Used Geiss T7 for sale (490)

Year of construction: 2019, condition: good (used), functionality: fully functional, Die cutting, embossing and finishing machine Bledpoxzvamsfx Al Ajn Kama ProCut 76 with CPX Station still in production available immediately Sheet size, max. 760 x 600 mm Die cutting size, max. 743 x 585 mm Sheet format, min. 279 x 210 mm Cutting force max. 180 t Gripper margin die cutting 10 mm Speed* 5 500 sheets/h

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33802030369, empty load weight: 31,110 kg, maximum load weight: 34,889 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 03/2022, next inspection (TÜV): 01/2027, total length: 7,390 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: red, # Fliegl Chemical Tank Container Chassis Please note: The images shown are archive photos. The vehicle may still be in operation. ## Chassis * High-strength fine-grain steel welded chassis * Fifth wheel with replaceable 2" kingpin * Container configuration: * 1 × centrally positioned 20 ft ISO tank container * Alternatively suitable for 7.15 m / 7.45 m swap bodies * Front container locks in fixed (non-recessed) position * Extended container locking twist locks * 24-tonne, two-speed landing gear with single-side operation, straight foot design, without load compensation * Wheel chocks with holders * Side underrun protection * Aluminium rear underrun protection * EC-compliant anti-spray mud flaps * Stainless steel spill containment tray with: * 1¼" drain pipe * 1¼" shut-off valve * Drip tray included * Perforated anti-slip walkways (approx. 400 mm wide) on both sides between spill tray and chassis rails * Hose storage system approx. 4,500 mm long (including hose compartment) for: * 2 × DN 200 hoses (outer positions) * 2 × DN 160 hoses (centre position) * Rear stainless steel hose box: * Approx. 300 mm deep * Splash-proof * Stainless steel lid with full rubber seal * Drain opening at the lowest point * Stainless steel grounding lug at the rear right-hand side of the chassis * International grounding identification label * Rear access steps on the right-hand side leading to the underrun protection * Additional anti-slip step on the right-hand main chassis rail (approx. 260 × 300 mm) ## Axles & Suspension * SAF disc brake axles * Laser wheel alignment for reduced tyre wear and fuel consumption * Offset axle spacing: 1,410 / 1,310 mm * Suitable for combined transport up to a gross combination weight of 44 tonnes * Air suspension * First axle with automatic lift axle * Automatic lowering function and traction aid Bedpfxjy Tvphs Al Aeln * Lift axle activated by pressing the brake pedal three times * Traction aid operational up to 30% axle overload and speeds of up to 25 km/h ## Braking System * Dual-line compressed air braking system * Colour-coded air lines for simplified servicing * Spring parking brake * Non-interchangeable air couplings at the front (without connecting hoses) * Electronic Braking System (EBS) * Front EBS socket without connecting cable * Lift and lowering valve * Vehicle Stability Control System * Axle load monitoring via EBS CAN bus for display in the truck dashboard (truck preparation required) Note: The trailer may only be operated with towing vehicles capable of ensuring the correct functioning of the ABS system. ## Wheels & Tyres * 385/65 R22.5 tyres * Manufacturer's choice * Steel wheels, factory silver finish ## Electrical System * 24 V electrical system * Multi-chamber rear lights * Yellow LED side marker lights * Two white front position lights * Two red/white rear outline marker lights * 15-pin front connector (without connecting cable) # Approval & ADR Equipment * ECE R70 rear warning plate * ADR approval in accordance with ADR 9.1.1.2 * Approved for EX/II and EX/III vehicles * ADR vehicle approval certificate for the transport of certain dangerous goods (formerly B3) * Rear warning plate included * Not approved for UN 0331 and UN 0332 explosives (Class B-E) * Contour markings in accordance with ECE R048: * White reflective markings on the sides * Yellow reflective markings at the rear

