Used Pneumatic Staple Gun for sale (9,022)

Condition: used, mileage: 1,682 km, power: 153 kW (208.02 HP), first registration: 11/2025, overall weight: 8,300 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, next inspection (TÜV): 11/2026, gearing type: mechanical, emission class: euro6, total length: 6,600 mm, total width: 2,550 mm, total height: 2,800 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis until conclusion of the sale, subject to errors, typographical errors, and prior sale: DAF XB 210 street sweeper with Brock superstructure (Chassis 20) First registration: 17.11.2025 1,682 km 58.33 operating hours Engine: 4,460 cc 152 kW / 210 hp Euro 6 Permissible total weight: 8,300 kg Unladen weight: 7,440 kg Payload: 890 kg Overall length: 6,600 mm x overall width: 2,550 mm x overall height: 2,800 mm Wheelbase: 3,150 mm, overhang: 1,730 mm Brock sweeping technology, type VS4 Manual gearbox, 6 gears + hydrostatic drive 110 L fuel tank, 20 L AdBlue tank Plus warranty up to 200,000 km / 3 years from first registration Daytime running lights Day cab with tinted windows Radio/CD 2 x electric windows, mirrors, mirror heating 2 x LED rotating beacons on the cab roof Rearview camera Central locking with remote control Luxury driver's seat, armrest on the passenger seat ECAS remote control, 10-year subscription for Paccar Connect from first registration DAF infotainment system with USB/Bluetooth ACC (adaptive cruise control) and FCW (forward collision warning) and AEBS-3 emergency braking assistance system, DPA (driver performance assistant), lane change warning system, VSC (electronic vehicle stability control) Rear axle SR5.13 (single-driven rear axle) Tires: 225/75R22.5 Good Year, approx. 90% remaining, with tire pressure monitoring Air suspension at the rear, leaf spring suspension at the front Exhaust brake Superstructure: Compact sweeper VS4 with hydrostatic drive HT 400 Hydrostatic drive OMSI HT 400 Dirt container: 4 m3, dirt container + water tank made of stainless steel, slide valve on the dirt container Shut-off valve opens during reverse driving Exhaust air distribution upwards, inspection flap on the right, wastewater drain valve 3" Iodpszx Iklsfx Afheig Sweeping unit on the right with a disc brush Roller brush 4 x rotating beacons in LED Pneumatic residual water disposal Camera system Waeco Dometic with 7" monitor and 3 cameras, Camera 1: rearview camera, Camera 2: sweeping unit on the left, Camera 3: sweeping unit on the right LED work lights for the weed brush Weed brush, adjustable left/right, with chain drive Sweeping unit on the left with a disc brush VS4 and LED work lights Disc brush can be extended and retracted continuously during sweeping, pivoting roller brush, hydr. inclination adjustment of the outer disc brush, washing kit 150 bar incl. hose reel, hand spray gun with lance, hose length 15 m Water bar on the ram with additional pump VS4 Leaf suction system VS4 on the container roof Fine adjustment valves for water in the cab VS4 Price: € 215,000.00 (net) All information without any guarantee or warranty. Our "General Terms and Conditions" apply. Place of jurisdiction for both parties for disputes up to € 10,000 is the local court of Ludwigslust; for disputes exceeding this amount, it is the regional court of Schwerin. Subject to errors, typographical errors, and prior sale.

Condition: excellent (used), Year of construction: 2021, Ref:11122 . 2021 & 2020 SIAT XL-461 Box Taping Machines. A pair of semi-automatic sealing machines with random adjustment. Meaning the machines are able to adjust themselves according to the different box dimensions. They apply automatically a 'C; strip of adhesive tape to the top & bottom of the box. Specification of each machine: Drive belt speed: 20m/min. 2 x motors kW 0.13 2 x K12R taping unit - 75 mm width Aluminium telescopic legs with millimetric guide Adjustable working height: 445 - 705 mm Locked stop emergency button On/Off magneto-thermic switch Adjustable descending height of the taping unit Iiedpfozmx Hyox Afhjg Top head pneumatic pressure regulators.

Year of construction: 2022, condition: used, Carsoe Group Anytray Buffer 1500 – Pneumatic Tray Buffer System Manufacturer: Carsoe Model: Anytray Buffer 1500 LLANONE Right Pneumatic Year of manufacture: 2022 Machine type: Tray buffer / product accumulation system Description The Carsoe Anytray Buffer 1500 is a pneumatic tray buffering system designed to temporarily accumulate and manage trays within automated food processing and packaging lines. The system helps stabilize product flow and prevents interruptions between processing machines. Built with hygienic stainless steel construction, the unit is suitable for demanding food production environments, especially in seafood and protein processing facilities. Technical Specifications - Manufacturer: Carsoe - Model: Anytray Buffer 1500 LLANONE Right Pneumatic - Year: 2022 - Power: 0.46 kW - Supply voltage: 230 VAC + N + PE - Frequency: 50 Hz - Air pressure: 6 bar - Max short-circuit current: 6 kA - SO-No.: FOD 220002 Isdpfeyt Hu Tox Afhoig - Part number: P09390 Key Features - Pneumatic tray buffering system - Designed for stable product flow in production lines - Hygienic stainless steel construction - Suitable for high-capacity food processing environments - Easy integration into automated tray handling systems Applications - Seafood processing lines - Ready meal tray production - Automated packaging lines - Food processing plants Condition Used .

