Used Flap Element Passage Flap for sale (4,864)

Condition: used, mileage: 32 km, power: 96 kW (130.52 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, first registration: 01/2025, emission class: euro6, color: white, number of seats: 6, total length: 5,981 mm, total width: 2,474 mm, total height: 2,100 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, Consumption data for basic vehicle before conversion. Dsdpfovv Aukox Al Njch Internal number: 86430---- Subject to errors and prior sale! SPECIAL EQUIPMENT * Outside mirrors electrically adjustable, heated and foldable * Seats: No rear seats * Seat package 14: Driver's seat adjustable in 4 ways - Single passenger seat adjustable in 4 ways - Headrests height adjustable - Seat heating for driver and passenger - Inside armrest for driver and passenger seat - Lumbar support, manual (driver's seat) - Seat cover: fabric * Auxiliary heating package 1: Auxiliary heating (fuel-powered additional heating), programmable, including remote control - including cold start package (-29 degrees) * Technology package 10: Heated windscreen - Windscreen wipers with rain sensor - Parking pilot system front and rear - Emergency brake assistant, active (camera-based) - Lane assistant with fatigue warning and high beam assistant, additionally with lane keeping assistant - Headlight assistant with day/night sensor - Cruise control - Rear view camera - LED downlight - Fog lights - Ford audio system with 4 inch multifunction display * Heat-insulating glazing, medium tint * KMP conversion: Linearlift AMF Solid (warning lights, side guard rails, roll-off protection) - MobileFlex system floor - B-pillar bus bar - Automatic diagonal shoulder belt with height adjustment - Automatic three-point belt with adjustable belt whip and sliding element for height adjustment - Wheelchair and passenger restraint system with retractor belts - Grey storage box - LED additional flashing lights at the rear/flat - Börde aluminum step - Linea EcoLeg single seat (integrated headrest, automatic three-point belt, right armrest, central base with quick release) OTHER EQUIPMENT * 1 battery * Airbag on driver and passenger side * ABS with electronic brake force distribution * Battery life, battery life programmed to 10 min * Rubberized floor (in driver's cab and passenger compartment) * On-board computer with consumption and mileage information (e.g. B. remaining range) as well as outside temperature display and Ford ECO mode * Complete roof liner * Double-wing rear door with 180° opening angle (with window) - with heated rear windows, rear window wiper including windscreen washer nozzle * ESP with traction control - hill start assist - crosswind assist - safety brake assist - rollover protection - emergency brake support including emergency brake light * Passenger compartment lighting with delay circuit * Window, 2nd row: side windows fixed, right * Electric front window lifter with quick-down/up circuit for driver's side * Ford Easy Fuel - comfort tank cap and misfuelling protection * Generator, high-performance version * Lockable glove compartment with lid * Interior lighting with delay circuit with reading lights at the front * Air conditioning at the front including dust and pollen filter * Fuel tank 70 l * Steering wheel: artificial leather steering wheel * Steering column, adjustable in height and reach * MyKey key system - individual programmable second key * Emergency call assistant * Particle filter: diesel particle filter * Wheels: wheel covers * Wheels: tire repair kit * Wheels: steel wheels 6.5 J x 16 with 235/65 R 16 tires * Headlight dipped beam halogen headlights with daytime running lights * Sliding door, right * Mud flaps rear * Side protection strips * Low side paneling * Power steering * Seat belts - seat belt tensioners and belt force limiters at the front - warning system for driver's

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, total length: 5,500 mm, total height: 2,000 mm, total width: 1,400 mm, type of input current: three-phase, product height (max.): 400 mm, product width (max.): 650 mm, compressed air connection: 6 bar, film width: 650 mm, Manufacturer: Kallfass Verpackungsmaschinen GmbH Model: Super Wrap 650 De Luxe In-Line Bundling Machine Year of manufacture: 2009 Dimensions: approx. 3160 x 1340 x 2000 mm (LxWxH) Weight: approx. net 570 kg / gross 620 kg Technical specifications: Film: Flat film, up to approx. 120 µm Film roll width: max. upper 650 mm, lower 620 mm Working height: 815 - 915 mm Passage width: 650 mm Passage height: 100 - 400 mm Power supply: 400 V three-phase Rated current: 7.2 A Compressed air connection: 6 bar Compressed air consumption: approx. 20 L/cycle This particularly versatile bundling machine operates with two flat film rolls. Product infeed is fully automatic via an in-line conveyor belt. The sealing system is permanently heated, thermostat-controlled, and therefore maintenance-free. Film rolls are simply placed, and film feeding is motor-driven. Dcodpfsxxlhnox Al Njh Manufacturer: Kallfass GmbH Model: Shrink Tunnel Standard 650 NT Year of manufacture: 2009 Dimensions: approx. 2400 x 1400 x 1550 mm (LxWxH) Weight: approx. net 750 kg / gross 820 kg Technical specifications: Tunnel passage width: 650 mm Tunnel passage height: 400 mm Tunnel outfeed, extended: approx. 500 mm Working height: 800 - 900 mm Power supply: 400 V three-phase Rated power: 26.5 kW Rated current at 400V: 38.5 A in stand-alone operation Powerful, universally applicable shrink tunnel with laterally adjustable air flaps and externally adjustable outlet openings underneath for precise control of hot air flow, ensuring optimal shrink results even with challenging product contours. The recirculating air system, tunnel hood with additional double-chamber system, and significantly improved all-round insulation ensure energy-efficient operation. Equipped with infinitely adjustable rod chain conveyor. Inspection and demonstrations are possible at our premises by appointment. Function guarantee, no warranty.