Condition: new, power: 346 kW (470.43 HP), fuel type: diesel, tire size: 12.00R20, axle configuration: 6x4, wheelbase: 3,500 mm, fuel: diesel, fuel tank capacity: 680 l, color: white, gearing type: mechanical, emission class: euro3, Year of construction: 2026, Equipment: air conditioning, cruise control, fog lights, trailer coupling, = Additional options and accessories = - Immobiliser - LED headlights - Spare wheel - Sun visor = Remarks = Cabin type: Sleeper - Active Time Country of origin: SPAIN Displacement: 12,900cc Gcw: 120 Tons Brakes: Drum , Air Dual circuit Steering: LH Construction: Tractor Head Headlamps Protection Roof Rotating LED lights 7+7 Pin Trailer plug Fuel Tank 680 LT Pneum. Horn-Chassis PTO pre - equipment Curtains on door windows 2 lowered bunks w/o prot net Heated Electric rear mirrors rear dampers Front multileaf susp Loads 7500-13000kgs Drive T. 12.00R20 EBS+BAS Safety Hor. Filter cartridge Horizontal air filter 630cc air compressor Standard airtank plating Steel air tank 90A alternator Standard Gear mode 08329 APU free discharge Horizontal batt side fram Manuals EMEA APAC STD Cab insulation Standard grey plastic part Mechanical cab suspension Manual Cab Tilt At lowroof cab Roof in Standard color Standard reverse Temperate countries preparation S Disp oper ped post Fabric air susp driver seat Limitation on cc Lower exhaust pipe Eng RPM = 1900 REV/ 5th W EC POSI06139 Mounting Plate H=16MM Rear anti roll bar Filter HP TR/No heat ZF 16S 2520 to GBOX Standard Headlights Plates in ECC languages Jack R. overhand 785mm Bulb rear lights Electronic Battery cut off Emission Euro III Fabric Sta. 2 way Adj Pass Engine Plate Radiator Guard Provision Radio and CB Rear suspension no spacer Rear Axle ratio 4.23 Rear cross member Rear Multileaf Susp Rever Monotone buzzer Bljdey Tydvepfx Al Aon Steel wheels Grey IC444 chassis Standard Cab Trim MPH/KPH speedometer Speed limiter 90KM/H Soft touch foam steering wheel With stickers 79240 Aux. Chassis for 5th wheel Pre heater Trattam Prot STD Towing version Trye inflation hose Vin Code check digit Warning Triangle Radice VIN WJM STD Setting C11/C13 Tryes 12.00R20 5th wheel 3 1/2" + moun. Plate Steel front bumper Front Anti Roll Bar = More information = Tyre size: 12.00R20 Number of cylinders: 6 Engine capacity: 12.900 cc Empty weight: 9.980 kg

Condition: excellent (used), For sale: a Vötsch VT 7004 climate chamber, designed for precise research and testing under controlled temperature conditions. This unit is suitable for use in laboratories, quality control departments, materials research, electronics, and the automotive industry. The chamber is equipped with an electronic temperature controller, an efficient cooling system, and a forced air circulation system that ensures uniform temperature distribution throughout the working chamber. The interior is made of stainless steel, which facilitates cleaning and ensures high durability. Technical data: Bedpfjzi U Tnex Al Ajln Manufacturer: Vötsch Industrietechnik GmbH Model: VT 7004 Year of manufacture: 2000 Device number: 58566024350010 Power supply: 230 V AC, 50 Hz Rated power: 2.0 kW Rated current: 10 A Refrigerant: R404A – 0.7 kg R23 – 0.22 kg Maximum working pressure: 25 bar Interior: stainless steel Electronic temperature controller Forced air circulation Door with silicone seal Lighting and service access port in the chamber Compact design Condition: Used unit. Visually in good condition. The chamber is clean and complete. Sold in the exact condition as shown in the pictures.

Condition: excellent (used), For sale: SEW-EURODRIVE R32DT71D6 geared motor with a three-phase electric motor, 0.25 kW. The unit is fully functional, tested, and ready for operation. The technical and visual condition is good. Normal signs of use resulting from operation are visible. Thanks to its robust construction, the geared motor is ideal for driving conveyors, feeders, production machines, mixers, and other industrial equipment. Bledpfx Aeznfb Tol Ajn Technical data: Manufacturer: SEW-EURODRIVE Type: R32DT71D6 Power: 0.25 kW Motor speed: 870 rpm Output speed: 36 rpm Power supply: 220 V Δ / 380 V Y Frequency: 50 Hz Rated current: 1.65 / 0.95 A Power factor: cos φ 0.80 Protection class: IP54 Insulation class: B Duty cycle: S1 (continuous operation) Design: IM B8 Weight: 11.17 kg Country of manufacture: Germany

