Used Hitachi Loader for sale (3,942)

Condition: new, maximum load weight: 45,250 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. The following is an excerpt of the equipment. Complete equipment details are available upon request. Ijdpjz Dmn Rsfx Am Dobc Chassis, gooseneck: Special steel frame made of high-strength fine-grained steels, electrically welded at the connection points, well-dimensioned outer frame. 4-axle arrangement. Wheel arches above the axles with spray mist suppression. All steel parts are sandblasted. Lateral impact protection made of anodized aluminum installed. Increased point load of approximately 30,000 kg over approximately 4,000 mm. Special design in the gooseneck area for maximum low-bed length in combination with AluLeg support legs instead of telescopic support winches, maximum rear swivel radius of the tractor unit approximately 2,100 mm. Special superstructure with rear beam widening: DINKEL – special superstructure. Self-supporting aluminum roof beam/profile approximately 120 x 100 mm, sliding cover with plastic flaps. Rear beams can be widened to approximately 4,200 mm (only for loading and unloading). Three sliding beams per side with rubber strap relief. Additional center beam locking mechanisms in the roof beam and parking position, using a pull cable and spring latch. DINKEL – lifting roof mechanically height-adjustable. Lifting roof height approximately 400 mm, operable on both or one side, without opening the opposite side and the doors. Additional height adjustment of approximately 480 mm in approximately 40 mm increments with height adjustment in the beams. Front overhang on the front wall for operation under a tarpaulin up to a total height of approximately 4,400 mm. Four rows of stackable approximately 150 mm aluminum slats on the sides, with 450 mm pockets at the bottom and 4 rows of single pockets above. In the upper bed, only 3 rows of insertable slats. Spacing between slats evenly distributed. Floor: Approximately 27 mm special water-resistant glued beech plywood, rough surface. Steel sheet in the wheel arch area. Forklift drivable according to DIN standard. Outer frame flush with the surface. Brakes: WABCO air brake system with EBS according to EC standard 71/320 EEC including PREV (parking release safety valve). Spring-loaded brake cylinders as parking brake. Wabco Smart Board with odometer and unit load indicator. Includes WABCO tire pressure monitoring system. Axles: 4 x 10,000 kg SAF/Sauer with drum brakes in low-bed design. Air suspension with lifting and lowering device, total lift approximately 230 mm. Third and fourth axles as friction-jointed trailing axles with electrical and mechanical lock. Twin tires: 235/75 R 17.5, -16-ply. Manufacturer of our choice, including E-wheel holder. Without E-wheel. Lighting: according to EC standard including side lights in LED design. Position lights in LED design. 2 additional reversing lights. 2 work lights on the front wall inside, at the top. Painting: Chassis and superstructure in a single color in the RAL color of your choice. Center beams, axles coated with KTL (cathodic electrodeposition) in black. Corner beams in hot-dip galvanized design. Plastic parts in black. Hot-dip galvanized parts unpainted. Rims in factory silver. Special equipment included: - E-supply cable 15-pin - Air suspension in ECAS design, operated on the semi-trailer - Overwidth signage at the front and rear in zinc-plated, continuously telescopic design with attached boundary lights including so

Condition: used, axle configuration: 3 axles, first registration: 01/2024, total length: 13,800 mm, total width: 2,500 mm, suspension: air, tire size: 445/40 R 22.5, Year of construction: 2024, Equipment: ABS, = Additional Options and Accessories = - Lift axle - Air suspension = Further Information = Axle configuration Tire size: 445/40 R 22.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Tire tread depth left: 100%; Tire tread depth right: 100% Rear axle 2: Tire tread depth left: 100%; Tire tread depth right: 100% Ibjdpfxozy R Ehe Am Dec Rear axle 3: Tire tread depth left: 100%; Tire tread depth right: 100% Weights Unladen weight: 6,870 kg Payload: 31,130 kg GVW: 38,000 kg Functional Loading platform height: 110 cm Condition Damage: none

