Used Keyence Vr-5200 Mit Vr-5000 for sale (9,761)

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,200 mm Max. pallet dimensions: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm Ppsdpfxsykub Aj Am Tew FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Condition: excellent (used), Year of construction: 2009, Mobile coil trolley FORSTNER AG 5000 b2mf 1500 Pjdpjmv Hv Aofx Am Topw Maximum roll width 1500 mm Load capacity 5000 kg Inner diameter 360 - 630 mm Outer diameter 1100 mm With 4-arm spindle Double bearing decoiler with handbrake and steel wheels for movement

Condition: like new (used), Year of construction: 2025, Cantilever racking with roof support: Hot-dip galvanized bolted system Scope of delivery: 9 Racking uprights, height 4,230 mm, with base, usable depth 1,200 mm 27 Cantilever arms with 1,200 mm usable depth, with stop 9 Roof supports with 1,500 mm overhang, pre-drilled for on-site roof construction (*Without wooden purlins and trapezoidal sheets for the roof construction) Including longitudinal and diagonal braces for 1,500 mm upright spacing Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright 2,700 kg plus roof, wind and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof support (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms adjustable in height in 100 mm increments - 3 bolt-on cantilever arms with a depth of 1,200 mm, with stop, per upright = 4 storage levels on top of each other - Including longitudinal and diagonal braces with 1,500 mm center distance - Racking length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable transport with advance notification before delivery. The material is packed in a way that allows for easy unloading. Psdpfxjh R Taqo Am Topw The subsoil must be made of concrete, level and suitable for dowels, and must be able to withstand the applied loads. The customer is responsible for checking and ensuring the condition of the ground, its load-bearing capacity, and any necessary official permits. The racking uprights must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended. According to the professional association, it is recommended that the racking uprights on the top storage level have a minimum overhang of 500 mm from the top edge of the upright.

Condition: like new (used), Year of construction: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms, 1,200 mm usable depth, with guards - 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Excluding timber purlins and trapezoidal metal sheets for the roof structure) - Includes longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. mounting hardware (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available to order at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized Pedpfomhhy Nex Am Topw - Load capacity per upright: 2,700 kg plus additional roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height adjustable in 100 mm increments - Per upright: 3 bolted cantilever arms, depth 1,200 mm, with guards = 4 storage levels - Including longitudinal and diagonal braces with 1,500 mm upright spacing - Rack length: 12,100 mm - Including mounting hardware (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Specialist telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notice before delivery. The material is thoughtfully packaged to facilitate easy unloading. The substructure must be concrete, level, and suitable for dowel anchoring, and capable of bearing the applied loads. The floor condition and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Anchoring to the wall is neither required nor recommended. According to Occupational Safety regulations, it is recommended that the uprights have at least 500 mm overhang above the top storage level.

Condition: good (used), functionality: fully functional, Technical details: SEW motor Pjdpewu Dbbefx Am Topw Type: DV132H8/4BH/HF/TH rpm: 700/1450 IP:54 Hz: 50 400V AC Brake: 400V kg: 83.94 The SEW motor with rotary table is a powerful and versatile drive solution, ideally suited for precise positioning and automation tasks. The motor stands out due to its robust construction and reliable operation, ensuring stable and efficient performance. The integrated rotary table allows flexible and accurate control of movement sequences, making it particularly suitable for use in manufacturing and assembly applications.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, For sale is a measuring system from Keyence, type XM- C1000 The measuring system is something special, as the points to be measured are scanned by hand Very user-friendly and intuitive system. Compact and easy to maintain Control unit and PC XM-1600 are included in the offer Also Measuring probe, exchangeable probes, alignment station, various clamping devices Clamping vice Mouse Touch probe Operating instructions On request, transport and loading can be organized throughout Europe for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Ppjdpfxorq Ebis Am Tew Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: ready for operation (used), Year of construction: 2018, Max. measuring dimensions X/Y/Z: 600mm/300mm/200mm, repeatability: +/-3µm, display error: +/-8µm, measuring modes: program measurements/single measurements/statistical measurements. Various accessories included. Documentation available. Ppedpst H Rd Refx Am Tow

Condition: ready for operation (used), An optical image measuring system Keyence is available. Measuring dimensions X/Y: 100mm/200mm, measuring accuracy at L/100: +/-2µm, camera: CMOS. Includes measuring stage/support table, calibration template, computer and accessories. Documentation available. An on-site inspection is possible. Pjdexu I A Hepfx Am Tspw

