Used Janus Vmc-1600 for sale (2,668)

Condition: good (used), Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, forklift forks -Forklift tines: 2 pieces/1 pair -Length: 1600 mm -Cross-section: 100 x 40 mm Kedpfx Ajyzxalol Nslu -Reception: 400 mm (see sketch in the photos) -Transport dimensions: 1750/590/H110 mm -Weight: 118 kg

Condition: used, Electric Forklift Truck JUNGHEINRICH type EFG 216 Serial no.: FN413671 Year of manufacture: 2011 Load capacity: 1600 kg Lifting height: 4800 mm Fork length: 1220 mm Fork carriage width: 980 mm Overall height: 2120 mm Operating voltage: 48 volts - Triplex mast with full free lift 1550 mm - Hydraulic side shift - 2 driving speeds - Battery from 2015, type 06 EPZS C750 SC (48 volts, 750 Ah) - Automatic charger, 48 volts - 3-wheel solid rubber tyres, front 18 x 7-8, rear 140/55-9 - According to hour meter: 14,725 operating hours - Power steering - Front working lights - New TÜV UVV inspection (surcharge EUR 150 net) Length without forks: 2000 mm Kledjinwzhopfx Al Nju Total width: 1080 mm Own weight without battery: 2390 kg Own weight with battery: 3480 kg

Condition: used, LPG forklift truck, gas-powered forklift STILL type RX 70-16T Serial no.: 517314G00021 Year of manufacture: 2016 Rated capacity: 1600 kg Lift height: 4920 mm Fork length: 1000 mm Fork carriage width: 980 mm Overall height: 2160 mm Overall width: 1100 mm Overall length without forks: 2200 mm Unladen weight: 3040 kg - Triplex mast with full free lift 1550 mm - Hydraulic sideshift - LPG-electric drive - 4-cylinder Volkswagen LPG engine with 30 kW Kledpfx Asinldwol Nsu - Hydraulic power steering - Front working lights - Reversing warning light (blue) - Rear flashing warning light (yellow) - 4-wheel superelastic, solid rubber tyres, front 18X7-8 SE / rear 18X7-8 SE - Battery charger for the starter battery, VICTRON maintenance charger - New TÜV safety inspection UVV (surcharge 150,-- EUR net) Good condition

Condition: excellent (used), Year of construction: 2006, number of straightening rollers: 19, straightening roller diameter: 55 mm, working width: 1,600 mm, strip width: max. 1.600 mm strip thickness: 0,4 - 3 mm design: 6 hi/cassette No. of levelling rolls: 19 levelling roll Ø: 55 mm Kljdpfsy Nxv Njx Al Nju intermediate roll Ø: 30 mm

Condition: good (used), Heat exchanger, cooling coil, cooling pipe, cooling spiral, shell and tube heat exchanger, oil cooler Kedpfxsyzn Dtj Al Nolu -Heat exchanger: Oil cooler, shell and tube heat exchanger -Connections/Dimensions: see photos -Dimensions: 1005/1600/H110 mm -Weight: 13.5 kg

Condition: ready for operation (used), Year of construction: 2004, stroke length: 200 mm, Mechanical stamping press manufactured in 2004. This AIDA NC2-1600(2) features a pressing force of 160 tons and a slide stroke of 200 mm. It has a slide area of 1500 x 580 mm and a bolster area of 2040 x 760 mm. If you are looking to get high-quality stamping capabilities, consider the AIDA NC2-1600(2) machine we have for sale. Contact us for further details. • Strokes per minute: 30–55 spm Kodpjy Ex R Eofx Al Nslu • Die height: 450 mm • Slide adjustment: 100 mm • Slide area: 1500 x 580 mm • Bolster area: 2040 x 760 mm • Main motor: 15 kW Technical Specification Stamping Force 1600 Kn

Condition: good (used), Year of construction: 2013, clamping force: 16,000 kN, Equipment: documentation/manual, Clamping force: 1600 t Screw diameter: 135 mm Distance between tie bars V: 1420 mm Distance between tie bars H: 1870 mm Kljdpfeyh I Emex Al Nju Shot volume: 9662 cm3 Type: Horizontal Drive: Hydraulic

