Used Fliegl Sds 470 T Standard for sale (77,107)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,860 kg, maximum load weight: 28,140 kg, overall weight: 35,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235/75 17,5, tire condition: 100 %, Additional information Chassis Fine-grained steel welded construction, kingpin plate with 2 replaceable kingpins Recessed rail for loading ramps on the rear extension over the entire width, outer edge beveled to prevent damage. Reinforced frame for vehicle loading Outer frame with load-lock profile approx. every 400 mm for securing lashing straps 10 pairs of lashing eyes recessed on the top/outside of the outer frame, each 10 tons, starting after the neck area 24-ton, 2-speed support jacks, single-sided operation, with a flat mounting plate 2 wheel chocks with holder Aluminum side impact protection Galvanized steel underride protection Sheet metal as a splash guard riveted to the bottom, in the neck area above the center of the bogie axle and above the axle assembly Semi-elliptical fenders with anti-spray flaps according to EC Container locking system, 4 pairs of locking recesses recessed in the floor for 2 x 20 ft or 1 x 40 ft containers, 4 pairs of container locking adapters (additional cross supports required at the front and rear of the container; the container must rest evenly across its width in conjunction with the locks; cross supports are not included) Attention! Damage to the platform floor is possible due to the cross supports! Rear extension, mechanical, with hand crank, extendable by approx. 1500 mm, lockable every 500 mm, including extendable underride protection with lighting (then the rear ladder is omitted) Covered with platform in the wheel arch area, with steel diamond plate in the center. Attention! Ramp loading at the rear is only possible with the rear extension in the retracted position! Storage space for loading ramps integrated in the rear extension, only usable when the rear extension is extended 1000 mm – then there is an overhang For transporting the ramps with the rear extension retracted, there is storage space for the ramps on the right side of the frame in front of the axles 1 pair of ramps, 3000 mm long, 300 mm wide, load capacity per pair 6000 kg (recessed rail for ramps on the rear extension) Rear slope to approx. 500 mm Electric winch, 24 volts, pulling force approx. 8165 kg, mounted in the center at the front, operated with a wireless remote control, cable length 35 m x approx. 10 mm, with a cable guide and removable guide rollers Axles + Suspension Pjdolf Dtmopfx Am Tjgp Drum brake axles Axle/suspension laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and start-up assistance, activated by 3x braking (start-up assistance functions up to an axle load exceedance of 30% and a speed of max. 25 km/h) with central lift arm Axle lift below the recommended ride height, therefore no guarantee for tire damage Braking system 2-line pneumatic braking system Color-coded lines for easy service. Spring parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connecting cable Attention: The trailer may only be pulled by towing vehicles which guarantee the effectiveness of the ABS! with raise and lower valve Vehicle - driving stability system Wheels and tires 235/75 17.5, manufacturer's choice Steel rims in twin arrangement, factory silver Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front in LED 2 white/red marker lights at the rear 2 additional LED work lights at the rear, switched via the revers

Condition: used, empty load weight: 6,760 kg, maximum load weight: 22,240 kg, overall weight: 29,000 kg, axle configuration: 2 axles, first registration: 05/2007, loading space length: 13,600 mm, loading space width: 2,480 mm, loading space height: 1 mm, suspension: air, tire size: 385/65R22.5, color: blue, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2 axles, BPW axles, air suspension, forced steering on the last axle, lift and lower function, ABS (anti-lock braking system), lashing points, underride guard, supports, storage compartment, stakes. Superstructure: Semi-trailer for steel transport/long material transport, disc brakes! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Podpfji Rl Uhjx Am Tsgp

Condition: used, empty load weight: 3,500 kg, maximum load weight: 8,300 kg, overall weight: 11,800 kg, axle configuration: 2 axles, first registration: 10/2009, loading space length: 6,200 mm, loading space width: 2,440 mm, loading space height: 3,000 mm, suspension: air, tire size: 235/75R17,5, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, with tarpaulin and side rails, 2 axles, tandem axle, air suspension, lifting and lowering mechanism, ABS (anti-lock braking system), Edscha, lashing eyes, side protection, front support, rear support, adjustable drawbar. Pgodpfsi Rpx Nex Am Top Superstructure: Flatbed + tarpaulin trailer for glass transport with Edscha cover. Tires approximately 50% remaining. ACCESSORY INFORMATION WITHOUT GUARANTEE; subject to changes, prior sale and errors.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,230 kg, maximum load weight: 14,770 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 10,020 mm, total width: 2,550 mm, total height: 870 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, *Wechel Central-Axle Trailer Chassis Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear Locks height-adjustable by approx. 120 mm for parking height 1070 mm, lifting height then approx. 1150 mm, and driving height then approx. 990 mm; foldable with center supports. Includes guide rollers that can be inserted into center supports (locking mechanism from the Vario chassis at the rear) 4 container locks with sturdy arms on a 20" base for swap bodies 7.15 / 7.45 and 7.82 1 pair of front transmission support legs, with straight lower section and single-sided operation on the right rear Foldable rear support 2 wheel chocks with holder Aluminum side impact protection Steel underrun protection Half-shell fenders 1 spare wheel holder for 1 electric bike, with wheel mounting kit 1 plastic toolbox, with insert shelf, W=620/H=360/D=440 mm, lockable with a padlock. (Lock not included) *Towing equipment for central-axle trailer Towing beam with certified 50 mm tow eye, freight transport version (not suitable for trucks with tail lifts; detailed verification may still be required when placing an order) Towing beam lower coupler, free towing beam length approx. 2200 mm Folding bracket with spring support on the towing beam, for routing the connection cables to the truck *Axles + Suspension SAF drum brake axles “Laser-aligned axles/chassis” Reduces tire wear and fuel consumption Air suspension *Brake System 2-line compressed air brake system Color-coded lines for easy servicing. Spring-loaded parking brake 2 non-reversible coupling heads at the front, with connecting lines to the motor vehicle, connection at FR-right EBS, Electronic Brake System with EBS connector at the front, with connecting cable, connection at FR-right Caution: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lift/lower valve, hold function in both lower and lift positions Vehicle – Vehicle Stability System *Wheels and Tires 235/75 R17.5, brand selected by the manufacturer Steel rims in twin configuration, factory silver *Electrical System Pgjdpfx Amezd Uyqe Tsp 24 volts, multi-chamber lights, yellow LED side lighting 2 white front position lights 2 white/red rear lane-keeping lights 1 x 15-pin connector at the front, with connecting cable, connection at the rear right 2 additional LED work lights at the rear, activated via the reverse light 1 LED work light at the front, centered between the cross members, shining toward the rear, activated via the reverse light *Operating Instructions The specified total weight is technically possible; however, depending on the cargo, the total weight may not be reached while complying with the permissible axle, support, and fifth-wheel loads. (Poor handling and tracking may result from improper load distribution) *Country of Registration/License Plates Germany With DEKRA approval and certification (in accordance with §13 EG-FGV) 24/7 Service Hotline Prepared for single-line license plate holders Contour markings with reflective strips in accordance with ECE R 048, white on the sides and red at the rear *Paint Finish Frame Hot-dip galvanized or painted according to customer specifications

