Used Mexpol - Defum Bench Drill for sale (6,666)

Condition: used, Bench drill, gear drill ALZMETALL Type AB 40 ST Production drill Manufacturer No. 750 Year of manufacture 1994 Drilling capacity 40 mm Spindle mount MK 4 - short quill Overhang 325 mm Quill stroke 200 mm Table size 740 x 460 mm Height adjustment of drill head 700 mm Distance spindle-table max. 1015 mm Spindle speed 56 - 2500 rpm 12 gear stages Automatic feed 0.15 - 0.2 - 0.3 - 0.36 mm/rev Motor power 4 kW Mains connection 380 Volt, 50 Hz - Spindle speed via 12 gear stages - Drilling and threading device with right and left rotation - Electric foot switch for switching the direction of rotation to left for thread cutting interruption - Rapid traverse via hydraulic quill movement - Semi-automatic operating sequence: rapid traverse - working feed - rapid return - Drill head height adjustment via hand crank - Table height adjustment via hand crank (table height from 740 to 1170 mm) - Coolant system Cgedpfeza Hzgex An Nsu - Control cabinet on the back of the machine - Mounted on a steel plate (1300 x 750 x 15 mm) with machine feet - Quick-change drill chuck METABO 3 to 16 mm - Operating manual and electrical diagram Overall height with drill head at the top 2750 mm Space requirement L x W x H 1400 x 850 x 2300 mm Weight 1250 kg Good condition

Condition: used, 2-spindle paper drilling machine Cgedswv S S Djpfx An Neu

Condition: used, Year of construction: 1991, - Drilling diameter: 3–10 mm (optionally up to 22 mm) - Drilling depth: Max. 70 mm - Spindle distance: Adjustable from 45 mm to 540 mm - Hole spacing: Min. 3 mm, Max. 800 mm Cjdpfowv D Haex An Negu - Table size: 98 x 60 cm - Additional features: Drill length compensation, cooling/lubrication, speed control

Condition: used, 220 V AC Cgedpfx Aewv D E Non Neu 50 / 60 Hertz 800 W 8 A Pile height: 50 mm Speed: 18 seconds

Condition: excellent (used), Year of construction: 2019, HD-SFVO 412-S HBE 320/523 G- YEAR 2019. Marking-drilling-milling-shearing & sawing line HD-SFVO 412-S DRILLING CAPACITY. Flat bars: 50x10 to 400x30 Angles: 50x50x5 to 250x250x20 IPN-IPE: 80 to 400 HEA-HEB: 100 to 400 UPN-UPE: 80 to 400 Square and rectangular tubes: 50x50 to 300x300x20 HBE 320/523 G SAWING MACHINE. Effective cross-section (mm): 90°: 400x300 Bevel cut, left pivot (W x H, mm): 75°: 400x300 60°: 400x300 45°: 330x300 30°: 200x300 Bevel cut, right pivot (W x H, mm): 75°: 400x300 60°: 400x300 45°: 310x300 Cgsdpjy R Tk Rjfx An Nju Power supply: • Three-phase 400V ± 15 V + ground, 50Hz • Installed power: 40 kVA Compressed air: • Minimum pressure: 6 bar • Maximum flow rate: 3 Nm³/h Operating temperatures: • From 10°C to 40°C Milling unit specially designed for machining small square or rectangular tubes (slotted holes, shaped cuts, etc.). With the engraving equipment: ability to engrave letters or numbers for part identification. Allows, among other things, marking of tubes with sufficient depth to ensure legibility after painting or galvanizing Secure holding of the bar during milling: the bar is clamped in the movable vice system to ensure proper machining while minimizing vibrations. Improved positional tolerance of one hole relative to another within a group of holes (within a maximum length of 150 mm) Additional features Cycle for centre punching, countersinking, tapping, deburring, and chip breaking Automatic measurement of tool length (HSS) Side and centre tool cooling 230-ton shear Feature Mobile hydraulic shear Straight cut Average cutting time: approximately 2 to 2.5 seconds Capacities: HEB 140 IPE 300 IPN 280 Angle bars 150x150x18 L 200x100x14 UPE 300 UPN/UPAF 300 Flat bars 300x20

Condition: used, Year of construction: 1970, Column Drilling Machine FLOTT SB32 Spindle mount: MK3 Spindle speeds: 135–770 rpm Round table, diameter 400 mm Cjdpfxjyvr Acs An Njgu Overall height: 2 m Weight: approx. 200 kg.

