Used Lasagna Sheet Inserter for sale (9,771)

Condition: used, Year of construction: 2021, functionality: fully functional, overall weight: 26,000 kg, Trumpf TruBend Center 5030 Bjdpfx Asy E N Hksl Ijlg

Year of construction: 1999, condition: used, End sheet tipping machine Hunkeler VEA 520 KS - HHS Year: 1999 Description: - Offline production - Photocell protection Bledpfx Ajx Eblpol Isg - Cold glue: HHS C-210 (nozzle) - Hotmelt - Premelter: Robatech Concept 4/2 - Inserting - End sheet tipping - Pressing station - Delivery Max. mechanical speed: up to 8.400 cycles/h Outside gluing max. size: 520 x 310 mm Outside gluing min. size: 100 x 70 mm Inside gluing (inserting) max. size: 360 x 260 mm

Condition: used, Envelope inserting machine Neopost (Quadient) DS200 Bljdpeyttidofx Al Iog Configuration: DS-200 inserting system Tower Feeder 2 with reading Insert feeder Insert feeder with reading Output conveyor belt Machine under continuous maintenance contract until 31.1.2026! Last service in 12/2025! Low operating hours.

Condition: new, Year of construction: 2026, Empty weight: 2.500 kg General condition: very good Technical condition: very good Visual appearance: very good Reference number: 3 Fits to following machines: 18-35ton Delivery terms: EXW Production country: KR Please contact Ö. Inalkac for more information We offer you new AJCE AVH30ST Side Grip type Vibro Hammer/ Sheetpile Driver/ SPUNDWAND RAMMGERÄTE/ Sheetpiledriver/ Damwand trilblok/ Martinete vibratorio/ Stroj za vibriranje pilota/ Bate estaca vibratória/ Wibracyjny kafar/Värähtelevä paalutuskone. AVAILABLE FROM NETHERLANDS WAREHOUSE! IN STOCK! DISPONIBLE DEPUIS ENTREPÔT PAYS-BAS! EN STOCK! ERHÄLTLICH IM NIEDERLANDE-LAGER! AUF LAGER! Bjdpfjq Ixukjx Al Ielg DISPONIBLE DESDE PAÍSES BAJOS ALMACÉN! EN STOCK! HOLLANDIA RAKTÁRBÓL ELÉRHETŐ! RAKTÁRON! DOSTUPNO IZ NIZOZEMSKOG SKLADIŠTA! NA LAGERU! Excavator: 18-30TON Weight: 2400 kg Working pressure: 180~ 200Bar Oilflow: 200 l/min Centrifugal Force : 450 kN Frequency: 2700 rpm Eccentric moment: 4 kgm AVH30ST is Robotic Pile Drivers enabling you to drive Sheet Piles, Steel Tubes,Timber Piles, H,I Beams Cheaper , Solar Pile, Safer, Quicker than traditional Pile 30ST is Robotic Pile Drivers with Side Grip and bottom clamp picks up the piles and turn to desired position adjusting the tilt and start driving the pile . ADVANTAGES: ◉ Drive steel sheet piles, steel tubes, timber piles, H-I Beams. ◉ No manpower needed except excavator operator resulting less cost. ◉ Quick change of hands suiting your pile type and size. ◉ Special design resulting, no over heating problem.