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,000 kg, maximum load weight: 15,000 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 9,470 mm, total width: 2,550 mm, total height: 1,040 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. *Chassis with swivel turntable Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear 1 pair of removable guide rollers, additional 4 container locks with sturdy 20"-based arms for swap bodies 7.15 and 7.45 Swivel frame with heavy-duty ball bearing swivel ring Wheel chocks with holder Aluminum side impact protection Side impact protection set inward for optimal clearance to the swap body supports Steel underrun protection Underrun protection shortened for optimal clearance to the swap body supports; lighting system mounted in a protected position Rear mud flaps across the entire width (not compatible with forklift mount) Quarter-shell front fenders and half-shell rear fenders *Towing equipment for trailer turntable Towing fork with certified 40 mm tow eye Towing fork mechanically adjustable in length by approx. 6 x 100 mm (approx. 1900–2500 mm); towing fork length set to 2200 mm *Axles + Suspension BPW or SAF drum brake axles, at the manufacturer’s discretion “Laser-aligned axles/chassis” to reduce tire wear and fuel consumption Air suspension *Brake System 2-line compressed air brake system Color-coded piping for easy maintenance. Air reservoir: 180 liters Spring-loaded parking brake 2 non-reversible coupling heads at the front, with connecting lines to the tractor unit, EBS, Electronic Brake System with EBS connector at the front, with connecting cable, Caution: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With raise/lower valve, hold function in both lower and raise positions Axle load detection via EBS CAN bus signal, for display in the cab; the truck must be equipped accordingly; no truck installation (no calibrated scale) Tire pressure monitoring system *Wheels and tires 235/75 R17.5, brand selected by the manufacturer Steel rims in twin configuration, factory silver Psdpjzd Uvljfx Am Tegp *Electrical System 24 volts, Aspöck Eco LED II multi-chamber lights, yellow LED side lighting linked to the turn signals (“flashing side lights”), LED license plate lighting, (Note: With certain towing vehicles, false diagnostics may occur even though the system is functioning properly) 2 white LED front position lights 2 white/red rear lane-keeping lights (LED) 2 x 7-pin reverse-polarity-protected connectors at the front, with connecting cable, LED work lights on both sides (activated by the reverse light) 2 additional LED work lights at the rear, activated by the reverse light 1 LED work light at the front, centered between the crossbars, shining toward the rear, activated by the reverse light *Country of Registration/License Plates Germany with DEKRA approval and certification (in accordance with §13 EG - FGV) 24/7 service hotline prepared for single-line license plate holders Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red at the rear *Paint Finish Frame hot-dip galvanized or painted according to customer preference

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,220 kg, maximum load weight: 14,780 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 10,020 mm, total width: 2,550 mm, total height: 1,070 mm, suspension: air, tire size: 445/45 R19,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. *Chassis for swap body with central axle trailer Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear Swap Guard – swap body guide, in front of and behind each container lock 4 container locks with sturdy 20"-based arms for 7.15, 7.45, and 7.82 swap bodies 1 pair of front gear support legs, with straight lower section and single-sided operation on the right side 2 wheel chocks with holders Aluminum side impact protection Steel underrun protection Rear mud flaps across the entire width (not compatible with forklift mount) 4 half-shell fenders Mud flaps Spare tire mount for 1 electric bike, with wheel mounting kit Towing equipment for central-axle trailer Towing beam with certified 50 mm tow eye, freight forwarding version (not suitable for trucks with tail lifts; detailed verification may still be required on a case-by-case basis) Towing bar coupler, free towing bar length approx. 2200 mm Folding bracket with spring assistance on the towing bar, for routing the connection cables to the truck *Axles + Suspension SAF disc brake axles “Laser-measured axles/chassis” reduces tire wear and fuel consumption Air suspension *Brake System 2-line compressed air brake system Color-coded piping for easy maintenance. Air reservoir capacity: 208 liters Spring-loaded parking brake 2 non-reversible coupling heads at the front, with connecting lines to the motor vehicle, connection at FR-right Psdpfszd Tw Isx Am Tsgp EBS, Electronic Braking System with EBS connector at the front, including connecting cable, connection at FR-right Caution: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lift/lower valve, hold function in both lower and lift positions *Wheels and Tires 445/45 R19.5", brand selected by the manufacturer Steel rims, factory silver *Electrical system 24 volts, 4 x 3-chamber lights + 1 round backup light and + 1 round rear fog light, yellow LED lighting on the sides 2 white front position lights 2 white/red rear lane-keeping lights 1 x 15-pin connector at the front, with connecting cable, connection at the rear right 2 Additional LED work light(s) at the rear, activated via the reverse light *Country of registration/license plates Germany With DEKRA approval and certification (in accordance with §13 EG-FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips per ECE R 048, white on the sides and red at the rear *Paint finish Frame Hot-dip galvanized or painted per customer request

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,250 kg, maximum load weight: 14,750 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 10,020 mm, total width: 2,550 mm, total height: 1,120 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. *Chassis for central-axle swap trailers Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable Pair of removable guide rollers, front and rear 4 container locks with sturdy 20"-based arms for 7.15 m, 7.45 m, and 7.82 m swap bodies (Note: When used in combination with the impact guard, the guard protrudes beyond the 7.15 m swap body) 1 pair of front gear-driven support legs, with straight lower section and single-sided operation on the right side 1 pair of rear gear-driven support legs, with straight lower section and single-sided operation on the right side Side impact protection set inward, for optimal clearance to the swap body supports Steel underrun protection Rear mud flaps across the entire width *Towing equipment for central-axle trailers Towing beam with certified 50 mm tow eye, freight forwarding version Towing beam clamped/bolted, easily replaceable and partially adjustable in length! Lower coupler on towing beam, free towing beam length approx. 2200 mm Folding bracket with spring support on the towing beam, for routing the connection cables to the truck *Axles + Suspension SAF disc brake axles “Laser-aligned axles/chassis” reduces tire wear and fuel consumption Air suspension without lift axle *Brake System 2-line compressed air brake system Color-coded lines for easy servicing. Air reservoir: 208 liters Spring-loaded parking brake Duomatic connection at the front, with connecting line to the tractor unit, connection at the rear right 24-volt EBS, electronic braking system with EBS connector at the front, with connecting cable, connection at the rear right Caution: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lift & lower valve, hold function in both lower and lift positions Vehicle – Vehicle Stability Control System Brake release function via a pushbutton on the vehicle next to the lift & lower valve, for releasing the brake while coupled; EBS power supply must be ensured! *Wheels and Tires 385/55 R22.5" Manufacturer's choice Steel rims, factory silver *Electrical System 24 volts, multi-chamber LED lights, yellow LED side lighting, LED license plate lighting, (Note: With certain towing vehicles, false diagnostics may occur even though the function is working properly) 2 white LED front position lights 2 white/red LED rear lane-keeping lights 1 x 15-pin connector at the front, with connecting cable, connection on the right rear Additional LED work light(s), recessed and integrated into the rear, activated via the reverse light LED work light at the front, centered between the cross members, shining toward the rear, activated via the reverse light *Country of Registration/License Plates Germany With DEKRA approval and certification (per §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Warning sign per ECE - 70 ADR warning sign at the rear, foldable Pgedpfxjzd Trrj Am Tjp Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red at the rear *Paint finish Frame Hot-dip galvanized or painted according to customer specifications