Condition: excellent (used), Year of construction: 1989, Column drilling machine, make GILLARDON, type: GB 45 VE, year 1989, in good condition. Equipped with thread cutting device, coolant system, machine lamp, machine documentation. Cjdpfsx Hr Akex An Negu Spindle taper: MT 4 Spindle speeds: 40–1100 rpm, motor power: 2.2 kW Maximum drilling capacity in steel: 45 mm – 55 mm Maximum drilling stroke: 200 mm 3 feeds: 0.1–0.16–0.25 mm/rev Maximum thread cutting in steel: M42 / M60 Table size: 560 mm x 450 mm Required space: 1.3 m x 0.8 m x 2.1 m, weight approx. 740 kg.

Condition: good (used), Year of construction: 2018, Flame-cutting and drilling system Plate processing center Manufacturer: Vernet-Behringer Type: MAG EVO 420 Year of manufacture: 2018 CNC control Power source: Kjellberg HiFocus 360 Plasma cutting for material thickness: 5 to 50 mm Spindle speed: 160 – 4,000 rpm Automatic tool changer Tool holder capacity: 14 Drive power: 16 kW Cgodpfx Aovzrczsn Nju Drilling diameter: 5 - 40 mm V-scoring for marking: 5 to 40 mm Sheet metal dimensions min.: 1,500 x 300 mm (750 x 400 mm with limitations) Minimum dimensions of finished parts: 80 x 80 mm Sheet metal weight max.: 2,600 kg and 650 kg/m Infeed side: Roller conveyor for flat steel or plates: 4,000 x 2,000 mm Zero-point transverse conveyor Number of carriages: 2 clamps NC infeed carriage, positioned on the side 4 clamping jaws (2+2) 3 short-stroke transverse conveyors Working height: 1,000 mm Outfeed side: Outfeed roller conveyor with a lowerable discharge table with a chute leading into a material collection container for unloading small parts. Filter unit including piping High-performance for use with carbide tools. For drilling, tapping, marking, milling, and plasma cutting of flat steel and sheets. Software options for milling and scoring LANTEK license 3626ä Availability: Immediate!

Condition: good (used), functionality: fully functional, BENCH DRILLING MACHINE TYPE: TB 16 YEAR OF MANUFACTURE: 1977 Cgedpfx Asy Dp I Esn Nou Technical Data: - Maximum drilling capacity: 16 mm - Drill spindle: MK2 - Drilling depth (stroke): 100 mm - Drill table: 220 x 360 mm - Drive power: 0.75 kW / 1 HP - Motor speed: 1400 rpm - Spindle speeds: 430-680-1120-1800-2800-4500 rpm Equipment: - ALBRECHT quick-action drill chuck 0-13 mm - Documentation

Condition: used, Hole rows + fitting drilling machine LAUTENSCHLÄGER Meplamat 300 pneumatic hold-down device, Cgsdpfx Ajvtm Ayon Nou pressing device, stop rulers

