Used Niro-Tech Boot Washer for sale (5,469)

Condition: used, Year of construction: 1996, Overview  This Krones Lavatec KES-2-5-312/25-110 bottle washer was manufactured in 1996 and has an output of 29,000 bottles per hour. The machine has been modernized several times, including an S7 control system, caustic filtration with drum screen and pH value measurement for hot water 1. The machine will run until the end of January 2026 and can be inspected in person at any time until then. Technical details  Output: 29,000 bottles/hour Bottle diameter: 54 - 90 mm Bottle height: 180 - 340 mm Equipment & modernizations  Plastic cell with 110 pitch Suitable for swing-top bottles Bottle diameter: 54 - 90 mm Bottle height: 180 - 340 mm Modernizations: Retrofitted S7 control system Drum screen for caustic filtration Railing on the machine Hanger-specific caustic spraying in the deflector Cleaning & heating system: Rental rotating spraying Heating with tube bundle exchanger and hot water Lye concentration measurement and dosing control, also for post-caustic pH value measurement for hot water 1 Soaking & rinsing system: Double pre-soak with sieve belt Lye volume: 30 m³ Caustic solution, hot water 1, hot water 2, cold water and fresh water Head section can be steamed and rinsed with disinfection H₂ suction Codsvxtavjpfx An Nsgu

Condition: used, Year of construction: 2024, Overview The bottle washer was previously used in a brewery. Due to the low number of operating hours, the machine is in very good condition, like new. It was replaced, as the previous owner wanted to run bottle formats, which did not fit this machine. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported. The machine comes with 12months warrantee. Tech Specs: Capacity: 9,500 bph Cell Pitch: 95 mm Bottles per row: 25 Dimensions + Weights: Housing: 7,162 x 2,740 x 2,500 mm / 18,806 kg Ready for operation with attachments: 7,162 x 3,540 x 2,730 mm / 31,563 kg YOM 2024 Formats: 0,25l 0,33l 0,5l 0,75l The Machine in Detail / Equipment Features: Heated by steam Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing CE certified Chemical Dosing Pumps Machine data sheet included High pressure pre rinsing Rotating Spray nozzles Single End Machine Label discharge rear right Finger discharge + finger feed Bottle cells made of plastic Concentration measurement NaOH supply liquid Sectional view arrangement of baths Spindles SST 24 volt control voltage Control Siemens S7 Regularly maintained Full machine body in SST Vapor Discharge Machine dismantled, ready to ship Automated machine Startup Cedpfx Anevrfivs Negu

Condition: used, Year of construction: 1999, Overview The bottle washer was previously used in a brewery. Due to the complete reconditioning in 2005 and continuously maintentance, the machine is in very good condition. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported.  Tech Specs: Capacity: 6,700 bph Cell Pitch: 102 mm Bottles per row: 10 Dimensions + Weights: Housing: 7,200 x 1,300 x 2,850 mm / 13,500 kg Ready for operation with attachments: 7,790 x 3,450 x 2,950 mm / 20,000 kg YOM 1999 Formats: 0,33l 0,5l The Machine in Detail / Equipment Features: Heated by steam Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing CE certified Chemical Dosing Pumps Machine data sheet included High pressure pre rinsing Rotating Spray nozzles Single End Machine Label discharge rear right Finger discharge + finger feed Bottle cells made of plastic Concentration measurement NaOH supply liquid Sectional view arrangement of baths Spindles SST 24 volt control voltage Control Siemens S7 Regularly maintained Full machine body in SST Vapor Discharge Machine dismantled, ready to ship Automated machine Startup Cedpswg E D Isfx An Nogu

Year of construction: 2024, condition: good (used), Electrolux EPPWELG Electronic pot washer Serial: 4202015806 Cgsdpfoyzilrjx An Nju 2024, stainless, with wash tank, tank filter and wash and rinse arms, safe wash controls,

Condition: good (used), functionality: fully functional, Used professional Gummi-Mayer parts washer. The unit has barely been used and is in very good, fully functional condition. Cgedpfx Anszapzps Nju Please no email inquiries! If you have any questions, we are happy to assist you by phone. Inspection and collection only by prior telephone appointment! Subject to changes, prior sale, and errors.

