Used Ima Bima 610 V for sale (38,509)

Year of construction: 2000, operating hours: 3,060 h, condition: used, Transmission: Automatic Kedpfx Afozt I T Nswjna Power: 22 kW (30 HP) Empty weight: 1.200 kg Please contact Emal Jaweed for more information

Year of construction: 1988, condition: ready for operation (used), Travel X/Y/Z: 1500mm/800mm/660mm, spindle speed: 10000rpm, table dimensions X/Y: 1740mm/750mm, tool capacity: 30, taper type: BT50, control: Mazatrol M-32, weight: approx. 11000kg. Knjdotpp H Nepfx Afwsa

Condition: good (used), Tecna Saima D2 pasta sheeting machine with built in mixer. Produces 300mm pasta sheet. Kodpfx Afon Utypowona

Year of construction: 2025, condition: like new (used), It is to be used for a Chemical Vapor Deposition machine but can also be used in other inflammable gas ventilcation. Ksdpfszvh Ewjx Afwsna

Condition: ready for operation (used), Year of construction: 2004, Make: YAMAZAKI MAZAK U.K. LTD Type of machine: VTC-200C Year of manufacture: 2005 Knodpfx Aexk U R Nofwsa Control system: Mazatrol 640 M Machine's weight: 8.260 kg Tool holder: SK 40 x-travel: 1.660 mm y-travel: 510 mm z-travel: 510 mm Speed range: 12.000 U/min Table dimensions: 2.000 × 510 mm Number of tools in the magazine: 24 Plätze

Year of construction: 2022, condition: ready for operation (used), Max. printing width: 1610mm, max. roll weight: 45kg, length: 2775mm, width: 700mm, height: 1392mm, weight: 166kg, with ink supplier Bulk System MBIS3, for the use of paint bags up to two liters, was hardly used. Kodpfxelxpr Ss Afwjna

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 27,875 h, machine/vehicle number: 150204, laser type: CO₂ laser, laser wavelength: 10 nm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser type: CO₂ laser Average power: 200–5,000 W Peak power: up to 6 kW Wavelength: 10.6 µm Beam quality factor M²: < 2.4 (typically 2.1–2.3) Beam divergence: 1.5 mrad (half-angle) Beam diameter at the output: 15 mm (1/e) Beam diameter at the output: 21 mm (full beam) Pulse repetition rate: 0–2 kHz Pulse width: 250 µs Pulse resolution: 70 µs (?) Alignment stability: ± 150 µrad (?) Wavelength: 635 nm Output power: < 1 mW MACHINE DETAILS Ambient temperature: 10–40 °C Relative humidity: < 95% (non-condensing) Ksdpfjzncm Hsx Afwena Connected power: 37 kW Voltage: 400–460 V AC Voltage tolerance: ± 10 % Power connection: 3-phase Required cooling capacity: 45 kW Flow rate: 133 l/min Inlet temperature: 18–20 °C Maximum inlet pressure: 6 bar Nominal inlet pressure: 3 bar Differential pressure: 1.5 bar Cooling medium: Distilled water with 35 % Dowfrost HD Filter fineness: 100 µm Helium purity: 99.996 % Helium proportion: 67.7 % Helium consumption: 13.4–46.8 SLPH Carbon monoxide purity: 99.995 % Carbon monoxide proportion: 4.1 % Carbon monoxide consumption: 0.9–3.0 SLPH Nitrogen purity: 99.996 % Nitrogen proportion: 28.2 % Nitrogen consumption: 5.8–20.2 SLPH Total gas consumption: 20–70 SLPH Maximum proportion of water vapor, hydrocarbons, and oxygen: < 10 ppm Compressed air: dry Compressed air dew point: < 2 °C Operating hours (according to meter): 27,875 h

