Used Max Rb 443T for sale (26,711)

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, fuel: diesel, driver cabin: other, gearing type: other, Reversing camera, heated windscreen, hands-free system, 7-inch touch display for bed control, turn assist system, front axle load 8.0 t, axle ratio 2.31, start-up warning system, Apple CarPlay & Android Auto, dark dashboard, attention assist, ComfortPlus equipment package, exterior color Frozen White, tires 385/55 22.5 make Continental / rear axle 315/70 R22.5 make Continental, CB radio antenna, DAB radio, dark interior flooring, ECOTORQ engine – 510 HP, EURO 6e, electric parking brake, electric tipper control, electrohydraulic steering with three driving modes (Comfort, Balance, Direct), ready for alcohol interlock installation, driver’s seat – premium high-grade Alcantara fabric, vehicle model Ford F-Max GEN 2.0, suspension: front leaf, rear air suspension, Ford Ecotorq OD transmission – 16-speed automatic – ratio 14.107–0.823:1, rear axle 13 t, including upper bunk, instrument panel 9-inch color display, Intelligent Speed Limit Assist (ISLA), keyless start, automatic climate control – 3 comfort modes (ECO, Standard, Comfort), LED headlights, multimedia system with 12.4" touchscreen, truck-specific navigation system, new safety assistance systems: "GSR package" (General Safety Regulation), emergency brake signal, premium Alcantara upholstery black, wheelbase/variant 3600 mm, tire pressure monitoring system, spare wheel omitted, steel wheels, fifth wheel coupling with coupling height 1100 mm, entry shoe compartment with rubber seal, sun blind, sun visor, standard mirrors, spoiler package with roof spoiler and side flaps etc., auxiliary air heater, sockets (12V/24V), fuel tanks: 600 + 450 liters (F-Max Series), tanks with side covers, Technology Package 5: automatic high-beam control, active brake assist with pedestrian detection, ACC with stop & go function, active lane keeping assist, USB ports type A and C, hidden step in bumper for window/sun visor cleaning, Voith Retarder VR 115CT. Note Despite meticulous checking of all our price labels, errors can still occur. Some may arise from transmission errors in the systems of different platform providers. Mistakes on our part cannot be fully excluded either. Therefore, we wish to point out that all information is provided without guarantee and does not constitute any legal claim. A price declaration cannot be considered a contractual component. If you place special value on a particular feature stated in our listing, please inform us at the time of contract conclusion. Thank you for your understanding! Hjdpfx Aljziup Njbjnr

Condition: new, Partially unpacked for photography – unused item from warehouse clearance. Cognex DataMan barcode reader, DMR-374X-MAX Manufacturer: Cognex Corporation Series: DataMan Type: Industrial barcode reader / 2D code reader Model: DMR-374X-MAX Device designation: DM374X Part number: 825-11058-1R 05 Electronics P/N: 821-10079-1R Rev 04 Supply voltage: 24 V DC ±15 % Hjdezd Nzpepfx Albsnr Serial number: 1A2022PP217663 MAC address: 00D024730ED8