Condition: used, axle configuration: 3 axles, first registration: 01/2024, total length: 13,800 mm, total width: 2,500 mm, suspension: air, tire size: 445/40 R 22.5, wheelbase: 6,560 mm, Year of construction: 2024, Equipment: ABS, = Additional Options and Accessories = - Lift axle - Air suspension = Further Information = Axle configuration Tire size: 445/40 R 22.5 Brakes: Drum brakes Suspension: Air suspension Ibsdpfx Aezy R Euom Dec Rear axle 1: Tire tread depth left: 100%; Tire tread depth right: 100% Rear axle 2: Tire tread depth left: 100%; Tire tread depth right: 100% Rear axle 3: Tire tread depth left: 100%; Tire tread depth right: 100% Weights Unladen weight: 6,870 kg Payload: 31,130 kg GVW: 38,000 kg Functional Loading platform height: 110 cm Condition Damage: none

Condition: used, empty load weight: 2,220 kg, maximum load weight: 6,980 kg, overall weight: 9,200 kg, axle configuration: 1 axle, first registration: 04/2015, suspension: air, tire size: 215/75R17.5, color: blue, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 1 axle, BPW axles, ABS (anti-lock braking system), lowered coupling, twin tires. Isdpfxjzzbglj Am Djbc Superstructure: Lift platform, rear platform extendable. Sold only with the truck MB Atego 1024 L 4x2 -89987- for 27,900 euros net. Total price: 42,800 euros net! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: used, Year of construction: 2006, bar feeder, second-hand manufacturer: IEMCA model: PRA 52/42/F year of construction: 2006 bundle-loading type magazine Please, contact us for getting more information and pictures on mail(at) or Iodpfx Amez A D D To Dsbc subject to sale and mistakes *

Condition: used, Year of construction: 2020, fuel type: gas, Due to the large number of dubious emails, we are unable to respond to all emails. WhatsApp Ijdpoz Edv Iofx Am Dsbc “ERRORS, TYPOGRAPHICAL ERRORS, AND SALES SUBJECT TO CHANGE WITHOUT NOTICE”

Condition: new, maximum load weight: 30,160 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory with immediately and shortly available vehicles on our website. The following is an excerpt of the equipment. Complete equipment available upon request. Frame: Steel welded construction with a front frame bend, front corners chamfered and a chamfer at the rear. Access ramp with excavator bucket recess in the center = a recess at the rear between the longitudinal beams, approx. 2,300 mm long, integrated into the outer frame. - 4 pairs of approx. 4-tonne lashing points - 7 pairs of recessed, retractable approx. 10-tonne lashing rings (2 x on the raised platform, 1 x in the front bend slope, 3 x in the low bed between the wheel wells, and 1 x in the access ramp) - 2 pairs of wheel wells - 1 pair of wheel wells, approx. 2,300/1,270 x 400 mm (L1/L2 x W), in front of the bend, including a one-piece, drive-over aluminum cover, for a maximum surface load of approx. 11,650 daN/piece. - 1 pair of wheel wells, approx. 1,390/590 x 270 mm (L1/L2 x W), between the 3rd and 4th axles, including a one-piece, drive-over aluminum cover, suitable for the transport of wheel loaders with a wheelbase of approx. 2,700-3,600 mm, with wheel diameters of approx. 1,485-1,740 mm, maximum rear overhang of the wheel loader of 2,220 mm. - Width between the wheel wells approx. 1,255 mm (= outer/outer longitudinal beam) Frame attachments: Iodpfsz Ed Azsx Am Dobc - 5 pairs of mounting pockets in the outer frame for rectangular tube supports, approx. 100x50x5 mm (3 x in the low bed and 2 x on the raised platform). - Without rectangular tube supports. - On both sides of the low bed platform, retractable widening extensions with softwood planks approx. 50 mm (the track width of the construction machines to be transported must not exceed the outer frame width of approx. 2,550 mm). - 4 pairs of folding approx. 10-tonne lashing rings, arrangement: 1 pair at the front of the raised platform, inside the longitudinal beams; 1 pair at the very rear in the excavator bucket recess, left and right; 1 pair at the front of the raised platform, in front of the bend, inside the longitudinal beams; 1 pair in the low bed at the rear in front of the access ramp, in the excavator bucket recess, left and right. Towing device: - Fixed drawbar with approx. 50 mm heavy-duty towing eye, bent design, silent block bearing, drawbar locking spring with tensioner. - Truck coupling height from approx. 820 mm to approx. 1,010 mm. - Drawbar length approx. 1,800 mm. Support system: - 2 hydraulic supports at the rear, to be operated individually, control unit housed in a separate stainless steel box. Axles: - SAF air suspension low loader axles with drum brakes, load capacity approx. 11 tonnes/axle, S-cam brake approx. 300/200 mm, automatic brake linkage adjustment. Wheels: - 16 wheels, tires 245/70 R 17.5, 146/146F, manufacturer Conti HTR2 (tire load capacity approx. 12 tonnes/axle). Braking system/suspension: - Braking system according to ECE regulation R13, two-line pneumatic braking system. - Braking system manufacturer Wabco EBS system 4S3M, 1st and 3rd axles sensed, RSS/RSP stability program, spring brake parking brake on 3rd and 4th axles. - Aluminum air reservoirs for a total weight of 44 tonnes. - Brake/air connection lines with 2 individual coupling heads, yellow/red. - EBS/ABS connection cable. - Rubber strap as a holder for EBS and electrical plugs. - Air suspension with lifting and lowering device, to be operated separately at the front and rear. - Automatic adjustmen