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 7/61, Manufacturing origin Swiss Voltage 380/50/3 Netweight abt. 760 kg Dimensions abt. 1250x1000x1700 mm TECHNICAL DATA WORK CAPACITY Travel X and Y 200x200 mm Vertical slide travel 250 mm Djdpjd Amgkofx Al Nech Travel of drilling spindle 70 mm Max free passage between table and spindle nose 330 mm Free passage between column and centre of spindle 260 mm Max drilling capacity (steel) 10 mm Max reaming capacity 50 mm TABLE Usable surface 400x300 mm Admitted load 100 kg Travels X and Y through motors Number of T-slots 6 (longitudinal) DRILLING HEAD Spindel morse taper 0 Speed of spindle 150-3000 rpm Feed of drilling spindle 0,015 mm/t PRECISION Direct reading on divided drums 0,01 mm Direct reading on verniers 0,001 mm Guaranteed precision on displacement of slide-way 0,002 mm MEASURE Measuring system direct, optical Elements of measure graduated rule, div.1mm Read-out projection screens Shifting of zero-point yes Direct read-out 0,001 mm Guaranteed positioning precision 0,002 mm Installed power 1,2 kW errors and omissions excepted data given without obligation Inventory Nr.2160006, machine equipped with : 1 turning table Ø 220 with optical measure 1 centering microscope with 3-points suspension, zoom 40x, lightening 1 centering device with dial comparator cap. 3 mm. MT0 1 centering point MT0 1 tracing tool with spring-mounted point MT0 1 center punch MT0 1 chuck for centering drills MT0 1 self clamping drill-chuck 0-5 mm., MT0 1 boring head type 0, cap. 0.5-30 mm., MT0 1 levelling foot with 2 round levelling supports

Condition: new, Year of construction: 2025, travel distance X-axis: 390 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 300 mm, spindle speed (min.): 2,000 rpm, spindle speed (max.): 24,000 rpm, overall weight: 450 kg, tool diameter: 14 mm, warranty duration: 24 months, power: 2 kW (2.72 HP), If you are looking for a real machine and not a toy, then you have come to the right place: immediately ready for use, engraving, milling, drilling, for effective plastic and light metal processing. CNC DIN ISO G code milling machine including handy CNC control Working area: with T-slot table X=390mm Y=230mm Z=300mm Basic frame of the milling machine made of cast elements approx. 280kg with base cabinet for necessary machine assemblies such as cooling and power supplies / inverter and control approx. 170kg All axes with ball screws and 25 mm linear guides including dust protection and manual central lubrication for all axes including encoder-monitored axis drive! High-frequency spindle up to 24,000 rpm 2kW water-cooled Collet ER20 up to max. 14 mm milling tools - optional G code controlled minimum quantity lubrication Dodji Hb I Tspfx Al Njch - optional G code controlled suction - optional G code controlled vacuum table solution (* Prices depending on equipment, control and spindle, this is a brand new milling machine from our production) The milling machines are 100% manufactured according to customer requirements in our factory in Plauen! Illustrations show different equipment variants; You will receive a brand new milling machine from our production) Technical characteristics: · Drive system: high-precision ball screw · Working speed: max. 6000 mm/min x-y-z working area / travel range: 390 mm x 230 mm x 300 mm · Passage height: 300 mm x-y-z increment: 0.01mm/increment x-y-z repeatability: 0.02 mm · File formats: G-code, ISO data · HF milling spindle: 2.2 kW water-cooled, others optional · Spindle speed: 6,000 - 24,000 rpm Tool chuck ER20: Power connection: AC 240V, 50Hz · Power consumption: max. 2,600 W · Dimensions (WxDxH): 1300 x 850 x 1800 mm · Weight approx. 475 kg with base cabinet

Condition: used, Year of construction: 2007, pressure 200 t throat 510 mm stroke 16 - 160 mm ram - range of adjustment 120 mm table surface area 1500 x 1000 mm table height over floor 900 mm hole in the table 800 x 250 mm ram surface 1000 x 700 mm tool hole in ram 65 x 110 mm T-slot - width 28 mm number of strokes adjustable 30 - 120 min oil volume Hydraulikaggregat 5 l daylight, max. stroke above - ram adjustment above 600 mm daylight (stroke down, ram adjustment above) 440 mm total power requirement 32,2 kW weight of the machine ca. 24 t dimensions of the machine ca. BxTxH 2,85 x 3,1 x 3,65 m - hydraulic clutch - fixed table - hydraulic overload protection in the ram - hydraulic connecting rod clamping - Motorized ram height adjustment 120 mm with digital display set ram height, rapid and slow speed - fully automatic stroke adjustment, adjustment range 16 - 160 mm - Ram weight compensation - electronic OT correction - Planetary gears - Oil circulation central lubrication - Separate control panel with SIMATIC S7/300 screen control - Press force measuring device - Reversing switch (return) - additional operating mode “set-up-creep speed” - electric stroke counter - electrical preset counter - electrical travel limitation of the connecting rod journal - electronic cam switch - continuously variable drive (frequency controlled) - 2 sockets - Clamping plate - Temperature monitoring main bearing / support bearing / connecting rod bearing - Operating hours counter - Oil cooler - Set of oscillating elements Additional equipment: Electronic roller feed ebu EVX 500 Passage width: 10 - 500 mm Material cross section: max. 1,600 mm² Material thickness: 0.2 - 5.0 mm Number of reels: 2 Roller diameter: 100 mm Intermediate ventilation: up to over 300 l/min Feed length: 1.0 - 9,999.9 mm Dedpfevbk Rwjx Al Noch Feed speed: max. 150 m/min

Condition: excellent (used), Year of construction: 2019, Roller Conveyor - Curved - 90° Manufacturer: Interroll Model: RM8320_R24/48V_CURVE General Technical Specifications Max. Load Capacity: 50 kg/zone Conveyor Speed: 0.1 to 1.0 m/s (up to 50 kg) 1.01 to 1.39 m/s (at 35 kg, 48 V, 50 W, BI, max. 10 starts/stops per minute and a minimum product length of 450 mm) Max. Electrical Power per Zone: 50 W Roller Type: Interroll Series 1700KXO Roller Diameter: 50 mm Roller Material: 1.5 mm Steel, with Gray Tapered Polypropylene Sleeves Max. Number of Rollers per Zone: 6 for 30°, 9 for 45°, 12 for 60°, 18 for 90° Dedpfx Alowbh D Ho Nsch Price: per piece. We offer more than 100 meters of roller conveyors from Interroll – in various lengths, with or without drive, curves, adjustable legs, access flaps, inclined infeeds, transfer elements, etc.

