Used Palamides Stacking Delivery for sale (20,772)

Condition: ready for operation (used), Presser bander stacker delivery Gujdpfxjq Tfacj An Isg

Condition: ready for operation (used), Size with pallet feeder max 660 x 1040 mm Speed max 210 m/min Equipment • pallet feeder with Tremat suction head 1st folding unit: • 4 buckle plates Gsdpfxjd Iq S Re An Ieug • noise prevention peripheral units and deliveries • marking device MKE 66 • upright stack delivery with pressing SBP 66

Year of construction: 2010, condition: used, Case maker Kolbus DA 270 Year: 2010 For fully automatic production of book cases, files, display cards, calendar backs or game boards. Gedjx Ary Espfx An Ieug Description: - Automatic setting - Motorised setting - Automatic case counter - Board pre stacking conveyor: 1700 mm - Board cutter: PS - Centre strip infeed (flexible) - Waste chopper - Cloth feeder: Non-Stop - Glue unit - Preheated glue tube - Viscosity control - Device for inside lining with hotmelt - Device for producing padded cases - Pressing station - Stacking delivery Max. mechanical speed: up to 65 cycles/min Size range opened case (max): 670 x 390 mm Size range opened case (min): 205 x 140 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: like new (used), Year of construction: 2024, operating hours: 260 h, functionality: fully functional, cutting width (max.): 530 mm, cutting length (max.): 750 mm, total width: 2,000 mm, input current: 32 A, total height: 2,400 mm, working width: 510 mm, total length: 6,100 mm, input voltage: 400 V, space requirement height: 3,000 mm, space requirement length: 7,500 mm, space requirement width: 2,500 mm, Equipment: documentation/manual, MOTIONCUTTER® 530 – Fully Loaded 450W Digital Laser Finishing System Installed December 2024 | Only 260 Operating Hours | As-New Condition Available immediately in the UK. This is a fully equipped MOTIONCUTTER® 530 high-speed digital laser system with Automation Suite, Position Sensor, Waste Separation and Shingling Belt — essentially the complete production configuration originally supplied fully installed and trained at approx. €317,000 Installed December 2024. Only 260 total operating hours since new. This machine is barely run-in. What You’re Getting Core Machine 450W CO₂ sealed-off laser (600W guaranteed output) 510 x 510 mm working area Up to 18,000 mm/s deflection speed ±0.2 mm dynamic tolerance 20,000 hour expected laser lifetime Mistral 530 pile feeder 80–500 gsm Sheet size up to 530 x 750 mm (extendable to 1000 mm) Conveyor System Patented metal mesh belt 0–45 m/min speed Integrated cleaning station Fully Loaded Options Included ✅ Automation Suite Barcode job recognition Automated job handling Workflow XML integration 100% production control on every sheet ✅ Position Sensor On-the-fly X/Y correction to printed mark Critical for precision packaging alignment ✅ Manual Waste Separation Mechanical stripping of finished product from waste ✅ Shingling Belt High-capacity delivery system Guedpfx Aneyk Ip To Isg Software-controlled separation of jobs This is the configuration serious packaging converters buy. Capabilities Cut | Filigree Cut | Kiss Cut Crease | Micro Perforate | Engrave Variable Data Finishing NAMECUT® Personalisation from CSV All in one pass. No tooling. No dies. Ideal For Folding carton short runs Cartonboard packaging Personalised packaging Luxury packaging prototypes High-value sheet finishing Indigo / sheet-fed digital press finishing If you’re currently outsourcing die-cutting for short runs, this replaces that dependency overnight. Condition Installed December 2024 Only 260 hours total runtime Clean production environment Fully operational Available for inspection & test runs in the UK Reason for sale: strategic production shift. Why This Is Attractive Skip 8–10 week factory lead time Skip installation delays Skip international shipping Get a fully proven, calibrated machine Save significant capital vs buying new Serious enquiries only. Available immediately.