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,900 kg, maximum load weight: 34,100 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 9,300 mm, loading space width: 2,420 mm, loading space height: 2,150 mm, loading space volume: 49 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 4,040 mm, suspension: air, tire size: 385/65 r22.5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Further Information Chassis Fine-grain steel welded construction, lightweight design, fifth wheel plate with interchangeable 2 kingpins Curved front end, patented 24-ton, 2-speed landing gear, single-sided operation, with straight lower part, without push-pull compensation Wedge supports + holder Under-run protection, foldable Semi-shell fenders Integrated fender holder, surface repels stones Towing hook at the rear Axles + Suspension SAF disc brake axles Axle/suspension laser-aligned, reduces tire wear and fuel consumption Air suspension 1st axle: automatic lift axle, including forced lowering and starting assist, activated by 3x braking (starting assist functional up to an axle load exceeding 30% and a speed of max. 25 km/h) Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking System 2-line pneumatic braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be pulled by tractor units that ensure the effectiveness of the ABS! With lifting and lowering valve Vehicle - Driving Stability System Wheels & Tires 385/65R22.5, manufacturer's choice Polished aluminum rim, manufacturer's choice Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pin socket at the front, without connection cable Hydraulics Podpfx Amoi Ri Ids Tjgp Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK screw-on fitting, fixed part, NW 48 mm Actuation hydraulically via truck auxiliary drive Tippers Aluminum box tipper, sloping front wall, 5 mm thick, with external side walls made of 30 mm hollow profile, cleanly welded, with upper edge profile that prevents spillage of bulk goods. Interior with access ladder on the front wall Shovel and broom holder on the outside of the front wall Greenline - conical and aerodynamic tipper body shape Membrane - rear wall Rear wall as a swing-open flap with double-joint hinge, externally mounted with 2-fold hook locking. Rear wall with rubber seal Note! Heat-resistant up to max. 170°C! Floor continuously 5 mm thick, Brinell 110 Note! Only for the transport of sand, gravel and rolled gravel with a maximum grain size of up to 20 mm! All other transported goods are excluded from the warranty! Standing platform with access ladder, connecting plate for air/electricity and brake with large space for the best possible operation. Roll tarp, single-sided for storing on the right-hand side (when facing forward), with central locking on the left-hand side (when facing forward) Operating instructions For the transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to protect against rust The specified total weight is technically possible, but depending on the cargo, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor driving and handling behavior possible due to incorrect load distribution) Country of registration / Signs Germany with Dekra approval and certificate (according to §13 EG - FGV) 24/7 service hotline pre

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,980 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space width: 2,420 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,240 mm, suspension: air, tire size: 385/65 r22.5, tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Pgedpfx Aji Ri H Sem Tsp More information Chassis Fine-grained steel welded construction, lightweight design, kingpin plate with 2 interchangeable kingpins Curved front end, patented without support leg Wheel chocks + holder Underrun protection, foldable Semi-shell fenders integrated fender holder, surface resistant to stone chipping Towing hook at the rear Axles + Suspension SAF disc brake axles Axle/chassis laser-measured to reduce tire wear and fuel consumption Air suspension 1st axle automatic lift axle, incl. forced lowering and starting assist, actuated by 3x brakes (starting assist functional up to an axle load exceedance of 30% and a speed of max. 25 km/h) Hot-dip galvanized lift axle mechanism Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 tamper-proof coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable with lifting and lowering valve Vehicle driving stability system Wheels & tires 385/65 R22.5, manufacturer's choice Polished aluminum rim, manufacturer's choice Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pin socket at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chrome plated, with HDK screw connection, fixed part, NW 48 mm. Actuation via hydraulic system connected to the truck's auxiliary drive Tippers Sloping front wall 5 mm thick, with external side walls made of 30 mm hollow chamber profiles, neatly welded, with upper edge profile to prevent material spillage. Inside with a ladder on the front wall Shovel and broom holder on the outside of the front wall Greenline - conical and aerodynamic tipper body shape Membrane - rear wall Rear wall as a hinged flap with double-joint hinge, externally supported with a double hook lock. Rear wall with rubber seal Note! Heat resistant up to max. 170°C! Floor continuously 5 mm thick, Brinell 110 Note! Only for the transport of sand, gravel and rolled gravel with max. grain size up to 20 mm! All other transport goods are excluded from the warranty! Standing platform with ladder, connection plate for air/electric and brake with large clearance for best possible operation. Rollover tarpaulin, one-sided for laying down on the right-hand side, with central locking on the left-hand side Operating instructions For the transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chrome plated piston rod to protect against rust The specified total weight is technically possible, depending on the cargo, the total weight may not be reached while observing the permissible axle/support and saddle loads. (Poor driving and handling behavior due to incorrect load distribution possible) Country of approval/ Signage Germany with Dekra approval and certificate (according to §13 EG - FGV) 24/7 service hotline prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paintwork Frame DB 7350 Novagrau Tipper body R