Condition: new, Year of construction: 2024, functionality: fully functional, grinding width: 1,350 mm, grinding height: 200 mm, height adjustment type: electric, grinding belt length: 2,620 mm, grinding belt width: 1,400 mm, Heesemann multi-purpose surface grinding machine, type HSM .4 NEW Edition RQHD ROLLER/TRANSVERSE/LONGITUDINAL DLB/DB-S Sanding width 1,350 mm Stand construction with transport bed With continuous transport carpet, feed speed 3 - 15 m/min. frequency-controlled, workpiece thickness (3 - 200 mm) motor-adjustable Automatic workpiece thickness measurement in the machine infeed Workpiece suction clamping system with adjustable vacuum for transporting workpieces shorter than 500 mm in the feed direction, integrated fan with frequency converter, drive power 2.2 kW Non-driven rollers (2 each in the machine infeed and outfeed) Industrial PC 15.6" (permanently installed) Multitouch color display, CF card, Windows Embedded Standard operating system, touch screen version, display for production and downtimes. Ethernet connection possible. Program memory for 100 programs Program for remote maintenance Program for extraction flap control For the extraction flaps/sliders to be installed by the customer, the external pneumatic valves can be controlled with any external operating voltage, e.g. (115V AC / 230V AC / 24V DC) via the pre-installed, potential-free relay contacts. MMI package consisting of: - Intuitive machine operation with self-explanatory symbols - Outfeed and infeed LED strips as operator assistance for the workpiece (infeed workpiece positioning for better sanding belt utilization, outfeed indicates workpiece position) - Belt manager status display on the unit (screen) - Aggregate information with grain size (screen) - Visualization of the position of the workpiece as it passes through through the machine. - Video camera in the outfeed of the machine 1 contact roller unit with steel roller Sanding belt dimensions: 2,620 x 1,400 mm Belt speeds: 24 m/s Drive power: 22 kW Diameter: 200 mm 1 cross sanding unit Sanding belt dimensions: 4,800 x 150 mm Belt speed: 2.0 - 20 m/s Drive power: 15 kW Frequency converter 1 longitudinal sanding unit with pressure flap belt system Sanding belt dimensions: 2,620 x 1,400 mm Belt speeds: 1.8 - 9 m/s (with pressure flap belt) 1.8 - 18 m/s (without pressure lamella belt) Drive power: 15 kW frequency converter Infinitely variable adjustment of the sanding belt speeds, wear-free braking device, automatic compensation of any differences in belt edge lengths, sanding belt working in counter-rotation, oscillating sanding belt cleaning, adjustable. Dsdpfju Ic Rgsx Al Noch 2 pressure bars with computer-controlled selective pressure control system CSD® (10 year warranty) In addition, the electromagnetic CSD® system is maintenance-free, as there is no risk of contamination as with pneumatic elements. 1 Rotating disk brush unit DB-S 10 driven disk brushes, working in 2 directions of rotation, central height adjustment for abrasive wear, incl. quick-change device for disk brushes Brush fill: Flex-Trim Diameter: 150 mm Operating voltage: 400 Volt, 50 Hz Uninterruptible power supply for belt tracking monitoring in the event of a temporary interruption in the power supply Energy Management System EMS Belt support side: left Terminal: front left Workpiece stripping device LED lighting inside the machine (on the belt support side) Further information on request.

Condition: ready for operation (used), Year of construction: 2020, operating hours: 50 h, functionality: fully functional, Continuous dryer / laboratory machine Continuous dryer with infrared heating element (LEISTER) Suitable, for example, for furniture, moulding, or window construction The system was purchased for measuring drying times. Djdpoxhxmvsfx Al Nech Transport (crawler transport) consisting of chain drive with supporting trays Feed via frequency inverter, 1–10 m/min. Passage width: max. 300 mm

Condition: excellent (used), Year of construction: 2019, Maximum swing range (vertical axis of the electric spindle): 1650 – 2350 – 3000 mm Vector speed (X-Y) (PRO-SPEED): 85 m/min Programmable speed in Z-axis: 30 m/min Element passage: 170 mm Multifunction device BRC-K: Technical specifications (Gr-Multif_BRC-K_2.1_N5.1-0.6) 1) Performance: Motor 3.6 kW (S6 - 40%) Number of poles: 2 Speed control: via CNC with frequency inverter Cooling system with fan 3) Horizontal milling spindle: Tool holder: ER25 Dsdpsyffh Njfx Al Nsch Spindle speed: 6000–18000 rpm Rotation direction: clockwise/counterclockwise Max. tool dimensions: L1 = 151 mm / W1 = 120 mm / D = 20 mm Max. tool dimensions 2: L2 = 111 mm / W2 = 80 mm / D = 20 mm Max. machining depth: 115–75 mm

Condition: good (used), Year of construction: 2007, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 141-8300, cutting length (max.): 7,000 mm, saw blade width: 100 mm, year of last overhaul: 2022, Zenz BN 110 S saw with mechanization 22 kW drive motor 7 m cutting length 5 vertical supports 2 tensioners (+ 2 supports) Log lifter 4 leveling devices with claws 1 log roller 1 pre-cutter 20 l water lubrication drum PLC control Seat mounted on armrests PLC on the left - joystick on the right Mechanization, built in 2022, consisting of: Hydraulic flap frame for removal from the saw with electrically driven roller conveyor Dcjdpfx Aswhcwhel Njh Roller conveyor with hydraulic ejectors 4 m roller conveyor All electrical and hydraulic elements can be operated from the operator's station. Zenz automatic sharpening machine, type AHB No. S-1012

Condition: new, Year of construction: 2025, Manual segment bending machine 2 meter working width The SGR model is equipped with segmented bending tools on the three beam elements: upper, lower and bending beam. Sheet metal can be bent on all sides and, for example, complex box shapes or workpieces with bending legs up and down can be produced. Multi-use, powerful, heavy and very solid segment folding bench - this is not a typical folding bench - much stronger and more robust. A segment folding machine is characterized by full segmentation over the entire working length of 2 meters. Upper and lower segments can be removed easily and quickly and the bending beam is divided into segments. The bending angle is from 0 to 160 degrees. Lock with the pedal, your hands are free and you can easily position the sheet metal - open and close with your foot. The bending beam is connected to 2 gas pressure dampers, so controlling the bending beam is incredibly easy. At the rear of the machine 2 practical tool boxes for segments or tools. Dcedpfxscntp Ds Al Nsh Technical specifications: - maximum working width; 2050mm - Bending angle max. 160 degrees - max. sheet thickness (steel) 1.2mm - Weight 600kg - segment jaw width 30,40,50,60,70 and 100mm - three cheeks are equipped with segment jaws (full segmentation) -Stop for preset bending angles -degree scale passage 100mm wheels incl. Delivery date: every week Delivery costs are PLEASE ASK We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 23% of VAT (polish invoice).