Condition: new, Year of construction: 2026, Weights Empty weight: 3.700 kg Functional CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Identification Reference number: 2 Other information Fits to following machines: 33-50ton Delivery terms: EXW Production country: KR Additional information Please contact Ö. Inalkac for more information We offer you new AJCE AVH40ST+ Side Grip type Vibro Hammer/ Sheetpile Driver/ SPUNDWAND RAMMGERÄTE/ Sheetpiledriver/ Damwand trilblok/ Martinete vibratorio/ Stroj za vibriranje pilota/ Bate estaca vibratória/ Wibracyjny kafar/Värähtelevä paalutuskone. AVH40ST+ is availbale with 3 types of changeable side clamps! AVAILABLE FROM NETHERLANDS WAREHOUSE! IN STOCK! DISPONIBLE DEPUIS ENTREPÔT PAYS-BAS! EN STOCK! ERHÄLTLICH IM NIEDERLANDE-LAGER! AUF LAGER! DISPONIBLE DESDE PAÍSES BAJOS ALMACÉN! EN STOCK! HOLLANDIA RAKTÁRBÓL ELÉRHETŐ! RAKTÁRON! DOSTUPNO IZ NIZOZEMSKOG SKLADIŠTA! NA LAGERU! Excavator: 33-50TON Weight: 3400 kg (without mounting cap) Working pressure: 250~ 270Bar Oil flow: 180-240 l/min Centrifugal Force : 1000kN Frequency: 2700 rpm Eccentric moment: 10 kgm AVH40ST+ is Robotic Pile Drivers enabling you to drive Sheet Piles, Steel Tubes,Timber Piles, H/I-Beams, solar pile, and therefore cheaper, safer, quicker than traditional Pile 40ST+ is Robotic Pile Drivers with Side Grip and bottom clamp picks up the piles and turn to desired position adjusting the tilt and start driving the pile . ADVANTAGES: ◉ Drive steel sheet piles, steel tubes, timber piles, H-I Beams. ◉ No manpower needed except excavator operator resulting less cost. ◉ Quick change of hands suiting your pile type and size. ◉ Special design resulting, no over heating problem. Bedpfx Aloym Abvo Islg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, machine/vehicle number: 25498, roller (bottom) diameter: 320 mm, roller (top) diameter: 320 mm, side roll diameter: 260 mm, working width: 2,070 mm, sheet thickness (max.): 25 mm, TECHNICAL DETAILS Blsdpfx Aljygw Ike Iog Sheet width: 2,070 mm Sheet thickness: 25 mm Bending capacity: 18 mm Top roller diameter: 320 mm Side roller diameter: 260 mm Lower roller diameter: 320 mm MACHINE DETAILS Total power supply: 26 kW Dimensions & Weight Space requirement: approx. 4,700 x 2,000 x 2,200 mm Machine weight: approx. 8,100 kg EQUIPMENT Hydraulic lateral roller adjustment Conical bending device 2 driven rollers Hardened rollers Hydraulic drop-end bearing Mobile control panel Foot switch Safety device CE marking

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, machine/vehicle number: 20021, working width: 2,100 mm, bending angle (max.): 150 °, sheet thickness (max.): 3 mm, distance between stands: 2,450 mm, opening stroke: 160 mm, TECHNICAL DETAILS Sheet width: 2,100 mm Sheet thickness: 3.0 mm Frame width: 2,450 mm Opening width: 160 mm Max bending angle: 150° Bledoygw Haepfx Al Isg Backgauge - adjustable: 6.0 - 1,000 mm Control: CNC MACHINE DETAILS Total power requirement: 5.37 kW Dimensions: 3,250 x 2,450 x 2,100 mm Machine weight: approx. 3,850 kg EQUIPMENT - ERBEND 15.6" CNC control panel - Electric backgauge from 6.0 - 1,000 mm - Material support table with ball rollers - Servo motor drive - LED machine lighting - 1x 30 upper tool - radius 1.0 mm - 1x bending rail 15 mm - 1x bending rail 25 mm - Electric safety device at the front (light curtains) - Mobile foot control - Operating manual - CE declaration SPECIAL ACCESSORIES - Divided Geifu upper tool, height = 90 mm - CNC electric motorized adjustment of lower beam - Manual crowning of the bending beam

Condition: good (used), functionality: fully functional, 1st station: deburring of sheet metal edges, 2nd station: deburring of notches and outer radii, with VA brushes; maximum sheet thickness: 5 mm Blodpfeyyahbex Al Ijg

Condition: new, functionality: fully functional, Year of construction: 2026, Foot pedal Thickness of bending beam – 15 mm Roller shear (optionally available) Bending capacity - 1.0 mm Working width - 2050 mm Blodpfx Alsy Dr Ets Iog Weight - 400 kg Accessories - roller shear (up to 1.0 mm)

Condition: excellent (used), End mill, indexable insert milling cutter, hedgehog cutter, tool holder, milling holder, milling tool -Diameter: 80 mm -Milling height: 75 mm -Recording: SK50 -Manufacturer: Hoffmann -Type: KRE80-321 Bodpfsyhcg Ujx Al Iolg -Order No.: 229.810.00 -Weight: 7.8 kg