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,400 kg, maximum load weight: 33,600 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 2,960 mm, suspension: air, tire size: 385/65 R22.5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications. ## Chassis * High-tensile fine-grain steel welded lightweight construction * Fifth wheel plate with replaceable 2” king pin * Patented curved front end design * Parking in loaded condition not permitted; when unhooked, the vehicle must be positioned with a rearward tilt * Foldable underrun protection * Integrated mudguard mounting system with stone-repellent surface * Asphalt specification spray flaps behind last axle, hinged to mudguards with upper locking option; shortened mudguards ## Axles & Suspension * Disc brake axles with 430 mm brake discs * Laser-aligned axles and running gear for reduced tyre wear and fuel consumption * Off-road axle specification * Air suspension system * 1st axle as automatic lifting axle with forced lowering and traction aid * Galvanised lifting axle mechanism ## Braking System * Dual-line compressed air braking system with colour-coded piping for simplified maintenance * Spring-loaded parking brake * Two non-interchangeable coupling heads at the front (without connecting lines) * 24 V EBS electronic braking system with front EBS socket (without connecting cable) * Raise-and-lower valve integrated * Vehicle stability control system ## Wheels & Tyres * 385/65 R 22.5 tyres * Steel rims, factory silver finish * TPMS (Tyre Pressure Monitoring System) according to ECE R141, displayed via truck EBS system ## Electrical System * 24 V electrical system * LED multi-chamber rear lights * Yellow LED side marker lights linked to indicators (flashing side marker lights) * 2 white LED front position lights * 2 white/red LED rear outline marker lights * 2 × 7-pin front sockets ## Hydraulic System * High-pressure tipping cylinder, max. 250 bar * HDK screw coupling, fixed section, NW 48 mm * Hydraulic operation via truck PTO (power take-off) ## Tipping Body – Stone Master Thermo Body * Round steel body in “Stone Master Design” made of high wear-resistant HB 400/450 steel * Sloped front wall with external hydraulic cylinder mounting Pgjdpfxoi Rix Ij Am Tep * Front wall access ladder included * “Membrane” tailgate design: externally mounted pendulum rear door with double hook locking system * Two clamping screws with lever fasteners on lower side * Side walls: 4 mm continuous steel * Floor: 4–5 mm steel, wear- and weight-optimised construction * Fully insulated Fliegl Asphalt Profi Thermo body * Insulation on front, sides, bottom and rear (Fliegl Isotherm system) * BASIC cover system with tarpaulin enclosure * Standing platform with access steps * Connection panel for air, electrics and braking system with large free working space for optimal handling * Sliding tarpaulin system, one-sided storage on RHS (right-hand side), with central locking on LHS (left-hand side) ## Registration & Compliance * Germany * EC type approval according to 2007/46/EC * Body strength certification according to EN 12642 * 24/7 service hotline * Manufacturer certification for thermal vehicles according to RS 10 – 2013 * Prepared for single-line licence plate holder * Warning plate according to ECE R70 ## Optional Thermo Insulation Packages * BASICplus: sheet metal cladding * PREMIUM: stainless steel cladding

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,650 kg, maximum load weight: 9,850 kg, overall weight: 13,500 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 450 mm, total length: 6,900 mm, total width: 2,550 mm, total height: 1,680 mm, suspension: steel, tire size: 285/70 R19,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Central-Axle Tipping Trailer Chassis Welded steel construction, continuous tipping shaft at the rear with 80 mm ball-type tipping bearing Front transmission support leg Foldable rear support 2 wheel chocks with holders Steel underrun protection Rear mud flaps across the entire width Quarter-shell fenders Lockable storage compartment for ramps beneath the loading area 1 plastic toolbox, with insert shelf, W=620/H=360/D=440 mm, lockable with a padlock Note! The side panel touches the storage compartment when folded down. Lockable storage compartment for ramps beneath the cargo area Towing Equipment for Central-Axle Trailers Towing beam with certified 40 mm tow eye Towing beam height-adjustable via spindle, max. adjustment range 300 mm Axles + Suspension SAF drum brake axles “Laser-measured axles/chassis” reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber mounts and mechanical axle load compensation (rocker compensation) Wheels and Tires 285 / 70 R 19.5" as selected by the manufacturer Steel rims in factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 non-reversible coupling heads at the front, with connecting lines to the tractor unit, ABS and ALB, with ABS connector at the front, with connecting cable Caution: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrical System 24 volts, multi-chamber lights, yellow LED side lighting 2 white front position lights 2 white/red rear lane-keeping lights 2 x 7-pin reverse-polarity-protected connectors at the front, with connecting cable Hydraulics Three-way tipping mechanism, hydraulic multi-piston press with stroke limiter and safety cable, low-pressure cylinder up to 170 bar max., without throttle valve. If necessary, this must be retrofitted to the truck. Hydraulic operation via truck PTO Hydraulic connection with SVK coupler, size 10/3, including connecting hose Tipping platforms Sturdy tipping platform with 4 mm steel plate floor, steel sidewall structure, continuous sidewalls that are fold-down and pivot-mounted with a central lock at the bottom. Rear corner stanchions are plug-in type. Rear wall folds down and is mounted on swing bearings, with a central lock at the bottom. Bed length approx. 5,000 mm; side walls with 6 hinges at the bottom. Sidewall retraction springs Bed width 2,420 mm 5 pairs of lashing eyes in the floor, 5 to each Pgodpjzd D Scjfx Am Top Operating Instructions The specified gross weight is technically possible; however, depending on the cargo, the gross weight may not be achieved while complying with the permissible axle, support, and fifth-wheel loads Country of Registration/Plates Country of registration: Germany With DEKRA approval and certification (pursuant to §13 EG-FGV) 24/7 Service Hotline Prepared for single-line license plate holder Contour marking with reflective strips per ECE R 048, white on the sides and red at the rear Paint finish Frame Hot-dip galvanized, including passivation “15-year warranty against through-corrosion” Sidewall/deck Painted in the color of your choice

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 1,900 kg, maximum load weight: 18,100 kg, overall weight: 20,000 kg, axle configuration: 1 axle, total length: 7,650 mm, total width: 2,550 mm, tire size: 385/65 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. *Semi-Trailer Container Chassis Fine-grained steel welded construction, semi-trailer plate with replaceable 2 kingpins, 2 pairs of removable guide rollers 4 container locks with sturdy arms based on a 20-standard for 7.45- and 7.82-swap bodies 24-metric-ton, 2-speed support jack, single-side operation, with straight lower section, without thrust compensation 2 wheel chocks with holders Aluminum side impact protection Galvanized steel underrun protection Half-shell fenders with anti-splash flaps *Axle + Suspension Disc brake axle, with 430 mm disc diameter, Pgodoi Rixnjpfx Am Top Air suspension with lift & lower valve, with hold function for lift & lower *Wheels and Tires 385/65 R 22.5 Steel rims, factory silver *Braking system 2-line compressed air braking system Spring-loaded parking brake 2 reverse-proof coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connecting cable Caution: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! *Electrical System 24 volts, multi-chamber lights, yellow LED side lighting 2 white front position lights 2 white/red rear lane-keeping lights 2 x 7-pin reverse-proof sockets in the front, without connecting cables *Registration / Plates Country of registration: Germany With DEKRA inspection and certification (per §13 EG - FGV) Prepared for single-line license plate holder Contour marking with reflective strips per ECE R 048, white on the sides and red at the rear Warning sign per ECE - 70 *Paint Finish Frame: Hot-dip galvanized or painted per customer request Support feet: Black coated