Year of construction: 2007, condition: good (used), functionality: fully functional, Printing and Coating • 5 letterpress printing units • 1 additional varnishing unit • UV drying system • Inline varnishing capability • Suitable for high-quality label and packaging applications • Precise reproduction of fine text, barcodes, screens and detailed graphics Web Handling Kodeztqlzspfx Afwona • Unwinding unit • Rewinding unit • Automatic web-guiding system • Corona treatment system • Stable and controlled web transport throughout the complete production process Laminating and Converting • Inline laminating unit • Suitable for the production of laminated and multilayer labels • Laminating section can be used independently • Separate operation possible together with one printing unit • Machine can therefore also be used as a dedicated converting and finishing line Die-Cutting and Finishing • Semi-rotary die-cutting unit • Slitting unit • Perforation unit • Inline converting and finishing capability • Flexible processing of different label formats and repeat lengths Quality Control • Camera inspection system • Continuous monitoring of print quality and web registration • Improved production control • Reduction of production waste and defective material _____ WHY THIS VIVA CODIMAG 340? • High-Quality Letterpress Printing The letterpress printing process provides sharp text, clean lines, strong color coverage and precise reproduction of small details. This makes the machine especially suitable for self-adhesive labels, pharmaceutical labels, cosmetic labels, food labels, barcode applications and other demanding narrow-web products. • Five Printing Units Plus Varnishing The machine is equipped with five letterpress printing units and one separate varnishing unit. This configuration allows multi-color labels to be printed and subsequently protected or visually enhanced with a varnish in one continuous production process. • Independent Converting Capability One of the most important advantages of this machine is the flexible configuration of the laminating and converting section. This section can be operated separately together with one printing unit, allowing the machine to be used as a dedicated converting line for: • Laminating • Varnishing • Die-cutting • Slitting • Perforating • Rewinding This provides additional production capacity even when the complete printing section is not required. • Inline Laminating Unit The integrated laminating unit enables the production of protected, multilayer or enhanced label products. Laminating increases the durability of the finished label and can improve resistance against moisture, chemicals, abrasion and mechanical stress. • Semi-Rotary Die-Cutting The semi-rotary die-cutting unit provides flexibility for different label formats and repeat lengths. It is particularly suitable for short and medium production runs where frequent job changes and flexible format handling are important. • Complete Inline Production Printing, varnishing, laminating, die-cutting, perforating, slitting and rewinding can be completed within one production line. This reduces material handling, minimizes intermediate production stages and improves overall production efficiency. • UV Drying Technology The UV drying system enables immediate curing of inks and varnishes. This supports high-quality production, stable print results and direct further processing of the printed material within the machine.

Condition: ready for operation (used), Year of construction: 2005, Make: YAMAZAKI MAZAK U.K. LTD Type of machine: VTC-200C Year of manufacture: 2005 Control system: Mazatrol 640 M Machine's weight: 8.260 kg Tool holder: SK 40 x-travel: 1.660 mm y-travel: 510 mm z-travel: 510 mm Speed range: 12.000 U/min Ksdpfx Ajzru Rfofwsna Table dimensions: 2.000 × 510 mm Number of tools in the magazine: 24 Plätze

Condition: as good as new (ex-display), Year of construction: 2026, Low-noise and low-speed model WL 4/18.5 kW Technical data: Knjdpjbtnftefx Afwsa Hopper opening: 600 x 800 mm Hopper opening with log spacer: 600 x 1050 mm Hopper capacity: approx. 0.6 m³ Working width of the rotor: 600 mm Diameter of the rotor: 252 mm Number of knives: 28 pieces Knives: 40 x 40 mm, concave Screen perforation: 15/20 mm Included: Control cabinet Electrical control system Star-delta starter Rubber vibration dampers 2nd knife row Log spacer (self-cleaning hopper) Top-of-the-line equipment Location: In stock in Bitburg - immediately available - at a special price.

Condition: as good as new (ex-display), Year of construction: 2026, Low-noise and slow-speed model WL 4/18.5 kW Technical data: Hopper opening: 600 x 800 mm Hopper opening with log spacer: 600 x 1050 mm Hopper capacity: approx. 0.6 m³ Working width of the rotor: 600 mm Diameter of the rotor: 252 mm Number of knives: 28 pieces Knives: 40 x 40 mm, concave Screen hole size: 15/20 mm Included: Control cabinet Electrical control system Star-delta starter Rubber vibration dampers 2nd knife row Log spacer (free-cutting hopper) Knsdpfebunq Hox Afwja Location: 54634 Bitburg Available immediately

