Used Large Vibrating Sieve for sale (9,658)

Condition: not inspected (used), Number of sanding units 4 St sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Ksdpfot Tqy Eex Ag Uodt Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: SIEMENS, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser source model: MAX 12kW mit CE, laser power: 12,000 W, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 20 mm, sheet thickness copper (max.): 20 mm, pipe diameter (max.): 550 mm, pipe length (max.): 12,500 mm, working length: 12,500 mm, travel distance X-axis: 12,000 mm, travel distance Y-axis: 14,300 mm, travel distance Z-axis: 560 mm, positioning accuracy: 0.03 mm, repeat accuracy: 0.03 mm, input voltage: 380 V, type of input current: three-phase, total length: 32,500 mm, total width: 3,900 mm, total height: 3,750 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, fume extraction, safety light barrier, ACME T-Series Tube Laser – Heavy-duty tube laser for the highest demands The ACME T-Series was specifically developed for the processing of large, heavy tubes and profiles. Thanks to its robust machine construction, powerful clamping technology, and high load-bearing capacity, the system is ideal for steel construction, plant engineering, mechanical engineering, and the series production of large components. The combination of high dynamics, extreme stability, and state-of-the-art fiber laser technology enables precise cuts even with large tube diameters and heavy workpieces. Your advantages at a glance ✔ Processing of heavy tubes and profiles with high load capacity ✔ Suitable for round, square, rectangular, and special profiles ✔ High cutting speed with maximum precision ✔ Automatic material feed for efficient production processes ✔ Robust machine construction for low-vibration operation ✔ Intelligent CNC control with easy operation ✔ Reduced non-productive times through automated processes ✔ Perfect for industrial continuous operation Technical highlights Designed for heavy tubes and profiles High load-bearing capacity for material handling State-of-the-art fiber laser technology Precise cuts even with large material thicknesses Automatic loading and unloading systems High acceleration values for short cycle times Intelligent nesting and cutting software Optimized for high production volumes Typical application areas The ACME T-Series is the ideal solution for: Steel and hall construction Machine and plant engineering Vehicle construction Agricultural machinery construction Commercial vehicle industry Structural and metal construction Energy and offshore technology Job manufacturing Maximum performance for large tubes Where conventional tube lasers reach their limits, the strength of the ACME T-Series begins. The robust construction enables the economical processing of heavy and large-sized tubes while maintaining the highest cutting quality. The powerful clamping technology ensures that even long and heavy workpieces are guided safely, resulting in consistently high processing accuracy. The system reduces material handling, increases productivity, and sustainably lowers production costs. Kdsdpfx Agozb Uq So Uot Why the ACME T-Series? More load capacity. More precision. More productivity. The ACME T-Series was developed for companies that want to process large tube cross-sections and heavy profiles efficiently and economically. With its robust design, modern automation, and high process reliability, it is the ideal solution for industrial tube processing in the heavy-duty sector. Laser Handels und Service GmbH Your partner for tube lasers, flatbed lasers, laser welding technology, spare parts, and service in Germany. Consulting, installation, training, and technical support from a single source.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 35,000 l, usable tank capacity: 35,000 l, total length: 4,865 mm, inner diameter: 3,000 mm, outer diameter: 3,016 mm, overall weight: 4,670 kg, wall material: stainless steel, wall thickness: 8 mm, manhole location: top, Equipment: CE marking, sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this large-capacity 316L stainless steel horizontal storage vessel is suitable for bulk hygienic chemical and process liquid storage. Designed for vacuum and low-pressure service. Constructed entirely in 316L stainless steel throughout with 8mm shell and 6mm dish walls, heavy duty stainless steel cradle supports, and ANSI/tri-clamp process connections throughout. Suitable for bulk hygienic storage, excellent condition. Kodpfx Aozht Rijg Ujdt Material: 316L Stainless Steel throughout. Working Volume: 35,000 Litres. Shell ID: 3,000mm. Overall Length: 4,865mm. Shell Wall Thickness: 8mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +80°C. Empty Weight: 4,250–4,670kg depending on configuration. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Factory Tested: 2021. Three units currently available: two insulated and one non-insulated. All vessels are brand new and never commissioned, sourced directly from the same INEOS facility. Tank saddles available on request for either single use or purchase. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options.

Condition: new, Year of construction: 2021, Optimill MB 4PV Drilling and Milling Machine including Accessories (New, Unused Condition): Included accessories: - 20-piece set of packing plates - RTE 165 rotary table - SPW 12 58-piece clamping tool assortment - 4x SE55 leveling feet with vibration dampers - MK4/M16 ER32 3-20 mm collet chuck set Heavy, robust cast construction High smoothness due to ground gears running in an oil bath Forward and reverse operation Automatic quill feed with manual fine feed Motorized positioning of the Z-axis Motorized table feed for the X-axis Coolant system Machine lamp Gear head swivels ± 45° Massive dovetail guide of the column, hand-scraped, for maximum stability and precision Height-adjustable, large protective screen with microswitch Drill depth stop Digital position display DRO 5 Drilling / tapping function Heavy-duty, large cross table, precisely machined surface with T-slots and adjustable gib strips Solid cast machine base with chip tray Single-speed quality industrial motor Wide speed range from 60 - 2,760 rpm via 2 infinitely variable speed ranges SIEMENS SINAMICS V20 frequency inverter Dimensions and weights: Length approx. 1,600 mm Width/Depth approx. 930 mm Kdedpfx Aeyxyiveg Uet Height approx. 2,110 mm Weight approx. 495 kg Drilling-Milling Head: Drilling-milling head tilt range ± 45° Drilling-Milling Capacity: Maximum face mill size: 63 mm Maximum end mill size: 26 mm Drilling capacity in steel (S235JR): 24 mm Continuous drilling capacity in steel (S235JR): 20 mm Electrical Data: Drive motor power: 1.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Horizontal Milling Table: Length: 800 mm Width: 240 mm Distance vertical spindle to milling table max.: 420 mm T-slot size: 14 mm Number of T-slots: 3 T-slot spacing: 80 mm Coolant System: Coolant pump(s) drive rating: 100 W Standards and Approvals: Standard: DIN EN 55011 EMC class: C2 Travel Range: X-axis manual: 560 mm Y-axis manual: 195 mm Z-axis manual: 350 mm X-axis automatic: 480 mm Vertical Spindle: Throat: 258 mm Spindle taper: MK 4 Speed range: 60 – 2,760 rpm Number of speed ranges: 2 Speed control: electronic Drawbar: M16 Quill diameter: 75 mm Quill travel: 120 mm