Condition: ready for operation (used), A total of 10 deionization devices Keyence are available. Ion generation: +/-7000V, ion balance: +/-30V, max. effective range: approx. 3000mm, working distance range: 50mm-2000mm, electrode material: tungsten, applications: plastics/films/coating/electronics/packaging. Documentation available. An on-site inspection is possible. Pedpfx Aew R U Agem Tjpw

Condition: ready for operation (used), Year of construction: 2018, Type: 3D coordinate measuring machine (CMM), measuring range X/Y/Z: 300mm/250mm/150mm. Documentation available. On-site inspection is possible. Ppjdpoupk A Eofx Am Tjw

Condition: ready for operation (used), Year of construction: 2020, X-axis: +/-100mm, measuring range: 600x300x200mm, max. workpiece weight: 25kg, the machine is as good as new, an on-site inspection is possible. Pjdpsruaaaefx Am Tspw

Condition: ready for operation (used), Year of construction: 2023, A CNC 3D coordinate measuring machine Keyence is available. Table diameter: 500mm, measuring diameter: 500mm, measuring height: 200mm, travel X/Y: 280mm, rotation capability: 360°, tilt angle: 45°, max. table load: 50kg, display resolution: 0.1µm, repeatability: 2µm, measuring accuracy: +/-10µm. Machine dimensions X/Y/Z: approx. 720mm/1000mm/860mm, weight: approx. 30kg. Documentation available. An on-site inspection is possible. Pjdpfxsympc Ho Am Tepw

Condition: ready for operation (used), Two Keyence optical LED light-band micrometers are available. Repeatability: +/-0.03µm, sampling rate: 16000 measurements/s, light source: green InGaN LED. Documentation available. On-site inspection is possible. Ppjdpfx Amjv R Exuj Tjw

Condition: ready for operation (used), Year of construction: 2023, A Keyence optical 3D coordinate measuring machine with a 360° 3D scan is available. Measuring accuracy: +/-10µm, repeatability: 2µm, resolution: 0.1µm, point density: 16 million, measuring diameter (low magnification): 300mm, measuring diameter low magnification/composite: 200mm/500mm, rotation range: 360°, tilt range: 45°, max. table load: 50kg. Machine dimensions X/Y/Z: approx. 1000mm/1000mm/1000mm, weight: approx. 65kg. Documentation available. On-site inspection is possible. Pjdpfswx Rcyjx Am Topw

Condition: ready for operation (used), functionality: fully functional, measuring range X-axis: 200 mm, measuring range Y-axis: 200 mm, total length: 900 mm, total height: 1,500 mm, overall weight: 32 kg, TECHNICAL DETAILS Measuring Range X-Axis: 200 mm Measuring Range Y-Axis: 200 mm Measuring Range Z: Height measurement via autofocus Measuring Method: Optical / Non-contact Measuring Accuracy: ±2 µm Repeatability: Very high, operator-independent MACHINE DETAILS Camera: High-resolution CCD camera Illumination: Incident / Transmitted / Contour lighting Measuring Time: A few seconds per component Dimensions & Weight Dimensions: 900 mm × 500 mm × 1,500 mm Weight: 32 kg Ppodpfjyh A Ddsx Am Tow EQUIPMENT Length, angle, radius, and diameter measurement Contour and shape measurement Comparative measurement (OK/NOK) Automatic dimension recognition Software: KEYENCE IM software

