Used Hardness Tester Wmw Wpm for sale (3,136)

Condition: ready for operation (used), Center height: 450mm, distance between centers: 3000mm, fuse protection: 630A, rated current: 46A, control voltage: 220V, operating voltage: 380V, frequency: 50Hz, connected load: 22,5kW, weight: 6,1t, with four-jaw chuck (diameter: 800mm), tailstock, quill and three steady rests. An on-site inspection is possible. Dedpfx Ajzukufsl Sowc

Condition: used, Bed length: 4500mm, control voltage: 220V, operating voltage: 380V, rated current: 110A, rated current, slow-blow fuse: 125A, connected load: 58kW, weight: 35t, with tailstock, clamping device, external electric motor for roll rotation, control panel, storage table, five steady rests and additional accessories. An on-site inspection is possible. Dwodpfjzulg Njx Al Sec

Condition: used, mileage: 763,819 km, power: 368 kW (500.34 HP), first registration: 04/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 05/2026, brakes: retarder, color: green, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, Cab & Comfort* Cab with high roof 'XXL' (2440 mm wide, 2280 mm long) * Seat covers in comfort quality * Driver's comfort seat, air-sprung, climate-controlled, with lumbar support and heating * Co-driver's comfort seat, air-sprung, with lumbar support, shoulder adjustment and heating * 2 sleeping berths with storage space and mattresses with zone hardness division * Electric tilting sunroof * Cooler box under the sleeping berth * Storage box accessible from inside and outside * Carpet on the engine tunnel Interior design in Urban Concrete----Engine, Transmission & Chassis* Engine D2676LF51, 500 hp / 368 kW, EURO6 SCR, 2500 Nm * Transmission MAN TipMatic® 12 26 DD with retarder * Transmission software MAN TipMatic® Profi (for road use) * Front axle VOK-09, angled, parabolic springs 8.0 t * Rear suspension air suspension * Differential lock in rear axle * HY axle ratio i = 2.71 * Tag axle NOL-08, steerable and liftable ----3. Safety & Assistance Systems * MAN BrakeMatic (electronic braking system) * Emergency Brake Assist 2 (EBA2, non-deactivatable) * Anti-lock Braking System (ABS) * Anti-Slip Regulation (ASR) * Electronic Stability Program (ESP) * Lane-Guard System IV (LGS IV) * Emergency Stop Signal (ESS) * Headlight cleaning system * Disc brakes front and rear * All-round and transverse curtains ----Electronics & Multimedia* Instrument panel km/h 'High-Line colored' * MAN sound system * Radio MAN Media Truck Advanced with 7" color display and navigation preparation * Digital radio reception DAB+ * Navigation SD card EUROPE COMPLETE * Connectivity Board Module (RIO Box) * Hands-free system for 2 mobile phones (Bluetooth®) * MAN CameraView - preparation for rear camera (2 cameras) * TollCollect pre-equipment ----Climate & Heating* Stand-alone air conditioning R134A * Auxiliary air heater EBERSPÄCHER D4S * Cab insulation NORDIC (against cold) * Heater for fuel filter ----Lighting & Visibility* LED daytime running lights * Halogen double headlights H7 * High and low beam headlights with cornering lights * 2 work lights on the cab roof * Entry lighting for driver and co-driver * Electric windows * Sun visor and electric sun blinds ----Further Equipment * Aluminum wheels ALCOA Dura Bright EVO * Fuel tank aluminum 780l on the right and 80l AdBlue * Central locking with remote control * 2 additional vehicle keys * Compressed air connection in the cab, compressed air hose and pistol Dwjdox I Ux Ropfx Al Sjc * Battery main switch mechanical, 2 batteries 12V 225Ah * Speed limiter electronic 90 km/h, cruise control * Various storage compartments, cup holders, drawers -----Internal vehicle number: 11625----Errors and prior sale excepted. WhatsApp support available! If you have any questions about the vehicle or would like more information, please feel free to contact us conveniently via WhatsApp. Whatsapp Whatsapp

Condition: good (used), Granite measuring plate, 760 x 1190 x 700 mm Dimensions: H x W x D 760 x 1190 x 700 mm Dodpfx Asxl Rkusl Sswc Material thickness: 800 mm You can find more new and used items in our shop! International shipping costs available upon request!