Condition: new, Year of construction: 2026, Main advantages: - The CORMAK GOLIAT 660 x 4000 universal lathe can be used for many tasks, such as turning internal and external surfaces, cones, polishing, metric, inch modular and DP threading, drilling and broaching. - The solid cast iron bed construction ensures maximum vibration reduction. Additionally, the bed is hardened and precisely ground. The device bed is extremely resistant to twisting and does not vibrate, which is the basic condition for precise turning. - Central feed switching system, lead screw and feed shaft for threading - The digital readout works in (3) three axes of movement: longitudinal, transverse, upper slide. The processed electronic signal from the optical rulers visualizes the obtained values ​​from movements along the axes on the digital screen. - The lathe is equipped with a high-quality, reinforced spindle bearing system. Modern main spindle bearing with ball bearings - Optimal work results are ensured by a large spindle passage of 105 mm, a 4000 mm center spacing, a 3-jaw lathe chuck of 320 mm, and a powerful 7.5 kW engine. - The rapid longitudinal and transverse feed system significantly shortens the machining time and increases productivity. - Hardened and ground gears in the spindle gear - ensures long-term stability of work. - Equipped with a lead screw and a feed shaft for threading, automatic longitudinal and transverse feed. - Easy adjustment of the spindle speed and automatic feed from the ergonomic control panel on the gear. - Possibility of machining a wide range of threads without the need to replace the change wheels in the guitar. Wide range of threads: metric (22) 1 - 14 mm, inch (25) 2-28 T.P.I, modular (18) 0.5-7 M.P., D.P. thread (24) 4-56 D.P. Turning right and left threads. - Thread turning clock designed for accurate counting of turns. The function is to save time so that in several passes you can unscrew the lead screw nut to manually quickly return the support to its original position. - The bed has a replaceable bridge for turning larger elements, e.g. a disc. This lathe model allows for machining with a maximum diameter of 870 mm with the bridge removed. Technical data Max. turning diameter over bed Ø660 mm Max. turning diameter over support Ø420 mm Max. turning diameter in bridge slot Ø870 mm Slot length 240 mm Centre spacing 4000 mm Max. turning length 3950 mm Spindle bore Ø105 mm Spindle taper diameter and angle Ø113 mm 1:20 Spindle nose D1-8 CAMLOCK Spindle speeds 12 speeds (36-1600 rpm) Number and range of longitudinal feeds 65 (0.063-2.52 mm/rev.) Number and range of cross feeds 65 (0.027-1.07 mm/rev.) Metric thread 22 (1-14mm) Inch thread 25 (28-2 TPI-pitches per inch) Modular thread 18 (0.5-7mm) DP thread 24 (56-4 DP) Rapid longitudinal feed 4.5 m/min. Rapid cross feed 1.9 m/min. Lead screw pitch 12 mm Dedjvw Abgepfx Al Nsch Spindle axis distance from tool surface 28 mm Tool dimension 25x25 mm Max. top slide travel 145 mm Max. cross slide travel 380 mm Tailstock quill diameter 75 mm Tailstock taper MT5 Max. tailstock quill travel 150 mm Tailstock cross travel ±15 mm Main motor S1/S6 7.5/9 kW / 400V Rapid feed motor 250W Coolant pump 60W, 25 L/min. Dimensions L/W/H 5500 x 1100 x 1450 mm Weight 5 200 kg

Condition: new, Year of construction: 2026, Industrial metal lathe CORMAK TORNADO 460x1500 - 2x larger casting and solid cast iron bed construction, equipped with a 12-speed gearbox with a powerful 5.5 kW/400V induction motor - maximum torque, large spindle passage 82 mm. Main advantages: - Versatile applications: The lathe is ideal for various tasks, such as turning internal and external surfaces, cones, metric, inch, modular and DP threading, polishing, drilling and broaching. - Stable construction: The 300 mm wide cast iron bed has been hardened and precisely ground, which ensures high vibration reduction and stable working conditions even under heavy loads. - Digital precision: The device is equipped with a digital readout on two axes (longitudinal, transverse), which visualizes the exact values ​​of shifts on the screen thanks to optical measuring lines. - High-quality spindle: Reinforced bearing system in the spindle and large passage of 82 mm guarantee optimum efficiency during work. The set also includes a 3-jaw lathe chuck with a diameter of 250 mm and a 4-jaw chuck with a diameter of 320 mm, a 5.5 kW motor. - Efficiency and productivity: The rapid longitudinal and transverse feed system on the joystick significantly shortens the machining time, and the hardened and ground gears in the spindle gear ensure durability and reliability for years. - Wide possibilities of threading: Thanks to the threading function (metric, inch, modular and DP), right and left, and the possibility of changing parameters without the need to replace gears, work becomes faster and more convenient. The range of supported threads includes, among others, metric (41) from 0.1 to 14 mm, inch (60) from 2 to 112 T.P.I., modular (34) from 0.1 to 7 M.P. and DP (50) from 4 to 112 D.P. - Precise counting of threads: The lathe is equipped with a thread turning clock, which allows for quick setting of the support in the original position after unscrewing the lead screw nut. - Ergonomics and ease of use: The intuitive control panel on the gear allows for quick adjustment of the spindle speed and automatic feed. Dodpfx Alovzzqbs Nsch - Machining of large elements: The replaceable bed bridge allows for turning large elements with a diameter of up to 690 mm and a length of 240 mm (with the bridge removed), which increases the range of the device's capabilities. Technical parameters: Turning diameter over bed ø460 mm Turning diameter over cross slide ø274 mm Turning diameter in recess diameter x width 690 mm x 240 mm Tipper height 230 mm Distance between centers 1500 mm Bed width 300 mm Maximum knife cross-section 25 x 25 mm Total cross slide feed 290 mm Total upper slide feed 120 mm Spindle bore diameter ø82 mm Spindle nose D1-8 Spindle socket (taper) ø90 (1:20) Number of spindle speeds 12 Spindle speed range 25-2000 rpm Screw diameter and threads ø35mm x 6mm Inch threads Pitch Pitch 2-112 TPI (thread per inch) (60) Metric threads 0.1-14mm (41) teeth per inch gear pitch dia. 4-112D.P. (50) Gear modules 0.1-7M.P. (34) Longitudinal feed 0.031-1.7mm/rev. (42) Cross feed 0.014-0.784mm (42) Total tailstock bearing liner feed 120mm Tailstock bearing liner diameter ø60mm MT gear modules no. 4 Spindle drive motor 5.5kW Coolant pump motor 0.09kW Machine dimensions (LxWxH) 2720x1040x1340mm Weight 2445kg