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, number of injections: 2, Here we offer, as a dealer in injection moulding machines, the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been a wholesaler of injection moulding machines for over 25 years. Manufacturer: Arburg Model: 520S 1600 290/70 – 2-component machine Year of manufacture: 2009, from first German owner - Total cycles: 12.3 million - Manual operation: 86,565 hours - Automatic operation: 78,099 hours Injection units (2K) Injection unit 1 – horizontal - 290 Kjdoyzumzopfx Al Nelu - Screw diameter: 25 mm - Shot volume: 71 cm³ Injection unit 2 – vertical - 70 - Screw diameter: 18 mm - Shot volume: 21 cm³ Clamping unit Mounting platens: 695 x 695 mm - Maximum platen distance: 925 mm - Opening stroke: 675 mm - Minimum mould height: 250 mm - Electric index rotation: present Extras Hot runner / additional axes - 12-zone hot runner integrated - 3x core pulls - 2x blow-out functions → incl. actuation for needle shut-off - Various customer-specific inputs and outputs Interfaces / Communication - ALS - Connection for temperature control units - Connection for dryers Handling / Multilift H (6 kg) - 2x vacuum circuits - 5x double-acting gripper functions - Z-axis servo-driven, 800 mm stroke - C, G, X, and B axes pneumatically actuated - Various customer-specific inputs and outputs → incl. gripper monitoring Complete maintenance log for the past 3 years - Both injection units re-sealed by Arburg - Clamping unit completely re-sealed by Arburg - Accumulator bottles replaced by Arburg in 2020 Warranty Warranty valid until initial commissioning Loading/shipping Free loading onto buyer’s truck or free delivery (CPT) for reimbursement of freight costs Worldwide delivery Available ex stock in Hannover, Germany Information about our offered machines and company: - We only sell machines that we have purchased from active production, available from our warehouse in Hannover - All offered machines are inspected and tested before dismantling - We do NOT sell insolvency goods; we are NOT intermediaries dealing with third-party assets - All machines offered originate from successful companies where regular maintenance and care are a matter of course - All offered machines can be inspected at our warehouse

Condition: excellent (used), Year of construction: 1999, Used Large Format Trumpf 500r 1600 throat Cnc Punch Press For Sale TRUMPF TRUMATIC T500R Large format rotation cnc punch press for sale This machine will process 3metre x 1.5metre sheet without a reposition. Trumpf uk specification: Brand: TRUMPF Model: TRUMATIC 500R Type: CNC Punching Machine Control: Bosch CC220 Punching force (ton)22 Kodpfx Alstltl Ho Nolu Capable of taking multi tool Trumpf TC 500R Turret Punch 3000 X 1500mm large format machine 1600 throat x 3metre rail. TRUMPF TRUMATIC 500 CNC PUNCH WITH CONTROL & AIR TABLE CAPACITY: 220KN SERIAL YEAR: 1999

Condition: new, Year of construction: 2025, Ref. -No.: 10457 Kedexmd Snspfx Al Njlu Manufacturer: IGREK Type: VMC 1160 Year of construction: 2025 Type of control: CNC-Steuerung Control: SIEMENS SINUMERIK 828D Storage location: Istanbul Country of origin: Türkiye X-Travel: 1160 mm Y-Travel: 610 mm Z-Travel: 600 mm Main spindle drive power: 9 kW Spindle Taper: HSK Tool Piece Magazine With: 24 Pcs./pcs. Spindle Speed: 10000 RPM Rapid Traverse X-Axis: 40 m / min Rapid Travel Y-Axis: 40 m / min Rapid Traverse Z-Axis: 40 m / min Machine length: 3500 mm Machine width: 2900 mm Machine Height: 2500 mm Weight Of The Machine Ca.: 8 t Further information: This is a new storage machine with 0 operating and spindle hours. The machine is available immediately and can be ordered with Siemens or Heidenhain controls. Optional installation and servicing of the machines can be offered.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 10,631 h, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 410, total height: 2,700 mm, table load: 500 kg, overall weight: 4,200 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 13,000 W, tool weight: 7,000 g, number of axes: 3, This 3-axis Bridgeport VMC 1000 22 was manufactured in 2001. It features a working area X travel of 1020 mm, Y travel of 610 mm, and Z travel of 610 mm. The machine includes a robust table size of 1150 x 580 mm with a maximum table load of 500 kg. If you are looking to get high-quality machining capabilities, consider the Bridgeport VMC 1000 22 vertical machining centre we have for sale. Contact us for further details. • Table: 1150 x 580 mm; T-slots 5x; T-slot size 18 mm • Spindle torque up to 110 Nm • Tooling: holder SK 40 DIN 69871; tool changer 22 stations (optional 30); max tool Ø 75 mm; max tool length 250 mm; tool change time approx. 5.2 s • Axis speeds: rapid X/Y 40,000 mm/min; rapid Z 30,000 mm/min; feed 1–12,000 mm/min; acceleration 6 m/s² • Accuracy: positioning ±0.005 mm; repeatability ±0.002 mm • Coolant system: tank capacity 450 l; pump capacity 70 / 140 l/min • Electrical: 400 V, 3-phase, 50 Hz; full load current 30 A; fuse protection 63 A; connected load approx. 20 kVA Klsdey D N Aijpfx Al Nju • Pneumatics: compressed air 6 bar; consumption approx. 80 l/min • Machine size/weight: dimensions 2830 x 2360 mm; transport with Chip conveyor weight approx. 4700 kg • Spindle operating time: 10,631 h Additional equipment • Chip conveyor (included) Technical Specification Taper Size SK 40