Condition: used, Year of construction: 2022, operating hours: 2,487 h, Equipment: all wheel drive, JCB 3CX Compact backhoe loader from the year 2022, including a hydraulic hammer and 3 buckets! ---- * Manufacturer: JCB Iedpfx Asz Ed Dlem Debc * Model: 3CX Compact * Year of manufacture: 2022 * Recorded operating hours: approx. 2,487 * Operating weight: 6,275 kg * Power: 55 kW * Includes hydraulic hammer * Includes 3 buckets * Good condition! * Telescopic arm * Folding bucket * More photos and video available upon request (WhatsApp Erik) * Price: EUR 49,900, net + 19% VAT ---- For further questions, please call: Erik Kortum: WhatsApp All information is provided without guarantee; errors and prior sale are reserved.

Condition: new, maximum load weight: 35,240 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 13,200 mm, total length: 13,200 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer K.SLH S HS 3 / 3H – 18 / 30 Low-bed trailer / 3-axle / hydraulically steered Immediately available, also available with a grating floor. Manufacturer: Kässbohrer * Type: K.SLH S HS 3 / 3H – 18 / 30 * 3-axle low-bed trailer * BPW axles * Air suspension * Drum brakes * 1st, 2nd, and 3rd axles hydraulically steered * Axle liftable * Manual lift axle control * WABCO EBS 2S/2M with ABS and RSS * Tires: 245/70 R17.5 * M+S / 3PMSF tires * Tire pressure monitoring system * WABCO SmartBoard * Electric motor pump for steering * Semi-automatic tracking of the hydraulically steered axles Dimensions / Weights: Overall length: 13,250 mm * Overall width: 2,550 mm * Fifth wheel height: 1,250 mm * Gooseneck length: 3,900 mm * Platform length: 9,300 mm * Platform height: 875 mm * Wheelbase: 8,800 mm * Axle distance: 1,360 mm * Tare weight: approx. 12,760 kg * Technical axle load: 30,000 kg * Fifth wheel load: 18,000 kg * Technical total weight at 80 km/h: 48,000 kg * Technical total weight at 40 km/h: 51,000 kg Wiese Transporttechnick - Dealer Chassis / Loading platform: High-strength S700 MC steel * 45 mm hardwood floor * Steel floor with drop structure over the wheels * Lateral widening * Widening up to 300 mm * 2" kingpin * Mechanical rear supports, load capacity 45 t * Partially metallized chassis * Rear end tapered by 500 mm / 10° Wiese Transporttechnick - Dealer Ramps: Hydraulic, folding ramps * Ramp load capacity: 40 t * Ramp length: 2,750 mm * Ramp width: 850 mm * Hydraulically adjustable * Hardwood surface * Hydraulic gooseneck ramps * Ramp securing via chain tensioners Wiese Transporttechnick - Dealer Load securing / Equipment: Tie-down points: 10 × 10 t / 12 × 8 t / 22 × 5 t * 16 lashing pockets 80 × 80 mm * 4 container locking pockets for 1 × 20 ft * Tool box on the gooseneck, approx. 2,540 × 600 × 460 mm * Central lubrication system * LED rotating beacon * 2 work lights at the rear * Extendable warning boards with LED position lights Iodpfjz Ec Trsx Am Dsbc * Storage box for widening planks * Chassis color: RAL 3020 Traffic Red Other: LED lighting * Aspöck EUROPOINT 3 LED * Spare wheel holder * 12 rims/tires * Widening panels * Extensive heavy-duty / construction machinery equipment Errors, changes and prior sale are subject to change.