Condition: excellent (used), mileage: 6,650 km, power: 52 kW (70.70 HP), fuel type: electric, gearing type: automatic, axle configuration: 4x2, wheelbase: 4,330 mm, first registration: 12/2023, emission class: euro6, color: white, driver cabin: day cab, number of seats: 3, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, cruise control, immobilizer system, power assisted steering, sliding door, traction control, = Additional options and equipment = - Automatic dipped beam lights - Passenger bench seat - Third brake light - Electric windows - Electrically adjustable exterior mirrors - Driver airbag - Remote central locking - Cruise control - Height-adjustable steering wheel - LED daytime running lights - Front center armrest - Rain sensor - Side sliding door - Immobilizer - Advertising (applied decals) - Double rear doors - Partition wall - Partition wall without window = Additional information = General information Number of doors: 3 Cab type: single Registration number: VZG-18-J Axle configuration Maximum front axle load: 1,850 kg Maximum rear axle load: 2,100 kg Dimensions Csdpfjvfn Smex An Negu Length/height: L4H3 Dimensions (L x W x H): 620 x 207 x 255 cm Weights Curb weight: 2,167 kg Payload: 1,333 kg Gross vehicle weight: 3,500 kg Interior Interior: grey Maintenance APK (general technical inspection): valid until 12/2027 Condition Technical condition: very good Optical condition: very good Number of keys: 2 (2 remote controls)

Condition: excellent (used), Year of construction: 2015, ENGEL victory 650/120 tech (25.109 h) (S&P 3793) Csdpfjzbaziex An Njgu Manufacture year: 2015 Operating hours: 25,109 Stunden Screw: 35 mm Injection pressure: 2400 bar Stroke volume: 192 cm³ Clamping Force: 120 t Tie bar distance: 740 x 680 mm Mould installation height min.: 300 mm Plate distance max.: 800 mm Dimensions: 5100 x 1500 x 2350 mm Eeight: 7000 kg Connected load: 22 kW Automatic door, Corepuller 1x, Airvalve, Hotrunner, price when new 122.000,- € etc... Price: on request contact: Mr. Ralf Schulz

Condition: used, Year of construction: 2011, HWACHEON HI-TECH 200B MC CNC LATHE MAKE HWACHEON, MADE IN SOUTH KOREA MODEL HI TECH 200B, MC YEAR 2011 CONTROL FANUC Oi-TD SWING OVER BED 500.0 mm SWING OVER SADDLE 390.0 mm MAX MACHINING DIA 350.0 mm MAX WORK LENGTH 400.0 mm TRAVERSES (XZ) X AXIS: 195.0 mm Z AXIS: 430.0 mm CHUCK DIA 250.0 mm MAX. SPINDLE SPEED 3,500 RPM SPINDLE NOSE A2-8 SPINDLE BAR CAPACITY 76 mm TURRET 12 STATIONS MACHINE WEIGHT 4,500 kgs Cjdpfx Asyyy Stjn Nogu PLUS C AXIS MILLING CNC BARFEED RENISHAW PROBE PARTS CATCHER TAILSTOCK SWARF CONVEYOR MACHINE MANUALS

Condition: not inspected (used), Year of construction: 2010, machine/vehicle number: 61015538, This Engel injection molding machine, model victory 1050/220 tech, manufactured around 2010, will be auctioned off in our online auction "Site Closure Wirthwein Friedberg GmbH & Co. KG - Machines, Tools, Workshop Equipment, etc." along with an MB Conveyors conveyor belt, manufactured in 2012, and a motan mixing unit, manufactured in 2024. You can find this and many other items from the field of injection molding technology, production & workshop equipment, temperature control units, lifting technology, eroding machines, measuring instruments, transport & social area equipment, etc. on our RESTLOS auction platform! Engel injection molding machine Nameplate data: Manufacturer: Engel No.: 177100 Year of manufacture: 2010 (partially covered, presumably) Type: victory 1050/220 tech Weight: 12,200 kg motan mixing unit Nameplate data: Cgjdpfx Anoy Uzdaj Neu Manufacturer: motan holding Designation: Mixing unit Model: Mixing module - 2l - MB Rated voltage (UN): 24 V DC Control voltage (Us): 24 V DC Current (IL): 2.7 A Max. weight (mmax): 8 kg Year of manufacture: 2024 Serial number (SN): 677A01A24 14293 RA: BM02A CE marking: present UKCA marking: present MB Conveyors conveyor belt Nameplate data: Manufacturer: MB Conveyors Model: N-CPR LOW-COST Year of manufacture: 2012 Registration No.: B20032 Voltage: 400 V CE marking: present as shown in the pictures without any other items shown in the pictures Functionality untested