Operating hours: 3,888 h, condition: good (used), Heraeus Weathering Test Device Xenotest 1200 CPS Xenon device for testing the lightfastness and weathering resistance of materials under simulated conditions. Rapid exposure device with program control and radiation control. The Xenotest 1200 CPS is equipped with: 3 Xenon lamps NXE 4500 Optional filter system Microprocessor control including data display Simultaneous or alternating/simultaneous operation function Humidity function Spraying function Electrical connection Voltage: 400 V Rated current: 50 A max. Connection power: 33 kVA max. Power consumption of the xenon lamps: 2.8 - 6 kW per lamp Compensation: 3 capacitors at 50 uF Operating hours: 3888 Djdpjxal Hasfx Al Sjwc Housing dimensions: W x H x D 900 x 1900 x 1700 mm Weight: 800 kg More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: good (used), Reinhardt LTV 100 Oven, 200°C Manufacturer: Reinhardt Type: LTV 100 Usable volume: 0.65 m³ Steam volume: 1.04 m³ Output: 10.56 kW Fresh air exchange rate: 1 l/min Loading system with 7 supports, size W x D: 770 x 850 mm Voltage: 380 V Dodjxbf T Nopfx Al Sjwc Operating temperature: 50°C - 200°C Nominal temperature: 130°C Dimensions H x W x D: 2050 x 1650 x 1180 mm Chamber: H x W x D: 1000 x 800 x 950 mm You can find more new and used items in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2011, operating hours: 12,500 h, Ref:11160 . 2011 Muller Martini Acoro A5 Preparation Binder ONLY 12,500 HOURS WORKED! Preparation line for producing lined book blocks for hard cover production or soft bound books. Comprising: Triple hand feed element to spiral raceway element 3641 M.M. 3648 Twin end sheet feeders with Robatech hot-melt gluing M.M. Automatic motorised make-ready with “Commander” control system M.M. ‘Acoro A5’ binder with 20 x 21” Combi-clamps ICS 80 & ICS 30 Hot-melt pre-melt tanks Hot-melt spine gluing Hot-melt side gluing Gauzing/lining unit Pile/rotary cover feeder with pressing & nipping station 2nd nipping station Lay-down delivery unit to; Flat conveyor system (details on request) to; M.M. 3671 ‘Merit S’ automatic pile trimmer with auto setting. Specification: Dodpfxsz Izape Al Sjwc A5/21” Binder book sizes, Max: 430 x 320 mm Min: 140 x 100 mm Book thickness, : 3 -- 60 mm

Condition: good (used), Hommel Dura measuring plate/inspection plate made of natural hard stone (granite plate) Hommel Dura measuring plate made of hard stone (granite plate) Length: 3000 mm Width: 1000 mm Thickness: 300 mm 1 x T-slot No. 2724 Suitable as a measuring plate, inspection plate and precision work surface. You can find more measuring plates in other sizes – new and used – in our shop! International shipping costs available upon request! Dodpfx Aok Shcuol Sowc

Condition: good (used), Samed Innovazioni MM 1 Corner cutter for hardcovers Produced in Italy, Samed Innovazioni Rebord. Very good condition. This is a professional, production device for cutting corners for hardcover. Dwedpjz N Sh Usfx Al Ssc Year of production 2014. Solid construction ensures precision of operation. Interchangeable knives. Adjustable cutting depth. One set of knives included.

