Used Jean Müller Gst A 2 400A for sale (105,869)

Condition: ready for operation (used), Indramat MAC 112B-0-LD-2-C/130-A-0 / S001 servo motor, serial number: 48736, used, shows significant signs of wear, 100% functional, scope of delivery as shown in the photos. Nwedpfx Aoy U Ef Ujfwsk

Condition: ready for operation (used), Rexroth MAC112A-0-VD-2-C/130-A-1 3-phase permanent magnet motor MNR: R911224444 SN:MAC112-A0256 ,used, normal signs of wear, 100% functional, scope of delivery as per photos Nwsdjtz Idwopfx Afwok

Condition: ready for operation (used), Indramat MAC 112D-0-ED-2-C/130-A-1 permanent magnet synchronous motor, serial number as shown in the photo, used, significant signs of wear, 100% functional, scope of delivery as shown in the photos. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! Nodpfsi D Iivex Afwswk

Condition: ready for operation (used), Indramat MAC093A-0-PS-2-C/110-A-1/S005 permanent magnet motor, serial number as shown in the photo, mounting hole spacing: 116 x 116 mm, drive shaft diameter: 24 mm, used, normal signs of wear, 100% functional. Nedpfei D Imvex Afwowk

Condition: ready for operation (used), Indramat MAC090B-0-JD-2-C / 110-A-1 three-phase AC servomotor, serial number: 42433, used, in good condition, 100% functional, scope of delivery as shown in the photos. Nwodpfx Aey T Uniefwsk

Condition: ready for operation (used), Indramat MAC090C-0-GD-2-C/110-A-1/S001 permanent magnet motor, serial number: MAC090-77267, used, in good condition, 100% functional, scope of supply as shown in the photos. Nwedpfx Asy T Un Asfwek

Condition: ready for operation (used), Indramat MAC114C-0-MD-2-C/130-A-1 Permanent Magnet Motor, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of supply as shown in the photos. Nsdpsi D Irdofx Afwjwk

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel Nsdpfx Aeyug R Refwjwk has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module

Condition: excellent (used), Year of construction: 2010, power: 600 kW (815.77 HP), 1 burnt Weishaupt oil burner ----- Type : WM-L20 / 2-A Version : R Nox class : 2 Output : 600 - 2.100 kW Oil throughput : 50 - 176 kg/h Year of construction : 2010 Nedpfx Afouugwcowjwk with WFM 100

Condition: excellent (used), Year of construction: 2000, used Weishaupt burner ----- RGL70 2-A/ ZM year of manufacture: 2000 Nodexf Dzyspfx Afwowk output: 1,000 - 10,500 kW

Condition: excellent (used), Year of construction: 2022, Technical data: - Total filter capacity approx. 150 l/min - Filter fineness approx. 3 μm nominal - Dimensions (W x D x H) approx. 1400 x 1300 x 1100 mm - Tank capacity approx. 800 l Equipment: - 2 filter groups, individually backwashable, each with 1 TCF filter tower - 1 filter pump - 1 pneumatic unit - 1 manual sludge removal system with sludge bag - Internal system piping - Color RAL 7035 - 1 control cabinet, wired according to VDE standards, PLC control, Nwodpfx Afjzk Ek Tjwjk operation and parameterization via touch panel 1 unit of machine supply pump for supplying the machine with filtered coolant as a submersible centrifugal pump Technical data: - Flow rate: approx. 70 l/min - Delivery pressure: approx. 5 bar - Drive: 400V, 50Hz 1 unit of cooling pump as a submersible centrifugal pump Technical data: - Flow rate: approx. 80-120 l/min - Delivery pressure: approx. 1.5 bar - Drive: 400V, 50Hz, IE3

Condition: new, Diamond grinding wheel Make Wendt shape 6 A2 (28416) diameter 125 mm coating width 2 x 9 mm layer thickness 3 mm grit D 91 for universal grinding bore 20 mm unused, in opened original packaging Nodsmxi Tqepfx Afwewk

Condition: new, functionality: fully functional, Grundfos TPE 50-430/2 S-A-F-A-BQQE-LD1 Single Stage Close Coupled In Line Centrifugal Pump. Specifications: DN50 flanges 345mm between flanges Q = 35.1m3/h Nwedetp A Shspfx Afwok H = 33.9m n= 2920 /min Good working condition. Please check out our other listings as well.

