Used Frame Dowel Drilling Machine for sale (70,783)

Year of construction: 2002, condition: ready for operation (used), Travel X/Y/Z: 3000mm/2300mm/1600mm, travel W: 700mm, max. table-to-spindle distance: 2300mm, table dimensions X/Y: 1800mm/2200mm, max. table load: 10000kg, spindle diameter: 130mm, spindle speed: 2500rpm, rapid traverse X/Y/Z: 10m/min, rapid traverse W/B: 5000mm/min/500mm/min, feed X/Y/Z: 4m/min, tool holder: BT50, tool positions: 38, positioning accuracy X/Y/Z: +/-0.008mm, positioning accuracy W: +/-0.012mm, repeatability X/Y/Z: +/-0.004mm, repeatability W: +/-0.008mm. Machine dimensions X/Y/Z: approx. 7050mm/7200mm/4800mm, weight: approx. 37000kg, control: TOSNUC-888. Documentation available. An on-site inspection is possible. The machine is located in China. Prsdsxf Ikrjpfx Alcoa

Year of construction: 2007, condition: ready for operation (used), A CNC profile drilling machine Voortman with a movable drilling cabin is available. Working height range: 30mm-1050mm, positioning speed: 40m/min, table width: 300mm, max. working width: 1800mm, support depth: 1500mm, tool stations: 5, max. travel speed: 40m/min, tool holder: SK40, drilling diameter range: 5mm-40mm, thread cutting range: M6-M30, working length: 16200mm. Documentation available. On-site inspection possible. Podpfx Aexp Rb Islcora

Year of construction: 1994, condition: ready for operation (used), A CNC universal tool milling and drilling machine Hermle is available. Travel X/Y/Z: 700mm/550mm/500mm, quill stroke: 95mm, spindle power: 12kW, spindle speed: 4200rpm, spindle swivel: +/-75°, tool holder: SK40, clamping force: 12kN, feed rate: 10m/min, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 4400mm/4250mm/2300mm, weight: approx. 4500kg, control: Heidenhain TNC 425. Documentation available. An on-site inspection is possible. Prodpfx Alsw D Evlscea

Year of construction: 1972, condition: ready for operation (used), Spindle-to-table distance min./max.: 81mm/481mm, counter support spindle center distance: 195mm, spindle head swivel: 360°, milling spindle diameter: 70mm, spindle adjustment: 100mm, headstock adjustment: 300mm, table dimensions X/Y: 480mm/820mm, travel X/Y/Z: 500mm/200mm/400mm, max. workpiece length: 400mm, spindle speed: 1600rpm, feed X/Y: 500mm/min, feed Z: 250mm/min, spindle head swivel: +/-30°, machine dimensions X/Y/Z: approx. 1600mm/2550mm/1700mm, weight: approx. 2300kg. The machine was electrically tested at the end of 2025 and a defect of the emergency stop switch was discovered. Documentation available. On-site inspection is possible. Podpfx Asx S Rcmolcjra

Year of construction: 2017, condition: ready for operation (used), Offered is an OptiMill MF 4V milling machine, almost new, 100h. Year of construction 2017, travel ranges X/Y/Z: 800mm/320mm/400mm, stepless spindle speed 9-6750rpm in 8 speed ranges, with electronic speed control, quill stroke: 127mm, 3-axis digital display DPA21, right/left rotation reversing switch, drilling depth stop, cross table X/Y 1244mm/230mm T-slot 16mm, chuck guard, coolant system, manual central lubrication, universal compressed-air tool clamping system ISO 40, stepless table feeds in X/Y, weight approx. 1200kg. Viewing is possible by arrangement. Pjdjxyk Ucepfx Alcera

Year of construction: 1980, condition: ready for operation (used), A Gebrüder Irle CNC large-format deep-hole drilling machine is available. Drilling capacity steel: 40mm, max. drilling depth: 1600mm, drill spindle adjustment: 350mm, vertical drilling unit adjustment: 700mm, power: 30kW, speed: 2940rpm, field range constant power: 1-3, armature range constant torque: 1-35, max. drill spindle torque: 1500Nm, rated speed: 163rpm, spindle flange diameter: 200mm, quill diameter: 2000mm. Feed: 500mm/min, rapid traverse: 1200mm/min, max. feed force: approx. 34.3kN, display: 0.005mm, vertical adjustment travel: 700mm, longitudinal adjustment travel: 13000mm, transverse adjustment travel: 650mm, swivel: 85°. Clamping plate dimensions X/Y/Z: 12500mm/1000mm, guide bed dimensions X/Y: 3350mm/455mm, controls: Heidenhain TNC 310. Documentation available. An on-site inspection is possible. Pjdpfx Aloy Rtfzecsra

