Used Noyens Semi Low-Loader for sale (18,979)

Condition: new, maximum load weight: 36,500 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website. Excerpt from the equipment Complete equipment available upon request GOOSENECK * Designed in SNT to optimize the loading area length * Length approximately 3,700 mm, with a rear slope of approximately 1,000 mm x 6° For SZM: 4 x 2 and 6 x 2 * ASPÖCK-UNIBOX Grid floor with 5 mm sheet metal reinforcement on the gooseneck and the rear slope * 2-inch kingpin * Guide plate from the gooseneck for the fifth wheel plate, approximately 500 mm wide, round * NATO socket on the connection strip at the front on the gooseneck * 1 pair of pluggable aluminum side panels, approximately 400 mm high, in anodized design * 1 LED work light each on the left and right, mounted at the top of the front wall * Controlled via on/off switch (operation of the work lights from the SZM is not possible in this case) LOADING AREA * Length approximately 9,600 mm, with a rear slope of approximately 900 mm x 6° * Loading area after the gooseneck can be hydraulically raised and lowered, length approximately 3,000 mm * Load capacity up to approximately 9,000 kg on the lifting platform and the loading area, continuous grid floor with approximately 5 mm sheet metal underlay as additional reinforcement, designed for point load TIRES * 235/75 R 17.5 3PMSF, twin tires, manufacturer of our choice * TPMS tire pressure monitoring system in accordance with ECE R 141 AXLES * BPW axles and suspension * 1st and 2nd axles rigid * 3rd axle with trailing steering * 3rd axle with electro-magnetic reverse lock, activated via reverse gear and manually * 1st axle with start-assist * Technical axle load: 12,000 kg each AIR SUSPENSION * with raising and lowering valve HYDRAULIC LOADING RAMPS * 1 pair of two-piece AXS steel ramps with grid floor and a length of approximately 4,920 mm and a width of approximately 900 mm * Hydraulically foldable ramp tips, ramps can be individually moved hydraulically outwards by approximately 235 mm and inwards by approximately 365 mm * Flashing lights on the outer sides of the ramp tips, with a switch next to the ramp control * Ramp securing in driving position by means of a quick-release fastener * Painted sand coating on the outer frame of the ramp as well as on the ramp tip * Mechanical supports in drop tube design on the sides of the ramps to support when docking with loading ramps * Control valves for the hydraulic ramps on the right side of the vehicle Bjdpfxezzhfue Al Ajdh BRAKE SYSTEM * From WABCO EBS-E according to EU regulations SURFACE TREATMENT * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure the best corrosion protection PAINTING * Semi-trailer carmine red (RAL 3002) * Rims silver gray, side panels aluminum natural * Wheel hubs according to axle manufacturer, lamp sign pure white (RAL 9010) EQUIPMENT * Front wall made of steel, pluggable, approximately 1,600 mm high * Including connection strip for supply lines to the SZM, mounted approximately 1,000 mm from the lower edge of the outer frame profile * Possibility to attach lashing chains on the inside of the front wall on the left and right * Including aluminum tray underneath on the left and right for storing chains or lashing straps behind the front wall, approximately 12 mm thick DELIGNIT surface, screwed on * 2 pairs of screwable lashing rings additionally (LC 5,000 daN) * Electric winch, approximately 5,400 kg pulling force, with

Condition: used, empty load weight: 16,400 kg, maximum load weight: 28,600 kg, overall weight: 45,000 kg, axle configuration: 3 axles, first registration: 04/2016, loading space length: 12,400 mm, loading space width: 2,450 mm, suspension: air, color: green, gearing type: other, driver cabin: other, Equipment: ABS, hydraulics, * German complete vehicle from a single owner * Doll heavy-duty low-loader with detachable gooseneck + electric ramps * including MB 2663 heavy-duty semi-trailer tractor 6x4 from the year 2016 * MB 2663 with large hydraulics, retarder, sleeper cab * Trailer with detachable gooseneck * Payload 35,570 kg * electric, hydraulic loading ramps * complete vehicle from a municipal previous owner * Panther chassis technology * 3 BPW axles, steered * all axles with hydraulic axle equalization * municipal previous owner * laterally positioned driving surfaces * total length 16.61 meters * low-bed length 8.4 meters + 4 meters of extension at the rear * loading height 300 mm * width 2.55 meters * DOLL tronic® - an intelligent operating and control system based on CAN bus. With its sophisticated sensors, it provides easy and safe operation of all central trailer functions. Colored LEDs clearly show you the position of your vehicle. - High-quality keypads at the rear and gooseneck - Control of all functions: gooseneck, steering, driving level - Permanent monitoring of positions - Integrated into the system: operation of the ramps and monitoring of the central lubrication system * Comfortable operation of steering and driving level via keypads and DOLL connect® remote control * Loading ramps, length 2.5 meters - hydraulically adjustable and movable with remote control * Excellent off-road capability with a maximum steering angle of 55° * Single-wheel suspension, hydraulic forced steering and with electro-hydraulic auxiliary steering * Always a horizontal platform thanks to the hydraulic axle equalization * Easy maneuvering in confined spaces and on difficult terrain * Perfect road handling even at low ride height and high load center of gravity * Lashing eyes * Axle load 3 x 12,000 kg * Axle spacing to 1/2/3 axle 1.36 meters * Rotating beacon * Drum brakes * Axles BPW Eco * Storage box * Semi-trailer load 21,000 kg If a new TÜV inspection is desired, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without a new DGUV, without a new SP, without a new UVV. Bdedpfszk Rchox Al Aoh You can find more trucks on our homepage at: We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and examination of the goods so that no false impressions arise in the buyer about the condition and suitability. Inspections and examinations are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Changes, interim sales and errors excepted.