Condition: used, Year of construction: 2008, Technical details: max. workpiece diameter: 29 mm Nedolqac Sopfx Afwewk min. workpiece diameter: 26 mm workpiece length: 66 mm the system was originally delivered for the following workpiece sizes: diameter 26mm - 29mm length 65mm - 66mm Changing parts in the clamping device, handling, etc. would probably result in diameters of up to approx. Ø50mm Total length will probably be almost 400 mm possible with a few conversions. Also dependent on tool lengths, machining lengths on the component, etc. *

Condition: used, mileage: 134,155 km, power: 170 kW (231.14 HP), first registration: 04/2015, fuel type: diesel, empty load weight: 8,035 kg, maximum load weight: 5,465 kg, overall weight: 13,500 kg, tire size: 10R22.5, axle configuration: 4x4, wheelbase: 4,160 mm, next inspection (TÜV): 11/2026, brakes: engine braking, color: red, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, loading space length: 5,200 mm, loading space width: 2,460 mm, loading space height: 800 mm, Equipment: ABS, additional headlights, all wheel drive, cabin, crane, cruise control, differential lock, fog lights, immobilizer system, onboard computer, power assisted steering, trailer coupling, Vehicle location: Bovenden, ClassicSpace, Permit vehicle, driver's suspension seat, rear window, electric mirrors, heated mirrors, electric window left, electric window right, sun visor, cruise control, ABS (anti-lock braking system), constant throttle, PTO (power take-off), chassis cladding, differential lock, fog lights, work lights, storage box, leaf suspension, trailer hitch ball head, trailer hitch air+electric, underrun protection, roof hatch, rear-mounted crane, emergency stop, foldable, 2-point hydraulic support, 2x hydraulic extensions, green emissions sticker. Wheelbase: 4160 mm Superstructure: dropside body with aluminum sideboards and rear-mounted Hiab 055 B-2 CL crane (6t front axle, hypoid rear axle 11t, 390 mm crown wheel), ABS brakes, deactivatable ABS, drum brakes on front and rear axles, condensate monitoring for compressed air system, rear axle stabilizer, classic cockpit, pollen filter, PSM, ClassicSpace, offroad driving mode, Mercedes PowerShift 3, pre-fitting for toll recorder, daytime running lights, high performance engine brake, NA MB 60-2c MPA low-speed engine. Nwsdpfx Asyi Aqvefwsk Load chart: 3.8m - 1140kg, 5.4m - 760kg, 7.2m - 560kg! Safety certification (UVV) until 12/2026 Loading height approx. 1370mm! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 617 138 66, input voltage: 380 V, type of input current: three-phase, total length: 5,000 mm, total width: 3,100 mm, total height: 2,000 mm, Rotary slitter for converting rolls into sheets Cardboard and corrugated paper Slitting width from 700 to 1500 mm Maximum roll diameter: 1500 mm Nwsdpjzi S Agefx Afwjk

Condition: used, power capacity 38 Nm volt 0 V ampere 42 A weight of the machine ca. 59 Kg Njdpoytg Tiofx Afwjwk

Condition: used, Year of construction: 1980, sheet width 2050 mm plate thickness 8 mm electrical . weight of the machine ca. 6,3 t +++++ Nodpfx Afskxhrhjwjwk Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1988, plate width 2000 mm plate depth 3500 mm plate height 270 mm Nodpfsiiii Sox Afwewk weight 5,5 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Year of construction: 1996, condition: ready for operation (used), We have a large stock of used axle motors, gearboxes, etc. in our warehouse. Please inquire about your specific requirements. Nwjdpsgtmwtjfx Afwjk We offer a range of CNC lathes and milling machines, from older models to virtually new ones. INDRAMAT / SIEMENS / FANUC /

Condition: new, Grundfos CRN32-5-2 A-F-G-E-HQQE Vertical centrifugal pump CRN 32-5-2 A-F-A-E-HQQE Vertical, multistage centrifugal pump with opposing suction and discharge connections (inline design). The pump components in contact with the medium are made of high-quality stainless steel. The cartridge seal promises high reliability and ease of servicing. Power is transmitted via a rigid, split coupling. The pipe connection is made via combined DIN flanges. The pump is equipped with a 3-phase, fan-cooled asynchronous motor. Manufacturer: Grundfos Manufacturer Product Group: Vertical Centrifugal Pumps Manufacturer Product Group: Vertical Centrifugal Pumps CRN Centrifugal pump CRN Manufacturer article number: 96122358 Connection inlet side: Flange Connection outlet side: Flange Connection standard inlet side: EN 1092-2 Nominal diameter, connection outlet side: DN 65 Njdpfx Aewbfigofwswk Design: Vertical Speed: 2924 min Motor output power: 11.0 kW Protection class: IP55 Max delivery head: 90.2 m Max working pressure: 16 bar Weight: 193.2 kg List price: 14,844.00 € Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items in other sizes - new and used - in our store! International shipping costs on request!