Condition: used, mileage: 48,637 km, power: 130 kW (176.75 HP), color: white, gearing type: automatic, loading space length: 57,200 mm, loading space width: 24,900 mm, loading space height: 22,000 mm, Year of construction: 2023, Equipment: ABS, air conditioning, power assisted steering, For inquiries regarding the vehicle, please contact Mr. Seidel (tel. number provided). Mercedes-Benz Atego 818 L refrigerated box truck with tail lift Tail lift: Dautel DL 1000 L (1,000 kg) Refrigeration unit: ThermoKing V-600 Max Temperature recorder Hsdpfx Aszlbagjlbonr A1M front axle, 4.1 t A2B rear axle, crown wheel 325, hypoid, 6.2 t A2Z rear axle differential lock A5L axle ratio i = 3.417 B1B electronic braking system with ABS and ASR B1C electronic compressed air system unit, low B1F heater, electronic compressed air system unit B2A disc brake, on front and rear axle B4A condensate monitoring, for compressed air system C2J wheelbase 4220 mm C5I fastening parts, for platform body C6A steering ZF 8090 C6Y stabilizer, under frame, rear axle C7M protective device, lateral, weight-optimized C9Y omission of rear underrun protection (ECE) D1C driver's air-suspended seat, comfort D1M passenger's fixed seat, simple D2V armrests, on both sides, driver's seat D2Y seatbelt warning D3Q seat cover, velour D4B classic cockpit D4W power windows, on both sides D5Y rubber floor mats, driver and passenger side D6F air conditioning D6Y pollen filter D7L storage compartment, above windshield, 1 compartment D8A sunroof/ventilation flap, roof E0F batteries from Exide E0Y battery cover E1H batteries, 2 x 12 V/165 Ah, maintenance-free E1N generator 28 V/100 A E4C additional functions, for body manufacturer E5A switch no. 1 for external body electrical system E6Z reversing warning E7F cable remote control for air suspension E9H preparation for tail lift control F1X S-cab ClassicSpace, 2.30 m, tunnel F5L exterior sun visor, transparent F6I front mirror, heated F6J main mirror, electric, driver's side F7W cab entrance, single-step F8E locking system, with central locking F8F comfort locking system F8V light sensor F8W rain sensor F9A preparation, cab parts, body width 2600 mm G0K driving program economy/power G1D transmission G 90-6/6.70-0.73 G5G Mercedes PowerShift 3 I0E tires tubeless, 215/75 R 17.5 front axle/front drive axle I4A wheel formula 4x2 I5Q 7.5-tonner I6A platform chassis I6X air suspension, rear axle J1H instrument cluster, 12.7 cm J1O tachograph digital, 2nd generation, ADR J1S tachograph manufacturer VDO J3N Fleetboard Eco Support J3V Truck Data Center 7 J4X seatbelt warning, with seat occupancy recognition, passenger side J5S radio, with USB connection and Bluetooth J8Y preparation for Truck Data Center 7 J9D preparation for toll collection K0E plastic tank 120 l, left K3T AdBlue tank 25 l K5M tanks, lockable K5S protective cap for AdBlue dosing system K7I exhaust system, on the frame, right, tailpipe inwards L0A lighting regulations, according to UN-R 48.06 L0Y taillight cable set, extended L1B daytime running lights L2H side marker lights, flashing L9D preparation, additional turn signals M0S noise encapsulation, according to ECE M1I engine OM934, R4, 5.1 l, 130 kW (177 hp), 750 Nm M4X engine version Euro VI, E M5V High Performance Engine Brake M8Z fuel preheating O1N Off-Line FHS attachments O1X integration of CLCS TL function in ASAM P0L tail lift preparation, Atego Q1C front spring 3.4 t, parabolic R0Z wheel nut cover R1A steep shoulder rims 6.00 x 17.5 S1D stability control assistant (ESP) S1H lane keeping assistant S1P Active Brake Assist S5A speed limiter 90 km/h / 56 mph, ECE S5Z cruise control T0G weight variant 7.49 t (3.4/4.6) Z4D inline engine, 4 cylinders Loading space dimensions: L 5.720mm W 2.490mm H 2.200mm Tire profile: 1st axle...

Year of construction: 2020, condition: good (used), functionality: fully functional, For sale: Farmet FE1000 Clever Max industrial feed / soybean / grain extruder. Manufacturer: Farmet Model: FE1000 Clever Max Year: 2020 Main motor: 110 kW Throughput: approx. 900–2,100 kg/h depending on material and process setup Condition: used, fully functional Location: Slovakia, EU The extruder was used for approx. 2 years. Additional accessories were never used according to seller information. Included: Farmet FE1000 extruder Clever Max control system PLC control with HMI touchscreen Frequency converter for the main drive Stainless steel steam conditioner Cutting head Electrical control cabinet Accessories as shown in the photos Suitable for: soybean extrusion full-fat soybean processing cereal and grain extrusion oilseed meal / press cake processing compound feed production pet food and fish feed applications, depending on recipe and final line configuration The Clever Max control system allows better adjustment of extrusion parameters through PLC/HMI control and frequency regulation of the main drive. This is a strong industrial extruder suitable for medium-capacity feed and oilseed processing plants. Sold as shown in the photos. Inspection possible. Loading possible. Worldwide shipping on request. Price: FCA Slovakia, plus VAT. Zu verkaufen: Farmet FE1000 Clever Max Industrie-Extruder für Futtermittel, Soja, Getreide und Ölsaaten. Hersteller: Farmet Modell: FE1000 Clever Max Hedpfjxfcwmjx Albsnr Baujahr: 2020 Hauptmotor: 110 kW Leistung: ca. 900–2.100 kg/h, abhängig von Material und Prozess Zustand: gebraucht, voll funktionsfähig Standort: Slowakei, EU Der Extruder war ca. 2 Jahre in Betrieb. Weiteres Zubehör wurde laut Verkäuferangabe nicht benutzt. Ausstattung: Farmet FE1000 Extruder Clever Max Steuerung PLC-Steuerung mit HMI Touchscreen Frequenzumrichter für den Hauptantrieb Edelstahl-Dampfkonditionierer Schneidkopf Schaltschrank Zubehör wie auf den Fotos Geeignet für Sojaextrusion, Vollfettsoja, Getreide, Ölsaaten, Presskuchen, Mischfutter sowie Pet-Food- und Fischfutter-Anwendungen je nach Rezeptur und Linienkonfiguration. Besichtigung möglich. Verladung möglich. Versand auf Anfrage. Preis: FCA Slowakei, zzgl. MwSt.