Condition: good (used), Included in delivery are: 28x stacking transport box, used Manufacturer: SSI Schäfer type: 14/6-4 design: recessed grip on both sides color: blue material: polypropylene Outer dimensions LxWxH: 210x150x123mm inner dimensions LxW: 190x123mm Useful height in stack: 110 mm Capacity: 2,50 Liter Stackable: yes Weight | Piece: 0,266 kg Remark: These are used stacking transport boxes. There may be scratches, soiling and color defects may be present. Application: The stacking transport boxes are suitable for storing tools, screw materials and other small parts. small parts. General information about the article: Guodpfspl Tdnjx An Isg This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), The scope of delivery includes: 56x stacking transport box, used Manufacturer: SSI Schäfer type: 14/6-4 design: recessed grip on both sides color: blue material: polypropylene Outer dimensions LxWxH: 210x150x123mm Guodpfx Anspl T Udj Ieg inner dimensions LxW: 190x123mm Useful height in stack: 110 mm Capacity: 2,50 Liter Stackable: yes Weight | Piece: 0,266 kg Weight | Package: approx. 17,00 kg Remark: These are used stacking transport boxes. There can be scratches, soiling and color defects may be present. Field of application: The stacking transport boxes are suitable for storing tools, screw materials and other small parts. small parts. General information about shipping the item: - The goods are shipped free of charge throughout Germany - The island transport is excluded

Condition: used, The equipment in question is a vertical stack delivery system with an integrated pressing station, manufactured by Lega. This specific model is identified as type 30/55 and bears the serial number 32323. Currently, the equipment is in stock and located in Germany. It is reported to be in good condition, making it ready for immediate use or integration into existing operations. Format: Gjdpfxswzxzcj An Ijug Equipment: Vertical stack delivery with pressing station Good condition

Condition: used, Year of construction: 2021, functionality: fully functional, Dürr Ecopure VAR 2206 Thermal Oxidizer with Flue Gas Cleaning (2021) For burning liquid and gaseous waste streams including fluorinated gases, e.g. PFAS, and recovery of aqueous hydrogen fluoride Emissions limits SO2 ≤ 100 mg/Nm³ NOX ≤ 30 mg/Nm³ CO ≤ 50 mg/Nm³ CF4 ≤ 70 mg/Nm³ HF ≤ 1 mg/Nm³ NH3 ≤ 2 mg/Nm³ Comprising Direct fired thermal oxidizer Hot gas cooling and acid recovery Alkaline wet scrubber Honeycomb selective catalytic reduction deNOx system >1M cost spare parts Direct fired thermal oxidizer Including 2x natural gas combustion chambers and burners - High calorific liquid waste requires safe ignition supplemental hydrogen supply for acid formation - Gaseous waste streams injected via nozzles downstream and close to the burner - 1.5MW multi-fuel natural gas & liquid waste (minor fuel stream) burner with natural gas capacity up to 200Nm3/h - 1400C normal, 1540C max allowable temperature destruction of pollutants to reduce emissions with 3.28 MW thermal energy transfer - 2 seconds minimum residence time in combustion chamber at 1400C - 1,800mm combustion chamber internal dia. - Approx 300mm refractory lining - 2,400mm combustion chamber external dia. - 12,000mm combustion chamber internal length - 3.28MW maximum thermal capacity - 4,900Nm3/h, 60mbar, 14kW combustion air fans One chamber is active, the other one is on standby and can be prepared, repaired, or maintained. This allows minimizing shutdown and changeover time to only several days Gusdpfxsz Ai Tps An Iog Wet scrubber hot gas cooling and acid recovery SGL Carbon Diabon HT-PQ 850 graphite pipe quencher - 6,000 Nm3/h capacity flow - 1,100 mm dia. - 2,000mm high - pumps SGL Carbon Diabon THX-RS falling film absorber shell & tube heat exchanger - 1,100mm dia. - 4,500mm tube length - 595 no. tubes - 22mm tube internal dia. - Graphite, carbon steel - pumps Quench vessel - PP/FRP - 1,100mm dia. - Approx. 6,000mm high 2x Scrubber absorber columns, each - Shell FRP/PP - Internals PP - 1,000mm dia. - 11,000mm high - Pumps - Dosing station FRP 5m3 Emergency water tank - 1,600mm dia. - 3,000mm high - 3kW heating 2x Teblick 100,000L HDPE hydrofluoric acid tanks (2019) Honeycomb selective catalytic reduction deNOx system - 5,900Nm3/h, 130mbar, 42kW induced draft fan - 320 kW gas/gas heat exchanger - 500 kW capacity reheat burner - 1.2m deNOx honeycomb catalyst Clean gas outflow Stack with flow & temperature measurement Spare parts include - 200 items of sensors, pumps, valves, gaskets, joints etc. - Graphite quencher - Falling film absorber With the redesign and maintenance support of Dürr, the system could also - be adapted to other halogenated gases with bricks to be selected according to gas application - cope with the presence of VOCs or contaminated air - larger volumes with the addition of a small lance for 15kg/h liquid injection

