Used Notching Sawing Machine for sale (65,983)

Condition: used, Year of construction: 1996, 4.0 mm 3.0 mm Njdpfxjxabpds Adtola 30 - 120 Grad blade length 150 x 150 mm work height max. 900 mm table: 1000 x 650 mm engine output 3.0 kW weight 850 kg range L-W-H 1250 x 1000 x 1160 mm Furnishing: - Notching machine with angle adjustment 30° - 120° - Simple and functional "Touch Pad" control panel * Set-up stroke * Single stroke * continuous stroke - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - adjustable lift height adjustment - Waste bin - free-moving footswitch - Operation manual BOSCHERT angle adjustment: - the one-piece 30° upper knife is within one tool both with a left and directly connected to a right lower knife - once for each notch over 30° left and once on the right. - the swivel adjustment becomes pneumatic, immediately after completion of the first notch, lightning fast carried out.

Condition: new, plate thickness max. 5.0 mm tube diameter 27.9 - 61.0 mm motor 400 Volt total power requirement 2.2 kW Nsdexaardjpfx Adtela weight of the machine ca. 87.0 kg. The AL1-2E electric pipe notcher is started at the push of a button, and the pipe notcher is driven continuously. This means you can continue to work on new parts without having to switch the machine on again each time. With the electrically driven AL1-2E pipe notcher you can notch pipe outer diameters of Ø 26.9 (3/4?), Ø 33.7 (1?), Ø 42.4 (1 ¼"), Ø 48.3 (1 ½"), Ø 60.3 (2?). Do you often notch pipes? Then the electrically driven AL1-2E pipe notcher with the 2.2 kW electric motor is just right for you. The motor forms a unit with the special eccentric shaft that drives the notching tool. The motor is also equipped with an on/off switch with 0-voltage protection and a protective cap. Equipment: - electric motor pipe notching machine - for pipes 27.9 - 34.8 - 42.8 - 49.0 and 61.0 mm - operating instructions

Condition: used, Year of construction: 1990, Technical details: plate thickness: 8 mm cutting range: 300 x 300 mm Nlsdpfju Ictbex Adtea table-size: 1100 x 900 mm voltage: 380 V / Hz Weight approx.: 1,7 t dimension machine xH: 1,3 x 1,2 x 1,5 m For notching of 90° sheet metal segments, works hydraulically. On the table are 2x rulers 300mm 90° offset. T-slot according to DIN 680: a=12mm, h=21mm, b=22mm, c=14mm with length = 1x 330mm and 2x 700mm Operation via control panel and foot switch *

Condition: new, The TITAN 43/20 CD+E firewood processor with joystick control cuts logs with a maximum diameter of ø 43 cm using a harvester bar and splits them with a splitting force of 20 tons. This is a combination machine (electric and PTO connection). Demonstration and inspection by appointment possible – the machine is currently in stock and available immediately. Warehouse clearance – special price – interim sale reserved. Nlsdpfx Ajtrmg Hodtsa

Year of construction: 1994, condition: used, Double-end tenoner, edge processing machine, flush cutter, edge cutter, spindle motor, milling motor, saw unit, milling unit saw unit -Manufacturer: Paul OTT, saw unit from edge banding machine U 206 -Engines: Type K 14 -Power: 0.8 kW / 200 Hz -Speed: 1200 rpm -Saw blade: Ø 140 mm -Saw blade spacing: 515 to 1070 mm -Dimensions: 530/490/H600 mm -Weight: 78 kg Nledpfxeu Rv Ttj Adtea

Condition: new, Year of construction: 2026, power: 4 kW (5.44 HP), input voltage: 400 V, type of input current: three-phase, total height: 34 mm, total length: 2,350 mm, total width: 1,250 mm, overall weight: 1,250 kg, table height: 600 mm, coolant pump power: 60 W, cutting range round steel at 90°: 400 mm, cutting range square steel at 90°: 400 mm, saw band length: 4,650 mm, saw band width: 1 mm, ROGI SAWING MACHINE TYPE WDS-400 SEMI-AUTOMATIC Saw blade size ----- 4650 x 34 x 1.1 mm Sawing speeds ----- 19/30/50/65/90 m/min. Motor power ----- 4 kW - 400V - 3 phase Weight ----- 1250 kg Cutting capacity ----- 400 mm / 500W x 400H mm INCLUDES Bimetal band saw blade Workpiece stop Saw blade guide with carbide inserts Hydraulic clamp Coolant pump Hydraulic downfeed cylinder Motor protection switch Automatic end stop Nodpex N Iawefx Adtola