Condition: new, Year of construction: 2026, Automatic Band Saw CORMAK H400SA The CORMAK H400SA automatic band saw is a high-performance machine designed for precise and repeatable cutting of large steel components, pipes, and closed profiles. Thanks to its double-column construction and automated operating cycle, it is an ideal solution for production plants, steel fabrication workshops, and logistics centers processing large quantities of material. Main advantages of the machine Fully automatic operation – complete cutting cycle without operator intervention: from material clamping, through cutting, to arm return. Hydraulic feeding system and vice – ensure fast, safe, and precise cutting. Arm and vice position memory – reduces cycle time and increases efficiency during serial production. Cooling system and powered cleaning brush – extend the service life of the metal cutting band saw blade. Large cutting capacity – allows cutting materials up to Ø400 mm or 400 × 400 mm. Construction and technology The double-column band saw H400SA is based on a stable steel structure with a cast iron body, ensuring maximum rigidity and effective vibration damping. The saw frame is positioned at a 3° angle relative to the feeding table, which improves cutting performance when processing profiles and structural sections. Precision and work efficiency The hydraulically controlled arm movement with adjustable cutting force and a precision throttle valve allows the cutting pressure to be adapted to the specific material. The hydraulic feeding system with an electronic controller enables programming of the cutting length and the number of pieces. The LCD display provides information about the cutting progress, errors, and material availability. The automatic stop system reacts to faults or completion of the programmed cutting cycle, reducing downtime and improving operational safety. Applications Kdjdeyctr Rjpfx Ag Ujt The CORMAK H400SA automatic band saw is perfectly suited for: metalworking and steel construction industries, profile and structural section processing centers, serial production in fabrication workshops and industrial plants, companies cutting materials to required lengths. Standard equipment Automatic operating cycle Arm and vice position memory system Hydraulic power unit and feeding system Powered blade cleaning brush Coolant circulation system Bimetallic metal cutting band saw blade CE declaration of conformity Operating and maintenance documentation (DTR) Technical data Parameter Value Cutting capacity Ø400 mm or 400 × 400 mm Saw blade dimensions 4900 × 41 × 1.3 mm Blade speeds 40 / 60 / 80 m/min Main motor power 4.6 kW Hydraulic unit motor power 1.5 kW Coolant pump power 0.09 kW Feeding stroke 500 mm Machine dimensions (L × W × H) 2600 × 2400 × 1700 mm Weight 2100 kg

Condition: new, Year of construction: 2026, BENDMASTER 70 Tube and Profile Bending Machine Kdodpfevugv Aox Ag Uot The BENDMASTER 70 tube and profile bending machine is an industrial, non-mandrel bending machine designed for precise bending of steel tubes, square profiles, and materials with larger cross-sections. Thanks to its robust construction, automated bending angle measurement system, and powerful drive unit, the machine provides repeatability, efficiency, and reliability – even during intensive production work. It is an ideal solution for heavy industry, construction, and industrial installation applications. Main advantages of the machine Non-mandrel bending system – enables tube bending without the need for a mandrel, simplifying operation and accelerating the production process. Maximum tube capacity of 70 × 5 mm – allows processing of thick-walled steel and structural tubes. 5 kW main drive motor – provides high torque and reliable bending performance even with demanding materials. Digital bending angle display – real-time monitoring of preset and actual values enables precise parameter adjustment. Two-speed operating system – 1.2 rpm during bending and 2.4 rpm during return movement increase overall cycle efficiency. Stable welded steel construction – ensures resistance to deformation and vibration, even under heavy loads. Dies for tube diameters 38.1 mm, 48.3 mm, and 70 mm – the machine includes tooling for the most commonly used industrial tube sizes. Design and technology The BENDMASTER 70 has been designed as a non-mandrel roller bending machine with an electro-hydraulic drive system, suitable for heavy-duty operation. The powerful 5 kW main motor enables stable and safe bending of large-diameter tubes. The digital bending angle measurement system integrated with the control panel allows precise programming and monitoring of operating parameters. The machine features a compact design and can be integrated into production lines. Precision and work efficiency The BENDMASTER 70 steel tube bending machine provides complete control over the bending process. The die rotation speed during bending (1.2 rpm) ensures accuracy and process safety, while the fast return speed (2.4 rpm) improves productivity. The ability to bend up to 180° allows the production of complete arcs and spiral shapes, including large-section structural tubes. The machine is designed for precise forming of components where dimensional accuracy is critical. Applications The BENDMASTER 70 bending machine is used in many industrial sectors, including: production of steel structures and load-bearing components, construction and installation industries, HVAC and heating system installations, production of railings, gates, and industrial fencing, prefabrication plants for piping systems. Standard equipment Digital bending angle measurement system Tube bending dies: Ø 38.1 mm Ø 48.3 mm Ø 70 mm Technical specifications Parameter Value Maximum tube bending capacity 70 × 5 mm Maximum square profile capacity 50 × 50 × 2 mm Maximum bending angle 180° Die rotation speed during bending 1.2 rpm Die rotation speed during return 2.4 rpm Main motor power 5 kW Overall dimensions 1300 × 700 × 900 mm Weight 680 kg

Condition: new, Year of construction: 2021, Stihl 53 cm Gasoline Lawn Mower RM 655.1 VS The STIHL RM 655 VS gasoline lawn mower is not only a true powerhouse due to its durable aluminum housing. With its Vario drive and a cutting width of 53 cm, it is ideally suited for maintaining large areas. The central, seven-stage cutting height adjustment allows you to choose a grass height from 25 to 85 mm. To make your work easier from the start, its engine is equipped with the ReadyStart function, which ensures reliable starting. During mowing, the speed of the powerful engine remains constant, even when changing speed, and its mono-comfort handle ensures easy handling. The blade-brake clutch of the RM 655 VS is also noteworthy, as it disengages the cutting unit when the engine is running, so short mowing breaks do not require restarting the mower. The foldable grass catcher with a volume of 70 liters and a fill level indicator can be easily emptied. With this gasoline lawn mower, you are choosing a reliable companion for your gardening work. Technical data: • Aluminum housing with wear strips • Guaranteed sound power level LWAd [dB(A)]: 98 dB(A) • Weight: 50 kg • Grass catcher volume: 70 l • Displacement: 173 cm³ • Foldable grass catcher with fill level indicator • Comfort handle • Easy-rolling wheels • Blade-brake clutch (BBC) • Engine with easy-start system (ReadyStart) • Engine type: HD775 OHV SC series • Mulching function & multi-blade • Rated speed of working tool: 2800 rpm • Rated power: 2.6 kW / 3.5 hp • Lawn area: up to 2500 m² • Cutting width: 53 cm • Cutting height: 20-85 mm • Super-Soft handle • Uncertainty KpA [dB(A)]: 2 dB(A) • Vario wheel drive • Vibration guide handle ahw: 3.8 m/s² • Vibration uncertainty K: 1.9 m/s² • Central cutting height adjustment Kdjdpfxetvf R Ee Ag Uot The lawn mower is new and unused. It was only on display in our showroom and has minor storage marks. The lawn mower cannot be shipped by a parcel service as it is too large and too heavy. Shipping by freight forwarder is possible at your expense. No shipping outside EU. You will receive an invoice with VAT shown. Payment exclusively by bank transfer - NO PAYPAL!