Condition: used, empty load weight: 5,300 kg, maximum load weight: 18,700 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 11/2014, loading space length: 9,400 mm, suspension: steel, tire size: 205/65R17,5, color: other, gearing type: other, front tire size: 205/65R17,5, rear tire size: 205/65R17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading height approx. 900 mm, loading area length approx. 9,400 mm, tie-down points. -- Subject to printing errors, errors and changes. Sample images. -- More data available at: !, More details: ! Bsdpfez H Iuqex Al Aodh

Condition: new, maximum load weight: 36,410 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Bdodey Auh Ijpfx Al Aeh Extract from the equipment. Full equipment details available on request. GOOSENECK: * Gooseneck in SNT design for optimized loading platform length, length approx. 3,700 mm, rear with taper approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Steel front wall, removable, approx. 400 mm high * ASPÖCK-UNIBOX * 3 kW electro-hydraulic power unit for hydraulic functions, excluding hydraulic winches * Approx. 40 mm thick hardwood decking above the gooseneck * 2-inch kingpin * Gooseneck guide plate for the fifth-wheel plate, approx. 500 mm wide * Bracket at the rear of the gooseneck for ALU loading ramps * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * 4 wheel chocks with holders in front of the front wall * 1 pair of stake pockets recessed on the gooseneck for plug-in stakes approx. 100 x 50 mm (located on the inside of the chassis rail) EQUIPMENT: * Loading platform length approx. 8,800 mm, extendable version approx. 4,100 mm, with rear taper approx. 500 mm x 10° * A recess in the loading platform, extending into the tapered section to accommodate the excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Pneumatic locking with conical locking bolts and reinforced locking positions, supply lines are protected inside the extendable beams and automatically adapt to the selected loading platform length * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, 1st and 2nd axles rigid, 3rd axle steered * 3rd axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: each 12,000 kg with air suspension and raise/lower valve * 235/75 R 17.5 3PMSF twin tires. Manufacturer at our discretion * Mechanical landing legs with 2-speed gearbox and crank. JOST Module B – static test load = approx. 50,000 kg * Throughout the loading platform and between the axles, interrupted approx. 50 mm thick hardwood decking (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the telescopic tube with large cross-section. Intermediate table with offset loading platform and extendable mounting rails for aluminum bridging elements * Platform locking with conically welded locking profiles every approx. 250 mm. Includes pre-tensioning plate * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the loading area, foldable outwards (LC 10,000 daN) * 1 pair of fixed wheel recesses in front of the axles, open up to the gooseneck cross member, approx. 700 x 410 mm (W x D) * Wheel recesses with 15 x 15 mm square climbing strips and widenings at the bottom (in case vehicle is equipped with extendable widenings) * 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the platform between 1st and 2nd axle * Wheel recesses with 15 x 15 mm square climbing strips and widenings at the bottom * Aluminum covers for the wheel recesses in front of the axles and between the 1st and 2nd axle, which can also be used as widening planks (if vehicle is equipped with extendable widenings) * Lockable aluminum elements installed on the extension tubes of the widenings * 1 pair of mechanical rear supports * 1st axle with traction aid * Sandblasting painted...

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, suspension: air, tire size: 385/65 R22,5, KRONE SD refrigerated trailer | Carrier 1550 deep-freeze unit | KRONE axles with disc brakes | Toolbox | Spare wheel holder | Temperature recorder | Pallet box | Lifting axle | Double-deck. Subject to errors and prior sale. Bedpfx Alexghkhe Asdh

Condition: new, overall weight: 80,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, More vehicles available. Excerpt from the equipment list below. Full equipment details on request. GOOSENECK: * Gooseneck in SNT design, optimized for loading platform length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * Suitable for tractors: 4 x 2, 6 x 2, and 6 x 4 * Detachable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection rail with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic unit for controlling all hydraulic functions except hydraulic winches * Gooseneck outer rail with mounting holes for screwable lashing rings. First hole approx. 200 mm from front, then approx. every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings at rear part of gooseneck (LC 10,000 daN) * On the gooseneck: 1 pair of plug-in aluminum side walls, approx. 400 mm high, anodized finish * On the gooseneck: 1 plug-in aluminum rear wall, approx. 400 mm high, anodized finish * Approx. 40 mm hardwood floor covering on gooseneck, checker plate covering over kingpin * 3.5-inch kingpin * Gooseneck guide plate for the fifth wheel, approx. 500 mm wide * Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) * 2 pairs of lashing rings with retention spring hanging on the outer rails of the gooseneck (LC 5,000 daN) LOADING PLATFORM: * Extendable loading platform, length approx. 8,800 mm with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical lock bolt and reinforced locking positions; supply lines routed securely inside the extendable rails, automatically adapting to the current platform length * BPW axles and suspension; 1st axle steerable, all others force-steered via hydro-mechanics * 1st axle with electro-magnetic reverse lock, activated via reverse gear and manually Bjdpfjxarmaex Al Ajdh * Technical axle load: 12,000 kg each * Air suspension with lifting/lowering valve * 235/75 R 17.5 3PMSF twin tires – brand at our discretion * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B – static test load 50,000 kg * Full-length hardwood floor, interrupted between axles, approx. 50 mm thick (increases slip resistance). – Long slots for removable and repositionable bridging elements * At the front of the platform – 1 movable intermediate table, approx. 300 mm wide, for the large-cross-section sliding tube, with checker plate covering. – Front and rear with long slots for removable and repositionable bridging elements * 1 pair of lashing rings on front cross member (LC 10,000 daN) * 7 pairs of flush-mounted, fold-out lashing rings in the outer frame of the platform (LC 10,000 daN) * Extendable (galvanized) widened sections, approx. 230 mm per side (without wooden planks) * 1 pair of mechanical rear supports * Rear steering operable from front and rear via cable remote control, with single-track control of axles, without installation on the tractor * TPMS tire pressure monitoring sensors fitted to all wheels * Deck locking with conically welded locking profiles every 500 mm * Lock monitoring left and right on the trailer * Mechanical lock for intermediate table (approx. 300 mm wide) to secure the table when extended * 5 pairs of threaded blocks mounted on the extendable rail for the installation of M20 screw-in rings (LC 5,000 daN) BRAKING SYSTEM

