Used Jung F 50R for sale (33,794)

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, MAN 8x4 Hydrodrive with F1150 Fassi Loader Crane Vehicle Description for: TGS 35.520 8x2H-6 BL CH Removable flatbed, Jost fifth wheel coupling, fully clad V2A Trade tonnage: 35 t 2,980 mm main wheelbase 1,795 mm wheelbase between front axles 1,350 mm wheelbase between rear axle and trailing axle Side-mounted exhaust silencer, right side Ground outlet exhaust 2 batteries, 12V, 210 Ah, Super Longlife (AGM), maintenance-free, for increased electrical requirements 390 l fuel tank capacity, left side 35 l AdBlue tank capacity, right side Air compressor, 1 cylinder, 360 cc, with economy system Pneumatically controlled air supply system Air tanks, steel Electronic Braking System (EBS) Anti-lock Braking System (ABS) Full emergency braking assistant Disc brakes on front axle Disc brakes on second front axle Disc brakes on rear axle Njdpozmkxhsfx Aazjlg Disc brakes on trailing axle Emergency brake signal, hazard warning activation LED side marker lights MAN D2676 LFAX diesel engine, 382 kW (520 hp) power, 2,650 Nm torque, Euro 6e Heated fuel filter, suitable for fuels up to cleanliness class 25 Pre-fuel filter with oil/water separator, with water sensor, heated (mixing valve) F1150RA.2.28 L616 Winch + 2-man basket (available on request at extra cost) Endless slewing range All hydraulic cylinders are double-acting Piston rods hard-chromed Double knuckle joint system with PROLINK (over-stretchable knuckle boom up to 12°) Electronic overload shutdown with FX900 FASSI stability control FSC incl. LMB II Emergency stop and visual alarm (90% and 100%) Pressure-limiting and load-holding valves XF system (Extra Fast) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %) and 90% + 100% warning on display Danfoss D900 valve block with 4 control valves mounted on the crane column Emergency operation for crane control High-pressure filter supplied plumbed Separate hydraulic tank (260l) with filter and oil cooler mounted on the crane base Hydraulic outriggers, extendable both sides hydraulically, support width 8.84m Outrigger control via radio with proportional valve block IMC system (Integral Machine Control) and ADC (Automatic Dynamic Control) = load-dependent speed control Standard color RAL 3020 traffic red – all cylinders painted black Load hook and mounting brackets (short/500mm) Transport position: folded crosswise to direction of travel Note: Observe board voltage / 12V or 24V, standard 24V FASSI Stability Control FSC-S/II 1 IE742 terminal box Low-profile subframe 180° hydraulically tiltable outrigger legs, both sides Control system for additional function (winch/xhe-dynamic) Control system for 2 additional functions with 2 hose guidance systems / xhe-dynamic Preparation for variable displacement pump (LS) Work light operable via display (1 b/w function) 1 LED work light mounted on knuckle boom LED for 2 outrigger legs, not mounted (crane) LED for 2 outrigger legs, not mounted (additional outrigger supports) GR.15 electrical rotary distributor with 15 slip rings FUNK-V7-RCS V7 RCS radio remote control Fassi radio remote control V7S: Available with 6 or 8 functions with linear levers or joysticks. V7S with 4.3" color display / 24bit - 480 x 272 px, with 8 push buttons Engine start/stop, RPM +/-, 6 x ON/OFF functions, 10m cable and various operating speed controls, incl. second battery, charger, neck and waist belt

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, For sale: a fully automatic, professional Furnimate NAT-620-F line (company information provided at the end of the advertisement) for industrial-scale wood joining, creating so-called micro-dowels, grooves, and zigzags – maximum length 6.6 m. Output: approximately 1500 linear meters per hour (depends on the cross-section of the element). The length can be automatically divided into 6 parts. Fully functional, in continuous operation; demonstration of its capabilities is possible on-site at the production facility. Nledpfx Aezzw R Hoazog High-quality Siemens control electronics. Lightly used, only a few hours per week. VAT invoice 23%. Manufactured in Taiwan in 2018. In operation since 2019. All parts and sensors are readily available on the Polish and international markets. If you have any questions, please contact us by phone or email.