Condition: new, Year of construction: 2026, Automatic Band Saw CORMAK H500SA The CORMAK H500SA automatic band saw is an advanced double-column metal cutting band saw designed for precise and efficient cutting of large steel components, pipes, and profiles. Thanks to its fully automated processes, high power, and robust construction, it is perfectly suited for serial production and heavy-duty industrial applications. Main advantages of the machine Automatic cutting cycle – the complete cutting sequence, from material feeding to arm return, is performed without operator intervention. Hydraulic vice and material feeding system – ensure fast, secure, and precise clamping and movement of the workpiece. High cutting capacity – enables processing of materials up to Ø500 mm or 500 × 500 mm. Hydraulic blade tensioning system – automatically maintains optimal blade tension, ensuring process stability. Cooling system and powered blade cleaning brush – extend blade life and improve cutting quality. Construction and technology The machine is built on a heavy-duty cast iron and steel structure, providing high rigidity and minimizing vibrations during operation. The double-column band saw H500SA is equipped with a powerful 7.1 kW main motor and an independent hydraulic system. The saw frame is inclined at a 3° angle relative to the working surface, improving cutting efficiency when processing profiles and structural sections. The blade is guided by precision guides with carbide inserts and roller bearings, ensuring accurate blade alignment and stable operation. The guide head automatically adapts to the width of the material being cut, improving stability and reducing blade wear. Precision and work efficiency The hydraulically controlled arm lowering system with smooth pressure adjustment allows optimal cutting parameters to be selected according to the processed material. The control panel with an LCD display enables programming of the number and length of cut pieces and monitoring of operating parameters. The machine automatically indicates material end, faults, and cutting progress, improving production efficiency and safety. Applications The CORMAK H500SA metal cutting band saw is an industrial machine recommended for: steel construction plants, serial production in metalworking workshops, cutting heavy steel pipes and profiles, large-scale processing of structural and tool steels. Standard equipment Fully automatic operating cycle Kdodpfx Agjyctwmj Uet Arm and vice position memory function Hydraulic power unit and feeding system Hydraulic blade tensioning system Powered blade cleaning brush Coolant circulation system Bimetallic band saw blade CE declaration of conformity Operating and maintenance documentation (DTR) Technical data Parameter Value Cutting capacity Ø500 mm or 500 × 500 mm Blade dimensions 5550 × 41 × 1.3 mm Blade speeds 40 / 60 / 80 m/min Main motor power 7.1 kW Hydraulic unit motor power 1.5 kW Coolant pump power 0.09 kW Blade tensioning Hydraulic Feeding stroke 500 mm Load capacity 3 t Table height 600 mm Machine dimensions (L × W × H) 2900 × 2200 × 1900 mm Weight 2700 kg

Condition: new, Year of construction: 2026, The CORMAK GOLIAT 800 × 4000 (CJ6280YC/4000) Main Advantages Versatile machining capabilities – the GOLIAT 800 × 4000 enables external and internal turning, taper turning, polishing, metric, imperial, module and DP threading, drilling, and broaching operations. Heavy-duty cast iron bed construction – provides maximum vibration damping. The bed is hardened and precisely ground, ensuring excellent torsional rigidity, long service life, and machining accuracy. Central feed control system – equipped with a lead screw and feed shaft for threading and automatic longitudinal and cross feeds. 3-axis digital readout system – displays precise position values for longitudinal movement, cross slide movement, and compound slide movement using optical scales and electronic signal processing. High-quality spindle bearing system – reinforced spindle support with precision bearings ensures smooth operation and high machining stability. High machining capacity – large spindle bore of 105 mm, center distance of 4000 mm, 315 mm 3-jaw chuck, 400 mm bed width, and a powerful 7.5 kW motor provide excellent performance for large workpieces. Rapid longitudinal and cross feed system – significantly reduces machining time and improves productivity. Hardened and ground spindle gears – ensure quiet operation, durability, and reliable power transmission. Automatic feed and threading capability – the lead screw and feed shaft allow precise thread cutting and automatic feeds. Ergonomic control panel – allows easy adjustment of spindle speeds and automatic feed parameters. Threading dial indicator – enables accurate thread engagement and repeatable threading operations. Removable bed gap section – allows machining of oversized components such as discs. With the gap removed, the machine can handle workpieces with a maximum diameter of 1000 mm. Technical Specifications Maximum turning diameter over bed Ø800 mm Maximum turning diameter over cross slide Ø560 mm Maximum turning diameter in bed gap Ø1000 mm Bed gap length 225 mm Distance between centers 4000 mm Bed width 400 mm Maximum tool size 25 × 25 mm Kodpfx Agjzp H Azs Usdt Maximum compound slide travel 140 mm Maximum cross slide travel 350 mm Spindle bore Ø105 mm Spindle nose D1-8 CAMLOCK Spindle speeds 12 speeds (36–1600 RPM) Longitudinal feed range 65 steps (0.063–2.52 mm/rev) Cross feed range 65 steps (0.027–1.07 mm/rev) Metric threads 22 ranges (1–14 mm) Imperial threads 25 ranges (28–2 TPI) Module threads 18 ranges (0.5–7 mm) DP threads 24 ranges (56–4 DP) Rapid longitudinal feed 4.5 m/min Rapid cross feed 1.9 m/min Tailstock quill diameter 75 mm Tailstock taper MT5 Maximum tailstock quill travel 150 mm Tailstock lateral adjustment ±15 mm Main motor power S1/S6 7.5 / 9 kW, 400 V Rapid feed motor power 250 W Coolant pump power 60 W Machine dimensions (L × W × H) 5700 × 1150 × 1800 mm Machine weight approx. 5300 kg (±2%) Standard Equipment 3-axis digital readout system Self-centering 3-jaw chuck, 315 mm Independent 4-jaw chuck, 400 mm Faceplate, 400 mm Rapid feed system Fixed steady rest Follow rest Two fixed centers MT5 Spindle reducing sleeve Coolant system Work lighting Chuck and tool post keys Complete set of service tools Operating manual CE Declaration of Conformity

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blaster with a 100-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the built-in pressure regulator. A water separator is also permanently installed on the blaster, which separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off system ensures safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. The pressure blaster is delivered fully operational, assembled in a space-saving mesh box. All that's required is to connect the compressed air supply and fill it with blasting media. It can be easily transported by forklift or pallet truck. A lockable aluminum box is installed for storage of protective clothing, spare parts, etc. The scope of delivery includes: SAPI "Mammut 100 L" pressure blaster 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off device Abrasive sieve Cover 10 m blast hose, fully assembled, ø 25x7 mm Silicon carbide Venturi long nozzle, diameter optionally 6 mm, 8 mm, or 10 mm RED 2 sandblasting helmet Nylon/cotton sandblasting overalls 1 pair of leather blasting gloves 10 m breathing air hose, fully assembled SAF breathing air filter/activated carbon filter Wearing parts set consisting of: 100 tear-off films for RED 2 10 inner discs for RED 2 1 blast hose coupling, 25x7 mm nylon 2 rubber seals for blast hose coupling 1 nozzle holder, 25x7 mm Grid box with blast hose holder Aluminum box Lockable Technical specifications of the pressure blaster: Precisely adjustable from 0.1 - 12 bar TÜV-certified with certificate Fixed 1" internal and external piping Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 100 l Total height: 1,130 mm Bowl diameter: 490 mm Total diameter: 900 mm Weight: approx. 75 kg Dimensions of the mesh box: Ksdpfxswc Ri Ie Ag Ujdt Length: 1,460 mm Width: 840 mm Height: 1,400 mm Total weight including all accessories: 260 kg