Condition: used, mileage: 42,169 km, power: 125 kW (169.95 HP), first registration: 04/2025, fuel type: diesel, empty load weight: 2,569 kg, maximum load weight: 931 kg, overall weight: 3,500 kg, axle configuration: 2 axles, wheelbase: 4,325 mm, fuel: diesel, color: white, gearing type: automatic, suspension: other, number of seats: 3, total length: 6,967 mm, loading space length: 4,307 mm, loading space width: 1,780 mm, loading space height: 1,940 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), had accident, onboard computer, sliding door, soot filter, traction control, Disc brakes, double passenger seat, rear step, interior trim, wooden cargo floor, extra-long, right-hand mirror electrically adjustable, high roof, reversing warning system, partition, heat-insulating glass, clock & tachometer, brake pad indicator, 3-door, first owner, Euro 6e, green environmental badge (4), steel rims, reversing camera, black, passenger airbag, sliding door on the right, navigation with color monitor, color monitor for navigation system, parking assist, parking assist camera, parking assist sensors rear, parking assist sensors front, electric windows (2), seat heating, radio/MP3, outside temperature display, tinted glass, heated exterior mirrors, power steering, wooden interior trim, exterior mirrors electric, brake assistant, comfort seats, rear-wheel drive, third brake light, center armrest, country version Germany, further equipment available, errors and prior sale excepted, trade-in possible, financing possible, please contact us, we will prepare a customized offer for you. Nationwide delivery possible. 502 Digital extra: updates for intelligent speed assistant. A50 Front axle with increased load capacity. AR2 Axle ratio i = 3.923. B25 Parking brake, electric. BA3 Active brake assist. BH1 HOLD function. C6L Multifunction steering wheel. CB7 Stabilization level I. CL1 Steering wheel adjustable in inclination and height. CL3 Leather steering wheel. CT1 Vibration damper. CW2 Deletion of vehicle lowering. D03 High roof. D50 Continuous partition. E07 Hill start assist. E1D Digital radio (DAB). E1E Digital extra: hard disk navigation. E1U USB socket 5 V. E3D Preparation for DSP box. E3J Preparation for switch panel. E5 Electrical system for trailer socket. E7M MBUX multimedia system. ED8 Preparation for electrical system, parameterizable special module. ES0 Jump start - contact. ES5 Charging package, instrument panel. EW6 Digital extra: Remote Services Plus. EY2 Digital extra: Live Traffic Information. EY5 Mercedes-Benz emergency call system. EY6 Breakdown management. F1K Coat hooks in the driver's cab. F2W Winter package. F64 Exterior mirrors electrically foldable. F68 Exterior mirrors heated and electrically adjustable. Dwodpfxjz N S Ibe Al Soc