Year of construction: 1998, condition: ready for operation (used), A CNC PCB drilling and milling machine for PCB manufacturing is available. Stations: 2, Speed: 125000rpm, Collet: 3.175mm, Tool diameter range: 0.1mm-6.35mm, Working dimensions X/Y: 630mm/765mm, Positioning accuracy: 5µm, Repeatability: 4µm, Rapid traverse: 25m/min. Documentation available. An on-site inspection is possible. Pjdpfxjzhw Ths Alcora

Year of construction: 1970, condition: ready for operation (used), A horizontal boring and milling machine Scharmann is available. Spindle sleeve diameter: 120mm, travel X/Y/W: 1600mm/1600mm/600mm, speed: 1000rpm, table dimensions X/Y/Z: approx. 1200mm/1400mm, max. table load: 6000kg, column diameter: 220mm, table rotation: 360°, rapid traverse: 380mm/min, feed: 2400mm/min. Machine dimensions X/Y/Z: approx. 4500mm/2600mm/3000mm, weight: approx. 17000kg. Dokumentation vorhanden. An on-site inspection is possible. Podpsxyk Tlefx Alcsra

Year of construction: 2018, condition: ready for operation (used), A CNC radial drilling machine overhauled in 2018 is offered. Working range X/Y: 1050mm/1800mm, drilling capacity steel: 40mm, drilling capacity cast iron: 50mm, thread cutting: M36-M45, tool holder: SK40, speed range: 15rpm-2800rpm, quill stroke Z: 200mm, column stroke W: 410mm, table clamping surface X/Y: 1800mm/600mm, feed speed: 5mm/min-2000mm/min, rapid traverse X/Y: 7.5m/min, control: CNC control. Equipped with 360° swivel device, motorized tool clamping, three-jaw chuck for round parts, modernized LCD monitor, extensive tooling package. Weight: approx. 2900kg, overall dimensions X/Y/Z: approx. 2600mm/1900mm/2950mm. Inspection possible by arrangement. Predpfxjy Tn Nte Alcea

Condition: ready for operation (used), Drilling diameter: 3-25mm, drilling depth: 1000mm, connected load: 36kW, control: EST, 99 drilling memory positions per program, grinding and coordinate programming, plain text programming via input mask. Accessories: paper band filter, coolant cooling system, 4-door control cabinet, high-pressure pump up to 150bar, oil tank, 1 steady rest for smaller diameters at large drilling depths, direction-adjustable holder for drill bushing holders, various drill bushing holders, long clamping table for 0-height, tailstock stop and base plate for machine vice freely movable on the additional table, matching precision machine vice optionally available. Speed, high pressure, Z-axis (feed), X/Y-axes, and W-axis (approach slide) programmable via control. CPU and card rack defective (fan fault), machine therefore not operational, drives and guideways were fully functional until last operation. An on-site inspection is possible. Podpjylbrqefx Alcjra

Year of construction: 1999, condition: ready for operation (used), Offered is a CNC-controlled drilling and insertion machine. Workpiece size max.: 1350mm x 600mm x 25mm, operating pressure: 6-7bar, extraction speed: 32m/s, working height: 1000mm, control system: Ferrocontrol. Equipped with two-station machine for alternating loading, feed system for workpieces, vibratory feeder with sound-insulating hood for hinges, drilling and insertion unit, control cabinet, extraction collector. Weight: approx. 6000kg, overall dimensions X/Y/Z: approx. 6240mm/4500mm/2200mm. Inspection possible by arrangement. Podpfxoy Ull Uj Alcera

Year of construction: 1981, condition: ready for operation (used), Travel X/Y/Z/W: 1000mm/900mm/800mm/710mm, speed: 1400rpm, spindle diameter: 90mm, table dimensions: 1250mm/1250mm, max. table load: 3000kg, motor power: 7.5kW. X/Y dimensions: approx. 5500mm/7500mm, weight: approx. 11000kg, control: Newall DP700. Documentation available. Predpfxot Hkh Ao Alcsa