Condition: new, Year of construction: 2026, CORMAK 400 metal lathes is a new, improved version of the popular metal processing lathes. Among other things, the tool holder cover, spindle bearing system, new digital readout have been improved. They are suitable for production plants, workshops and tool shops. They are perfect for unit and small lot production. NEW, IMPROVED MODEL !!! high-quality and reinforced spindle bearing system new guards system compliant with CE standards the latest model of digital axis reading reinforced and modernized lathe base with drawers for tools and an extendable chip tray Characteristics of the machine REINFORCED, RIBBED SURFACE OF THE LATHE'S BED PROVIDES MAXIMUM REDUCTION OF VIBRATION, ADDITIONALLY PRECISE GRINDED, HARDENED BED DIGITAL READOUT OF THE AXIS IN STANDARD EQUIPMENT LARGE SPINDLE BORE PROVIDES OPTIMUM PERFORMANCE 52 mm THE APPROPRIATE BED WIDTH ENSURES STABLE AND PRECISE WORKING CONDITIONS MACHINE EQUIPPED WITH HIGH-QUALITY AND HARDENED SPINDLE BEARING SYSTEM EFFICIENT MACHINING THANKS TO TWO AUTOMATIC FEEDS AND EQUIPMENT WITH A ROLLER AND A DRAFT BOLT HARDENED WHEELS IN THE SPINDLE GEAR ADJUSTABLE CLUTCH OVERLOADS ON THE PULL SHAFT POSSIBILITY TO MACHINE THE FULL RANGE OF THREADS WITHOUT REPLACING THE WHEELS IN THE GUITAR FEED CHOICE LOCK: THROUGH SCREW OR SHAFT THE REMOVABLE BRIDGE ENABLES THE WORKING OF ELEMENTS WITH AN INCREASED DIAMETER RETRACTABLE CHIP DRAWER AND TOOL DRAWERS FOR BETTER AND EFFICIENT WORK Technical data MAXIMUM TURNING DIAMETER 400 mm MAXIMUM TURNING DIAMETER OVER THE BED 250 mm MAXIMUM TURNING DIAMETER IN THE SELECTION OF THE BRIDGE 520 mm TURNING LENGTH IN DEAD CENTRES 1000 mm BED WIDTH 218 mm SPINDLE END CAMLOCK D5 SPINDLE CONE MK6 SPINDLE BORE 52 mm SPINDLE ROTATION RANGE 65-1810 rpm SPINDLE SPEED NUMBER 16 ranges RANGE OF LONGITUDINAL FEED (40) 0,053 - 1,291 mm RANGE OF TRANSVERSE FEED (40) 0,011-0,276 mm THE MAXIMUM DIMENSION OF THE TOOL 20 mm x 20 mm METRIC THREAD 0,4-7 mm INCH THREAD 4-60 T.P.I. MODULAR THREAD (22) 0,4-3 mm THREAD D. P. (28) 8-84 D. P. TAILSTOCK QUILL DIAMETER 50 mm TAILSTOCK QUILL STROKE 110 mm TAILSTOCK TAPER MT4 ENGINE POWER 2,2 kW PUMP POWER 0,1 kW WEIGHT 640 kg DIMENSIONS 2000x820x1650 mm EQUIPMENT digital readout steady rest follow rest 200 mm 3-jaw chuck 200 mm 4-jaw chuck face plate 280 mm Kdedpfx Agoiz Tczj Ujt dead center MK4 x 2 reduction sleeve MK6/MK4 keys Factory new machine, under warranty For more information you can visit our web page.

Condition: new, Year of construction: 2026, The CORMAK PS12E-3000 is an industrial panel saw with a scoring unit, designed for intensive operation in woodworking plants, furniture workshops, and production facilities. It is a high-performance machine for precise processing of wood-based panels, MDF, HDF, plywood, and solid wood. Equipped with an advanced cutting system, the PS12E-3000 panel saw enables chip-free operation, even when performing complex angled formatting cuts. Main Advantages of the Machine Precise chip-free cutting – thanks to the additional scoring blade, the panel saw perfectly handles laminated boards, preventing surface damage and chipping. Large 3000 × 270 mm sliding table – the bearing-mounted carriage ensures stable material guidance while maintaining maximum cutting accuracy. Cutting width up to 1220 mm – suitable for large-format panels and oversized workpieces. Angled cutting capability (0–45°) – precise adjustment of the main blade tilt allows a wide range of woodworking applications. High-performance motor – 3.8 kW (S1) power ensures continuous and reliable operation during demanding production tasks. Thought-out ergonomics – convenient control panel, blade height locking system, and connection point for dust extraction. Construction and Technology The construction of the PS12E-3000 panel saw is based on a rigid steel frame resistant to twisting and vibration. The main worktable (800 × 385 mm) and side table (880 × 800 mm) are made from durable materials, ensuring long-term stability and reliability. The sliding carriage moves smoothly on precision guides, allowing accurate positioning and controlled movement of the workpiece. The main cutting blade with a diameter of 315 mm works together with a 100 mm scoring blade, providing excellent results when formatting panels. Blade replacement is quick and convenient thanks to the practical mounting system. Kdsdpevugc Aofx Ag Ust Precision and Work Efficiency The PS12E-3000 circular panel saw for wood provides excellent dimensional repeatability and clean cutting edges during every operation. Thanks to high rotational speeds: 4000 rpm – main blade 5800 rpm – scoring blade the machine enables fast and accurate cutting, even in demanding materials. Performance is supported by a powerful drive system and precise adjustment of cutting depth and blade angle. Applications The CORMAK PS12E-3000 panel saw is used in: furniture manufacturing and interior fitting production, professional woodworking and carpentry workshops, cutting prefabricated wood-based panels, precision sizing of structural and finishing materials. It is an ideal solution for companies looking for a machine that combines high power, accuracy, and versatility. Standard Equipment Main cutting blade 305 × 30 mm Scoring blade 90 × 20 mm Support arm and rip fence Worktable extension Mitre fence Blade angle indicator Eccentric clamp Technical Specifications Parameter Value Sliding table dimensions 3000 × 270 mm Main table dimensions 800 × 385 mm Side auxiliary table dimensions 880 × 800 mm Cutting width 1220 mm Saw blade tilt range 0–45° Cutting height at 90° 100 mm Cutting height at 45° 80 mm Maximum main blade diameter 315 mm Maximum scoring blade diameter 100 mm Main blade speed 4000 rpm Scoring blade speed 5800 rpm Motor power S6 5.3 kW / 7.1 HP Motor power S1 3.8 kW / 5.1 HP Power supply 400 V Weight 309 kg

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK FM230L1 Dust Extractor with Dust Filter The CORMAK FM230L1 with a dust filter is a modern, mobile dust extractor that combines high operating efficiency with a compact design. The use of a horizontal impeller and an advanced filtration system allows the machine not only to effectively remove sawdust and wood chips from woodworking machinery, but also to vacuum production hall floors. The machine has been designed for professional woodworking facilities as well as hobby workshops. Main Advantages of the Machine Extraction capacity of 1,000 m³/h – ensures efficient removal of wood chips and sawdust from a single workstation. Balanced WhirlWind metal impeller – quiet, stable operation and increased durability. Dust filter and plastic waste collection bag – effective separation of contaminants and cleaner air in the workshop. High negative pressure and horizontal suction system – efficient extraction of even fine dust and particles. Production hall vacuuming capability – the included wide floor nozzle expands the functionality of the machine. Compact dimensions – takes up little space in the workshop. Large wheels and ergonomic handle – easy transportation in various working conditions. Construction and Technology The heart of the FM230L1 woodworking dust extractor is a multi-blade WhirlWind series impeller mounted horizontally in a metal housing. It provides even suction pressure and smoother operation compared to standard vertical designs. The reinforced motor operates in continuous S1 duty mode, ensuring reliability even during intensive use. Additional structural supports eliminate vibration and ensure a long service life of the suction system. Precision and Operating Efficiency The FM230L1 operates at a rotational speed of 2,800 rpm, allowing efficient extraction of sawdust, wood chips, and fine dust generated by woodworking and sanding machines. The filtration system removes airborne contaminants, reducing the need for frequent cleaning and improving operator comfort. The set includes a large floor nozzle, making the machine a practical sawdust vacuum cleaner as well. Applications Craft woodworking shops and furniture manufacturing facilities Educational and school workshops Sanders, saws, milling machines, and jointers Cleaning production halls and production lines Standard Equipment Dust filter Plastic waste collection bag Floor nozzle Metal fastening clamps Lockable, bearing-mounted castor wheels Optional Equipment Ksdpfx Agjz A Ur Us Uedt Ø100 mm extraction hose Galvanized clamp Additional filter bag set Technical Specifications Specification Value Motor power (S1) 0.75 kW Motor speed 2,800 rpm Extraction capacity 1,150 m³/h Negative pressure 1,020 Pa Noise level 65 dB Bag capacity 90 l Number of bags 2 (filter + waste collection) Extraction outlet diameter 100 mm Height 1,550 mm Width 420 mm Length 800 mm Power supply 230 V Weight 27 kg The FM230L1 with dust filter is a compact and reliable woodworking dust extractor designed for everyday work with wood and wood-based materials. Choose quality, stability, and industrial-grade filtration – order today and improve working conditions in your facility!