Condition: used, mileage: 45,826 km, power: 125 kW (169.95 HP), first registration: 03/2025, fuel type: diesel, empty load weight: 2,569 kg, maximum load weight: 931 kg, overall weight: 3,500 kg, axle configuration: 2 axles, wheelbase: 4,325 mm, fuel: diesel, color: white, gearing type: automatic, suspension: other, number of seats: 3, total length: 6,967 mm, loading space length: 4,307 mm, loading space width: 1,780 mm, loading space height: 1,940 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), had accident, onboard computer, sliding door, soot filter, traction control, Disc brakes, double passenger seat, rear step, interior trim, wooden cargo floor, extra-long, right-hand mirror electrically adjustable, high roof, reversing warning system, partition, heat-insulating glass, clock & tachometer, brake pad indicator, 3-door, first owner, Euro 6e, green environmental badge (4), steel rims, reversing camera, black, passenger airbag, sliding door on the right, navigation with color monitor, color monitor for navigation system, parking assist, parking assist camera, parking assist sensors rear, parking assist sensors front, electric windows (2), seat heating, radio/MP3, outside temperature display, tinted glass, heated exterior mirrors, power steering, wooden interior trim, exterior mirrors electric, brake assistant, comfort seats, rear-wheel drive, third brake light, center armrest, country version Germany, further equipment available, errors and prior sale excepted, trade-in possible, financing possible, please contact us, we will prepare a customized offer for you. Nationwide delivery possible. 502 Digital extra: updates for intelligent speed assistant. A50 Front axle with increased load capacity. AR2 Axle ratio i = 3.923. B25 Parking brake, electric. BA3 Active brake assist. BH1 HOLD function. C6L Multifunction steering wheel. CB7 Stabilization level I. CL1 Steering wheel adjustable in inclination and height. CL3 Leather steering wheel. CT1 Vibration damper. CW2 Deletion of vehicle lowering. D03 High roof. D50 Continuous partition. E07 Hill start assist. E1D Digital radio (DAB). E1E Digital extra: hard disk navigation. E1U USB socket 5 V. E3D Preparation for DSP box. E3J Preparation for switch panel. E5 Electrical system for trailer socket. E7M MBUX multimedia system. ED8 Preparation for electrical system, parameterizable special module. ES0 Jump start - contact. ES5 Charging package, instrument panel. EW6 Digital extra: Remote Services Plus. EY2 Digital extra: Live Traffic Information. EY5 Mercedes-Benz emergency call system. EY6 Breakdown management. F1K Coat hooks in the driver's cab. F2W Winter package. F64 Exterior mirrors electrically foldable. F68 Exterior mirrors heated and electrically adjustable. Dedpfx Aljz N S Iho Sewc

Condition: used, mileage: 72,108 km, power: 125 kW (169.95 HP), first registration: 05/2025, fuel type: diesel, empty load weight: 2,569 kg, maximum load weight: 931 kg, overall weight: 3,500 kg, axle configuration: 2 axles, wheelbase: 4,325 mm, fuel: diesel, color: white, gearing type: automatic, suspension: other, number of seats: 3, total length: 6,967 mm, loading space length: 4,307 mm, loading space width: 1,780 mm, loading space height: 1,940 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), had accident, onboard computer, sliding door, soot filter, traction control, Disc brakes, double passenger seat, rear step, interior paneling, wooden load floor, extra-long, right-side mirror electrically adjustable, high roof, reversing warning system, partition wall, heat-insulating glass, clock & tachometer, brake lining wear indicator, 3-door, single owner, Euro 6e, green environmental badge (4), steel rims, reversing camera, black, passenger airbag, right sliding door, navigation system with color display, color monitor for navigation system, parking assistance, parking assistance camera, parking sensors rear, parking sensors front, electric window lifters (2x), seat heating, radio/MP3, outside temperature display, tinted windows, heated exterior mirrors, power steering, wood trim, electric exterior mirrors, brake assist, comfort seats, rear-wheel drive, third brake light, center armrest, German country version, further equipment available, subject to errors and prior sale. Trade-in possible. Financing possible—please contact us for a customized offer. 502 Digital Extra: Updates for intelligent speed assistant A50 Front axle with increased load capacity AR2 Axle ratio i = 3.923 B25 Electrically operated parking brake BA3 Active Brake Assist BH1 HOLD function C6L Multifunction steering wheel CB7 Stabilization level I CL1 Steering wheel adjustable for tilt and reach CL3 Leather steering wheel CT1 Vibration damper CW2 Omission of vehicle lowering D0 High roof D5 Continuous partition wall E07 Hill-start assist E1D Digital radio (DAB) E1E Digital Extra: Hard disk navigation E1U USB port 5V E3D Pre-installation DSP box E57 Wiring for trailer socket E7M MBUX multimedia system ED8 Pre-installation electrics, programmable special module ES0 Jump-start connection ES5 Instrument panel charging package EW6 Digital Extra: Remote Services Plus EY2 Digital Extra: Live Traffic Information EY5 Mercedes-Benz emergency call system EY6 Breakdown management F1K Coat hooks in driver's cab F2W Winter package F64 Electrically folding exterior mirrors F68 Heated and electrically adjustable exterior mirrors FF5 Overhead shelf above windscreen FG8 Front cup holders FJ4 Storage compartment. Dwsdpfx Aloz N S H Rs Soc