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 7,500 kg, maximum load weight: 18,700 kg, overall weight: 26,200 kg, axle configuration: 2 axles, total length: 12,400 mm, total width: 2,550 mm, tire size: 205 / 65 r 17,5, Additional Information Chassis, Saddle, Haulage Company Fine-grained steel welded construction, saddle plate with 2 replaceable kingpins, rear slope to approx. 1920 mm, continuous lashing rail for ramps at the rear and front on the gooseneck, sliding rollers at the rear, low-bed to the axle group after the slope. Drawing approval required from the customer in case of an order! Pair of lashing points recessed in the outer frame at the top and side, 10 tons each. Pair of lashing eyes recessed in the outer frame on the gooseneck, 5 tons each. 24-ton, 2-stage support winch, single-sided operation, with straight lower part, without stroke compensation. Foldable rear support, mounted externally. Wheel chocks with holder. Aluminum side impact protection. Steel underrun protection for EC, if technically possible. Quarter panel fenders. With anti-spray flaps according to EC. 1 pair of wheel recesses recessed in the low-bed area after the gooseneck, sloped for entry. Length at the bottom approx. 1840 mm, depth of wheel recesses approx. 200 mm. 2nd pair of wheel recesses on the rear slope. Depth approx. 200 mm. Note: Frame in the main beam area is 200 mm higher than the wheel recess. A detailed technical review is still required in case of an order. Pedpfji Ri Hrox Am Togp Wheel recess cover retractable from the low-bed with hardwood inserts, on the rear slope with hardwood inserts. Electric winch, 24 Volt, pulling force 5500 kg, mounted in the slope of the gooseneck, does not reach into the loading area, operation with wireless remote control, rope length 35 m x approx. 10 mm, with roller rope guide and detachable guide roller on the rear slope. Axles + Suspension SAF or BPW drum brake axles at our discretion. Air suspension with lift and lower valve + auto-reset function. Wheels and Tires 205 / 65 R 17.5 tires with 129/127K (132/132G) marking for 8 tons tire load capacity at max. 90 km/h. At the manufacturer's choice. Steel rims in twin arrangement, factory silver. Braking System 2-line pneumatic braking system. Spring-loaded parking brake. 2 non-interchangeable coupling heads at the front, without connecting line. EBS manufacturer Haldex, electronic braking system with EBS socket at the front, without connecting cable (brake calculation sent to the customer for approval. 07/15/2021). Attention: The trailer may only be pulled by towing vehicles which ensure the effectiveness of the ABS! Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab, truck must be prepared accordingly, no truck installed (no calibrated scale). Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides. 2 white position lights at the front. 2 white/red marker lights at the rear. 2 x 7-pole and 1 x 15-pole non-interchangeable sockets at the front, without connecting cable. Floor Gooseneck with steel / checkered plate covering. 30 mm sieve floor, in the low-bed between the longitudinal beams in the middle. In the wheel track area covered with toothed grating, in the wheel recesses with steel / checkered plate covering. Ramps Pair of aluminum ramps 3,200 mm long, load capacity per pair 12,000 kg. Pair of steel ramps for entry into the low-bed. Pair of steel ramps for driving onto the gooseneck. Side boards Approval / Signs Country of registration: Germany With DEKRA approval and certificate (according to §13 EC - FGV). Prepared for single-row license plate holder. Contour marking with reflective strips according to ECE R 048, yellow on the

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 6,750 kg, maximum load weight: 32,250 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 9,950 mm, loading space width: 2,480 mm, loading space height: 2,150 mm, loading space volume: 50 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 3,670 mm, suspension: air, tire size: 385/65 R 22,5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. More information Chassis, Saddle, Tipper Fine-grained steel welded construction, in basic lightweight design, saddle plate with interchangeable 2 kingpin Curved front end, patented 24 ton, 2-speed support winch, single-sided operation, with straight lower part, without thrust compensation Wheel chocks with holder Underrun protection, foldable Half-shell fenders Integrated fender holder, surface designed to repel stones Tarp rod with holder Towing hook at the rear Axles + Suspension BPW disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle, automatic lift axle, including forced lowering and start-up assistance Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With raising and lowering valve Vehicle - driving stability system Wheels and tires Podpfx Amei Rizfj Tsgp 385/65 R22.5 Steel rims, factory silver "TPMS" tire pressure monitoring system according to ECE R 141, display via display in the towing vehicle, via EBS, without truck installation (this must be available in the truck. Only on standard tires). Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides Yellow LED lighting on the sides, linked to the turn signal ("flashing side lights") 2 x 7-pole fail-safe sockets at the front, without connecting cable Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK screw-on fitting, fixed part, NW 48 mm (without hose connection) Operation via truck auxiliary drive Body Steel side body made of highly wear-resistant HB 400 steel, sloping front wall with externally mounted hydraulic cylinder mount. Shovel and broom holder on the outside of the front wall. Internal access ladder on the front wall. Side walls continuously 3 mm thick, floor continuously 3 mm thick Membrane - rear wall Internal width at the bottom approx. 1440 mm Aluminum rear wall, pendulum-mounted with "double-hinge hinge" and with 2-wing door, split 1/2 to 1/2, at the top with pivoting boom, each with a grain slide per door. Standing platform with access ladder, connection plate for air/electricity and brake with large space for optimal operation. Roller cover on one side for placement on the right side, with central locking on the left side Country of approval/signs Germany Type approval according to EC 2007/46 Body strength according to EN 12642 24/7 service hotline Prepared for license plate holder, single-line Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paint Frame: DB 7350 Novagrau "10-year warranty against rust-through" Body: RAL, single color, according to customer's choice Roller cover: RAL 7035 light gray

Condition: used, maximum load weight: 32,344 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2018, next inspection (TÜV): 06/2027, loading space height: 2,700 mm, Equipment: ABS, Due to the large number of phishing and spam emails, we can only process email inquiries if you provide a valid phone number! Unfortunately, we cannot process email inquiries without a phone number. We ask for your understanding. Pgjdjzgq Iiepfx Am Tjp For telephone inquiries and WhatsApp, please contact us. * 2 units available * German-made semi-trailer * First owner * LASI DIN EN 12642 Code XL + VDI 2700 for beverages * Lift axle * Disc brakes * Internal height at the front: 2,700 mm * Internal height at the rear: 2,790 mm * Edscha convertible top * Sliding tarpaulin, left and right * Air suspension with lifting/lowering system * Unladen weight: approx. 6,656 kg * Tires: 385/65 R 22.5 * Tread depth: 60-90% Subject to errors and prior sale.

Condition: used, axle configuration: 2 axles, loading space length: 62,000 mm, loading space width: 24,900 mm, loading space height: 3,800 mm, Year of construction: 2020, Equipment: ABS, = Additional Options and Accessories = - Air suspension, rear - Air suspension, front = Notes = For inquiries regarding the vehicle, please contact Mr. Seidel (at the following telephone number). Fliegl TPS 119 flatbed trailer Air suspension, 40 mm drawbar coupling, Duomatic, GFA axles, Knorr ABS, spring brake, loading ramps, permissible total weight: 11,900 kg, unladen weight: 3,250 kg, payload: 8,650 kg, cargo area dimensions: L 6,200 mm W 2,490 mm H 380 mm, tire tread: 1st axle 10 mm, 2nd axle 10 mm Upon request, we will provide you with a leasing or financing offer. Mr. Seidel (tel. ) will be happy to assist you. Further information can be found on our website. ... Errors, changes and prior sale reserved!!! - = Further Information = Pedpfx Amjy Ada Te Togp Unladen weight: 3,250 kg Payload: 8,650 kg GVW: 11,900 kg Last inspection: 2026-07 Please contact Tobias Ebert for further information.