Condition: like new (used), Year of construction: 2016, operating hours: 3,641 h, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 35 m/min, feed rate Y-axis: 35 m/min, feed rate Z-axis: 35 m/min, controller manufacturer: Heidenhain, controller model: TNC 640, workpiece weight (max.): 2,000 kg, table width: 700 mm, table length: 1,070 mm, table load: 2,000 kg, overall weight: 10,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 3,641 h, spindle motor power: 20,000 W, spindle nose: HSK-A63, number of spindles: 1, number of slots in tool magazine: 38, Equipment: documentation/manual, This HERMLE C400 is in like-new condition and has seen very little use, with only 3641 spindle hours. The machine comes from a repair/prototype workshop and was primarily used to machine plastics and aluminum. The machine is located in our showroom and can be inspected while running! Additional options & accessories: - Air through the spindle. - Heidenhain TS460 measuring probe. - Electronic handwheel. - Approx. 20 HSK-A63 tool holders (in the tool changer). - Manual cabinet roof. - Preparation for mist extraction system. - Coolant gun. Iijdpfx Afjzyq Ebjhsg - Original HERMLE + Heidenhain documentation. Weight & dimensions: approx. 10,000 kg

Condition: new, Year of construction: 2021, functionality: fully functional, In-stock machine "NEW" - available for immediate delivery! (Subject to prior sale) Control system: Fanuc 0i-MF Plus, 10.4" with Manual Guide i & 2 MB NC memory Isdpjifn N Nsfx Afheig LOOK-AHEAD function, 400 blocks Machine table: Table size: 950 x 550 mm Load capacity: 800 kg Width of T-slots: 18 mm Number of T-slots: 3 Distance between T-slots: 150 mm Travel ranges: Travel distances X/Y/Z: 860/550/550 mm Spindle nose to table surface: 150 - 700 mm Linear guides & speeds: Ball guides in X/Y-axis Roller guides in Z-axis Rapid traverse X/Y/Z: 40/40/30 m/min Feed rate during milling: 0 – 10,000 mm/min Smallest increment: 0.001 mm Tool magazine (CAM-type) / changer: Number of magazine positions: 30 System: random access Max. tool diameter: Ø 75 mm Max. tool diameter with free adjacent slots: Ø150 mm (40 tools: Ø130 mm) Max. tool length: 300 mm Max. tool weight: 7 kg Spindle: Spindle taper: SK-40 Drive power (30min/cont.): 18.5/11 kW 15,000 rpm direct spindle drive Spindle oil cooler Coolant, chip, and compressed air management: Coolant system incl. 300 liter tank and pumps External coolant around the spindle Chip conveyors on the right and left in the machine bed Compressed air nozzle on the spindle (M32/M33) Compressed air through the spindle (M38/M39) Compressed air and coolant gun Other: Swiveling control panel Electronic handwheel (wired) Centralized lubrication oil / air Full enclosure Work light Heat exchanger on the control cabinet Auto-Power OFF function Hand tool set Signal light Transformer 400 VAC, 50 Hz CE declaration of conformity according to European directives Electrical and pneumatic requirements: Electrical connection: 36 kVA Required pneumatic inlet pressure: 6 bar Dimensions: Machine size: W2,260 x D2,900 x H2,775 mm Required footprint: W3,160 x D3,000 x H3,000 mm (including chip conveyor, discharge to the left) Machine weight: approx. 5,400 kg (net) Existing special equipment: Spindle: - Direct drive spindle SK-40, 15,000 min-1 - Drive power (30min/cont.): 18.5 / 15 kW, (FANUC motor) Tool magazine / changer: - Tool drum magazine with 30 positions, DIN69871, SK-40 Rotary or additional axes: - Preparation for 4th axis (FANUC control), incl. wiring and Harting connector without axis drive Coolant, chip, and compressed air management: - Bed flushing - IKZ coolant pump with 20 bar pressure, for direct-drive spindles - incl. cartridge filter - Belt-type chip conveyor incl. chip cart (chip removal to the front, left side of the machine) Measuring and monitoring systems: - RENISHAW OMP-60 measuring probe with infrared transmission system for workpiece measurement, incl. probe holder, repeatability: 1μm - RENISHAW NC4+ tool laser measuring system and tool breakage monitoring in the machine, incl. holder - Auto-Door (side door) - Pneumatic interface for workpiece clamping - Clamping devices as shown in the picture with RoboJob Mill Assist 25kg (year of manufacture 2025 - NEW) - Full enclosure - Dual gripper available immediately

Condition: excellent (used), Year of construction: 2016, S016277 PROD. ALUP TYPE ALLEGRO26 CE S/N CAI907698 YEAR 2016 POWER (kW) 26 CAPACITY (m3/min) 0.77-4.73 at 7 bar PRESSURE (bar) 7-13 HOURS (RUNNING/TOTAL) Isdpfx Asz A Tk Aefhsig INVERTER yes BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air CONNECTION 1" NEW/USED used DOCUMENTATION no