Condition: ready for operation (used), Year of construction: 2000, Controls: HEIDENHAIN TNC 426, connected load: 7.7kW, including Rotator 3R WorkPal, with documentation, without spare parts. Predpfx Aex Tpytslcsa

Condition: good (used), Year of construction: 1972, Drilling capacity in steel 70 mm Drilling capacity in cast iron 80 mm Spindle holder MK 5 Spindle projection 400 mm Spindle stroke 240 mm Column diameter 250 mm Speed range, infinitely variable 45 - 1325 rpm 5 feeds 0.1, 0.14, 0.2, 0.28, 0.4 mm/rev Table size 880 x 660 mm Motor power 3 kW Dimensions L x W x H 880 x 1200 x 2500 mm Machine weight 1400 kg Accessories / Special features: - Infinitely variable speed adjustment via PIV gearbox and reduction gear - Large clamping table 880 x 660 mm - Feed via cross lever - Large drilling depth adjustment with 240 mm fixed stop - Swivel table - Emergency stop switch - Coolant system Prodjt Uzk Ropfx Alcea Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 1987, total width: 800 mm, total length: 1,200 mm, total height: 2,600 mm, Colour: Green Empty weight: 700 kg - Year: 1987 - Documentation available: No - CE certificate present: No - Serial number: 14441 - Drive system: Conventional - Drive system: Gear drive - Power [kW]: 2.2 - Table type: Fixed table - Table length [mm]: 500 Prsdpfx Alszkq Auscsa - Table width [mm]: 500 - Drilling depth [mm]: 250 - Drilling capacity [mm]: 32 - Reach [mm]: 320 - Tool holder: MK4 - Main spindle power [kW]: 1.5 - Min. spindle speed [rpm]: 85 - Max. spindle speed [rpm]: 1500 - Options: Drill unit feed - Transport dimensions: 1200mm x 800mm x 2600mm (l x w x h) - Transport weight [kg]: 700kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 1988, taper MK 5 spindle diameter 60 mm Podpfx Alezmixmocera feed ja m/min weight of the machine ca. 1,1 t

Condition: new, Year of construction: 2026, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, actuation type: electric, rotational speed (max.): 3,100 rpm, rotational speed (min.): 700 rpm, total width: 1,487 mm, total length: 4,440 mm, total height: 2,793 mm, throat depth: 1,490 mm, overall weight: 1,900 kg, Equipment: CE marking, documentation/manual, NEW | YEAR 2026 | CE CERTIFIED | MADE IN POLAND | EXW €38,000 + VAT WHY THE PRIAM The Priam is a vertical, electronically controlled glass drilling machine that does most of the work for the operator. The entire feed is electronically controlled — drilling is smooth and repeatable. The operator's role is minimal. After mounting the hole saws, they press the "Calibration" button — the machine measures the length of both drills (front and rear) and their diameter, then automatically assigns the correct spindle speed. After every drill change, the machine will not start drilling until calibration is done — setup errors are impossible. The hole position on the vertical axis is entered on the monitor and the support bar travels there automatically (up to 1,060 mm below the spindle axis); horizontally, the glass is positioned against 6 stops. The machine does the rest: the pneumatic clamp measures the glass thickness, the rear spindle pre-drills to a depth calculated by the controller, and the front spindle completes the hole from the other side — chip-free, clean edges at the first attempt. Optional: double-sided chamfering (hole saw with chamfering ring), tapered holes, and pulse drilling mode for laminated (VSG) glass. BUILT FOR SERIAL PRODUCTION Up to 20 holes on the vertical axis can be programmed — the operator enters the dimensions once and the machine drills them automatically. In serial production (shower enclosures, balustrades) the following panes are drilled without re-entering positions. Drilling at position 0 on the support bar allows holes on the glass edge (half-moon cut-outs). Performance: a Ø 75 mm hole in 4 mm glass in approx. 25–30 s (feed in glass approx. 1 mm/s, speed set by the operator). Recommended: thin-wall, self-sharpening hole saws (e.g. Champion, L=75 mm). TECHNICAL DATA Drilling diameter range: Ø 5–80 mm (both drills same diameter) Glass thickness: 2–20 mm Max. pane size: 2,000 × 4,000 mm, up to 200 kg Support bar travel: up to 1,060 mm below spindle axis Holes on the glass edge (half-moon): yes, position 0 Drilling program: up to 20 holes on the vertical axis Prodpfxsh Ek H Se Alcoa Spindle speed: adjustable 700–2,800 RPM, assigned automatically after calibration Feed: automatic, electronically controlled Cooling: closed water circuit, approx. 30 l Compressed air: 6 bar (pneumatic clamping) Power supply: 400 V / 16 A / 4 kW Machine dimensions (L × W × H): 4,440 × 1,487 × 2,793 mm Weight: 1,900 kg Scope of delivery: CE marking, documentation, operating manual MANUFACTURER, SERVICE, TERMS EXPOGLASS is a Polish manufacturer of glass processing machinery — built at our own factory in Nysa (in-house welding shop and powder coating). Service with online support; spare and wear parts available from stock. Delivery and commissioning across the EU, operator training on site. Delivery time: approx. 8 weeks. Warranty: 12 months. Visit our factory and see the Priam drill your own glass samples before you buy — video of the machine in operation in this listing. Glasstec 2026, Düsseldorf, 20–23 October, Hall 12, Stand 12A72.