Condition: good (used), axle configuration: 2 axles, first registration: 02/1968, color: blue, Year of construction: 1968, Rear axle 1: Double wheels Rear axle 2: Double wheels Empty weight: 7.325 kg Carrying capacity: 24.675 kg GVW: 32.000 kg Technical condition: good Visual appearance: good Please contact Arie or Pedro for more information Ibjdpfoz Dw D Nsx Am Dec Fruehauf / Hydraulic Ramps / 32 Ton

Condition: excellent (used), power: 85 kW (115.57 HP), fuel type: diesel, color: other, lifting height: 3,850 mm, Year of construction: 2018, operating hours: 6,989 h, Equipment: air conditioning, GVW: 9.500 kg Dimensions (LxBxH): 722 x 226 x 311 cm Chassis type: articulated Steering: articulated Engine type: Caterpillar C4.4 ACERT Quick coupler system: Yes CE mark: yes Technical condition: very good Visual appearance: very good = Additional options and accessories = - 3rd hydr. circuit - Blower - Central lubrication - Hydraulic quick coupler - Work lamp(s) = Remarks = Drivetrain Stage / Tier: Stage IV / Tier IV final General Country of production: Engeland Condition CE type: CE Ibjdpfx Asz Dqzzem Dec Hydraulic quick coupler, central lubrication, 20 km/h

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: B/60322, operating hours: 7,011 h, lifting height: 5,000 mm, load center: 600 mm, fuel type: diesel, fork carriage width: 180 mm, fork length: 1,800 mm, empty load weight: 14,820 kg, Equipment: cabin, head guard, The forklift is operational but has not been demonstrated. Ibsdpfx Amsz Hwqzj Djc

Condition: used, axle configuration: > 3 axles, first registration: 01/2019, suspension: steel, Year of construction: 2019, 40-ton low-loader with ramps – extensions – hooks for securing machinery – total weight 40,000 kg – unladen weight 8,200 kg – 1st to 2nd axle = 1,410 mm 2nd to 3rd axle = 4,530 mm 3rd to 4th axle = 1,410 mm = Further Information = Suspension: Leaf spring suspension Front axle 1: Steered Front axle 2: Steered Unladen weight: 8,200 kg Payload: 31,800 kg Gross vehicle weight: 40,000 kg Reference number: 48 Please contact Miguel Cubas for further information. = Company Information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday continuously from 8:30 am to 7:00 pm. Iedpfx Aoz Hy Ehem Debc

Condition: excellent (used), power: 78 kW (106.05 HP), fuel type: diesel, fuel tank capacity: 120 l, color: other, lifting height: 3,350 mm, Year of construction: 2023, operating hours: 1,168 h, Equipment: air conditioning, Number of cylinders: 4 GVW: 5.643 kg Dimensions (LxBxH): 390 x 203 x 211 cm Engine type: Bobcat DM03VA Ibjdpfx Amszbi Sqs Dec Working width: 203 cm Quick coupler system: Yes CE mark: yes Technical condition: very good Visual appearance: very good = Additional options and accessories = - 3rd hydr. circuit - 4th Hydr. circuit - FOPS cabin protection - Forestry protection kit - High Flow - Hydraulic quick coupler - Radio Bluetooth - Rubber tracks - Two Speed - Work lamp(s) = Remarks = Drivetrain Stage / Tier: Stage V / Tier IV final General Country of production: USA Superflow, Hydraulic quick coupler, 2 speed, Large display, Air conditioning, Forestry protection kit (*Without protectional cab door)