Year of construction: 2021, condition: excellent (used), Pump LOWARA ECOCIRC XL 40-180 F Capacity: 8 liters/s. Year of construction: 2021 - Rarely used Flanges DN40 Voltage: 230 V mono (see technical details on photos) Nedjzzwblepfx Aazelg

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 103979, We offer for sale CNC vertical lathe EMAG, VL5i F., year of production 2016, used, preserved, functional. Still in production. Must see. EXW price incl. loading. Nodpfxouyh Tdj Aazolg More information on request.

Condition: used, Year of construction: 2012, functionality: fully functional, For sale is a high-performance DIMECO LINAPUNCH MC-F CNC coil punching system for the automated processing of strip material directly from the coil. This system is particularly suitable for the economical production of perforated sheets, mounting plates, fastening rails, ventilation components, and customer-specific punched parts in medium to large quantities. Direct processing from the coil significantly reduces material consumption, setup times, and per-piece costs. The LINAPUNCH technology combines the flexibility of a CNC punching machine with the productivity of a continuous coil line. The system operates with standardized thick-turret tools and enables highly productive manufacturing processes. Technical data: Manufacturer: DIMECO Type: LINAPUNCH MC-F Machine type: CNC coil punching system / punching line Control: CNC, Siemens Simostar 370 Coil processing: Coil inner diameter: 508/610 mm Coil outer diameter max.: 1700 mm Coil weight max.: 6000 kg Strip width min./max.: 170 to 525 mm Material thickness: 0.4 to 3 mm Product length max.: 6000 mm Feed length programmable Servo-controlled NC strip feed Automatic strip guidance Punching technology: Punching force: approx. 20 t Multi-axis punching system (X/Y axis) Programmable punching stroke Auto-index function Multi-index function Tool holder for standard thick-turret tools Number of punches: 26 pieces Number of punching heads: 1 piece Number of revolving tool stations: 2 Nsdpfx Aaezmv Dvezolg Consisting of: Coil unwinder Leveling unit NC feed LINAPUNCH MC-F punching head Shear Ink marking unit Drop table stacker 2 lifting tables Control panel with CNC control Safety enclosure Application areas: Electrical industry Switchgear construction Ventilation and air conditioning technology Metalworking Profile and component manufacturing Series production from coil material EXW, assistance can be provided with dismantling and loading.

Year of construction: 2021, condition: excellent (used), Pump LOWARA ECOCIRC XL 40-180 F Capacity: 8 liters/s. Nedjzzwbrspfx Aazjlg Flanges DN40 Voltage: 230 V mono (see technical details on photos) Year of construction: 2021 - Rarely used

Condition: excellent (used), Year of construction: 1998, Equipment: CE marking, documentation/manual, saw blade guard, scorer, Sled length: 3400 mm Cutting width at the rip fence: 1350 mm Cutting width at the crosscut fence: 3200 mm Nljdpfx Aszq Srkoazjg Cutting depth: 145 mm Scoring saw: yes With electromotive height and lateral adjustment Rapido scoring system for stepless cutting width adjustment Adjustment range 2.8 - 3.8 mm including scoring saw blade Height adjustment of saw blade: electric Swivel adjustment of saw blade: electric Adjustment of rip fence: manual Adjustment of crosscut fence: manual Display of saw blade angle: digital display Display of rip fence: scale Display of crosscut line: scale Saw blade diameter: 450 mm Speeds: 4 Motor power: 5.5 kW Palin parallel cutting device as an add-on unit with miter adjustment with display on the sliding table Dust extraction connection: 80 and 120 mm Machine length: 3400 mm Machine width: 2200 mm Weight: 1200 kg Location: in stock at 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 2012, operating hours: 6,400 h, Jungheinrich DFG425S, duplo435, free-lift, side-shift forklift, 6400 hours, 2012. A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex Nuland. Nsdpfx Aez Da Tgsazolg Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call beforehand as we are not always available. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, mileage: 106,000 km, power: 301 kW (409.25 HP), first registration: 06/2016, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: silver, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, navigation system, parking heater, Scania P 450 RJH Horse Truck, 6 Horses, Pop-Out ///Vehicle also available for rent/// 6 horses, side and rear ramp, pop-out, basement under living area, storage compartments around the truck, 4 sleeping berths, living room, large bed above the bathroom, video surveillance and temperature monitoring for the horse compartment, LG stand-alone air conditioning, stand-alone heater, 3 TVs/satellite, high-quality wood, bathroom, shower, toilet, air conditioning, kitchen, leather seating area, microwave, awning, refrigerator and freezer, external saddle storage, Generator, winch, cruise control, alloy wheels, navigation system, air suspension, steerable rear axle, trailer hitch, and more. Errors/input errors and prior sale are subject to change. * NET PRICE POSSIBLE. * Top leasing offers * Net price within Germany plus 19% VAT. * Available immediately. Location and viewing of our vehicles: STX HORSETRUCKS GERMANY Hamburgerstrasse 65 23816 Leezen Nodpoh Erikjfx Aazjlg Sales and service of all brands in the field of horse transporters and trailers. Please arrange an appointment in advance. Contact: Richard Theurer, Andreas Theurer