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1985, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, power: 4 kW (5.44 HP), overall weight: 1,200 kg, cutting length (max.): 200 mm, Selling our notching machine Nodpfx Adevld Hystsla FIM Versa 206 Machine can be tested under power at any time. TECHNICAL DATA ; Capacity: 200 x 200 x 6 mm steel ; Table dimensions: 1000 x 750 mm ; Blade length: 200 mm ; Angle adjustment: 30 - 60° / 60 - 135° Power: 4KW Total weight: approx. 1200kg

Condition: good (used), functionality: fully functional, Year of construction: 1997, Used variable angle notcher by Euromac Nlodpsx E U Awofx Adtoa Type Multi 220 6 Capacity 220 x 220 x 6 mm Equipped with radius cutting punch at the rear side

Condition: used, Year of construction: 1974, Technical details: total power requirement: 1,65 kW weight of the machine approx.: 620 kg Saw Blade Sharpening Machine Machine not complete - grinding spindle motor missing! Nljdowqplkspfx Adtja for sale as spare part dispenser! *

Year of construction: 1994, condition: excellent (used), Hydraulic notching machine Njdpehygztefx Adtsla Fab. BOSCHERT Type. K30-120 Very good condition, year 1994 Technical data Make BOSCHERT Type: K30-120 Year of manufacture: 1994 cutting capacity: 6 mm in St 40 / 4 mm in Niro blade length: 200 mm cutting angle: 30-120 working stroke: 40 mm table height: 900 mm Connected load: 6 kVA weight: approx. 1600 kg dimensions: approx. 1500 x 1200 x 1300 mm All data without guarantee. The machine is in a very good condition. A demonstration under power is possible at any time in our exhibition hall.

Condition: used, Technical details: total power requirement: 2,2 kW table-size: 500 x 780 mm working area: 250 x 250 mm height over floor: 940 mm Nodpfju Icq Tsx Adtola voltage: 380 V / Hz Weight approx.: 0,642 t dimension machine xH: 1,0 x 1,3 x 1,2 m HYDRAULIC NOTCHING MACHINE On the table there are left and right 90° linear scales length 250mm stop bars length 400mm; angle adjustable left/right 90°) operated by switch button and/or hand/foot control incl. tool 2x upper and lower knives built in (knife length 250mm) *

Condition: excellent (used), functionality: fully functional, Year of construction: 1993, machine/vehicle number: 398, control type: manual, degree of automation: manual, actuation type: hydraulic, sheet thickness steel (max.): 4 mm, sheet thickness stainless steel (max.): 3 mm, input frequency: 50 Hz, type of input current: three-phase, overall weight: 900 kg, cutting length (max.): 150 mm, Equipment: angle stop, foot remote control, Cutting performance (90° notch) - Normal steel: 4.0 mm Nledpfx Aevk I Avsdtea - Stainless steel: 3.0 mm Cutting angle: 30-120° Cutting length: 150 x 150 mm Working height: 900 mm Table: 1000 x 650 mm Motor power: 3.0 kW Weight approx. 900 kg Dimensions: 1250 x 1000 x 1160 mm (LxWxH) Equipment: - Angle adjustment 30° - 120 ° continuously - 2 digital displays for the adjustable stops * Set-up stroke * Single stroke * Continuous stroke - Plexiglass protection for better transparency - Hardened blades also for cutting stainless steel - Adjustable stroke height setting - Removable cutting container - Freely movable foot switch BOSCHERT angle adjustment: - the one-piece 30° The upper blade is directly connected to both a left and a right lower blade within a tool - for each notch over 30°, the notch is made once to the left and once to the right. - the swivel adjustment is carried out pneumatically immediately after the first notch has been completed. The machine can be demonstrated on site with power on. All information is provided without guarantee. Subject to errors and prior sale.

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Niederlande 788 € 3/4" 26,9 mm, 1" 33,7 mm, mm 3 mm 2.5 mm 8 kg The AL 1 can be used to notch pipes with an external diameter of 26.9 mm (3/4"), 33.7 mm (1") and 42.4 mm (1 1/4"). Nlsdpsyq Svdofx Adtoa The hand-operated machines can be easily wall h ALMI pipe notchers filing or milling pipes has become a thing of the past. The major benefit of this pipe notcher, compared to other notchers, is that one unit can be used to notch a series of diameters without needing to change parts for each diameter. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints.