Condition: excellent (used), S016792 Iiedpfx Asz Dhaujfhjg PROD. KÄSER TYPE ASD57 S/N 1382 YEAR 2006 POWER (kW) 30 CAPACITY (m3/min) 4.5 PRESSURE (bar) 8 HOURS (RUNNING/TOTAL) 75176/96563 FREQUENCY CONVERTER no BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air TANK-MOUNTED no DOCUMENTS no CONNECTION 1 1/2 NEW/USED USED

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, type of input current: AC, input voltage: 400 V, year of last overhaul: 2025, input frequency: 50 Hz, Equipment: documentation/manual, Manufactured by Eurostar Italy - one of the leading filling manufacturers Iiedpfx Asx A U Urjfhsg Designed for filling Apple Cider, Beer, CSD and still drinks Triblock -rinser - filler - capper 2,000 BPH at 500ml bottles 3,000 BPH at 330ml bottles Isobaric Counterpressure Filling, designed for cider, beer, and other still & sparkling beverages Double Pre-Evacuation with Vacuum Pump, ensuring minimal oxygen pickup for superior product quality 316 Stainless Steel contact parts for superior hygiene and durability Pneumatic Bottle Lifters - overhauled 2025 Twin-channel rinser with final blow-off - overhauled 2025 Crown Cap (26mm caps) Capper Bypass - to feed to other cappers Touch Screen Control Panel for easy operation and monitoring Siemens PLC System, providing precise process automation and flexibility Variable speed control via inverter drive CIP Cups, Cleaning fluid can be recycled Change Parts Included for 250ml, 330ml, 500ml, and 750ml glass bottles Heavy-duty stainless steel frame CE-compliant safety Includes all manuals Spare Parts package Spare Fill tubes - new for adaptation to any bottle fill height Spare filling valve seals etc. Can be loaded to buyer's transport

Condition: new, Year of construction: 2026, ### 🔫 ProfiGun PM-1 powder gun Lightweight, ergonomic, perfectly balanced with a contoured grip. ✋⚖️ Adjust powder output and switch programs directly on the gun. 🎛️ Ceramic cascade up to 100,000 V for efficient charging of all powder types. ⚡ New-generation nozzles improve penetration on complex parts. 🎯🧩 Profiled nut for a secure grip + conductive handle for excellent operator grounding. 🔩🧤 Impact-resistant materials, fully demountable design, replaceable powder path tube. 🛡️🛠️ Patented in the EU and US. Polarity: negative. 🇪🇺🇺🇸➖ One-piece powder path + quick-release hose coupling reduce leaks and speed up hose changes. 🔌✅ ### 💨 ProfiJector powder pump Efficient injector with an optimized feed angle validated by research. 📐🔬 Lower powder and air consumption vs. right-angle injectors, with low running costs. ♻️📉 European patent protected. 🏅 ### 🖥️ PSS controller - 7" touchscreen 7-inch glove-friendly touch panel. 🧤📲 3 auto programs: overcoating, hard-to-reach areas, flat surfaces. 🔁 Fine tuning: 0.1 kV and 0.1 uA resolution. 🎚️ Advanced pneumatic valves for precise air dosing (patent pending) + real airflow measurement to detect drops or blockages. 💨📈⚠️ Diagnostics, program naming, external control via Modbus. 🧠🔧🔌 ### ⚡ ProfiCharge ceramic cascade (made in Poland) High-precision ceramic cascade up to 100,000 V, manufactured in Poland. 🇵🇱⚡ High-frequency ion emission (up to 17,000/sec) improves charging - less powder to the collector, more on the part. 🎯📉 Ultra-precise current control: 0-100 uA, stable even below 10 uA (0-10 uA focus with 0.1 uA steps). 🎛️ ### 💨 Air and application quality features Electronically controlled needle valves + integrated flowmeters for real-time, precise air delivery. 💨✅ Adjustable electrification curve for different powders and demanding parts. ⚙️🧩 Non-stick, puncture-resistant nozzles resist electrical breakdown, reduce clogging, and simplify color changes. 🧼✨ Automatic gun purge (from handle or screen) for faster, cleaner color changes. 🔁💨 ### 🛡️ Safety and compliance Discharge energy below 2 mJ + antistatic hose with double grounding strap. ⚠️🔒 ATEX and EN 50050-2 compliant for potentially explosive areas. ✅ ### 🧠 Productivity and support Quick Program: fast switching via rapid trigger presses. ⚡🎛️ Visual wear counters + fault history, suggestions, and self-monitoring diagnostics. 👀🔧 Up to 8 languages: PL, EN, DE, FR, RU, ES, IT, SV. 🌍 Animated troubleshooter for guided diagnostics. 🧭 Ijdpjyfim Aofx Afhoig Professional mode (hints on/off) + daily and job statistics for order management. 📊⏱️✅