Condition: excellent (used), Catalog number: 8071 Predpfxezuk Aie Alcoa TECHNICAL DATA - Number of spindles: 21 pcs - Distance between extreme spindles: 640 mm - Spindle spacing: 32 mm - Pneumatic clamps: 2 pcs - Table surface dimensions: 900x350 mm - Height to table surface: 900 mm - Stroke of feed cylinder (drilling depth adjustment): 50 mm - Drilling speed, pneumatically adjustable - Drilling angle, manually adjustable - Main motor: 1.5 kW - Side guides: 400 mm - Compressed air requirement: 6-8 bar - Diameter of dust extraction port: 60 mm - Dimensions (L/W/H): 1000x860x1270 mm - Weight: 267 kg ADVANTAGES – Made in Italy – 21 spindles – drill bits mounted on quick-release fittings – Drilling in vertical, horizontal, and angled positions – Unpainted – Used drill press, very good condition Net price: 6900 PLN Net price: 1643 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to significant fluctuations)

Condition: excellent (used), Year of construction: 1988, Drilling capacity in steel (diameter) 40 mm Overhang 1,250 mm Spindle mount MK 5 Drilling spindle stroke 355 mm Speed range 20 – 1200 rpm Machine weight approx. 3.0 t Prsdpfxozgdfbe Alcja

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 7519.51 € Prjdjy Hf Ruepfx Alcja 145.13 € 23 mm MK 3 260 mm 20 - 2000 U/min 1,5 kW M16x1 430 mm 715 mm 1800 mm 290 kg 115 mm 110 mm 230 - 850 mm 420 x 340 mm PLUS - CONTROL PANEL WITH FOLLOWING FUNCTIONS: - Display - Operation via function keys and rotary/push button - Drilling mode / Tapping mode - Zero point setting - Drilling depth adjustment - Infinitely variable speed adjustment - Piece counter - Spindle stop function (spindle stops automatically after drilling) Drilling capacity / normal drilling Performance 23/25 (in E335/ST60) Main switch Thread cutting device Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with CEE plug 3 years warranty for single shift operation OPTIONS (PRICES ON REQUEST): Drill package 3 (vice & keyless chuck) Coolant device LED lighting with pivot arm

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 6939.26 € 133.93 € Predpoy Hf N Rjfx Alcea 20 mm MK 2 260 mm 30 - 3000 U/min 1,5 kW M12 430 mm 715 mm 1800 mm 290 kg 100 mm 110 mm 230 - 850 mm 420 x 340 mm PLUS - CONTROL PANEL WITH FOLLOWING FUNCTIONS: - Display - Operation via function keys and rotary/push button - Drilling mode / Tapping mode - Zero point setting - Drilling depth adjustment - Infinitely variable speed adjustment - Piece counter - Spindle stop function (spindle stops automatically after drilling) Drilling capacity / normal drilling Performance 20/23 (in E335/ST60) Main switch Tapping attachement Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with CEE plug 3 years warranty for single shift operation Art. - No. 223.020 R1 (20-2,000 1/min) Art. - No. 223.025 R2 (30-3,000 1/min) OPTIONS (PRICES ON REQUEST): Drill package 3 (vice & keyless chuck) Coolant device LED lighting with pivot arm