Condition: used, Year of construction: 2010, operating hours: 40,000 h, functionality: fully functional, machine/vehicle number: 358/211/10, tank capacity: 800 l, usable tank capacity: 800 l, total length: 2,200 mm, total width: 1,800 mm, total height: 1,050 mm, overall weight: 800 kg, wall material: stainless steel, wall structure: double-walled, number of chambers: 1, manhole location: bottom, operating temperature: 130 °C, power: 40.5 kW (55.06 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, Equipment: hot water, For sale is a high-capacity, heavy-duty Jugema 800 kg (800 Liter) Industrial Tilting Bratt Pan, engineered specifically for high-volume food processing, mass catering, and central production kitchens. Built entirely from premium-grade, acid-resistant stainless steel, this exceptionally versatile machine excels at braising, stewing, boiling, frying, and reduction processes for large batches. Jugema is globally renowned for robust food processing machinery, and this machine is a true workhorse designed for decades of reliable, intensive service Kdjdpfx Agjzzdv Ne Uot

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM470 Dust Collector is a high-performance industrial sawdust extraction system designed for large woodworking workshops and industrial production facilities. Equipped with a robust construction and a multi-fan extraction system, it delivers maximum efficiency and reliability in demanding working conditions. Key Features Impressive airflow capacity of 6,800 m³/h – provides efficient extraction of sawdust and wood chips from multiple workstations simultaneously. 5.6 kW motor – three-phase 400 V power supply ensures stable and reliable continuous operation. Balanced metal impeller – guarantees smooth, quiet, and vibration-free performance. Large collection capacity with 8 × 200 L bags – reduces emptying frequency and enables uninterrupted operation. Heavy-duty steel construction – powder-coated housing provides excellent resistance to mechanical damage and corrosion. Construction and Technology The CORMAK FM470 woodworking dust collector is equipped with a durable steel fan featuring a precisely balanced impeller, ensuring stable airflow and long service life. The housing is manufactured from thick steel profiles, protecting the unit against mechanical damage and demanding workshop conditions. The bag mounting system with clamps and fastening rings allows quick installation and replacement of large fabric filter bags. The design also provides easy access for maintenance and servicing. Precision and Performance The high efficiency of the FM470 dust extraction system results from optimized fan geometry and a large filtration surface area provided by the collection bags. Stable airflow ensures effective removal of dust and chips, improving machine performance, workplace cleanliness, and operator comfort. Applications Kdjdpevu Ryrsfx Ag Ujt The FM470 is ideal for: Industrial woodworking and furniture manufacturing plants – extraction of chips from routers, planers, saws, and thickness planers. Factories and production halls requiring clean air and high-capacity dust extraction. Technical schools and educational workshops – providing a safer working environment. Mobile and central dust extraction systems – serving as a powerful industrial sawdust collector. Standard Equipment 8 fabric filter bags (200 L each) Bag mounting system (clamps and fastening rings) Optional Equipment Ø100 mm extraction hose Galvanized hose clamp Technical Specifications Specification Value Extraction capacity 6,800 m³/h Collection bag capacity 8 × 200 L Number of bags 8 Extraction inlet 1 × Ø180 mm, 4 × Ø100 mm Overall dimensions (L × W × H) 3,560 × 580 × 2,200 mm Weight 152 kg Motor power 5.6 kW Power supply 3-phase, 400 V

Condition: new, Year of construction: 2026, The CORMAK MJ45-KB4 sliding table saw is an industrial panel saw with a scoring unit, designed for precise cutting of furniture boards, plywood, and other wood-based materials. The 2600 mm sliding table and robust construction ensure repeatability and high cutting quality. Key advantages of the machine Scoring unit with a separate motor – eliminates chipping on laminates and veneers. Aluminum sliding carriage running on hardened steel guide bars – ensures rigidity and smooth feed. 2600 mm sliding table – reliable handling of large and heavy panels. Main motor 5.5 kW – consistent cutting quality in continuous operation. Tilt range 0–45° – flexibility when cutting angled components. Extendable telescopic fence up to 3100 mm – fast and repeatable settings. Rotational speeds 4000/6000 rpm (main blade) and 8000 rpm (scoring blade) – optimal adjustment to material type. Kdjdpfsywkc Dsx Ag Ust Cast iron body – vibration damping and cutting system stability. Construction and technology The design is based on a torsion-resistant cast iron body, which stabilizes the saw unit and minimizes vibrations. The aluminum carriage moves on hardened rods, ensuring long-term precision. The outrigger table facilitates handling large panels without additional support. Adjustment mechanisms with clear readouts (including angle indication on the handwheel) allow for quick and precise setup. Precision and performance The MJ45-KB4 sliding table saw ensures clean edges thanks to the 125 × 20 mm scoring blade and stable guide geometry. The cutting height range up to 90 mm at 90° and 56 mm at 45° allows processing of a wide range of formats and thicknesses. Two main blade speeds enable parameter adjustment to the material type, maintaining dimensional repeatability and reducing the need for rework. Applications The machine is dedicated to workshops and production facilities seeking a stable panel saw with a scoring unit for serial cutting of furniture and structural elements. It meets the requirements of plants where quality, dimensional accuracy, and reliability in multi-shift operation are essential. Standard equipment Scoring unit with separate drive 2600 mm sliding table on guide bars Dial indicator for blade tilt Telescopic fence up to 3100 mm (front/rear mounting on support table) User manual in Polish CE declaration of conformity Optional equipment Set of saw blades for wood and laminate Dust extraction systems Panel transport trolley Technical specifications Sliding table length: 2600 mm Cutting width: 1250 mm Saw tilt: 0–45° Cutting height at 90°: 90 mm Cutting height at 45°: 56 mm Max main blade diameter: 315 mm Max scoring blade diameter: 125 mm Main blade speed: 4000 / 6000 rpm Scoring blade speed: 8000 rpm Main motor power (continuous S1/S6): 5.5 kW Scoring motor power (continuous S1/S6): 0.75 kW Weight: 650 kg