Condition: new, - Sturdy steel and cast iron construction - Dynamically balanced milling unit anchored to the work table - Especially robust design - Smooth operation thanks to precision assemblies and high intrinsic weight - Standard with reversing function (left/right rotation) and electronic interlock when changing direction Codpfx Ansu T Hhks Nogu - Five speeds from 3,000 to 10,000 rpm - Speed change is easily and conveniently operated from the machine side - Standard with MK 4 quick-change spindle system - Large cast iron work table for long-term precision - Easy handling via control elements and speed display located at the front of the machine - Large dimensioned milling fence with fine adjustment and aluminum fence jaws as standard - Fence adjustment via hand crank - Numeric display of the set spindle height, accurate to 0.1 mm - Powerful industrial motors This product comes with a 3-year Stürmer warranty upon online registration. Warranty applicable to end customers in Germany and Austria only. Manufacturer: SCM Group S.p.A. Via del Lavoro 1/3-Po Box 168, 36016 Thiene-Vicenza, Italy Dimensions and Weights: - Net weight approx.: 510 kg Dust Extraction Connection: - Number of extraction ports: 2 - Extraction port diameter: 80 mm - Number of extraction ports on fence: 1 - Extraction port diameter on fence: 120 mm Work Table: - Work table length: 2,500 mm - Work table width: 810 mm - Table height: 923 mm Placement Information: - Space requirement explanation: Dimensions take into account the maximum travel ranges or usable lengths. - Working area length: 3,700 mm - Working area width/depth: 5,000 mm - Working area explanation: Please add the specified measurements to the space requirement to obtain the recommended free installation area for the machine. Equipment: - Milling fence: Heavy-duty professional version with aluminum fence jaws and fine adjustment, adjustment from the front via hand crank with numeric digital display - Curved milling safety hood - Spindle height adjustment: manual - Spindle tilt adjustment: manual - Control: manual adjustment of milling unit height and tilt - Control element position: located on the machine body - Table configuration: table extension on left and right, and pull-out workpiece support (total width 2,500 mm) Electrical Data: - Connection voltage: 400 V - Mains frequency: 50 Hz - Drive motor power: 7.0 kW Milling Spindle: - Spindle tilt: -45 to +45° - Usable spindle length: 140 / 180 mm - Usable spindle length explanation: for spindle Ø 30–35 mm / for spindle Ø 40–50 mm - Milling spindle stroke: 90 mm - Quick-change spindle: MK 4 - Spindle speeds: 3,000 / 4,500 / 6,000 / 8,000 / 10,000 rpm Max. Milling Tool Diameter: - Max. tool diameter (lowerable): 320 x 60 mm - Max. profile milling diameter: 250 mm - Max. tenoning diameter: 350 mm - Max. form milling diameter: 160 mm

Condition: new, Drilling and Milling Machine OPTIMUM OPTImill MB 4 Cgjdpfx Aeu R Tften Neu - Exhibition Machine - This offer is for an equipment package. The following items and options are already included in the price: - Drilling and milling machine OPTImill MB 4 Optimum - Machine base MSM 3 Optimum - Collet chuck set MK 4/ ER 32 - M16 Optimum - End mill set HSS IMUM - Precision machine vice FMS 100 Optimum - new exhibition machine -

Condition: used, table dimensions 500 x 1.200 mm number of T-slots 30 distance t-slots 125 mm distance spindlenose to table 110 - 760 mm Swing radius 535 - 1.135 mm boring range 600 mm work height max. 800 mm quill stroke 200 mm Height adjustment of the drill head 450 mm no. of turning speeds 18 turning speed range 35 - 1.800 U/min bore capacity in St 60 - in full material Ø40 mm bore capacity in GG 22 - in full material Ø50 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Cgodpfxsy Umg Ts An Nou Subject to changes, errors in technical data and specifications, and prior sale!

Condition: new, Year of construction: 2026, New! Magnets for positioning the sheets are integrated into the bending jaw. We have the machine in stock in Halver! Free delivery within 150 km. SERVICE CENTER HALVER FOR BENDING TECHNOLOGY. YOUR competent partner for BENDING MACHINES. We can demonstrate the machines upon request, along with expert advice and professional training. We will advise you individually – according to your needs – and look forward to your inquiry. The ZGR2000/0.8 bending machine from Prod-Masz is available to try out on-site and take away immediately. Sheet clamping on this swing bending machine is also done via hand levers. Technical specifications: - Working width: 2140 mm - Sheet thickness: Steel up to 0.8 mm - Non-ferrous metals: 30% thicker sheet - Bending angle: up to 145° - Bending jaw: 15 mm - Clearance: 80 mm - Degree scale - Stop for preset bending angles - Sheet support - Front depth stop Cgsdpfxjzbm Ayo An Nou - Weight: approx. 175 kg Other dimensions (1000, 1440, 2140, 2640, 3140, 3640, 4140 mm) available upon request Accessories: Roller shear €350 All prices are subject to 19% VAT. CE certified Warranty: 12 months Collection is possible Shipping within Germany: €180

Condition: new, Year of construction: 2026, Folding bench ZGR2000/0.8 on roles the company prod masz locally to the try out and equal to the take. You get professional instruction on the spot. Technical data: Working width 2140 mm Cgsdpfx Aszbm Aten Neu -Thickness steel until 0, 8 mm -Buntmetallen thickness of 30% more Bending angle up to 145° -Beam: 15 mm -Forward: 80 mm Scala of degree of Velocity for preset bending angle Tray for sheets Hanger depth stop Weight approx. 175kg Other dimensions (1000,1440,2140,2640,3140,3640,4140mm) on demand Accessories - Rollenschere(bis 0,8mm) 350EUR Shipping within Germany 180EUR All prices are inclusive of value added tax. Pickup Certificate CE Warranty: 12 months.