Condition: new, maximum load weight: 27,000 kg, overall weight: 36,000 kg, axle configuration: 3 axles, Year of construction: 2026, Equipment: ABS, crane, Step-frame semi-trailer in roll-off tipper design Bsdpfx Ajzirgxel Ajdh 3 axles with disc brakes SAF axles Lift axle Tires 385/55 R 22.5 Gear-driven winch LED lighting Work lights 25-ton capacity in sliding/articulated design for container lengths up to 7,500 mm Roller height approx. 1,300 mm Hydraulic internal locking Soft stop Quick release Fifth wheel as loading platform with side boards 1 unit available in stock. Different equipment/design available on request. Further information available on request.

Condition: new, maximum load weight: 67,200 kg, overall weight: 85,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Bedsrgzv Nspfx Al Aedh Excerpts from the equipment. Full specifications available upon request. GOOSENECK * Gooseneck in SNT design to optimize load floor length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractors: 6 x 2, 6 x 4, and short 8 x 4 * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized * 1 plug-in aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm thick hardwood flooring above gooseneck, checker plate flooring above kingpin * 3.5 inch kingpin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, including bracket for hanging supply lines (Faymonville couplers) * 2 pairs of stake pockets recessed in the gooseneck, for plug-in stakes approx. 100 x 50 mm LOAD FLOOR * Extendable load floor, approx. 11,000 mm long, with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical locking bolts and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective deck length * BPW axles and suspension, 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Axle load capacity: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous and, between axles, interrupted approx. 50 mm thick hardwood floor on load deck (increases coefficient of friction) * Slotted holes for attachable and repositionable bridging elements: – at the fixed part behind the gooseneck – on the front of the load floor * 1 sliding intermediate table, approx. 500 mm wide, for the sliding tube with large cross-section, checker plate flooring, front and rear with slotted holes for attachable and repositionable bridging elements * 1 pair of recessed flat lashing rings in the front fixed part of the load floor (LC 10,000 daN) * 9 pairs of recessed lashing rings, foldable outward, in the load floor perimeter frame (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation required in the tractor * 1st axle with automatic lift axle function and start-up assist according to EU Regulation 2021/535 * Under the gooseneck and at the rear cross member, left and right, a 7-pin socket each with holder for warning signs * Factory-applied sand coating on the perimeter frame of the load floor as well as the checker plates and the transition area between load decks

Condition: used, maximum load weight: 37,530 kg, overall weight: 50,000 kg, axle configuration: > 3 axles, first registration: 02/2012, next inspection (TÜV): 11/2026, total width: 3,000 mm, total height: 3,780 mm, Equipment: ABS, * Gooseneck with side rails (foldable) * Low-bed length: 11950 mm - 15450 mm * Low-bed extendable in stages by 3500 mm * Low-bed width adjustable by 460 mm * Hydraulically adjustable loading ramps (2-part) * Stake pockets * Wabco SmartBoard * 4 axles with twin tires * 1st axle liftable * 3rd and 4th axles with trailing steering * Chocks ----* Tire size: 235/75R17.5 Bedpfx Alsy T Dyzj Aedh * Technical total weight: 58000 kg * Tare weight: 12470 kg * Overall length: 13700-17200 mm * Overall width: 2540-3000 mm * Next inspection due: 05.2026 ----Vehicle number: 12062----Errors and prior sale excepted.----Advertisements and various lettering have been digitally removed.----We are happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional fee: * Trade-in of your old vehicle * Inspection (HU/SP) * Complete export processing * Arranging financing * Applying for export license plates * Vehicle transport * Vehicle registration * Recovery and vehicle transport ----Your VTS Team

Condition: used, empty load weight: 7,340 kg, maximum load weight: 22,660 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 05/2012, loading space length: 9,200 mm, suspension: steel, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading area length approx. 9,200 mm, loading height approx. 900 mm, 16 x lashing eyes, , Vehicle is sold on order , , , -- Subject to misprints, errors and alterations, sample pictures --, More data under: !, More Details: ! Bsdpfx Aljz H T R Ds Ajdh