Condition: like new (used), Year of construction: 2023, clamping force: 1,700 kN, Clamping force: 1700 t (increased) Screw diameter: 105 mm Distance between tie bars V: 1420 mm Distance between tie bars H: 1870 mm Shot volume: 3721 cm3 Type: Horizontal Drive: Hydraulic Kjdpfxey Uk Eme Al Nslu KUKA ROBOT 6 axes Machine like new!

Condition: used, Year of construction: 2019, chuck diameter 500 mm swing diameter over bed slide 700 mm control Siemens travel -x axis 630 mm travel -z axis 500 mm CNC turning and milling center vertical | EMAG - VMC 450 MT The machine is in very good condition. Please note that the technical details were added from comparable machines. Kodpsx Szlrjfx Al Njlu - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VMC450MT | VMC 450MT | VMC-450 | VMC-450MT

Condition: excellent (used), For sale: Julabo FC1600 laboratory chiller with a circulating pump (closed-loop system). Included is a copper spiral immersion probe (ideal for cooling tanks, fermentation, distillation, etc.). The equipment is in working order, and its condition can be seen in the photos. Temperature range: -20..+80°C Stability: +/-0.2°C Cooling capacity: approx. 1.6 kW Heater power: 1.2 kW Pump flow rate: 20 l/min, 0.5 bar Kedpfxszb Ixcs Al Nolu System volume: 8-11 l Power supply: 230V

Condition: ready for operation (used), operating hours: 6,512 h, functionality: fully functional, mileage: 44,264 km, power: 55 kW (74.78 HP), first registration: 04/2016, overall weight: 3,500 kg, fuel type: diesel, color: traffic orange, axle configuration: 4x4, maximum load weight: 1,500 kg, empty load weight: 2,000 kg, next inspection (TÜV): 05/2026, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, Equipment: additional headlights, air conditioning, all wheel drive, hydraulics, soot filter, Hako Sweeper Citymaster 1600 from 1st Owner Former municipal / authority vehicle 3-Broom Sweeping System Portal arm with weed control function Registered as a self-propelled work machine (40 km/h) Major engine inspection including timing belt, water pump, oil, and filters will be performed upon sale 6,512 total operating hours 3,767 sweeping operating hours 44,264 kilometers 4x4 all-wheel drive – hydrostatic all-wheel drive system Waste container made of stainless steel Wheelbase: 1,600 mm Track width: 1,055 mm Fresh water tank: 180 liters Unladen weight approx. 1,900 kg Permitted total weight: 3,500 kg Length: 4,510 mm / Width: 1,210 mm / Height: 1,970 mm Travel speed: 0–40 km/h Working speed: 0–24 km/h Noise insulation package Engine: Water-cooled 4-cylinder VW industrial diesel engine Fuel tank approx. 60 liters Hydrostatic all-wheel drive 2-circuit high-pressure hydraulics - Circuit 1 (front): 0–50/0–70 l/min at 225 bar - Circuit 2 (rear): 0–20/25/30 l/min at 195 bar Hydraulic service brake operated via foot pedal Cab with air-suspended driver’s seat Air conditioning / heating Water treatment system Hydrant connection Dosing system Permitted total weight: 3,500 kg Unladen weight: 1,950 kg Other applications possible with additional HAKO attachments such as sweeper brushes, snow plough, and lawn mower (not included in delivery) Subject to errors, changes, and prior sale Kodpfx Aleyf Hihj Nolu We sell exclusively under our General Terms and Conditions and exclude any form of warranty. Errors, changes, and prior sale reserved. We are available Monday to Friday from 9:00 am to 5:00 pm. Saturdays by appointment; outside these hours, appointments can be arranged by phone. We are happy to accept your current used machine/vehicle in part exchange. Sales to commercial customers and exporters are preferred; this applies to our entire vehicle inventory. The details provided above are non-binding; errors, changes, and prior sale subject to reservation.