Condition: new, Year of construction: 2026, Exceptional special price, as it was used at our in-house trade fair. Operating hours: 2 Immediately available – subject to prior sale. Knedpelht H Eofx Afwsa First come, first served. Compact design, high reliability, and excellent value for money: these are the advantages of this machine, which is perfectly suited for briquetting materials such as wood, polystyrene, foams, or paper. A special feature is the screw pre-compaction, which guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. Overall dimensions: 1900 x 1410 mm Hopper opening: 1044x1044 mm Hopper height: 1010 mm Hopper volume: 1.1 m³ Drive power: 4 kW Briquette diameter (mm): 40 Throughput (kg/h): 30-40 Hydraulic oil volume (l): 100 Weight (kg): 530 Equipment: Press Powerful pressing mechanism with wear-resistant, chrome-plated jaws Pre-compactor with end-position dampened cylinder and bolted cover Switchgear with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Tank with agitator and gear motor Screw channel with discharge screw and gear motor Accessories: Briquette length monitoring Automatic on/off Location: 54634 Bitburg

Condition: new, Year of construction: 2026, Weima Single-Rotor Shredder Type WL 6 Power: 18.5 kW Our WL 6 machine concept The Weima high-performance shredders, with their flexible application possibilities, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer remnants, etc.) into fuel chips, and achieve an enormous volume reduction of the material, especially with bulky materials. Knjdoh Eiw Ispfx Afwoa Mode of operation: The machine is equipped with a large feed hopper and can be fed either by a conveyor belt or manually. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without the need for manual assistance. Technical specifications WL 6 / 18.5 kW Hopper opening: 800 x 1,000 mm Hopper volume: 0.9 m³ Working width of the rotor: 800 mm Diameter of the rotor: 252 mm Drive power: 18.5 kW Rotor speed: 80 - 120 rpm Number of knives: 42 pieces Type and size of knives: concave / 40 x 40 mm, cutting reversible crowns Screen perforation: 10-60 mm possible (standard 15-20 mm) Paint: WEIMA standard RAL 2002 / 7016 Connection value: 400 V +/- 5% / 50 Hz Weight: approx. 1,600 kg Included: - Control cabinet (Rittal) including electrical control (Moeller / Siemens) and star-delta starter - Rubber vibration dampers - V-rotor (patented) with knife pockets milled into the profile - Gearbox limit switch - Pressure bar - Very robust Weima WAP gearbox - Logspacer (self-clearing hopper) - 2nd knife row Available from stock in 54634 Bitburg - immediately available - Request more information

Condition: new, Year of construction: 2026, Weima Single-Rotor Shredder Type WL 6 Power: 18.5 kW Our WL 6 Machine Concept The Weima high-performance shredders, with their flexible application options, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer remnants, etc.) into fuel chips, achieving an enormous volume reduction of the material, especially with bulky materials. Operating principle: The machine is equipped with a large feed hopper and can be fed by means of a conveyor belt or manually. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without the need for manual assistance. Technical Specifications WL 6 / 18.5 kW Hopper opening: 800 x 1,000 mm Hopper capacity: 0.9 m³ Working width of the rotor: 800 mm Diameter of the rotor: 252 mm Drive power: 18.5 kW Rotor speed: 80 - 120 rpm Number of knives: 42 pieces Type and size of knives: concave / 40 x 40 mm, cutting reversible edges Screen size: 10-60 mm possible (standard 15-20 mm) Paint: WEIMA standard RAL 2002 / 7016 Connection value: 400 V +/- 5% / 50 Hz Weight: approx. 1,600 kg Included: - Control cabinet (Rittal) incl. electrical control (Moeller / Siemens) and star-delta starter - Rubber vibration dampers - V-rotor (patented) with knife pockets milled into the profile - Gearbox end switch - Pressing bar - Very robust Weima WAP gearbox - Log spacer (self-cleaning hopper) - 2nd knife row Available from stock in 54634 Bitburg - immediately available - Kodpfsh Hnp Dsx Afwjna

Condition: like new (used), Year of construction: 2026, operating hours: 1 h, Super special price, as it was on display at our in-house exhibition. Operating hours: 1 Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Knodpfx Astnz Ttsfwsa Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg

Condition: new, Year of construction: 2026, Your advantages Stable pressing mechanism with a wear-resistant, chrome-plated die Press chamber wear bushing Pre-compressor with end-position damping cylinder and screwed-on cover Control panel with PLC control Screw channel with discharge screw Separate oil tank with pump motor and valve control Safety switch for oil temperature Mounting on a stable base frame with rubber feet Briquette length monitoring Robust design, low-maintenance technology, small footprint: The machines in the C-series are particularly suitable for small and medium-sized businesses whose required throughput of 50-80 kg/h or 200 to 400 kg/day is not exceeded. Virtually any suitable material can be briquetted, such as wood, styrofoam, foam, paper, or biomass. All machines are available in left-hand or right-hand versions. Mounting on a stable base frame ensures quick installation and enables mobile use. Briquette diameter (mm) 50 Throughput up to (kg/h) 50 (material-dependent) Hydraulic motor (kW) 5.5 Screw motor (kW) 0.55 Oil volume (liters) 100 Weight (kg approx.) 800 Outstanding features at a glance Knjdpfx Ascnz U Esfwea Hydraulics with separate oil tank: Temperature-monitored hydraulic unit, complete valve control, pump motor for long operating times Briquette length monitoring: Regulates the length of the briquette to a uniform size Press chamber wear bushing: Prevents wear in the press area Location: Ex works - free loading

Condition: new, Year of construction: 2026, Weima Single-Rotor Shredder, Type WL 6 Power: 18.5 kW Our WL 6 machine concept: The Weima high-performance shredders, with their flexible application options, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF, plywood, veneer remnants, etc.) into fuel chips, achieving a significant volume reduction of the material, especially with bulky materials. Mode of operation: The machine is equipped with a large feed hopper and can be fed via a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without the need for manual assistance. Technical Specifications WL 6 / 18.5 kW Hopper opening: 800 x 1,000 mm Hopper capacity: 0.9 m³ Working width of the rotor: 800 mm Diameter of the rotor: 252 mm Drive power: 18.5 kW Rotor speed: 80 - 120 RPM Number of knives: 42 pieces Type and size of knives: concave / 40 x 40 mm, cutting reversible edges Screen size: 10-60 mm possible (standard 15-20 mm) Paint finish: WEIMA standard RAL 2002 / 7016 Connection value: 400 V +/- 5% / 50 Hz Weight: approx. 1,600 kg Kedpfxjcbtpkj Afwona Included: - Control cabinet (Rittal) incl. electrical control (Moeller / Siemens) - Star-delta starter - Rubber vibration dampers - V-rotor (patented) with knife pockets milled into the profile - Gearbox limit switch - Presser bar - Very robust Weima WAP gearbox Recommended accessories - Log spacer (free-cutting hopper) - 2nd knife row Available from stock in 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Compact design, high reliability, and excellent value for money: these are the advantages of this machine, which is perfectly suited for briquetting materials such as wood, polystyrene, foams, or paper. A special feature is the screw pre-compaction, which guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm): 40 Throughput (kg/h): 30-40 Hydraulic oil capacity (l): 100 Weight (kg): 530 Equipment: Press Powerful pressing mechanism with wear-resistant, chrome-plated clamp Pre-compactor with end-position dampened cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Knsdpfx Afobtnf Eswsa Container with agitator and gear motor Screw channel with discharge screw and gear motor Accessories: Briquette length monitoring Automatic on/off Location: 54634 Bitburg

Condition: used, Year of construction: 2001, machine/vehicle number: 20010329, Offer 17500 Knsdev Eak Ispfx Afwja Technical data approx.: - Nominal power approx. 100 kVA - Projection approx. 350 mm - Arm distance approx. 200 mm - Arm diameter approx. 50 mm - Double stroke cylinder type X - Z force at 10 bar approx. 2400 daN - Working stroke approx. 20 mm - Arm distance approx. 200 mm - Separate control cabinet HARMS + WENDE - Total weight approx. 250 kg

Condition: good (used), Year of construction: 2020, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer, transformer, auto-transformer -Manufacturer: Wuxi Madis, single-phase transformer type JBK3-1000VA -Power: 1000 VA -Technical data: see photo type plate -Dimensions: 150/150/H150 mm Ksdpfx Afsxnxt Njwona -Weight: 12.3 kg