Condition: new, Year of construction: 2026, Industrial metal lathe CORMAK TORNADO 460x2000 Main advantages: - Versatile applications : The lathe is ideal for various tasks, such as turning internal and external surfaces, cones, metric, inch, modular and DP threading, polishing, drilling and broaching. - Stable construction : The 300 mm wide cast iron bed has been hardened and precisely ground, which ensures high vibration reduction and stable working conditions even under heavy loads. - Digital precision : The device is equipped with a digital readout on two axes (longitudinal, transverse), which visualizes the exact values ​​of shifts on the screen thanks to optical measuring lines. - High-quality spindle : Reinforced bearing system in the spindle and a large passage of 82 mm guarantee optimal efficiency during work. The set also includes a 3-jaw lathe chuck with a diameter of 250 mm and a 4-jaw chuck with a diameter of 320 mm , a 5.5 kW motor. - Efficiency and productivity : The rapid longitudinal and transverse feed system on the joystick significantly shortens the machining time, and the hardened and ground gears in the spindle gear ensure durability and reliability for years. - Wide possibilities of threading : Thanks to the threading function (metric, inch, modular and DP), right and left, and the possibility of changing parameters without the need to replace gears, work becomes faster and more convenient. The range of supported threads includes, among others, metric (41) from 0.1 to 14 mm, inch (60) from 2 to 112 TPI, modular (34) from 0.1 to 7 MP and DP (50) from 4 to 112 DP - Precise counting of turns : The lathe is equipped with a threading clock, which allows for quick setting of the support in the original position after unscrewing the lead screw nut. - Ergonomics and ease of use : The intuitive control panel on the gear unit allows for quick adjustment of the spindle speed and automatic feed. - Machining of large elements : The replaceable bed bridge allows for turning large elements with a diameter of up to 690 mm and a length of 240 mm (with the bridge removed), which increases the range of the device's capabilities. Technical parameters: Turning diameter over bed ø460 mm Turning diameter over cross slide ø274 mm Turning diameter in recess diameter x width 690mm x 240mm Canine height 230mm Distance between fangs 2000mm Bed width 300mm Maximum knife cross-section 25x25mm Total travel of the cross slide 290mm Total upper slide travel 120mm Spindle bore diameter ø82 mm Spindle tip D1-8 Dcodpfxev E Eiis Al Nsh Spindle socket (cone) ø90 (1:20) Number of spindle speeds 12 Spindle speed range 25-2000 rpm Lead screw diameter and threads ø35mm x 6mm Inch threads Pitch Pitch 2-112 TPI (threads per inch) (60) Metric threads 0.1-14mm (41) teeth per inch tooth pitch dia. 4-112D.P. (50) Gear modules 0.1-7M.P. (34) Longitudinal feed 0.031-1.7mm/rev (42) Cross feed 0.014-0.784mm (42) Total travel of the tailstock bearing liner 120mm Tailstock bearing sleeve diameter ø60 mm Gear modules MT No. 4 Spindle drive motor 5.5kW Coolant pump motor 0.09kW Machine dimensions (LxWxH) 3220x1040x1340 mm Weight 2785 kg

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, roll diameter: 50 mm, roll width: 410 mm, total width: 490 mm, total length: 3,360 mm, Interroll RM 8310_R24/48V Transfer Element Total length: 3360 mm We offer more than 100 meters of roller conveyors from Interroll – in various lengths, with or without drive, curves, adjustable legs, access flaps, inclined infeeds, transfer elements, etc. Dcjdpsv T Dwbefx Al Neh

Condition: used, Year of construction: 2011, machine/vehicle number: 0-201-50-1289, operating hours: 7,062 h, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,400 mm, controller model: POWERCONTROL PC 85, plate height: 300 mm, spindle speed (max.): 24,000 rpm, No minimum price – guaranteed sale to the highest bidder! CNC machining center for milling, drilling, and edge banding! The machine must be picked up between June 10, 2026, and June 30, 2026! TECHNICAL DETAILS Working area X-axis: 6,000 mm Working area Y-axis: 1,400 mm Maximum panel passage height: 300 mm Travel speed X-axis: 80 m/min Travel speed Y-axis: 80 m/min Travel speed Z-axis: 30 m/min Number of controlled axes: 5 axes Number of working stations: 4 Maximum edge height: 65 mm Number of drilling units: 1 Total number of drilling spindles: 21 Total number of vertical + horizontal spindles: 25 Number of milling spindles: 2 Total number of tool changer positions: 77 Barcode reader model: DATALOGIC Work table and workpiece clamping Number of rails: 12 Number of pumps: 1 Vacuum pump flow rate: 300 m³/h Positioning via NC Vacuum cups for workpiece clamping Positioning of vacuum cups via NC Drilling unit Drilling unit 1: Top Vertical drilling spindles: 21 Horizontal drilling spindles in X: 2 Horizontal drilling spindles in Y: 2 Total number of vertical + horizontal spindles: 25 Milling units Milling spindle 1: Top Number of controlled axes milling spindle 1: 5 Motor power milling spindle 1: 15 kW Speed milling spindle 1: 24,000 rpm Automatic tool changer Milling spindle 2: Top Dcodpoy Uviwjfx Al Nsh Number of controlled axes milling spindle 2: 4 Automatic tool changer milling spindle 2: Yes Motor power milling spindle 2: 11 kW Speed milling spindle 2: 12,000 rpm Edge banding unit Number of edge banding units: 1 Maximum panel height: 60 mm Model: POWER EDGE 360° Position: Mounted on the main beam of the machine Number of positions edge roller magazine: 2 Gluing unit Glue pot for hot melt adhesive Pre-melter for hot melt adhesive Tool magazines Number of tool magazines: 4 Positions tool magazine 1: 72 Position tool magazine 1: On the rear of the machine Positions tool magazine 2: 2 Position tool magazine 2: On the rear of the machine Positions tool magazine 3: 2 Position tool magazine 3: On the rear of the machine Positions tool magazine 4: 1 Use tool magazine 4: Only for saw unit D: 350 mm MACHINE DETAILS Control system: WINDOWS 10 Machine programming software: POWERCONTROL PC 85 EQUIPMENT Work table pod and rail NC-positioned workpiece clamping Vacuum cups Vacuum pump Drilling unit on top 2 milling spindles POWER EDGE 360° edge banding unit Glue pot for hot melt adhesive Pre-melter for hot melt adhesive Edge roller magazine 4 tool magazines Barcode reader DATALOGIC Protective net Chip conveyor CE marking Safety mats The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents, which are of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8527