Condition: new, maximum load weight: 30,190 kg, overall weight: 43,000 kg, axle configuration: 2 axles, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment list. Full equipment details available on request. Loading Platform: - Lowbed with external beams in extendable SUPER LOW design, length approx. 6,850 mm - Lowbed with fixed hardwood floor approx. 40 mm thick and mechanical locking mechanism - Supply lines protected inside the extendable side rails, automatically adjusting to the current bed length - 5 pairs of lashing rings, foldable outward (LC 10,000 daN) - 6 pairs of threaded blocks on the inner beam for attaching RUD screw-on rings Gooseneck: - Gooseneck in SNT design for optimized platform length, length approx. 3,750 mm - Gooseneck hydraulically liftable/lowerable and detachable - Technical fifth wheel load: 23,000 kg - For tractors: 4x2, 6x2 Rear Chassis: - Rear chassis in short version with closed external frame and checker plate cover - Running gear with excavator recess, closed in the rear half to accommodate the air tanks - 2 pairs of lashing rings, foldable outward (LC 5,000 daN) - 1 pair of lashing rings, foldable outward (LC 10,000 daN) - 1 pair of lashing rings horizontal, front & rear of the chassis (LC 10,000 daN) Axles: - BPW axles, hydro-mechanically forced steering - Technical axle load per axle: 12,000 kg - Air suspension with lift and lower valve Tyres: - Tyres 245/70 R 17.5 3PMSF - Manufacturer of our choice - Load index (146/146F) - TPMS tyre pressure monitoring system in accordance with ECE R 141 - Data transmission to the truck via the standardized EBS interface in accordance with ISO 11992 - The truck must be capable of processing and displaying this data for correct operation Braking System: - Braking system according to EU regulations with EBS-E (2S2M) Electrical System: - Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with indicators - ASPÖCK-UNIBOX at the front connection point with 24N, 24S, and 15-pin sockets as per standards: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Steel Construction: - Steel construction from high-strength fine-grained steels - Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Paintwork: - Complete steel structure is automatically shot-blasted after welding using a blasting turbine system - Second blasting process with corundum for optimal adhesion of coating system - HRM metallization of complete chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure maximum corrosion protection - Final paint finish with 2 coats of 2K topcoat, single color in RAL 3002 Carmine Red, as per RAL system 841GL - Rims in silver - Rear section metallized and painted RAL 9010 (Pure White) - Metallic paint not possible - Paint system tested in salt spray test as per ISO 9227-NSS - Cavities sealed with special wax Including the following additional equipment: - 2" King pin - One galvanized steel front wall, approx. 400 mm high Bedjxarl Nepfx Al Aodh - Remote steering of front and rear axles by cable remote control with pushbuttons, including single track axle monitoring (without installation in the tractor unit) - Hydraulic connections from gooseneck to lowbed with multi-coupling instead of screw couplings - Electro-hydraulic power pack - Preparation for mounting container locks for 1x 20' or 1x 40' container on the external beams - Without container locks

Condition: new, maximum load weight: 90,700 kg, overall weight: 126,000 kg, axle configuration: > 3 axles, total width: 2,850 mm, Equipment: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Extract from the specifications. Complete equipment list available upon request. Gooseneck: Gooseneck hydraulically liftable/lowerable and detachable. Length approx. 3,650 mm. For tractor units: 6x4 or 8x4 3-axle compact front bogie: * Hook mounts at the front and rear. Length: approx. 3,560 mm * Chassis width: approx. 2,850 mm Lowbed: * Lowbed ATX-A with telescopic longitudinal beams in low design with fixed hardwood floor approx. 50 mm thick * With drive-over bridging hooks at the front and pin-lug coupling at the rear * Base width: approx. 2,850 mm, Length: approx. 7,150 mm, Beam height: approx. 330 mm, Beam width: approx. 750 mm * Loading height approx. 480 mm with ground clearance approx. 150 mm 5-axle rear bogie: * Mechanical pin-lug coupling for mounting a lowbed at the front, rear end traverse at the back * Chassis width: approx. 2,850 mm * Chassis length: approx. 6,840 mm * Pendle axle 3-axle front bogie: * PENDLE-AXLE, all axles hydro-mechanically forced steered * Hose rupture valve on axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off cocks and lock pins for securing in raised position * Final painting of axles with 2 coats of 2-component paint, single color in MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Front bogie tires: 12 x manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J 5-axle rear bogie: * PENDLE-AXLE, all axles hydro-mechanically forced steered * Hose rupture valve on axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off cocks and lock pins for securing in raised position * Final painting of axles with 2 coats of 2-component paint, single color in MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Rear bogie tires: 20 x manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure optimal corrosion protection * Final coat with 2 layers of 2-component topcoat, single color in RAL 3002 Carmine Red, according to RAL system 841GL Includes accessories: * Steel front bulkhead, approx. 400 mm high * Plug-in ALU side and rear boards on the gooseneck, approx. 400 mm high, anodized finish * 3.5 kingpin * BEKA-MAX central lubrication for one gooseneck * Multi-coupling hydraulic connections at the gooseneck * Front bogie with a separate air connection for pneumatic screwdriver * BEKA-MAX central lubrication for a 3-axle bogie * Preparation for mounting of bolt-on container locks for 1 x 20' or 1 x 30' containers on the outer beams * Without container locks * Mounts for foldable extensions outside on the outer beams of the loading area * One 7-pin socket left and right, front and rear on the rear bogie for warning signs * BEKA-MAX central lubrication for a 5-axle bogie * Socket on the rear bogie for the cable remote control of the steering override * Rear bogie with trough * 2 LED reverse lights mounted on the rear panel * European reflector panels (red-yellow) at the rear * One mud flap at the rear Bdsdpfx Ajw Tgp Dol Aoh * One LED beacon with bracket left and right on the rear traverse * Two INOX toolboxes 855 x 340 x 390 mm on the gooseneck, left and right * 1-cycle