Condition: like new (used), Shell end mill, indexable insert mill, hedgehog mill, tool holder, milling holder, milling tool -Diameter: 80 mm -Milling height: 75 mm Bodpfxjcwb Nfs Al Ijlg -Adjustment: SK50 -Manufacturer: WIDIA -Type: 06306 Widax M30 -Number: 3x milling cutters available -Price: per piece -Dimensions: 224/100/H100 mm -Weight: 5.6 kg

Condition: good (used), Code: 0072 Brand: T.O.P. ITALIA Model: FS 850 - CE Standard Drilling and inserting gluing machine + dowel pins on horizontal workpieces for furniture, custom-made furniture, kitchens, bathroom furniture - CE Standard - Year 2018 Technical data: Blsdpfx Aoyv Inzol Isg Maxworkable length mm 1600 Max workable height 850 Panel thickness mm 8 - 50 Independent drilling aggregate: Rotation speed 6000-18000 rpm - Max drilling depth mm 35 - Drilling depth adjustment - Hole cleaning system Glue + dowel insertion unit: Dowel dimensions mm 8 x 30 - Max dowel protrusion 15 mm Glue and water system: Container for automatic glue feeding and system cleaning Feeder for automatic pin loading Numerical control and operator interface: Albatros numerical control for 4-axis control - Touch screen supervisor PC - Monitor 12" TFT - Windows operating system - Parametric CAD 3D TPAEdi32 Compressed air 6 bar Overall dimensions mm 1800 x 1900 x 2100 h Weight kg 500

Condition: like new (used), functionality: fully functional, Year of construction: 2023, machine/vehicle number: 959, We offer this used LCM PRIMA PRIMA INSERTER MAXI 450 machine, year of manufacture 2023. Manufacturer: LCM Divisione Macchine Type: PRIMA Serial number: 959 Year of manufacture: 2023 Condition: used – like new Availability: immediately Bsdpfx Asy Dax Ijl Islg The machine is in virtually perfect condition – it has only been used for the production of a few prototypes, resulting in minimal wear. All components operate flawlessly, with no signs of use. If you have any questions or need additional information, please contact us by message or phone.

Condition: used, Single-column eccentric press WEINGARTEN type ARP 100 Machine no. No. 122481 Year of construction 1984 Pressure capacity 100 ton. throat 400 mm Table size 920 x 660 mm ram surface 700 x 450 mm Rear upright width 735 mm Stroke adjustment 20 - 160 mm Plunger adjustment 80 mm Installation height with 160 mm stroke max. 355 mm (without intermediate table top) Installation height with 20 mm stroke max. 425 mm (without intermediate table plate) Stroke rate 60 strokes/min. Table surface intermediate table top 920 x 610 mm Thickness of intermediate table top 90 mm Hole in intermediate table top Ø 210 / 180 mm Through-hole in machine table Ø 210 / 180 mm Table height above floor 800 mm (without intermediate table top) T-slot width in table and ram 22 mm Clamping pin bore 50 mm Motor power 11 kW Mains connection 400 Volt, 50 Hz - Hydraulic overload protection in ram - ORTLINGHAUS pneumatic clutch/brake combination - Electromotive ram adjustment with counter - Clamping pin bore with clamping piece - Front crankshaft support bearing - Gear reduction gears in closed oil bath gearbox - Two pneumatic tappet compensation cylinders - WOERNER automatic central grease lubrication - Lift release via electric foot switch or two-hand control panel - Electrical control cabinet permanently attached to the machine - Operating instructions and circuit diagram - UVV for manual insertion work Bjdpfx Alju Rwa Is Ijlg Space requirement L x W x H 2200 x 1600 x 3250 mm Weight 8.3 tons Good condition

Condition: used, Swing cut guillotine shears KÖLLSCHEN type BSK 2000/2 No. 69 1307 Year of manufacture 1969 Cutting length 2000 mm Cutting thickness 2 mm Blodpfsifu Ansx Al Ieg Stand projection 90 mm Working height 920 mm Mains connection 380 Volt, 50 Hz Motor power 4 kW - Drive via geared motor with brake and crankshaft - Mechanical sheet holder - Manual back gauge 500 mm - fence adjustment via 2 handwheels, at the rear on the back gauge guide with scale - front side stop left 720 mm - electric foot switch - manual central lubrication - Control cabinet on the machine - Machine stands on 4 swinging elements, approx. 100 mm height Space requirement L x W x H 2800 x 1700 x 1450 mm weight 2300 kg good condition