Condition: new, Year of construction: 2024, functionality: fully functional, total length: 2,900 mm, total width: 620 mm, total height: 1,500 mm, for approx. 100 E2 crates/hour incl. crate turner (single-person operation) System layout: 1. Zone – Main washing zone: – with a centrifugal pump with 2.2 kW (900 l/min at approx. 1 bar) distributed over a total of 50 stainless steel nozzles, which enable thorough cleaning of all 4 sides. A plate filter continuously cleans the washing solution and filters it continuously. – Tank volume 180 l – Washing temperature in the main washing zone 50-55°C The crate transport takes place via a spiral (KITZINGER utility model), which ensures precise crate separation and an unobstructed impact of the washing solution for comprehensive cleaning of all sides. 2. Zone – Rinsing area: – The products cleaned in the machine are thoroughly rinsed from all sides with fresh water. The fresh water must be at least 45°C when fed to the machine and is heated to approx. 80°C in the system. Approximately 250-300 l are required per hour. Technical data: – Overall length of the base machine: 2000 mm – with crate turner: 2500 mm – with crate turner and discharge table: 2900 mm – Machine width: 620 mm Cedpfeza Dvusx An Njgu – Machine height: 1500 mm – Washing tunnel passage width: up to 430 mm (adjustable) – Washing tunnel passage height: 330 mm – Total heating power: boiler 1 x 10 kW – Pump power: 2.2 kW, 900 l/min at 1 bar – The housing is completely welded and consists entirely of stainless steel. The substructure is largely made of 3 mm sheet metal and is therefore very durable. The machine has the following connections: – Fresh water at least 45°C, 3/4″, – Flow pressure at least 1, max. 6 bar via hose connection, – Consumption approx. 300 l/h, IMPORTANT: the machine requires warm fresh water, connection 1/2″ or 3/4″ – Electricity 14 kW, 400 V, 50 Hz, 32A fuse – Wastewater DN 40 to floor drain or channel near the machine, below the machine tank with standpipe – with main switch – powerful centrifugal pump – system on stainless steel rollers – sloping discharge side for returning water to the bottom of the crates

Condition: like new (used), Year of construction: 2018, functionality: fully functional, CNC lathe HWACHEON HI-TECH 450B Cgedoyxnmcjpfx An Nou Year 10/2018, CNC FANUC Includes tooling, tool holder, and documentation The machine will be available from May.

Year of construction: 2010, operating hours: 4,000 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: N/A, Feature Details Codpfx Anjwm I S Is Nsgu Rotor Diameter 500 mm Rotor Length 3000 mm Rotor Speed 1000 rpm Drive Power 18.5 kW Screen Hole Size Standard: 2.5 mm; Max: 3 mm Housing Material Stainless Steel Rotor Material Mild Steel Bearing Type Flange Bearing Throughput (HDPE) Up to 3.5 tonnes per hour Throughput (PET) Up to 3.5 tonnes per hour Throughput (LDPE) Up to 2 tonnes per hour • Inclined cylindrical trough design for efficient washing and transport • High-speed paddle rotor generates friction to clean contaminants • Replaceable screen with automatic rinsing/self-cleaning system • Water injection system for enhanced cleaning performance • Easy maintenance with accessible rotor and screen