Condition: used, Plasma cutting unit HYPERTHERM, Type Max 100 Plasma cutter with machine torch Machine No. 70-2513, Year of manufacture 1990 Power: 100 Amps = 80% duty cycle 89 Amps = 100% duty cycle Cutting capacity: up to 32 mm material thickness Adjustment range: stepless Hose package length: 22 meters Hnedpfxjyah Sae Albsr Compressed air connection: 4.7 bar Mains connection: 400 volts, 50 Hz, 63 Amps plug - Hose package with machine torch (hand torch without switch) - Spare nozzles for the plasma cutting torch - Separate push button switch for starting the plasma cutter Space requirement L x W x H: 850 x 700 x 1100 mm Weight: 225 kg Good condition Ideal for retrofitting to an oxy-fuel cutting machine.

Condition: used, Year of construction: 1992, Number of spindles per row of holes: 16 Number of horizontal spindles: 5 Hedpfxewv Nb Ne Albonr Cup hinge drilling head: yes Drill pitch: 32 mm Hold-down device: yes / pneumatic Power consumption: 2.2 kW Drilling unit: swivelling

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 370, total width: 2,500 mm, total height: 4,000 mm, total length: 7,000 mm, overall weight: 14,000 kg, type of input current: three-phase, space requirement width: 2,500 mm, space requirement length: 7,000 mm, space requirement height: 4,000 mm, input voltage: 380 V, oil tank capacity: 200 l, pressure: 300 bar, operating pressure: 250 bar, power: 37.51 kW (51.00 HP), year of last overhaul: 2023, noise level: 80 dB, Equipment: cooling unit, emergency stop, *Selling mobile wood briquetting system. *Press: Ruf RB440, output > 2 tons/hour. *Briquet dimensions: L 150 x W 80 x H 80 - 110 mm *Press completely overhauled, with all supporting documentation. *Truck with valid TÜV (technical inspection) until Jan. 2026, ready for use, also suitable for use in environmental zones / green license plate / tax-free!!! Classified as a self-propelled working machine. *PE packaging bags for approximately 90 tons, included. Hodpfx Aswhw Syjlbenr *Hydraulic pump Linde > New. *Gearbox discharge > New. *Suction fan motor 7.5 kW > New. *Complete hydraulic oil change with oil filter 200L > New. *Many spare parts available due to business closure. *Truck: MAN 14.232, 335,937 km, built in 1990. *Truck with new, reinforced flatbed body!! Manufacturer: Suhr. *TÜV > New. *Tires, all 6 > New. *Brakes on front axle newly replaced. *Everything is sold with training provided. *If interested, please contact us by email.

Condition: used, functionality: not functional, Bovone 371 glass beveling machine, disconnected and ready for loading. Working daily until recently, but limited to around 1m length of glass, due to needing some belt renewals. Now breaking for parts, all available for sale. Prices subject to part required. Hsdpfx Alsxbq Dyebsnr

Condition: used, Year of construction: 2004, bore capacity in steel (diameter) 50 mm arm length 1.600 mm workpiece height max. 1.200 mm distance spindle/base plate 320 - 1.220 mm spindle taper MT 5 quill stroke 315 mm throat min. 350 mm throat max. 1.600 mm quill feed 0,04 - 3,20 mm/U drive capacity - spindle motor 4,0 kW Hodpozcqyfefx Albenr spindle turning speed range 25 - 2.000 U/min column diameter 350 mm voltage 400 V total power requirement 6,5 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 2,45 x 1,00 x 2,65 m - Serial-No.: 4045935 - Clamping cube 630 x 500 x 500 mm - Coolant pump

Condition: used, mileage: 321,289 km, power: 368 kW (500.34 HP), first registration: 04/2023, fuel type: diesel, empty load weight: 8,506 kg, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 04/2027, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of beds: 2, front tire size: 315/70R22,5, rear tire size: 315/70 R22,5, number of seats: 2, Equipment: ABS, air conditioning, central locking, compressed air brake, cruise control, differential lock, onboard computer, parking heater, spoiler, truck registration, | Ford F-MAX 500 | Tank cladding | Automatic transmission, EURO 6 | Intarder, refrigerator | LED headlights | Leather steering wheel | Seat heating, auxiliary heater, cruise control | Air conditioning, electric windows, electric and heated mirrors | Radio/CD, differential lock | 2 tanks | Valid TÜV (technical inspection) until 04/2027 | Subject to errors, typing errors, and prior sale. Hnodpezkga Aefx Albsr

Condition: used, Year of construction: 1996, with 1 drilling head used in top condition cleaned functionally tested Manufacturer: Hettich Hnjdpfx Alezkvyxjbjr Type: Blue Max Mini Year of manufacture: 1996 Machine No.: 06316 CE type approval Number of spindles: 4 Drilling feed: pneumatic Table model, length x width: 800x400mm Swinging stops: 4 Drill chuck: shank 10 mm Dust extraction connection: 50mm Space requirement approx. L x W x H mm: 800x600x650 Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty and guarantee