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: M11360*17766, Year of construction: 2018, load capacity: 12,000 kg, lifting height: 6,500 mm, The technical data are taken from the original order confirmation. The seller cannot guarantee that these correspond to the current condition. TECHNICAL DETAILS Lifting capacity: 12,000 kg at a load center of 1,200 mm Mast: Duplex standard Lift height: 6,500 mm Collapsed height: 4,895 mm Extended height: 8,100 mm Tilt: 5° forward / 10° backward MACHINE DETAILS Dimensions (L x W x H): 5,205 x 2,550 x 2,905 mm Wheelbase: 3,500 mm Engine: Volvo TAD-871-VE / 6-cylinder / eco-friendly engine with CAN bus (EU Stage IV), 185 kW at 2,200 rpm, 1,160 Nm, displacement 7.7 L STEINWEG Stone Stack Grab Type HG1T-6000S TECHNICAL DETAILS Clamping range: 0.96–1.00 m Opening range: approx. 0.6–1.3 m Clamping height: 1.3 m Lifting capacity: 6,000 kg Double clamp bars: 1 pair, with cushioned plastic jaws, length 2.3 m Mounting: Pendulum suspension EQUIPMENT Manufactured in a robust and clean welded construction Splayed clamp arms mounted rotatably With hydraulic cylinders, required valves, pipes, and fittings Including oil pressure manometer and connection hoses to the rotator Additionally: one pressure gauge mounted 180° opposed to the standard manometer LIFTING ARM & EXTENSION TECHNICAL DETAILS Extension: 1.6–2.1 m Lifting capacity: 8,000 kg at an outreach of 1.6–2.1 m EQUIPMENT 1 piece forklift lifting arm, twin beam, with endless rotator and pendulum suspension Including connection hoses to forklift 1 piece hydraulic extension with telescopic cylinder 1 stabilizer (2 pcs) for pendulum motion compensation Integrated side shifter in slide guides, travel: 250 mm RADIO PRESSURE MONITORING (Clamping Pressure) Radio frequency: 868.4 MHz Ambient temperature range: -30°C to +85°C Power supply: Lithium battery 3.6 V Battery life: approx. 1 year at 5-second intervals EMC System / Cabin & Operation EMC system: Electronic control with 7" touch screen Driver's seat: BeGe 9100 Cabin: OPTIMA – ergonomic safety comfort cabin High noise and vibration damping Hydraulically tiltable to the side ADDITIONAL EQUIPMENT Front mud flaps Rear mud flaps Exterior mirrors on fender (high) Turbo II heavy-duty air filter Additional hydraulic functions Quick couplings on the fork carriage Accumulator/vibration damper 60 bar / 2 L in the lifting function Hydraulic oil tank pre-heating Additional LED headlights, 2 × on the mast Reversing alarm LED beacon Electrical cables over the mast Power connection 400 V, 3-phase Blue Spot front and rear EMC 107 electronic weight display (0.1 t) EMC 114 electronic joystick with RPM increase EMC 122 speed limiter 20 km/h, switchable to 15 km/h Electric seat heating DAB/analog radio incl. Bluetooth, MP3, AUX, USB, 2 speakers Intermittent wiper ACC air conditioning SMV universal mounting rail Dcedpfxey T Edhe Al Noh Movable A4 writing pad LED reading lamp Diesel parking heater + engine water heater Sun visor (roof/front) Panorama rearview mirror Preparation for attachments from other manufacturers Central lubrication base, 14 points

Condition: ready for operation (used), Year of construction: 2020, operating hours: 8,977 h, functionality: fully functional, machine/vehicle number: MM0008-000192, turning length: 1,020 mm, turning diameter: 540 mm, travel distance X-axis: 565 mm, travel distance Y-axis: 170 mm, travel distance Z-axis: 1,050 mm, controller model: FANUC Series 31i-MODEL B, TECHNICAL DETAILS Turning length: 1,020 mm Turning diameter: 540 mm Swinging diameter over the machine bed: 750 mm Swinging diameter over the top slide: 540 mm Swinging diameter over the cross slide: 270 mm Travel range X-axis: 565 mm Travel range Y-axis: 170 mm Travel range Z-axis: 1,050 mm Rapid traverse rate X-axis: 36 m/min Rapid traverse rate Y-axis: 26 m/min Rapid traverse rate Z-axis: 36 m/min Power of the spindle motor: 22 W Spindle speed main spindle (max.): 5,000 rpm Spindle bore: 76 mm Spindle speed milling spindle (max.): 12,000 rpm Bar passage: 76 mm Dcsdpfoy Tw Uljx Al Noh Bar diameter (max.): 65 mm Spindle nose: A2#6 Spindle diameter: 110 mm MACHINE DETAILS Control system: FANUC Series 31i-MODEL B Chuck outer diameter: 210 mm Type of input current: Three-phase Dimensions & Weight Dimensions (L x W x H): 4,850 x 2,525 x 2,805 mm Total weight: 12,000 kg Operating hours: 8,977 h EQUIPMENT Documentation/Manual