Condition: new, Year of construction: 2020, functionality: fully functional, power: 2.2 kW (2.99 HP), rotational speed (max.): 2,700 rpm, Demag motor/gearbox KBA 100 A -12/2 ED = 15/40% 0.21 / 2.2 kW 425 / 2700 rpm Gearbox DO8 i = 3.24 Nwsdpfx Afeywkq Ujwok Shaft diameter: 50 mm Condition: as good as new Price on request

Condition: used, machine/vehicle number: 2819-0517, x-travel:300 mm y-travel:300 mm z-travel:400 (340 with Apron) mm surface area:390 x 620 / Chip tray mm turning speeds:40- 2500 U/min feed range:02 - 3600 mm/min rapid feed:4,0 m/min control:Contour 3 - 3D path Control System spindle taper:SK40 quill stroke:60 mm milling-head swivable +/-:90* spindle drive motor:2,0 kW total power requirement:1,6 / 2,0 kW weight of the machine ca.:1,3 t dimensions of the machine ca.:1,8 x 1,8 x 1,8 m Deckel FP2A Universal Milling Machine - Spilndle Head can be swiveled 90 °, can be used as vertical and horizontal machining Center. - Rigid Angle Table: 620 x 390 mm (Max. Load 250 kg) Nodpecxxp Tjfx Afwewk - Extendible sleeves: vertically 80 mm, horizontally 60 mm - Hydralic clamping system SK40 with Pull studs DIN 2080 or DIN 69872 Seperate Power Cabin, Central Lubrication and Coolant System, Chip tray and Splash Gaurd

Year of construction: 2026, condition: new, functionality: fully functional, RAFFRESCATORE PORTATILE,PORTATA D'ARIA m3/h 12000,AUTOMA 2000 A-CLIMA 2. Nsdpfx Aezhtwcjfwowk

Condition: used, Year of construction: 2020, functionality: limited functionality, overall weight: 150 kg, GRUNDFOS Electronically Controlled Dry-Running Pump TPE 100-250/2-S A-F-A-BAQE-ND1 Single-Stage Inline Pump Art. 99114824 PN16. 3 x 380-500 V DN100 with MGE160MH-2-FF300-JA Motor We are offering the Grundfos electronically controlled dry-running pump. ⭐︎ Condition: Good (used) The electronically controlled dry-running pump is used but fully operational. The pump was functioning flawlessly up until removal a few weeks ago. Manufacturer: Grundfos Model: TPE 100-250/2-S A-F-A-BAQE-ND1 Description: Single-stage inline pumps with speed-controlled MGE motor Frequency converter: integrated Pump speed: 2930 rpm Rated flow: 135 m³/h Nsdpfx Aoyc T Apefwowk Rated head: 20.1 m Mechanical seal: BAQE Pump housing: Cast iron Impeller: Cast iron Gross weight: 157 kg For further technical details, please refer to the nameplate. Scope of delivery as shown. Inspection prior to purchase is possible and expressly encouraged. 2 units available. Price: per unit #Shelf 21-1-9 Shipping possible, but buyer pays shipping costs. Single-stage volute pump with opposing suction and discharge ports in inline design. Suction and discharge ports have the same diameter. The pumps are constructed according to the top-pull-out principle, i.e., the pump head (motor, headpiece, and impeller) can be easily removed for servicing or maintenance while the pump housing remains in the piping. The pump is equipped with an unbalanced rubber bellows seal. The mechanical seal complies with EN 12756. Piping connection via DIN flanges PN 16 according to EN 1092-2 and ISO 7005-2. The pump features a fan-cooled permanent magnet synchronous motor. The motor efficiency corresponds to energy efficiency class IE5 according to IEC 60034-30-2. For speed control, the motor is equipped with a frequency converter and PI controller, both integrated into the motor terminal box. Electronic speed control enables continuous adaptation of motor speed and thus pump output to current demand. The pump is equipped with a differential pressure sensor.