Condition: new, Year of construction: 2026, ### 🔫 ProfiGun PM-1 powder gun Lightweight, ergonomic, perfectly balanced with a contoured grip. ✋⚖️ Adjust powder output and switch programs directly on the gun. 🎛️ Ceramic cascade up to 100,000 V for efficient charging of all powder types. ⚡ New-generation nozzles improve penetration on complex parts. 🎯🧩 Profiled nut for a secure grip + conductive handle for excellent operator grounding. 🔩🧤 Impact-resistant materials, fully demountable design, replaceable powder path tube. 🛡️🛠️ Patented in the EU and US. Polarity: negative. 🇪🇺🇺🇸➖ One-piece powder path + quick-release hose coupling reduce leaks and speed up hose changes. 🔌✅ ### 💨 ProfiJector powder pump Efficient injector with an optimized feed angle validated by research. 📐🔬 Lower powder and air consumption vs. right-angle injectors, with low running costs. ♻️📉 European patent protected. 🏅 ### 🖥️ PSS controller - 7" touchscreen 7-inch glove-friendly touch panel. 🧤📲 3 auto programs: overcoating, hard-to-reach areas, flat surfaces. 🔁 Fine tuning: 0.1 kV and 0.1 uA resolution. 🎚️ Advanced pneumatic valves for precise air dosing (patent pending) + real airflow measurement to detect drops or blockages. 💨📈⚠️ Diagnostics, program naming, external control via Modbus. 🧠🔧🔌 ### ⚡ ProfiCharge ceramic cascade (made in Poland) High-precision ceramic cascade up to 100,000 V, manufactured in Poland. 🇵🇱⚡ Iiedpfx Ajyfik Iofhsg High-frequency ion emission (up to 17,000/sec) improves charging - less powder to the collector, more on the part. 🎯📉 Ultra-precise current control: 0-100 uA, stable even below 10 uA (0-10 uA focus with 0.1 uA steps). 🎛️ ### 💨 Air and application quality features Electronically controlled needle valves + integrated flowmeters for real-time, precise air delivery. 💨✅ Adjustable electrification curve for different powders and demanding parts. ⚙️🧩 Non-stick, puncture-resistant nozzles resist electrical breakdown, reduce clogging, and simplify color changes. 🧼✨ Automatic gun purge (from handle or screen) for faster, cleaner color changes. 🔁💨 ### 🛡️ Safety and compliance Discharge energy below 2 mJ + antistatic hose with double grounding strap. ⚠️🔒 ATEX and EN 50050-2 compliant for potentially explosive areas. ✅ ### 🧠 Productivity and support Quick Program: fast switching via rapid trigger presses. ⚡🎛️ Visual wear counters + fault history, suggestions, and self-monitoring diagnostics. 👀🔧 Up to 8 languages: PL, EN, DE, FR, RU, ES, IT, SV. 🌍 Animated troubleshooter for guided diagnostics. 🧭 Professional mode (hints on/off) + daily and job statistics for order management. 📊⏱️✅

Condition: refurbished (used), functionality: fully functional, type of input current: AC, input voltage: 400 V, D&K JupiterAutomated B2 Laminator Refurbished and in excellent working condition. Key features and specifications: Iijdpfszzmr Hex Afheg - Model: D&K JUPITER 5474 (automatic laminating machine). - Controls: PLC with touchscreen interface; daily and total counters provided. - Pressure and handling: adjustable pneumatic pressure; automatic sheet separation via a bursting roller; adjustable anti-blocking during production. - Heating: robust chrome-plated heated cylinder with oil bath. - Sheet size range: minimum 210 mm × 220 mm; maximum 540 mm × 740 mm. - Supported paper weights: 115 gsm to 450 gsm. - Feeder: automatic feeder with a stated capacity of 80 cm. - Film thickness: from 22 µ to 42 µ. - Operating speed: 30 meters per minute. - Electrical: 400 volts (3 × 16 A); power:7 kW. - Physical: dimensions H = 1400 mm × W = 1950 mm × D = 1200 mm; weight 650 kg.