Condition: used, Guillotine shear, sheet metal guillotine DIGEP type OL 3 Workshop-refurbished guillotine shear Serial no.: 1312 Year of manufacture: 1977 Cutting length: 1250 mm (nominal cutting length) Max. cutting length: 1300 mm Cutting thickness at 450 N/mm²: 3 mm Simple backgauge: 500 mm Frame depth: 200 mm Cutting angle: 2° Strokes at full cutting length: max. 50 strokes/min Working height: 860 mm Motor power: 2.2 kW Bsdpfxolpkcnj Al Iolg Main connection: 380 Volt, 50 Hz - LED cutting area lighting - Simple backgauge with manual adjustment - Mechanical foot switch - Front angular stop left - 1 piece front sheet support 300 mm Dimensions (L x W x H): 1660 x 1350 x 1200 mm Weight: 1600 kg Good condition

Condition: used, 2-axis removal machine, inserter, servo robot, workpiece gripper, pick-and-place machine, removal robot Removal device, handling device for presses, lathes, etc. GETECHA Type GL-20S No. 13836 Year of manufacture 10/2003 Z-axis travel 1900 mm Travel distance Y-axis 250 mm Travel speed Z-axis max. 1100 mm/sec. Travel speed Y-axis max. 227 mm/sec. infinitely variable travel speed in Y- and Z-axis via SMB servomotors - precise axis movement via linear guides - epis control system - Control panel opposite - Control for conveyor belt, gripper magnets, bead breaker cylinder, vacuum, gripper - External monitoring inputs for emergency stop, press open, press closed, safety doors closed, automatic - Mounted gripper with 3 lifting magnets, 3 pneumatic push-off cylinders (30 mm stroke), 1 pneumatic clamping cylinder (40 mm stroke) - Operating hours 25998 hrs. The system was used as an inserter/removal device on a press. Blsdpfx Aoharwysl Isg Space requirement L x W x H 2900 x 1800 x 2000 mm Weight approx. 800 kg good condition

Condition: used, Pneumatic folding and edging machine FASTI Type 606 - 11 - 1.0 Folding machine for pre-forming sheet metal seams For producing a seam bend Seam bending machine for thin sheet metal as an alternative to a press brake Blodpfedzqbljx Al Iog Serial no.: 9166002 Year of manufacture: 1991 Working length: 1100 mm Material thickness at 45 kg/mm²: 1 mm Compressed air requirement: 6 bar - pneumatic foot switch - roller adjustment via threaded clamping screws Required space (L x W x H): 1600 x 300 x 1050 mm Weight: approx. 250 kg Good condition The seam is the doubling over of the sheet metal edge (1x folded over) to increase the stiffness of the sheet. By folding over, a rounded edge is created, reducing the risk of injury from sharp sheet edges. Ideal for metalworking applications such as sheet metal furniture, cladding panels, or for the production of ventilation and silencer components.

Condition: used, Hand - swing bending machine KRAMER type AMS 650 x 1,5 Hand swivel bending machine, press brake year of construction approx. 1985 working length 650 mm sheet thickness at 40 kg/mm2 1,5 mm upper beam opening approx. 60 mm bending beam adjustment ca- 0-25 mm bending angle 0-180 Bledpfedzqaaox Al Isg - Upper beam adjustment via hand crank - pre-screw rail for the bending beam - one-piece sharpening rail 135° space requirement L x W x H 1200 x 600 x 1100 mm weight 160 kg good condition

Condition: new, Year of construction: 2026, CNC-controlled electric motor-driven precision sheet metal folding machine / swivel bending machine Maximum bending length: 2,600 mm Maximum bending capacity with a 25 mm wide bending rail: - Steel sheet DC01-A with a tensile strength of approx. 350N/mm² or material S235JR: 3.5 mm - Stainless steel sheet 304L: 2.3 mm - Aluminium sheet H24 with a tensile strength of approx. 145N/mm²: 4.5 mm - Zinc sheet according to DIN EN988 with a tensile strength of approx. 190N/mm²: 2.3 mm Upper beam rail: 160° Upper beam stroke up to 240 mm Lower beam height approx. 830 mm Drive power: 9 kW Dimensions without rear gauge approx. 4.1 x 1 m x height 1.9 m Weight: 3,500 kg - Manual crowning device for the folding beam Blsdpfx Asy Afursl Isg - Rear gauge with 8 folding stop fingers - Stop range 10 to 750 mm (optionally 1,000 mm or 1,500 mm), Adjustable travel speed up to 500 mm/sec.