Condition: used, mileage: 1,001 km, first registration: 01/2015, color: yellow, driver cabin: other, gearing type: other, loading space volume: 36 m³, loading space length: 6,030 mm, loading space width: 2,430 mm, loading space height: 2,460 mm, Year of construction: 2015, Vehicle location: Bovenden, doors, lashing rails, light roof Body: Young box body with double wing door, galvanized substructure, galvanized subframe and cross beams, dismantling of Daimler-Benz Atego 816 4x2 with wheelbase 4220mm! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Nledpfx Aaevhh Ruszeg

Condition: new, Year of construction: 2022, operating hours: 24 h, functionality: fully functional, machine/vehicle number: 456516, overall weight: 255 kg, load capacity: 20 kg, arm reach: 2,010 mm, This is a KUKA KR 20 R2010 KS-F/SEL industrial robot with KRC5 controller, manufactured in 2022. Nljdpfx Aezl Dv Reazeg The controller includes the following options: KUKA.ActivationManagementTool KUKA.Platform DiagnosisSafety DiagnosisServiceEtherCAT ExpertTech GripperSpotTech KUKA.BoardPackage KUKA.DeviceConnector (pre-installed) KUKAPROFINET MS KUKA.SoftwarePackage smartPAD-2 KUKA.UpdatePackageFirmware KUKA.UpdateService KUKA.UpdateServiceConfiguration LoadDataDetermination OrangeApps.UserLogonUSB SafeOperation UserTech

Year of construction: 2002, condition: used, fuel type: electric, Control, control part, interface, driving control, driving current control -Manufacturer: Jungheinrich, drive control from picking truck type: ECE 20 -Type: AS 2412/1 F Nljdpfx Aji Dudreazog -Mat no.: 50059236 -Voltage: 24V -Number: 1x control unit available -Price per piece -Dimensions: 250/190/H100 mm -Weight: 4.2 kg/pc.

Condition: used, mileage: 181 km, power: 120 kW (163.15 HP), first registration: 03/2026, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, number of seats: 3, loading space length: 4,380 mm, loading space width: 2,110 mm, loading space height: 2,260 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, tail-lift, MAN TGE Box Truck with Tail Lift Box body Junge Ecobox * Euro 6 * 8-speed automatic transmission * 3D roof spoiler * 2 rows of combination lashing rails * Floor lashing rings (airline tracks left and right) * Tail lift: 4-cylinder Dhollandia, 750 kg load capacity, roll-off safety feature * Navigation system * Reversing camera * Electric windows * Air conditioning * Adjustable driver’s seat * Fog lights * Extended mirrors * Through-loading height: 2,190 mm Nedpfxexxgd Dj Aazjlg * Internal height: 2,260 mm * Internal width: 2,110 mm * Internal length: 4,380 mm * Multifunction steering wheel * Virtual cockpit * Automatic lighting Speed limit: 120 km/h Subject to prior sale and errors! Sale exclusively under our General Terms and Conditions. Important Note – Important Information: Despite careful checking of all details in our offer, errors may occasionally occur. These may sometimes be due to transmission errors on the platforms of different providers. Therefore, please note that all information is provided without guarantee and does not constitute a legal claim. Legal Notice: This sales advertisement does not constitute an offer within the meaning of §145 BGB (German Civil Code). Rather, it is information for the initiation of a contract. All information provided is without guarantee and does not constitute assured characteristics.