Condition: new, Year of construction: 2026, Aluminum circular saw UK 352 P, manual The UK 352 P semi-automatic circular saw is an "upcut" machine and is used predominantly Used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple miter angle adjustment. The UK 352 P has an infinitely adjustable miter range left up to 45° and right up to 0° The saw feed takes place automatically at the touch of a button, the material is clamped using two pneumatically controlled vertical clamping cylinders. Connections for a chip extraction system are available on this machine. equipment manual guiding of the saw blade Double miter 30° - 90° - 0°, large support plate, powerful drive motor Clear control panel Two vertical pneumatic clamping cylinders Fixed material positioning jaw, can be used to enlarge the cutting performance can be shifted backwards large protective hood, covers the entire work area minimum lubrication system Air gun to clean the machine Saw blade ø 350 mm workflow 1) Setting the cutting angle 2) Loading the material 3) Bring the clamping cylinder up to 20 mm of material 4) Pneumatic clamping of the material 5) Press the start button to start the saw blade 6) the saw cut must be carried out manually with a hand lever 7) after the end of the cut, the machine is switched off! It is always possible for you to inspect the desired system in our production/demonstration hall. Iiodpsidunvsfx Afhsg Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 700 kg, workpiece height (max.): 2,300 mm, workpiece length (max.): 6,000 mm, insulation material: Mineralwolle, insulation thickness: 150 mm, workpiece width (max.): 2,000 mm, Equipment: lighting, Complete system with chemical pretreatment (7 zones) for GSB certification (QUALICOAT) (suitable for multi-metal processing) All dimensions and further modifications can be considered during design and planning. The offer includes the following components: Pretreatment booth incl. reverse osmosis system Walk-in coating booth Powder gun Powder curing oven Dryer Manual conveying system Lift/lower station Electrical control Details: 1. Walk-in cleaning booth, pretreatment for steel and aluminum The cleaning booth is designed for automatic cleaning, using medium pressure spraying. The booth contains 7 different spray tanks. The maximum part dimensions are L = 6000 mm, W = 2000 mm, H = 2300 mm. 1 Booth dimensions Length 6,500 mm Width 3,000 mm Height 3,600 mm 2 Dimensions of complete pretreatment system Length 6,600 mm Width 4,640 mm Height 4,300 mm 1. Process Degreasing/Neutral etching Heated tank, 50-55°C, time = 3-6 minutes, draining time = 80 seconds 2. Process Acidic mineral etching Heated tank, 50-55°C, time = 3-6 minutes, draining time = 80 seconds 3. Process Rinse 1 Rinsing with ambient temperature in this chamber, time = 0.75-1.5 minutes, draining time = 1 minute 4. Process Rinse 2 Rinsing with ambient temperature in this chamber, time = 0.75-1.5 minutes, draining time = 45 seconds. 5. Process Rinse 3 Rinsing with ambient temperature in this chamber, time = 0.75-1.5 minutes, draining time = 45 seconds 6. Process Nano-ceramic coating This process uses ambient temperature, time = 0.75-1.5 minutes, draining time = 60 seconds 7. Process Overhead spray ring for post-rinsing after process 6 Rinsing with ambient temperature in this process, time = 1 minute, draining time = 60 seconds 8. Process Passivation, no-rinse for aluminum Rinsing with ambient temperature in this chamber, time = 2-3 minutes, draining time = 1-2 minutes 1.1 Reverse Osmosis System Reverse osmosis system 250 liters/hour 1.2 Oil skimmer Tank No. 1 is equipped with an oil skimmer “UniSkim-21-100”. Design: The spray system is in 2 parts and is movable, and is moved up to 500 mm via a pneumatic sliding system. The return feed to the tanks is also movable via a pneumatic sliding system with 7 positions, designed to serve the 7 tanks. 2. Walk-in coating booth 1 Booth dimension Length 7,400 mm Width 4,000 mm Height 3,236 mm 2 Booth dimension incl. extraction system Length 8,552 mm Width 6,232 mm Height 4,393 mm The booth has 2 pneumatic doors on one side for the entry/exit of workpieces, and an additional side door for the coating operator. 3. Wagner powder coating system, manual system “Sprint 2 B” 4. Powder curing oven 1 Internal dimension Length 6,500 mm 2 Internal dimension Width 2,200 mm 3 Internal dimension Height 3,416 mm 5. Dryer 1 Internal dimension Length 6,500 mm 2 Internal dimension Width 1,200 mm 3 Internal dimension Height 3,416 mm Iiodsffv Tpjpfx Afheg 6. Manual conveying system The conveying system consists of: The conveying system is designed for a crossbar weight of 700 kg, the trolley carries a maximum of 2,000 kg on 3 rails.

Condition: new, power: 335 kW (455.47 HP), fuel type: diesel, overall weight: 25,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal Number: #583 Mercedes-Benz Arocs 2546 6x2 with combined high-pressure flushing and suction tank body, ADR Type K 14.0 / 28 PE This Mercedes-Benz Arocs 2546 6x2 with a combined KROLL high-pressure flushing and suction tank body is a NEW vehicle in a complete ADR L4BH configuration. Equipped with a VacuStar 1600, Uraca KD 718, large hose storage cassette, telescopic boom, and extensive special equipment, it is immediately ready for the most demanding sewer, industrial, and hazardous material operations. Iiedpfxszuiyas Afhog Body ? Manufacturer: KROLL Fahrzeugbau-Umwelttechnik GmbH ? Tank material: S355J2+N (St 52.3) ? ADR suction/pressure tank Type K 14.0 / 28 PE ? Extension piston with 3 locking points: ? 3,300 l water / 10,600 l sludge ? 5,500 l water / 8,200 l sludge ? 7,700 l water / 6,000 l sludge ? Suction from open bodies of water possible ("comfort version") via cassette boom with integrated filter ? Tank wagon equipment ADR - Type class AT/FL L4BH ? Emptying via pneumatically operated piston ? Sludge water drain DN80 for pumping back via the boom into the sewer ----Vacuum system ? CVS VacuStar 1600 - approx. 1,550 m³/h at 400 mbar ? Approx. 20 m HD hose DN125 ? Hose storage cassette with simultaneous telescopic boom DN125 ? Parallel routing of suction and HD hose via boom ? Right-hand suction hose reel (hydraulic) with 30 m DN75, can be suctioned through ----High-pressure system ? Uraca KD 718 - approx. 315 l/min at 170 bar ? Large HD hose reel for 240 m DN25, 180° swiveling ? Equipped with 160 m DN25 ? Small HD hose reel for 80 m DN13 (hydraulic) ? Equipped with 80 m DN13 ----Special features ? Hose storage cassette with telescopic boom DN125 ? Infinitely adjustable height of the suction hose (hydraulic, roller guide carriage) ? Boom arm hydraulic, telescopic, 180° swiveling ? ADR L4BH incl. EX/II, EX/III and AT ? Spray gun ? LED rotating beacons ? LED ambient lighting ? Working functions remotely controlled via CAN-BUS ? Radio remote control with 14 functions ? Hot water hand wash basin ? Large equipment cabinet at the rear left (e.g. for a push camera) ? Reversing camera with 7" color monitor (day/night mode) ? Soundproofing cladding in front of the pump compartment ? Large equipment box ? Tool box ? Holder for traffic cones ? Vise ? Ladder ? Large advertising panels on the right and left ---- Conclusion A fully equipped, new Arocs/KROLL combination vehicle with a powerful suction unit, 315 l/170 bar HD system, ADR L4BH, and extensive special equipment. Ideal for professional companies with the highest technical requirements. For further detailed information and/or images, please contact us directly. A large selection of other vehicles for PURCHASE or RENT can be found at: Subject to changes, prior sale, and errors. The buyer is obliged to independently verify the condition and equipment of the goods. The sale is made exclusively subject to our terms and conditions and with the exclusion of any warranty.