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 9,444 h, load capacity: 3,000 kg, lifting height: 4,120 mm, fuel type: diesel, mast type: simplex, construction height: 2,600 mm, fork carriage width: 1,200 mm, fork length: 1,200 mm, empty load weight: 4,900 kg, total length: 1,940 mm, drive type: Diesel, construction width: 2,200 mm, Four-Way Side Loader Load Centre: 600 Fork Width: 150 mm Fork Thickness: 50 mm Mast Type: Standard Condition: Ready for operation and fully functional Technical Condition: Very good Front Tyres Type: Cushion Front Tyres Size: 16x7x10.5 Rear Tyres Type: Superelastic Rear Tyres Size: 23x10-12 Description: In addition to this COMBILIFT model, we currently have approximately 200 heavy-duty forklifts, compact forklifts, counterbalance and side loaders available in our Hamburg and Gdansk warehouses. Visit our website - sago-online. Leasing and financing on favourable terms are always possible. We are also happy to purchase your used machine outright, even if you do not buy a vehicle from us. Our proprietor, Mr Peter Sawitzki, will be pleased to provide you with comprehensive advice on this C3000. P.S.: Our master forklift workshop specialises in repair, maintenance, overhaul and custom builds for forklifts from 8 tonnes upwards. We can also exhibit your vehicle for consignment sale upon request. Isdsz Ewagjpfx Am Dsbc Fork Positioner, Full Cabin, Platform Height: 490 mm

Condition: used, functionality: fully functional, Year of construction: 2001, operating hours: 8,632 h, load capacity: 4,000 kg, lifting height: 6,800 mm, free lift: 2,060 mm, fuel type: gas, mast type: triplex, construction height: 3,280 mm, fork carriage width: 3,100 mm, fork length: 1,150 mm, empty load weight: 6,100 kg, total length: 2,620 mm, drive type: Treibgas, construction width: 2,440 mm, Four-way side loader Load center: 600 mm Fork width: 150 mm Fork thickness: 50 mm Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Very good Front tires type: Superelastic Front tires size: 200/50x10 Rear tires type: Superelastic Rear tires size: 27x10-12 Description: In addition to this Combilift model, we have around 200 heavy duty forklifts, compact forklifts, forklift trucks, and side loaders available at our warehouses in Hamburg and Gdansk. Visit our homepage - sago-online. Leasing and financing on attractive terms are always possible for us. We also gladly purchase your used machines directly, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to provide you with detailed advice on this C4000. P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul, and custom builds for forklifts from 8 tons. We are also happy to offer your vehicle on consignment sale in our facility. Iodpfx Asz Ewamem Djbc Fork positioner, Fork positioner opening range: 660 / 3001 mm; Full free lift, Platform height: 540 mm