Condition: excellent (used), For sale: SEW-EURODRIVE S40DT71D-4 geared motor with a 0.37 kW three-phase motor. The unit is used, fully functional, and ready for operation. Its technical and visual condition is good, with normal signs of use. It is ideally suited for driving conveyors, feeders, industrial machines, and other applications requiring a reliable drive. Technical data: Blsdpfx Ajznm Rcel Aon Manufacturer: SEW-EURODRIVE Type: S40DT71D-4 Power: 0.37 kW Motor speed: 1400 rpm Output speed: 69 rpm Torque: 43 Nm Gear ratio: i ≈ 20.3 Power supply: 3×220Δ / 380Y V, 50 Hz Current: 2.25 / 1.3 A Protection class: IP44 Insulation class: B Power factor: cos φ = 0.7 Design: B3B Country of manufacture: Germany

Condition: excellent (used), For sale: SEW-EURODRIVE WA20DT71D4BMG geared motor with a 0.37 kW three-phase motor and an integrated 230 VAC brake. The unit is fully functional, tested, and ready for operation. The technical condition is very good, with normal signs of wear and tear resulting from use. Technical specifications: Manufacturer: SEW-EURODRIVE Type: WA20DT71D4BMG Power: 0.37 kW Motor speed: 1380 rpm Output speed: 56 rpm Gear ratio: i = 32.09 Torque: 54 Nm Bjdpjznncgjfx Al Aoln Power supply: 3×230/400 V, 50 Hz Current: 2.15/1.24 A Protection class: IP54 Insulation class: B Mounting method: IM H1A Brake: 230 VAC Weight: 12 kg Year of manufacture: 1997 Made in Germany.

Condition: excellent (used), For sale: SEW-EURODRIVE SF31DT71D-4BM geared motor with a 0.37 kW three-phase motor and an integrated 220 V AC electromagnetic brake. The unit is fully functional, tested, and ready for use. The geared motor is in good technical and visual condition. Normal signs of wear and tear resulting from use are visible. Technical data: Manufacturer: SEW-EURODRIVE Type: SF31DT71D-4BM Motor power: 0.37 kW Power supply: 3×220Δ / 380Y V, 50 Hz Motor speed: 1380 rpm Output speed: 42 rpm Torque: 60 Nm Brake: 220 V AC Braking torque: 5 Nm Bodpfx Asznnm Sel Aeln Protection class: IP54 Insulation class: B Weight: 16.88 kg Mounting position: IM V1A Year of manufacture: 2002 Country of manufacture: Germany

Condition: excellent (used), For sale: SEW-EURODRIVE SF31DT71D-4 geared motor with a three-phase motor, 0.37 kW. The unit is fully functional, tested, and ready for operation. The technical condition is very good, and it shows normal signs of use, with some localized paint wear on the fan cover. The robust worm gear ensures quiet operation and reliability, making this geared motor ideal for driving conveyors, feeders, production machines, packaging machines, and other industrial equipment. Technical data: Manufacturer: SEW-EURODRIVE Type: SF31DT71D-4 Bsdpfsznv Dljx Al Aoln Power: 0.37 kW Power supply: 3×220/380 V, 50 Hz Motor speed: 1380 rpm Output speed: 67 rpm Output torque: 39 Nm Design: B5/A Protection class: IP54 Insulation class: B Weight: 13.69 kg

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, Cryovac packing line whit Cryovac VS 90 belt vacuum machine and Cryovac hot water shrink tunnel mod ST 77 SRH. Belt wide 70 cm. Can be combined whit a busch 400 cc vacuum pump. Bledpfxoydnupo Al Asn

Condition: new, Year of construction: 2026, Belts and Accessories We offer top-quality conveyor belts suitable for all common screening machines and shredders. Custom-made to your specifications, we guarantee reliable performance and long service life. Suitable for Screening Machines - Doppstadt SM 518 / SM 618 / SM 620 / SM 720 Bsdpfx Aoyg D S Nsl Aeln - Terra Select T4 – T7 - Komptech Max - Mustang and other models Suitable for Shredders - Doppstadt Bison / Buffalo / Mammoth, Biopower, Inventhor - AK 430 / 510 / 635 - and other popular models Technical Features & Versions - Length: unlimited, tailored to customer requirements - Width: up to 1,800 mm - Number of plies: 2, 3, or 4 as required - Various profiles for optimal conveying performance - Steel cord quantity: 10 cm / 35 ±1 - Various material thicknesses available Your Advantages - Custom manufacturing according to your specifications - Superior quality for maximum service life - Short delivery times for rapid availability - Reliable performance for all common machines Contact us for a tailored quote and advice on conveyor belts for your application.