Condition: new, Year of construction: 2024, operating pressure: 140 bar, total length: 800 mm, total height: 1,700 mm, total width: 1,000 mm, water tank capacity: 95 l, power: 3 kW (4.08 HP), temperature: 45 °C, TurboClean Evo II is a professional high-pressure washer made of stainless steel. The washing process takes place in closed circuit with water with special detergent with max. temperature 45oC. Working pressure is 140 bar, thereby hard to reach places and heavily soiled items of carbon deposits, grease or oil can be thoroughly washed. The flap is equipped with pneumatic drives, to increase the safety and the quality of work the washing machine. It is also equipped with oil skimmer, a brush and an air gun. There are cleaning nozzles installed on the window, which improve visibility and ease of work. Ijdpeq Ru Amefx Afhsig It is a perfect solution for workshops and parts remanufacturing. Manufactured in Poland.

Condition: like new (used), Year of construction: 2018, functionality: fully functional, pressing force: 2 t, table width: 330 mm, table length: 350 mm, throat depth: 100 mm, air pressure: 6 bar, cylinder diameter: 28 mm, For sale in new condition HYUNDAE HP-2000 2t PNEUMATIC PRESS Brand: HYUNDAE MACHINERY & ELECTRIC CO.,LTD Type: HP-2000 manufacturing of year: 2021 Max. pressing force: 2t open height:300mm Bolster Size: 350x330mm Stroke length: 100mm Cylinder diameter: 28mm built on a press stand Two-handed operation Voltage: 110V Air Connecting Hose Diameter:12mm Iiodjvbfbwspfx Afhsg

Condition: new, axle configuration: 3 axles, loading space volume: 35 m³, total width: 2,550 mm, total height: 3,940 mm, Year of construction: 2026, Equipment: ABS, O.ME.P.S Silo Trailer ---- Type: CM 35 (Horizontal Silo) Axles and Suspension: Disc brakes 22.5" SAF axle assemblies, 3 x 9t with air suspension, axle spacing is 2 x 1310 mm, raising and lowering valve, loading pressure gauge on top of the tank, Wabco Smartboard, Wabco tire pressure monitoring system, 1st axle liftable without tractor equipment, 3rd axle liftable with Wabco Optiturn. Rims and Tires: 6 wheels with 385/65 R22.5 tires, manufacturer’s choice, on Alcoa Ultra One aluminum rims, size 11.75 x 22.5 ET 120. Brake System: EBS 4S/2M WABCO air brake system with RSS, according to standard 98/12/CE - ECE R13/09, brake wear indicator connected. Landing Gear: Mechanical landing legs with two speeds, 2 x 20t support load, with pivoting foot. Electrical System: All lights in LED version, 24 volt electrical installation consisting of: one 15-pin socket mounted in front of the kingpin on the chassis carrier, yellow side marker lights in prescribed quantity, rear position lights, front marker lights, rear license plate lights, lights according to standards 97/28/CE-2007/35/CE, 2 multi-chamber rear lights mounted at turntable height in aluminum brackets as per standards 97/28/CE-2007/35/CE, 2 rotating LED work lights mounted top left and right on the tank, yellow warning light at rear at hose pipe height, 2 x reversing lights in underrun protection, 2 x reversing lights at leg height (each separately switchable from the energy console). Tank Design: A horizontal tank made of aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn), single-chamber tank, with a capacity of 35,000 liters, tank warranty: 24 months from delivery, kingpin 2" according to standard 94/20/CE Operating Parameters: Pressure vessel as per the Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 Bar – operating pressure 2.0 Bar, operating temperature -40° to +80° Filling Options: 3 manholes DN 450 with swiveling and folding dome lids. Each dome lid is pressure-tight, secured with 4 wing nuts, support for dome lids on top for storage, rain channel closed at front – open at rear. Material Discharge: 2 product outlet cones with synthetic fabric inserts for fluidizing, individual discharge lines DN 100 made of steel and connected to the rear, 2 pinch valves DN 100 AKO in the lines, DN 100 ball valve with ring nozzle, remote control for the ball valve and Storz A coupling at the end of the discharge line. Air Piping: A 2.5" stainless-steel air manifold installed on the right-hand operation side. The air line is routed to the front up to the end of the silo with a check valve and DN 65 connection hose for compressor with Storz-B coupling. The air manifold is equipped with ball valves for top air, auxiliary air, and fluidization. Top air 2" rear right, PRESSURE LINE INLET REAR RIGHT, external air intake Storz C at the air line tube, pneumatic connection with blow-off gun and spiral hose on top of the walkway near the access ladder, 1 x vibrator on top of the tank, air line located centrally on the walkway for cleaning with gun, air line below in tool box for cleaning with gun. Ladder and Access: Isdpfxjx Nufyj Afheig 1 aluminum ladder mounted at the rear left of the vehicle, 1 pneumatic aluminum safety scissor handrail with locking system acting on the brake, 1 aluminum...