Condition: like new (used), functionality: fully functional, Year of construction: 2017, type of input current: three-phase, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, PIPE BENDING MACHINE WITH ERCOLINA MANDREL, MODEL TOP 030, THREE-PHASE, WITH MANDREL + ERCOLINA AUTOMATIC LOADER, MODEL 030 A3 H76 Machine in like-new condition, CE certified Minimum outer diameter: 10 mm Maximum outer diameter: 76 mm Maximum bending radius (CLR): 200 mm Minimum bending radius (CLR): 20 mm Maximum bending angle: 210° Installed power: 4.2 kW Tank capacity: 15 l hydraulic oil Noise level: 65 dB Iodpfxoz Nf Dce Am Djbc Dimensions (Length x Width x Height): 4000 x 950 x 1250 (3 m) Weight: 850 kg (3 m) FEATURES •FST closing system (Patented) with an auxiliary system for stabilizing the hydraulic pressure of the sliding carriage. •Display screen for digital visualization of the carriage’s forward movement (Y1 axis) and rotation (B axis). •External pressure gauges to facilitate system setup and closing pressure adjustment. •Variable bending speed up to 4 rpm. •3-meter mandrel bench. •Pneumatic spindle.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Hydraulically Lowerable Equipment: - Low loading platform - 10 lashing points - Shock absorbers + 100 km/h approved Net: €3,359.66 / Gross: €3,998.00 Article number: UNA114261515.01 Technical data: • Brand: Unsinn • Model: UA 2615-7-13 • Vehicle type: Lowering trailer • Vehicle condition: New • First registration: No first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (L x W x H): 260 x 155 x 15 cm • External dimensions (L x W x H): 403 x 205 x 78 cm • Loading height of the floor: 46 cm • Permissible total weight: 1,400 kg • Unladen weight: 370 kg • Payload: 1,030 kg • Chassis: Low loader (wheels beside the body) • Tires: 195/50R13C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100 km/h approval: Yes DESCRIPTION • Body made of sturdy steel profile, 3-sided, galvanized and powder-coated in black-gray (RAL 7021) • Continuous ramp enables driving onto the platform across the entire width • Attachment points at all corners for e.g. tarpaulin frame • Foldable license plate holder • Sturdy plastic mudguards • 8 foldable lashing points in the side wall profile • 1 lashing point in the end wall profile • 1 lashing ring on the loading platform at the rear, in the center • Reinforced, automatic support wheel for safe parking of the loaded trailer • Made of multi-layer glued screen printing plate, 18 mm, continuous without joints, non-slip and waterproof • Angle of approach in the lowered state approx. 6° • License plate holder at the rear, can be swiveled away for loading • Reversing automatic • 13-pin plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any desired options! Isdezy A I Iopfx Am Dsbc _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Subject to errors, omissions and prior sale -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Hydraulically Lowerable, Motorcycle Ramp Equipment: - V-drawbar - Manual hand pump - Motorcycle ramp Net: €2,159.67 / Gross: €2,570.01 Article number: MAT175241600.11 Technical data: • Brand: Martz • Model: GP ATV • Vehicle type: Lowering trailer • Vehicle condition: New vehicle • First registration: without first registration • TÜV/MOT: 3 years from first registration • Internal dimensions (LxWxH): 246 x 160 x 0 cm • External dimensions (LxWxH): 368 x 215 x 69 cm • Permissible total weight: 750 kg • Unladen weight: 237 kg Ijdezy A Uhjpfx Am Djbc • Payload: 513 kg • Chassis: Low loader (wheels next to the body) • Tires: 155/70R13 • Suspension: KNOTT rubber spring axle • Support wheel: Yes • 100 km/h approval: Yes DESCRIPTION • Multiplex floor panel, made of birch wood, with anti-slip coating - extremely robust • Sturdy and safely designed – perfect for light vehicles (e.g. ATV, scooters, motorcycles) • 3x motorcycle ramp (unmounted) • very stable steel frame • Loading area hydraulically lowerable, license plate holder at the rear, can be folded away for loading • Mechanical safety locking of the pivot axle during operation • With overrun protection at the rear • 4 rows of lashing rails in the floor with plenty of lashing points • Very stable V-drawbar • 13-pin connector • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Support wheel with clamping bracket _____ Accessories can be retrofitted by our specialist workshop! - Please feel free to request any special requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, mistakes and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Hydraulically Lowerable Equipment: - 8 lashing points - V-shaped drawbar - Manual hand pump Net price: €2,000.00 / Gross price: €2,380.00 Article number: F0A175251310.01 Technical data: • Brand: Vezeko • Model: Husky F 08.25/10 • Vehicle type: Lowering trailer • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 3 years from first registration • Internal dimensions (LxWxH): 246 x 127 x 10 cm • External dimensions (LxWxH): 408 x 192 x 70 cm • Loading height of the floor: 47 cm • Permissible total weight: 750 kg • Unladen weight: 300 kg • Payload: 450 kg • Chassis: Low-loader (wheels next to the body) • Tires: 165/70R13 • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • 15mm multiplex floor, made of birch wood, with anti-slip coating - extremely robust • Side walls made of anodized, double-walled aluminum profile 10cm • Attachment options at all corners for, e.g., a tarpaulin frame • Very stable steel frame welded • Frame completely hot-dip galvanized • Many stable cross members, resulting in a high point load capacity • Loading area can be hydraulically lowered, license plate holder at the rear, can be folded away for loading • Mechanical safety locking of the pivoting axle during operation • With an overhanging tip at the rear • Additional longitudinal struts fully welded • Tool box at the front • 8 lashing points inside the V-shaped loading rail, rubber-coated, tensile force (750 DaN/kg) • Coupling head ALKO • Very stable V-shaped drawbar, REINFORCED • 13-pin plug • Reversing light • Large-sized safety lighting • Integrated rear fog light Ibodpozy Dm Sjfx Am Doc • Rear position lights in LED • Lighting recessed in the rear frame • Support wheel mounted _____ Accessories can be retrofitted by our specialist workshop! - Please feel free to request any specific requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or transit license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Subject to errors, omissions and prior sale -