Condition: new, Year of construction: 2026, Folding bench ZGR3000/0.8 of prod masz company local to the try out and equal to the take. You get professional instruction on the spot. Folding bench ZGR3000/0.8 Working width 3140 mm Thickness 0, 8 mm Bending angle up to 145° Gas pressure spring Scala of degree of Velocity for preset bending angle Hanger depth stop Tray for sheets Weight approx. 450kg Other dimensions (1000,1440,2140,2640,3140,3640,4140mm) on demand Accessories Rollenschere(bis 0,8mm) 350EUR All prices are with plus 19% VAT. Codpfxjzbmzce An Njgu Certificate CE Warranty: 12 months Pickup 360EUR shipping within Germany

Condition: new, Year of construction: 2026, Free delivery up to 150 km. Folding bench 2m incl. transport rollers "RED 160 degrees" from the company Prod-Masz to try on site and to take away. You will receive professional instruction on site. Technical data: - including cut-outs in the beams - Working length: 2060 mm - Bending capacity: up to 0.6 mm Cgodpjzbmx Ujfx An Nsu - Bending angle: max 160 degrees - Bending beam thickness: 15 mm - Upper beam stroke: 80 mm - Weight: about 180 kg - Lifting of the upper beam in three positions Furnishing: - degree scale - angle stop - rear frame - front depth stops -Certificate CE -12 months warranty Accessories - roller scissors (up to 0.8mm) 350EUR Shipping within Germany 180 EUR All prices are plus 19% VAT Self pickup

Condition: used, Engraving Cutter Grinding Machine MBB - Maschinenfabrik Baden Baden Type FSS Cedpfx Ansyxy S Rj Nsgu Serial No. 2861 Year of manufacture: 1987 Grinding wheel diameter: 100 mm Grinding wheel speed: 4,600 rpm Motor power: 0.25 kW Power connection: 380 Volt, 50 Hz - Collet clamp device for collet 355E (saw thread M20x2 mm) - Including 3 collets Ø 0.5 - 6.0 - 17.0 mm - Maximum collet bore: 18 mm - Grinding wheel dressing device - Cup wheel Ø 100 mm - Operating manual Space required (L x W x H): 450 x 450 x 300 mm Weight: 32 kg Very good condition

Condition: used, Year of construction: 2017, machine/vehicle number: 17.018.011, Weight: 4,950 kg, travel ranges: X/Y/Z: 11 mm, drilling capacity: connection power: 7.5 kW, spindle speed: 3,000 rpm, current draw: 32 A, with a 12-position tool changer, 10 pneumatic clamps distributed along the entire bed length, with various fixtures and conveyor elements, operator terminal, control cabinet, safety fence with access door, machine footprint: 300x14,000 cm. Cgedpfx Aney T Nz Ds Nou

Condition: good (used), Year of construction: 1998, functionality: fully functional, Anayak FBZ-HV-2500 Year of manufacture: 1998 Cgodpfx Anjy Tqb Eo Neu Machine no.: M-980610 Control system: Heidenhain TNC 426 X/Y/Z: 2500/900/975

Condition: good (used), Year of construction: 1999, functionality: fully functional, Anayak VH plus-2000 Year of manufacture: 1999 Machine no.: M-991103 Control system: Heidenhain TNC426CB Net weight: 24 tons Cgedpfxsy Tqbxj An Nsu X/Y/Z: 2000/1300/1460