Condition: ready for operation (used), functionality: fully functional, grinding length: 600 mm, grinding width: 250 mm, space requirement height: 2,440 mm, space requirement length: 3,000 mm, space requirement width: 2,050 mm, The machine has undergone geometric revision and is fully functional. If required, further work can be carried out, such as a complete overhaul or repainting in your desired color. Nledezc E Azepfx Aazog

Condition: good (used), Year of construction: 2010, 1 x Spako Electric Jacketed Cooking Vessel Year: 2010 Model: DW 150 RW Capacity: 150litres Nsdpfxez Dw Eaj Aazjlg Suitable for sauces, soups, fillings, preserves, ready meals and other cooked food products.

Condition: used, Year of construction: 1985, Altendorf panel saw F 45, Year of manufacture: 1985 Machine number: 85-4-122 Motor: 5.5 kW / 400 Volt Scoring unit: 0.75 kW Cutting length: 2800 mm Cutting width: 1250 mm Raising/lowering and tilting up to 45° via handwheel Spindle speeds: 3, 4, 5 and 6000 rpm Max. saw blade diameter: 400 mm Max. cutting height: 130 mm Parallel fence Table extension: 800 mm Nedjzx R N Dopfx Aazelg Miter gauge

Condition: good (used), Year of construction: 2002, functionality: fully functional, Roller diameter: 120 mm Roller width: 60 mm Motor: 0.7 kW 4 speeds: 4, 8, 11, 22 m/min. Nlodpfxez D Dg Re Aazjg Direction of rotation can be switched: forward/reverse Complete with gantry support.

Condition: used, Year of construction: 2013, Twelve machines for food and meat processing are available, including four metal detectors, two derinding machines and one weigh-price labeler, one knife holder washing machine, one separator, one slicer, one meat band saw and one checkweigher. 1) Bizerba GS weigh-price labeler, version: automatic weighing instrument for individual weighing with price printing device. 2) Itec 22560-EL knife holder washing machine, year of manufacture: 2009, conveyor speed: approx. 2.6m/min, cleaning capacity: approx. 14knife holders/min, water tank volume: approx. 270l, max. cleaning water temperature: approx. 43°C, final rinse temperature: approx. 82°C. 3) 2 × Pulsotronic M-Pulse2 InFlex65 compact metal detectors, year of manufacture: 2013, suitable for metal detection in liquid and paste-like products, free product pipe diameter: approx. 57mm. 4) Pulsotronic M-Pulse 2 InFlex 65-3 metal detector, year of manufacture: 2018, suitable for filling machines as well as liquid and paste-like products, product pipe height: approx. 950mm-1250mm, free product pipe diameter: approx. 57mm. 5) Mettler Toledo Safeline metal detector. 6) Cri-Man SM300/50 separator for solid-liquid separation, design: screw press separator, screw speed: approx. 33rpm, screen opening: 0.5mm, throughput: approx. 37m³/h, machine weight: approx. 465kg. 7) Weber ASA 560 derinding machine, year of manufacture: 2003, working width: approx. 560mm. 8) Maja ESM/3550 derinding machine, year of manufacture: 2004, working width: approx. 554mm, cutting speed: approx. 22m/min, machine dimensions X/Y/Z: approx. 986mm/696mm/988mm, weight: approx. 170kg. 9) Bizerba VS 12 F slicer, blade diameter: 350mm, max. slice thickness: 24mm, max. round product diameter: approx. 270mm, max. rectangular product dimensions: approx. 315mm/245mm, blade speed: approx. 266rpm, machine dimensions X/Y/Z: approx. 860mm/770mm/480mm, weight: approx. 48kg. 10) Kolbe meat band saw. 11) Liebel LWS1400 checkweigher, weighing range: approx. 100g-6000g. An on-site inspection is possible. Nledpfx Aaozwgiqozog

Condition: used, machine/vehicle number: 008562, X axis working area: 2465 mm Y axis working area: 1260 mm Nljdpfx Aaozvwilezjg Working Table: Flat table Main Electrospindle power: 13.2 KW Number of controlled axes: 3 axes Total number of drilling spindles: 10 Total number of tool changer positions: 16