Condition: used, maximum load weight: 15,300 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 01/2018, next inspection (TÜV): 02/2027, Year of construction: 2018, Equipment: ABS, * Fliegl ZWP 18 BDF trailer * ??Previously owned by a driving school?? * First registration: 01-2018 * Next TÜV inspection: 02-2027 * ??Minimal rust?? * SAF axles * ABS / EBS * Disc brakes * Air suspension * Tires: 385 / 65 R 22.5 * Tire tread: approximately 90% * Unladen weight: 2,700 kg * More pictures and videos available via WhatsApp Pgjdpfozbpxqox Am Tep * Information provided without guarantee and subject to prior sale.

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT21201012268, empty load weight: 3,240 kg, maximum load weight: 8,560 kg, overall weight: 11,800 kg, axle configuration: 2 axles, first registration: 05/2022, loading space length: 5,000 mm, loading space width: 2,420 mm, total length: 6,900 mm, total width: 2,550 mm, total height: 950 mm, suspension: steel, tire size: 235/75 R17,5", color: green, The images are archive images. The vehicle may be in use! Steel welded construction, continuous tipping shaft at the rear with 80 mm ball bearing, front gear support, foldable rear support, chocks with holder, steel underride protection, splash guards at the rear over the entire width (not in conjunction with forklift mount), quarter panel fenders, spare wheel, same brand as standard tires, steel rim, loose, plastic toolbox, with insert, w=620/h=360/d=440 mm, lockable with a padlock. (Lock not included) Note: The side board touches the storage box when folded down, lockable storage space for loading ramps below the loading area, pair of aluminum ramps 3,000 mm long, 360 mm wide, load capacity per pair 8,000 kg, (mounting rail for ramps at the rear) Drawbar with tested 40 mm towing eye, drawbar height-adjustable via spindle, max. adjustment range 300 mm BPW drum brake axles, axle/suspension laser-aligned to reduce tire wear and fuel consumption, parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (rocker compensation) 2-line compressed air braking system, color-coded line routing for easy servicing, hand-operated parking brake, integral air tank, ABS and ALB, with ABS connector at the front, with connection cable. Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS, Duomatic connection at the front, with connection line to the truck. 24 Volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red side marker lights at the rear, 1 x 15-pin connector at the front, with connection cable Three-way tipper, hydraulic multi-piston press with stroke limitation and safety cable, low-pressure cylinder up to max. 170 bar, without throttle. If required, this can be retrofitted on the truck. Hydraulic connection with SVK connector NW 10/3, incl. connection hose, operated hydraulically via truck auxiliary drive Stable tipping platform with 4 mm steel sheet floor, steel side board construction, continuous side walls, foldable and pivotally mounted with central locking at the bottom. Corner posts at the rear can be plugged in. Rear wall foldable and pivotally mounted, with central locking at the bottom, platform length approx. 5,000 mm, side walls with 6 hinges at the bottom. Side board retraction springs (not possible with split side walls), platform width 2420 mm, pair of lashing eyes in the floor, each 5 tons. Operating instructions: The specified total weight is technically possible, but depending on the load, the total weight may not be reached while complying with the permissible axle/support and drawbar loads. (Poor driving and tracking behavior possible due to incorrect load distribution). Country of registration: Germany, with Dekra approval and certificate (according to §13 EG - FGV), 24/7 service hotline, prepared for single-row license plate holder, contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear. Pgedsk E Tdaspfx Am Tsp The images are archive images. The vehicle may be in use!