Condition: used, maximum load weight: 35,040 kg, overall weight: 45,500 kg, axle configuration: 3 axles, first registration: 04/2022, next inspection (TÜV): 04/2027, loading space length: 16,270 mm, loading space width: 2,550 mm, loading space height: 855 mm, total length: 16,560 mm, total width: 2,550 mm, total height: 855 mm, Year of construction: 2022, Equipment: ABS, 3-axle low-bed trailer GOLDHOFER Stepstar with TELESCOPIC EXTENSION Iodpfx Amjzz Unce Debc First registration 04/2022, from first owner!! Saddle load up to max. 18,000 kg Permissible total weight (technical) 45,500 kg Length of gooseneck 3,700 mm Length of low-bed 9,300 mm + telescopic extension 3,340 mm = 12,640 mm Loading height 855 mm (-60/ +140 mm) Second loading height 895 mm (-100/+100 mm) Vehicle width 2,550 mm Excavator well length (L x W x H) 3,850 x 760 x 310 mm Wheelbase 2,250 and 1,410 mm 1-piece mechanical aluminum ramps with spring support, load capacity 24,000 kg, length 2,500 mm, width 450 mm Slider design for easy installation and removal of the ramps 1 pair of fixed wheel recesses in front of the first axle, 390 mm deep, incl. climbing strips in the slope 1 pair of fixed wheel recesses between the first and second axles, 390 mm deep, incl. climbing strips in the slope Aluminum wheel recess covers "Premium", full width 600 mm, extendable to 3,000 mm with 8,000 kg axle load Different wheel recess depths by using the wheel recess covers (depth approx. 390 and 260 mm) Angled vehicle rear end 8° over a length of 550 mm Downpipe outlet at the vehicle rear Frame finishing with corrosion-resistant zinc dust primer + cavity sealing BPW axles ECO Max Drum brakes 1st axle LIFT AXLE 3rd axle trailing steering KNORR trailer EBS with RSS driving stability control KNORR trailer information module Lighting completely LED 1 pair of additional reversing lights at the rear Load securing, gooseneck: 3 pairs of lashing rings 5,000 kg 2 pairs of side rail pockets Load securing, low-bed: 1 pair of lashing points 10,000 kg in the center of the loading area behind the gooseneck 1 pair of lashing points 10,000 kg in the center of the rear area 6 pairs of lashing points 10,000 kg in the outer frame 6 pairs of side rail pockets in the outer frame Condition 1A, very well maintained RENTING is the new BUYING; with us, it is also available immediately in a full-service rental agreement.