Condition: excellent (used), Year of construction: 2009, Engel e-max 440/180 / All-electric injection moulding machine Year of manufacture: 2009 Injection unit: Screw diameter: 40 mm Shot weight: approx. 199 g Injection pressure: 1950 bar Shot volume: 220 cm³ Clamping unit: Clamping force: 180 t Tie bar distance: 520 x 520 mm Platen size: 760 x 775 mm Ejector: electric Clamping system: toggle lever Control system: CC 200 - touchscreen Additional equipment: Hedpfx Aljzc Nz Ijbjnr Machine in very good technical condition, operated in a clean production environment All-electric machine: high-speed, energy-saving, and very quiet Euromap 67 interface Robot interface 3 x air valves Hardened injection unit - bimetallic Parallel movements Central lubrication Automatic mould height adjustment Kistler sensor - mould pressure control Original mould crane Dimensions: Weight: 7,200 kg Length/Width/Height: 5.87 x 1.42 x 2.00 m All machines offered are started and tested by our service technicians prior to sale. It is possible to receive a video of the technical tests carried out on the selected machine, or to participate in live technical demonstrations at our company in Łódź. Price: On request

Condition: used, mileage: 282,243 km, power: 368 kW (500.34 HP), first registration: 10/2022, fuel type: diesel, empty load weight: 8,876 kg, maximum load weight: 9,124 kg, overall weight: 18,000 kg, wheelbase: 3,750 mm, next inspection (TÜV): 05/2027, color: blue, driver cabin: other, gearing type: automatic, emission class: euro6, number of seats: 2, Year of construction: 2022, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), navigation system, onboard computer, parking heater, power assisted steering, seat heater, soot filter, Interior * Automatic climate control * Air-suspended co-driver’s seat Comfort and Environment * Auxiliary heater * Cruise control Other * ADAPTIVE CRUISE CONTROL + ZF INTARDER * Armrest for co-driver’s seat * Replacement engine at 282,200 kilometers * Automatic headlight function and rain sensor * DAB radio * Electric cab tilting mechanism * Color: blue lightning * Grille color: light gray * Luxury Pack * Rent-to-own / Financing or leasing options available through F-Trucks Finance GmbH. We would be happy to prepare an offer for you. * Wheelbase 3750mm (600 L + 750 L standard tank) * Stand-alone air conditioning system with AGM battery 210Ah Other: Hnodpfxjy Sq N To Albjr * Nationwide delivery for €399 net plus VAT (€474.81 including VAT). * For all vans: On request, a 12 or 24-month Mercedes-Benz used car warranty is available. * We will gladly take back your current vehicle, offset its value against the new vehicle, or pay you the purchase price. * Leasing / Financing through Mercedes-Benz Bank. We would be happy to prepare an offer for you. * No liability for printing and typographical errors. * Subject to errors and prior sale.

Condition: good (used), Year of construction: 2022, functionality: fully functional, We are offering our Kornit Atlas Max, built in March 2022, for sale. The machine is first-hand, has always been well-maintained, and regularly and professionally serviced under a maintenance contract. Machine details: • Model: Kornit Atlas Max • Year of manufacture: March 2022 • Location: Germany • First-hand • Regularly serviced (maintenance contract in place) • Very good condition - fully functional and ready for use • Excellent print quality and very high print speed Why are we selling the machine? We have expanded our production capacity and therefore no longer need the Kornit Atlas Max. We have always been very satisfied with the machine and can fully recommend its reliability and performance. Additional information: • The Kornit Atlas Max is ideal for producing high-quality textile prints in large quantities. • Perfect for companies specializing in on-demand production and custom print jobs. • The machine uses environmentally friendly, water-based inks and is OEKO-TEX certified. Included in delivery: • Kornit Atlas Max DTG printer • Maintenance records and documentation • Original accessories A viewing and demonstration of the machine is possible at any time by arrangement. You are also welcome to conduct a test print on-site to see the print quality for yourself. If you are interested, we look forward to hearing from you! An excellent offer for anyone looking for a powerful and reliable DTG printing machine! ----- Hedpfev Sci Tox Albonr We are offering our Kornit Atlas Max, manufactured in March 2022, for sale. The machine is first-hand, has been well-maintained, and has been regularly and professionally serviced under a maintenance contract. Machine Details: • Model: Kornit Atlas Max • Year of Manufacture: March 2022 • Location: Germany • First-hand ownership • Regularly serviced (Maintenance contract available) • Excellent condition - fully functional and ready for immediate use • Outstanding print quality and very high print speed Why are we selling the machine? We have expanded our production capacity and therefore no longer require the Kornit Atlas Max. We have always been very satisfied with the machine and can highly recommend its reliability and performance. Additional information: • The Kornit Atlas Max is ideal for producing high-quality textile prints in large quantities. • Perfect for companies specializing in on-demand production and custom print orders. • The machine uses environmentally friendly, water-based inks and is OEKO-TEX certified. Included in the sale: • Kornit Atlas Max DTG Printer • Maintenance documentation and records • Original accessories Inspection and demonstration: An inspection and demonstration of the machine can be arranged at any time by appointment. We are also happy to perform a test print on-site to demonstrate the excellent print quality. Price and Contact: If you are interested, we look forward to hearing from you! A fantastic opportunity for anyone looking for a powerful and reliable DTG printing machine!