Condition: excellent (used), Year of construction: 2025, Multifunction Safety Tester KT 1880B Multifunctional Safety Tester KT 1880B – Test Automation in 6U The KT 1880B is a compact safety tester in a 19" rack-mount format (5U) and combines all relevant test types in one device: high-voltage test (AC/DC), protective conductor test, insulation test, substitute leakage current test, function test, and continuity test. This enables the KT 1880B to meet the requirements for efficient, safe, and standards-compliant safety testing according to IEC, EN, UL, VDE, and other international standards – ideal for final inspection, manufacturing, and quality assurance. Technical Performance Data - High-voltage test AC: 100 - 5,500 V / 0 - 3 mA - High-voltage test DC: 100 - 6,000 V / 0 - 10 mA - Insulation measurement DC: 100 - 6,000 V / 250 kΩ - 1 GΩ - Protective conductor test AC: 10 - 30 A / 0 - 400 mΩ - Substitute leakage current test AC: 100 - 270 V / 0 - 10 mA - Continuity test DC: 24 V / 0 - 600 mA - Function test / current consumption AC: 4 A (Option: 1 A, 10 A, or 16 A) Djdpfxjzwlfws Al Sowc - Wide-range power supply: 90 to 253 V / 50 Hz / 60 Hz Test Automation & Ease of Operation Thanks to the integrated 4.3" TFT color display with intuitive menu navigation and freely configurable test programs, the KT 1880B enables a fully automated test sequence. The test item only needs to be connected once – no need to change connections. This significantly reduces test times and potential sources of error, making it a clear advantage, especially in automated production environments. Compliance with Standards & Operational Safety With a short-circuit current of 3 mA AC / 10 mA DC, the KT 1880B meets the requirements of EN 50191 for safety-current-limited devices. As a result, it can also be operated by non-electricians – ideal for companies with mixed testing staff structures. Fully Electronic High-Voltage Generator The integrated digital high-voltage generator ensures high accuracy and stable test results – even with demanding test cycles and under production conditions. Typical Applications - Serial production & final inspection - Type testing according to international safety standards - Production of electrical devices, components & assemblies - Automated testing environments & test benches Flexibility, Safety & Automation Combined The KT 1880B is the ideal solution for safety testing in industrial environments. With six integrated test types, fully electronic high-voltage technology, intuitive operation, and safety-current-limited design, it meets all the requirements for modern test automation. PLC KT 1880B Safety Tester Year of manufacture: 2025 Manufacturer's price: €6,545.00 gross Calibration: 06.03.2025 Remaining warranty available Accessories A3/1800-K Connection and operating panel + CEE16 Manufacturer's price: €1,318.00 gross Knürr TW 05 Device trolley, pre-assembled with: HL 02 Holder for high-voltage test probes SP 02 / SP 03 HL 81 Holder for protective conductor test probe PE 81-i KH 01 Cable holder Manufacturer's price incl. accessories: €3,300.00 gross Test probe SP02 + SP03 Manufacturer's price: €521.00 gross Protective conductor test probe PE 81-i Manufacturer's price: €311.00 gross PLC D 2012 Test dummy Manufacturer's price: €711.00 gross Rack-mount housing EH 1905-y Manufacturer's price: €653.00 gross Warning light set with LED WL25 Manufacturer's price: €327.00 gross "All from one source: We would be happy to offer you suitable bank financing for your project." More articles - new and use