Condition: new, mileage: 70 km, power: 107 kW (145.48 HP), fuel type: electric, axle configuration: 4x2, wheelbase: 4,220 mm, fuel: electricity, color: white, driver cabin: day cab, gearing type: automatic, permissible axle load (axle 1): 1,850 kg, permissible axle load (axle 2): 2,100 kg, loading space length: 44,000 mm, loading space width: 21,000 mm, Year of construction: 2026, Equipment: ABS, EBS, air conditioning, central locking, cruise control, electric window regulation, power assisted steering, power mirror, trailer coupling, = Additional Options and Accessories = - Heated exterior mirrors - Passenger bench seat - Driver airbag - Remote central locking - Cruise control - Height-adjustable driver’s seat - Height-adjustable steering wheel - Air conditioning Codpfjw U N Tbsx An Negu - LED daytime running lights - Front center armrest - DAB MP3 Bluetooth 4.0 radio - Immobilizer - Heated windshield - Partition wall = Further Information = General Information Number of doors: 2 Year of manufacture: 2026 Cab type: single Axle Configuration Front axle: Max. axle load: 1,850 kg; Steering axle Maximum rear axle load: 2,100 kg Weights Unladen weight: 2,765 kg Payload: 735 kg Gross vehicle weight: 3,500 kg Condition General condition: very good Technical condition: very good Visual condition: very good

Condition: good (used), Year of construction: 2004, Ref. no.: 18255 Manufacturer: ENGEL Type: Victory 750 / 180 tech Year of construction: 2004 Clamping unit Clamping force: 180 ton Opening stroke: 750 mm Distance between tie bars: 960 x830 mm Mould height min.: 500 mm Opening width: 1250 mm Injection unit Screw diameter: 45 mm Injection volume: 318 cm³ Shot weight: 302 g Injection pressure: 1769/2360 bar Measurements and weight Machine weight: 13500 kg Robot Producer: Wittman Type: W743 Year: 2009 Further information: ENGEL Victory 750/180 Tech – Power, Flexibility and Reliability with Tie-Bar-Less Technology The ENGEL Victory series was specially developed for technical plastic processing and is known as a professional injection moulding machine series offering high energy efficiency and maximum mould flexibility. Unlike conventional tie-bar machines, this series provides a much more flexible working area thanks to its tie-bar-less clamping system. ⸻ 🔍 Advantages of the ENGEL Victory Series ✔ Tie-Bar-Less Design The biggest advantage of the world-renowned ENGEL Victory series is its tie-bar-less construction. This system offers several important advantages: • Larger moulds can be installed easily • Easier access for complex mould geometries • Reduced mould changeover times • Easier robot integration • More efficient use of production space This technology is especially advantageous for automotive, technical plastic parts, packaging and industrial applications. ⸻ ✔ Wittmann Robot Integration The machine has been operated together with a Wittmann robot. Robot specifications: • Wittmann W743-0424 • Year of manufacture: 2009 • Payload capacity: 25 kg • X-axis: 1200 mm • Y-axis: 1600 mm • Z-axis: 4000 mm This configuration provides major advantages for automated production processes. ⸻ 🔍 Machine Operating System The ENGEL Victory Tech series operates with a servo-hydraulic system. ✔ Hydraulic System: • Clamping unit • Injection movements • Ejector system • Mould movements Codpfxjwm Iz Ne An Njgu are driven by a high-performance hydraulic system. ✔ Thanks to the servo-controlled hydraulic system: • Only the required amount of energy is consumed • Power consumption is significantly reduced • Quieter operation is achieved • Production stability is improved Unlike older conventional hydraulic machines, the machine does not run continuously at full power. The servo pump system operates only when needed, providing the following advantages: • Lower energy costs • Reduced heat generation • Longer component lifetime • More stable processing conditions