Condition: used, Year of construction: 2019, MAXIMUM CHIPPER DIAMETER: 250 MM ENGINE POWER: 75 kW GRINDING DRUM WIDTH: 640 MM GRINDING ROLLER DIAMETER: 660 MM UPPER ROLLER WIDTH: 640 MM Bedpfx Aleyffi Tj Ajln MAXIMUM OPENING OF UPPER ROLLER: 600 MM KNIVES ON MACHINE: 3 FEED ROLLERS: 2

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: P1065-22-A-01, controller model: Siemens SPS S7, wall material: stainless steel, cooling capacity: 180 kW (244.73 HP), nominal flow rate: 16,500 m³/h, product height (max.): 150 mm, Due to a rescheduling of a site visit, the auction end date has been postponed to Thursday, June 25, 2026! The new price of the machine was €650,000! TECHNICAL DETAILS Capacity (for rolls weighing approximately 60g): 10,000 - 15,000 pieces/hour Layout: 180° layout Levels: 17.5 Free product height: approx. 150 mm Level spacing: approx. 216 mm Total cooling capacity: approx. 180 kW Total power consumption: approx. 70 kW Power connection: 400 / 230 V, 3-phase, 50 Hz Refrigerant: R717 Refrigerant supply: NH3 pump system Ambient temperature: above 10 °C Belt system Belt guidance: from bottom to top Infeed height: approx. 8,500 mm / 500 mm outside the cell wall Outfeed height: approx. 4,728 mm / 400 mm outside the cell wall Belt type: Stainless steel wire belt with side edges on both sides Belt mesh: 12.7 x 27.43 mm Wire thickness: 1.4 mm Belt width: approx. 762 mm Usable belt width: approx. 700 mm Usable belt length: approx. 300 m Belt length including infeed and outfeed: approx. 320 m Housing Housing length: approx. 8,700 mm Housing width: approx. 6,920 mm Housing height: approx. 5,200 mm Insulation thickness: approx. 140 mm Plastic elements: approx. 2,600 mm Width of operator walkway: approx. 1,500 mm Evaporators Number of evaporators: 4 units Evaporator capacity: approx. 60 kW each Air flow: vertically drawing, 45° upwards Air temperature: approx. -32 °C Evaporation temperature: approx. -40 °C Defrosting: manually with air or hot gas Evaporator surface area: 311 m² each Air volume: 16,500 m³/h each Fans: 4 units per evaporator Fan power: approx. 7.5 kW Air ring heater: 4 x 0.72 kW Defrosting interval: sequential Heater in the pan: hot gas Control and switch cabinet Control system: Siemens PLC S7 CPU: 1512SP-PN Touchscreen: 12" Operating panel: TP-1200 Comfort Panel Interface to the refrigeration unit: 0 - 10 V Main drive: 1 x approx. 2.2 kW Overdrive: approx. 1.1 kW Switch cabinet: stainless steel on a stainless steel frame Temperature display: min. 1x per day Operating hour counter: available Belt cleaning: freely programmable Alarm light: optical, green / yellow / red Construction Material: Stainless steel 1.4301 Conveyor belt: Stainless steel, 762 mm Side guide for conveyor belt: approx. 25 mm Number of outlets: 2 units Product guides: 2 units EQUIPMENT Stainless steel construction Insulated housing with 140 mm insulation thickness Stainless steel belt with side edges on both sides Belt path from bottom to top Bjdpfjzardtox Al Aoln Internal arrangement of the single-tower spiral Infeed at the bottom Outfeed at the top Hygienic design Food-grade plastics Easy-to-maintain accessibility SEW main drive with Danfoss frequency converter SEW overdrive with Danfoss frequency converter Motors in energy efficiency class IE3 Siemens PLC S7 with CPU 1512SP-PN TP-1200 Comfort Panel Touchscreen display Variable belt speed Operating hour counter Fault reporting system with traffic light and signal horn Emergency stop switch and safety sensors Height and belt control on each level Stainless steel cabinet on stainless steel frame Freezer LED lighting controlled via the touch panel Welded stainless steel base pan with slope and drainage Under-freezing protection heater with a reserve circuit Floor temperature sensor with reserve sensor 4 separate evaporator units, each with one fan Evaporator pipes made of stainless steel Evaporator housing made of stainless steel Evaporator pans made of stainless steel Hot gas defrosting made of stainless steel in the unit Sequent