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, OSAMA: IDEALTECH HEATED ROLLER MACHINE, MODEL HOTMASTER, GLUE MELTER, AND ROLLER PRESS The line includes: 1 feeding belt with a COSMA cleaning brush 1 IDEALTECH GLUE MELTER 1 OSAMA GLUE APPLICATION UNIT 1 OSAMA center belt 1 press (6 pressing rollers, 3+3) 1 COSMA discharge belt Metering and application rollers with resistors/oil heating system, 8 kW x 2 - No. 03/three motors at the end of the applicator and metering rollers, operating independently - Adjustable speed via no. 03 electric frequency regulators, with an automatic "reverse" rotation system for cleaning the machine at the end of the work cycle - Heating system with thermal oil and electric resistors - Automatic/motorized lifting of the upper rollers with digital position display - Upper applicator 3kW + lower pull 3kW + upper metering unit 0.75 kW - Part movement control 0.55 kW - Lifting torque for the upper rollers 0.18 kW - No. 02 motorized steel rollers at the machine's inlet - No. 02 motorized steel rollers at the machine's outlet - Stainless steel tank for machine cleaning - The machine is programmed to heat the rollers automatically without any control or operator intervention - Machine ready for the application of spray guns for dispensing PUR glue, without the spray guns - Machine ready for integration into a production line * No. 01 tube for extracting PUR glue fumes, diameter 145 mm. Dwedsz Ng Agepfx Al Ssc HIGH-TECH AUTOMATIC 6-ROLLER PRESS, MODEL CLR/6-1300, STANDARD CE, VOLTAGE 400/50 3PH Complete machine consisting of: - Inverter-controlled variable speed drive - Independent pressure adjustment system for each pair of rollers, with a shared pressure switch display for the main pressing rollers and the secondary drive rollers - Reinforced structure for high working pressure - No. 02+02 (four) pressing rollers made of rubber, Shore hardness 90 +-5 Shore - No. 02 (two) rollers positioned in the middle, made of chrome steel - Roller diameter 300 mm - Useful working width - Minimum/maximum working height 1300 mm 0-100 mm

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, wire diameter (max.): 0.3 mm, table load: 3,000 kg, controller manufacturer: MITSUBISHI, controller model: MV-4800, number of axes: 5, wire diameter (min.): 0.15 mm, This 5-axis Mitsubishi MV-4800 wire EDM machine was manufactured in 2018. It features a travel capacity of 800 x 600 x 510 mm and can accommodate workpieces up to 1200 x 1020 x 505 mm with a maximum weight of 3000 kg. The machine is equipped with advanced control features, including a 15" touch screen and 3D CAD/CAM capabilities. If you are looking to get high-quality wire EDM capabilities, consider the Mitsubishi MV-4800 machine we have for sale. Contact us for further details. Dodpfx Asz Nk T Njl Sewc - Travel (U, V): ±100 mm- Maximum Workpiece Dimensions: 1200 x 1020 x 505 mm- Maximum Workpiece Weight: 3000 kg- Table Base: Closed mounting base, 4-side hardened frame table- Drive System: Tubular direct drives in X/Y axes, Optical Drive System (ODS)- Measuring System: Linear scales in X, Y, U, V axes- Wire Threading: Intelligent AT - Automatic wire threading without water jet (for wire diameter 0.15 - 0.3 mm)- Wire Station: 20 kg wire station- Control Unit: MITSUBISHI ELECTRIC ADVANCE M700 with 15" Touch Screen- Control Features: 3D CAD/CAM on board, 10 GB user hard drive, ESPERADVANCE dialog system, 3D Parasolid import, 3D graphic check, Hand pilot- Control Interfaces: Ethernet TCP-IP, 2 x USB Port, prepared for mcAnywhere- Generator & Processing Technologies: - PFC (Precise Finish Circuit) high-speed sensing - HSS-AE Anti-Electrolysis Generator - ECONO CUT wire consumption reduction - POWER MASTER process safety system - CORNER MASTER³ radius shaping - ORBIT MASTER circular machining - DIGITAL AE II parallelism optimization - SL-CONTROL for height steps - TS-MASTER for homogeneous surface structures- Equipment: Automatic fine hole search, Easy 3D-Setup, Wire alignment block, Wire chopper, Compressor cooler, E.KO IONISER