Condition: used, functionality: fully functional, Year of construction: 2020, total length: 950 mm, total height: 1,360 mm, total width: 700 mm, overall weight: 188 kg, feed length X-axis: 297 mm, feed length Y-axis: 210 mm, feed length Z-axis: 200 mm, We are offering this ready-to-use Keyence AGILISTA-3200W. All maintenance has been carried out by Keyence. Ppedpfx Amoy Hmhho Tjw A full service was recently performed by Keyence, and the printer has been in standby mode since. The printer is in excellent condition. Complete accessory set for immediate operation included: - 1x cartridge of print material - 1x cartridge of support material - 3x waste containers - 1x rinse tank for printed parts - Cleaning kit for parts and printer Viewing by appointment possible. On-site introduction/training available upon request. Technical specifications: - Print material: AR-M2 (transparent print material), AR-H1 (heat-resistant print material), AR-G1L (silicone rubber [low hardness]), AR-G1H (silicone rubber [high hardness]) - Support material: AR-S1 (water-soluble support material) - Build volume: 297 × 210 × 200 mm (DIN A4 size × 200 mm) - Resolution: 635 × 400 dpi - Layer thickness: High resolution AR-M2: 15 µm, standard resolution AR-M2: 20 µm, AR-H1: 20 µm, AR-G1L/H: 30 µm - Interface: Ethernet 10BASE-T / 100BASE-TX - Operation: color touch panel - Dimensions: 95 x 70 x 136 cm - Weight: 188 kg If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: ready for operation (used), functionality: fully functional, Condition: used / very good Availability: immediately Description: Keyence LJ-V7080 laser profile sensor (measuring head) from the LJ-V7000 series. Suitable for precise profile and height measurements. Pedpjyx Spnsfx Am Tjpw Scope of delivery: measuring head LJ-V7080 only (without controller / without accessories) Location: Vöhrenbach - Germany Price: €800

Condition: new, Year of construction: 2025, This model SGR-1400 is characterized by the removed upper and lower segments and also the bending beam is divided into segments. In addition, treadle is mounted to the opening of the upper bending beam. - Segments of an upper and lower clamping arm extends the application range, - Blockade by means of a pedal, the hands are free and you can freely position a sheet, - Folding machine for universal use in repair, - and body shops, - Compact design, modern shaped, - Manual folding machine for standard tasks, - Segments of an upper clamp enhance the bending ability segmentback width 30,40,50,60,70 and 100 mm - three cheeks are equipped with segment jaws (full segmentation) -application for preset bending angles Technical specifications: - Max. Working width; 1400 mm - Bending angle max. 160 degrees Ppedpfxoc I T Txe Am Tjw - Max. Sheet thickness (steel) 1.5mm - Weight 285 kg Price: 5.700 Euro

Year of construction: 2020, condition: excellent (used), functionality: fully functional, Mobile 3D coordinate measuring machine - Flexible 3D measurements at any location Image guided 3D coordinate measuring machine Keyence Measuring System WM-3000 Coordinate Measuring System XM-2000, XM-1600 Digital Inspection Station TECHNICAL DETAILS camera chip: 4 MP CMOS Measuring range: 600 x 300 x 200 mm Smallest display unit: 1 µm Smallest angle: 0.0001 Repeatability (locked): +- 3 µm Table load: max. 25 kg Display: 15" TFT Initial purchase: 12/2020 Coordinate measuring system Measuring head: WM-3000 Camera tripod: WM-S1 Tripod extension / stand for measuring head: WM-EX1 Measuring software: incl. laptop Additional software 3D-CAD import/export: WM-H1C WM Battery charger: WM-BC1 Probe battery: WM-B1 Stylus: OP-88422; 2.5 mm Mouse: WM-M30D User manual: German Euro AC power cable: OP-99032, OP-99033 Attachments for camera realignment: OP-88546 Calibration cone for needle probe: OP-88547 Magnets for attachments camera realignment: 972344 Digital test station measuring head: XM-2000 Digital test station control unit: XM-1600 Additional software 3D-CAD import/export: XM-H1C XM Mouse, Keyboard: XM-M26E User manual: English AC power cable: OP-99031 MACHINE DETAILS Ppjdpfspz Ityex Am Tew Main electrical connection: 24 V Weight measuring head: 25,0 kg Weight tripod: 4,5 kg Weight extension: 4.0 kg

Condition: good (used), Year of construction: 1998, functionality: fully functional, CNC machining center • Homag BOF 321, year 1998 designed for the production of stairs and other components. • Homag PC83 control system • Working area X = 5,200 mm • Working area Y = 1,300 mm • Working area Z = 410 mm • Number of milling spindles: 2 • Milling spindle motors: 12 kW • Maximum speed: 24,000 rpm • Swivel arm: Yes • 4-axis machine • Tool clamping system: HSK-F63 • Two tool magazines: 12 tools each • Double working area • Number of operator consoles: 10 • Vacuum pump: 2 • Vacuum pump capacity: 100 m³/h • Safety device: safety mat • CE marking: Yes Ppsdpjx S Ewrsfx Am Tjw