Condition: new, range L-W-H 960 x 460 x 860 mm weight 75 kg 8 St. Tool trolley with 8 drawers, all with tools. - The pull-out drawers are all ball-bearing. - The entire workshop trolley is lockable. - The workshop trolley has 4 stable castors, 2 steerable and lockable. - The tools included are made of chrome vanadium steel. - The workshop trolley has 4 stable castors, 2 steerable, 2 lockable, which ensure very comfortable rolling. On the tool trolley there is a stable worktop made of polypropylene plastic. - The tools included in the workshop trolley are made of chrome vanadium steel and are stored in Styrofoam/foam inserts. + Drawer 1: - 1/4" inch: 13 nuts from 4mm to 14mm, 11 long nuts 4mm – 13mm Ratchet, universal joint, extension. - 3/8" inch: 10 nuts from 10mm to 19mm, 11 long nuts from 6mm to 19mm Ratchet, universal joint, extension. - 1/2" inch: 17 nuts from 8mm to 32mm, 9 long nuts from 10mm to 22mm Ratchet, universal joint, extension. + Drawer 2: Bsdpfx Aozb Rbtjl Aeln - Accessories 1/4" inch ratchet: Torx nuts without hole T8,T9,T10,T15,T20,T25,T27,T30,T40 Torx nuts with hole TT8,TT9,TT10,TT15,TT20,TT25,TT27,TT30,TT40. Allen nuts H3 to H8 Slotted nuts SL4 to SL7 Cross nuts PZ0 to PZ3, PH0 to PH3 Multi-tooth nuts M8, M10, M12 Five-star nuts TS10, TS15, TS20, TS25, TS27, TS30, TS40, TS45, TS50 - Accessories 3/8" inch ratchet: Attachment for bits Torx nuts without hole T40, T45, T50, T55, T60, T70 Torx nuts with hole TT40, TT45, TT50, TT55, TT60, TT70 Allen nuts – H7, ??H8, H10, H12, H14 Slotted nuts SL8, SL10, SL12 Cross nuts PZ3, PZ4, PH4, PH8 - Accessories 1/2" inch ratchet: Allen H14,H17,H19,H22,H24 Allen key H5,H10,H11,H13 Torx T40,T45,T50,T55,T60,T70,T80 Ribe R9, R10, multi-tooth M16 Multi-tooth M9,M10,M12,M14,M16,M18 Short attachment, long attachment, medium attachment, Torx T30,T45,T50, Allen key H7 + Drawer 3: - Open-end ratchet wrench 8-9-10-11-12-13-14-15-16-17-19-22mm; - Double ring spanner set 8-piece 6-7mm, 8-9mm, 10-11mm, 12- 13mm, 14-15mm, 16-17mm, 18-19mm, 20-22mm - Torque wrench + Drawer 4: - Precision mechanics screwdriver Slotted: SL3.0 x 100mm, Cross: PH0 x 100mm - Screwdriver with soft grip and outside hexagon: Slotted: SL6 x 38mm ; SL5 x 75mm ; SL6 x 100mm ; SL8 x 150mm Cross: PH2 x 38mm ; PH1 x 75mm ; PH2 x 100mm ; PH3 x 150mm - Torx screwdriver: T6 x 80 ; T7 x 80 ; T8 x 80 ; T9 x 80 ; T10 x 80 ; T15 x 100 ; T20 x 100 ; T25 x 100; T27 x 100 T30 x 100 ; T40 x 150. + Drawer 5: - T-handle Allen / hexagon set with ball head: 3 x 115mm ; 4 x 120mm ; 5 x 140mm ; 6 x 160mm ; 7 x 170mm ; 8 x 175mm ; 10 x 200mm. - T-handle TORX T10 – T40 + Drawer 6 - Circlip pliers set inside/outside 4 pcs., 2x curved, 2x straight - Pliers set: combination pliers, side cutters, straight needle-nose pliers, curved needle-nose pliers, pipe wrench. - hammer + Drawer 7 - Socket wrenches 6, 7, 8, 10, 11, 12, 13, 14mm + Drawer 8 - Tools for bodywork processing

Condition: used, Year of construction: 1990, machine/vehicle number: 6171809, Rüttler mit Ausstreichwalze - Jogger with airremoval rollers Zöll Diplomat 701 PREYear 1990 - Serial-No. 6171809 Size max. 860 x 1210mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Blodpfxeh Axhze Al Ajn Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1986, Fensterfalztasche - Altarfalztasche - Gateway Buckle MBO für K/T 79erYear 1985 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Blsdpfx Ajh Ax Aqsl Asn