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,600 kg, maximum load weight: 13,400 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,370 mm, loading space height: 900 mm, total length: 7,200 mm, total width: 2,550 mm, total height: 2,350 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Podpfszcyl Rsx Am Tjgp Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications. *Chassis – Tandem Three-Way Tipping Trailer Welded steel chassis construction Continuous rear tipping shaft with 100 mm spherical tipping bearing Two-speed landing gear at the front Foldable rear support legs Wheel chocks with holder Steel underrun protection Quarter mudguards in front of and behind each axle Anti-spray mud flaps behind each axle Lockable storage compartment for aluminium loading ramps beneath the platform 1 pair of aluminium loading ramps, approx. 3,600 mm long and 400 mm wide, load capacity 8,000 kg per pair Plastic toolbox with shelf insert, dimensions: 620 x 360 x 440 mm (W x H x D), lockable with padlock *Drawbar Drawbar with certified towing eye *Axles & Suspension BPW drum brake axles Air suspension with raise-and-lower valve *Wheels & Tyres 385/55 R 22.5 tyres, manufacturer's choice Steel rims, factory silver finish *Braking System Dual-line compressed air braking system Spring-loaded parking brake Two non-interchangeable coupling heads at the front with connecting lines to the towing vehicle EBS (Electronic Braking System) with front EBS connector and connecting cable *Electrical System 24 V electrical system Multi-chamber rear lights Yellow LED side marker lights 2 white front position lights 2 white/red rear outline marker lights 2 x 7-pin non-interchangeable front plugs with connecting cable *Hydraulic System Three-way tipping mechanism Hydraulic multi-stage tipping cylinder with stroke limiter and safety cable Hydraulic connection with SVK coupling NW 10/3, including connecting hose Hydraulic operation via truck PTO (power take-off) *Tipping Body 4 mm HB 400 steel floor Rear spherical tipping bearing, 100 mm diameter Steel side walls, drop-down and pendulum-mounted, with central locking at the bottom Front wall and side walls approx. 800 mm high Steel rear wall approx. 600 mm high, designed as a combination pendulum tailgate Side wall return springs 4 pairs of external lashing rings in the floor, each rated at 3 t 2 pairs of recessed floor lashing rings, each rated at 5 t *Registration & Compliance Registration country: Germany DEKRA inspection and certification included 24/7 service hotline Prepared for single-line licence plate holder Reflective contour markings according to ECE R048 (white on the sides, red at the rear) Rear warning plate according to ECE 70 *Paint Finish Chassis: galvanised or painted according to customer requirements Body and side walls: painted according to customer requirements Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,220 kg, maximum load weight: 8,580 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 450 mm, total length: 6,900 mm, total width: 2,550 mm, total height: 1,550 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized to meet individual customer needs. Chassis: Central axle tilting trailer Steel welded construction, continuous tilting shaft at the rear with 80 mm ball bearing Gear-supported front support leg Foldable rear support Wheel chocks with holder Underrun protection, steel Splash guards at the rear, covering the entire width (not in conjunction with forklift mount) Quarter panel fenders 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable (lock not included) Note! The side panel touches the storage box when folded down. Lockable storage space for loading ramps below the loading area Coupling device for central axle trailer Drawbar with tested 40 mm tow hitch Drawbar height adjustable via spindle, max. adjustment range 300 mm Axles + Suspension GFA or BPW axles, at the manufacturer's choice, with tapered roller bearing and S-cam brake "Axle/chassis laser-aligned" - reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load equalization (linkage equalization) Wheels and Tires 235 / 75 R 17.5", manufacturer's choice Steel rims, factory silver Braking System 2-line compressed air braking system Color-coded line routing for easy servicing Handwheel-operated parking brake 24 Volt ABS and ALB, with ABS connector at the front, with connection cable Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! 2 fail-safe coupling heads at the front, with connection lines to the towing vehicle Electrical System 12 to 24 Volts, multi-chamber lights in LED, yellow LED side lighting, license plate lighting in LED 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole fail-safe connectors at the front, with connection cable Additional LED work lights at the rear, switched via reversing light Hydraulics Three-way tipper, hydraulic multi-piston cylinder with stroke limitation and safety cable Podpfx Amezcv Sto Tjgp Low-pressure cylinder up to max. 170 bar, without throttle. If required, this must be retrofitted on the truck (truck with max. hydraulic flow rate of 55 l/min) Hydraulic connection with SVK connector NW 10/3, including connection hose Operation hydraulically via truck auxiliary drive Tipping Platforms Stable tipping platform with 4 mm steel sheet base, side panel construction in steel, side walls continuous, foldable and pivotally mounted with central locking at the bottom. Rear corner posts pluggable. Rear wall foldable and pivotally mounted, with central locking at the bottom. Platform length approx. 5,000 mm, side walls with 6 hinges at the bottom. Side panel retraction springs Platform width 2420 mm 3 pairs of lashing eyes in the floor, each 5 tons Paint Finish Frame: Hot-dip galvanized including passivation "15-year guarantee against rust through" Side panels/platform: galvanized or painted according to customer requirements Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized to meet individual customer needs.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,950 kg, maximum load weight: 23,050 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 7,500 mm, loading space width: 2,520 mm, total length: 9,350 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis – Central axle trailer design Fine-grained steel welded construction Gear-supported front leg Hydraulic rear supports Wheel chocks with holder Aluminum side impact protection Without under-run protection Mud flaps at the rear, covering the entire width Mud flaps in front of each axle and anti-splash mud flaps behind each axle Plastic tool box, with insert, w=620/h=360/d=440 mm, lockable with a padlock Extendable widening elements to 3,000 mm Storage compartment for wooden planks in the center + wooden planks 70 mm for widening to 3,000 mm Tie-down points for low-bed trailers Recessed ring-type tie-down points in the outer frame, each rated at 5 tons (can be converted to stake pockets) Tie-down eyes at the top and on the sides in the outer frame, each rated at 10 tons Towing device – Central axle trailer Drawbar with a tested 50 mm tow hitch Axles + Suspension Drum brake axles "Axles/chassis laser-aligned" – reduces tire wear and fuel consumption Last axle with trailing arm steering, with automatic reversing lock controlled via the reversing light, and an additional locking function on the vehicle via a manual button. Air suspension 1st axle – automatic lift axle, additionally manually lowerable, operable with a button on the vehicle Axle lift below the recommended driving height, therefore no guarantee for tire damage Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connection lines to the towing vehicle EBS, electronic braking system with EBS connector at the front, with connection cable Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! With lifting and lowering valve Vehicle height in conjunction with the lift axle; when the lift axle is raised, the loading or overall height increases by 50 mm Vehicle – Driving stability system Trailer Info Center for displaying vehicle data such as axle loads, mileage, and diagnostic/system messages Axle load detection via EBS-CAN bus signal for display on the display in the cab Wheels and tires 235/75 R17.5, manufacturer's choice Steel rims, factory silver Electrical system 24 volts, multi-chamber lights in LED with resistor, yellow LED lighting on the sides, license plate lighting in LED 2 white position lights at the front in LED 2 white/red marker lights at the rear in LED 2 x 7-pin fail-safe plugs at the front, with connection cable Additional LED work light at the rear LED rotating beacon with mount Warning signs, LED illuminated and extendable to 3,000 mm Floor Subsequently with 70 mm softwood flooring, steel/diamond plate covering in the wheel arch area Rear slope with 70 mm softwood flooring Low-bed platform including rear slope 7,500 mm Ramps Podpszcv D Nsfx Am Tsgp Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Covered with wood Hydraulically operated via towing vehicle’s auxiliary drive with throttle, operation on the left side in the front Hydraulic lateral adjustment of the ramps, individually controllable Hydraulic connection with quick-release coupling NW 10/3, including connection hose Customized transport solution

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,995 kg, maximum load weight: 16,005 kg, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 6,500 mm, loading space width: 2,520 mm, total length: 8,450 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Custom-Made Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis: Center-Axle Trailer Fine-grained steel welded construction 2-speed gear-supported landing leg at the front Folding rear support 2 jockey legs with holder Aluminum side impact protection Splash flaps at the rear, spanning the entire width Quarter panel fenders in front of and behind each axle with anti-spray splash flaps according to EC regulations 1 aluminum storage box with stainless steel flap Container locking mechanism, 1 pair of recessed locking recesses in the floor for 1 x 20 ft container, 1 pair of container locking adapters Extendable widening sections to 3,000 mm Storage compartment for wooden planks in the center + wooden planks 70 mm for widening to 3000 mm Tie-down points, low-bed trailer 1 pair of tie-down brackets additionally at the front in the front cross member, 10 tons each 5 pairs of ring tie-down points recessed in the outer frame, 5 tons each (can be converted to stake pockets) 7 pairs of tie-down cleats recessed on top and on the side in the outer frame, 10 tons each Coupling system, center-axle trailer Drawbar with tested 50 mm tow hitch Axles + Suspension Drum brake axles, according to the manufacturer's choice "Axle/chassis laser aligned" reduces tire wear and fuel consumption Axle distance 1810 mm Air suspension Braking system 2-line compressed air braking system Color-coded line routing for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connection lines to the towing vehicle Parking sockets for ABS/EBS and air connection on the drawbar or drawbar 24 Volt EBS, electronic braking system with EBS connector at the front with lift and lower valve Vehicle - driving stability system Axle load recognition via EBS-CAN bus signal, for display on the display in the cab "TPMS" Tire Pressure Monitoring System according to ECE R 141, display on the display in the towing vehicle, via EBS Wheels and Tires 235/75 R17.5, manufacturer's choice Protective caps for wheel studs Electrical System 24 Volt, multi-chamber lights in LED, yellow LED lighting on the side, license plate lighting in LED Yellow LED lighting on the side, coupled with the turn signal "Flashing side marker lights" Premium LED side marker lights, with "20 LED diodes per light" 2 white position lights at the front in LED 2 white/red outline lights at the rear in LED 2 x 7-pole fail-safe plugs at the front, with connection cable Parking sockets for electrical system on the drawbar LED work lights on both sides 2 additional LED work lights at the rear 1 LED rotating beacon with holder, switched via sidelights 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor thereafter with approx. 70 mm soft wood flooring, in the wheel arch area steel/diamond plate flooring Rear inclination with "Mega Grip surface" made of interlocking grating Low-bed area including rear inclination 6,500 mm Front panel / corner posts Aluminum profile, approx. 400 mm high, plug-in Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally movable Ramp surface with "Mega Grip" made of interlocking grating Hydraulically operated via towing vehicle auxiliary drive with throttle, operation on the left side Podozcvt Ropfx Am Togp Hydraulic side displacement of the ramps, individually controllable Hydraulic connection with quick-release cou

