Surujx Ah Sohn Engraving and cutting of wood, paper, rubber, acrylic, etc. Exhaust system: Atmos Cube PC: HP ProDesk 400G7 Small Form Factor PC Includes monitor, keyboard, and mouse. Software: RayJetManager pre-installed.

Condition: new, General information Year of manufacture: 2026 Field of application: Construction Reference number: 10 Weights Empty weight: 1.000 kg Functional CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Fits to following machines: 17-24ton excavator Delivery terms: DAP, EXW Lhodpsq Ixtxefx Ah Sjn Working pressure: 210 bar Required hydraulic flow: 90 l/min Production country: KR Additional information Please contact Ö. Inalkac for more information We can offer you all range of selector/ demolition/ sorting grab/ grabs/ grapples. All grapples with one year warranty. Contact us for details. Also available as non-rotating version. We have grapples from 75kg to 2000kg in stock in our Netherlands warehouse. We can ship worldwide! selectorgrab, selector grab, grapple, grapples, grappin, Schrottscheren, greifen, megragad, grajfer, PINZAS DE SELECCIÓN Y DEMOLICIÓN, PINCE DE TRI, KOCKÁZATKÖVEK, TORTAS DE CLASSIFICAÇÃO, PUNCTE DE SORTURI, Pinze Demolitrici, Selezionatrici, Pinces de Demolition, chwytaka, chwytak

Condition: used, operating hours: 1,980 h, lifting height: 13,870 mm, fuel type: electric, General information Year of manufacture: 2007 Year of construction: 2007 Technical information Drive: Wheel GVW: 7.402 kg Dimensions (LxBxH): 556 x 179 x 200 cm Functional Ledey S Uhtspfx Ah Sohn Mast: articulated arm Lifting capacity: 227 kg Working height: 1.587 cm Condition General condition: average Technical condition: good Visual appearance: average Additional information Please contact Ton for more information Manufacturer: Genie Type: Z45/25J DC Year of manufacturing: 2007 Weight: 7.402 KG Hourmeter: 1980 Drive: Electric Product number: EX001 Platform height: 13,87 m Working height: 15,87 m Platform measurements: Maximum outreach: 7,62 m Total measurements LxWxH: 556x179x200 cm Max. platform load: 227 Machine is technically in good condition. Fitted with good batteries. Documents incl. CE. Price: € 9.950,- excl. VAT, available from our warehouse in Hedel, The Netherlands. Delivery/transport is possible, ask for price. Keywords: Hoogwerker Schaarlift Schaarhoogwerker Telescoophoogwerker Knikarmhoogwerker Genie JLG Haulotte Skyjack Upright Manitou Hinowa Niftylift Aichi Snorkel Omme Scissorlift Boomlift Articulated Platform Arbeitsbühnen Scherenbühne

Condition: good (used), operating hours: 1,040 h, fuel type: electric, General information Year of manufacture: 2010 Year of construction: 2010 Technical information Drive: Wheel GVW: 6.851 kg Dimensions (LxBxH): 671 x 175 x 201 cm Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 1.419 cm Condition Technical condition: good Visual appearance: good Additional information Please contact Ton for more information Manufacturer: JLG Ledpsy S Uffsfx Ah Sohn Type: E400AJPN Year of manufacturing: 2010 Weight: 6.851 KG Hourmeter: 1040 Drive: Electric, 4x2 Product number: 23007 Platform height: 12,19 cm Working height: 14,19 cm Platform measurements: 76x152 cm Maximum outreach: 7,48 m Total measurements LxWxH: 671x175x201 cm Max. platform load: 230 KG Machine is technically in good condition. Fitted with good batteries. Documents incl. CE. Price: € 14.950,- excl. VAT, available from our warehouse in Hedel, The Netherlands. Delivery/transport is possible, ask for price. Keywords: Hoogwerker Schaarlift Schaarhoogwerker Telescoophoogwerker Knikarmhoogwerker Genie JLG Haulotte Skyjack Upright Manitou Hinowa Niftylift Aichi Snorkel Omme Scissorlift Boomlift Articulated Platform Arbeitsbühnen Scherenbühne

Condition: good (used), operating hours: 899 h, mast type: telescopic, lifting height: 10,650 mm, fuel type: electric, Year of manufacture: 2015 Year of construction: 2015 GVW: 4.900 kg Dimensions (LxBxH): 365 x 120 x 199 cm Lifting capacity: 200 kg Working height: 1.265 cm Technical condition: good Visual appearance: good Please contact Ton for more information Manufacturer: JLG Type: Toucan 12E Plus Year of manufacturing: 2015 Weight: 4.900 KG Hourmeter: 899 Drive: Electric, 4x2 Product number: 25041 Platform height: 10,65 m Working height: 12,65 m Platform measurements: 70x105 cm Maximum outreach: 6,7 m Total measurements LxWxH: 365x120x199 cm Max. platform load: 200 KG Lhjdpfx Ahjy S Uu Hj Sjn Machine is technically in good condition. Fitted with good batteries. Documents incl. CE. Price: € 17.950,- excl. VAT, available from our warehouse in Hedel, The Netherlands. Delivery/transport is possible, ask for price. Keywords: Hoogwerker Schaarlift Schaarhoogwerker Telescoophoogwerker Knikarmhoogwerker Genie JLG Haulotte Skyjack Upright Manitou Hinowa Niftylift Aichi Snorkel Omme Scissorlift Boomlift Articulated Platform Arbeitsbühnen Scherenbühne