Condition: new, range L-W-H 960 x 460 x 860 mm weight 75 kg 8 St. Tool trolley with 8 drawers, all with tools. - The pull-out drawers are all ball-bearing. - The entire workshop trolley is lockable. - The workshop trolley has 4 stable castors, 2 steerable and lockable. - The tools included are made of chrome vanadium steel. - The workshop trolley has 4 stable castors, 2 steerable, 2 lockable, which ensure very comfortable rolling. On the tool trolley there is a stable worktop made of polypropylene plastic. - The tools included in the workshop trolley are made of chrome vanadium steel and are stored in Styrofoam/foam inserts. + Drawer 1: - 1/4" inch: 13 nuts from 4mm to 14mm, 11 long nuts 4mm – 13mm Ratchet, universal joint, extension. - 3/8" inch: 10 nuts from 10mm to 19mm, 11 long nuts from 6mm to 19mm Ratchet, universal joint, extension. - 1/2" inch: 17 nuts from 8mm to 32mm, 9 long nuts from 10mm to 22mm Ratchet, universal joint, extension. + Drawer 2: - Accessories 1/4" inch ratchet: Torx nuts without hole T8,T9,T10,T15,T20,T25,T27,T30,T40 Torx nuts with hole TT8,TT9,TT10,TT15,TT20,TT25,TT27,TT30,TT40. Allen nuts H3 to H8 Slotted nuts SL4 to SL7 Cross nuts PZ0 to PZ3, PH0 to PH3 Multi-tooth nuts M8, M10, M12 Five-star nuts TS10, TS15, TS20, TS25, TS27, TS30, TS40, TS45, TS50 - Accessories 3/8" inch ratchet: Attachment for bits Torx nuts without hole T40, T45, T50, T55, T60, T70 Torx nuts with hole TT40, TT45, TT50, TT55, TT60, TT70 Allen nuts – H7, ??H8, H10, H12, H14 Slotted nuts SL8, SL10, SL12 Cross nuts PZ3, PZ4, PH4, PH8 - Accessories 1/2" inch ratchet: Allen H14,H17,H19,H22,H24 Allen key H5,H10,H11,H13 Torx T40,T45,T50,T55,T60,T70,T80 Ribe R9, R10, multi-tooth M16 Multi-tooth M9,M10,M12,M14,M16,M18 Short attachment, long attachment, medium attachment, Bsdpsu Impyofx Al Ajln Torx T30,T45,T50, Allen key H7 + Drawer 3: - Open-end ratchet wrench 8-9-10-11-12-13-14-15-16-17-19-22mm; - Double ring spanner set 8-piece 6-7mm, 8-9mm, 10-11mm, 12- 13mm, 14-15mm, 16-17mm, 18-19mm, 20-22mm - Torque wrench + Drawer 4: - Precision mechanics screwdriver Slotted: SL3.0 x 100mm, Cross: PH0 x 100mm - Screwdriver with soft grip and outside hexagon: Slotted: SL6 x 38mm ; SL5 x 75mm ; SL6 x 100mm ; SL8 x 150mm Cross: PH2 x 38mm ; PH1 x 75mm ; PH2 x 100mm ; PH3 x 150mm - Torx screwdriver: T6 x 80 ; T7 x 80 ; T8 x 80 ; T9 x 80 ; T10 x 80 ; T15 x 100 ; T20 x 100 ; T25 x 100; T27 x 100 T30 x 100 ; T40 x 150. + Drawer 5: - T-handle Allen / hexagon set with ball head: 3 x 115mm ; 4 x 120mm ; 5 x 140mm ; 6 x 160mm ; 7 x 170mm ; 8 x 175mm ; 10 x 200mm. - T-handle TORX T10 – T40 + Drawer 6 - Circlip pliers set inside/outside 4 pcs., 2x curved, 2x straight - Pliers set: combination pliers, side cutters, straight needle-nose pliers, curved needle-nose pliers, pipe wrench. - Lath hammer + Drawer 7 - Socket wrenches 6, 7, 8, 10, 11, 12, 13, 14mm + Drawer 8 - Tools for bodywork processing