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Safety Tester for High Voltage Test Station - EATON Sefelec 506-S The device was purchased in 2023 and is in excellent condition. The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is DSP-controlled. This technology offers the operator optimal stability and repeatability of measurements. The high precision and measurement speed are tailored to meet the requirements of quality assurance in production and incoming goods inspection. The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The new SEFELEC model series features a 7" touchscreen that impresses with its simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of test series - Sequence mode for combining multiple consecutive tests Withstand voltage at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC up to 1000 VDC Optional: 2TΩ range PE testing at 32A - 8VAC, measurement 0 ... 1Ω Optional: testing current 50A Programmable test ramps Dsdpfx Ajxqxt Iol Sswc Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7", 16 million colors, for programming and display of current tests and results Integrated ARM Dual Core Control & 3D NAND technology for optimal precision, stability, and repeatability Integrated DSP for higher test speeds Large internal memory for storing configurations and test results Fully compliant with IEC 61010-2-034 (Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2: Particular requirements for testing and measuring circuits for insulation resistance and dielectric strength) Shipping is possible upon arrangement. #8312-1

Condition: excellent (used), Year of construction: 1975, For sale - Hardness tester Wolpert Testor HT2001, year of manufacture 1975 Dedpfx Alsx N Rvne Sowc

Condition: used, Year of construction: 1986, pressure 160 t throat 360 mm stroke 500 mm feed down 200 mm/sec feed up 125 mm/sec max. distance table - ram 1000 mm table surface area 900 x 630 mm ram surface 850 x 450 mm clamping pivot 50 H7 / 85 mm Dwodpfx Alov Rgwxe Sec total power requirement 17 kW weight of the machine ca. 7 t dimensions of the machine ca. BxTxH 1,25 x 2,2 x 3,45 m

Condition: ready for operation (used), Facing lathe DP 2000 Dwedev Hx R Nopfx Al Sec Chuck diameter 2000 mm Length 4500 mm 2 tool posts included with the machine Weight approx. 22 tons Video of the machine in operation available!

Condition: used, used, great condition, little usedMake HettichType Blue Max mini PMPneumatic drill feedStorage location 97447 Gerolzhofen, freely loaded, unpackedHandover in the current condition as seen,without guarantee and guarantee Dedevwf Dqjpfx Al Sjwc

Condition: used, Manufacturer: DEMAK Housing size: 6600 x 2100 mm Maximum temperature: 200 °C Dwodpfx Alevgy Ivs Soc In the past, the oven was part of a plant and the product was transported via a conveyor belt, The oven was previously controlled by PLC, it was dismantled,

Condition: used, Shell end mills, shell mills, milling cutters Dedpjc Sr Iksfx Al Sswc -Number: 8 pieces finishing cutter/roughing cutter -Socket: Ø 40 mm -Various diameters: 120-125 mm -Different producers -Price: complete -Weight: 22 kg

Condition: used, Shell end mills, shell mills, milling cutters -Number: 18 pieces finishing cutter/roughing cutter -Socket: Ø 40 mm -Various diameters: 100-125 mm -Different producers -Price: complete Dedsc Sr Imspfx Al Sswc -Weight: 57.6 kg

Condition: used, Shell end mills, shell mills, milling cutters Dsdoc Sr Iqspfx Al Sewc -Number: 12 pieces finishing cutter/roughing cutter -Socket: Ø 32 mm -Various diameters: 75-110 mm -Different producers -Price: complete -Weight: 21.3 kg

Condition: good (used), Thread cutting chuck, thread chuck, tap chuck -Handover in its current condition as inspected Dwedpfx Aec S D H Iol Sec -Thread cutting chuck without collets -with slip clutch -Cutting capacity: M24-M64 -Recording: MK5 -Quantity: 1x threading chuck available -Weight: 13 kg