Condition: good (used), Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, heavy-duty trailer, industrial heavy-duty trailer -Manufacturer: AWI Maschinenbau, heavy-duty transport wagon with 1-axle turntable steering -Type: PDV 3.0 To 1.8x7.5 m -Platform: 7615/1800/H1000 mm -maximum weight allowed: 3 t -Tires: Solid rubber tires 415/100-305 Kedpfxsyhaxnj Afwena -Overall dimensions: 9135/1860/H1000 mm -Transport dimensions: 7615/1860/H1000 mm -Weight: 860 kg

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Imav, hydraulic cylinder with control valve, stroke 950 mm -Valve: type DBV-USY-10 -Piston rod: Ø 40 mm -Mounting hole: Ø25 x 24 mm / Ø20 x 25 mm Ksdpogv Di Ijfx Afwena -Cylinder: outside Ø 60 mm -Dimensions: 1290/180 / H170 mm -Weight: 32.6 kg

Condition: used, Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, control panel Knjdpfx Ajdpar Isfwsa -Type no.: 4205 1021/1 -Display range: 0 V - 40 V -Installation dimensions: LxWxD approx. 140x140x90 mm -Dimensions: 144/144/H90 mm -Weight: 1.2 kg

Condition: new, I am offering for sale an original Siemens SIMATIC Mobile Panel 277 10" operator panel, catalog number 6AV6645-0BE02-0AX0. The device is new, unused, and comes from stock. It is in its original packaging. The screen is protected by the factory protective film. The set also includes the original manufacturer's documentation. Technical specifications: Kedpfxezru I Ds Afwsna • Manufacturer: Siemens • Series: SIMATIC Mobile Panel • Model: Mobile Panel 277 10" • Catalog number (MPN): 6AV6645-0BE02-0AX0 • Type: HMI operator panel • Touch screen: 10" • Year of manufacture: 2013 • Country of manufacture: Austria (Made in Austria) The set includes: • Siemens SIMATIC Mobile Panel 277 10" • Original packaging • Manufacturer's documentation

Condition: excellent (used), Vötsch VC 4060 Climate Testing Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: VC 4060 Machine Type: Climate Testing Chamber / Temperature Testing Chamber Test Chamber Volume: approx. 600 liters Knodpfx Aszf E E Tsfwsa Control System: S!MCON / 32 Cooling: water-cooled Refrigerant: R452A For sale is a used climate testing chamber from Vötsch. The testing chamber is suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical Data Test Chamber Dimensions: approx. 800 x 800 x 950 mm (W x D x H) Housing Dimensions: approx. 1090 x 1960 x 1995 mm (W x D x H) Weight: approx. 600 kg net Temperature Range: -40 °C to +180 °C Temperature Change Rate (Heating): approx. 4.0 K/min Temperature Change Rate (Cooling): approx. 3.0 K/min Temperature Deviation (Time): ±0.1 to ±0.5 K Temperature Deviation (Spatial): ±0.5 to ±2 K Temperature Gradient: approx. 1 to 4 K Climate Range (Temperature): -10 °C to +95 °C Humidity Range: 10 % to 98 % RH Humidity Deviation: ±0.1 to ±3 % RH Temperature Deviation (Climate Operation, Time): ±0.1 to ±0.3 K Temperature Deviation (Climate Operation, Spatial): ±0.5 to ±1.0 K Temperature Gradient (Climate Operation): approx. 1 to 2 K Power Connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated Power: 7.8 kW Rated Current: 15.0 A Fuse: 16 A slow-blow, on-site 1 cable entry Ø 50 mm installed on the left 1 cable entry Ø 125 mm installed on the right Test chamber made of stainless steel Touch panel operation Equipment S!MCON / 32 control system Touch panel operation Interior made of stainless steel Test chamber lighting Side cable entries Ø 50 mm and Ø 125 mm Shelving / test chamber equipment as shown in the pictures Water-cooled system Documentation / operating manual Accessories as shown in the pictures Application Areas Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Scope of Supply 1x Vötsch VC 4060 Climate Testing Chamber Documentation / operating manual Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures Inspection possible by appointment Note: The unit has been converted to use R452A refrigerant. Scope of supply as pictured. Subject to changes and errors in the technical data, as well as prior sale.