Year of construction: 2014, operating hours: 3,100 h, condition: excellent (used), functionality: limited functionality, MYDATA MY500JP Jet Printer 2014 in excellent condition with exceptionally low operating hours (approximately 3,100). Kept and used in a clean environment. Complete system supplied with offline programming PC, MYCAM JP software, 2D Inspection & Repair option, SMT Adhesive option, manual load tables and associated documentation. There are also some spares included which we can bundle into a sale deal for an appropriate price. Visits/Inspection are welcome by appointment. An excellent opportunity to acquire a MY500JP suitable for high-mix, low-to-medium volume SMT production. Kjdpfx Agezlx E Ts Usdt The machine exhibits an intermittent issue affecting movement on the X-axis during camera positioning. On occasion, a slight jitter or vibration is observed, which can prevent the vision system from reliably locating the PCB fiducial during initial board loading or machine initialisation. The fault is intermittent and does not occur consistently. Most of the time, reloading the PCB allows operation to continue normally. Occasionally, a machine restart is required. The root cause has not been determined, but the issue appears to be associated with the X-axis motion control system. Potential areas for investigation include the servo amplifier (drive), encoder, encoder cable or other associated motion control components. Despite this intermittent behaviour, the machine was used in active production of complex PCB assemblies, including fine-pitch BGA boards, for approximately 12 months prior to being replaced as part of an equipment upgrade. The machine is therefore offered for sale on the understanding that diagnosis and repair of this intermittent fault is outstanding. Included: MYDATA MY500JP (2014) Approx. 3,100 operating hours MYCAM JP offline programming PC and software 2D Inspection and Repair option SMT Adhesive option Manual loading Technical documentation 4pcs AE04 ejectors Bundle of spare parts Not included: Solder paste Cassette (Holding Assembly), Solder paste, Purge Gel, Filter boxes Conveyors

Condition: new, Year of construction: 2026, The CORMAK ZX 7055 VARIO DRO milling and drilling machine is a high-performance universal machine designed for drilling, milling, and tapping operations in steel and cast iron. Its robust cast-iron construction, continuously variable spindle speed control in two ranges, and digital position readout system ensure high accuracy and repeatability in single-piece and small-batch production. Main Advantages of the Machine Rigid cast-iron base and column – provide excellent stability during machining of demanding workpieces, reduce vibrations, and extend tool life. Continuously variable spindle speed control in two ranges: Low range: 75–438 rpm High range: 438–2500 rpm Allows optimal selection of cutting parameters depending on tool diameter and material. 2-axis digital readout system (DRO) – enables fast and accurate positioning while reducing setup time and eliminating reading errors from manual scales. Automatic spindle feed – ensures smooth cutting performance and reduces the risk of drill breakage during deep drilling operations. Thread cutting function – after reaching the preset tapping depth, the spindle automatically reverses direction. Ground gears – provide quiet transmission operation and stable spindle torque. Dovetail slideways on machine axes – ensure precise table movement and accurate geometry. Rotating head ±90° with height adjustment – allows easy execution of angled machining operations, chamfers, and undercuts. Left/right spindle rotation – enables safe tapping and tool withdrawal. Efficient cooling system – effectively removes heat from the cutting zone, prevents overheating of tools and material, improves machining accuracy, and extends cutting tool life. The core of the machine is a heavy cast-iron structure with wide guideways, minimizing deflection during face and end milling operations. The large cross table provides a spacious working area and features a precisely ground surface to ensure accurate workpiece positioning. The spindle with an MK4 taper is driven by an S1/S6 1.5/1.8 kW motor with variable speed control. The integrated cooling system stabilizes the cutting temperature and improves the quality of machined surfaces. The combination of a 2-axis DRO system, ground gears, and rigid guideways provides excellent dimensional repeatability and high surface finish quality. The automatic spindle feed and two-speed spindle range allow optimal machining parameters for: drilling in steel up to Ø32 mm, drilling in cast iron up to Ø45 mm, face milling up to Ø80 mm, end milling up to Ø28 mm. Standard Equipment Variable spindle speed control 2-axis digital readout system (DRO) Kdodpfx Aoyapyrsg Ust Ø80 mm milling cutter head with inserts Drill chuck Cooling system Technical Specifications Parameter Value Maximum drilling capacity – cast iron (HT200) 45 mm Maximum drilling capacity – steel 32 mm Maximum face milling diameter 80 mm Maximum end milling diameter 28 mm Working table dimensions 820 × 240 mm Table travel (X/Y) 595 / 185 mm Maximum tapping capacity M24 Spindle taper MK4 Motor power (S1/S6) 1.5 / 1.8 kW Low spindle speed range 75–438 rpm High spindle speed range 438–2500 rpm Spindle travel – manual 107 mm Spindle travel – automatic 100 mm Distance spindle axis to column surface 250 mm Maximum distance spindle nose to work table 445 mm Net weight 350 kg Overall dimensions 1084 × 924 × 1550 mm Height with base 2150 mm

Condition: used, Year of construction: 2015, operating hours: 17,260 h, functionality: fully functional, machine/vehicle number: 1121106, rotational speed (max.): 15,000 rpm, spindle nose: BT40, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Haas 750SS 5 Axis Milling Machine Machine built 2015 and has been well maintained. Only making Aluminium components. Manufacturing parts for the motorcycle market. 5-axis machining is an effective means to reduce setups and increase accuracy for multi-sided and complex parts. The Haas UMC Series universal machining centres are cost-effective solutions for 3+2 machining and simultaneous 5-axis machining. The UMC-750SS has an integrated high-speed, dual-axis trunnion table with a 500 mm diameter platter that features standard T-slots and a precision pilot bore for fixturing versatility. The trunnion provides +120 and -35 degrees of tilt and 360 degrees of rotation to provide excellent tool clearance and large part capacity. • 5-axis simultaneous machining • Powerful inline direct-drive spindle • High-speed trunnion table • Thru spindle coolant, bed wash and flood coolant • Swarf Conveyor BT40 Spindle with spindle speed up to 15,000 rpm 39 Tool carousel, with pre select. Ksdpfozic Tpjx Ag Uodt Tool probe and Tool Setting function The machine is still in daily use, the hours will increase as a result. Viewing by prior arrangement. Buyer to arrange collection at their own expense. Price is £55,000 plus Vat where applicable. Sold Ex Works

Condition: excellent (used), Year of construction: 2009, Bernardo FM 45 V drilling and milling machine. The FM 45 V drilling and milling machine offers an optimal price-performance ratio thanks to the standard spindle feed. The dovetail guide of the gear head ensures maximum precision and stability. Drilling capacity in steel 32 mm Drilling capacity in cast iron 40 mm Throat 260 mm Spindle speed (12) 50 - 2520 rpm Spindle mount MK 4 Quill stroke 120 mm Quill feed (3) 0.12 / 0.19 / 0.26 mm/rev Table size 820 x 240 mm Distance spindle / table 40 - 485 mm Travel path (x / y) 550 / 190 mm Height adjustment of milling head 400 mm T-slot size 14 mm T-slot distance 55 mm Motor output power S1 100% 0.85 / 1.1 kW (400 V) Motor input power S6 40% 1.1 / 1.5 kW (400 V) Kdjdpfx Aevutw Heg Ust Machine dimensions (W x D x H) 1150 x 850 x 1450 mm Weight approx. 285 kg Standard with automatic spindle feed and thread cutting device Large speed range 50 - 2520 rpm (12 levels) Dovetail guide for x, y and z axes, adjustable via wedge strips Versatile application options, slot milling, face milling, boring,.... Solid large cross table, precisely surface-machined Milling: spindle feed via handwheel Drilling: spindle feed via handwheel High-quality aluminum motor, designed for continuous operation Stable and vibration-free cast design Simple and quick speed change using a gear lever Pivoting milling head for angle drilling, milling bevels, etc. Location: from stock 54634 Bitburg - available at short notice -