Condition: good (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, total length: 1,350 mm, total width: 930 mm, total height: 2,270 mm, DGUV certified until: 07/2027, Equipment: CE marking, documentation/manual, Stacking oven, electric oven Wiesheu EBO 4-86 M Individually adjustable bottom and top heat Guodpfxjxxgnvs An Ieg 4 baking levels, each 1 x 600 x 800 mm Oven is mobile Exhaust hood on top with fume condenser Modular system Base frame at the bottom with sheet metal shelf Connection: 400V, 16A-CEE plug Dimensions: 930 x 1350 x 2270 mm, W x D x H Used oven Optional: Water filter Baking trays Delivery service We have many more ovens in stock!

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: Mini 76 TH, type of input current: AC, input voltage: 400 V, working width: 760 mm, AUTOBOND MINI 76 TH automatic laminator. 2015 Model. Fully refurbished. Max sheet size: 76 x 105cm Min sheet size: SRA4. Speed: 60 m/min. 22 million impressions. Heidelberg Feeder. Gedozpw Izepfx An Ieug Tool temp YCU. Jogger delivery. Optional post heat system.

Condition: excellent (used), Year of construction: 2010, fuel type: diesel, Linde H20D-01 diesel forklift Year of manufacture: 2010 According to the hour meter: 9,688 hours 2-ton lifting capacity 2.44-meter stacking height 5.57-meter lifting height 26 kW VW engine Gusdpfx Anekl D Ays Ieg - Triple mast - Side shifter - Full cabin - Lighting system - Visually in NEW condition!! - Tires in good condition!! - Immediately ready for use!! Selling price: €15,950 net Affordable delivery options also available!!

Condition: used, Year of construction: 2007, Folding machine MBO Navigator T 800/442 Year: 2007 Description: - 16 page folder Feeder - Round pile feeder - Dualfeed - Pump Buckle folding unit: 1 MBO T800.1-1-78/4 - First buckle folding section with 4 buckle plates - Maximum infeed width: 78 cm - Perforating shaft Gsdpfexd Dmyjx An Ijug - Anti noise hood(s) Buckle folding unit: 2 MBO T800.1-2-68/4 - Second buckle folding section with 4 buckle plates - Maximum infeed width: 68 cm - Perforating shaft - Anti noise hood(s) Buckle folding unit: 3 MBO T800.1-3-56/2 - Third buckle folding section with 2 buckle plates - Maximum infeed width: 52 cm - Noise hoods for upper folding buckles Delivery MBO SBAP-46-ME - Horizontal stack delivery with pressing and marking device