Condition: used, maximum load weight: 38,170 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 08/2015, loading space length: 13,085 mm, loading space width: 2,550 mm, total length: 13,300 mm, total width: 2,550 mm, total height: 3,700 mm, Year of construction: 2015, Equipment: ABS, ES-GE 3-Axle Lowboy Semi-Trailer | Extendable | Wheel Recesses | Aluminum Ramps | Lift/Steering Axle Description: For sale is a high-quality and extremely versatile ES-GE 3-axle lowboy semi-trailer from the initial registration year. The vehicle stands out due to its extensive special equipment, which enables maximum flexibility in the transport of heavy construction machinery, wheel loaders, excavators, and containers. Thanks to the extendable loading platform and the integrated wheel and excavator recesses, the semi-trailer is equipped for virtually any challenge. Vehicle Data & Weights: First Registration: 08/21/2015 * Permissible Total Weight: 48,000 kg * Axle Load: 30,000 kg (3 x 10,000 kg) Bdedjz Edhqepfx Al Aoh * Fifth Wheel Load: 18,000 kg * Fifth Wheel Height: 0.95m Dimensions & Chassis: Overall Length: approx. 13,085 mm (extendable by max. approx. 4,060 mm) * Loading Platform Length / Height: approx. 8,750 mm / approx. 860 mm (loaded) * Width: approx. 2,550 mm (extendable by means of galvanized brackets to approx. 3,000 mm) * Chassis: High-strength fine-grained steel (suitable for point load 30 t on 4 m) * Floor: Robust hardwood floor (approx. 38 mm), checkered plate covering above the axle assembly * Paintwork: Solid color in RAL 5010 Blue, rims in silver Suspension & Axles: Axles: 3 x 10,500 kg Gigant axles, air-suspended with lifting and lowering function * 1st Axle: Designed as a lift axle * 3rd Axle: Designed as a trailing steering axle * Braking System: Two-line braking system (ABS-EBS), Knorr brake TIMG2 (Smart-Board) * Tires: 12-ply, 235/75 R 17.5 * Tire Tread Depth: 1=80% 2=60-80% 3=30-60% Special Equipment & Highlights: Ramps: 1 pair of 2-piece aluminum ramps (approx. 2,900 + 1,450 x 600 mm), hydraulically liftable and lowerable, mechanically movable (load capacity approx. 15,000 kg/piece) * Wheel Recesses: 2 pairs of wheel recesses in the lowbed including matching aluminum covers * Excavator Recess: Integrated excavator recess at the rear between the axles (approx. 650 x 2,000 x 300 mm) * Container Locking: 2 pairs in the loading platform (for 2x 20' and 1x 40' containers), 1 pair on the gooseneck, and 1 support leg for the front wheel recess * Weight Optimization: Front supports and air tank made of lightweight aluminum instead of steel * Load Securing: 9 pairs of stake pockets in the outer frame, 1 row of stake pockets transversely on the gooseneck, numerous swivel lashing points (6 t WLL / 12 t LC) * Lighting & Safety: LED taillights, LED side marker lights, 2 LED reversing lights, 4 retractable LED widening lights (up to approx. 4,500 mm width) incl. night parking signs * Corrosion Protection: High-quality treatment with zinc dust primer (90%) according to DIN/ISO 12944 * Pneumatics: Couplings in comfortable "DUOMATIC" design The vehicle is in an operational condition. Sale is from the location. For further questions, detailed pictures or to arrange a viewing appointment, please do not hesitate to contact us! New main inspections / safety checks or weight reductions/increases are possible upon request. We will be happy to assist you in obtaining export/transfer license plates; a transfer of your purchased vehicles within the Federal Republic is also possible. Contact us! ---- We speak the following languages: German, English and Russian! ---- No liability for printing & typographical errors, changes, prior sale and errors reserved! ---- Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl on the Rhine. Than

Condition: used, empty load weight: 8,704 kg, maximum load weight: 27,296 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 02/2024, next inspection (TÜV): 02/2027, loading space width: 2,500 mm, loading space height: 2,600 mm, total length: 2,600 mm, total width: 4,000 mm, suspension: air, tire size: 385/65 R22.5, Equipment: ABS, | Krone Cool Liner refrigerated semi-trailer | Double-deck | Flower width, lift axle | Krone axles with disc brakes | Toolbox | 2x spare wheel holders | Pallet box | ThermoKing SLXi 300 refrigeration unit | Tires: 385/65 R22.5 | Diesel hours: 1659h | Errors, input errors and prior sale are subject to change. Bdodoz Hvthjpfx Al Ajh