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, turning diameter: 220 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 240 mm, travel distance Y-axis: 90 mm, travel distance Z-axis: 580 mm, No minimum price – guaranteed sale to the highest bidder! The new price of the machine was €342,000! Due to inquiries, the auction has been extended by 2 weeks. TECHNICAL DETAILS Max. bore / max. passage: 220 mm Max. turning diameter: 220 mm Distance spindle nose – tailstock center: 614 mm Center distance: 800 mm Travel X1 and X2: 167.5 mm Travel X3: mm Travel Z1 and Z2: 515 mm Travel Z3: 580 mm Travel Y: +45 / -45 mm Rapid traverse X: 30 m/min Rapid traverse Z: 30 m/min Rapid traverse Y: 20 m/min Axis acceleration: 9.8 m/s² Main spindle Max. speed: 4,000 rpm Outer diameter front bearing: 170 mm Inner diameter front bearing: 110 mm Spindle nose: ASA 6" A2 Spindle inner diameter: 72.5 mm Draw tube bore: 66 mm Chuck diameter: 210 mm Chuck bore: 66 mm Spindle power max. / S3 25% / S1: 35.5 / 28.3 / 23.5 kW Spindle torque max. / S3 25% / S1: 205 / 180 / 150 Nm Counter spindle / Sub spindle Max. speed: 4,000 rpm Outer diameter front bearing: 170 mm Inner diameter front bearing: 110 mm Spindle nose: ASA 6" A2 Spindle inner diameter: 72.5 mm Draw tube bore: 66 mm Chuck diameter: 210 mm Dcsdpfx Ajy Ukhhjl Noh Chuck bore: 66 mm Power max. / S3 25% / S1: 35.5 / 28.3 / 23.5 kW Torque max. / S3 25% / S1: 205 / 180 / 150 Nm Tailstock / Counter support Morse taper: CM3 Tailstock travel: 580 mm Max. force: 500 kgf Turret / Tool holder Number of stations: 24 Tool cross-section: 20×20 / 25×25 mm Tool change time: 0.1 s Clamping force at 45 bar: 3,200 kgf Driven tools Number of rotary stations: 12 Max. speed: 12,000 rpm Power max. / S1: 14 / 10 kW Max. torque max. / S1: 42 / 32 Nm Liquids / Tanks / Supply Coolant tank, side: 510 l Coolant tank, rear: 330 l Hydraulic oil tank: 18 l Lubricating oil tank: 4 l Installed power: 87 kVA Operating voltage: 400 V, 50 Hz ±5% Optional voltage according to table: [230 V, 50 Hz ±5%] Max. ambient temperature: 35 °C MACHINE DETAILS Control model: FANUC 31iPLUS Dimensions & Weight Dimensions (L x W x H): 2,860 × 2,377 × 2,289 mm Total weight: 11,000 kg Internal volume: 1.7 m³ EQUIPMENT Coolant supply through left spindle Hainbuch AXZUG 65 collet chuck (standard) 2702/0008 for left spindle SMW-Autoblok BBD 175 3-jaw chuck 56 with a set of soft jaws for right spindle Measuring arm Hinged band chip conveyor with side discharge Upper turret station (T1) double high-pressure pump (6+15 bar, 55 l/min) Inner turret station (12) double high-pressure pump (6+15 bar, 55 l/min) Machine status light Automatic part unloader Part unloader with pneumatic opening and closing function for catching ejected parts Pneumatic part ejector for counter spindle with 100 mm stroke, stroke adjustment and end position sensor Unimag interface for bar feeder

Condition: excellent (used), Year of construction: 2000, Ref:11105 . 2000 Polar RA-4 Paper Jogger Comprising; Air table and left & right side flaps for smooth pile flow Tilting table with adjustable angle for light or heavy stock Tilt action to the left or right Dedpfx Aoy Uya Tel Noch Automatic air removing roller – various functions Including air table blower unit. N.B. In-house, 6 bar compressed air line required. Specification: Useable surface, Max: 90 x 115 cm Pile height, Max: 16.5 cm Power requirements : 3pH, 380-415V, 1.5kW. Space required (tilted): 124 x 155 cm.

Condition: good (used), mileage: 122,638 km, power: 338 kW (459.55 HP), first registration: 10/2017, fuel type: diesel, tire size: 385/55R22,5, axle configuration: 4x2, wheelbase: 5,500 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, total length: 9,650 mm, total width: 2,550 mm, total height: 3,920 mm, Year of construction: 2017, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking air conditioner, parking heater, power mirror, retarder, seat heater, tail-lift, traction control, trailer coupling, - Heated mirrors - Digital tachograph - Trip recorder (control unit) - Fixed - Halogen lamp - Tail lift - Manual - Radio/cassette - Sleeper cab - Lane keeping assist - Fabric - Auxiliary braking system Number of axles: 2, Configuration: 4x2, Unladen weight: 8900 kg, Gross vehicle weight: 18000 kg, Total tank capacity: 800 liters, Trailer coupling, Axle pin diameter: 40 DIN, Fifth wheel coupling: Fixed, Number of locks: 1, Winch pulling capacity: 392 tons, Suspension type: Full air, Cab type: Sleeper cab, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Parking cooler, Parking heater, Electric windows, Electric mirrors, Radio/cassette, GPS navigation, Color: White, Heated mirrors, Lighting type: Halogen lamp, Lane keeping assist, Climate control, Seat heating, Bluetooth, Engine power: 338 kW (453 hp), Fuel: Diesel, Euro: 6, Transmission type: AS-Tronic, Transmission type: ZF, Gears: 12, Auxiliary braking system, Retarder brand: Intarder, Power steering, ABS, ASR, Rotation: 1x20, System length: 81 cm, Central locking, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual, Tail lift, Tail lift design: under-folding tail lift, Tail lift load capacity: 2000 kg, Tail lift manufacturer: Dhollandia DHS08.20, Tail lift material: Aluminum, Tail lift size: 183 x 230, Spare wheel, Spare wheel tread: 3 % Transmission Transmission: ZF, 12 gears, Automatic Axle configuration Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire size: 385/55R22.5; Steered; Tire tread left: 3 mm; Tire tread right: 3 mm Axle 2: Tire size: 315/70R22.5; Double tires; Tire tread left inner: 3 mm; Tire tread left outer: 4 mm; Tire tread right inner: 3 mm; Tire tread right outer: 6 mm Weights Unladen weight: 8,900 kg Payload: 9,100 kg GVW: 18,000 kg Functional Tail lift: Dhollandia DHS08.20, under-ride flap, 2000 kg Loading platform height: 116 cm Maintenance APK (technical inspection): valid until 10.2026 Dedpfxezbxrts Al Nsch Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Identification License plate: KLEYN1 Kleyn Trucks is one of the world's largest independent used vehicle dealers. Here you can choose from a constantly changing stock of 1200 used trucks, tractors, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing stock • Recognizable quality • A good price • Correct business practices • We speak many languages • We understand our customers • Support with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete stock list: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Ask directly...