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,200 kg, maximum load weight: 32,800 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 445/45 R19,5", tire condition: 100 %, color: original, Year of construction: 2026, Save on transport costs! Upon request, up to three curtainsider trailers can be delivered as a space-saving 3-unit stack. Roof and side curtains are supplied separately and can be easily installed after delivery. Benefit from significantly reduced transport costs. Customized transport solution Configure your Fliegl trailer according to your requirements. The shown vehicle is an example only. Production and equipment are customized according to customer specifications. #Chassis Gjdpfjzmub Hex An Ijug Fine-grain steel welded construction with "Preload" neck area reinforcement Fifth wheel plate with replaceable 2" kingpin Outer frame with Load-Lock profile for securing straps 24 t 2-speed landing gear, one-side operation Extendable rear ladder Aluminium side underrun protection Galvanized steel underrun protection Rear impact protection Lockable plastic toolbox, W=600 / H=425 / D=460 mm Storage box for fire extinguisher up to 6 kg #Axles + Suspension Disc brake axles Laser-measured axle and chassis alignment for reduced tyre wear and fuel consumption Air suspension 1st axle automatic lift axle with forced lowering and starting aid (activated by 3x brake operation) #Brake system Dual-line compressed air braking system Colour-coded brake lines for easy service Spring-loaded parking brake 2 non-interchangeable coupling heads at front, without connecting lines EBS electronic braking system with EBS socket at front Raise/lower valve Vehicle height increases by approx. 50 mm when lift axle is raised Vehicle driving stability system #Wheels and tyres 445/45 R19.5" steel rims, factory silver finish #Electrical system 24 V system, multi-chamber lights Yellow LED side marker lights White front position lights White/red rear lane marker lights 2 x 7-pin non-interchangeable sockets at front #Floor Approx. 30 mm phenolic plywood floor panels on longitudinal supports High point load capacity for forklift axle loads up to max. 7,100 kg Rear steel chequer plate flooring approx. 300 mm length #Front wall / Corner posts Height 2,580 mm Steel corner posts in high-volume design Side curtain release system at front wall "Crash Blocker" steel impact protection inside lower area (approx. 140 mm height) Front wall additionally covered inside with 1,250 mm high phenolic plywood panel #Centre posts 3 pairs of sliding posts, movable over full length With 4-fold insertion pockets and long lower pocket 3 post positions 4 rows of aluminium V-insertion slats #Rear wall / Corner posts Steel rear corner posts up to roof height Curtain attachment with round tube and tension ratchet Double-wing rear portal doors with 2 internal rotary bar locks each #Curtain Curtain with welded horizontal and vertical reinforcement belts Stainless steel tension buckles #Roof Sliding roof system with rear end lift function Roof opens from rear to front L-shaped roof beam for automotive industry applications Non-elastic roof with minimal deflection during loading and unloading Optimized rain gutter at rear, mounted on top rear cross member above doors EcoLift roof lifting system, height adjustable by approx. 380 mm on both sides with gas spring assistance Complete body supplied loose as a kit (unassembled).

Condition: good (used), Year of construction: 2006, Built in 2006 Size max 670x390 mm min 205x140 mm Speed 3.900 c/h Godpfx Ajzlbdron Ieug Description: - with round corner device - Automatic setting - Motorised setting - Automatic case counter - Board pre stacking conveyor - Board cutter: PS - Centre strip infeed (flexible) - Waste chopper - Cloth feeder: Non-Stop - Glue unit - Preheated glue tube - Viscosity control - Device for producing padded cases - Pressing station - Stacking delivery

Condition: used, Year of construction: 2007, The Heidelberg Stahlfolder TH 82/6-4-2 - RFH, manufactured in 2007, is a high-quality folding machine with a size of 820 mm. Currently dismantled and located in Germany, this machine features a rotary feeder RFH-82. It includes three stations: the first station has 6 folding pockets of 82 cm with automatic pocket setting, the second station has 4 folding pockets of 66 cm with automatic pocket setting, and the third station has 2 folding pockets of 56 cm with automatic pocket setting. The machine also includes a stacking delivery SBP 66, a touchscreen monitor, and an MCT control system. The specific model is identified as TH82/6/4/2 with the machine number FH.HACO-00951. Format: 820 mm Equipment: Rotary feeder RFH-82 1.station: 6 folding pockets 82 cm Automatic pocket setting 2.station: 4 folding pockets 66 cm automatic pocket setting 3.station: 2 folding pockets 56 cm Automatic pocket setting Guodewnft Sspfx An Isg Stacking delivery SBP-46+ MKE+VE Touchscreen-Monitor, MCT-control-system