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Niederlande 1032 € 1 1/4" 42,4, 1 1/2" 48,3 mm 3 mm 2.5 mm 15 kg The AL 3 can be used to notch pipes with an external diameter of 42.4 mm (1 1/4”) and Ø48.3 mm (1 1/2”). ALMI products are subjected to stringent quality control inspections before they leave the factory. ALMI’s pipe notcher, in contrast to punch-cutting machines with separate auxiliary tools, is always available for immediate use. Nsdpfx Aoyq Su Tsdtjla Moreover, the price is more affordable than the auxiliary tools for punch-cutting machines. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints.

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Niederlande 951 € Nlsdpfoyq Su Hex Adtoa 1 1/2" 48,3 mm, 2" 60,3 m mm 3 mm 2.5 mm 15 kg The AL 2 can be used to notch pipes with an external diameter of 48.3 mm (1 1/2") and 60.3 mm (2"). ALMI products are subjected to stringent quality control inspections before they leave the factory. ALMI’s pipe notcher, in contrast to punch-cutting machines with separate auxiliary tools, is always available for immediate use. Moreover, the price is more affordable than the auxiliary tools for punch-cutting machines. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints.

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Niederlande 853 € 20 - 76,1 mm 3 mm 2.5 mm Nsdpfx Aeyq Snysdtsla 7 kg The ALU can be used to notch a sink outflow in pipes with an external diameter of 22 mm to 76 mm. Since ALMI pipe notchers have a favourable price and high productivity they are an excellent investment. ALMI pipe notchers are available for cutting out venting slots in round and rectangular met pipes with an external diameter from 27 mm upwards and a wall thickness of a maximum of 3 mm. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are immediately available.

Condition: used, Blockrückenfräse (Einkerbmaschine) - Block Back Cutter and Notching machine Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Nlsdpfot Drmnox Adtoa On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1997, machine/vehicle number: 79, Abstanz- und Einkerbmaschine / Cutting and Notching machine Schmedt PräCut 65Baujahr / Year 1997 - Serial-No. 79 Book block height: up to 350 mm Book block thickness: up to 90 mm Air supply: 10 bar Power supply: 400 V / 50 Hz / 1,6 kW (three-phase) Nedolg Aahopfx Adtsla Output: approx. 250 - 350 pcs / hour Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), Year of construction: 1999, power: 5.5 kW (7.48 HP), input voltage: 400 V, We offer this very well-maintained Indumasch VA 200/6 K notching machine, year of manufacture 1999. Nlsdpfxeyrytme Adtoa Rated voltage: 400 V If you have any questions or require further information, please feel free to send us a message or call us.

Condition: new, Year of construction: 2026, CORMAK HBS275 band saw, equipped with a hydraulic cylinder, a cooling system and an arm swivelling up to 60º, together with blades from renowned German company Röntgen, is used commonly in ironworking, where precision, quality and cutting speed are essential. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or with any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Carbide guiding drastically reduces the wear of the machine and blades. Machine's arm made of uniform cast iron as well as a 27 mm wide cutting band are capable of low and high quantity cutting of profiles and other materials. The vice is located in an adjustable bed, equipped with a quick clamp. Blade guides have cemented carbide plates and roller bearings. Its these cemented carbide guides that provide cut precision and straightness. The arm, positioned at an angle of 25º, thus increasing blade durability, is equipped with an automatic blade tension sensor. To the bottom of the arm a brush wire is attached, ensuring clean and functional brush. Machine's drive is transmitted through a worm drive. A 3-phase motor with 2 cutting speeds and motor thermal protection. This cutting machine also has a strain gauge - a band tension sensor and an automatic switch-off in case the cutting band breaks. Upper part of the base constitutes a tank for flood coolant draining and chips produced during cutting. A cast iron workbench is attached to the base, with a swivel arm and control panel on separate arm. The main cutting move in the cutting process is moving the cutting band and the arm lowering feed. The arm lowering speed (the cutting speed) is adjusted with the hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 37.5 and 75 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Total power 1.5 kW Power supply 400V 50Hz Arm lowering control hydraulic cylinder Band dimensions 2455 x 27 x 0.9 mm Band speed 37.5/75 m/min Vice base height 900 mm Weight 215 kg Angle 0º ø220 260 x 140 200 x 200 45º R ø160 160 x 140 160 x 160 Njdpsudi Unofx Adtola 60º R ø100 120 x 100 100 x 100