Condition: new, Year of construction: 2026, functionality: fully functional, operating pressure: 6 bar, inner dimension width: 600 mm, inner dimension height: 400 mm, volume flow: 10,500 m³/h, Equipment: documentation/manual, New Wire Mesh Belt Shot Blasting Machine RB-600 AH 4 Description: The RB-600 AH 4 wire mesh belt shot blasting machine from ABRAZIV Kft. is designed for the economical and continuous surface treatment of small to medium-sized workpieces. The machine is suitable for descaling, derusting, cleaning, and surface preparation of aluminum and steel castings, forgings, and workpieces that cannot be shot blasted in bulk. The machine is manufactured to order and can be configured individually according to customer requirements. The RB-600 AH 4 is equipped with four ABR-380 shot blasting turbines. Two turbines are located above and two below the wire mesh conveyor belt. This arrangement ensures optimal coverage of the cross-section and a uniform blasting result. The turbines operate at an angle of approximately 70° to the direction of travel and have eight blasting blades and a pre-accelerator. The active blasting area is lined with highly wear-resistant manganese steel. Other internal areas are protected by wear-resistant, noise-reducing rubber. The wire mesh belt is made of highly wear-resistant spring steel. A closed blasting media circuit with a screw conveyor, bucket elevator, blasting media cleaning system, and dosing system ensures reliable operation. Three-layer rubber curtains reduce blasting media leakage. An adjustable high-pressure blow-off system cleans the workpieces after the blasting process. The extraction and filter system with cartridge filters achieves a dust emission of max. 3 mg/m³. Technical Data Passage Passage width: 600 mm Max. workpiece height: 400 mm Min. workpiece length: approx. 1,000 mm Shot Blasting Turbines Number: 4 Type: ABR-380 Turbine diameter: 380 mm Speed: 2,800 1/min Blasting media output per turbine: 120 kg/min Wire Mesh Conveyor Belt Load capacity: 500 kg/m Speed: 0–4 m/min Power Consumption Base machine: 45.5 kW Cartridge filter: 7.5 kW Compressed air: min. 6 bar Compressed air consumption filter: 12.5 m³/h Other Data Blasting media capacity: approx. 1,000 kg Blasting media grain size: 0.4–1.2 mm Extraction capacity: 10,500 m³/h Filter area: 252 m² Dust emission: max. 3 mg/m³ Electrical Data Mains voltage: 3 × 400 V Control voltage: 220 V Frequency: 50 Hz Optional accessories available Magnetic drum separator Frequency converter Automatic blasting media dosing Special paint finish Transport Assembly Commissioning Operator training Spare parts supply Maintenance and service Applications Aluminum and steel castings Forgings Small steel components Single and series components Hnsdpfxjzkivte Alber Descaling Derusting Cleaning Surface preparation Location / Production Lichtenfels (Germany) / Kecskemét (Hungary) As a manufacturer, we produce shot blasting machines individually according to customer requirements. Other sizes and special designs are available. We will be happy to provide you with a non-binding offer. Price on request

Condition: used, mileage: 380,000 km, first registration: 06/2022, fuel type: diesel, fuel: diesel, gearing type: automatic, emission class: euro6, Equipment: AdBlue, air conditioning, central locking, spoiler, tachograph, Road tractor, automatic transmission, intarder, 380,000 km, side skirts, spoiler, alloy wheels, air conditioning, hydraulic system for a tipper semi-trailer, rear air suspension. Hedpfxoznw Daj Albjnr The price indicated above is plus 22% VAT + transfer of ownership fees.

Condition: like new (used), Year of construction: 2017, operating hours: 16,595 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 800 mm, workpiece length (max.): 2,000 mm, workpiece width (max.): 130 mm, workpiece height (max.): 800 mm, workpiece diameter (max.): 1,300 mm, workpiece weight (max.): 3,500 kg, spindle speed (max.): 10,000 rpm, spindle nose: ISO 50, number of slots in tool magazine: 60, VERTICAL MACHINING CENTER (DOUBLE COLUMN) WELE TECHNICAL SPECIFICATIONS Brand: Wele Model: RB-212 Year: 2016 CNC: Heidenhain iTNC 530 Table: 2000 x 1100 mm Travel X / Y / Z: 2120 x 1200 x 800 mm Table load capacity: 3500 Kg ISO 50 taper - 10,000 rpm Hnjdpozqbu Usfx Albsr Internal coolant system (air / coolant): 40/80 Bar Distance between columns: 1,300 mm Option to purchase a second electrospindle (separate price) Manual handwheel Blum TS50 probe Spindle and X/Y axis bearings replaced at 9108 hours Headstock power control module Preventive maintenance up to date, oil, filters, and coolant changes are carried out according to the manufacturer’s recommendations or based on usage.