Condition: used, Year of construction: 1997, No. 3214 Feed-through veneer press Sergiani LAS Plus Used, year of construction 1997, already dismantled and stored Automatic press with continuous operation for the production of barrier doors, finished doors (veneer doors, HPL, CPL) and pre-treated parquet (2 - 3 layers). The press can be used to load the workpieces one after the other, while the pressure in the other compartments is kept constant. Up to 2 employees are required to operate the line. The multi-daylight press enables a very high production output. The pressing time is approx. 3 minutes (180 seconds) and is spread over 10 levels, which means that the press opens every 18 seconds and a new panel is processed. The press has already been dismantled and stored. The system was in operation until it was dismantled. The previous owner produced 3-layer parquet with the system. The bottom layer was inserted manually. The middle layer consists of one piece. This was glued at the top and bottom and automatically inserted into the system. The top layer was also inserted automatically. Glue spreader / glue applicator not included (optionally available) Stages: 10 Pressing force: approx. 5.5 kg/cm² Total force: 200 tons Panel size: approx. 2500 x 1300 mm LW Heating: Hot water Area of application: Production of doors, laminating, veneer and wood-based material processing High productivity with a capacity of up to 1200 doors per shift (factory specification) Vacuum loading system with 2-lane infeed roller conveyor, without gluing Scissor lift table with loading belt (belt approx. 2900 x 1000 mm LW) Vacuum stacking station with outfeed roller conveyor Space requirement for press with loading table approx. 6500 x 2365 mm LW Space requirement for entire production line approx. 25000 x 5710 mm LW Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without transportation and assembly Loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Gujdpfx Ansv Sthgo Iog Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Criss Cross Delivery, used, by Stielow Godpfx Aexrz Nuen Ioug This Criss Cross delivery system is used in booklet production. It arranges book blocks in an alternating offset pattern, making it easier to separate and visually inspect the booklets. This arrangement promotes efficient post-processing and improves stack stability. Although this model is older, the principle of Criss Cross delivery remains relevant in modern booklet production.

Condition: ready for operation (used), Counter Stackers Palamides Alpha 800 -2003 Guedpfx Aeir A Nyjn Iog

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, very few operating hours very good condition Consisting of: Quickbinder adhesive binding machine with PUR with remote diagnostics with cooling and drying section with three-knife trimming system DGR D09 with compressor Base machine for solo or inline operation for connection with a three-knife trimmer Equipment - rotary feeder, integrated vacuum technology Winjector R - scoring station with split scoring tools for 2 and 4 grooves - feeder and pressing station including 1 set of standard pressing strips - ejector lift with gripper system for lightweight products - stack delivery (standing delivery) - industrial PC with TFT color display and touch screen function - graphical user interface Navigator E - motorized thickness adjustment * PUR spine gluing unit, mobile - Europe for the production of an adhesive-bound brochure with 1 application roller with heated spinner with automatic doctor blade control with specially coated glue tank with integrated PUR bulk melting system * Cooling and drying section Gujdpfx Aeimqucon Ijg * Hotmelt side gluing unit, mounted on the spine gluing unit * Three-knife trimmer D09 – System DGR Base machine for three-side trimming of adhesive-bound products in offline and inline operation - Offline or inline operation possible * Compressor system 1800 dm³/min.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1024, Size min L 90 x W 75mm, max L 330 x W 160mm, maximum pile height: 150 mm, Max 1200 piles per hour Gusdpfx Anovmxtwe Iog Machine no: 1024

Condition: good (used), Year of construction: 2016, operating hours: 12,485 h, load capacity: 1,400 kg, lifting height: 4,716 mm, mast type: triplex, construction height: 2,065 mm, empty load weight: 1,600 kg, mileage: 12,485 km, Electric three-way reach truck Brand: Still Year of manufacture: 2016 Capacity: 1,400 kg Lifting height: 4,716 mm Mast height (lowered): 2,065 mm Hours: 12,485 hours Free lift Battery with charger Automatic filling system Gjdpfoz Ailfjx An Ieug Video to follow