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 7401.09 € 142.84 € 20 mm MK 3 260 mm 30 - 3000 U/min 1,5 kW M12 430 mm 715 mm 1800 mm 290 kg 115 mm 110 mm 230 - 850 mm 420 x 340 mm PLUS - CONTROL PANEL WITH FOLLOWING FUNCTIONS: - Display - Operation via function keys and rotary/push button - Drilling mode / Tapping mode - Zero point setting - Drilling depth adjustment - Infinitely variable speed adjustment - Piece counter - Spindle stop function (spindle stops automatically after drilling) Drilling capacity / normal drilling Performance 20/23 (in E335/ST60) Main switch Thread cutting device Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob Prodpfx Aley Hf N Djcja EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with CEE plug 3 years warranty for single shift operation OPTIONS (PRICES ON REQUEST): Drill package 3 (vice & keyless chuck) Coolant device LED lighting with pivot arm

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 15095.86 € 289.84 € 30 mm MK 3 300 mm 0 - 4000 U/min 3 kW M30x3,5 900 mm 610 mm 1980 mm 385 kg 0,10 / 0,16 / 0,25 mm/U 125 mm 150 - 700 mm 590 x 450 mm 125 mm PLUS - CONTROL PANEL WITH FOLLOWING FUNCTIONS: - Display - Operation via function keys and rotary/push button - Drilling mode / Tapping mode - Zero point setting - Drilling depth adjustment - Infinitely variable speed adjustment - Piece counter - Spindle stop function (spindle stops automatically after drilling) Drilling capacity / normal drilling capacity 30/35 (in E335/ST60) Main switch Dispositif de taraudage Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front Prodpfx Aeynnczslcoa LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob Emergency stop button Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with CEE plug 3 years warranty for single shift operation Mechanical feed of the Z-axis incl. electromagnetic clutch for (3) feed rates Drilling cross with pushbutton (on/off) for feed rate In tapping mode: Right-left lifting via drill cross switch or optional foot switch OPTIONS: Drill package 5 (vice & keyless chuck) Coolant device LED lighting with pivot arm

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Prsdpfxeynmz As Alcoa Deutschland 5309.85 € 102.48 € 18 mm MK 2 240 mm 30 - 3000 U/min 0.75 kW M12 (steigungsabhängig) 705 mm 355 mm 1825 mm 195 kg manuell mm/U 82 mm 180 - 870 mm 340 x 280 mm 100 mm PLUS - CONTROL PANEL WITH FOLLOWING FUNCTIONS: - Display - Operation via function keys and rotary/push button - Drilling mode / Tapping mode - Zero point setting - Drilling depth adjustment - Infinitely variable speed adjustment - Piece counter - Spindle stop function (spindle stops automatically after drilling) Drilling capacity / normal drilling capacity 18/20 (in E335/ST60) Thread cutting system Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob Manual feed EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with Schuko plug 3 years warranty for single shift operation OPTIONS: Drill package 3 (vice & keyless chuck) Coolant device LED lighting with pivot arm

Condition: new, Year of construction: 2025, neu 2025 030161 prompt, Zwischenverkauf v Deutschland 7350.17 € 141.86 € 1 23 mm MK 2 260 mm 20 - 2000 U/min Podjxcg Ecjpfx Alcsra 1.5 kW M16x1 430 mm 715 mm 1800 mm 290 kg manuell mm/U 110 mm 230 - 850 mm 420 x 340 mm 100 mm PLUS - CONTROL PANEL WITH FOLLOWING FUNCTIONS: - Display - Operation via function keys and rotary/push button - Drilling mode / Tapping mode - Zero point setting - Drilling depth adjustment - Infinitely variable speed adjustment - Piece counter - Spindle stop function (spindle stops automatically after drilling) Drilling capacity / normal drilling capacity 23/25 (in E335/ST60) Manual feed Main switch Tapping attachement Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with CEE plug OPTIONS: Drill package 3 (vice & keyless chuck) Coolant device LED lighting with pivot arm