Condition: used, Year of construction: 2007, Working area: 2780 x 1140 mm (vertical milling) 2500 x 950 mm (horizontal drilling) X-Y travel: 2980 x 1271 mm Z-axis travel: 200 mm Passage height: 180 mm The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. On this mobile unit carrier, the working unit is mounted on prismatic, ground guides and the recirculating ball slide. Description of the units and accessories (basic) Drilling unit: Drilling head with 10 + 4 spindles · 6 individually accessible vertical spindles in X · 4 individually accessible vertical spindles in Y · 2 horizontal spindles in X (1 + 1) · 2 horizontal spindles in Y (1 + 1) · Speed: 4,000 rpm · Power: 2.2 kW · Grid: 32 mm · Drill chuck: M 10 with 11 mm fitting · Extraction nozzle: D = 160 mm Vertical milling unit (position 2) · Tool chuck HSK 63F · Speed 1,500 - 24,000 rpm continuously adjustable via inverter · Motor power 4.4 kW (6 HP) from 12,000 rpm (S1) · Right-hand / left-hand rotation · Ceramic bearings · Scope of delivery: 4 tool chucks (right) without collet chuck · Tool changer · Side-mounted tool magazine 7-way (TR7) with full encapsulation to prevent chipping · 7 tool positions for HSK 63F tool holder arranged in a row · maximum tool diameter D=120 mm · maximum weight per holder 4.5 kg · maximum tool weight of all tools 20 kg (TR7) · angular gears can be accommodated Horizontal milling unit (position 1) Horizontal unit with two opposite outputs for milling and grooving. · Speed 9,000 - 18,000 rpm continuously variable via inverter · 1 output for collet 3-20 mm (ER 32) · 1 output for saw/collet 3-12 mm (ER20) (For saw D = 120 mm / bore 50 mm) · Motor power 3 kW (4 HP) · Max. tool diameter front milling: 20 mm · Max. tool length front milling: 110 mm · Max. tool diameter rear milling: 12 mm · Max. tool length rear milling: 80 mm · Max. saw blade diameter: 100 mm · Bore saw blade (ER 32): 50 mm · Mandrel diameter saw blade (ER 20): 12 mm Work table The work table is designed to guarantee the operator maximum freedom of movement. The vacuum quick clamping system ensures maximum flexibility with precise positioning and optimal grip of the workpieces. · 4 supports 900 mm continuously adjustable in X · 8 vacuum suction cups round D = 110 mm continuously adjustable in Y (2 per support) · 2 stops in X (1 x left / 1 x right) · 1 stop in Y per support (total 6) · The retractable reference stops are controlled via CNC. · Scope of delivery: 4 plug-on adapters for suction cups · Pendulum machining standard (2 working areas) Axis movement The drive system in X, Y and Z is carried out via ground ball screws of the highest precision class. The ball drive screw of the X-axis is located exactly in the center Cjdpfx Aox Twdyen Negu

Condition: used, Year of construction: 2006, · Working area: 2,650 x 1,240 mm · X-Y travel: 2,995 x 1,385 mm · Z-axis travel length: 200 mm · Clearance height: 180 mm C-axis deactivated – 3-axis machine The base structure is a monolithic construction made of thick-walled steel. It is reinforced throughout the entire machine bed with welded-in triangular plates, which makes it extremely stable. The use of the triangle shape with a broad base for load-bearing parts is the key to lasting precision and stability. The machine layout allows the operator an optimal workflow despite minimal space requirements. The resulting base frame thus provides the machining unit with a balanced and secure foundation, ensuring excellent load distribution. The mobile unit carrier is built as a solid monoblock. It is positioned in X-direction on ground prismatic guides with recirculating ball carriages. The working unit is again mounted on ground prismatic guides and a recirculating ball carriage on this mobile unit carrier. Description of aggregates and accessories (basic equipment) Drilling unit: Drill head with 12 + 6 spindles · 7 individually selectable vertical spindles in X Csdpfjx Twccjx An Nogu · 5 individually selectable vertical spindles in Y · 4 horizontal spindles in X (2+2) · 2 horizontal spindles in Y (1+1) · Speed: 4,000 rpm · Power: 2.2 kW · Grid: 32 mm · Drill interface: M 10 with 11 mm fitting Grooving saw unit in X: · Integrated in drill head · Grooving saw blade with max. diameter 120 mm Main milling unit (Position 2): · Tool holder HSK 63F · Speed: 1,500 - 24,000 rpm stepless via inverter · Motor power 4.4 kW (6 HP) from 12,000 rpm (S1) · Motor power 6.6 kW (9 HP) from 12,000 rpm (S6) · Clockwise/counterclockwise rotation · Ceramic bearings · Includes: 4 pcs. tool holders (right) without collet Tool changer R8L: Automatic tool changer for 8 tools. Mounted on the rear unit carrier for quick tool access. · Number of tool stations: 8 · Max. tool diameter: 120 mm · Max. weight per tool: 4.5 kg · Max. total weight all tools: 22 kg · Holder for 1 angle gear · Moves in X direction Horizontal milling unit (Position 1): Horizontal unit with two opposing outputs for milling and grooving. · Speed: 9,000 – 18,000 rpm stepless via inverter · 1 output for collet 3-20 mm (ER 32) · 1 output for saw/collet 3-12 mm (ER20) (for saw D=120 mm / bore 50 mm) · Motor power: 3 kW (4 HP) · Max. front milling tool diameter: 20 mm · Max. front milling tool length: 110 mm · Max. rear milling tool diameter: 12 mm · Max. rear milling tool length: 80 mm · Max. saw blade diameter: 100 mm · Saw blade bore (ER 32): 50 mm · Saw blade arbor diameter (ER 20): 12 mm Work table: The work table is designed to guarantee the operator maximum freedom of movement. The quick vacuum clamping system provides maximum flexibility for precise positioning and optimal holding of workpieces. · 6 supports, 1000 mm, steplessly adjustable pneumatically in X direction · 12 round vacuum cups D = 110 mm, steplessly adjustable in Y (2 pcs. per support) · 2 stops in X (1 left / 1 right) · 1 stop in Y per support (6 in total) · Retractable reference stops are CNC controlled · Pendulum machining standard (2 work zones) --- other clamping systems available as options --- Axis movement: The drive system in X, Y and Z is via ground recirculating ball screws...