Condition: new, Year of construction: 2026, - Stepless speed control - Quickly adjustable depth stop - Thread cutting device - Undervoltage release - Table height adjustment via rack and pinion - LED lighting in the head - Continuous/normal drilling capacity 20/23 mm - Thread cutting capacity max. M 12x1 - Spindle MK II - Drilling depth 100 mm - Arm overhang 260 mm - Column diameter 110 mm - Usable table surface (W x L) 420 x 340 mm - T-slot size (arm): Number 2, spacing 125 mm - Speed display Digital - Drilling depth display Digital - Quickly adjustable depth stop - Manual feed - Motor, three-phase, 400 V Codpfx Aned Nk S Is Negu - Spindle speeds, stepless, 30 - 3,000 rpm Optional drilling kit 3 consisting of: - Machine vise [felix] 2.0 100 mm - Quick-change drill chuck 3-16 mm (accuracy 0.17 mm), - Taper shank MK 2 B18 and reducing sleeve MK 2 to MK 1 € 485.00 Optional: Coolant system: € 620.00 FACTORY WARRANTY: 3 years DELIVERY: Free delivery including packaging NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: new, Year of construction: 2026, Cutting device Programmable boring depth shut-off Boring depth and speed display - digital Threading device M20 (dependent on pitch) Infinitely variable speed from 125 - 4000 RPM in two stages, stage change via belt deflection. Boring capacity 25/30 mm Spindle MK 3 Boring depth 125 mm Overhang 280 mm Usable table surface (swiveling) 420 x 340 mm Feed rate 0-300 mm/min, infinitely variable Table height adjustment with rack and pinion Machine dimensions (W x D x H) 520 x 820 x 1900 mm Motor - three-phase 400 V, pole-reversible 0.9/1.45 kW Weight 300 kg OPTION: - Drilling package 5 consisting of: taper mandrel, drill chuck, vise, and T-slot set (€845) - Spindle stop and chip breaker module (€864) DELIVERY: free to your door, including packaging Cgjdpfxsd H Rgfs An Neu NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: new, Year of construction: 2026, Drilling depth and speed display – digital Thread cutting capacity M20 (depending on pitch) Stepless speed control from 125 - 4000 RPM in two stages, stage change via belt adjustment. Drilling capacity 25/30 mm Thread cutting capacity (depending on pitch) M20 Spindle MK 3 Drilling depth 125 mm Overhang 280 mm Usable table surface (swiveling) 420 x 340 mm Manual feed Table height adjustment with rack and pinion Machine dimensions (W x D x H) 520 x 820 x 1900 mm Motor – three-phase 400 V, pole-changing, 0.9/1.45 kW Weight 275 kg OPTION 1 - € 625.00 Drilling package 4 consisting of: - Vise [felix] 2.0 - 120 mm, clamping width 0-168 mm - Quick-change drill chuck, mount B18, 3-16 mm (accuracy 0.17 mm) Taper shank MK 3 B18 and reducing sleeve MK3 to MK 2, as well as MK 3 to MK 1 OPTION 2 - € 1,245.00 Thread cutting attachment, max. M20, adjustment of thread cutting depth via digital depth display Delivery: FREE DELIVERY, including packaging Factory warranty: 3 years NOT THE RIGHT MACHINE? Cgedjd H Rffopfx An Nou WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: new, Year of construction: 2026, Standard Equipment - Thread cutting device - Control panel with OLED display - Robust, high-quality drill head cover - LED lighting - Quickly adjustable and ergonomic drill depth stop - Stepless speed control via rotary knob - Thermal overload protection - Spindle stop - Drill protection with electrical protection - Connection cable with CEE plug - Mechanical feed of the Z-axis - Incl. electromagnetic clutch for 3 feed speeds - Drilling cross with push button - In thread cutting mode: Right/Left TECHNICAL DATA Continuous/Normal drilling capacity (mm) R1 - 27/32 (in E335/ST60) (100) R2 - 25/30 (in E335/ST60) (70) R3 - 30/35 (in E335/ST60) (200) Maximum thread cutting capacity: R1= M24x3, R2= M20x2.5, R3= M30x3.5 Spindle MK III Drilling depth: 125 mm Overhang: 300 mm Column diameter: 125 mm Usable table area (W x D): 590 x 450 mm Speed display digital Drilling depth display digital Drill depth stop with fine adjustment Table height adjustment with rack and pinion Spindle/Table: 150-700 mm Spindle speeds stepless: R1 (1-stage) 0-1,000 rpm R2 (1-stage) 0-1,600 rpm R3 (2-stage with gearbox) 0-4,000 rpm Optionally R1 or R2 without extra charge Extra charge for R3: € 1,700 Accessories: Coolant system (€ 620) - Separate container - Filling volume: max. 15 l - Delivery rate max. 13.4 l/min Cedpfsfmh Tljx An Negu Accessories: Drilling package 5 (€ 875) - Vise [felix] 2.0 150 - Taper shank MK III/B18 - Reduction sleeve MK III/MK I - Reduction sleeve MK III/MK II - Quick-change drill chuck B18 3-16 mm (Accuracy 0.17 mm) WARRANTY: 3 years (single-shift operation) DELIVERY: free to your doorstep incl. packaging NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!