Condition: good (used), Pallet wrapper, strapping machine, packaging machine, strapping machine, skinpack machine, stretch wrapping machine, stretch film machine, wrapping roll, roll carrier for cardboard roll -Roll carrier: winding roll for packaging machine -Roll: Ø 148 x 1600 mm -Drive shaft/mount: Dimensions see photos Kodpfxoxmi H Re Al Nolu -Dimensions: Ø 148 x 1870 mm -Weight: 38 kg

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, total length: 600 mm, total height: 780 mm, total width: 1,600 mm, Work Table AT 1600 with Stainless Steel Top Premium gastronomic/bakery work table Stainless steel worktop with rear upstand (gallery) Lower storage shelf Approx. dimensions: 1600 x 600 x 780 mm (W x D x H) Used unit, cleaned Kledpfx Ajyhy Nkel Nju Option: Delivery service New castors / wheels Come visit us!

Condition: good (used), Year of construction: 2012, PALLET NAILING DOUBLE TABLE, brand LISOAZ (made in Portugal), model DUPLA MMD 1600, year 2012 Pallets up to 1600 mm x 1200 mm Motorized lateral flipping mechanism for nailing the opposite face Motorized frontal flipping mechanism for placing the pallet on the stacking line Quick-release outlets for nail guns Machine ready to work Kedpfxezcqcys Al Nolu

Condition: used, Year of construction: 2008, functionality: fully functional, ABB Robotics IRB 1600 8/1.45 IRC5 M2004 Robot, complete Klsdpfxey Rkuts Al Neu Controller: IRC5 M2004 Number of axes: 6 Max. payload: 8 kg Max. working range: 1450 mm Year of manufacture: 2008 Scope of delivery: robot, controller, cables, teach pendant, circuit diagrams Spare parts are continuously available from stock. The robot is fully operational and can be inspected at any time. 2 weeks commissioning warranty. No further warranty.

Condition: like new (used), High-Quality Meltblown Production Line for Nonwovens A complete machine inspection was carried out by the manufacturer's service team on 17.12.2025. Inspection report available. Commissioning at the customer's site can be offered upon request. Operating hours: 80 hours (commissioning only) Kljdpfxex Hx Rns Al Neu Price for a new machine: EUR 7,500,000 • Manufacturer: Reifenhäuser GmbH & Co. KG Maschinenfabrik • Model: Reicofil MB 1600 • Year of manufacture: 2021 • Last commissioning: 2022 Technical specifications: • Working width: 1,600 mm • Material: Polypropylene (PP), MFI 230 / 2.16 > 400 g/10 min • Output: Up to 65 kg/h per meter width • Product weight: 10–80 g/m² • Production speed: 5–80 m/min • Die head: MB 1600, 50 h/in • Extruder: RT-1101-1-100, L/D 30 • Heating capacity, rotary beam: 65–172 kW • Winder: contact winder with preset reel change • Max. winding diameter: 1,250 mm • Web width: 1,700 mm • Winding tension: 10–100 N/m Additional equipment and accessories: • 3-component dosing system • 80 mm automatic seat changer • Ultrasonic cleaning system • Pyrolysis unit • Ozone extraction • Cutting knives • Central control panel with touchscreen and data entry

Condition: used, Year of construction: 1995, operating hours: 5,132 h, Press system with ACP 1500 and APEX 1600, capacity: approx. 14 t/h Continuous operation with integrated pomace re-extraction for increased yield Ksdpfx Aow Hxrlol Nolu Compac press type: ACP 1500, belt width 1,500 mm, press length approx. 4,515 mm, width: 2,440 mm and height approx. 2,180 mm, Press belt / sieve belt Mash feed hopper, juice collection trays Pneumatic cylinder for belt tensioning, pneumatic control, piping Belt cleaning by rotating brush roller and belt scraper blade; Mash pump type: AMP 580, compact design eccentric screw pump Press system with APEX 1600 For the production of fruit juices with exceptionally high yields using integrated pomace re-extraction system Footprint: 3,500 mm x 2,500 mm, including:

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 950693, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 43 m/min, rapid traverse Y-axis: 43 m/min, rapid traverse Z-axis: 30 m/min, nominal power (apparent): 20 kVA, controller manufacturer: Heidenhain, controller model: iTNC 530, workpiece weight (max.): 900 kg, total height: 2,682 mm, total length: 2,340 mm, total width: 2,830 mm, table width: 580 mm, table length: 1,150 mm, table load: 900 kg, rotational speed (max.): 12,000 rpm, overall weight: 4,400 kg, spindle speed (min.): 40 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 9,150 h, spindle motor power: 13,000 W, spindle nose: BT-40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 250 mm, tool diameter: 130 mm, tool weight: 6,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, Bridgeport VMC 1000XP with 73 tool holders Year of manufacture: 04/2003 Serial number: 950693 3 axes Travel: X: 1020 mm, Y: 610 mm, Z: 600 mm Rapid traverse rate X and Y 43 m/min, Z 30 m/min Positioning accuracy ±0.005 mm Repeatability ±0.002 mm Y-axis with 4 guide rails Table: 1150 x 580 mm Table load: 900 kg Spindle motor power 13 kW Speed 12000 rpm Spindle taper BT 40 Dual-arm tool changer: 30 tools Tool change time 5.2 sec Blum measuring probe TC52 Oil mist extraction system Coolant system Automatic central lubrication Vacuum sensor for operating a vacuum clamping plate Kedpszbqx Sjfx Al Nelu Control: Heidenhain iTNC 530 Connection: 400 V, 3-phase, 50 Hz; Full load current 30 A, Total current 20 kVA Pneumatics: Compressed air 5.5 bar Dimensions: 2830 x 2340 x 2682 mm Weight: 4400 kg Spindle operating time: 9150 h The machine was mainly used for machining aluminum and plastic, therefore the guide rails and the spindle are in very good condition. The machine can also be sold without the tool holders; in this case, the purchase price will be reduced by €1500.00 (new price approx. €4800.00). 73 tool holders 10 pcs. Weldon collet chuck, Ø 6 1 pcs. Weldon collet chuck, Ø 8 6 pcs. Weldon collet chuck, Ø10 4 pcs. Weldon collet chuck, Ø12 4 pcs. Weldon collet chuck, Ø16 3 pcs. Weldon collet chuck, Ø20 4 pcs. Long Weldon collet chuck, length 160, Ø8/10/12/16 18 pcs. OZ collet chuck DIN 6388, Ø 2-16 3 pcs. Threaded length compensation collet chuck 1 pcs. Intermediate sleeve for ISO 30 2 pcs. Milling cutter holder for screw-in milling cutters 2 pcs. Knife tool holder Ø 16 x 100 1 pcs. Knife tool holder Ø 22 x 160 1 pcs. Knife tool holder Ø 27 x 40 1 pcs. Knife tool holder Ø 40 x 160 2 pcs. Drill chuck holder B12 3 pcs. Albrecht drill chuck Ø 0-5 mm mounted on a taper 1 pcs. Short drill chuck Ø 0-8 mm 4 pcs. Short drill chuck Ø 1-13 mm 2 pcs. Precision collet chuck WNT Centro-P with collets Ø 6/8/10/12

Condition: used, used spindle headstock suitable as a source of spare parts spindle bore 90 mm Kledpfx Asy Ul Hfjl Neu clutch in good condition

Condition: excellent (used), Working travels 1600 x 900 x 800 mm Table size 1700 x 850 mm Spindle taper SK40 Spindle speeds -10'000 rpm Tool changer 30 Pos. Control: HEIDENHAIN iTNC530 Kedpfon Hqa Tsx Al Nolu 3D Measuring taper Misc.accessories MARCELS MASCHINEN CH

Condition: new, Year of construction: 2025, pressure 1000 t distance between columns 4250 mm stroke 400 mm Control SIEMENS S7-1500F table dimension - longitudinal 4000 mm table dimension - cross 1600 mm total power requirement 200 kW Ksdsym D E Aspfx Al Nelu weight of the machine ca. 250 t dimensions of the machine ca. 7,5 x 4,8 x 7,4 m