Condition: new, Unused bin washer. Bought for a contract which never materialised. Cgsdetpv T Nspfx An Neu

Condition: excellent (used), mileage: 50 km, power: 107 kW (145.48 HP), fuel type: electric, gearing type: automatic, axle configuration: 4x2, wheelbase: 3,590 mm, first registration: 04/2025, emission class: euro6, color: white, driver cabin: day cab, number of seats: 3, Year of construction: 2026, Equipment: ABS, air conditioning, all-season tires, central locking, cruise control, immobilizer system, parking sensors, power assisted steering, sliding door, traction control, trailer coupling, = Further options and equipment = - Apple CarPlay - Automatic dipped headlights - Heated exterior mirrors - Front passenger bench seat - Third brake light - Electric windows - Electrically adjustable exterior mirrors - Driver airbag - Remote central locking - Cruise control - Wooden loading bed - Height-adjustable steering wheel - Wireless charging for mobile phones - Air conditioning - LED daytime running lights - Front centre armrest - DAB MP3 Bluetooth 4.0 radio - Rain sensor - Spare wheel - Reversing camera - Side sliding door - Immobiliser - Blind spot monitoring - Heated windscreen - Twin rear doors - Partition wall - Partition wall without window = Further information = General information Number of doors: 3 Cabin: single Registration number: V-40-LRF Technical information Transmission: 6-speed automatic Front axle: steerable Dimensions Length/Height: L4H3 Dimensions (L x W x H): 569 x 208 x 250 cm Cedpfov Iqm Ejx An Nsgu Weights Unladen weight: 2,278 kg Payload: 1,222 kg Gross vehicle weight: 3,500 kg Max. towing capacity: 2,000 kg (unbraked 750 kg) Interior Interior: grey Condition Technical condition: very good Visual condition: very good Number of keys: 2 (2 remote controls)

Condition: new, mileage: 60 km, power: 87 kW (118.29 HP), fuel type: electric, axle configuration: 4x2, wheelbase: 4,220 mm, fuel: electricity, color: white, driver cabin: day cab, gearing type: automatic, total length: 6,450 mm, total width: 2,100 mm, total height: 2,310 mm, permissible axle load (axle 1): 1,850 kg, permissible axle load (axle 2): 2,100 kg, Year of construction: 2026, Equipment: ABS, EBS, air conditioning, central locking, cruise control, electric window regulation, power assisted steering, power mirror, tail-lift, = Additional options and accessories = - Heated exterior mirrors - Passenger bench seat - Driver airbag - Remote central locking - Cruise control - Height-adjustable driver's seat - Height-adjustable steering wheel - Air conditioning - LED daytime running lights - Front center armrest - Radio DAB MP3 Bluetooth 4.0 - Reversing camera - Side door - Immobiliser - Heated windscreen - Partition wall = Further information = General information Number of doors: 2 Year of manufacture: 2026 Cab: single Cgedpfxswzizye An Neu Axle configuration Front axle: Max. axle load: 1,850 kg; Steered Maximum rear axle load: 2,100 kg Weights Gross vehicle weight: 3,500 kg Functional Tail lift: D'HOLLANDIA DH-LMA.08, tailgate, 750 kg Condition General condition: very good Technical condition: very good Visual condition: very good