Condition: used, mileage: 262,487 km, power: 368 kW (500.34 HP), first registration: 06/2021, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 06/2027, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Technical Features: Cruise control ADAPTIVE CRUISE CONTROL + ZF INTARDER LDWS (Lane Departure Warning System) Lane Keeping Assist System AEBS (Advanced Emergency Braking System) Emergency Braking Assist EBS (Electronic Braking System) ESP (Electronic Stability Program) for axles and wheels Wheelbase: 3600 mm Front axle Wheel size: 315/70 22.5 Brakes: Disc brakes Suspension: Parabolic leaf spring Load capacity: 7,500 kg Rear axle Wheel size: 315/70 22.5 Brakes: Disc brakes Suspension: Air suspension Interior: 8" cluster display Multimedia system with 7.2" touchscreen Truck-specific navigation system Ecotorq 12.7L Engine Power: 500 hp Torque: 2500 Nm 12-speed automatic transmission Rear-wheel drive Euro 6, Engine: 500 hp Emission standard Euro 6 Transmission: 12-speed automatic ZF ADAPTIVE CRUISE CONTROL + ZF INTARDER Tank 1: 600 liters Hsdpfxozkdfpj Albsnr PREMIUM SEAT FABRIC (BVFAM - 06589) SLEEPER CAB - BUNKBED AND UPPER STORAGE (CQ7AE - 07637) Option: SHOWROOM DISPLAY (979FR - 00000) Special equipment: SIDE SILL (A8DAB - 00000) Color: RED RUSH - METALLIC Superstructure Deal Type: None

Condition: excellent (used), mileage: 268,270 km, power: 120 kW (163.15 HP), first registration: 02/2020, fuel type: diesel, tire size: 235/65R16, axle configuration: 4x2, wheelbase: 3,670 mm, fuel: diesel, fuel tank capacity: 85 l, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, suspension: steel, total length: 6,220 mm, total width: 2,210 mm, total height: 2,880 mm, permissible axle load (axle 1): 1,650 kg, permissible axle load (axle 2): 2,250 kg, loading space length: 3,510 mm, loading space width: 2,080 mm, loading space height: 1,960 mm, Year of construction: 2020, Equipment: ABS, AdBlue, Android Auto, Apple CarPlay, Bluetooth, USB port, air conditioning, airbag, central locking, electric window regulation, navigation system, onboard computer, power assisted steering, power mirror, soot filter, traction control, Technical information Number of cylinders: 4 Engine capacity: 2.143 cc Axle configuration Tyre size: 235/65R16 Brakes: disc brakes Suspension: leaf suspension Front axle: Max. axle load: 1650 kg; Steering; Tyre profile left: 30%; Tyre profile right: 30% Rear axle: Max. axle load: 2250 kg; Tyre profile left: 30%; Tyre profile right: 30% Weights Empty weight: 2.899 kg Carrying capacity: 601 kg GVW: 3.500 kg Functional Cooling: 20 °C to 20 °C Make of bodywork: ThermoKing V500 MAX Cooling engine: diesel and electric Hnsdpezak Abjfx Albsr Wall thickness: 10 mm Environment Emission class: Euro 6d Maintenance, history and condition APK (MOT): tested until 01/2027 Technical condition: very good Visual appearance: very good Identification Registration number: 077624 Additional information Please contact Moussa or Youssef for more information = Additional options and accessories = - Climate control - DAB Radio - Multifunctional Steering Wheel - Multitemp - Particulate filter - Radio/Cd/Audio system - Reversing camera - Side door - Standby 380V = Remarks = Video of working vehicle: Very neat Mercedes Sprinter 316 CDI Refrigerated Van MT -20/+20 Cools, freezes, and heats ThermoKing V500 MAX Multitemp with folding partition Day and night cooling 380V 268,000 KM verifiable with Carpas

Condition: ready for operation (used), ROLLER-TYPE SHOT BLASTING MACHINE MANUFACTURER: USF SCHLICK RB 2100 Shot blasting processing of cut-to-size parts, profiles, and sheets. Hnsdpfx Alezbylujbsr Manufacturer: USF Schlick Year of manufacture: 2001 Type: RB 2100 Passage width: 2100 mm Passage height: 450 mm Blast wheels: 4 x 11 kW Infeed roller conveyor: approx. 6,200 mm + approx. 20 m Outfeed roller conveyor: approx. 9,000 mm Blow-off and brushing station: YES Filter system: Yes Cross conveyor: Yes Includes control cabinet, filter system Price: Loaded onto truck .-€ Warranty: 6-month functional and warranty guarantee upon commissioning by DECK Sarl. Spare parts supply for the next 10 years. OPTIONAL: Delivery / Assembly / Commissioning / Training We also offer spare parts for Rösler, Schlick, Wheelabrator, Gietart, etc. shot blasting machines!