Condition: new, Year of construction: 2026, CORMAK TS-125 The CORMAK TS-125 is a precision tool grinder designed for comprehensive sharpening and reconditioning of cutting tools. It enables the machining of drills, cylindrical milling cutters, lathe tools and many other tools. Its solid construction, wide range of adjustments and extensive standard equipment make it a machine designed for intensive use in industrial plants, tool rooms and maintenance workshops. Main Advantages of the Machine Universal application – grinding of twist drills, milling cutters, lathe tools and cylindrical surfaces. Precise adjustment – swiveling grinding head adjustable in two planes: +40°/-40° vertically and +50°/-50° horizontally. Stable construction – a massive base effectively dampening vibrations, ensuring high grinding quality. Drive unit with a 3-jaw chuck (Ø80 mm) – enables machining of cylindrical surfaces and rotary components. Twist drill sharpening range: Ø5–32 mm – ideal for most tools used in industry. Longitudinal travel of 320 mm and cross travel of 170 mm – a large machining range with the machine's compact dimensions. Complete standard equipment – readiness to work with various types of tools without the need for additional purchases. Construction and Technology The CORMAK TS-125 tool grinder has been designed with the highest possible stability and structural rigidity in mind. The worktable with a surface area of 535 × 130 mm and precise guidance ensures smooth movement along both axes. The grinding head, driven by a motor with a power of 0.18 kW and a speed of 2,800 rpm, can be adjusted in two planes, which enables grinding at any angle. Thanks to the use of holders and arbors with different diameters, it is possible to precisely mount various types of tools. Precision and Work Efficiency The machine provides high repeatability and sharpening precision even during serial production and intensive use. The appropriate geometry of the guideways, the quality of the components and the set of grinding wheels (including ring and diamond grinding wheels) enable the achievement of cutting-edge surfaces with a high-quality finish. A milling cutter grinder and drill sharpener in a single machine body is a solution that eliminates the need to invest in multiple separate machines. Standard Equipment Stable base with a tool cabinet 2 tailstocks for positioning the workpieces Table travel stops – precise control of the travel range 2 standard 60° centers and 2 half-centers, 60° 3 grinding wheels: ring grinding wheel 125 × 45 × 32 mm, diamond grinding wheel 125 × 32 × 32 mm, conventional grinding wheel 125 × 25 × 32 mm Grinding disc Drive unit with a 3-jaw chuck (Ø80 mm) Twist drill sharpening attachment Lathe tool holder Arbors for mounting milling cutters: Ø16, Ø22, Ø32 mm Diamond sharpening stone Complete set of operating tools Kdedpevugynefx Ag Ust Technical Specifications Maximum workpiece diameter — 175 mm Distance between centers — 320 mm Table size — 535 × 130 mm Longitudinal table travel — 320 mm Cross table travel — 170 mm Grinding head – vertical inclination — -40° to +40° Grinding head – horizontal inclination — -50° to +50° Grinding head speed — 2,800 rpm Motor power — 0.18 kW Weight — 266 kg

Condition: new, Year of construction: 2026, Universal Metal Lathe CORMAK 410 × 1500 mm The CORMAK 410 × 1500 universal conventional metal lathe is a professional machine designed for precision machining of shafts, bushings, threads, cylindrical surfaces, and tapered surfaces. Thanks to its large distance between centers, rigid bed construction, and extended standard equipment package — including a 20 × 20 mm indexable turning tool set and a precision MT4 live center — it provides a complete machining solution for industrial plants and professional workshops. Main Advantages of the Machine Large 1500 mm distance between centers – enables machining of long shafts and large-length components. Rigid cast iron bed and base construction – hardened and ground working surfaces minimize vibration and ensure high machining accuracy. Large 52 mm spindle bore – allows machining of pipes and workpieces with larger diameters. Precision spindle bearing system – reinforced spindle support guarantees long-term accuracy and reliable operation. Removable bed gap section – enables machining of components with diameters up to 580 mm. 3-axis digital readout system – optical scales provide accurate control of carriage positioning. 16 spindle speed ranges – allows precise cutting parameter selection within a range of 45–1800 RPM. Direct thread selection system – enables machining of a wide range of metric, imperial, module, and DP threads without changing gears. Standard Equipment Set of turning tools 20 × 20 mm – 7 pcs. (with indexable inserts) Precision live center MT4 6 vibration isolators 3-axis digital readout system (optical scales) 3-jaw chuck 200 mm with complete set of jaws 4-jaw independent chuck 250 mm Faceplate 350 mm Fixed and follow steady rests Fixed center MT4 Kdsdpfsrh E Smox Ag Uot Spindle reducing sleeve MK6/MK4 Complete set of change gears Coolant system with pump Work lighting Lubricator, keys, and service tools Safety guards compliant with CE standards Operating manual and CE Declaration of Conformity Technical Specifications Parameter Value 3-jaw chuck 200 mm Maximum turning diameter over bed 410 mm Maximum turning diameter over cross slide 255 mm Maximum turning diameter in bed gap 580 mm Bed gap length 190 mm Distance between centers 1500 mm Center height 205 mm Compound slide travel 145 mm Cross slide travel 225 mm Longitudinal carriage travel 1150 mm Bed width 250 mm Spindle bore 52 mm Spindle nose D1-6 CAMLOCK Spindle taper MT6 Tool post dimensions 100 × 100 × 32 mm Maximum tool size 20 × 20 mm Spindle speeds 16 ranges, 45–1800 RPM Available spindle speeds 45, 70, 90, 108, 140, 165, 215, 255, 330, 385, 510, 585, 770, 900, 1170, 1800 RPM Metric threads 42 ranges, 0.2–14 mm/rev Imperial threads 42 ranges, 2–72 TPI Module threads 18 ranges, 0.3–3.5 mm DP threads 21 ranges, 8–44 DP Longitudinal feeds 17 ranges, 0.05–1.7 mm/rev Cross feeds 17 ranges, 0.025–0.85 mm/rev Tailstock quill diameter 50 mm Tailstock quill travel 120 mm Tailstock taper MT4 Main motor power (S1/S6) 2.2/2.64 kW or 3.3/3.96 kW Coolant pump power 0.1 / 0.12 kW Machine dimensions (L × W × H) 2440 × 900 × 1660 mm Net weight 1800 kg