Condition: used, Year of construction: 2017, operating hours: 6,886 h, functionality: fully functional, Basic version DW 3060-F “Buffalo” (Carrier Machine) Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting according to EC directive 50 mm EC towing eye incl. mounting bracket Hydraulically adjustable support leg Splash guards (inner and side mudguards) Permissible total weight 25,000 kg Tyres: 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 360 kW at 2,000 rpm, complies with EUROMOT IV emission standard Reinforced planetary gear 380 kW Additional hydraulic connection 20 l/min Hydraulic preparation for drive system Fuel tank 2 x 300 litres Rear conveyor: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic centre section Longitudinal conveyor: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24 V electrical control system Roller reverse function via electric motor when engine is at standstill Automatically reversing fan Chassis with level control Acoustic start-up warning Doppstadt telematics system Paintwork: RAL2011 deep orange Optional equipment: Hydraulic drive system SHREDDING SYSTEM SIZE “L” 600/4 COMPLETE Additional hydraulic connection 70 l/min Radio remote control Comb extension Size “L” Limiter Mounting for comb extension Limiter Size “L” Overband magnet for rear conveyor Frame for overband magnet Spraying system Nledjxx Tfzepfx Aazeg

Condition: used, clear span: 2,705 mm, load per truss pair (max.): 2,400 kg, Technical specifications for the pallet racking crossbar: Nljdpfx Ajz A Dyueazjg Racking system: Jung Heinrich Type: Esmena Included in the scope of delivery: 01x Pallet racking crossbar, used Material color: RAL1007 yellow Crossbar type: N140x40 SEG4 Box profile: 140 x 40 mm Clip: 4 hooks Clear width: 2,705 mm Maximum load per pair of crossbars: 2,400 kg with evenly distributed load 02x Locking pin, used Design: Fully galvanized For securing the longitudinal beams against unintentional lifting out General information about the item: This item is offered for collection only. Any additional transport or shipment of this item will incur extra costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, year of last overhaul: 2025, For sale: a used, professional edge banding machine, Hebrock model AKV 3007 DK-F, manufactured in 2016, complete with additional equipment (detailed below). First owner. Overhauled last year (drive belt and rollers replaced, and the glue pot was refurbished). The edge banding machine operated on a single shift, 8 hours a day, from Monday to Friday. The machine is designed for efficient edge banding of furniture components with PVC, ABS, melamine, and veneer edges. This model is valued for its high-quality processing, robust construction, and ability to operate in continuous mode. Very good condition – the machine is in fully operational condition, regularly serviced, and ready for use without any additional investment. VAT invoice 23%. Ready for pickup. The machine is available for viewing by appointment in Borów (83-332). Please contact me by phone for more information, as well as videos and photos of the machine in operation. Main parameters and specifications: - Gluing system: Top-mounted hopper for granules. The machine supports standard (EVA) and polyurethane (PUR) adhesives, as well as zero-joint systems. - Edge dimensions: Edge banding thickness from 0.4 to 3 mm for components with a thickness of 10 to 60 mm. Nlsdpozizabjfx Aazeg - Power supply: 400 V / 3 Ph / 50 Hz electrical connection. Maximum power consumption is 14 kW. - Units: Equipped with a scraper, trimming cutter, corner rounding cutter, profiling cutter, and polishing unit. - Additional equipment: Pneumatic beam phase adjustment, optional interchangeable glue pot, front notching saw, free feed, front spraying, cleaning spray. Detailed description: A German-made Hebrock narrow strip edge banding machine with a system for applying glue to the edge of the component and edge banding with edges from 0.4 to 3 mm thick for components from 10 to 60 mm thick, as well as pre-milling the board with diamond cutters. The machine is optimally equipped for every type of edge. The machine's equipment is fully utilized thanks to the computer and PLC control, which fully controls the individual units. The patented Hebrock system in the edge trimming units (which involves adjusting the lower and upper cutters from outside the machine – during operation), as well as automatic adjustment between thin and thick edges, eliminates the need to open the rear housing, which results in significant time savings, comfort, precision, and user-friendliness. Technical data: • Edge thickness: 0.4 – 3 mm • Component thickness: 10 – 60 mm • Max edge height: 65 mm • Compressed air requirement: approx. 450 l/min • Feed speed: 7-11 m/min, 0.75 motor • Glue heating time: 6 min • Total power consumption: max. 14kW • Electrical connection: 400V, 50Hz • Working height: 880 mm • Machine dimensions [mm]: 5850 x 1425 x 1520 • Machine weight: 1600 kg • Exhaust nozzle diameter: ø 140 mm • Required extraction performance: 24 m3/min • Minimum exhaust air velocity in the exhaust nozzle: 20 m/s • Required vacuum in the exhaust nozzle: 1300 Pa