Condition: new, Year of construction: 2026, Heavy-duty manual universal precision sheet metal folding machine (swing bending machine) in very robust cast-iron construction – brand new Maximum bending length: 3,050 mm Maximum sheet thickness: - Steel – Precision sheet DC01-A with tensile strength approx. 350N/mm² – 2 mm - Aluminium sheet H24 with tensile strength approx. 145N/mm² – 3 mm - Zinc sheet according to DIN EN988 with tensile strength approx. 190N/mm² – 2.5 mm Upper beam – opening range 250 mm – - Allows box bending up to 250 mm. - Optionally available with motor-driven upper beam actuation. Maximum bending angle: 135° Lower beam adjustment range: 90 mm Bsdpfxoy Afgzo Al Ielg Bending beam adjustment range: 90 mm - An ideal machine for the production of pipes, pipe segments, and radius parts Dimensions without rear gauge approx. 3.6 m x 570 mm x height 1.3 m Weight: 3,000 kg

Condition: new, Year of construction: 2025, total length: 1,450 mm, total width: 800 mm, total height: 1,800 mm, overall weight: 500 kg, power: 4.75 kW (6.46 HP), FC 120 ZK Bjdpjt D D Nzofx Al Ielg Working capacity Ø 120x120 mm, No. of belt stations (Z) 1, No. of brush stations (K) 1, Sanding belt, dimensions 120x1850 mm, Brush belt dimensions 120xØ200 mm, Sanding belt speed 20 m/s, Brush belt speed 15 m/s, Feed speed 12 m/s, Sanding belt motor per head (x1) 3 kW, Brush motor per head (x1) 1.5 kW, feed motor 0.25 kW, Total power 4.75 kW, Power consumption 12A, Rod suction connection per head Ø (2x) 80 mm, Dimensions 1450x800x1800 mm, Weight 500 kg

Year of construction: 2001, condition: used, Erichsen Universal Sheet and Strip Testing Machine Model 145-60 Condition: Used Year of manufacture: 2001 Technical Specifications Hydraulic drive Motor power max.: 11.5 kW / 1500 rpm Pump output (small pump circuit): 12.3 dm³/min Bljdpfsyr R Uhox Al Isg Pump output (large pump circuit): 31 dm³/min Test cylinder Punching force: 665 kN / 160 bar Hydraulic test head opening Max. operating pressure: 95 bar Holding pressure: 50 bar Drawing force ranges, switchable Small drawing force range: 37 kN / 10 bar Medium drawing force range: 225 kN / 60 bar Large drawing force range: 600 kN / 160 bar Max. drawing stroke: 150 mm Max. drawing speed: 750 mm/min Drawing ram stroke display: Resolution 0.1 mm Electrical connection values Power supply: 400 V three-phase, 50 Hz Fuses: 25 AT and 35 AT Ambient operating temperature: between +5° and +50° C Dimensions, weight Dimensions (L/W/H): 1800 mm / 1320 mm / 1400 mm Net weight: approx. 2400 kg

Condition: used, Year of construction: 2010, Schroder manual folding machine. The machine is very robust, fully operational, and the blades are in good condition. Testing is possible. Completely repainted in original colors. Specification: Manufacturer: Schroder Bledpfx Aleymnhbs Isg Model: Ak 2500/1.0 Year of manufacture: 2010 Working length: 2500 mm Bending thickness: 1.0 mm Other: Repainted. Pneumatic clamping. No back gauge. If you have further questions, we will be happy to assist you.

Year of construction: 2009, condition: good (used), functionality: fully functional, machine/vehicle number: 0-286-21-0481, BARGSTEDT automatic panel storage system Base area: 26 x 10.5 m Overall height: 3.75 m (to top edge of crane) Stacking height: max. 2.5 m The storage system can be used for flexible feeding of a panel saw, a nesting machine, or as a convenient panel warehouse with automatic retrieval. Storage positions are freely programmable. Bljdpfxeyv Axno Al Ieg Important: The control software was updated in 2019 to TLF woodStore, version 7.12.6.0.