Condition: used, Year of construction: 2025, operating hours: 6 h, power: 82 kW (111.49 HP), Operating hours: 6, First registration: 06/30/2026. New tractor with dealer’s temporary registration before handover. Standard equipment / technical data. Engine: Rated power (ISO) 82 / 110 kW / hp at 2200 rpm, Max. power 86/115 kW/hp at 2000 rpm, Max. torque 460 Nm at 1600 rpm, Manufacturer / Type: Agco Power / AP 44MBTN-D5, Low-emission engine, 4 cylinders / 4.4 l, 4 valves, STAGE 5, Controlled turbocharger, SCR catalyst, DOC - diesel oxidation catalyst, SCR particulate catalyst, Hood - one-piece, foldable, Exhaust on the right side in front of the cab, Fuel tank capacity 198 liters / AdBlue 18 liters. Transmission / PTO: 16/16-speed Dyna-4, SpeedMatching, 40 km/h, PowerControl control on the left with load-shifting reversing gear, 4-stage load shifting, Continuously cooled wet clutches with independent lubrication system, Double PTO shaft: 540 / 540E / 1000, Switching electrically in the cab, PTO START / STOP button on the rear, left fender. Hydraulics / lifting system: Open system (OpenCenter) 58 l/min total flow rate, max. 200 bar, 2 control valves with hydraulic couplings: 1x single / double acting, mechanical remote control + 1x single / double acting, neutral, SST, Quick coupler Cat. 3 with balls and catch cups Cat. 3/2, Lower link control, 5,200 daN maximum lifting force, 2 external lifting cylinders, Adjustable lifting struts on both sides and 2 side stabilizers, EHR with external control on both fenders. Electrical equipment: Thermostart, 120 A alternator, Battery disconnect switch, electrical, Power supply (12 Volt) for external devices with connector. Axles / additional weights: Rear axle ND with flange hub, Oil-cooled disc brakes, Quick-adjusting automatic trailer hitch, Fender outer width rear 2.00 m, without extensions, Front weight carrier with integrated drawbar and drawbar pin. Cab: Vibration-damped standard cab with standard roof, ventilation and heating, air conditioning, Integrated safety frame with tinted glazing, Doors on both sides with safety steps, Steering column adjustable in height and inclination, Air-suspended driver’s seat with armrests, rotating adapter, seat belt, 2 large telescopic exterior & wide-angle mirrors, Interior mirror, Analog-digital instrument panel (SIS), Radio preparation with antenna and speakers, 4 work lights front and rear on the cab roof, 2 driving lights in the hood and on the handrails, 2 work lights on the rear fenders, Rear window wiper / washer system, All-wheel drive front axle with switchable differential lock. Special equipment: With fuel tank protection, PowerControl & Brake on Neutral (clutch effect), 100 l/min, Open Center hydraulic system, Oil flow coupling (58+42 l/min), Leakage oil collector on quick couplers, 3 control valves: 1x MR, double acting, EA, SST + 1x double acting, neutral, SST + 1x double acting, neutral, SST + free return, 2.5t front lift, 1 hydraulic line set, electrical socket, 480/70R38 ADJ Ø1.69m & 380/70R28 ADJ, Rear fender extensions - wide, Air conditioning, Cab with mechanical suspension, Telescopic exterior & wide-angle mirrors, Passenger / instructor seat with belt, Air-suspended driver’s seat, automatic adjustment with seat belt, rotating adapter and armrests, Rear window wiper / washer system, Battery. Ksdpfx Aeyvmq Ieg Ujdt

Condition: new, functionality: fully functional, Year of construction: 2026, CORMAK MM3166P 400V Drum Roller Sander is an advanced through-feed sanding machine designed for precise sanding of solid wood, MDF boards, veneer, and other woodworking materials. Equipped with two sanding drums and a 635 mm working width, this model is an excellent solution for serial production and facilities requiring high-quality surface finishing. Main advantages of the machine Two sanding drums with a diameter of 150 mm ensure uniform sanding without the risk of burns or scratches. Conveyor belt system provides smooth transport of the workpiece and stable guidance under the sanding unit. Adjustable feed speed from 1.8–7.3 m/min allows the operator to adapt the working speed to the type of processed material. Dust extraction system with two Ø100 mm ports ensures efficient removal of chips and dust, improving working comfort and extending the service life of components. Solid industrial construction weighing 220 kg provides excellent stability even during intensive operation. Construction and technology The CORMAK MM3166P has been designed with stability, precision, and durability in mind. The main steel frame provides resistance to vibration and deformation. The 2.2 kW main motor drives the sanding rollers at 1800 rpm, enabling efficient removal of excess material, even when processing hard wood species. The 120 W feed motor works together with the adjustable speed control system, allowing the operator to precisely control the sanding process. The large belt width of 635 mm makes it possible to process wide components in a single pass, reducing operating time. Precision and working efficiency Kdjdsxfhh Dspfx Ag Uet The machine provides accurate control of the workpiece thickness in the range of 7 to 130 mm. The sanding belt speed of 14 m/s ensures a high-quality surface finish without overheating or burning the material. The roller diameter and working roller length (635 mm) provide even contact pressure and a consistent final sanding effect. Applications The CORMAK MM3166P drum roller sander is widely used in: woodworking plants producing stairs, doors, and furniture fronts, factories manufacturing wooden components and panel materials, workshops specializing in wood and veneer restoration, solid wood and veneered furniture production facilities, production of large-area components where repeatability and sanding quality are essential. Standard equipment Two sanding rollers Ø150 mm Conveyor belt with a width of 635 mm Main motor 2.2 kW Feed motor 120 W Dust extraction system with Ø100 mm ports Adjustable table height control Optional equipment Sanding belts with different grit sizes Dust and chip extraction system Mobile base Technical specifications Parameter Value Belt length 800 mm Belt width 635 mm Radius [R] 120 Maximum material thickness 130 mm Main motor power 2.2 kW Voltage 400 V Frequency 50 Hz Speed 1800 rpm Feed motor power 120 W Feed speed 1.8–7.3 m/min Dust extraction port diameter 100 mm Weight (net/gross) 220 / 260 kg Machine height 1113 mm Machine width (side view) 1100 mm Machine width (top view) 1060 mm Roller length 635 mm

Condition: used, For inquiries regarding the vibratory plate, Mr. Herden will be happy to assist you (by phone). WEBER CR 8 MDM Hatz Diesel Vibratory Plate / New machine / in stock & immediately available Sales price: €10,790.00 net / €12,840.10 gross 3-year warranty Shipping available. The reversible soil compactors of the CR series excel with powerful compaction performance and maximum efficiency. They are the first choice for compaction work ranging from conventional road and civil engineering to paving applications. Balanced running characteristics, smooth operation, and low hand-arm vibrations ensure high operating comfort. CR 8 – The new top class: powerful, robust, and reliable: Kdsdpfsym I Hwjx Ag Ujt - Infinitely variable forward and reverse movement - Hydraulic shift for throttle cable and hydraulic switching integrated and protected within the guide bar - Low hand-arm vibrations - Fatigue-free operation thanks to height-adjustable guide bar - Protection of machine and engine through protective frame and fully enclosed engine cover - Reduced maintenance thanks to the self-tensioning centrifugal clutch - Easy service access as all maintenance elements are easily reachable - Safe and quick loading with a large, foldable lifting eye - Secure lashing for transport thanks to additional eyes on the engine console - Enhanced operator comfort with electric start and hour meter, including engine protection - Areas of use: road and civil engineering, trench construction, substructure for paving works, and compaction of sand, gravel, or crushed stone Technical Data Engine: Hatz Diesel Max engine power: 10.3 kW (14.1 HP) Weight: 605 kg Centrifugal force: 75 kN Frequency: 67.5 Hz Working width: 70 cm On request, we can also provide a financing offer. We are an official sales and service partner for: - Westtech - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Seppi M. - Magni telescopic handlers - JCB construction machinery - Mercedes-Benz - Iveco With 800 used vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Weber MT range for you! Errors and prior sale excepted. = Additional Information = New: Yes Engine brand: Hatz Contact Marius Herden for further information.