Condition: excellent (used), functionality: fully functional, pressing force: 3 t, Force 32 kN, stroke 100 mm Iisdpfx Afszxmhpehjg

Condition: excellent (used), Year of construction: 2020, S016059 PROD. ALUP TYPE SCK30 CE S/N ITJ370650 YEAR 2020 POWER (kW) 22 CAPACITY (m3/min) 3.22 m3/min PRESSURE (bar) 10 Ijdpfx Afoz A Tm Deheig HOURS (RUNNING/TOTAL) 0 (new controller) INVERTER NO BUILT-IN DRYER NO EXCHANGER NO COOLED (AIR/WATER) AIR ON TANK NO DOCUMENTS YES CONNECTION NEW/USED Used

Condition: new, maximum load weight: 25,300 kg, overall weight: 38,000 kg, axle configuration: 2 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately or at short notice, on our website. Excerpt from the equipment details. Full specifications available upon request. Neck (Gooseneck) * Gooseneck in SNT design to optimize loading platform length * Approx. 3,750 mm long, hydraulically liftable/lowerable and detachable * Technical fifth wheel load: 25,000 kg For tractors: 4x2 and 6x2 Kessel Bridge (Tiefbett section) * Low bed designed as extendable Kessel bridge in SUPER LOW design * Approx. 6,850 mm length * With mechanical locking * Service lines routed protected inside the extendable beams, automatically adjusting to match the low bed’s length Rear Chassis * Short version with closed outer frame and checker plate cover * Chassis with excavator trough, closed at the rear half to accommodate air tanks Axles * BPW axles and suspension, all axles hydro-mechanically forced steered * Technical axle load: 12,000 kg per axle * Air suspension with lifting and lowering valve Tires * GOODYEAR KMAX T 3PMSF (M+S) 245/70 R 17.5 twin tires. Load index 143/141J (146/146F) Brake system Iijdpfx Asv Sw E Aefhsg * Brand: WABCO, EBS-E according to EU regulations, without connection cable to the tractor unit Paintwork * 6-Coat final treatment * All-steel construction shot-blasted after welding * 1 layer of zinc-based primer * 1 layer of adhesion primer. Final coating with 2 coats of 2-component acrylic paint in a single color, followed by cavity sealing with special wax Trailer color * RAL 3002 Carmine Red * Rim color: Silver grey * Drop side color: Natural aluminum Accessories included * Removable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for hydraulic operations (except for hydraulic winches). Without supply connection installed on tractor unit * Spare wheel carrier in front of the gooseneck front wall * Side beams of the gooseneck with fixing holes for bolted lashing rings; first hole approx. 200 mm from the front, then at approx. every 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring each left and right on the rear taper of the gooseneck (LC 6,000 daN) * 2" king pin * Hydraulic cross member for supporting the gooseneck on the tractor unit or a dolly * Air connection with air gun at the gooseneck * 1 pair of steel ramps with climbing strips and securing pins to bridge the mountings of the low bed * 1 lashing ring each left and right on the front cross member (LC 10,000 daN) * Outer side beams of the loading area prepared for removable loading floor * Lashing rings with retaining spring at approx. every 1,200–1,300 mm on the inside carrier’s exterior of the loading area * Lashing rings with retaining spring at approx. every 1,200–1,300 mm on the outer carrier’s exterior of the loading area (LC 10,000 daN) * Cut-outs above the lashing rings in the outer carrier’s upper flange * Mechanical pin-tab coupling from low bed to rear chassis, for swapping the loading floor or installing extension beams, with electro-pneumatic-hydraulic couplings * The outer carriers of the low bed coated with anti-slip sand finish for slip resistance * 2nd ride height for high ride position, max. ± 50 mm from normal ride position, without installation of controls from the tractor unit * 1 pair lashing rings with retaining spring at the transition from the low bed to the excavator trough (LC 10,000 daN) * Front and rear tapers