Condition: used, Year of construction: 2013, operating hours: 3,000 h, functionality: unexamined, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, For sale as a complete package: Waterjet Cutting Machine STM 3015, year 2013, with computer from 2018 and 3 network dongles for IGEMS software. Working area: 3000x1500mm High-Pressure Pump Ecotron 40.37, year 2013 Water Softening System, year 2018 – like new Abrasive Backwash System, year 2013 Column Slewing Crane Abus 2t, year 2018 – like new Vacuum Lifting Device Devo-Tech, load capacity 1800kg – like new Various accessories and sandbags available The system was purchased at the end of 2018 and commissioned at the beginning of 2019. The waterjet system and pump had been completely overhauled by the supplier at that time. Unfortunately, the cutting system was hardly used. It only ran for a few hours per year and has not been in operation since about July 2025. Podpfx Asyq Rdyom Topw The high-pressure pump is defective (leaks water and is not sealed). Both high-pressure cylinders have been replaced in recent years. Last serviced in 2025. According to the service technician, repair of the pump would cost approx. CHF 5,000 to 6,000. The crane and vacuum lifting device can also be purchased separately. Please send your offer with price expectations. In 2019, the new price for the crane and vacuum lifter was around CHF 37,000 incl. VAT. The machine can be inspected during business hours. It is still connected, but has been drained and cleaned. Please arrange appointments or submit offers via email, not by phone.

Condition: ready for operation (used), Keyence VHX-500F Digital Microscope Digital Microscope Objectives: 0-50x ; 20-200x Ppjdsunhkwjpfx Am Tew You are welcome to come by for a viewing. We are happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: new, Year of construction: 2024, operating hours: 15 h, functionality: fully functional, type of input current: AC, input voltage: 240 V, measuring range X-axis: 580 mm, measuring range Y-axis: 300 mm, measuring range Z-axis: 200 mm, total width: 579 mm, total length: 916 mm, total height: 844 mm, overall weight: 45 kg, workpiece weight (max.): 50 kg, VL-770 3D measuring system with motorized rotary table Ø500mm - VL-770 measuring head - VL-700 control unit - 500mm object table VL-750 - Measuring range with composition up to Ø500mm or 580x300mm - Cover (light shielding) Podpfx Amjvzqp Hs Topw - Software package (German) - Calibration plate - Software module for form and positional tolerances - Software module for CAD conversion Full description available in the brochure

Condition: like new (used), Year of construction: 2021, Keyece Lasertracker WM 3000, year 12/2020 Ppedpfx Amjy Nx Hho Tow Complete with notebook and handheld probe. Includes tripod and carrying case.

Condition: as good as new (ex-display), FRONIUS TPS 5000 ✅ Scope of delivery: ➤Fronius TPS 5000 power source (500A TRANS PULS SYNERGIC) ➤Fronius FK 4000 ➤Fronius VR 4000 wire feeder unit ➤Fronius intermediate hose package standard from 1.5m ➤Fronius trolley ➤Fronius hose package ➤Ground cable 3-4m ➤Pressure regulator This device can weld almost all materials, including aluminum, steel, and V2A. It features touch wire programs and is also suitable for MIG brazing (Cusi), which is frequently used in the sheet metal industry. Additional options and applications: This TPS series can be easily connected to a robot. All you need is an interface and the appropriate hose package. We also offer the optional RCU 5000i control panel, which allows you to create and import characteristic curves to further expand the functions of the TPS device. ---- Ppodpfx Aowbknbsm Tjw IMMEDIATELY AVAILABLE PROPER INVOICE A viewing is possible in Austria in Vienna, 1230! ✔ Insured shipping on a pallet is no problem! ✔ ✅Questions✅Questions✅Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the device? To explain, we buy like-new used devices, disassemble them, check everything, replace wear parts if necessary, and only then, after successful test welding, is the device released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You are buying an item from us that is also worth seeing and doesn't look completely finished! ►►►Do we receive an invoice when we purchase from you? Yes, we provide a proper invoice. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. ►►►What payment options are available? Advance payment or cash upon personal pickup ►►►Is insured shipping possible? Yes, we will be happy to send you the purchased set well packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at one-third the original price and unfortunately do not have the flexibility to offer a warranty. You are welcome to test the devices on site and pay in cash. ►►►Why buy from us? We are experts in this Fronius welding machine series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We are experts in these devices and don't sell anything we don't know about.