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,100 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, oil tank capacity: 600 l, power: 22 kW (29.91 HP), year of last overhaul: 2025, volume flow: 530 m³/h, For sale is a partially refurbished Presona baling press, with 50 t pressing force, 22 kW drive power, built in 2005 Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Djdpfezbxxajx Al Nsch Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the whirling unit replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), mileage: 523,533 km, first registration: 02/2019, fuel type: diesel, tire size: 295/80R22,5, axle configuration: 4x2, wheelbase: 6,180 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 10,500 mm, total width: 2,600 mm, total height: 3,970 mm, loading space length: 8,150 mm, loading space width: 2,440 mm, loading space height: 2,520 mm, Year of construction: 2019, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, power mirror, seat heater, tail-lift, traction control, - Heated mirrors - Digital tachograph - Trip recorder (control unit) - Fixed - Halogen lamp - Tail lift - Manual - Radio/cassette - Reversing camera - Sleeper cab - Lane departure warning system - Fabric - Blind spot sensor Number of axles: 2, Configuration: 4x2, Total tank capacity: 300 liters, Fifth wheel coupling: Fixed, Number of differentials: 1, Winch pulling capacity: 397 tons, Suspension type: Air suspension, Type of cab: Sleeper cab, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Radio/cassette, Color: White, Heated mirrors, Reversing camera, Lighting type: Halogen lamp, Lane departure warning system, Climate control, Seat heating, Bluetooth, Blind spot sensor, Fuel: Diesel, Euro: 6, Transmission type: AS-Tronic, Transmission type: ZF, Gears: 12, Power steering, ABS, ASR, System type: Lamberet HB-5T8-1C, Central locking, Seat configuration: 1+1, Seat cover: Fabric, Seat adjustment: Manual, Refrigeration unit manufacturer: Carrier, Refrigeration unit: Diesel/electric, Unit hours / electric: 14, Unit hours / diesel: 7061, Body insulation, Heating, Wall thickness: 50 mm, Type of cooling: Cooling and freezing, Day/night cooling: Day/night cooling, Additional evaporator, Tail lift, Tail lift design: under-folding tail lift, Load capacity of the tail lift: 2000 kg, Tail lift manufacturer: Dhollandia DHSM.20, Tail lift material: Steel and aluminum, Tail lift size: 181 x 240 Transmission Transmission: ZF, 12 gears, Automatic Axle configuration Tire size: 295/80R22.5 Brakes: Disc brakes Axle 1: Steered; Tire tread depth left: 6 mm; Tire tread depth right: 8 mm; Suspension: Leaf spring suspension Axle 2: Double tires; Tire tread depth left inner: 6 mm; Tire tread depth left outer: 11 mm; Tire tread depth right inner: 7 mm; Tire tread depth right outer: 12 mm; Suspension: Air suspension Functional Tail lift: Dhollandia DHSM.20, under-ride flap, 2000 kg Height of loading area: 123 cm Refrigeration unit: Diesel and electric (7061 operating hours diesel; 14 electric) Wall thickness: 50 mm Condition Technical condition: good Optical condition: good Damage: none Number of keys: 3 Financial information Leasing price: €585 per month (default, 60 months); Inquire about further information and conditions Identification License plate: KLEYN1 Kleyn Trucks is one of the largest independent used vehicle dealerships in the world. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? It’s simple! • Large, rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers Dedpoza Tpdsfx Al Noch • Support with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is...

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,507 kg, axle configuration: 3 axles, first registration: 03/2019, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2019, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - Schmitz Rotos Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 45 mm Djdpfezbk Rhex Al Nsch Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Double deck with 22 beams Loading capacity 33 euro paletts Length/width/heigth - 1340cm / 249cm / 265 cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 410 kg 3 axles Pallet rack for 36 Euro pallets

Condition: used, mileage: 722,521 km, power: 206 kW (280.08 HP), first registration: 05/2010, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 6x2, wheelbase: 5,550 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro5, suspension: air, total length: 11,900 mm, total width: 2,600 mm, total height: 3,780 mm, loading space length: 9,730 mm, loading space width: 2,480 mm, loading space height: 2,300 mm, Year of construction: 2010, Equipment: ABS, air conditioning, cruise control, electric window regulation, power mirror, seat heater, tail-lift, traction control, - Heated mirrors - Digital tachograph - Tachograph (control unit) - Fixed - Halogen lamp - Short cab - Tail lift - Manual - Radio/Cassette - Fabric - Central lubrication Dsdpfexc U S Rox Al Njch Number of axles: 3, Configuration: 6x2, Unladen weight: 13,300 kg, Gross weight: 26,000 kg, Total tank capacity: 350 liters, Fifth wheel: Fixed, Number of diff locks: 1, Central lubrication, Suspension type: Full air suspension, Cab type: Short cab, Cruise control, Tachograph (control unit), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Radio/Cassette, Color: White, Heated mirrors, Lighting: Halogen lamp, Speed limiter, Climate control, Seat heating, Engine power: 206 kW (276 hp), Fuel type: Diesel, Euro: 5, Transmission: Opticruise, Gearbox type: Scania, Speed limiter, Gears: 12, Power steering, ABS, ASR, Starter battery, Seat arrangement: 1+1, Seat material: Fabric, Seat adjustment: Manual, Cooling unit manufacturer: Frigo Block, Cooling unit model: FK25SL, Cooling unit: electric, ATP condition: 00, Body insulation, Heating, Wall thickness: 45 mm, Cooling method: Refrigerated, Day/Night cooling: Yes, Auxiliary evaporator, Tail lift, Tail lift version: Rear flap, Tail lift capacity: 2,500 kg, Tail lift manufacturer: ZEPRO Z 250-155 MA, Tail lift material: Aluminum, Tail lift size: 236 x 251 Transmission Transmission: SCA, 12-speed, automatic Axle configuration Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire size: 315/80R22.5; Steered; Left tire tread: 10 mm; Right tire tread: 14 mm Axle 2: Tire size: 315/70R22.5; Double tires; Left inside tread: 7 mm; Left outside tread: 8 mm; Right inside tread: 5 mm; Right outside tread: 5 mm Axle 3: Tire size: 315/70R22.5; Lift axle; Steered; Left tread: 9 mm; Right tread: 11 mm Weights Unladen weight: 13,300 kg Payload: 12,700 kg Gross weight: 26,000 kg Functional Tail lift: ZEPRO Z 250-155 MA, Rear flap, 2,500 kg Loading platform height: 126 cm Cooling unit: electric Wall thickness: 45 mm Condition General condition: average Technical condition: average Visual condition: average Damages: none Number of keys: 2 Identification Registration: KLEYN1 Kleyn Trucks is one of the world’s largest independent used vehicle dealers. Here, you can choose from a constantly changing inventory of 1,200 used trucks, tractors, and trailers. Our range includes all European makes, model years, and price categories. Why buy at Kleyn Trucks? It's simple! • Large, rapidly changing stock • Recognizable quality • Competitive prices • Reliable business conduct • We speak many languages • We understand our customers • Support with import and transport • (Export) license plates arranged quickly • Expert technical services • The security of 'recognizable quality' • And much more.... Please visit our website for special offers and our full inventory: Leasing via Kleyn Trucks is possible in most European...