Condition: used, This listing is for PCR Max Alpha Thermal Cycler The unit is in full working condition and ready for immediate use Compact and efficient thermal cycler designed for accurate DNA amplification. Features intuitive controls, uniform temperature distribution, and dependable cycling performance suitable for molecular biology workflows. Transparency Report and Technical Audit: Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Hnsdpfx Alsy Hw Skjbjr Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: BOCHU, laser type: fiber laser, laser source manufacturer: MAX, laser power: 6,000 W, laser wavelength: 1,080 nm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 16 mm, sheet thickness brass (max.): 12 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,010 mm, working width: 1,510 mm, working height: 100 mm, travel distance X-axis: 3,010 mm, travel distance Y-axis: 1,510 mm, travel distance Z-axis: 100 mm, cutting speed: 100 mm/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.02 mm, workpiece weight (max.): 1,100 kg, power: 1.5 kW (2.04 HP), input voltage: 380 V, type of input current: three-phase, type of cooling: water, overall weight: 5,230 kg, total length: 4,921 mm, total width: 2,225 mm, total height: 2,317 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, SENFENG SF1530NP 6kW fully enclosed compact fiber laser cutting machine The SENFENG SF1530NP 6kW is a fully enclosed, compact fiber laser cutting machine designed for efficient and precise sheet metal processing. With a working area of 1500 × 3000 mm, it is ideal for workshops, job shops, and manufacturing companies looking for a space-saving, safe, and reliable laser cutting solution. The machine is equipped with a 6kW MAX fiber laser source, a RayTools laser cutting head, and a BOCHU CNC laser cutting system. It is suitable for cutting stainless steel, carbon steel, aluminum, brass, and other metal sheets. The compact design, along with the integrated laser source and integrated control cabinet, reduces the required floor space without compromising stable cutting performance. Technical highlights: • Working area: 1500 × 3000 mm • Laser power: 6kW • MAX fiber laser source • RayTools or Precetic laser cutting head • BOCHU CNC laser cutting system • X/Y positioning accuracy: ±0.05 mm • X/Y repeatability accuracy: ±0.02 mm • Maximum speed: up to 100 m/min • Maximum acceleration: 0.8G • Maximum table load: 1100 kg • Machine dimensions: approx. 4921 × 2225 × 2317 mm • Machine weight: approx. 5230 kg • Power supply: 3-phase, 380V / 50Hz • Protection class of power supply: IP54 Hjdpfxjzd Dz Rj Albsnr The fully enclosed design increases operational safety and supports better smoke and dust control. The pull-out work table facilitates loading and unloading as well as the removal of residual material. The automatic gas distribution system enables precise control of nitrogen, oxygen, and compressed air, reducing manual adjustments. Typical applications include sheet metal processing, mechanical engineering, signage, kitchen and stainless steel fabrication, lighting manufacturing, control cabinet construction, automotive parts, and general metal processing. SENFENG Germany has its own after-sales team and offers installation, commissioning, operator training, and technical service. In addition, a local spare parts warehouse is available in Germany to enable rapid service support and reduce potential downtime. The SF1530NP 6kW is a practical solution for customers looking for a compact design, safe operation, reliable cutting quality, and professional local service.

Condition: new, Year of construction: 2026, functionality: fully functional, air demand: 15 m³/h, pressure: 6 bar, compressed air connection: 6 bar, operating pressure: 6 bar, inner dimension width: 2,000 mm, inner dimension height: 650 mm, volume flow: 12,000 m³/h, tank capacity: 2,500 l, air pressure: 6 bar, suction capacity: 12,000 m³/h, New RB-2000 Conveyor Blast System Description: The RB-2000 conveyor blast system from ABRAZIV Kft. was developed for the economical surface treatment of steel sheets, profiles, tubes, and welded structures and is ideally suited for descaling, derusting, cleaning, and roughening steel surfaces. The system is manufactured to order and can be individually configured according to the customer's requirements. Hnodpfxozikaqo Albor With a passage width of 2,000 mm and a workpiece height of up to 650 mm, the RB-2000 is particularly suitable for large and heavy workpieces. It offers maximum flexibility for demanding applications in steel construction, mechanical engineering, tank construction, and the metalworking industry. The RB-2000 is equipped with four high-performance ABR-500 blast turbines. Two turbines are arranged above and two below the conveyor, ensuring optimal coverage of the cross-section and a uniform blasting result. The inner surfaces of the blasting chamber are lined with highly wear-resistant manganese steel. Other areas are protected by wear-resistant rubber, which simultaneously reduces noise levels. A closed blasting media circuit with a screw conveyor, bucket elevator, blasting media cleaning, and dosing system ensures reliable and economical operation. All functions of the system are operated via a central control unit. In addition to automatic operation, a manual mode is also available for maintenance work. Technical Data Passage Passage width: 2,000 mm Min. workpiece length: approx. 1,500 mm Max. workpiece height: 650 mm Blast Turbines Number: 4 Type: ABR-500 Turbine diameter: 500 mm Speed: 2,600 1/min Blasting media flow rate per turbine: 150–300 kg/min Conveyor Load capacity: 1,500 kg/m Speed range: 0–4 m/min Power Requirements Base machine: 59–103 kW Cartridge filter: 15 kW Compressed air: min. 6 bar Compressed air consumption (filter): 15 m³/h Other Data Blasting media capacity: 2,500 kg Recommended blasting media grain size: 0.4–1.2 mm Extraction capacity: 12,000 m³/h Mains voltage: 3 × 400 V Control voltage: 230 V Frequency: 50 Hz Optional Frequency inverter Extended conveyors Automatic height scanning Automatic blasting media dosing Special paint finish Transport Assembly Commissioning Operator training Spare parts supply Maintenance and service Application Areas The RB-2000 is particularly suitable for: Steel sheets Steel profiles Tubes Hollow profiles Welded structures Steel construction Mechanical engineering Tank construction Contract blasting operations Location / Manufacturing Lichtenfels (Germany) / Kecskemét (Hungary) As a manufacturer, we develop and produce our conveyor blast systems individually according to customer requirements. In addition to the RB-2000, other sizes and special versions are available. We will be happy to advise you on the design of the appropriate system and provide you with a non-binding offer. Price on request.