Condition: used, maximum load weight: 8,680 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 10/2016, next inspection (TÜV): 10/2028, Year of construction: 2016, Internal vehicle number: G400182 Iodpfxjz Amvns Am Dobc Available immediately at our location in Kaufungen. More information can be found at: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: excellent (used), gearing type: automatic, fuel type: diesel, color: other, first registration: 06/2020, Year of construction: 2020, operating hours: 8,268 h, Condition CE type: CE = More information = Technical condition: very good Visual appearance: very good Price: On request Registration number: T-23-DZR = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 Isdpez Avx Sjfx Am Debc EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: new, maximum load weight: 36,500 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website. Excerpt from the equipment Complete equipment available upon request GOOSENECK * Designed in SNT to optimize the loading area length * Length approximately 3,700 mm, with a rear slope of approximately 1,000 mm x 6° For SZM: 4 x 2 and 6 x 2 * ASPÖCK-UNIBOX Grid floor with 5 mm sheet metal reinforcement on the gooseneck and the rear slope * 2-inch kingpin * Guide plate from the gooseneck for the fifth wheel plate, approximately 500 mm wide, round * NATO socket on the connection strip at the front on the gooseneck * 1 pair of pluggable aluminum side panels, approximately 400 mm high, in anodized design * 1 LED work light each on the left and right, mounted at the top of the front wall * Controlled via on/off switch (operation of the work lights from the SZM is not possible in this case) LOADING AREA * Length approximately 9,600 mm, with a rear slope of approximately 900 mm x 6° * Loading area after the gooseneck can be hydraulically raised and lowered, length approximately 3,000 mm * Load capacity up to approximately 9,000 kg on the lifting platform and the loading area, continuous grid floor with approximately 5 mm sheet metal underlay as additional reinforcement, designed for point load TIRES * 235/75 R 17.5 3PMSF, twin tires, manufacturer of our choice * TPMS tire pressure monitoring system in accordance with ECE R 141 AXLES * BPW axles and suspension * 1st and 2nd axles rigid * 3rd axle with trailing steering * 3rd axle with electro-magnetic reverse lock, activated via reverse gear and manually Ibedpfezzhfuex Am Dsc * 1st axle with start-assist * Technical axle load: 12,000 kg each AIR SUSPENSION * with raising and lowering valve HYDRAULIC LOADING RAMPS * 1 pair of two-piece AXS steel ramps with grid floor and a length of approximately 4,920 mm and a width of approximately 900 mm * Hydraulically foldable ramp tips, ramps can be individually moved hydraulically outwards by approximately 235 mm and inwards by approximately 365 mm * Flashing lights on the outer sides of the ramp tips, with a switch next to the ramp control * Ramp securing in driving position by means of a quick-release fastener * Painted sand coating on the outer frame of the ramp as well as on the ramp tip * Mechanical supports in drop tube design on the sides of the ramps to support when docking with loading ramps * Control valves for the hydraulic ramps on the right side of the vehicle BRAKE SYSTEM * From WABCO EBS-E according to EU regulations SURFACE TREATMENT * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure the best corrosion protection PAINTING * Semi-trailer carmine red (RAL 3002) * Rims silver gray, side panels aluminum natural * Wheel hubs according to axle manufacturer, lamp sign pure white (RAL 9010) EQUIPMENT * Front wall made of steel, pluggable, approximately 1,600 mm high * Including connection strip for supply lines to the SZM, mounted approximately 1,000 mm from the lower edge of the outer frame profile * Possibility to attach lashing chains on the inside of the front wall on the left and right * Including aluminum tray underneath on the left and right for storing chains or lashing straps behind the front wall, approximately 12 mm thick DELIGNIT surface, screwed on * 2 pairs of screwable lashing rings additionally (LC 5,000 daN) * Electric winch, approximately 5,400 kg pulling force, with

Condition: excellent (used), power: 55 kW (74.78 HP), fuel type: diesel, fuel tank capacity: 27 l, color: other, lifting height: 4,030 mm, mast type: duplex, Year of construction: 2018, operating hours: 1,622 h, Equipment: air conditioning, Engine capacity: 4.399 cc Empty weight: 5.722 kg Dimensions (LxBxH): 380 x 200 x 210 cm Steering: skid steer Engine type: JCB EcoMAX TCAE-55 Quick coupler system: Yes CE mark: yes Technical condition: very good Isdoz I A Rcjpfx Am Dsbc Visual appearance: very good = Additional options and accessories = - 3rd hydr. circuit - 4th Hydr. circuit - Blower - High Flow - Hydraulic quick coupler - Radio - Rubber tracks - Two Speed - Work lamp(s) = Remarks = Drivetrain Stage / Tier: Stage IV / Tier IV final General Country of production: USA