Condition: new, mileage: 500 km, power: 350 kW (475.87 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, total width: 2,550 mm, total height: 3,850 mm, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ Internal number: #550 Mercedes-Benz Arocs 6x2 L with combined high-pressure flushing and suction pressure tank body with water recovery, KROLL Type K 1.0-13.0/29 P Body by KROLL Fahrzeugbau-Umwelttechnik GmbH * HOSE STORAGE CASSETTE WITH SIMULTANEOUS TELESCOPIC BOOM DN 125 * Reach on pivot side 5,200 mm * Tank material S355J2+N (St. 52.3) * Water recovery unit * Sliding piston with 3 locking positions * (3,300 l water / 10,600 l sludge, 5,500 l water / 8,200 l sludge, 7,700 l water / 6,000 l sludge) * Suction from open water sources possible - "comfort version" via cassette boom with integrated filter * DISCHARGE: by pneumatically operated piston * SLUDGE WATER DRAIN DN 80: for backflowing dirty water over the boom into the sewer * Manhole DN500 Chassis Mercedes-Benz Arocs * 2548 L 6x4 * Powershift 3 * 476 HP / 350 kW * EURO 6e * Fuel capacity 510 l * Driver’s cab color MB 9147 Arctic White * 2x LED beacon lights on cab * Rearview camera * Navigation system * Air conditioning Vacuum system * Samson Truck Master 2,500 ca. 2,465 m³/h at 400 bar * Drive: elastic, via drive shafts, V-belts and pneumatically actuated friction clutch from the vehicle engine PTO * Approx. 20 m HD hose DN 125 * HOSE STORAGE CASSETTE WITH SIMULTANEOUS TELESCOPIC BOOM DN 125 * Reach on pivot side 5,200 mm * Additional suction hose reel with suction on rear right with approx. 30 m DN80 suction hose High-pressure system * Uraca P 3-45 approx. 345 l/min at 205 bar * Drive: elastic, via drive shafts, V-belts and pneumatically actuated friction clutch * Approx. 240 m HD hose DN 25 * Large HD hose reel for 240 m, 1” DN 25, swiveling 180° * Equipped with 240 m DN25 * Small HD hose reel for 80 m DN 13, hydraulically operated * Equipped with 60 m DN13 Features * Hose storage cassette with telescopic boom DN 125 * Stepless height adjustment of suction hose, hydraulically via roller guide trolley * Boom arm for suction hose hydraulically operated, telescopic, and swivels 180° * KROLL water recovery system WRS1 with self-cleaning function * Pressure-speed control * Spray gun * LED beacons * LED perimeter lighting * Remote control of working functions via CAN-BUS technology * CAN wireless remote control * Hand-wash unit (hot water) * Rearview camera with 7” color monitor incl. day/night switch * Acoustic enclosure in pump area * WATER SHORTAGE WARNING SYSTEM: with buzzer in main control cabinet and automatic pump cut-off * RESIDUAL WATER DRAINAGE: pneumatically operated for all water-carrying components, with connection to truck compressed air system * Large equipment box and hose trays * Toolbox * Holder for traffic cones * Vice * Ladder * Electric cable winch * Mount for fall protection device * Pulley for banana/guide device Isdpfxeyawvze Afheig * Large advertising boards right and left * Manhole DN500 Technical data GVW 26,000 kg * Unladen weight approx. 20,700 kg * Length 9,800 mm * Height 3,890 mm * Width 2,550 mm * Wheelbase 4,200 mm For further details and/or pictures, please contact us directly. A wide selection of further vehicles for PURCHASE or RENT can be found at: Modifications, prior sale, and errors excepted. The buyer is obliged to independently ascertain the condition and equipment of the goods. Sale exclusively according to our terms and conditions and under Au...

Condition: new, Year of construction: 2017, functionality: fully functional, machine/vehicle number: API793297, overall weight: 1,431 kg, power: 37 kW (50.31 HP), pressure (max.): 8.6 bar, type of cooling: air, Equipment: documentation/manual, type plate available, BRAND NEW UNUSED Isdpfxoxbtk No Afhjig Here we have a rare opportunity to purchase an 100% oil free air cooled variable speed drive twin stage rotary air compressor. Still on the manufacturers pallet from the factory in Belgium Energy efficient VSD machine

Condition: like new (used), Year of construction: 2007, functionality: fully functional, type of input current: AC, pressing force: 1 t, table width: 200 mm, table length: 230 mm, total width: 400 mm, total height: 860 mm, overall weight: 105 kg, air pressure: 6 bar, FCP-C 10KN pneumatic press machine for sale in several pieces manufacturer: FCP-C pressing force 1 ton Stroke: 75-100 (mm) Air pressure 0.2-0.5 MPa Open height 320 (mm). two-hand operation table size: 200x230mm Shaft dimensions Bore diameter φ15H9 (mm) x depth 35 (mm). Speed ​​controller Low friction roller Isdpfxev E Sazs Afhsig Rotation stop lever height: 880mm length: 360mm width:400mm weight: 105kg Many options (timing box with counter, load management device, etc.). ●The lowering speed of the press can be freely adjusted by the speed controller. ●Mechanical stop for bottom dead center adjustment. ●Inching operation valve for smooth forming. ●Air equipment is also standard.

Condition: used, Year of construction: 1998, machine/vehicle number: 9083432, functionality: fully functional, Pneumatic press 125 tons Iiodeyzhqyjpfx Afhsg

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, paper weight (min.): 65 g/m², paper weight (max.): 300 g/m², product length (max.): 320 mm, product width (max.): 620 mm, TECHNICAL DETAILS Minimum paper size: 120 × 210 mm Maximum paper size: 320 × 620 mm Paper weight: 65–300 g/m² Booklet heads: 2 ISP booklet heads Maximum book thickness: 10 mm Maximum page count: approx. 200 pages at 80 g/m² Staples per spool: approx. 50,000 EQUIPMENT Plockmatic Morgana BM 5050s Booklet Maker VFX high-performance feeder with vacuum feeder CST 5000 creasing and 2-sided trimming module for head and foot trimming FM 5000 finishing module for front trimming BEST 4000-1 extended conveyor stacker Anti-static kit for VFX feeder Anti-static kit for CST 5000 Iijdpfx Ajzzp Scofheg