Condition: new, maximum load weight: 25,300 kg, overall weight: 38,000 kg, axle configuration: 2 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately or at short notice, on our website. Excerpt from the equipment details. Full specifications available upon request. Neck (Gooseneck) * Gooseneck in SNT design to optimize loading platform length * Approx. 3,750 mm long, hydraulically liftable/lowerable and detachable * Technical fifth wheel load: 25,000 kg For tractors: 4x2 and 6x2 Kessel Bridge (Tiefbett section) * Low bed designed as extendable Kessel bridge in SUPER LOW design * Approx. 6,850 mm length * With mechanical locking * Service lines routed protected inside the extendable beams, automatically adjusting to match the low bed’s length Rear Chassis * Short version with closed outer frame and checker plate cover * Chassis with excavator trough, closed at the rear half to accommodate air tanks Axles * BPW axles and suspension, all axles hydro-mechanically forced steered * Technical axle load: 12,000 kg per axle * Air suspension with lifting and lowering valve Tires * GOODYEAR KMAX T 3PMSF (M+S) 245/70 R 17.5 twin tires. Load index 143/141J (146/146F) Bodpsv Sw E Aefx Al Aedh Brake system * Brand: WABCO, EBS-E according to EU regulations, without connection cable to the tractor unit Paintwork * 6-Coat final treatment * All-steel construction shot-blasted after welding * 1 layer of zinc-based primer * 1 layer of adhesion primer. Final coating with 2 coats of 2-component acrylic paint in a single color, followed by cavity sealing with special wax Trailer color * RAL 3002 Carmine Red * Rim color: Silver grey * Drop side color: Natural aluminum Accessories included * Removable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for hydraulic operations (except for hydraulic winches). Without supply connection installed on tractor unit * Spare wheel carrier in front of the gooseneck front wall * Side beams of the gooseneck with fixing holes for bolted lashing rings; first hole approx. 200 mm from the front, then at approx. every 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring each left and right on the rear taper of the gooseneck (LC 6,000 daN) * 2" king pin * Hydraulic cross member for supporting the gooseneck on the tractor unit or a dolly * Air connection with air gun at the gooseneck * 1 pair of steel ramps with climbing strips and securing pins to bridge the mountings of the low bed * 1 lashing ring each left and right on the front cross member (LC 10,000 daN) * Outer side beams of the loading area prepared for removable loading floor * Lashing rings with retaining spring at approx. every 1,200–1,300 mm on the inside carrier’s exterior of the loading area * Lashing rings with retaining spring at approx. every 1,200–1,300 mm on the outer carrier’s exterior of the loading area (LC 10,000 daN) * Cut-outs above the lashing rings in the outer carrier’s upper flange * Mechanical pin-tab coupling from low bed to rear chassis, for swapping the loading floor or installing extension beams, with electro-pneumatic-hydraulic couplings * The outer carriers of the low bed coated with anti-slip sand finish for slip resistance * 2nd ride height for high ride position, max. ± 50 mm from normal ride position, without installation of controls from the tractor unit * 1 pair lashing rings with retaining spring at the transition from the low bed to the excavator trough (LC 10,000 daN) * Front and rear tapers

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT23201013029, empty load weight: 7,340 kg, maximum load weight: 22,660 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space width: 2,540 mm, total length: 14,500 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, color: red, Year of construction: 2026, - Please note: archive photos! - Type SZS 300 spezial for truck transport #Chassis (low-loader semi-trailer) - Welded steel chassis, fifth-wheel coupling plate with replaceable 2" kingpin - Low-bed section from wheel area to gooseneck, inclined to approx. 210 mm loading height; rear sloped to wheel area - Hook-in rail for aluminium ramps at the rear, over the entire width - Wheel cover in galvanised sheet steel, removable - 1 towing eye at the rear, 10 t - Spare wheel with bracket on front bulkhead/external front tool box - 1 steel tool box on gooseneck, front transverse, approx. L=2400 mm, W=400 mm, H=600 mm, lockable - Electric cable winch, 24 V, pulling force 8165 kg, mounted front on gooseneck behind tool box on load bed, radio remote-controlled, cable length 35 m x approx. 10 mm, with roller cable guide window and 2 removable guide rollers on gooseneck and rear slope, incl. NATO socket on connection plate - 1 pair of wheel wells approx. 700 mm from gooseneck, recessed into floor, open to the outside. Note: main frame protrudes approx. 145 mm - 4 pairs of plug-in positions for wheel stops (Fliegl standard), without wheel stops - Spacer block for parking the semi-trailer, approx. 100 mm high and approx. 100 mm long Bjdpfx Aozy Hwyjl Aodh - 2 plug-in wheel stops - Preparation for spacer inserts in the wheel well #Lashing points (low-loader) - 2 pairs of 2.5 t lashing eyes on the gooseneck - 7 pairs of lashing mushrooms, recessed top and side in the outer frame, 10 t each - 4 pairs of 10 t lashing eyes recessed in the top of the main frame side members - 1 screw-type lashing eye, 6.7 t each (JDT), rear centre in the ramp storage compartment - 1 additional folding lashing eye at the front in the low-bed, 10 t each #Axle & suspension - SAF drum brake axle - Air suspension with lift and lower valve #Wheels and tyres - 235/75 R 17.5" - Steel wheels, twin-mounted, factory silver #Braking system - 2-line air braking system - Spring-loaded parking brake - 2 anti-mismatch coupling heads at the front, without connecting lines - EBS (electronic braking system) with EBS socket at the front, without connecting cable - Note: this trailer may only be towed by vehicles ensuring ABS effectiveness! #Electrics - 24 V multi-chamber LED lights with resistor, yellow LED side marker lights, LED number plate light - 2 white/red LED outline marker lights at the rear - 2 x 7-pin and 1 x 15-pin anti-mismatch sockets at the front, without connecting cable - 2 white LED front position lights - 1 LED beacon with bracket - 1 additional LED work light, at the rear - 2 additional LED work lights, integrated in the gooseneck to illuminate the load bed #Floor - Gooseneck with steel chequer plate covering - Low-loader deck in perforated steel sheet; chequer plate covering in the wheel well area, removable sheet covering in the wheel arch area - Rear slope with perforated steel sheet #Side boards - Aluminium, 320 mm high, on the sides of the gooseneck, plug-in, approx. 2500 mm long - Rear board, aluminium, 320 mm high, on the gooseneck, plug-in #Loading ramps - 1 pair of aluminium loading ramps, max. load capacity 12,000 kg per pair, length approx. 3400 mm and width approx. 320 mm, storage compartment between rear main frame side members #Registration / plates - Contour marking with reflective strips to ECE R 048, white on the sides and red at the rear - With DEKRA inspection and report - Warning board to ECE-70