Condition: used, maximum load weight: 2,300 kg, overall weight: 3,000 kg, axle configuration: 2 axles, first registration: 06/2015, Ref. No.: B - 06 On behalf of customer Pgedpfx Asxvf U Njm Top Fliegl * TTS 30-30 * Low-bed trailer * Ramps * 2-axle * Permissible total weight 3000kg * Very good condition, little used Trade-in possible Financing starting at 3.99% Errors and prior sale excepted! The information in this advertisement is non-binding descriptions and does not constitute guaranteed characteristics. The seller assumes no liability for typographical or data transmission errors. Stated features should be checked separately. All details in the ads are non-binding! Nationwide delivery within Germany available upon request. Opening hours: Monday to Thursday from 9:00 am to 5:00 pm Friday from 9:00 am to 2:00 pm and by appointment!

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,135 kg, maximum load weight: 8,665 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 6,200 mm, loading space width: 2,480 mm, total length: 8,350 mm, total width: 2,550 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Fine-grained steel welded construction Outer frame slightly inclined with "Load-Lock profile" for attaching lashing straps Gearbox support at the front Foldable rear support 2 wedge blocks with holder Underrun protection, steel, galvanized Podpfx Amji Ri H Dj Tegp Splash guards at the rear, covering the entire width Partial wheel arches according to EC standards with anti-spray splash guards according to EC standards 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Storage compartment for inserting bars, open, below the loading area 4 lashing/rail strips inserted crosswise in the floor, across the entire width up to the outer frame (max. usable internal width between the outer rail supports approx. 2170 mm), approx. 100 mm high. With 20 mm round steel strips at the top and bottom, spacing from top to bottom approx. 60 mm (of the round steel). At the bottom with an angle plate as a finish, open halfway down. For lashing and inserting 80 x 80 mm rails. 4 pairs of rail pockets inserted in the outer frame, internal dimension 83 x 83 mm 4 rail pockets inserted centrally in the floor, with reinforcements to the main frame, internal dimension 83 x 83 mm 6 pairs of insertion rails B=80/ D=80/ L=2000 mm, hot-dip galvanized Note: Rail pockets/insertion bars are not designed for the sole securing of long materials, pipes, etc. without wrapping. Side impact protection, aluminum Coupling device for tandem trailer Drawbar with tested 40 mm towing eye Drawbar mechanically adjustable in length by 4 x 500 mm from 1800 - 3800 mm, drawbar length set to 1800 mm Axles + Suspension Axles according to the manufacturer's choice, with tapered roller bearings and S-cam brakes "Axle/chassis laser-aligned" Reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (lever compensation) Wheels and tires 235 / 75 R 17.5", according to the manufacturer's choice Steel rims, factory silver Braking system 2-line compressed air brake system Spring-loaded parking brake Integral air tank 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle, ABS and ALB, with ABS plug at the front, with connection cable Note: The trailer may only be pulled by towing vehicles which guarantee the effectiveness of the ABS! Electrical system 24 Volt, multi-chamber lights in LED, yellow LED lighting on the sides, license plate lighting in LED (Note! with certain towing vehicles, false diagnoses may occur, even if the function is given) 2 white position lights at the front in LED 2 white/red marker lights at the rear in LED 2 x 7-pole fail-safe plugs at the front, with connection cable Floor Sieve print plates approx. 30 mm thick, for high point load capacity Note: Floor deformation due to weather influences possible! Platform length approx. 6,200 mm Operating instructions Special permit required if the overall train length exceeds 18,750 mm. Observe country-specific registration regulations. Approval / Signs Registration country: Germany with DEKRA inspection and certificate Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Painting Frame hot-dip galvanized incl. passivation "15-year warranty against rust-through" Customized transport solution

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 2,900 kg, maximum load weight: 8,900 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 6,200 mm, loading space width: 2,480 mm, total length: 8,000 mm, total width: 2,550 mm, total height: 3,000 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis: Center-axle trailer Fine-grained steel welded construction Outer frame slightly angled, new design with "Load-Lock profile" for tie-down straps 3 pairs of lashing eyes outside in the floor, each 5 tons 1 at the front in the corners, 1 in front of and 1 in the rear incline at the back 6 pairs of lashing eyes outside in the floor/outer frame, each 5 tons Gearbox support leg at the front Rear support, foldable 2 wheel chocks with holder Aluminum side impact protection Steel underrun protection, galvanized Splash guards at the rear covering the entire width (not in combination with forklift mount) Quarter panel fenders 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Coupling device: Center-axle trailer Drawbar with tested 40 mm drawbar eye Drawbar height-adjustable via spindle, max. adjustment range 300 mm Axles + Suspension GFA or BPW axles, at the manufacturer's choice, with tapered roller bearing and S-cam brake "Axle/chassis laser-aligned" - reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (lever compensation) Braking System 2-line compressed air brake system Color-coded line routing for easy servicing Hand-spindle parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle 24 volt ABS and ALB, with ABS connector at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Wheels and Tires 235/75 R17.5, manufacturer's choice Steel rims, factory silver Electrical System 24 volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front, in LED 2 white/red marker lights at the rear 2 x 7-pole fail-safe plugs at the front, with connecting cable Floor Steel/diamond plate floor for high point load capacity Note: Slight floor waviness due to welding distortion is possible! Platform length approx. 6,200 mm Rear incline to approx. 900 mm Front wall / corner posts at the front 25 mm aluminum hollow profile, 400 mm high Side walls 25 mm aluminum hollow profile, 400 mm high, foldable and removable Rear wall / corner posts at the rear 1 pair of steel uprights attached to the frame, with brackets for locking the access ramps, access width approx. 2,430 mm Access Ramps Steel ramps 2,300 mm long, 510 mm wide, laterally movable With handrail on the ramps Pedpfxjzcqpae Am Tjgp Covered with wood (tip area with steel/diamond plate) With gas spring for one-person operation Operating Instructions The stated total weight is technically possible; depending on the cargo, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor driving and following behavior possible due to incorrect load distribution) Country of Registration / Signs Germany With DEKRA inspection and certificate (according to §13 EG - FGV) 24/7 service hotline Prepared for single-row license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paintwork Frame DB 7350 Novagrau "10-year warranty against rusting" Front wall Aluminum Side wall Aluminum, anodized Access ramps Hot-dip galvanized Customized Transport Solution