Year of construction: 2003, operating hours: 1,800 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 0131202, DENVER Skema Tech Bridge Saw – Serviced Machine, Ready to Work We are offering for sale our DENVER Skema Tech bridge saw, due to upgrading our equipment to a newer CNC machine. Cedpfxjyu H Ucj An Nsgu 👉 Machine in perfect working condition, available for inspection and testing on site. Year of manufacture: 2003 Fully serviced by the manufacturer prior to our acquisition (October 2022) Maximum blade diameter: 500 mm Ideal machine for stone processing professionals seeking reliable, immediately operational equipment. 📍 On-site demonstrations available 📞 Do not hesitate to contact us for more information or to arrange a viewing.

Condition: excellent (used), Year of construction: 2006, SCM Z30 CNC Machining Center – Year of Manufacture 2006 – Fully Equipped – On Behalf of Customer For sale is an SCM Z30 CNC machining center from the year 2006. The machine is offered on behalf of a customer and was in operation in a carpentry workshop until recently. The SCM Z30 is a proven and robust CNC machine for furniture production and interior fittings, making it ideal for cost-effective manufacturing in everyday use. Technical Data: Manufacturer: SCM Model: Z30 Year of manufacture: 2006 Travel X-axis: approx. 3000 mm Travel Y-axis: approx. 1300 mm Travel Z-axis: approx. 150 mm Working area: approx. 3000 x 1300 mm Unit / Spindle: Cgodpeyl Numefx An Nju Main spindle: approx. 7.5 kW Speed: up to 18,000 rpm Equipment: Console table with vacuum system (pod and rail system) Automatic tool changer – fully equipped Integrated drilling unit CNC control (SCM) Rugged industrial build Applications: Furniture manufacturing Interior fitting Panel processing Single-item and series production Condition: Machine was in use until recently Fully functional Special features: Sale on behalf of customer Photos and videos available Inspection possible by arrangement Location: Germany If you are interested, please get in touch – we will be happy to send you further information, photos, and videos. Location: Ostfriesland region

Condition: new, Year of construction: 2025, clamping force: 6,500 kN, Equipment: documentation/manual, Clamping force: 650 t Screw diameter: 80 mm Distance between tie bars V: 1440 mm Distance between tie bars H: 1510 mm Opening min max: 450-950 Cgedpoza Au Njfx An Nju Shot volume: 1810 cm3 Type: Horizontal Drive: Hydraulic

Condition: used, mileage: 1,280,000 km, power: 324 kW (440.52 HP), first registration: 05/2003, fuel type: diesel, tire condition: 50 %, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: other, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro3, suspension: steel-air, total length: 6,000 mm, total width: 2,500 mm, total height: 4,000 mm, Year of construction: 2003, Equipment: ABS, air conditioning, differential lock, electric window regulation, spoiler, = Additional options and accessories = - 2 fuel tanks - 2 sleeping places - Armrest Cjdpfxoy I T Uke An Nsgu - Front suspension: Leaf - High sleeping cabin - Open roof - Rear suspension: Air - Sleeper cabin - Sper - Spoilers = More information = Tyre profile: 50% Brakes: disc brakes Front axle: Steering; Suspension: leaf suspension Rear axle: Double wheels; Differential lock; Suspension: air suspension General condition: moderate Technical condition: very poor Visual appearance: moderate

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 07156, We are selling our Hega unit due to relocation. The unit is in very good condition, well maintained, and fully operational. You are welcome to visit us to inspect the unit in person. The unit can be collected from our facility in Königsbach-Stein starting today. Dimensions: Length 9m, Width 2m, Height 3.20m including exhaust air extraction nozzle. Cgedpfx Anjyxwcge Nsu

Year of construction: 2007, condition: excellent (used), Inline can / jar washer & dryer Cjdpfoh Eazzex An Nsgu Completely stainless steel Container Max 180mm wide & 250 hight as-is or tested and adjusted to costomer needs