Condition: used, empty load weight: 3,530 kg, maximum load weight: 10,870 kg, overall weight: 14,400 kg, axle configuration: 2 axles, first registration: 10/2025, next inspection (TÜV): 10/2026, loading space length: 7,200 mm, loading space width: 2,480 mm, suspension: steel, tire size: 205/65R17,5 129/127J, color: other, gearing type: other, front tire size: 205/65R17,5 129/127J, rear tire size: 205/65R17,5 129/127J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Like new, twin tires, lashing eyes. -- Subject to printing errors, mistakes and modifications, sample images --. More data available at: !, More details: ! Bedpfsz H It Hjx Al Aodh

Condition: used, maximum load weight: 29,380 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 05/2024, next inspection (TÜV): 03/2027, total length: 13,680 mm, total width: 2,550 mm, total height: 3,570 mm, Equipment: ABS, Kässbohrer tele low-loader with hydraulic gooseneck TECHNICAL DATA: * Saddle height: 1,250 mm * Rear swing door: 2,300 mm * Overall length: 13,190 mm * Gooseneck length: 3,950 mm * Platform length: 9,240 mm * Platform extension: 4,500 mm * Locking position: 500 mm * Platform height: 875 mm * Wheelbase: 8,100 mm * Axle spacing: 1,360 mm * 3 x BPW axles with drum brakes * Axle load: 30,000 kg * Load capacity per axle: 10,000 kg * Kingpin load capacity: 18,000 kg * Tare weight: approx. 12,627 kg (±3%) * Overall width: 2,550 mm + 600 mm side extensions * Sliding platform not included * Permissible total weight: 52,800 kg (60 km/h) * Permissible total weight: 48,000 kg (80 km/h) CHASSIS: * 2 rigid axles at the front * 1 trailing axle at the rear * WABCO braking system * Tires: 245/70 R17.5 * Spare wheel holder on the front panel * Air suspension * Load indicator for axle load * NATO socket Bdsdpfx Alszrq Dbe Aeh FRAME: * S700 MC steel * Gooseneck with 90° vertical corners * JOST support legs at the front * Foldable supports at the rear RAMPS: * Hydraulic gooseneck * 2 hydraulic ramps * Galvanized steel surface * Ramp length: 4,200 mm * Ramp width: 850 mm * Ramp angle: 9° * Load capacity: 40,000 kg * Height in closed position: 3,510 mm CARGO SECUREMENT: * 14 x 2 lashing points at 5 t * 7 x 2 lashing points at 10 t * 6 x 2 lashing points at 8 t * 8 x 2 stake pockets (52 × 102 mm) * Container locks for 20- and 30-foot containers * Side walls on the gooseneck ACCESSORIES: * Rotating beacon * Work lights * 2 sets of over-width signs with LED lighting * Rotating beacon connector * Storage box under the platform PAINTING: * Chassis in RAL 3020 traffic red We are happy to provide you with further information.

Condition: new, maximum load weight: 35,240 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 13,200 mm, total length: 13,200 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer K.SLH S HS 3 / 3H – 18 / 30 Low-bed trailer / 3-axle / hydraulically steered Immediately available, also available with a grating floor. Manufacturer: Kässbohrer * Type: K.SLH S HS 3 / 3H – 18 / 30 * 3-axle low-bed trailer * BPW axles * Air suspension * Drum brakes * 1st, 2nd, and 3rd axles hydraulically steered * Axle liftable * Manual lift axle control * WABCO EBS 2S/2M with ABS and RSS * Tires: 245/70 R17.5 * M+S / 3PMSF tires * Tire pressure monitoring system * WABCO SmartBoard * Electric motor pump for steering * Semi-automatic tracking of the hydraulically steered axles Dimensions / Weights: Overall length: 13,250 mm * Overall width: 2,550 mm * Fifth wheel height: 1,250 mm * Gooseneck length: 3,900 mm * Platform length: 9,300 mm * Platform height: 875 mm * Wheelbase: 8,800 mm * Axle distance: 1,360 mm * Tare weight: approx. 12,760 kg * Technical axle load: 30,000 kg * Fifth wheel load: 18,000 kg * Technical total weight at 80 km/h: 48,000 kg * Technical total weight at 40 km/h: 51,000 kg Wiese Transporttechnick - Dealer Chassis / Loading platform: High-strength S700 MC steel * 45 mm hardwood floor * Steel floor with drop structure over the wheels * Lateral widening * Widening up to 300 mm * 2" kingpin * Mechanical rear supports, load capacity 45 t * Partially metallized chassis * Rear end tapered by 500 mm / 10° Wiese Transporttechnick - Dealer Ramps: Hydraulic, folding ramps * Ramp load capacity: 40 t * Ramp length: 2,750 mm * Ramp width: 850 mm * Hydraulically adjustable Bsdpsz Ec Trjfx Al Aodh * Hardwood surface * Hydraulic gooseneck ramps * Ramp securing via chain tensioners Wiese Transporttechnick - Dealer Load securing / Equipment: Tie-down points: 10 × 10 t / 12 × 8 t / 22 × 5 t * 16 lashing pockets 80 × 80 mm * 4 container locking pockets for 1 × 20 ft * Tool box on the gooseneck, approx. 2,540 × 600 × 460 mm * Central lubrication system * LED rotating beacon * 2 work lights at the rear * Extendable warning boards with LED position lights * Storage box for widening planks * Chassis color: RAL 3020 Traffic Red Other: LED lighting * Aspöck EUROPOINT 3 LED * Spare wheel holder * 12 rims/tires * Widening panels * Extensive heavy-duty / construction machinery equipment Errors, changes and prior sale are subject to change.