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,600 mm, Travel ranges: Longitudinal (X): 4000 mm Vertical (Z): 1600 mm Lateral (Y): 1300 mm Rotary table: Diameter: 1600 mm Maximum speed: 250 min⁻¹ Drive power (100% duty cycle): 53 kW Maximum transport load (positioning): 8000 kg Maximum transport load (rotation): 3000 - 8000 kg Work table: Length: 4000 mm Width: 1240 mm Height of work table: 760 mm Automatically indexing milling head: Tool interface: ISO 50, DIN 69871 AD Automatic tool clamping: Clamping force 20000 N Spindle speed range: Nodpfszi S E Usx Aazolg Spindle speed: 20 - 5000 min⁻¹ Full power from 340 min⁻¹ Torque at 32 kW/S1: 900 Nm Main drive: Drive power: 43 kW Maximum rapid traverse rate: X-axis 45000 mm/min Y- and Z-axis 35000 mm/min Maximum feed force: X, Y and Z-axis 16000 N Automatic tool changer Magazine positions in M version: Maximum tool positions: SK 50 40 positions Maximum tool positions: Capto C8 20 positions Machine weight: approx. 32,100 kg Equipment: - Work table 4000 x 1240 x 760 mm with integrated rotary table Ø 1600 mm - Swiveling control panel with telescopic arm with HEIDENHAIN TNC 640 HSCI (6 axes + spindle) control, including 19" flat screen, metallic keyboard with integrated mouse and USB interface on the control panel. Processor speed 0.5 ms including HEIDENHAIN smarT.NC. - Interpolative turning with HEIDENHAIN TNC 640 HSCI consisting of CAM system, HEIDENHAIN postprocessor, software adaptation for C-axis (spindle). - Portable electronic hand-held unit HEIDENHAIN HR 520 with 5 m cable. - Automatically indexing milling head / 2 levels with 2.5° x 2.5° division and a tool clamping force of 20,000 N (H200), 32 kW / 900 Nm, tool interface ISO 50 - DIN 69871 AD. Mounting flange with Hirth gearing for adapting turning tool holders, grinding spindles or additional milling heads and a protective ring to cover the Hirth gearing; not required if H205 is selected. - Spindle drive 43 kW at 100% duty cycle via water-cooled HEIDENHAIN inline motor with direct power transmission. The motor is integrated into the milling slide. - Turning tool holder with Capto C8 interface (manual tool clamping) for turning operations incl. Hirth gearing and SK 50 interface according to DIN 69871 AD for adaptation to SORALUCE milling heads. (Semi-automatic changing with additional manual fastening by 8 x M8 screws); not required with fully automatic changing of the turning tool holder. - Pneumatically adjustable pick-up station (travel 500 mm) in the tool changer area for the turning tool holder and protective ring for semi-automatic changing. - Work table with integrated NC rotary table Ø 1,600 mm, for turning operations and for positioning operations with hydraulic clamping. - Rack and pinion drive in the X-axis via two servomotors controlled in a master-slave process.

Condition: used, Year of construction: 1988, Immediately available from prototype construction: Table drilling machine Pfeifer Year of manufacture 1988, in absolute top condition Type F 105 Spindle diameter 105 mm Milling spindle mounting SK 50 Drilling spindle mounting SK 40 Travel distances X/Y/Z 1000/1000/1500 mm Table 1000 x 850 mm Table load capacity 4 tons Spindle speeds 14 – 1500 rpm Spindle stroke 500 mm Rapid traverse 2500 mm/min Spindle drive 7.5 kW, total 12 kW Weight 9 tons Stop block Digital display Nodpfjzwug Dex Aazolg Cabinet with many tools Price: Euro 8,500.00 plus VAT, ex works

Condition: good (used), Year of construction: 2015, operating hours: 11,268 h, load capacity: 2,000 kg, lifting height: 4,800 mm, fuel type: electric, mast type: triplex, empty load weight: 3,500 kg, mileage: 11,268 km, Electric triplex forklift Brand: Jungheinrich Year of manufacture: 2015 Capacity: 2,000 kg Lifts up to a height of 4,800 mm Overall height xxx Equipped with FREELIFT and SIDESHIFT Battery from 2023 Comes with external charger Automatic filling system Nsdjy Diu Sjpfx Aazjlg