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Nlsdpfx Adomck Rystoa Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Condition: new, Year of construction: 2026, Powerful Band Saw equipped with a movable arm that can rotate from -45° to +60°, a portable vice with quick-locking mechanism, a strain gauge for band tension, and a hydraulically adjustable arm with smooth regulation. Additionally, it features an ergonomically designed control panel, ensuring safety and comfort during operation. The maximum cutting width is 490 mm. Key Features of the Band Saw: The band tensioning wheel is equipped with a dial strain gauge that indicates the proper band tension, ensuring optimal results and blade durability. The saw frame is rigid, made of cast iron, and resistant to twisting. High-quality drive wheels are mounted inside, on which the cutting band is mounted. The control panel is ergonomic, with clearly placed buttons such as the main switch, start, stop, cooling, and band speed control buttons (slow/fast). Additionally, the panel features an emergency stop button that complies with the latest EU safety standards. The panel column contains hydraulic actuator controls, enabling precise regulation of the arm's descent speed and turning it on/off. The drive is stable, thanks to high-quality hardened and ground gears. The powerful motor is appropriately matched to the sizes of the materials being cut. The band’s guidance is reliable due to bearings in the guides that can be adjusted according to the width of the material being cut. The saw is equipped with a mechanism for automatic shut-off when the arm is lowered. The vice is solid and securely holds workpieces. A limiter for cutting workpieces is included in the set. The hydraulic actuator is reinforced, allowing precise adjustment of the arm's lowering speed using a potentiometer. The saw arm can rotate from -45° to +60°, with the lifting force adjusted using a spring. An efficient cooling system is built into the base of the saw. Workpieces can be quickly clamped in the vice. The vice can be adjusted on both sides, enabling cutting at different angles. Nljdpev R Tgtsfx Adtja The set includes a coolant tank with a pump. The saw’s solid body is made of cast iron, ensuring stability during cutting. The band saw's arm can be locked. The base is rigid, allowing operation at a height of approximately 95 cm, which is standard with the saw. Additional Advantages of the Band Saw: Other features include band speed regulation (35/70 m/min), quick-lock vice, movable saw arm from -45° to +60° with a scale reading, a fully functional device with an excellent price-to-quality ratio, a solid construction ensuring precise, quiet, and vibration-free operation, infinitely adjustable hydraulic arm lowering, durable carbide roller guides, reinforced worm gear with bronze components, automatic end switch, and a liquid cooling system as standard equipment. Technical Specifications: Working height: 870 mm Cutting speed: 35/70 m/min Band saw dimensions: 3770 x 34 x 1.1 mm Band saw width: 34 mm Cooling system pump power: 0.1 kW Total power: 2.8 kW Voltage: 400V Dimensions (width x depth x height): 2200 x 1400 x 1500 mm Weight: 630 kg

Condition: good (used), Notching milling machine Nledpfx Aob A Hlaedtoa -automatic hydropneumatic milling feed -for milling cutters max.: Ø 250 mm

Condition: good (used), Notching milling machine Nljdpfxeb A H Hfo Adtea -automatic hydropneumatic milling feed -Maximum cutter diameter: 250 mm

Condition: new, Year of construction: 2020, machine/vehicle number: MR006644, This SVP950 is a powerful vertical panel saw. The machine is equipped with, among other features, variable speed control on the saw unit. This SVP950 is a robust vertical panel saw machine. It features variable speed control on the saw unit and is equipped with digital readouts for both horizontal and vertical cutting. The SVP950 offers a cutting depth of 80 mm and is powered by a strong 7.5 HP motor, making it suitable for processing thicker materials. It is also suitable for plastics, where a lower speed is desired. This is an ex-showroom machine directly from the manufacturer, allowing us to offer it at a competitive price with a full new-machine warranty. The machine is equipped with the following options: - Rear support wall for small workpieces - Variable speed: 2,000 – 6,000 rpm - Electronic display for horizontal measurement indication - Electronic display for vertical measurement indication - ECO extraction system: channeled extraction during vertical cutting Technical specifications: - Maximum cutting length: 5300 mm - Maximum cutting height (horizontal): 2100 mm - Maximum cutting height (vertical): 2200 mm - Maximum cutting depth: 80 mm - Maximum saw blade diameter: 300 mm - Motor power: 7.5 HP - Serial number: 20950017 Nodsx S U I Hjpfx Adtola