Condition: used, empty load weight: 3,500 kg, maximum load weight: 7,000 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 08/2019, loading space length: 6,200 mm, loading space width: 2,480 mm, suspension: air, tire size: 235/75R17,5 141/---J, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 235/75R17,5 141/---J, rear tire size: 235/75R17,5 141/---J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Side panels, galvanized; lashing eyes; 2-part ramps. New price was €32,000. Subject to printing errors, errors and changes. Sample images. More details: ! Bdsdpfxjz H T Uce Al Ajh

Condition: new, overall weight: 31,000 kg, loading space length: 13,600 mm, loading space width: 2,480 mm, loading space height: 3,300 mm, Year of construction: 2026, Equipment: ABS, 2-axle inclined semi-trailer in special design with loading ramp for machine and forklift transport. Mega design with a coupling height of approx. 960 mm. Tapered construction for maximum internal height. Bodpfx Aox Hb Rdsl Asdh Dimensions: Length: 13,600 mm Width: 2,480 mm Height, tapered from rear to front: approx. 3,300 mm to 2,800 mm Wheel recesses including fill-in pieces VSE Smart Steering axle (steers forwards and backwards) Aluminum floor for extreme wheel loads, including anti-slip coating Alcoa DB alloy wheels on the outside Curtainsider body with lifting roof RSAB IceProtect Rear extendable Oversize warning plates Rear ramp in extendable version for minimum approach angle, including angle reduction Electro-hydraulic drive Comprehensive load securing equipment Upon request, we also supply the appropriate 3-axle tractor unit for purchase or rent. Further information available on request.

Condition: used, empty load weight: 7,180 kg, maximum load weight: 23,820 kg, overall weight: 31,000 kg, axle configuration: 3 axles, first registration: 07/2025, loading space length: 7,500 mm, loading space width: 2,550 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Chassis: Hot-dip galvanized, 70 mm thick wooden floor, 18 lashing points, 12 pocket slots, 2 ramps, each 3,110 mm long x 760 mm wide, climbing strip on the outside of the ramps and rear slope, hydraulic one-piece ramps, loading height: 880 mm, technically capable of a total weight of 31 tons, incl. axle load indicators, last axle as a steering axle, warning signs + lighting and rotating beacon, widening to 3 m with wooden supports. Also available with a K80 tow hitch! -- Subject to printing errors, mistakes and changes, sample images -- More data available at: More Details: ! Bjdpfx Asz H Itgol Ajdh

Condition: used, empty load weight: 3,450 kg, maximum load weight: 7,050 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 08/2021, next inspection (TÜV): 11/2026, loading space length: 6,200 mm, loading space width: 2,460 mm, suspension: steel, tire size: 235/75 R17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 235/75 R17,5, rear tire size: 235/75 R17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Steel floor, hydraulic ramps, lashing rings, -- Printing errors, mistakes and changes reserved, sample images --, More data at: !, More Details: ! Bdodpfx Alsz H T S Uj Aeh

Condition: used, empty load weight: 4,170 kg, maximum load weight: 14,830 kg, overall weight: 19,000 kg, axle configuration: 2 axles, first registration: 05/2013, suspension: other, tire size: 245/70R17,5 137J, color: other, gearing type: other, front tire size: 245/70R17,5 137J, rear tire size: 245/70R17,5 137J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Lashing eyes, , --  Misprints, errors and changes reserved, Sample images --, More details at: !, More details: ! Bdedpfx Aez H Iukjl Aeh

Condition: used, maximum load weight: 27,300 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 04/2013, next inspection (TÜV): 08/2026, loading space length: 11,700 mm, loading space width: 3,000 mm, total width: 2,550 mm, total height: 3,700 mm, Equipment: ABS, * Gooseneck with storage boxes * Trailing axles * Hydraulic loading ramps Bodpoz A N Anofx Al Aodh * Low-bed, extendable ----* Tire dimension: 235/75R17.5 * Technical total weight: 42,000 kg * Tare weight: 8,700 kg * Overall length: 13,150 mm * Next inspection due: 02/2027 ----Vehicle number: 12148----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.-----We are happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional fee:----Trade-in of your old vehicle, TÜV/inspection approval, complete export processing, assistance with financing, application for export license plates, vehicle transport, vehicle registration, recovery and vehicle transport services. ----?YOUR VTS TEAM