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, navigation system, parking heater, Ford F-Max 510 CPP ?GEN 2 MCA? Hsdpfx Alsyvxlqjbenr For the sample vehicle, e.g., 48 months "3-way leasing" at €1,399/month (100,000 km/year) is possible over 48 months, or alternatively, a 60-month hire purchase at the same monthly rate. COM-FORD 4+0 Service Contract (e.g., €239/month) including 4 years comprehensive warranty as a package. 3-way leasing or hire purchase available upon request, subject to appropriate creditworthiness. For new orders (not pre-configured or stock vehicles), custom configurations can be realized directly! (e.g., "full air suspension," etc.) - Ford Ecotorq 12.7L diesel engine, 510 hp, Euro 6e - Voith retarder - Additional engine brake (400kw braking capacity) - Automatic climate control - Auxiliary heater - Dark interior - Classic mirrors - Technology Package 4 with ACC - Multimedia system with truck navigation - Radio - Bluetooth hands-free system - Refrigerator - Upper and lower bunk - Electric cab tilting mechanism - 2 x exterior storage compartments - axle load indicator - Lane departure warning, emergency braking assistant - Cruise control and limiter - LED daytime running lights - Aerodynamics package with roof spoiler and side flaps - Electrohydraulic steering with 3 modes - 3 years comprehensive warranty, etc. (Further details on request) Note: Subject to errors and prior sale. No liability for data transmission errors. If interested, please contact us directly to discuss details individually.

Condition: new, Year of construction: 2026, functionality: fully functional, pressure: 6 bar, compressed air connection: 6 bar, operating pressure: 6 bar, inner dimension width: 1,500 mm, inner dimension height: 450 mm, input voltage: 380 V, volume flow: 6,000 m³/h, tank capacity: 2,000 l, air pressure: 6 bar, Equipment: documentation/manual, New Conveyor Blast Machine RB-1650 Description: The RB-1650 conveyor blast machine from ABRAZIV Kft. has been developed for the economical surface treatment of steel sheets, profiles, tubes, and welded structures, and is ideally suited for descaling, derusting, cleaning, and roughening steel surfaces. The machine is manufactured to order and can be individually configured according to customer requirements. The RB-1650 is equipped with four high-performance ABR-400 blasting turbines. Two turbines are arranged above and two below the conveyor, ensuring optimal coverage of the cross-section and uniform blasting results. The inner surfaces of the blasting chamber are lined with highly wear-resistant manganese steel. Other areas are protected by wear-resistant rubber, which also reduces noise levels. A closed blasting media circuit with screw conveyor, bucket elevator, blasting media cleaning, and dosing system ensures reliable and economical operation. All functions of the machine are operated via a central control system. In addition to automatic operation, a manual mode is also available for maintenance work. Technical Data Passage Passage width: 1,650 mm Hnjdpfxszidyke Albor Min. workpiece length: approx. 1,500 mm Max. workpiece height: 450 mm Blasting Turbines Number: 4 Type: ABR-400 Turbine diameter: 400 mm Speed: 2,600 1/min Blasting media output per turbine: 130 kg/min Conveyor Load capacity: 1,300 kg/m Speed range: 0–4 m/min Power Requirements Base machine: 44 kW Cartridge filter: 7.5 kW Compressed air: min. 6 bar Compressed air consumption (filter): 3.2 l/min Compressed air tank (filter): 250 l Other Data Blasting media capacity: 2,000 kg Recommended blasting media grain size: 0.4–1.2 mm Extraction capacity: 6,000 m³/h Mains voltage: 3 × 380 V Control voltage: 220 V Frequency: 50 Hz Optional Extras Frequency inverter Extended conveyors Automatic height scanning Automatic blasting media dosing Special coating Transport Assembly Commissioning Operator training Spare parts supply Maintenance and service Application Areas The RB-1650 is particularly suitable for: Steel sheets Steel profiles Tubes Hollow profiles Welded structures Steel construction Machine construction Tank construction Contract blasting operations Location / Production Lichtenfels (Germany) / Kecskemét (Hungary) As a manufacturer, we develop and produce our conveyor blast machines individually according to customer requirements. We will be happy to advise you on the design of the appropriate machine and provide you with a non-binding offer. Price Price on request.