Condition: ready for operation (used), Year of construction: 2013, Two Geiss CNC machining centers are available. 1) Geiss FZ 2000x1000, year of manufacture: 2012, travel path X/Y/Z: 2450mm/1400mm/800mm, B-axis: 285°, C-axis: 520°, speed: 30000rpm, table dimensions X/Y: 2000mm/1000mm, machine dimensions Y/Z: 2500mm/2450mm, weight: approx. 30500kg. 2) Geiss FZ 2800x1000, year of manufacture: 2013, table dimensions X/Y: 2800mm/2000mm, weight: approx. 42000kg. The Geiss machine with the year of manufacture 2013 has spindle problems. A cost estimate is available for this. The repair can be carried out before the sale or by the buyer. Documentation available. An on-site inspection is possible. Individual sale possible. Bjdpfxoy Ant Ro Al Asln

Year of construction: 2010, condition: ready for operation (used), A large-format vacuum thermoforming machine Geiss with two window plates is available. Heating power: 360kW, connected load: 370kW, window plates: 2, min. window plate dimensions 1: 1360mm/860mm, max. window plate dimensions 1: 2460mm/1460mm, window plate adjustment 1 X/Y: 1100mm/600mm, min. window plate dimensions 2: 940mm/520mm, max. window plate dimensions 2: 2400mm/1400mm, window plate adjustment 2 X/Y: 1460mm/880mm, materials: PS/ABS/TPU/PMMA. Total system dimensions X/Y/Z: approx. 9150mm/2350mm/4000mm, total weight: approx. 15500kg, control: Siemens Simatic Panel PC, operating hours (April 2026): approx. 20100h. Documentation available. An on-site inspection is possible. Without vacuum pump, spare parts and temperature control unit. Expected to be available from October 2026. Blsdoy Aafrspfx Al Aon

Year of construction: 2000, condition: ready for operation (used), Model: GEISS U8 (nominal size 1000 × 1500 mm) Bedpfsxwp I Nsx Al Aeln Sheet size: 1000 × 1500 mm (feed) Max forming area: approx 1460 × 960 mm (subject to verification) Draw depth: ~400 mm Working height: ~1140 mm Features: Closed-chamber vacuum forming machine; stepless adjustable clamp frame; integrated vacuum system; cooling fans with water-mist; window plate adjustment; suitable for sheet/roll feed.

Condition: refurbished (used), Year of construction: 2020, operating hours: 386 h, functionality: fully functional, Powerful and reliable refurbished ride-on scrubber with disc brushes, ideal for medium to large floor areas. Bodpfx Aljz Hwlro Ajln

Year of construction: 2008, condition: ready for operation (used), A Geiss large-format vacuum thermoforming machine is available. Panel cutting min.: 1100mm/1300mm, max. panel cutting: 2100mm/1800mm, max. forming depth: 620mm. Additional panel format 1: min.: 850mm/750mm, max.: 1850mm/1250mm. Additional panel format 2: min.: 1050mm/800mm, max.: 2050mm/1300mm. Including a separate loading machine with pneumatic panel separating equipment, an automatic aligner for panel cuts in longitudinal and transverse direction, a pneumatic pusher for removing the molded parts from the loading unit, fully automatic central lubrication of the loading machine, several interchangeable pallets for window panel sets, a storage rack for window panels as well as a vacuum control with four independently adjustable flow stages and an air preparation system. Documentation available. On-site inspection is possible. Bljdpfxewih Ars Al Aon

Year of construction: 2008, condition: ready for operation (used), A 5-axis CNC milling machine Geiss with full encapsulation is available. Travel X/Y/Z: 2500mm/2200mm/760mm, tool holder: ER25, spindle power: 11kW, milling head type: orthogonal milling head, control: Siemens Sinumerik 840 Di solution line. Documentation available. On-site inspection is possible. Bledjwih Alspfx Al Asn

Condition: refurbished (used), Year of construction: 2022, operating hours: 261 h, functionality: fully functional, The Tennant T7 cylindrical scrubber is a powerful and reliable ride-on scrubber for thoroughly cleaning medium to large floor areas. Thanks to its cylindrical brush system, the machine not only scrubs the floor, but also picks up small loose debris during the cleaning process. This machine has been professionally refurbished, technically inspected, and is ready for immediate use. Bjdpfx Aloz Hfydo Ajln

Condition: used, Year of construction: 2009, machine/vehicle number: 94796, For 28x44mm Caps Disc Diameter : 700mm Blsdpoz Iaqmsfx Al Asn