Condition: ready for operation (used), Year of construction: 1980, Herzog Heymann small folding machine KL112, year of manufacture 1980/1985 Schuppen feeder 176 1st station KL112 with 6 pockets 2nd station KL112 with 4 pockets Gjdpjvyapyjfx An Ieug Vertical stack delivery 177

Condition: used, Year of construction: 2000, The Mueller Martini Bravo saddle stitcher, manufactured in 2000 with the serial number MMZO 279 108, is a robust and versatile machine designed for efficient booklet production. With a mechanical speed of 11,000 cycles per hour and a runtime of 29,250 hours, it ensures high productivity and reliability. This machine has been dismantled and is located in Germany. Equipped with 7 vertical feeders (370 mm) and 1 cover feeder (1529 mm), it allows for flexible and efficient paper handling. The stitching unit features 2 stitching heads, ensuring secure and precise binding of booklets. The integrated 360-type three knife trimmer provides clean and accurate cutting of the finished product. The delivery system includes a Stacker OMG Cucciolo, manufactured in 2005, for organized and efficient stacking of the completed booklets. Optional equipment available on request includes a center-cut device, trio-cut device, punching device, additional stitching heads, and compressors. This machine is well-suited for businesses looking to enhance their booklet production capabilities with a reliable and proven saddle stitcher. Format: 480 x 320 mm Equipment: Feeder Number of vertical feeder: 7 x 370 Cover feeder: 1x 1529 Stitching unit Type: Bravo 2x stitching heads Three knife trimmer Type: 360 Delivery Type: Stacker OMG Cucciolo Year: 2005 Optional (available on request) Guedjwcqx Nopfx An Iog Center-cut device Trio-cut device Punching device Additional stitching heads Compressors Technical Details Mechanical Speed: 11,000 cycles/h Runtime 29.250 h

Condition: used, Year of construction: 2021, Painting system for edge surfaces Manufacturer: WIKOMA Painting of narrow edge surfaces Commissioned: 2021 Intended use: Spraying the edges of furniture panels arranged in stacks. Scope of delivery: - 2 spray booths - 2 hot air drying tunnels - 1 sanding booth Godpfx Anjzuztxj Ijug - Chain conveyor - Control cabinet The system was in operation until the end of June 2025. Note: The technical data and descriptions are a transcript of the order confirmation from that time. The data is for informational purposes only and is not binding.

Condition: good (used), Technical specifications for the shelf rack: Rack system: SSI Schäfer Type: R 3000 Technical data for assembly: Number of rack rows: 01 unit Rack length: 3,290 mm Number of bays per rack row: 02 units Scope of delivery includes: 03x shelf rack uprights, used Finish: sendzimir galvanized Design: slotted Adjustment pitch: 26.5 | 26.5 mm Frame profile dimensions: 31x60x0.88 mm Weight / unit: approx. 8.92 kg Including cross brace and base plates (uprights are pre-assembled) 2,490 mm high 600 mm deep 12x shelves, used Finish: sendzimir galvanized For upright depth: approx. 600 mm Total width: approx. 1,600 mm Total depth: approx. 594 mm Height: approx. 30 mm Weight / unit: approx. 8.12 kg Max. load per shelf 75 kg, with uniformly distributed load. 48x shelf supports, used Suitable for smooth uprights Finish: sendzimir galvanized 02x cross braces, used Model designation: KV31313 Weight / unit: approx. 0.405 kg / unit Finish: sendzimir galvanized 12x collapsible folding boxes, used Color: grey External dimensions LxWxH: 600x400x400 mm Internal dimensions LxWxH: 555x355x385 mm Height when folded: 85 mm Stacked height: 75 mm Handles, front side: open Handles, long side: closed Weight: 3.41 kg / unit Water drainage holes are present in the base of the box! 01x load capacity sign Indicating bay and shelf loads, manufacturer and commission number Dimensions: 297 x 210 x 2 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any desired transport or shipment of this item is subject to additional costs, which can be provided separately depending on the delivery location and scope. Please inquire with us for further details. Gusdpfx Aoy D Hh Non Iog